Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Introduction
This is the official N5100XXDNL5 KitKat v4.4.4 (Poland Version) from Samsung for GT-N5100
Click to expand...
Click to collapse
Features
Rooted
Busybox
Odexed
Knox Removed
Click to expand...
Click to collapse
Requirements
GT-N5100
PhilZ / TWRP recovery, I am using PhilZ recovery 6.48.4
Kitkat Bootloader (v1.0 only)
Click to expand...
Click to collapse
Installation
Backup your device, in case you wanted to revert back.
Wipe Data/Factory Reset in recovery.
Flash the ROM
Flash SD-Card-Fix.zip (Required on both v1.0 and v1.1 )
Reboot
Click to expand...
Click to collapse
Downloads
SD-Card-Permission-Fix
SD-Card-Fix.zip
v1.1
N5100XXDNL5_Stock_Rooted_Odexed_v1.1.zip
MD5: 422957c6b347a9766d382cedd75828e8
v1.0
N5100XXDNL5_Stock_Rooted_Odexed_v1.0.zip
MD5: 8F39868A16BEAA94B91E83C7C0925C12
Click to expand...
Click to collapse
Credits
I would like to Thank:
@Chainfire for providing us with SuperSU :good:
@JustArchi for providing us with Android Kitchen :good:
@Lord Boeffla and @ZaneZam for the Awesome Kernel supporting 4.4.4 KitKat :good:
@civato for GT-N51XX-MALI-Driver-KitKat-FIX :good:
XDA:DevDB Information
CleanROM-GT-N5100-KitKat, ROM for the Samsung Galaxy Note 8.0
Contributors
pvsgh
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: GT-N5100, Kitkat Bootloader (v1.0 only)
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-02-06
Created 2015-01-27
Last Updated 2015-02-09
Changelog
Changelog
v1.1
Added Boeffla Kernel v2.1
To configure the Kernel, you would need to download Boeffla-Config App V2 from @Lord Boeffla's website:
http://www.boeffla-kernel.de/
Added N51xx Mali Driver Fix
Click to expand...
Click to collapse
Reserved
Fixies and?
Hi, I wanna flash the update but firstly i wanna know if it possible, what this update include, it will fix something or not?
Thank you so much!
Thank you.
I will try.
Any improvements over 4.4.2?
please help me---how abt custom kernal and xposed support
please help me///how abt custom kernal and xposed support
i using zanezam boeffla kernel. its awesome .so want to make it work with that...is der any mali driver updates
princedevilin said:
please help me///how abt custom kernal and xposed support
i using zanezam boeffla kernel. its awesome .so want to make it work with that...is der any mali driver updates
Click to expand...
Click to collapse
Xposed works, just install it as a normal app.
I have been trying to get the kernel working but no luck yet. Probably we need an updated kernel for 4.4.4
Megamind08 said:
Any improvements over 4.4.2?
Click to expand...
Click to collapse
DiegoDallaBattista said:
Hi, I wanna flash the update but firstly i wanna know if it possible, what this update include, it will fix something or not?
Thank you so much!
Click to expand...
Click to collapse
There might be some performance improvements but no UI changes.
ok then i will wait till kernel is fixed..thanks again..will follow the post ..and keep it updated..
Battery life is worst even after removing all that bloatware. 25% in an hour,, while Civz flex note was droping only 15%. Nice update. I can se some improvements like (Gallery app is now more faster and icons are updated for some apps. And some changes in settings section). But Battery life disappointed me.
Megamind08 said:
Battery life is worst even after removing all that bloatware. 25% in an hour,, while Civz flex note was droping only 15%. Nice update. I can se some improvements like (Gallery app is now more faster and icons are updated for some apps. And some changes in settings section). But Battery life disappointed me.
Click to expand...
Click to collapse
Please remember this is stock ROM with just root added. Battery life depends a lot on kernel, I haven't been able to get working Civz kernel on this yet.
i heard mali driver is updated
that may be the reason for the kernel issues.. im not an expert..
Anyone else can tell something about battery life? Will the Rom boot with the old Jelly Bean bootloader? Thanks
princedevilin said:
that may be the reason for the kernel issues.. im not an expert..
