I'm using an LS990 that I've had since about when they came out. When Stumproot came out I rooted it, and I had installed the original TWRP Bump when that came out, but I've been running the rom it came with (ZV4 I believe, though I cannot check). Nothing had been unusual until today, when I put the phone in my pocket after using it for normal daily stuff, then when I later took it out it seemed to be in TWRP. I had almost never even booted into it on the G3 other than a very few times when I first installed it (I had been waiting for a CM12 that was stable enough for my liking).
No matter what I do, it seems to be stuck in recovery. I've updated to the latest TWRP (2.8.4.0) and that seemed to take just fine. However, when I try flashing a rom, it just flashes like normal, log says it's great, then....reboot takes me back into recovery. I tried the ZV4 base at first, then the ZV6 base, both with and without wiping all the appropriate partitions, but nothing seems to change. I am getting ready to try non-stock roms, but I thought I'd ask here first to see if anyone has any ideas? Any help much appreciated!
(not worried about my data, I had daily TB backups running which uploaded to Dropbox, so it's all saved, willing to wipe anything and everything)
Click "format data" under the "wipe" section this will wipe EVERYTHING so make sure you have the latest twrp then on your computer save a rom. Wipe the phone via twrp and then plug the phone it and wait for either Adb sideload or mtp. Personally I feel that mtp is the best just because you can move anything to your phone. Then just move the rom you want to the root of the sdcard (Every folder will be gone). Then flash it and hope that fixes it but if it dosent you may need to use the lg flash tool (windows) and flash the zv4 files. This will make you back on zv4 meaning restump root reflash twrp. The whole nine yards, just try the twrp thing first and if that dosen't work then do the flash tool. I am not responsible if you listen to me and your device breaks
bucketachicken said:
I'm using an LS990 that I've had since about when they came out. When Stumproot came out I rooted it, and I had installed the original TWRP Bump when that came out, but I've been running the rom it came with (ZV4 I believe, though I cannot check). Nothing had been unusual until today, when I put the phone in my pocket after using it for normal daily stuff, then when I later took it out it seemed to be in TWRP. I had almost never even booted into it on the G3 other than a very few times when I first installed it (I had been waiting for a CM12 that was stable enough for my liking).
No matter what I do, it seems to be stuck in recovery. I've updated to the latest TWRP (2.8.4.0) and that seemed to take just fine. However, when I try flashing a rom, it just flashes like normal, log says it's great, then....reboot takes me back into recovery. I tried the ZV4 base at first, then the ZV6 base, both with and without wiping all the appropriate partitions, but nothing seems to change. I am getting ready to try non-stock roms, but I thought I'd ask here first to see if anyone has any ideas? Any help much appreciated!
(not worried about my data, I had daily TB backups running which uploaded to Dropbox, so it's all saved, willing to wipe anything and everything)
Click to expand...
Click to collapse
Have you tried this?
http://forum.xda-developers.com/lg-...trying-ota-t2907508/post56061720#post56061720
Thanks, I did get it working. I have no idea how, but my data was all still there, despite wiping several times....but the recovery fix is what worked. I also got that lg flash tool setup so hopefully that will be helpful if I run into future problems. I honestly think after all that mess I may try the CM12 roms now, even if they still have some daily bugs, cause I was almost sad to see it boot back up into the LG stock rom...
Thanks again!
I honestly think after all that mess I may try the CM12 roms now, even if they still have some daily bugs, cause I was almost sad to see it boot back up into the LG stock rom...
Thanks again![/QUOTE]
Here is a cm12 rom that is almost perfic: http://forum.xda-developers.com/sprint-lg-g3/orig-development/cyanogenmod-12-beta-ls990-t2958197
It's the one I use everyday and I have seen almost no bugs
Related
Hi all,
I have a Droid incredible 4g (stock, unrooted/unlocked, w/ the recent OTA update). I saw the Bootloader Unlock exploit in the developer's forum so I gave it a go, and it worked fine. Then I installed the Viper 1.0 ROM, but I haven't been able to get it to do anything after successfully booting except run through a loop of errors such as "Unfortunately, the process android.process.acore has stopped working." After I click "OK" on about 10 critical errors, it self-reboots and does the whole thing again.
