Hi, I created this script for those who like shortcuts. This will install CWMPHILZ/TWRP on your phone without having to fastboot flash them!!
Prerequisites--> unlock bootloader
Code:
[B]DISCLAIMER[/B]
I'M NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE.
IF YOU POINT YOUR FINGER AT ME AFTER BRICKING YOUR PHONE, I WILL LAUGH AT YOU. BECAUSE IT WAS [B]YOU[/B] WHO CHOSE TO DO IT.
INSTRUCTIONS
1. DOWNLOAD THE ZIP AND EXTRACT IT.
2.YOU'LL FIND TWO IMG FILES AND 2 .BAT FILES ALONG WITH FASTBOOT.
3.BOOT YOUR PHONE INTO BOOTLOADER MODE(power off phone, then press power+vol-down)
4. FLASH---->
4.1 TO INSTALL PHILZ, RUN PHILZ.BAT
4.2 TO INSTALL TWRP, RUN TWRP.BAT
5. ENJOY!!!!
Successfully tested on XT1052. It might work on other devices.
DON'T FORGET TO HIT THANKS!!! IT WON'T COST YOU ANYTHING
Reserved by op
Goog oneclick
reserved
Reserved
Twrp has their own install app. You can also use flashify to flash image files.
On moto x, u have to flash recovery and then root. Flashify requires root permissions so it's not possible to flash using flashify
Sent from my XT1052.
nish0021 said:
On moto x, u have to flash recovery and then root. Flashify requires root permissions so it's not possible to flash using flashify
Sent from my XT1052.
Click to expand...
Click to collapse
That would be correct. Sorry I am use to just typing fastboot flash recovery ****.img
does philz recovery solve the problem with editing the updater-script of a CM12 nightly prior flashing? This has to be done with latest TWRP every time I flash a new nightly
U can flash nightlies with the twrp recovery I provided. I've successfully flashed cm12 with it.
Sent from my XT1052 using XDA Free mobile app
Check out my video on cm12 on moto x gen 1
Lollipop on moto x gen 1 (cm12 official): http://youtu.be/ptTbgi8pAvY
Sent from my XT1052
My bootloader is unlocked, but once I boot into fastboot, then go into recovery (which just shows the android on its back with the red exclamation point) and press the power button to bring up the menu, I only have the option to flash update.zip. What am I doing wrong?
doubleojon said:
My bootloader is unlocked, but once I boot into fastboot, then go into recovery (which just shows the android on its back with the red exclamation point) and press the power button to bring up the menu, I only have the option to flash update.zip. What am I doing wrong?
Click to expand...
Click to collapse
It means that your recovery is not properly flashed Try to flash the rcovery again
anadarco7 said:
It means that your recovery is not properly flashed Try to flash the rcovery again
Click to expand...
Click to collapse
Thank you
Thanks much. I was able to unlock my bootloader on my xt1053 through motorola's unlock program. I was struggling to figure out how to root and get a recovery on. This was able to do the trick and got recovery installed for me!!!! Then I was able to flash superuser from the recovery!!!
thanks a bunch
Worked in Moto X XT1058 Brazilian :good:
Don't just tell thanks... Hit thanks! ?
Sent from my Moto X¹
Which version of each recovery did you include.?
I believe xposed for 5.1 is very picky and specific about recoveries used for flashing it.
... or just use this I fcan flash TWRP and other recovery )))
U can download latest recovery, rename it to twrp.img or philz.img and use the same script
Sent from my Moto X¹
Related
Hello,
Many people have problem with bricked device because they complied many diffrent tutorials and broke their G2.
I will explain you how to root stock rom/update bootloader and back to stock via lg flashtool.
Perform operations step by step
Okay, so first thing - ROOT STOCK LG ROM.
1. Stump ROOT (Without usb cable, working with 20h ROM)
Stump Root v1.2 (Newest version)
-->> Download Stump ROOT v1.2 <<--
Go to settings>general>security and check "Unknown Sources" to install external APKs.
Now install Stump ROOT app from download link. (In installation progress Android will ask you for install permisions because this integrate in system code. OFC ACCEPT)
Open Stump ROOT and press GRIND, then wait sec and press BruteForce, after 1-2 min your device will restart and now u got ROOT, u need install -->> SuperSU <<-- from market.