Click to expand...
Click to collapse
Yea, i read somewhere in civato's thread updating the mali driver make the device boot correctly.
gabripranzo said:
Anyone else can tell something about battery life? Will the Rom boot with the old Jelly Bean bootloader? Thanks
Click to expand...
Click to collapse
I'm using it since yesterday and it works great.
Battery life is correct for me. But I have to test it a coupple of days.
Greatins
Mr.201 said:
Yea, i read somewhere in civato's thread updating the mali driver make the device boot correctly.
Click to expand...
Click to collapse
Civato's "GT-N51XX-MALI-Driver-KitKat-FIX" only work for 4.4.2
Another thing I noticed that keyboard predictive text is not working.
Megamind08 said:
Another thing I noticed that keyboard predictive text is not working.
Click to expand...
Click to collapse
No changes made for Keyboard, did you check the setting for keyboard? You might need to enable certain setting based on your requirement.
I personally uses Swype keyboard.
pvsgh said:
Please remember this is stock ROM with just root added. Battery life depends a lot on kernel, I haven't been able to get working Civz kernel on this yet.
Click to expand...
Click to collapse
Boeffla kernel for 4.4.4 has just been released
Related
Miui India Proudly presents
Miui V5 Based on CM 10.1.3 (4.2.2 JDQ39E) for samsung galaxy S2 i9100
if you like my work please send a donation to show your appreciation, and in return I will give more effort to make this ROM great or please click thanks
Click to expand...
Click to collapse
Full MIUI Stock
Improve perfomance
Xperia Keyboard Added
Init.D Support & Tweaks
Zipalign
CPU TweaKs
Net Speed Tweaks
System tweaks
Build.Prop Tweaks
New Ram Managements
Battry Tweaks
New Deep Sleep Data Method (Improves Battry and Reduce Ram Usage)
Display Sharpness tweaks
Improve Sounds and Audio Quality
Dalvik VM tweaks
Rooted with Permission manager
Gapps included
DownLoad
Full ROM V 4.3.7
CLICK ME
Installation Instructions:
Format Data/Factory Reset
Format Cache
Format DalvikCache
Install Rom Zip
Reboot...
Click to expand...
Click to collapse
XDA:DevDB Information
MIUI V5, a ROM for the Samsung Galaxy S II
Contributors
Javajohn, Miui India team
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.0.x
ROM Firmware Required: must be rooted and on custom recovery
Based On: CyanogenMod 10.1.3
Version Information
Status: Stable
Current Stable Version: 4.3.14
Stable Release Date: 2014-03-13
Created 2014-02-27
Last Updated 2014-03-13
Reserved
OTA UPDATES
OTA 4.3.7_TO_4.3.14
Does it support all languages?
holigan360 said:
Does it support all languages?
Click to expand...
Click to collapse
no
its first release so will add multilanguage support in next update
Screenshots?
Sent from my GT-I9100 using xda app-developers app
Good to see this from India proud
Yo! buddy, trying ur rom tonight. hope it works out well.
Hey, downloading the rom now looks promising.
One question, im updating my girlfriends phone and coming from android 2.5 - is it safe for me to flash this rom straight or do i need to worry about bootloader and such ?
tnx for work.
i want stock sammy mms or aosp mms for this rom.
can u help me?
Ingvaroo said:
Hey, downloading the rom now looks promising.
One question, im updating my girlfriends phone and coming from android 2.5 - is it safe for me to flash this rom straight or do i need to worry about bootloader and such ?
Click to expand...
Click to collapse
U can flash without worry..
And there is no android 2.5
any user comments about version ?
Only a curiosity, there is the same possibility to have android 4.3 or 4.4 instead of 4.2?
jack928 said:
Only a curiosity, there is the same possibility to have android 4.3 or 4.4 instead of 4.2?
Click to expand...
Click to collapse
yes its possible but fir MIcode have to support this builds
right now micodes are on support till 4.2.2
and in soon it will be updated as new miui v6 will be release may be in a month
Still no Screenshots?
