Hello,
I have a bricked Zte Nubia Z5s. I'm trying to unbrick it with QPST. But after installing all the drivers, the PC (Windows 7 Ultimate 64-bit) is still unable to detect the device as QHSUSB Dload or USB Diagnostics port or anything like that with a COM port. It detects it as USB Input Device. I have attached photos of how the device looks like when connected and of the drivers that I have installed.
Will anyone please help me ?
And there was no separate thread for the Nubia Z5s so I had to post here.
Related
hi guys,
I've Lenovo TAB A5500-HV i used MtkDroidTools to create backup which located in my PC, and tried to install the Offical ROM A5500HV_A442_000_024_141007_ROW using SP Flash Tool v5.1352.01 using the option Download, after it starts in about a second the windows - windows 8.1 x64 - just restarted and since then the tablet won't start neither normally nor in recovery and when it get connected to PC the windows says Unknown USB Device (Device Descriptor Request Failed) and no the Mediatek DA and Mediatek Preloader don't get recognized at all in the Device manager.
i know it's totally dead and i searched for long time on the internet with no luck.
PS: i say the device is MT6582 but Lenovo says it's 8382 and in the droid tools it says 8382 is a fake so i don't what it matter
thanks.
First, sorry for my bad english.
hello friend, i have tablet called ADVAN VANDROID T1S MTK6589. i was flash wrong firmware version, and now my tablet is completely dead. no logo, no vibrate.
i trying to flash again for correct firmware, spflashtoll wont recognized it.
computer detect my tablet as "Mediatek USB port" not "USB VCOM ........."
how to change mediatek usb port to usb vcom port? i think this is the problem.
what i try is.
install official driver -- not work
try find meta mode driver -- not work
i draining out my batrei then try to connect to pc again -- still detect as mediatek usb port, not vcom
please give me advice, how i can revive my tablet.
thanks
Hi all!
I've just bricked my ZTE KIS 3 (yes, I still have this old phone.. ). I read many topics in the Internet about bricked phones, but I can't unbrick my device. I just dont know how to do it. ;(
So... When I'm plug in my device to PC then Windows sees in Device manager qhsusb_bulk. I've installed drivers and now I see HS-USB qdloader 9008, so it is okay. QPST can connect with phone via COM3 and reports about device is in download mode so it is good too. And now is the question what I can do next?
Open_C upgrade program is not working. ZTE flash tool is not working too. Only QPST is connecting with my device.
Any one can help me and tell step by step what I should to do?
I'm using Win10 but i have PC with Windows XP, where QPST is working fine.
Regards!
Adam
im trying to flash the ROM on my huawei p7 clone using sp tool, but when i connect the phone, pc doesn't recognized it at all, is unknown device on device manager, i already installed the vcom and preloader drivers via add legacy hardware, but then unknown device still there, tried meta mode and no sucess, help please
Recently, I got a Zenfone 5 that stucked at Intel Logo. I tried to unbrick using XFSTK method but having trouble on detecting the phone. Everytime I connect to the PC, Windows will display USB has malfunctioned and Device Manager will only shows Intel Soc driver, the one which supposed to be Cloverviewplus is not visible and I got a USB device descriptor request failed when connected to phone. I tried to connect other Zenfone 5 and the PC was able to detect it (displaying both Intel and Clover driver) which make me wonder what problem the phone causing? Appreciated any help and suggestions from all of you, thanks!