Unfortunately, I didn't do a backup this time, so I have nothing to restore (first time I haven't done a backup, but also the first time I've ever had any kind of an issue w/ a ROM). I tried using the HTC Android ROM Update Utility 1.0.5.2011 that I found in the dev forum, but that didn't work either. Finally, I installed 2.17.605.2 Verizon Global Sense4.1 Android 4.0.4. It's a lot more stable than Viper was and the phone is basically usable, but I still get lots of critical errors. So this morning I went back to the forum and saw that I needed to downgrade to the old 1.43.605.3 kernel. I tried that and then reinstalled Viper 1.0, but it seemed to have no effect--still stuck in a critical error/reboot loop.
I realize that's the risk of playing with ROMs and I should have done a backup, but anyone have any ideas on how I can get my phone back and running?
Thanks!
Even though it explicitly stated you didn't need to do a backup, I did one anyway, to prevent something like this from happening. Always do a backup.
Did you verify the MD5Sum of ViperLTE?
Did you go to Recovery and Wipe -> Factory Reset and Wipe -> System both twice before trying to install the ROM?
Did you change anything in the ROM before attempting to load it?
There are lots of questions we could ask to ascertain the root of the problem, but these three are among the most important.
Wi-Fi won't work without the old boot.img, and from what I can tell, that's the only thing. It doesn't give critical errors.
I'm thinking since you are new to root you were un-aware the need to wipe before installing a rom.
im thinking that is the issue.
Thanks for the reply!
I didn't check the MD5 last night but I did just now and it matches.
I did a cache wipe the first time but not a system wipe. Then I started getting more desperate and tried reinstalling w/ system wipes and factory resets, but it didn't change anything.
No, I didn't change the ROM. Doing the Bootloader unlock exploit was about the absolute maximum of my technical abilities! The only thing I know I did wrong was that I didn't downgrade to the old boot version the first time (mainly because the wifi thing sounded inconsequential and I didn't want to learn the procedure if I didn't have to).
Anyway, I just tried Ultimate KangBang and it seems to work--no error messages so far. I don't know what I did wrong, but hopefully this keeps working!
IceDragon59 said:
Even though it explicitly stated you didn't need to do a backup, I did one anyway, to prevent something like this from happening. Always do a backup.
Did you verify the MD5Sum of ViperLTE?
Did you go to Recovery and Wipe -> Factory Reset and Wipe -> System both twice before trying to install the ROM?
Did you change anything in the ROM before attempting to load it?
There are lots of questions we could ask to ascertain the root of the problem, but these three are among the most important.
Wi-Fi won't work without the old boot.img, and from what I can tell, that's the only thing. It doesn't give critical errors.
Click to expand...
Click to collapse
andybones said:
I'm thinking since you are new to root you were un-aware the need to wipe before installing a rom.
im thinking that is the issue.
Click to expand...
Click to collapse
Yes, I took a short-cut that didn't quite work out. I didn't want to wipe the system because I wasn't sure if my pictures would be wiped too, but then when everything died I tried wiping everything and reinstalling and it didn't seem to improve anything. I did end up losing my pictures too. Oh well. Maybe it's just a combination of stuff I did to try to get things working (there was some trial and error in unlocking the bootloader but I did get that to work finally, and then more trial and error with the ROMs).
I guess the best thing to do is leave the phone the heck alone as long as it's working, for now. I just don't know why nothing seemed to work--I thought factory reset/fresh ROM would do it.
franklin411 said:
Yes, I took a short-cut that didn't quite work out. I didn't want to wipe the system because I wasn't sure if my pictures would be wiped too, but then when everything died I tried wiping everything and reinstalling and it didn't seem to improve anything. I did end up losing my pictures too. Oh well. Maybe it's just a combination of stuff I did to try to get things working (there was some trial and error in unlocking the bootloader but I did get that to work finally, and then more trial and error with the ROMs).
I guess the best thing to do is leave the phone the heck alone as long as it's working, for now. I just don't know why nothing seemed to work--I thought factory reset/fresh ROM would do it.
Click to expand...
Click to collapse
If UKB ROM works then Viper ROM will too, installing the boot.img is very simple it's one command
I can help you with that if you'd like
in recovery before installing ROM, do a wipe of, (I go in this order, but it doesn't matter.)