2. Install TWRP for your device. (Autorec)
-->> Download AUTOREC <<--
Okay, it's easiest step, just install Autorec application (Be sure it's for your model in file name!)
Open, accept and flash.
This way will downgrade your bootloader and kernel. After device reboot u have already ROOT and TWRP.
Now u can update first your TWRP to newest 2.8.5.1
-->> HERE THEARD WITH NEW TWRP <<--
If you download new TWRP, then u can easy flash it via -->> Flashify <<-- app from market. There select recovery>zip and select your new TWRP, it will reboot device to recovery and flash. (BE SURE IT'S FOR YOUR D802 MODEL!!)
3. Update bootloader. (IMPORTANT!!! U ALWAYS NEED UPDATE BOOTLOADER WITH VERSION ROM WHAT YOU ALREADY HAVE, IF YOUR ROM V20H, USE 20H BOOTLOADER, IF YOU HAVE 20D, THEN USE 20D BOOTLOADER OR UPDATE YOUR DEVICE TO 20H!!)
Now u need becareful, because it is easy way to brick device if you will not perform tutorial.
-->> Download v20h bootloader <<--
Download bootloader to your memory storage in device, and open flashify, press Menu button and Reboot Recovery, when it will reboot to TWRP, press INSTALL and select bootloader v20h zip file in path you downloaded it.
Now reboot device and Enjoy ROOTED device with newest bumped TWRP and newest bootloader.. AND NO BRICK )
Enjoy your powerfull device.
I will update theard with new steps like install kernels, back to stock step by step, easiest way to secure your device.
I know there are many tutorials, but we have still many people on XDA with problems like QS_BULK device, 9008, secure verify problem etc etc. So this is way to bypass every danger things.
Im not creator of any used in this tutorial mods, i just complied few theards to few easy steps
Credits:
Dorimanx
Cloudyfa
blastagator
jcase
Codefire Team
Hi good Job!
I have Two questions.
Can i upgrade my twrp Version with flashing the zip file in twrp?
Which Bootloader version use cyanogenmod 12?
Thank you!
A few additional info for the D802 variant:
-You don't NEED to change boot loader if you're fully on stock unless:
--You plan to use AOSP Lollipop
--You use any JB based ROMs (they should say in their respective threads for the D802)
-If you stick with the KK boot loader, only flash BUMPed flashables (they should state if they use this method)
-I recommend to use Blastagator's TWRP as it has thermal protection that stock TWRP doesn't have
-Only flash ROMs/any other flashables while the phone is cool
-Most ROMs can use the KK modem unless stated otherwise
Correct me on any misunderstood/incorrect information
---------- Post added at 10:56 AM ---------- Previous post was at 10:48 AM ----------
exxilee said:
Hi good Job!
I have Two questions.
Can i upgrade my twrp Version with flashing the zip file in twrp?
Which Bootloader version use cyanogenmod 12?
Thank you!
Click to expand...
Click to collapse
1. You should be able to
2. You should be on the JB boot loader, we don't have the 12B one, that's for another variant
exxilee said:
Hi good Job!
I have Two questions.
Can i upgrade my twrp Version with flashing the zip file in twrp?
Which Bootloader version use cyanogenmod 12?
Thank you!
Click to expand...
Click to collapse
Yes. If you installed AutoRec and u are able to open recovery, you can flash via older twrp. It is no problem
goodguy25 said:
A few additional info for the D802 variant:
-You don't NEED to change boot loader if you're fully on stock unless:
--You plan to use AOSP Lollipop
--You use any JB based ROMs (they should say in their respective threads for the D802)
-If you stick with the KK boot loader, only flash BUMPed flashables (they should state if they use this method)
-I recommend to use Blastagator's TWRP as it has thermal protection that stock TWRP doesn't have
-Only flash ROMs/any other flashables while the phone is cool
-Most ROMs can use the KK modem unless stated otherwise
Correct me on any misunderstood/incorrect information
---------- Post added at 10:56 AM ---------- Previous post was at 10:48 AM ----------
1. You should be able to
2. You should be on the JB boot loader, we don't have the 12B one, that's for another variant
Click to expand...
Click to collapse
I just wrote this tutorial for Stock, and it's always good to have new stuff. It's safe with bumped twrp and it shouldn't make any problem with device.
Thank you guys!
So i dont need to change my Bootloader to Flash cm12?
