FIRST: Thanks to jose.guillen1302 (User of HTCManía)
==========================
English version:
==========================
*NOTE* Im uruguayan, and my english its TOO BAD but better than google translator.
Yesterday, i updated my phone, with LGUpdateTool and blah blah blah, with kdz from lg-firmware-rom.com and more blah blah blah
Some hours after the update, i tried to re-flash to downgrade, because the last build its unrooteable with towelroot v1 (freezes)
The problem was: No download mode. (It continues normally)
*reaction* :crying: :crying: :crying: :crying:
At 03:00am i found the solution! (Another time thanks to user of htcmania)
1. Enable Usb Debugging
2. Install adb+fastboot app & driver (i used the installer of the user @Snoop05 /showthread.php?t=2588979)
3. Open a cmd, connect the phone, and do adb restart bootloader
4. The phone will restart and stay on a black screen.
5. Now go to Device Manager and search the unknown device: fastboot
6. Right click > Update driver manually > Search on pc > see full list
7. Search Google, Inc. in the list and install HTC Bootloader, overriding windows message.
8. Now close the device manager, disconnect phone from usb, remove the battery
9. Turn it on, with vol + and THAT'S IT! Now download mode works magically.
Hope it helps.
Source: HTCMania thread - Message #18
==========================
Spanish version / Versión en español:
==========================
*NOTA* Si alguien sabe inglés perfectamente, agradecería enormemente que me corrigiesen.
Ayer, actualicé mi teléfono, con LGUpdateTool y bla bla bla, con el kdz de lg-firmware-rom y mas bla bla bla...
Unas horas despues, intenté re-flashear para hacer downgrade, porque la ultima build no es rooteable con towelroot v1 (se tilda)
El problema era: No tenía modo Download (No podía flashear.)
*mi reacción* :crying: :crying: :crying: :crying:
A eso de las 03:00am encontré la solucion (Otra vez gracias al usuario de HTCManía)
1. Activar modo Depuración Usb
2. Instalar adb+fastboot, la aplicación y el driver. (usé el instalador del usuario @Snoop05 /showthread.php?t=2588979)
3. Abrir una consola (cmd), conectar el teléfono, y hacer: adb restart bootloader
4. El telefono se reiniciará y se quedará en una pantalla negra
5. Ahora ve al administrador de dispositivos y busca el dispositivo desconocido: fastboot
6. Haz click derecho > Actualizar driver manualmente > Buscar en el equipo > ver lista completa
7. Busca " Google, Inc. " en la lista y de ella instala HTC Bootloader, sobrepasando el mensaje de advertencia de windows.
8. Cierra el administrador de dispositivos, desconecta el telefono del usb, remueve la batería
9. Enciendelo, con la tecla vol + y FUNCIONA! Modo download a la vida MAGICAMENTE (Bueno, no tan magicamente)
Espero que ayude.
Fuente: Hilo de HTCManía - Mensaje #18
This is for the D625, right?
Sent from my D620r [Stock 4.4.2]
Vagelis1608 said:
This is for the D625, right?
Sent from my D620r [Stock 4.4.2]
Click to expand...
Click to collapse
Yeah, i tested it on a D625, but i think may work on other g2 mini's who haves this problem.
Nice.
In case you dont manage to install as OP said, choose to instal ADB Interface, select google inc, then in the sub options youll find the htc bootloader.
Also confirming it worked.
Thanks.
Related
Hello friends a salute to this great community, I am writing to make a query Y200 acquired a Huawei Ascend (U8655-51) here in Venezuela the problem is that one of the bad features of this is that it has very little internal space I have this app installed because memory is full and it is saying it has little disk space now the question is how this team rooteo to put the linksd2 and to activate the partition and others in order to have more space there is a Statute for a site German but nothing does not work on my computer I have done several times and does not work in advance thanks for any help greetings hope one response
Tutorial
albertwesker17 said:
Hello friends a salute to this great community, I am writing to make a query Y200 acquired a Huawei Ascend (U8655-51) here in Venezuela the problem is that one of the bad features of this is that it has very little internal space I have this app installed because memory is full and it is saying it has little disk space now the question is how this team rooteo to put the linksd2 and to activate the partition and others in order to have more space there is a Statute for a site German but nothing does not work on my computer I have done several times and does not work in advance thanks for any help greetings hope one response
Click to expand...
Click to collapse
Hi, Albert, I think you are the one who did this tutorial. THANKS :highfive: . It worked for me; XDA is the most known comunity so I think you should post it here too...
Mensaje original:
"(…) Download the application "Y200ToolBox".
Then, configure the device
> Settings -> Applications -> Quick Restart (uncheck)
> Settings -> Applications -> Development -> USB debugging (enable)
Adb drivers installed connect the device and given the option to finish installing the phone disconnected).
Turn off the device, remove the battery a few seconds then put back. Get the device in Fastboot with the combination of the [Volume-/ Power] during 15sec until it stay stuck in the logo
Connect the device to the PC and run the software
Select the Root + CMW
It takes a few seconds to work, do not touch anything.