1) Factory Reset
2) System
3) Cache
4) Dalvik Cache
then install the ROM
just DO NOT do External storage (unless of coarse u WANT to wipe your SD-Card.)
as long as you don't wipe External Storage you won't lose anything that's on your SD-Card.
in the future it is always good practice to backup(nandroid) your current ROM. I have been burned too many times, always do a nandroid before you do anything in recovery.
your photos are normally saved to the SD, flashing ROMs or wiping the system will not delete them
andybones said:
If UKB ROM works then Viper ROM will too, installing the boot.img is very simple it's one command
I can help you with that if you'd like
in recovery before installing ROM, do a wipe of, (I go in this order, but it doesn't matter.)
1) Factory Reset
2) System
3) Cache
4) Dalvik Cache
then install the ROM
just DO NOT do External storage (unless of coarse u WANT to wipe your SD-Card.)
as long as you don't wipe External Storage you won't lose anything that's on your SD-Card.
Click to expand...
Click to collapse
It worked this time! Maybe the difference was that the boot.img file I downloaded was called "boot_signed.img" or something. I had no idea what it was supposed to look like, so I installed it that way and it didn't work. Then I tried renaming it to "boot.img" this morning and installing viper, but that didn't work. And then I restarted and installed UKB, and it worked. Just now I wiped and tried again with Viper and it's working fine. Maybe I did something this morning that caused it not to take properly when I tried with Viper, and then I reset and it worked.
Thanks for the help!
franklin411 said:
It worked this time! Maybe the difference was that the boot.img file I downloaded was called "boot_signed.img" or something. I had no idea what it was supposed to look like, so I installed it that way and it didn't work. Then I tried renaming it to "boot.img" this morning and installing viper, but that didn't work. And then I restarted and installed UKB, and it worked. Just now I wiped and tried again with Viper and it's working fine. Maybe I did something this morning that caused it not to take properly when I tried with Viper, and then I reset and it worked.
Thanks for the help!
Click to expand...
Click to collapse
na the name has nothing to do with it. it can be named whatever.
im guessing the wipe worked.
franklin411 said:
Hi all,
I have a Droid incredible 4g (stock, unrooted/unlocked, w/ the recent OTA update). I saw the Bootloader Unlock exploit in the developer's forum so I gave it a go, and it worked fine. Then I installed the Viper 1.0 ROM, but I haven't been able to get it to do anything after successfully booting except run through a loop of errors such as "Unfortunately, the process android.process.acore has stopped working." After I click "OK" on about 10 critical errors, it self-reboots and does the whole thing again.
Unfortunately, I didn't do a backup this time, so I have nothing to restore (first time I haven't done a backup, but also the first time I've ever had any kind of an issue w/ a ROM). I tried using the HTC Android ROM Update Utility 1.0.5.2011 that I found in the dev forum, but that didn't work either. Finally, I installed 2.17.605.2 Verizon Global Sense4.1 Android 4.0.4. It's a lot more stable than Viper was and the phone is basically usable, but I still get lots of critical errors. So this morning I went back to the forum and saw that I needed to downgrade to the old 1.43.605.3 kernel. I tried that and then reinstalled Viper 1.0, but it seemed to have no effect--still stuck in a critical error/reboot loop.
I realize that's the risk of playing with ROMs and I should have done a backup, but anyone have any ideas on how I can get my phone back and running?
Thanks!
Click to expand...
Click to collapse
weird, i was having the same problem with the same processes stopped working. i wiped cache dalvik and system but not factory reset. once i factory reset, it worked fine. i figured a system wipe would have been enough....
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
dar101978 said:
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
Click to expand...
Click to collapse
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
CalcProgrammer1 said:
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
Click to expand...
Click to collapse
Thanks thats what i did, I just basically had to use KIES to use the emergency recovery, then root my phone again. My question is what version of TWRP causes this? cause i used the newest version i could find off GOO. My other concerne is, will it accept or be safe to use a custom ROM? Well i gues ill find out :laugh: THANKS AGAIN!
Everyone with the sgh-i717 is having problems with the latest TWRP and the most stable version is 2.5.0.0. Go with that one or you'll be starting all over again I imagine. And don't just stop at the download link in the OP's, read the thread and find out what's going on. The problems with TWRP have been going on for a while and the development threads have a lot of comments about the latest build causing problems. Good luck! :good:
Before I decided to flash cm12 I made a backup of my original rom with TWRP. Then I flashed cm12, and to be honest, I'm not really impressed. The rom itself is great, but has a lot of bugs, and I think our stock version is more customizable, especially because of the Xposed framework, which is not yet (or just not) supported for Lollipop.
