Q&A for [CUSTOM ROM] CyanoKat for micromax a65 & DTC gt7 [SC6820]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [CUSTOM ROM] CyanoKat for micromax a65 & DTC gt7 [SC6820]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Rooting trouble..
I find difficult to root using the method mentioned in this post.... i tried it many times but does not start downloading.... then i rooted the phone using root genius software and it has automatically installed kinguser app which allows all root permissions...
MY QUESTION IS THAT... Can this be used for flashing the CyanoKat rom on my micromax a65 or will i need to root my device using your method ??? pls reply fast.. pls...
Any way an advanced thx from my side
Naveen Hari
Thx a LOt Dev's
At last i got my phone a new appearance...Thx a lot Dev's i luv u so much...
But some suggestions i am going to make is that :
1)Need to replace almost all apps with the kitkat style system apps....like clock, camera etc...
2)Change the boot animation, its not at all cache and nice it is very poorly designed...I have a suggestion that i would design the boot animation and logos (My portfolio @ facebook.com/nbcreationsonline)
3)The recent app tray has many bugs like, we cannot swipe the recent apps and close it.
4)The status bar doesn't look nice...
5)and little more...i will refer later
I Hope u will show your concern towards my suggestion and will fix almost all the bugs in your next update and make this rom the best rom for micromax bolt a65...
Thx a lot Dev's
Luv Luv Luv
Karbonn a6
i got same problem,my touchscreen doesnot work.Can u fix that problem?
Micromax A65, having some problems, pls. help...
I have rooted my micromax a65 with unsecured boot.img for v5 .... not got the stock rom from the link that was given in the developing section .... So, downloaded a firmware from aa other site ... I have rooted it successfully and also fixed bumped IMEI ....... but the auto off has not fixed..... firstly I have installed the S4 Rom .... , then the Cyanokat L-edition (both have bluetooth bug) , then now Cyanokat v1.0 but the same problem of auto off persist ...... pls. help ... I am just a beginer (14 yrs. old) ...... pls. help as soon as possible ..... and ofcourse sorry for my bad english.....
Related
Q&A for [ROM][4.2.2][STABLE][Micromax A90s / Blu Vivo 4.3][STABLE][4.2.2][ROM]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Micromax A90s / Blu Vivo 4.3 / Custom ROM 4.2.2
Shivam Bhalla said:
MUSIC app crash Fix with BLEND MOD by @Rishabh Bagrecha
For more information what is BLEND Move HERE
BLEND IS ALREADY INCLUDED IN FIX PATCH
Code:
Changelog Patch fix
1.MIUI MUSIC App with integrated Equalizer
2.Samsung Calender
3.Dashclock
4.Working on more minor Bug Fix
Download LINK
CLICK HERE
Dont wipe anything just Simply Flash IT
Click to expand...
Click to collapse
Hi
I am Micromax A90s user and upgraded to the below Custom ROM. Details are below
Model Number : BLU VIVO 4.3
Android Version: 4.1.1
Baseband Version: MAUI.11AMD.W12.22.SP.V15.P3, 2013/02/23 09:37
Kernel Version: 3.4.0
Build Number: ZhaoBlast JB 2013-03-22 19:26
Can you please tell me whether I can install your ROM. If so please provide the download link, the one pasted in this forum is not working and also let me the procedure how to install the ROM for my case which is already using JB 4.1.1
Awaiting for your reply.
Thanks
Vijay
QA Bot said:
Q&A for [ROM][4.2.2][STABLE][Micromax A90s / Blu Vivo 4.3][STABLE][4.2.2][ROM]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Click to expand...
Click to collapse
Hi,
Since I am new user, the developer not allowing me to reply in the same thread. So only I am raising a new thread. Otherwise please let me know what I need to do. I will follow that.
Thanks
Vijay
Dont boot up
I followed every step that you mentioned in my mobile micromax A90S but it didn't boot up Please help. Installed on stock rom
huzef ansari said:
I followed every step that you mentioned in my mobile micromax A90S but it didn't boot up Please help. Installed on stock rom
Click to expand...
Click to collapse
First install JB 4.1.1 and then install this ROM. Can you please paste the "About Phone" details.
want 4.4 for micromax a90s pls
Good afternoon,
From what I understand , it is necessary to replace the BT_ADDR file that is in version 4.2.2 at version 4.1 file , this will cause the Bluetooth feature to work .
someone saved this file, and can send ? I currently have version 4.2.2 running and did not want to reformat my device ... or no other way to operate the Bluetooth feature?