Sent from my GT-I9100 using xda app-developers app
Code SyGma said:
Still no Screenshots?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
screenshorts are already uploaded
just click on screen shorts on top of thread
your 4.2.28 multilang version is work in progress?
I'm italian and when you release it , i'm going to test it
Wow! nice to see MIUI India in action. Dlding it right away and will post my experience.
coolpepe said:
Wow! nice to see MIUI India in action. Dlding it right away and will post my experience.
Click to expand...
Click to collapse
waiting for your comments
doctor_droid said:
U can flash without worry..
And there is no android 2.5
Click to expand...
Click to collapse
I ment 2.3.5 - Thanks for the help!
I tested the other Miui (v5) and the reason that i went back to slimrom is the fact that notifications (for example whatsapp) werent draggable to expand them.
Is that 'problem' resolved in this rom?
Disclaimer
Code:
/*
* Your warranty is void if you flash this ROM.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications solely on your own, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I've compiled this ROM for myself because I use Xposed and I like CyanogenMod.
I'm using it as a secondary ROM via MultiROM mod by @Skin1980 http://forum.xda-developers.com/lg-g3/development/mod-multirom-t2995047 . The ROM is bumped and at least one user using it says it works as only ROM (no dual Boot recovery).
There is a high possibility I'll continue to update the ROM, probably on a weekly basis, if there are updates from CyanogenMod team and while Xposed on CM12 is still immature.
Thank you for source code @invisiblek (https://github.com/invisiblek)
Thank you for guide on building @Raum1807 (http://forum.xda-developers.com/nexus-4/general/guide-cm11-how-to-build-cyanogenmod-11-t2515305
)
Thank you for original manifest @Skin1980 (https://github.com/Skin1980/local_manifests)
Thank you for directions on compilation errors @Ferindel
Kernel and ROM sources are pulled from git://github.com/CyanogenMod/ , there are no modifications of the source code by myself, only a single bug fix.
Downloads are in the 2nd post.
Bugs
screen sometimes doesn't wake up during calls
fixed since 20150224 build
Stagefright vulnerability
fixed since 20150812 build
you tell me (provide a logcat)...
XDA:DevDB Information
CyanogenMod 11 - Unofficial CM11 LG G3, ROM for the LG G3
Contributors
Galaid, invisiblek, Ferindel
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2015-02-10
Last Updated 2015-08-17
Reserved
Downloads here (visible in 2015 Theme):
http://forum.xda-developers.com/devdb/project/?id=8177&styleid=21#downloads
Changelog:
20150812
- Stagefright vulnerability fixed
20150629
- official and final CM commits (http://www.cyanogenmod.org/blog/releases-11-12-final)
20150505
- official CM commits (http://www.cmxlog.com/11/vs980/)
20150324 (stable release)
- official CM commits (http://www.cmxlog.com/11/vs980/)
20150305
- oversharpening fix integrated (no sharpening)
- raised volume levels (commit: https://github.com/CyanogenMod/andr...mmit/c7285d4e42b130746fb1dacca5d9d713847aa6fb)
- changed default dpi to 540
- official CM commits (http://www.cmxlog.com/11/vs980/) up to cm-11-20150302-NIGHTLY-vs980.zip + 3 newer.
20150224
- "Proximity not waking the phone during call" bug fixed in 20150224 release.
Krhmm, Where download ?
Eagle-no1 said:
Krhmm, Where download ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/devdb/project/?id=8177&styleid=21#downloads
Visible in 2015 xda Theme
Galaid said:
http://forum.xda-developers.com/devdb/project/?id=8177&styleid=21#downloads
Visible in 2015 xda Theme
Click to expand...
Click to collapse
Thanks, i use 2013 theme.
so we get again support for kitkat? awesome!!! thnx
is it similar to cm11s?
I mean is it stable and has lots of themes and customization and great camera ( stock kitkat camera is superb )!
Thanks dude, will test it now!
Thank god that someone will keep this awesome ROM alive!
Cannot boot up. I believe the kernel is not bumped.
Edit: back to work.. I bumped the boot.img
keaheng said:
Cannot boot up. I believe the kernel is not bumped.
Edit: back to work.. I bumped the boot.img
Click to expand...