Installed twrp via autorec and im on Stock kk.
exxilee said:
Thank you guys!
So i dont need to change my Bootloader to Flash cm12?
Installed twrp via autorec and im on Stock kk.
Click to expand...
Click to collapse
U no need, no matter u have JB or KK bootloader if you use CM12 or other AOSP ROMs
Ganjax said:
I just wrote this tutorial for Stock, and it's always good to have new stuff. It's safe with bumped twrp and it shouldn't make any problem with device.
Click to expand...
Click to collapse
Ok, good. I liked your tutorial, pretty informative.
Hello, i'm stuck at this step :
"3. Update bootloader. (IMPORTANT!!! U ALWAYS NEED UPDATE BOOTLOADER WITH VERSION ROM WHAT YOU ALREADY HAVE, IF YOUR ROM V20H, USE 20H BOOTLOADER, IF YOU HAVE 20D, THEN USE 20D BOOTLOADER OR UPDATE YOUR DEVICE TO 20H!!)
Now u need becareful, because it is easy way to brick device if you will not perform tutorial.
-->> Download v20h bootloader <<--
Download bootloader to your memory storage in device, and open flashify, press Menu button and Reboot Recovery, when it will reboot to TWRP, press INSTALL and select bootloader v20h zip file in path you downloaded it. "
Edit : i flashed the rom without KK bootloader and it worked
-> I Was on 20H. I rooted, installed twrp, updated twrp. I've flashed 20d KK bootloader and now, secure booting error
I have access to download mode. What can i do do boot normally ? (i know i could probably flash a kdz but i don't really want to)
i cannot enter into the twrp by pressing the vol down + power, it just ask me whether i want to format, this means i still do not have twrp ?
coc014 said:
Hello, i'm stuck at this step :
"3. Update bootloader. (IMPORTANT!!! U ALWAYS NEED UPDATE BOOTLOADER WITH VERSION ROM WHAT YOU ALREADY HAVE, IF YOUR ROM V20H, USE 20H BOOTLOADER, IF YOU HAVE 20D, THEN USE 20D BOOTLOADER OR UPDATE YOUR DEVICE TO 20H!!)
Now u need becareful, because it is easy way to brick device if you will not perform tutorial.
-->> Download v20h bootloader <<--
Download bootloader to your memory storage in device, and open flashify, press Menu button and Reboot Recovery, when it will reboot to TWRP, press INSTALL and select bootloader v20h zip file in path you downloaded it. "
Edit : i flashed the rom without KK bootloader and it worked
-> I Was on 20H. I rooted, installed twrp, updated twrp. I've flashed 20d KK bootloader and now, secure booting error
I have access to download mode. What can i do do boot normally ? (i know i could probably flash a kdz but i don't really want to)
Click to expand...
Click to collapse
Well if you cant enter your recovery or system then you have to flash kdz.
chris7617 said:
i cannot enter into the twrp by pressing the vol down + power, it just ask me whether i want to format, this means i still do not have twrp ?
Click to expand...
Click to collapse
You already flashed TWRP right? If so then you need to confirm it twice with the power button. It says like format data/factory reset but it will boot into the custom recovery.
please help me...i have a lg g2 d802 32gb model ..its a traded phone...when i got the phone it was running 4.4.2 kitkat the phone was rooted bt there was no suprrueser app i installed the app and then i flashed recovery with autorec now whenever i open my data or wifi and use my phone for some minutes my screen becomes unresponsive is it due to the jellybean bootloader that the autorec installed or something else please help me...
Recovery combo gone
The thread seems like dead now, but maybe I get help .
I flashed 20H and now there is the recovery combo, when I try pwr + volume down it simply reboots . The recovery is instaled, but I only can access it from software (that now is corrupted, so, soft brick).
Wrong combo
chris7617 said:
i cannot enter into the twrp by pressing the vol down + power, it just ask me whether i want to format, this means i still do not have twrp ?
Click to expand...
Click to collapse
You're not soft bricked, it's just that key combo changes in 20H, new combo to enter recovery is vol down + power key, As lg logo appears, release keys and press vol up + vol down and you can easily access twrp
and i ran intro bootloop.. help!
I'll update theard soon to aosp/lollipop support, bootstacks explains etc.
Wysłane z mojego LG-D802
I was able to root and install xzdualrecovery on ma C6833 after which I installed blisspop 5.1 which I'm currently running.