So, I tried restoring back to stock several times, but every time it stuck in boot loop. So I had to flash cm12 again, and it worked without any problems.
So, why can't I get my stock back? Is there something I'm missing here?
If anyone of you know, or just have a opinion about this I would be most happy.
(I think it's kernel related but I'm not sure, and can't really do anything at this point, so I'm kinda stuck with Lollipop for now)
Any help will be more than appreciated. Thanks.
Enigma. said:
Before I decided to flash cm12 I made a backup of my original rom with TWRP. Then I flashed cm12, and to be honest, I'm not really impressed. The rom itself is great, but has a lot of bugs, and I think our stock version is more customizable, especially because of the Xposed framework, which is not yet (or just not) supported for Lollipop.
So, I tried restoring back to stock several times, but every time it stuck in boot loop. So I had to flash cm12 again, and it worked without any problems.
So, why can't I get my stock back? Is there something I'm missing here?
If anyone of you know, or just have a opinion about this I would be most happy.
(I think it's kernel related but I'm not sure, and can't really do anything at this point, so I'm kinda stuck with Lollipop for now)
Any help will be more than appreciated. Thanks.
Click to expand...
Click to collapse
not sure, but try this: after flashing stock firmware, turn on the phone by pressing volume down and power at the same time, then release them when the logo appears and right after that press them again, that should do the trick
Yeah, and that trick would be going into recovery mode, but thanks anyway.
Read my post here : http://forum.xda-developers.com/showpost.php?p=58926158&postcount=3
If nothing works go back to stock, root it again and restore your apps...
Hi all. I just got my factory warranty back and I attempted to root it. Everything went as it should, until just after the install finished. Instead of rebooting normally, it now will only reboot into TWRP. Once there, when I try to flash a custom ROM (in this case, Bliss, but I don't think it matters, I get an error message that says the zip file is corrupt. Then, while still in recovery, when I tried to wipe everything except the sd card, it says mkfs.fat process ended with error. I then powered down and attempted the factory reset. I scrolled down on both screens and it did not say anything about any errors, so I assumed it took. However, it reboots right back into TWRP recovery. It also boots right to TWRP recovery when I try to boot normally. Of course, adb does not recognize the phone in any mode that I can get into (fastboot/recovery/download), so, I can't use LG Bridge to reflash the original firmware. Does anybody have any ideas for a fix? I know that this replacement phone had 6.0 on it. I thought I did everything to a t? TIA...
OK, not sure how I got there, but when I attempt to reboot from TWRP it says No OS Installed! Are you sure you want to reboot? That at least says what the problem is. Does anybody know how to fix this?
you have the latest twrp recovery? Just make sure you have 3.0 or higher and then try flashing again. And IMO the blissrom isnt worth using unless you dont mind smaller screen, no second screen, wonky Bluetooth and no camera.
AwesomeFabe said:
you have the latest twrp recovery? Just make sure you have 3.0 or higher and then try flashing again. And IMO the blissrom isnt worth using unless you dont mind smaller screen, no second screen, wonky Bluetooth and no camera.
Click to expand...
Click to collapse
Hey, I actually just fixed it. I finally was able to get back into download mode and I then used LG Bridge. Restoring now. Yeah, I actually picked it for some reason I cannot remember when I was faced with having to put in a custom rom as my option. I agree. When I had 5.1.1 everything worked after I got the bloatware out. Not going to get too fancy, I had a bit of a scare.
Currently, I'm using TWRP 3.2.1-0 and I managed to get it to flash a ROM only once so far. I've already done some searching on what this error means which apparently just says that it fails checking for the proper make/model of the device so that it won't flash something its not suppose to. Except, I have a ROM for the device...
When I first flashed, I had no choice but to do a factory reset which is really a given anyway. But now... its another story. Trying to flash a an updated LineageOS ROM for instance to the latest nightly for instance, will always result in an Error 7. I don't really want to do a factory reset again if I can help it though, even though I do have two points of backup just in case... Not sure if anyone else is having issues about this or not, but figured I'd point it out for now.