Click to collapse
You're right, I didn't bother bumping as I'm running it as a secondary ROM on my device. Will test bumped ROM in multirom...
Galaid said:
You're right, I didn't bother bumping as I'm running it as a secondary ROM on my device. Will test bumped ROM in multirom...
Click to expand...
Click to collapse
May you please upload a bumped version?
johnpat said:
May you please upload a bumped version?
Click to expand...
Click to collapse
I'm uploading BUMPed version, will be in the Downloads tab in 10mins or so. Please note that I flashed this zip for test as a secondary ROM in my MultiROM environment so flash at your RISK. I used open_bump.py so I guess it would work.
Edit: bumped version is up. Please tell me how it went
baf8385a10f51de6d99ba68a56b9155d cm-11-20150203-UNOFFICIAL-d855-BUMPED-galaid.zip
emerald123 said:
I mean is it stable and has lots of themes and customization and great camera ( stock kitkat camera is superb )!
Click to expand...
Click to collapse
I use it as my daily ROM after using stock 4.4 for 3 months. For me it's not less stable than stock. This is pure CM ROM ported to D855 as CM team never released official CM11 for LG G3 International.
Galaid said:
I use it as my daily ROM after using stock 4.4 for 3 months. For me it's not less stable than stock. This is pure CM ROM ported to D855 as CM team never released official CM11 for LG G3 International.
Click to expand...
Click to collapse
Any bug discovered ATM?
Sent from my Nexus 10 using XDA Free mobile app
I've been using the rom as primary one (after bumping boot.img) and so far so good.
Excelent smoothness, no bugs so far, themes working fine.
Thanks.
Galaid said:
I use it as my daily ROM after using stock 4.4 for 3 months. For me it's not less stable than stock. This is pure CM ROM ported to D855 as CM team never released official CM11 for LG G3 International.
Click to expand...
Click to collapse
DPI are too high, bit i can downscale it. But, please, oversharpening kills me.
This ROM is fantastic but.. Oversharpening annoying.
bumped cm11 stable rom
Can somebody share me the bumped kitkat rom download link which will install fine with twrp?
I am on CLOUDY kitkat rom right now...
emerald123 said:
Can somebody share me the bumped kitkat rom download link which will install fine with twrp?
I am on CLOUDY kitkat rom right now...
Click to expand...
Click to collapse
2nd post contains ROM that I'm using and been installing it via TWRP (multirom variant)
Galaid said:
I use it as my daily ROM after using stock 4.4 for 3 months. For me it's not less stable than stock. This is pure CM ROM ported to D855 as CM team never released official CM11 for LG G3 International.
Click to expand...
Click to collapse
The microphone on Whatsapp is horrible.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research if
* you have any concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
IMP Node: As mentioned by Kiran Anto here this kernel has latest camera driver which is not suitable for Stock OS. So be carefull, if you are on Stock ROM.
Please don't just leech the files and go away. You can easily say thanks just by pressing "Thanks" button.
Download:
boot.img - 6.07 MB
boot.img - 6.07 MB Kernel with added Conservative Governor. Tested only with Carbon ROM on Yureka.
How to update:
Download above boot.img file.
Go to downloaded file location.
Then flash your kernel (boot.img) using following command.
Code:
sudo fastboot -i 0x1ebf flash boot boot.img
If unable to flash then make sure bootloder of your yureka is unlocked.
Note: Build with latest commits from https://github.com/CyanogenMod/android_kernel_yu_msm8916
Created 2015-02-14
Last Build 2015-02-14
:good::good:
Is this kernel compatible to flash with stock cyanogen? or need unofficial cm build? pls confirm
spikywits said:
Is this kernel compatible to flash with stock cyanogen? or need unofficial cm build? pls confirm
Click to expand...
Click to collapse
I have not tested on Stock OS. Working fine with CM build http://forum.xda-developers.com/yureka/development/cm-11-0-cyanogenmod-rom-t3021713
I need any tester to test it on Stock OS.
Since Stock OS has kernel source forked from cyanogenmod kernel source,
i think it will work on stock OS too.
Do remember currently stock branch is 10 commits behind CyanogenMod:cm-11.0 as far as android_kernel_yu_msm8916 is concerned.