Anytime I rebbot in to recovery below is what happens. Please help!!!!!!!
eocobby721 said:
I was able to root and install xzdualrecovery on ma C6833 after which I installed blisspop 5.1 which I'm currently running.
Anytime I rebbot in to recovery below is what happens. Please help!!!!!!!
Click to expand...
Click to collapse
I think your recovery must have gotten flashed with other one, just use the installer from here and reflash nuts dual recovery http://nut.xperia-files.com/
Had the same issue on bliss 5.1, all methods suggested failed (multirom, twrp installer, fastboot flash, etc..) even disabled in developer option the cyanogen recovery update switch.
Then i read this post http://forum.xda-developers.com/showpost.php?p=59098385&postcount=50
so basically i entered:
su
dd if=/mnt/sdcard/fotakernel.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
because i have put the recovery in my sdcard root (/mnt/sdcard) and renamed the .img in the link into something simpler (fotakernel.img), but you can use whatever filename modifyng the command above.
I had this problem too just yesterday. All I did was to flash twrp using Rashr flash tool from playstore. I'm back to twrp recovery.
Thank
Thanks guys for your responses. I really appreciate. I used da terminal emulator method and was able to install twrp and flash ma rom but when I got to da start screen I notice ma screen doesn't response to touch any more. Guess togari isn't meant for me so I'm going back to ma old phone. I appreciate all your help.
Thanks
Well with the fact that i just 'Beginner' in android -developer world i spent two days (read and search) to just know what the right steps to have unofficial rom . So this is not thread from professional it's just what i understand so far . (SORRY FOR BAD ENGLISH)
It's some simple Steps :
1) First you need to root your Device to have fully adminstrator . (This make you can execute terminal order from you and the apps)
2)After you get root install flash tool To do Setup 4 . (Rasher or Flashify)
3)You must UNlocked you bootloader . (So the new rom can edit your boot process)
4)Install custom Recovery [CWM]or[PHILZ]or[TWRP]. (This make you can do zip install from external card)
5)Get your rom download and copy to your external card.
NOW YOUR READY
OK Now my guide is for LG G2 MINI (D618)
The custom rom is [ROM][5.1.1][D618/D620] Cyanogenmod 12.1 Stable
And my phone have OFFICIAL android 5.0.2 lollipop
1) ROOT : FOLLOW THIS GUIDE
http://forum.xda-developers.com/g2-mini/development/root-root-g2-mini-lollipop-t3123652
If it not success . do factory reset and start the root again but this time (don't setup superSU from store and don't restart your phone and IT's su Not Su) this should success .
2) DOWNLOAD THE FLASH TOOL FROM PLAY STORE AND KEEP IT
3) BOOTLOADER : FOLLOW THIS GUIDE (YOU MUST TAKE BACKUP FOR YOUR PHONE FIRST)
http://forum.xda-developers.com/g2-mini/development/bootloader-d620-d618-t3127819
4) CUSTOM RECOVERY : FOLLOW THIS GUIDE (CWM SUCCESS WITH ME) (JUST FLASH .IMG FILE WITH SETUP NUM (2))
http://forum.xda-developers.com/g2-mini/development/recovery-lg-g2-mini-d618-v10c-t2854493
5) DOWNLOAD THE FILE YOU NEED FROM HERE AND COPY TO EXTERNAL CARD AND FOLLOW Installation :
http://forum.xda-developers.com/g2-mini/development/rom-cyanogenmod-12-1-stable-t3175833
NOW IF THIS SETUP'S SUCCESS THE HARD PART IS OVER.
6) Now reboot into recovery mode (you will find this in Flash tool)
in recovery mode you need just two things (WIPE AND INSTALL)
7)CHOOSE "Wipe" CACHE, DATA and SYSTEM (THIS WILL DELETE YOUR PERSONAL DATA AND SETTING AND EVERY THING)
8)CHOOSE INSTALL ZIP FROM EXTERNAL CARD AND CHOOSE FIRST KK_BOOTSTACK_D618_1.1.ZIP THEN cm-12.1-20150828-UNOFFICIAL-g2m.ZIP
9) RECOMMENDED TO INSTALL GAPPS (tk_gapps-modular-pico(uni)-5.1.1-20150824-signed.ZIP)
10) NOW YOU HAVE DONE .. REBOOT YOUR PHONE AND IT WILL DO SOME INSTALL FOR ABOUT 10 MINUTE AND YOU WILL SEE SETTING SETUP ON THE SCREEN
11)F YOU HAVE unstable SIM signal JUST GO TO RECOVERY AND WIPE ONLY CACHE IT WILL BACK TO NORMAL.