It takes a while because the software will be doing some work, but it tells you when the process is finished completely and boot.
And you'll be already root users”
It work perfect for me for rooting, CMW I’m still trying, and when I get it I’ll post it. I hope it will work for everybody.
All credits to the friends in MyHuawei.net for the creation of the tool”
“Root Huawei Y200 Modelo U8655-51
Para los que no han podido ser Root en este modelo con otros métodos (no discrimino ni digo que no funcionan solo es otra alternativa)
Descargamos la aplicación Y200ToolBox al final dejo el link
Luego configuran el dispositivo
Configuración -> Aplicaciones -> Reinicio rápido (desmarcar)
Configuración -> Aplicaciones -> Desarrollo -> Depuración USB (activar)
Instalan los drivers adb, conectan el dispositivo y les dará la opción de instalarlos al terminar desconectan el teléfono
Apagan el dispositivo sacan la batería unos segundos luego la colocan de nuevo encienden el dispositivo en Fastboot con la combinación de las teclas [Volumen- / Poder] durante 15seg se quedara estancado en el logo
Conectan el dispositivo a la PC y ejecutan el software
Selecciona la opción Root + CMW
Dejan que trabaje se tardara unos segundos NO TOQUEN NADA
Lo dejan un rato ya que el soft. Estará haciendo unas tareas más el avisara cuando todo el proceso haya terminado completamente se apagara y encenderá nuevamente
Y listo ya serán usuarios Root"
A mí me funciono perfectamente para el Root, aunque el CMW todavía no me funciona. Si lo consigo lo pongo bueno espero que les sirva a los que tienen este equipo que a mi parecer es muy bueno
Todos los créditos por la creación de la herramienta a los amigos de MyHuawei.Net”
Click to expand...
Click to collapse
IMPORTANT/IMPORTANTE:
When I used the tool it didn’t work, so I navigated to the install directory Programs Files/MyHuawei.Net and I found a BAT file: “root.bat” that I ran and did the job, it took like 5 minutes. Follow the steps in the Albert tutorial, and run “root.bat” instead of the “Y200ToolBox.exe” if this happens to you. Wait a while, then the phone will boot unrooted, wait a little more and it will boot again by itself and do the Root. :victory:
The error message was like: It’s not a win32 valid application.
Cuando usé la herramienta no funcionó, así que abrí el directorio de instalación Archivos de Programa/MyHuawei.Net y encontré un archivo BAT: “root.bat”, que corrí e hizo el trabajo, tomó como 5 min. Sigan las instrucciones de Albert en su tutorial y corran “root.bat” en vez de “Y200Toolbox.exe” si les ocurre. Esperen un poco, el teléfono se reiniciará sin privilegios Root y luego se reiniciará de nuevo y finalizará el rooteado.
El mensaje de mi error fue algo como No es una aplicación win32 valida.
XDA doen't let me post the link. Search "Y200ToolBox" in google.
XDA no me deja postear el link. Busquen "Y200ToolBox" en google.
tutorial made by albertwesker at Htcmania
tutorial hecho por albertwesker en Htcmania
I discovered the solution to the error by myself, any questions please ask.
La solución a el error de la aplicación lo descubrí por mi cuenta, cualquier cosa pregúntenme.
thanks
it achieves exactly is mine and quice compratir as I did for this team they have not remembered thanks for bringing xda but I had no problem but brought greetings friend
l7wahn said:
IMPORTANT/IMPORTANTE:
When I used the tool it didn’t work, so I navigated to the install directory Programs Files/MyHuawei.Net and I found a BAT file: “root.bat” that I ran and did the job, it took like 5 minutes. Follow the steps in the Albert tutorial, and run “root.bat” instead of the “Y200ToolBox.exe” if this happens to you. Wait a while, then the phone will boot unrooted, wait a little more and it will boot again by itself and do the Root. :victory:
The error message was like: It’s not a win32 valid application.
Click to expand...
Click to collapse
i follow the instruction.
> usb debug
> uncheck fast boot
> successfully install and connect adb driver
> Turning off the device, remove the battery a few seconds then put back. Get the device in Fastboot with the combination of the [Volume-/ Power] during 15sec until it stay stuck in the logo
Connect the device to the PC and run the software
here, i follow your instruction in running "root.bat" in the myhuawei.net because i found "It’s not a win32 valid application."
after that it ran the bat file, about 1 minute my pc restarted
> i wait until it works again but it doesn't.
> there's windows error message
where and what are my mistakes?
thanks
Answers
bakuradits said:
i follow the instruction.
> usb debug
> uncheck fast boot
> successfully install and connect adb driver
> Turning off the device, remove the battery a few seconds then put back. Get the device in Fastboot with the combination of the [Volume-/ Power] during 15sec until it stay stuck in the logo
Connect the device to the PC and run the software
here, i follow your instruction in running "root.bat" in the myhuawei.net because i found "It’s not a win32 valid application."
after that it ran the bat file, about 1 minute my pc restarted
> i wait until it works again but it doesn't.
> there's windows error message
where and what are my mistakes?
thanks
Click to expand...