[Q&A] Factory Reset/Firmwares for Indian Android Devices [Micromax, Celkon, Karbonn
Q&A for Factory Reset/Firmwares for Indian Android Devices [Micromax, Celkon, Karbonn etc]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Factory Reset/Firmwares for Indian Android Devices [Micromax, Celkon, Karbonn etc]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
i want official magicon m2 rom
hey to every 1 and want some help i have magicon m2 handset but the software have missing wifi and gprs drivers so any 1 can give me a rom for this phone
pls add more files or firmware like karbonn...
I have a Datawind Ubslate 3G7 tab and want either to root or Flash a custom rom then how and which rom should i do? Where is the firmware of custom rom ? Can anyone help me?[emoji45] [emoji45]
stock rom for iball andi 5li
hey.....
can anyone please upload stock rom for iball andi 5li.
videocon tablet flashing
https://docs.google.com/folder/d/0Bw...hKzNr0oh1FlcJI
https://docs.google.com/folder/d/0Bw...kVLWW5STDRJWkk
go to tgeese link you will find flash file and flasher for vt75c
any problem call me on +918347880826
Karbonn A96
Any chance to get Karbonn A96 files? Thanks in advanced!
Micromax A310 pls pls
Micromax A310 pls pls
Micromax Canvas A114 format every time i power on my mobile
Micromax Mobile I rooted ... after that when I power on it, it formate to factory setting ....
Please help me..
I had a big problem
my mmx has not any rom installed in it how to do that please help
Need Micromax Bolt a24 stock rom.
Bricked mine :'-(
Hit THANX if you are the best
Can anybody get any custom rom micromax A 108 canvas l (Kitakat 4.4.2) is i m not getting it anywhere.
My favourite roms
1. CM
2. Material rom
3. Dark l rom
4. Lollipop rom if possible
Sent from my Micromax a 108 using XDA Free mobile app
Micromax bolt a27 vibrates endlessly on startup.
I believe the stock ROM's here are the .pac(packet file) for Micromax Bolt A27?We need to have a flashing tool for that and for which my phone is not responsive at all.All I can run is the Fastboot mode,I am stuck in a problem where it just vibrates endlessly whenever switched ON and nothing gets displayed on the screen.
This happened after I mistakenly flashed in a recovery.img into the system partition after which I wiped and re flashed but the problem persists.
Can the .img's be extracted from the .pac file and then be used via fastboot mode?
Please suggest.
thanks.
http://forum.xda-developers.com/showthread.php?t=2916802
hello !
i have celkon a119q hd ,rooted it and it has cwm recovery 6.0 when i try to flash a rom from external sd card
it says cant open rom.zip bad
installation aborted help me please
any latest roms for this phone please provde link please
Micromax & karbonn users can find stock roms for their devices by searching on xda with their respective model numbers. Almost all models stock roms are available to download on xda forums. Just be sure to back up stock kernel & recovery before using any custom recovery just in case.
Q&A for [ROM] SamFlare v6.3 Custom Rom For Micromax A116 - with S5 UI
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] SamFlare v6.3 Custom Rom For Micromax A116 - with S5 UI. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
insatll rom
A116 insatll after install aborted erros plz help
Thanks for the good rom
Please any update for fix little bugs
I lose my both imei after flashing this Rom. And I am unable to rewrite it by engineering mode
By *#*#3646633#*#* .I like this Rom and want it on my phone please help me about this problem.
My email - [email protected] please help me about this problem
Samflare 6.3 have some network unstability
I see one of my sim network missing sometimes. Whereas nothing like that happens with original firmware. Overall no other major bugs
SamFlare on Noir A600 3G Issue
Dear I Just installed Rom Samflare 6.2 then update 6.3. All is working good except 3G. Please help after this It will be very excited for me.
http://thebroodle.com/micromax/best-rom-for-micromax-a116-canvas-hd-galaxy-s5-ui/
hi
This is my first custom ROM that i have installedi My Micromax HD A116,i and i have sucessfuly done along with mt Collegue,3 Cheers to the developer,
i faced a issue after the 6.3 patch version was installed,when i tried to capure a picture thru camers the camera is not responding,it is showing me a gree screen with camera options and cannot connect to the camera,please sort out this issue for me
regards
Dk
1. I downloaded S5 Custom Rom for my Micromax A116 and it worked fine.
2. Then I downloaded "Update v6.2 to v6.3" from all mirrors but it seems the file is corrupt
3. Then I downloaded Update v6.3 and flashed the same way I did for point no.1 then it stopped working
After performing point no.3, the phone stopped working. It was getting hung on the SAMSUNG logo. So I went to recovery mode and did point no.1 again. Now it is working fine.