THIS IS MY experience ON MY G2 D618 I DON'T KNOW ABOUT OTHER PHONE'S
THANK YOU XDA AND XDA-DEVELOPER'S FOR YOUR HARD WORK .
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
snoK123 said:
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
Click to expand...
Click to collapse
Make sure that Unlock bootloader process success i have this problem to and i Discovered that the unsuccess unlocking bootloader operation the Responsible for this error as i understand.
Flash custom recovery process deleting the original recovery but because of unsuccess unlocking bootloader Rasher Deleting original recovery but he cannot install the new custom recovery so what i do in this case .
1)Download official android lollipop from here (chose your country ) its KDZ File and flash with LG Flashtool 2014 Here
Now do the setup from the First setup .. and setup Num 2 i just mean Flash Custom Recovery File (Dont use TWRP Use CWM with Flashify .. Rasher didn't success with me ) Hope you make it
snoK123 said:
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
Click to expand...
Click to collapse
this is the stock android recovery that means that you didn't or couldn't flash a custom recovery
make sur you extracted the zip file and flashed the recovery.img with flashify
Hmmm, did everything exactly like you've written until flashing recovery. Now I'm stuck with attached screen when entering recovery...
Any idea?
Thank you!
snoK123 said:
Hmmm, did everything exactly like you've written until flashing recovery. Now I'm stuck with attached screen when entering recovery...
Any idea?
Thank you!
Click to expand...
Click to collapse
this is the fastboot screen
the recovery you tried to flash is corrupt make sur the file isn't corrupted and the that is matching your device
i think your device is d620r and your trying to flash the one from the thread [RECOVERY][CWM][PHILZ][TWRP] G2 Mini D618
if you can boot into system reflash the matching recovery TWRP for your device if you can't connect your phone to pc
use fastboot to flash the recovery
http://forum.xda-developers.com/g2-mini/development/recovery-twrp-2-8-3-0-recovery-lg-d620-t2990196
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
snoK123 said:
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
Click to expand...
Click to collapse
don't know what's wrong !! if bootloader was locked you will have a security error on boot not the fastboot screen when enterig to recovery maybe you're doing the wrong combination to access recovery try with an application or with flashify or rasher to reboot to recovery
snoK123 said:
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
Click to expand...
Click to collapse
give us screen shot of (about software) in your phone
I All, i lost two days trying to flash the recovery with rashr ....
With flashify everything was ok!!!
So please try with it
At least on my case the problem was just the app rashr that does not work on my phone
xander33 said:
I All, i lost two days trying to flash the recovery with rashr ....
With flashify everything was ok!!!
So please try with it
At least on my case the problem was just the app rashr that does not work on my phone
Click to expand...
Click to collapse
The same happen with me so I put the general tool for all users and I mentions the successful tools that work with me
Sent from my LG-D618 using XDA Free mobile app
So the OFFICIAL 6.0.1 is already out and this is not the BETA version. It's for consumer release.
So how do you get to this eh?
NOTES: Flashtool can be used for both LB/UB. You won't lose DRM keys or unlock bootloader if you flash via flashtool.
1. Install Flashtool (get it here: http://www.flashtool.net/downloads.php).
2. There is a XperiFirm option there which would allow you to download official FTF files.
3. Navigate your way to Z3 Compact and grab the D5803 version US Variant (since this is configured for GLOBAL-LTE but i might still need to test bands). Or just grab anything you want there as long as it's version: 23.5.A.0.570
3. Flash using flashmode (hit the lightning icon there).
Now there's this "WIPE" Box, you have 2 options!
- Check User data and App logs and hit flash -- this will factory reset phone so you better have a backup!
- Leave them UNCHECKED if you want to retain your apps from your previous STOCK ROM. (might automatically uninstall incompatible apps in the process).
Once it asks for your device to be connected. Do as it says (power down, then hold the vol. down button as you plug the phone in).
-- this should start flashing.