Click to collapse
Why did your pc restarted? or do you mean your Device?
This is what the root.bat do:
first it erase the recovery image and flash an image with cwm (step that will make your device to not get into the recovery any more... There's a solution)
second it flash the y200recovery.img that is in the y200toolbox directory
third it boots
then when the device boots into the android software and you see the loader, or the lock (depending on your configuration) it will run a shell in adb that will get the superuser.apk in the /system directory. If you're using an Huawei u8655-51, there will be not a chance to damage anything if your pacient.
last it sends the adb reboot command to the phone and the phone boots rooted.
Know, make all things again, but wait until the command promt shuts itself.
Alfredohs esto es para ti:
si dañaste el proceso de inicio es porque tal vez usaste otro ".bat" en el directorio. Esto va a dañar el boot.img de tu teléfono, debes usar el stockkernel.bat en modo fastbot para restaurarlo.
If you damaged the booting process in the phone it might be because you used another ".bat" in the directory. Which will change the boot.img so you should use the stockkernel.bat whit the device in fastboot mode to restore it.
Hi... I have used "Y200ToolBox" to root my phone, but it seems something went wrong. I tried to do it again, but while I restart the phone it restarts to CWM recovery. I don't know when this happened. So I think I disconnected the phone before the rest of the process completed the first time I tried, I mean the rooting part... Can you help me to solve this?
--------------------------------------------------------------------
Hola, he usado "Y200ToolBox" para rootear mi fone, pero parece que algo salió mal. Intenté hacerlo de nuevo, pero mientras reinicio el fone este se va al CWM recovery. No sé cuando pasó, así que pienso que lo desconecté antes de que cumpliera el resto del proceso la primera vez que lo hice, me refiero a la parte del rooting... Me podrían ayudar a resolver esto?
Huawei ascend y200 FM apk required
Hi
I rooted my Huawei ascend y200 and accidentally removed the FM application. If you have the apk please share it
Good. My cellular one had remained plaster in the logo of beginning and due to this unload the Rom Stock/Firmware and the folder dload copy it in the Card SD. Press Power, Vol + and Vol - and it began the installation. On having initiated to the telephone he asked me " Update of Software " on having disburdened I skip the option to install and restart the equipment. Restart it and it went away to the terminus emui. But 5 hours happened and the cel followed in 0 % so I decided to take the battery from him and to do the same procedure of the update.app For my surprise on having made it immediately was jumping the mistake. " Software Install failed " And eh here where I come to you, does it design someone of since this solves?
-----------------------------------------------------------------------
Buenas. mi celular se había quedado pegado en el logo de inicio y debido a esto le descargue la Rom Stock/Firmware y la carpeta dload la copie en la Tarjeta SD.
Presione Power, Vol+ y Vol- y comenzó la instalación.
Al iniciar al teléfono me pidio "Actualización de Software" al descargarse me salto la opción de instalar y reiniciar el equipo.
Lo reinicie y se fue a la terminal emui. Pero pasaron 5 horas y el cel seguia en 0% así que decidí quitarle la bateria y hacer el mismo procedimiento del update.app
Para mi sorpresa al hacerlo inmediatamente me saltaba el error. "Software Install failed"
Y eh aqui donde acudo a ustedes, alguna idea de como solucionar esto?
miren... resulta que mi defy entra en bootloader... si... pero RSD lite no me lo reconoce .. probe de TODO....
desde:
-Cargarlo al 100% con un cargador universal (porque se quedo sin sistema creo... porque no carga normalmente)
-Hacerles WIPES desde el POWER y volumen - (todo tipo)
-intentar abrir TWRP .. ( se apaga instantaneamente ... como si no tuviera carga)
-iniciarlo normalmente.. ( no funciona porque se apaga... creo que se quedo sin sistema porque con cargador normal no carga)
-abrir el segundo arranque (pasa lo mismo que con el TWRP .... se apaga!)
Dato importante:
-Habia instalado android 4.4.4 pero... se habia ***** por haberlo ruteado.. debido a esto intente flashearlo.. cuando me devolvieron mi PC (estaba en arreglo) se quedo sin carga ( tuve que comprar cargador universal) y luego de cargarlo al 100% puse bootloader... intale RSD lite.. (probe muchas verciones) luego los drivers de motorola (probe muchas verciones.. incluso de la pagina original ) .. asique aclaro.. el bootloader anda... el telefono anda normalmente.. pero se quedo sin sistema.. cuando lo conecto a PC hacer ruido pero el RSD lite no lo reconoce (solo el PC)
-tengo una rom lista.. pero si no me lo reconoce no puedo hacer nada ....<_<
EN FIN.... espero su respuesta ... confio en ustedes ... ! SALUDOS
Translation
Look ... it turns out that my defy goes into bootloader ... yes ... but RSD lite does not recognize it ... probe of EVERYTHING ....
since:
- Charge it to 100% with a universal charger (because it ran out of system I think ... because it does not load normally)
- Make them WIPES from the POWER and volume - (all type)
-try to open TWRP .. (shuts off instantly ... as if it had no load)
- start it normally .. (does not work because it goes off ... I think it ran out of system because with normal loader does not load)
-open the second boot (same as with the TWRP .... it goes off!)