Camera is not supported in this kernel... Please rectify it....
Kiran Anto said:
Camera is not supported in this kernel... Please rectify it....
Click to expand...
Click to collapse
Camera working fine in CM build ROM. Tested front and back camera with and without flash.
Even in low light good snap.
Which ROM you in, is it stock rom.
I'm using stock cm11... With update.. I tried launching cyanogen camera.. Then Google can... Then retrica.. None of them worked...
Kiran Anto said:
I'm using stock cm11... With update.. I tried launching cyanogen camera.. Then Google can... Then retrica.. None of them worked...
Click to expand...
Click to collapse
flash the stock kernel and check.
current cyanogenmod kernel has latest commits for camera, which is not incorporated in stock rom.
May be next build of stock ROM will solve it.
In stock its working fine....... I think its because they removed drivers.....dunno... Not suitable for stock ROM anyways...
Kiran Anto said:
In stock its working fine....... I think its because they removed drivers.....dunno... Not suitable for stock ROM anyways...
Click to expand...
Click to collapse
yes... they have removed the old driver & added new one. That may be the reason.
Camera not working in the stock rom... Will flash it with your CM build and update in this thread..
Update:- The kernel is working fine with your CM build and there isn't any fc in the camera app.
And in the stock rom I was experiencing random reboots every now and then but in your build the random reboots are too less..
snoopnoob said:
Camera not working in the stock rom... Will flash it with your CM build and update in this thread..
Update:- The kernel is working fine with your CM build and there isn't any fc in the camera app.
And in the stock rom I was experiencing random reboots every now and then but in your build the random reboots are too less..
Click to expand...
Click to collapse
@Kiran Anto @snoopnoob @dumtara
Obviously camera wont work if you flash this kernel on stock CM11 cause @dumtara uses latest kernel commits with support for IMX214 sensor and IMX135 sensor support is removed and stock shipping cm11 uses old old commits ie old camera libs IMX135
Here is the diff : STOCK - Latest
@dumtara THE FIX for camera - just make a flashable camera patch with all these new libs and camera should be working
https://github.com/TheMuppets/proprietary_vendor_yu/commit/d1dc059107040c97b0432bd41c7b6277a41516e9
https://github.com/TheMuppets/proprietary_vendor_yu/commit/718897ef84996ed4a4d883130115a8c6d40bbb82
https://github.com/TheMuppets/proprietary_vendor_yu/commit/4223efae51c3e80dff5b12481c6715eb4566083e
Deleted
Thanx
can you please make a flashable zip for the lib files.. so that i can use your kernel in my stock rom...
Kiran Anto said:
can you please make a flashable zip for the lib files.. so that i can use your kernel in my stock rom...
Click to expand...
Click to collapse
I will try.... need some time as i am working on carbon rom right now.
dumtara said:
I will try.... need some time as i am working on carbon rom right now.
Click to expand...
Click to collapse
your working on carbon rom ??
cheers dude carbon rom is one of the best roms atleast for me .
thanks dude .
keep it up bro .
freakzapster said:
your working on carbon rom ??
cheers dude carbon rom is one of the best roms atleast for me .
thanks dude .
keep it up bro .
Click to expand...
Click to collapse
published now here http://forum.xda-developers.com/yureka/orig-development/carbon-kk-unofficial-20150215-t3031245
Test it & post review.
Dude please modify this kernel to work on the stock rom if possible . Give us a flashable zip
Nishchay1 said:
Dude please modify this kernel to work on the stock rom if possible . Give us a flashable zip
Click to expand...
Click to collapse
done. making a thread. will update time to time.
Sudeep Duhoon said:
done. making a thread. will update time to time.
Click to expand...
Click to collapse
The thread is going live NOW ??!
Here is a kernel for stock Cyanogen OS13.x/13.0/12.1 with hardboot support (To use the stock Rom as primary Rom in Multirom)
Code:
Use my kernel only if you are sure about the risks of flashing custom Roms/Kernel to your device. I'm is not responsible for any damage caused by using one of my files.
I have attached 2 file types.
The .img files to flash it with fastboot or an kernel flasher app.