Can someone tell me how to install the Update v6.2 to v6.3 and Update v6.3 patch?
Thank you.
PS: The phone looks cool... thanks to the developer for the wonderful rom.
can i flash 6.3 after version 6 or do i have to flash 6.2 first? thank you.
eisenheim888 said:
can i flash 6.3 after version 6 or do i have to flash 6.2 first? thank you.
Click to expand...
Click to collapse
I tried Update v6.2 to v6.3 but the file that is getting downloaded seems to be corrupt so I did 6.3 but phone hangs in samsung logo. I am also waiting for an answer to my question posted above you
wipe ccach
Did you forgot to mention wipe cache or it isnt necessary
Reply ASAP bcz i want to flash this rom on a116
threads samflare v6
Multi window not working
Smart pause ot working
No Samsung keyboard
samflare v6
Installed samflare v6 and updated to 6.3, everything is fine except network.
Please help to solve this, or else i have to change ROM again.
Phone: Micromax A116
installed on: 2015 05 04.
update
will there be any update for this nice rom??
lock screen not changing.
Hi Bro.
Thanks for the S5 Custom Rom.. liked it very much. and appreciate ur hardwork. lock screen is not changing when i try to change the wallpaper.
I want a help
Dear manunair sir i want a help from you i want to change platlogo of this rom can you please tell me how to do this you can explain me at [email protected]
I am thankful of you
Working of samflare v6.3
i have question that does it work for micromax canvas A116i
Q&A for [CWM] recovery for Micromax A108 L
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [CWM] recovery for Micromax A108 L. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Regarding Micromax CANVAS L A108
SIR Can you show me how can i totally do that cwm recovery or rooting through video or through snapshot , please all the viewer are not perfect in doing cwm recovery so if you would show us how to recovery and get 5gb free so it would be very useful for all of us
Hey when will I get official upgrade of lollipop 5.0 for my micromax canvas l a 108
Sent from my Micromax A108 using XDA Free mobile app
Sir, pls help me
when i click the download button in sp tool is makes a hour but there is no improvement in process.....
pls sir send me a video tutorial to my mail
[email protected]
pls sir help me................
I know sir why your mmx a108 brick
because the uboot.bin is not flash to your mmx a108 for the MyPhone Ocean Pro Stock Jellybean Firmware..
all you wanna do is to rename the uboot into lk yeah... "lk.bin like the extension is *.bin ... rename it into lk
then you now using the stock rom of myphone ocean pro jb..
Im, MyPhone Ocean Pro user.. and I use the Wiko Slide Kitkat Firmware.
Hey is the any theme so that my phone MMX a 108 look like lollipop 5.0 I like its notification bar. Can anybody get that 5.0 notification bar for my Micromax canvas l A108. Thanks in advance
Sent from my Micromax A108 using XDA Free mobile app
SanjayKumar2000 said:
Sir, pls help me
when i click the download button in sp tool is makes a hour but there is no improvement in process.....
pls sir send me a video tutorial to my mail
[email protected]
pls sir help me................
Click to expand...
Click to collapse
Did u get the video coz there are no answers on this page. Try to use use Vcom USB drivers while flashing.
Sent from my Micromax A108 using XDA Free mobile app
[Q&A] [XPERIA][4.4.4 LIKE][MT6589 TO MT6572] PURE XPERIA Z3 ROM FOR INTEX AQUA i4+
Q&A for [XPERIA][4.4.4 LIKE][MT6589 TO MT6572] PURE XPERIA Z3 ROM FOR INTEX AQUA i4+
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [XPERIA][4.4.4 LIKE][MT6589 TO MT6572] PURE XPERIA Z3 ROM FOR INTEX AQUA i4+. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
mt6572 kitkat 4.4.2 cherry volt s910
Why is tat noy working for my mt6572 cherry mobile i follow yhe exact instruction but the rom is for mt6586 parin i thought it is ported to mt6572 . Then the sceen turnd into blurred .. But luckly i've alteady made backup .. Please fix this rom for mt6572 cherry mobile volt s910
Not yet completed
The rom is not yet completed. when i flash the rom. i choose to install all of the apps. when it finish nothing is installed except for contacts and the other. theres no social life the Xperia cameras. Even the movies app end the whats new apps. Please Fix this Rom. Thanks
Not completed
There is a lot of missing apps. Including the other xperia apps. and it doesnt have any file explorer app. Please fix this
dude its originally built for mt6589 go find bgos10 in xda u will see this one is another just for mt6572