Important fact:
-I had installed android 4.4.4 but ... had ***** for having routed it .. because of this I try to flash it .. when they returned my PC (I was in arrangement) I was without load (I had to buy universal charger ) And after loading it to 100% I put bootloader ... intale RSD lite .. (probe many verifications) then the drivers of motorola (probe many verifications .. even of the original page) .. soique claro .. the bootloader walks. .. the phone normally goes .. but it ran out of system .. when I connect it to PC make noise but the RSD lite does not recognize it (only the PC)
-I have a rom ready .. but if you do not recognize me I can not do anything .... <_ <
MartinTheGamer said:
miren... resulta que mi defy entra en bootloader... si... pero RSD lite no me lo reconoce .. probe de TODO....
desde:
-Cargarlo al 100% con un cargador universal (porque se quedo sin sistema creo... porque no carga normalmente)
-Hacerles WIPES desde el POWER y volumen - (todo tipo)
-intentar abrir TWRP .. ( se apaga instantaneamente ... como si no tuviera carga)
-iniciarlo normalmente.. ( no funciona porque se apaga... creo que se quedo sin sistema porque con cargador normal no carga)
-abrir el segundo arranque (pasa lo mismo que con el TWRP .... se apaga!)
Dato importante:
-Habia instalado android 4.4.4 pero... se habia ***** por haberlo ruteado.. debido a esto intente flashearlo.. cuando me devolvieron mi PC (estaba en arreglo) se quedo sin carga ( tuve que comprar cargador universal) y luego de cargarlo al 100% puse bootloader... intale RSD lite.. (probe muchas verciones) luego los drivers de motorola (probe muchas verciones.. incluso de la pagina original ) .. asique aclaro.. el bootloader anda... el telefono anda normalmente.. pero se quedo sin sistema.. cuando lo conecto a PC hacer ruido pero el RSD lite no lo reconoce (solo el PC)
-tengo una rom lista.. pero si no me lo reconoce no puedo hacer nada ....<_<
EN FIN.... espero su respuesta ... confio en ustedes ... ! SALUDOS
Translation
Look ... it turns out that my defy goes into bootloader ... yes ... but RSD lite does not recognize it ... probe of EVERYTHING ....
since:
- Charge it to 100% with a universal charger (because it ran out of system I think ... because it does not load normally)
- Make them WIPES from the POWER and volume - (all type)
-try to open TWRP .. (shuts off instantly ... as if it had no load)
- start it normally .. (does not work because it goes off ... I think it ran out of system because with normal loader does not load)
-open the second boot (same as with the TWRP .... it goes off!)
Important fact:
-I had installed android 4.4.4 but ... had ***** for having routed it .. because of this I try to flash it .. when they returned my PC (I was in arrangement) I was without load (I had to buy universal charger ) And after loading it to 100% I put bootloader ... intale RSD lite .. (probe many verifications) then the drivers of motorola (probe many verifications .. even of the original page) .. soique claro .. the bootloader walks. .. the phone normally goes .. but it ran out of system .. when I connect it to PC make noise but the RSD lite does not recognize it (only the PC)
-I have a rom ready .. but if you do not recognize me I can not do anything .... <_ <
Click to expand...
Click to collapse
Greetings, ALL posts on xda must be in English. I have translated this one for you but please use google translate for all future posts
Regards
Sawdoctor
This guide is for those spanish native speakers that do no understand the english language, please note that translators sometimes makes inaccurate translations and might cause misleads, causing confusion or a required CRITICAL step to not be followed properly. These inaccuracies with the fact non-English speakers might not understand everything as well as a native or fluent speaker, can lead to otherwise unwanted avoidable bricks.
POR MOTIVOS DE SEGURIDAD TU BOOTLOADER DEBE ESTAR DESBLOQUEADO, SI ESTA BLOQUEADO Y ALGO SALE MAL EN EL PROCESO NO PODRAS DESBRICKEARLO Y QUEDARA INSERVIBLE, NO ME HAGO RESPONSABLE POR INSTALACIONES FALLIDAS, BRICKEOS, ETC. SE RECOMIENDA ENCARECIDAMENTE HACER BACKUP DE TODAS TUS PARTICIONES CON TWRP (SOBRETODO DE LA PARTICIÓN EFS PARA RESTAURAR TU IMEI) ANTES DE COMENZAR.
Esta guía está basada en la guía de @HTCDevil, de hecho es una traducción al español de la misma pero con algunas modificaciones y otros detalles agregados, y en este caso la adapté para hacer posible la actualización de Stock 8 (Oreo) a Stock 9 (Pie).
Se ha comprobado que este método funciona con las siguientes variantes del Z2 Play:
XT1710-01, XT1710-02, XT1710-06, XT1710-07, XT1710-09 y XT1710-10 funcionan sin problemas, también funciona con el XT1710-08 y XT1710-11, pero con últimos dos hay que hacer unos ligeros ajustes en el script. He incluido todas las variantes posibles para estos casos.