The .zip files to flash it with a custom recovery
The COS13.0 ZNH0EAS26M kernel will also work on COS13.0 ZNH0EAS2JK
The COS13.1.1 ZNH2KAS2X1 kernel will also work on COS13.1.2 ZNH2KAS3P0
Sources:
https://github.com/bauner/android_kernel_oneplus_msm8974
thank you so much :victory::victory::victory:
just flashed this on top of your fix
phone is stuck at cyanogen logo now
apparently I should have update to CM12 first now everything is fine.
900 something views and 2 comments...! very supportive pple in this forum nowadays.. cant get even a referance.
Great Kernel mod. Thanks... Confirmed working on my 1+1 64GB. Flashed multiboot and used flashify to update TWRP.. great work.. Thanks again.
NOW ME PHONE RUNNING THE PASINO AND THE SOKP.. MUSIC WHEN AND HOW I WANT IT>
comexx said:
just flashed this on top of your fix
phone is stuck at cyanogen logo now
apparently I should have update to CM12 first now everything is fine.
Click to expand...
Click to collapse
The kernel in this thread is for cos12.1 YOG4P only!
It will not work with cos12 or cm11s
@bauner do you intend to develop this kernel any further? i like it
maxed4901 said:
@bauner do you intend to develop this kernel any further? i like it
Click to expand...
Click to collapse
If there will come another official cos update I will make a new version with multirom support.
Currently I will not add more features to the kernel because the stock kernel without any more features is currently working very fast and stable
bauner said:
If there will come another official cos update I will make a new version with multirom support.
Currently I will not add more features to the kernel because the stock kernel without any more features is currently working very fast and stable
Click to expand...
Click to collapse
yes it definitely is working well.. thanks though and look forward to future builds.:good:
bauner said:
If there will come another official cos update I will make a new version with multirom support.
Currently I will not add more features to the kernel because the stock kernel without any more features is currently working very fast and stable
Click to expand...
Click to collapse
Hi!
YOG4PAS2QL seems to be out.
Wondering if the kernel was changed, if yes, can you please release a patched version?
Tnx!
Hello?
Sent from my A0001 using Tapatalk
Pls provide kernel for latest OTA with multirom support
Hi @Bauer. I have been alive because of your kernel. I keep stock ROM as stock multirom base ROM and install other ROMs. It started with your YOG4PAS1N0 kernel version. Now that there's an update...I would like to request you to update version please.I cannot update otherwise..If I do..I will lose my other ROMs.. I do not wish to use another kernel except stock one please.
Dusha999 said:
Hi!
YOG4PAS2QL seems to be out.
Wondering if the kernel was changed, if yes, can you please release a patched version?
Tnx!
Click to expand...
Click to collapse
Phate00 said:
Pls provide kernel for latest OTA with multirom support
Click to expand...
Click to collapse
maxed4901 said:
Hi @Bauer. I have been alive because of your kernel. I keep stock ROM as stock multirom base ROM and install other ROMs. It started with your YOG4PAS1N0 kernel version. Now that there's an update...I would like to request you to update version please.I cannot update otherwise..If I do..I will lose my other ROMs.. I do not wish to use another kernel except stock one please.
Click to expand...
Click to collapse
The kernel source seems to be the same
https://github.com/CyanogenMod/android_device_oneplus_bacon/commits/stable/cm-12.1-YOG4P
I will check in the next days if there are changes in the init scripts.
If there are changes I will make an updated version soon.
But for now you can use my current kernel in YOG4PAS2QL too.
I use it myself without any problems
bauner said:
The kernel source seems to be the same
https://github.com/CyanogenMod/android_device_oneplus_bacon/commits/stable/cm-12.1-YOG4P
I will check in the next days if there are changes in the init scripts.
If there are changes I will make an updated version soon.
But for now you can use my current kernel in YOG4PAS2QL too.
I use it myself without any problems
Click to expand...
Click to collapse
Thanks for keeping the kernel alive @bauner. And thanks for confirming that but still look forward to the update.
maxed4901 said:
Thanks for keeping the kernel alive @bauner. And thanks for confirming that but still look forward to the update.