4. After the process you may now boot the phone and there you have it!
-- Things below require unlocked BL --
If you want root, you can use fastboot and TWRP 3.X (I've tested the TWRP version 3.0.2 on the 6.0.1 beta before)
send this command on fastboot:
Code:
fastboot flash recovery <your twrp img here>
and hit enter. It must return 'OKAY'.
Unplug phone then boot into recovery and flash your SuperSU.zip
https://download.chainfire.eu/924/SuperSU/BETA-SuperSU-v2.68-20160228150503.zip
MINE!
Give a link to proper TWRP image please
tRippinthehead said:
Give a link to proper TWRP image please
Click to expand...
Click to collapse
If you have a locked BL, then root and install DualRecovery. There is an excellent thread here on XDA and you'll be on TWRP in no time. It also makes sure you'll have the drivers and flash tool and everything that you'll need for this already configured and ready to go.
If you have an unlocked BL, just go find TWRP and flash through fastboot.
Thanks OP!
P.S. I'm guessing for those with locked BLs, we can use PRFCreator and that FTF from Xperifirm to create a flashable, pre-rooted MM ROM...anyone tried? My Z3c is currently bricked (hopefully fixable) so I can't test at the moment.
Another DEV published a root method, both for the LB and UB:
http://forum.xda-developers.com/z3/general/wip-sony-android-6-0-mm-t3337357/page1
Keep in mind that that method was used for the BETA version of the rom, but yeah it's more likely that it would work with the consumer release. I'll update the OP once I relock my BL and successfully gain root with it.
The UB method there has the same effect as mine
I could not get root with the method, i would get boot img failure on flashing superSU in twrp with unlocked BL but to solve the issue i just flashed the advanced kernel for 6.0.1 and superSU flashed fine..not sure if anyone else is having this problem but this method did not work for me.
Do I keep root with locked bootloader with this method ?
Title of this topic is confusing, it seems that you need BL unlocked to get root.
hayatesan said:
Do I keep root with locked bootloader with this method ?
Title of this topic is confusing, it seems that you need BL unlocked to get root.
Click to expand...
Click to collapse
No you will lose root if you flash ftf on locked BL, you will need to root again using whichever method you used previously. If you flash an ftf file on ANY bootloader locked or unlocked it resets your phone to the contents of the ftf file.
Fictional Reality said:
No you will lose root if you flash ftf on locked BL, you will need to root again using whichever method you used previously. If you flash an ftf file on ANY bootloader locked or unlocked it resets your phone to the contents of the ftf file.
Click to expand...
Click to collapse
And which is the method to root this version with BL??
hv6478 said:
P.S. I'm guessing for those with locked BLs, we can use PRFCreator and that FTF from Xperifirm to create a flashable, pre-rooted MM ROM...anyone tried? My Z3c is currently bricked (hopefully fixable) so I can't test at the moment.
Click to expand...
Click to collapse
I'm giving it a try so I'll let you know.
EDIT: Admittedly I haven't got a clue how to use prfcreator but I tried and whilst it flashed there was no root or recovery.
2nd EDIT: XDR doesn't work on MM yet. I'll give TWRP a try.
TWRP 3.0.2 for Z3C https://dl.twrp.me/z3c/twrp-3.0.2-0-z3c.img.html
Buleste said:
I'm giving it a try so I'll let you know.
EDIT: Admittedly I haven't got a clue how to use prfcreator but I tried and whilst it flashed there was no root or recovery.
2nd EDIT: XDR doesn't work on MM yet. I'll give TWRP a try.
TWRP 3.0.2 for Z3C https://dl.twrp.me/z3c/twrp-3.0.2-0-z3c.img.html
Click to expand...
Click to collapse
Nice that sounds promising, at least it worked with the .zip that you created!
Which version of SuperSU are you using?
Thanks,
hv
hv6478 said:
Nice that sounds promising, at least it worked with the .zip that you created!
Which version of SuperSU are you using?
Thanks,
hv
Click to expand...
Click to collapse
I'm using BETA-SuperSU-v2.71-20160331103524.zip
However I was looking at the PRFCreator thread and it looks like if you add Recroot v2 as the SuperSU it should work. Not sure if it will give a recovery though.
EDIT: Okay. Didn't install the SuperSU binary properly but Kingroot could install the root though. Tried to remove it and replace with SuperSU and got a bootloop. However I have a cunning plan.
Xperia Z3 Compact - UB
I could not get TWRP recovery with the fastboot method.