Agradecimientos especiales a Junior Passos @Junior Passos , el dueño (OP) del post original de Moto Z Brasil.
NOTA: Esta guía está asumiendo que ya tienes instalado Stock 8 (Oreo) en tu Z2 Play, si tu teléfono se encuentra en la versión 7 (Nougat), puedes usarla de igual modo, pero debes fijarte que estés ejecutando el script que actualice a la versión correspondiente. Hay un script para cada modelo del Z2 Play.
Pasos a seguir:
1) Descarguen los drivers (links al final del post)
2) Instala los drivers (Windows) en este orden, primero instala los Drivers Universales ADB, luego instala los drivers de Motorola y reinicia la PC;
3) Descomprime el firmware, el ADB y los scripts todos juntos en la misma carpeta (agradecimientos a htcmania por el paquete);
4) Apaga tu teléfono y ponlo en modo fastboot (Volumen menos + Power), luego conéctalo a la computadora, espera la instalación de los drivers si es necesario;
5) Copia el script correspondiente a la carpeta raíz donde se encuentra el ejecutable adb.exe
6) Dependiendo de tu modelo y la versión de Android que vayas a actualizar, ejecuta el script que termina en .bat y sigue las instrucciones.
Listo.
Se recomienda uns instalación limpia, es decir actualizar + borrar datos de usuario.
Para simplificar las cosas hay 3 líneas omitidas que realmente no hacen falta y de hecho pueden causar problemas en las variantes chinas, estas son:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
Se sabe que el módem (NON-HLOS.bin) que viene con Stock Pie causa problemas de audio durante las llamadas cuando se está utilizando esta versión del módem en un Custom ROM, porque distorsiona el audio a tal grado que se hace imposible entenderlas, por eso esta línea debe omitirse a menos que estés en Nougat y quieras actualizar a Oreo, en cuyo caso sí debes incluir esta línea.
Necesitas una ROM Stock RETAIL, al final del post dejaré el link para que la descargues.
Si por casualidad tienes un boot.img corrompido y no puedes flashear (si tu teléfono es traído de banggood o de otras tiendas que proveen modelos chinos), tienes que introducir este comando:
Code:
fastboot flashing unlock
MAGISK (root) en OREO
Para instalar Magisk en Stock Oreo, pueden darle las gracias a Fabio Feher[/QUOTE]
Fabio Feher said:
Funcionó para mí:
1) Reinicia en modo bootloader (fastboot)
2) Flashea el TWRP con ADB (fastboot flash recovery nombre-del-recovery.img)
3) Entren en el Custom Recovery (TWRP)
4) Entren en ADVANCED > TERMINAL
5) Ejecuten los siguientes comandos en la terminal del teléfono:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
6) Flashear Magisk
7) Reinicien
Click to expand...
Click to collapse
MAGISK (root) en Pie
Para instalar Magisk en Stock Pie no hace falta seguir los pasos 4) y 5) ya que no son necesarios, solo flasheen el custom recovery y a partir de allí flashean el magisk con normalidad.
MAGISK SIGUE SIN FUNCIONAR EN LA STOCK ROM --- COMO ARREGLARLO ---
Si Magisk sigue sin funcionar intenta desinstalando otra vez y flashea la versión v19.3, luego actualiza desde la apk.
Agusti94 said:
MUY IMPORTANTE!!!!!!!!!!
Para instalar Magisk primero flashea la versión 19.x desde TWRP, luego actualiza a 20.x desde la aplicación, de lo contrario el teléfono seguirá reiniciándose en el logo.
Click to expand...
Click to collapse
Instalar Magisk en GSIs:
En algunas GSIs la versión normal de Magisk hace que el teléfono se quede pegado en el logo, por lo que hay que desinstalarlo e instalar una versión modificada específicamente para las variantes de GSI como AOSP y sus derivados, que por cierto tampoco podrás actualizar porque causará el mismo bootloop, pero sí puedes actualizar la apk del manager, si tu teléfono no pasa del logo después de flashear Magisk debes flashear el uninstaller que dejaré al final del post.
Moto Z logo
Después de desbloquear el bootloader, cuando enciendas tu teléfono verás que ya no aparece el logo del Moto Z sino que este es reemplazado con un texto diciendo lo que ya es obvio, para quitar ese texto feo puedes descargar este logo del Moto Z y lo flasheas con el siguente comando:
Code:
fastboot flash logo logoz.bin
A mí me funcionó, por lo que debería funcionarle a ustedes también. Espero que les sea de utilidad.