Click to expand...
Click to collapse
I have now compared the YOG4PAS1NO and YOG4PAS2QL ramdisks they are exactly the same.
So there is currently no need to make a new version
bauner said:
I have now compared the YOG4PAS1NO and YOG4PAS2QL ramdisks they are exactly the same.
So there is currently no need to make a new version
Click to expand...
Click to collapse
YOG4PAS3JL is out
It is reported to have Google search bar fix and 1NOV security update from Google.
Don't know if this patch covers kernel as well...
Sent from my A0001 using Tapatalk
Dusha999 said:
YOG4PAS3JL is out
It is reported to have Google search bar fix and 1NOV security update from Google.
Don't know if this patch covers kernel as well...
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thx for the info.
I will check it soon
Dusha999 said:
YOG4PAS3JL is out
It is reported to have Google search bar fix and 1NOV security update from Google.
Don't know if this patch covers kernel as well...
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
There are a few changes in the init scripts.
I have attached a new version for YOG4PAS3JL in the first post
Thanks for super duper fast update...
# Welcome To Tenseigan Kernel #
Code:
[CENTER]* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, corrupted partition, nuclear disasters
* Please do some research before using this mod!
* YOU are choosing to make these modifications,
* If you point the finger at me for messing up your device, I will laugh at you.
This kernel will overwrite your system modules[/CENTER]
Download Link1. A500H
2.A500G
Features :
1. Adreno Idler
2.Knox disabled
3.Patched For Root
4.Prima wlan modules
5.Optimisation 306
6.Intelli Thermal
6.Otg support
7.Permissive
8.init d support
And maybe some more ...
Credits:
#Bulgaricus
#All testers
[Thread will be updated soon with more variant support]
XDA:DevDB Information
[KERNEL][MM+NN][A5 2015][GCC 4.8]Tenseigan Kernel-v1.0, Kernel for the Samsung Galaxy A Series
Contributors
letsmakecakes
Source Code: https://github.com/letsmakecakes/Tenseigan
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2017-11-23
Created 2017-11-23
Last Updated 2017-12-14
Reserved
Tenseigan Noguat Series Kernels
1. A500H
2.A500G +A500F+A500M
Reserved
Thanks. Will try again soon.
A50oF?
Sent from my [device_name] using XDA-Developers Legacy app
Fild5x said:
Thanks. Will try again soon.
Click to expand...
Click to collapse
Will be waiting for feedback in here.
hmdbreakfast1 said:
A50oF?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
YEap..COming in hours.
Yes waiting for A5 2015 A500F and many thanks sir! ?
This kernel work on enigma Rom but it Darin battery
The best kernel so far on a5h.
I have tried this kernel on both hades and aryamod roms. It performs wonders in terms of speed and smoothness of rom. Battery usage still is an issue especially on internet. However battery is incredibly good during idling. I would recommend the kernel to other people using a5h.
A500F Support Plz..
Fild5x said:
I have tried this kernel on both hades and aryamod roms. It performs wonders in terms of speed and smoothness of rom. Battery usage still is an issue especially on internet. However battery is incredibly good during idling. I would recommend the kernel to other people using a5h.
Click to expand...
Click to collapse
Noticed that on aryamod the radio is disturbed.
Kernel for g also working good, no any error at all on my a500f - j2ux rom
icesehman said:
Kernel for g also working good, no any error at all on my a500f - j2ux rom
Click to expand...
Click to collapse
What? No error?
Cakzemprongzzz said:
What? No error?
Click to expand...
Click to collapse
No. No error at all. Very good kernel first time.
Fild5x said:
No. No error at all. Very good kernel first time.
Click to expand...
Click to collapse
I mean A5F have A5G Kernel..
I dont know for rom other than j2ux..but yes, g also can for f and i think, battery and performance is getting better.
icesehman said:
I dont know for rom other than j2ux..but yes, g also can for f and i think, battery and performance is getting better.
Click to expand...
Click to collapse
How about lag? I got lag On coderom
Anybody using tensiegan kernel on a a500g with hades ROM?
Thanks but any kernel lags on @corsicanu 's roms... I will try to use it with stock ROM