I tried to install several "recoverys" but none are installed.
Help me please.
Buleste said:
I'm using BETA-SuperSU-v2.71-20160331103524.zip
However I was looking at the PRFCreator thread and it looks like if you add Recroot v2 as the SuperSU it should work. Not sure if it will give a recovery though.
EDIT: Okay. Didn't install the SuperSU binary properly but Kingroot could install the root though. Tried to remove it and replace with SuperSU and got a bootloop. However I have a cunning plan.
Click to expand...
Click to collapse
I love the sound of progress!
rvnlvrz said:
So the OFFICIAL 6.0.1 is already out and this is not the BETA version. It's for consumer release.
So how do you get to this eh?
NOTES: Flashtool can be used for both LB/UB. You won't lose DRM keys or unlock bootloader if you flash via flashtool.
1. Install Flashtool (get it here: http://www.flashtool.net/downloads.php).
2. There is a XperiFirm option there which would allow you to download official FTF files.
3. Navigate your way to Z3 Compact and grab the D5803 version US Variant (since this is configured for GLOBAL-LTE but i might still need to test bands). Or just grab anything you want there as long as it's version: 23.5.A.0.570
3. Flash using flashmode (hit the lightning icon there).
Now there's this "WIPE" Box, you have 2 options!
- Check User data and App logs and hit flash -- this will factory reset phone so you better have a backup!
- Leave them UNCHECKED if you want to retain your apps from your previous STOCK ROM. (might automatically uninstall incompatible apps in the process).
Once it asks for your device to be connected. Do as it says (power down, then hold the vol. down button as you plug the phone in).
-- this should start flashing.
4. After the process you may now boot the phone and there you have it!
-- Things below require unlocked BL --
If you want root, you can use fastboot and TWRP 3.X (I've tested the TWRP version 3.0.2 on the 6.0.1 beta before)
send this command on fastboot:
Code:
fastboot flash recovery <your twrp img here>
and hit enter. It must return 'OKAY'.
Unplug phone then boot into recovery and flash your SuperSU.zip
https://download.chainfire.eu/924/SuperSU/BETA-SuperSU-v2.68-20160228150503.zip
Click to expand...
Click to collapse
It doesn't work, I have trying out for a while, but fastboot doesn't flash anything
hv6478 said:
I love the sound of progress!
Click to expand...
Click to collapse
We have progress of sorts.
With prf creator add superSU and create the prerooted ROM.
In TWRP Wipe everything but SDcard and OTG
Install pre rooted ROM
Then Install RICDefieat.zip, byeselinux_flashable.zip, and BusyBox-v1.24.1-Stericson.zip
Power off the phone.
Open Flashtool
Load ftf of .570 and check the Exclude System box and flash the phone
Install TWRP using Z3C_MM_TWRP_Recovery_V2_By_Serajr
And that should be it.
Managed to get everything working bar the TWRP but I think that was my fault.
A download file of everything you need bar the ROM.
Buleste said:
We have progress of sorts.
With prf creator add superSU and create the prerooted ROM.
In TWRP Wipe everything but SDcard and OTG
Install pre rooted ROM
Then Install RICDefieat.zip, byeselinux_flashable.zip, and BusyBox-v1.24.1-Stericson.zip
Power off the phone.
Open Flashtool
Load ftf of .570 and check the Exclude System box and flash the phone
Install TWRP using Z3C_MM_TWRP_Recovery_V2_By_Serajr
And that should be it.
Managed to get everything working bar the TWRP but I think that was my fault.
A download file of everything you need bar the ROM.
Click to expand...
Click to collapse
Worked?
marlontravagli said:
Worked?
Click to expand...
Click to collapse
It seems to be working for me at the moment. Even TWRP.
Edit: TWRP is unstable and sometimes becomes unavailable . If that happens just find SGP621-RICDefeat.zip to enable R/W again and reinstall.
Buleste said:
We have progress of sorts.
With prf creator add superSU and create the prerooted ROM.
In TWRP Wipe everything but SDcard and OTG
Install pre rooted ROM
Then Install RICDefieat.zip, byeselinux_flashable.zip, and BusyBox-v1.24.1-Stericson.zip
Power off the phone.
Open Flashtool
Load ftf of .570 and check the Exclude System box and flash the phone
Install TWRP using Z3C_MM_TWRP_Recovery_V2_By_Serajr
And that should be it.