Links de descarga:
Universal ADB Drivers para Windows http://download.clockworkmod.com/test/UniversalAdbDriverSetup.msi
Motorola USB Drivers para Windows http://www.mediafire.com/file/akiha24e4z3sine/MotorolaDeviceManager_2.5.4.7z/file
Herramientas de ADB: https://www.mediafire.com/file/pgmkw9vj1qut4ba/platform-tools_r30.0.3-windows%28adb%29.7z/file
Actualización RETAIL ROM Stock Pie 9.0: https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Scripts https://www.mediafire.com/file/nwio62ttvch1vjd/scripts.7z/file
64-bit Treble TWRP (necesaria para flashear GSIs, Custom ROMs y hacer backup de todas tus particiones) https://androidfilehost.com/?fid=1322778262904007189
Magisk 20.4: https://www.mediafire.com/file/yh9jtc9rdqzmjeo/Magisk-v20.4.zip/file
Magisk de phhusson v19.3 (para GSIs) https://github.com/phhusson/treble_experimentations/releases/download/v200/magisk-phh.zip
Magisk de ExpressLuke v20.3 (para GSIs) https://sourceforge.net/projects/ex...sk-ten/Magisk-v20.3-15bd2da8-phh.zip/download
Magisk Uninstaller https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-uninstaller-20200323.zip
Modem de Stock Oreo http://www.mediafire.com/file/q8nbpybxc8mjyew/NON-HLOS-Z2P-STOCK-8-OREO.7z/file
Stock Moto Z logo http://www.mediafire.com/file/lpcmsgtm2vs603r/logoz.bin/file
Actualizar a Android 9 Pie con el método oficial (bootloader bloqueado) https://www.youtube.com/watch?v=n57v9r2jysw
Mirrors de todas las ROM del Z2 Play, si van a descargar Nougat u Oreo se recomienda descargar del canal RETLA si tu modelo es XT1710-06, también puedes descargar la versión del mismo canal de tu proveedor (si eres de Colombia por ejemplo tigco) https://mirrors.lolinet.com/firmware/moto/albus/official/
Aquí termina la guía para usuarios de Windows, ̶e̶n̶ ̶e̶l̶ ̶s̶i̶g̶u̶i̶e̶n̶t̶e̶ ̶c̶o̶m̶e̶n̶t̶a̶r̶i̶o̶ ̶a̶g̶r̶e̶g̶a̶r̶é̶ ̶l̶a̶ ̶g̶u̶í̶a̶ ̶p̶a̶r̶a̶ ̶i̶n̶s̶t̶a̶l̶a̶r̶l̶o̶ ̶e̶n̶ ̶L̶i̶n̶u̶x̶,̶ ̶j̶u̶n̶t̶o̶ ̶c̶o̶n̶ ̶t̶o̶d̶a̶ ̶l̶a̶ ̶l̶i̶s̶t̶a̶ ̶d̶e̶ ̶c̶o̶m̶a̶n̶d̶o̶s̶ ̶p̶a̶r̶a̶ ̶h̶a̶c̶e̶r̶ ̶l̶a̶ ̶i̶n̶s̶t̶a̶l̶a̶c̶i̶ó̶n̶ ̶m̶a̶n̶u̶a̶l̶ ̶d̶e̶p̶e̶n̶d̶i̶e̶n̶d̶o̶ ̶d̶e̶l̶ ̶m̶o̶d̶e̶l̶o̶.̶
Quizás la próxima guía que haga sea para actualizar a Pie 9.0 con el bootloader bloqueado, es decir con el método oficial OTA.
Guía original de @HTCDevil https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153
[GUIDE] [STOCK] How to update your Moto Z2 Play to Android 9.0 Pie (fastboot)
Due to the forum rules there must be posted an english version of the original thread. Any questions you have you can ask here or DM directly.
FOR SECURITY REASONS YOUR BOOTLOADER MUST BE UNLOCKED, IF ITS LOCKED AND SOMETHING GOES WRONG DURING THE PROCESS YOU MIGHT BE UNABLE TO UNBRICK IT RENDERING IT UNUSABLE, I AM NOT RESPONSIBLE FOR FAILED INSTALLATIONS, BRICKS, ETC. IT IS STRONGLY RECOMMENDED TO BACKUP ALL YOUR PHONE DATA (SPECIALLY NFS SO YOU CAN RESTORE YOUR IMEI IF YOU LOSE IT SOMEHOW) WITH TWRP BEFORE STARTING.
This guide is based on @HTCDevil's guide, which was originally meant to upgrade from Nougat to Oreo, so I adapted his guide so it also works to update from Oreo to Pie and also updated it with more relevant information that isn't available on the old outdated guides.
It has been tested and it works with the following models of the Z2 Play:
XT1710-01, XT1710-02, XT1710-06, XT1710-07, XT1710-09 and XT1710-10 works without issues with the general same commands, it also works with the XT1710-08 and XT1710-11, the former needs to remove the two modemst lines and with the latter it needs to remove also those two lines, plus the modem and fsg lines, so I included all possible cases for every model.
A special, big, superb thanks to Junior Passos @Junior Passos the op of the motozbrasil thread. <<<
NOTE: This guide focuses mainly on upgrading to Android Pie with adb fastboot, so I am already assuming you have Android 8 (Oreo) installed, if your phone is still in Android 7 (Nougat), you might as well do the official OTA update since at this time and date it is now available for all models of the Z2 Play worldwide.