TwinShadow said:
Currently, I'm using TWRP 3.2.1-0 and I managed to get it to flash a ROM only once so far. I've already done some searching on what this error means which apparently just says that it fails checking for the proper make/model of the device so that it won't flash something its not suppose to. Except, I have a ROM for the device...
When I first flashed, I had no choice but to do a factory reset which is really a given anyway. But now... its another story. Trying to flash a an updated LineageOS ROM for instance to the latest nightly for instance, will always result in an Error 7. I don't really want to do a factory reset again if I can help it though, even though I do have two points of backup just in case... Not sure if anyone else is having issues about this or not, but figured I'd point it out for now.
Click to expand...
Click to collapse
Downgrade to twrp 3.1.1-0 and try again...
No dice. Actually this was the second time I tried doing it like that. Doesn't matter which recovery I use be it 3.1.1, or 3.2.1. Both results in the same error regardless. Its like TWRP downgraded after it hit v3 because never once had I ever encountered a problem when I used it back on 2.8.7 (or 2.8.6, I can't recall back when Moto X (ghost) was my main device).
TwinShadow said:
No dice. Actually this was the second time I tried doing it like that. Doesn't matter which recovery I use be it 3.1.1, or 3.2.1. Both results in the same error regardless. Its like TWRP downgraded after it hit v3 because never once had I ever encountered a problem when I used it back on 2.8.7 (or 2.8.6, I can't recall back when Moto X (ghost) was my main device).
Click to expand...
Click to collapse
What is your exact model - what's written on the box and what is the model shown in Settings on your stock firmware (if you remember).
I have a sneaking suspicion that it may not be the exactly same device as ours - E5823, creating a conflict somewhere between Firmware/Recovery. Generally, it should get the device data from prop files but you never know I guess...
Here is what you can try: Install latest firmware for E5823 from XperiFirm in Flashtool and wipe everything. If you don't wipe old files are still going to stay! Also, make a backup of all your stuff so you don't lose it. There are guides how to do it here and what things to not wipe in any case.
The device model is indeed a E5823. This has been reported as such in the official firmware as well.
Currently I don't have any of the official firmware files, and I would like to avoid having to set up my phone again if I can help it; even with a nandroid of my current install handy... Its simply just a pain to get all that done.
The last 2 nightlys don't work properly!! I have clean installed, wiped everything and gone back to stock and tried and tried again and again!! 20180318 is the one that is true!! Try flashing that build!!
TwinShadow said:
The device model is indeed a E5823. This has been reported as such in the official firmware as well.
Currently I don't have any of the official firmware files, and I would like to avoid having to set up my phone again if I can help it; even with a nandroid of my current install handy... Its simply just a pain to get all that done.
Click to expand...
Click to collapse
The thing is some partitions get updated only in that way - like baseband for example. Ensuring everything is the latest version and on a clean slate will remove the chance of weird bugs that nobody knows about or can help you with.
Well, here's the irony. I reflashed your TWRP again, twice for that matter.. (I've had random cases where fastboot won't flash it the first time even though it said it did) and all of a sudden it started working. Android never ceases to amaze me when things want to work, and when things don't...
TwinShadow said:
Well, here's the irony. I reflashed your TWRP again, twice for that matter.. (I've had random cases where fastboot won't flash it the first time even though it said it did) and all of a sudden it started working. Android never ceases to amaze me when things want to work, and when things don't...
Click to expand...
Click to collapse
Lol. I have never had that :d and that is from years and years of use and multiple Sony devices...
My guess is a bad flash. That happens rly rarely but maybe u have a bad PC or cable that makes an unreliable connection...
Same thing happened on my old Moto X (2013) on my last system and the new tower I built. For some reason its something to do with fastboot for me, I really don't know. Either that, or its just Windows trying to fight me every which way it possibly can before something wants to work. Its a daily thing I have to deal with, no idea why. Must be my disdain for Windows perhaps..
TwinShadow said:
Same thing happened on my old Moto X (2013) on my last system and the new tower I built. For some reason its something to do with fastboot for me, I really don't know. Either that, or its just Windows trying to fight me every which way it possibly can before something wants to work. Its a daily thing I have to deal with, no idea why. Must be my disdain for Windows perhaps..
Click to expand...
Click to collapse
You might wanna ensure you have the latest fastboot drivers installed under 'Disable driver verification' mode.