Managed to get everything working bar the TWRP but I think that was my fault.
A download file of everything you need bar the ROM.
Click to expand...
Click to collapse
ok...this sims to be right, thanks
superpipo said:
ok...this sims to be right, thanks
Click to expand...
Click to collapse
It seems that updating busybox to 1.24.1 stericson stops R/W permissions and the ability to access TWRP however it is easily fixed.
INSTALL TWRP AND ROOT LENOVO P1M
Check this first.
a) Take backup of your important data at safe place.
b) Device must adequately charged.
c) Install USB drivers (MTK USB ALL + MTK VCOM DRIVER) to your PC. (For Windows) (Extract the driver zip and read the ReadMe.txt to install Usb Drivers)
Install TWRP
Follow the steps below.
Note : Use only TWRP 3 if your device is New Version or else your device will face some problem.
1) Download Sp Flash Tool and TWRP3 then Extract the Flash Tool & TWRP. – Then open " flash_tool.exe ".
2) Select " MT6735M_Android_scatter.txt ". It will locate in TWRP 3 folder.
3) Click Options on the top left side of the Flash Tool then check Download and make sure both of them are checked.
4) Select the " Download Only " to flash recovery.
5) Now just click on checkbox recovery and browse to the extracted files and locate " recovery.img ".
6) Turn off your Lenovo Vibe P1m
7) Click the big Download button on top right and connect the phone with usb cable in switch off condition.
8) Now you will see the red stripe showing download percentage.
9) Your phone is successfully installed TWRP now.
Steps to enter Recovery mode in Lenovo VIBE P1m :
1) Press and hold the Volume Down Button + Power Button.
2) When you see the Boot Screen, Release the Buttons.
3) Select Recovery mode using Volume Down.
4) Press Volume Up to Enter Recovery mode.
Note : When you flash recovery, do not switch on the device directly or else the recovery will replace by stock recovery.
Now TWRP recovery is installed on your Lenovo Vibe P1m.
Root Lenovo Vibe P1M
After installing TWRP on Lenovo Vibe P1M, follow the given steps to root it.
1) Download SuperSU from here.
2) Place the downloaded SuperSu zip in your external SD card.
3) Boot into Recovery Mode.
4) Click the Install menu on TWRP.
5) Browse the SuperSu zip you've downloaded and install it.
6) After SuperSu zip is successfully installed, Reboot your device.
7) Your Device is Rooted now.
Warning: I am not responsible if anything goes wrong, bricked device.
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Sorry for the late reply... i hope you've fixed it now..
Vlk Is My Name said:
Sorry for the late reply... i hope you've fixed it now..
Click to expand...
Click to collapse
Yes bro...i try another version of twrp & its work for me
subhyendu said:
Yes bro...i try another version of twrp & its work for me
Click to expand...
Click to collapse
Twrp 3.1.0 is now available...
Vlk Is My Name said:
Twrp 3.1.0 is now available...
Click to expand...
Click to collapse
How to update bro..
subhyendu said:
How to update bro..
Click to expand...
Click to collapse
Download the update and install through the previous twrp or flashify or sp flash tool or adb fastbooot, etc
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Same problem here!! ?? (Not fixed yet)?
Rocker223 said:
Same problem here!! ?? (Not fixed yet)?
Click to expand...
Click to collapse
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
subhyendu said:
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
Click to expand...
Click to collapse
By the way, I had already rooted it!! And now somehow I got it fixed!
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
SHUBHAM 13 said:
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
Click to expand...
Click to collapse
sorry for the late reply.. no need to unlock bootloader.. you can just flash TWRP via SP Flash tool.
I can't find the usb driver for windows 10.Can any one give the link?
how to update my twrp
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
hendra.dunk said:
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
Click to expand...
Click to collapse
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Vickyvignesh said:
I can't find the usb driver for windows 10.Can any one give the link?
Click to expand...
Click to collapse
yeahhh... me too... :crying: that's why I dual boot with win 7
Vlk Is My Name said:
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Click to expand...
Click to collapse
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
hendra.dunk said:
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
Click to expand...
Click to collapse
that may be due to the incompatible of updater script and twrp
Success!
Successfully booting into TWRP using this method. Thanks. My firmware is S040 (year 2017).
Dude, can you reupload the TWRP3 file from google drive? It got deleted. THANKS!