Steps to follow:
1) Download Drivers and all required files (links at the end of this post);
2) Install the drivers (Windows) in this order, and install Universal ADB Drivers, then install the Motorola Drivers and reboot your PC;
3) Unzip the firmware, ADB and the scripts everything in a single folder (special thanks to htcmania for the package);
4) Turn off your phone and put it into fastboot mode (Volume down + Power), then connect it to your PC, wait for drivers to install if they haven't installed yet;
5) Copy the corresponding script to the root folder where it is located the executable adb.exe
6) Depending on the model of your Z2 Play, execute the corresponding script .bat and follow instructions.
Profit.
It is recommended to do a clean install, that is, do a full wipe before updating.
To simplify things there are 3 entirely omitted lines that aren't really needed and in fact in can cause problems in the chinese variants, these files are:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
It is known that the modem file (NON-HLOS.bin) that comes with Stock Pie causes audio issues during calls whenever a custom ROM is installed afterwards, because it distorts the audio to the point it becomes impossible to understand the call, so this file specifically should be skipped unless you are updating from Nougat to Oreo, in that case it should be flashed too. The modem file from Stock Oreo works flawlessly on all Stock and Custom ROMs, so stay with this one.
Also you will need a RETAIL Stock ROM, at the end of the post I will leave the link to get that and the modem.
If you have a corrupted boot.img and you are not able to flash (like bangood or other shops do with chinese model), you first have to give that:
Code:
fastboot flashing unlock
---STUCK ON LOGO AFTER INSTALLING MAGISK ON STOCK ROM --- HOW TO FIX IT
Sometimes when installing Magisk your phone may get stuck in bootloop forever, so here is one workaround to fix it, you can also flash uninstaller and try again with other version.
Agusti94 said:
VERY IMPORTANT!!!!!!!!!!
To install magisk flash first V19.x from twrp, then update to V20.x from the manager. otherwise the phone gets stucked in bootloop
Click to expand...
Click to collapse
About Magisk in Oreo, you could give a thanks to Fabio Feher:
Fabio Feher said:
It work for me:
1: Reboot into Bootloader
2: ADB Flash TWRP
3: Start Recovery (TWRP)
4: Enter in ADVANCED > TERMINAL
5: Run commands:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
6: Flash Magisk
7: Reboot.
Click to expand...
Click to collapse
To install Magisk in Pie follow the same steps above, except you don't have fo follow steps 4 and 5, just flash it and reboot.
MAGISK IN GSIs: To install Magisk in Custom GSIs, you need to flash this modded version of phhusson's Magisk, also you cannot update it, so you have to stuck with that version, you can update the manager apk, tho. If your phone gets stuck on logo or keeps in bootloop flash the uninstaller provided at the end ot this post.
Moto Z logo
After unlocking your bootloader, whenever you turn on your phone you will notice that the Stock Moto Z boot logo is gone and instead it shows some ugly text telling what is already obvious, so in order to get rid of that and replace the Void Warranty text you can flash this Stock Moto Z logo with this command:
Code:
fastboot flash logo logoz.bin
It worked for me, so it should work for you too.
Hope is useful.
LINKS/RESOURCES
Universal ADB Drivers for Windows http://download.clockworkmod.com/test/UniversalAdbDriverSetup.msi
Motorola USB Drivers for Windows http://www.mediafire.com/file/akiha24e4z3sine/MotorolaDeviceManager_2.5.4.7z/file
latest adb platform tools: https://www.mediafire.com/file/pgmkw9vj1qut4ba/platform-tools_r30.0.3-windows%28adb%29.7z/file
ROM Stock RETAIL Pie 9.0 Update: https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Scripts https://www.mediafire.com/file/nwio62ttvch1vjd/scripts.7z/file
64-bit Treble TWRP (needed to flash Treble-based GSIs and Custom ROMs and also needed for backup of your phone partitions) https://androidfilehost.com/?fid=1322778262904007189
Magisk 20.4: https://www.mediafire.com/file/yh9jtc9rdqzmjeo/Magisk-v20.4.zip/file
Phhusson's Magisk v19.3 (for GSIs) https://github.com/phhusson/treble_experimentations/releases/download/v200/magisk-phh.zip
ExpressLuke's Magisk v20.3 (for GSIs) https://sourceforge.net/projects/ex...sk-ten/Magisk-v20.3-15bd2da8-phh.zip/download
Magisk Uninstaller https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-uninstaller-20200323.zip
Stock Oreo Modem http://www.mediafire.com/file/q8nbpybxc8mjyew/NON-HLOS-Z2P-STOCK-8-OREO.7z/file
Stock Moto Z Logo http://www.mediafire.com/file/lpcmsgtm2vs603r/logoz.bin/file
Mirrors of all the ROMs of the Z2 Play, if you are going to download Nougat or Oreo it is recommended to choose the one that belongs to your update channel. https://mirrors.lolinet.com/firmware/moto/albus/official/
Update to Android 9 Pie with the official OTA method (locked bootloader) https://www.youtube.com/watch?v=n57v9r2jysw
Here ends the guide, for the Linux guide and the complete list of commands to manually flash the ROM you can check @HTCDevil's original guide: https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153
#3 Reservado también
#4 este también está reservado
Please make English tutorial
Que onda, ya tienes activadas las dos sims del motoroña z2 play??
B3NJ4$ said:
Que onda, ya tienes activadas las dos sims del motoroña z2 play??
Click to expand...
Click to collapse
Hola, mi moto Z2 Play no es Doble SIM, es Single SIM.
De paso se dañó y parece que ya no voy a participar más en este foro.
XT1710-06 Proximity sensor problem and light sensor disappeared
Lo desbloquee para instalar Android 10 pero al ver que la estabilidad era horrible quise volver a lo ROM stock y no me deja cerrar el bootloader y solo se queda ahí en modo seguro
Traducción/Translation
I unlocked it to install Android 10 but seeing that the stability was horrible I wanted to go back to the stock ROM and it won't let me close the bootloader and it only stays there in safe mode
Trivent said:
No puedo cerrar el bootloader de mí moto e6plus la variante de 2 GB de RAM
Lo desbloquee para instalar Android 10 pero al ver que la estabilidad era horrible quise volver a lo ROM stock y no me deja cerrar el bootloader y solo se queda ahí en modo seguro
Click to expand...
Click to collapse
English only on XDA
Google Translation
I cannot close the bootloader of my moto e6plus the variant of 2 GB of RAM
I unlocked it to install Android 10 but seeing that the stability was horrible I wanted to go back to the stock ROM and it won't let me close the bootloader and it only stays there in safe mode
Click to expand...
Click to collapse
Sent from my Moto E (4) using Tapatalk
Hasta ahora no hay una forma de volver a bloquearlo, de todas formas Android 10 gsi va bastante bien llevo meses utilizándolo y no tiene errores significativos
Traducción/Translation
So far there is no way to block it again, anyway Android 10 gsi is doing quite well I have been using it for months and it has no significant errors
Aun asi si encuentras la forma de hacerlo seria bueno que lo compartas
franco619 said:
Hasta ahora no hay una forma de volver a bloquearlo, de todas formas Android 10 gsi va bastante bien llevo meses utilizándolo y no tiene errores significativos
Click to expand...
Click to collapse
which rom do i use?
and how do i install it?
Yo hice lo mismo y el comando para abrirlo proviene de los pixel. Para cerrarlo usa ahora el comando de cerrar de los pixel. Me comentas si funcionó.
Traducción/Translation
I did the same and the command to open it comes from the pixels. To close it now use the pixel close command. Can you tell me if it worked?
Trivent said:
Lo desbloquee para instalar Android 10 pero al ver que la estabilidad era horrible quise volver a lo ROM stock y no me deja cerrar el bootloader y solo se queda ahí en modo seguro
Click to expand...
Click to collapse
on english:
1- install with lmsa the same version as when unlocking the bootloader
2- once installed go directly to the bootloader
3- in fastboot use the command "fastboot flashing lock"
4- format from recovery
5- it should be locked now
Note: in case your mobile does not update, do it from lmsa, but your data is going to be formatted, I recommend checking that before installing your things
Thank you for reading
on spanish:
1- instale con lmsa la misma versión que cuando desbloqueo el bootloader
2- una vez instalado vaya directamente al bootloader
3- en fastboot use el comando "fastboot flashing lock"
4- formatee desde el recovery
5- deberia estar bloqueado ahora
Nota: en caso de que su movil no actualice hagalo desde lmsa, pero sus datos se van a formatear, recomiendo revisar eso antes de instalar sus cosas
Gracias por leer
Trivent franco619 perezd4
Como puede ver, se agregó la traducción a sus publicaciones anteriores, pero este trabajo debe ser realizado por usted según lo dictado por las reglas del foro. ¡Te recomiendo encarecidamente que los leas y elimines cualquier duda que pueda existir con el equipo de moderación!
Traducción/Translation
As you can see, translation was added to your previous posts but this work must be done by you as dictated by the forum rules.
I strongly advise you to read them and remove any doubts that may exist with the moderation team!
@perezd4
Were you able to close the boot loader?
LichtEstarossx said:
on english:
1- install with lmsa the same version as when unlocking the bootloader
2- once installed go directly to the bootloader
3- in fastboot use the command "fastboot flashing lock"
4- format from recovery
5- it should be locked now
Note: in case your mobile does not update, do it from lmsa, but your data is going to be formatted, I recommend checking that before installing your things
Thank you for reading
on spanish:
1- instale con lmsa la misma versión que cuando desbloqueo el bootloader
2- una vez instalado vaya directamente al bootloader
3- en fastboot use el comando "fastboot flashing lock"
4- formatee desde el recovery
5- deberia estar bloqueado ahora
Nota: en caso de que su movil no actualice hagalo desde lmsa, pero sus datos se van a formatear, recomiendo revisar eso antes de instalar sus cosas
Gracias por leer
Click to expand...
Click to collapse
hey! so i'm trying to lock the bootloader and I want to know if this actually works, or if there's another method to do it, I tried the command but it says FAILED (unknown command).
I also tried fastboot oem unlock and fastboot flashing lock_critical but they don't work
Thanks