[Q&A] [APP][2.2+][ROOT][WiFi] Reaver-GUI for Android - Android Q&A, Help & Troubleshooting

Q&A for [APP][2.2+][ROOT][WiFi] Reaver-GUI for Android
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [APP][2.2+][ROOT][WiFi] Reaver-GUI for Android. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

bcmon not insalled
Good day sir(s)
i cant install bcmon it says app not installed
my phone is asus zenfone 4 A400CG
help :crying: :crying: :crying:

It is compatible with galaxy s5?
Sent from my SM-G900F using XDA Free mobile app

please help me
i am open this and start rfa and enable monitor mode,
one error is syntax for scipt send me scipt use android device is 4.2.2 xolo q700

bcmon problame
i have same problame for bcmon
firmware model :not detected
installed tools verion :0
installed fw version :0
i m using xperia l
with lolipop 5.0.2 cyanogen 12

i9100 CM12 RFA BCMON
Hello,
I have installed today Cyanogen Mod 12.1-20150423 to my Samsung Galaxy S2 phone. I would like to try RFA, so I installed bcmon. Mostly it crashes on start up. When not it says "monitor mode enable - Failed" when tapped on Enable monitor mode. RFA won't start an attack. It says "Enabled monitor-mode succesfully on", but that's all ... Nothing else happens ...
Any advice will be appriciated. Thanks

RFA on CM12
Hi there, yesterday I was trying to get it running whole day .. Without result ...
Well, so I rolled back to CM10.1.3 (i am on SGS2 i9100) and it goes without any problem. (Technically) Even the system is stable and running withou any problem.
I am just stuck on "Detected AP rate limiting, waiting 60 secs..." after starting an attack. Do you guys have any solution for this ? I already tried to increase timeouts, but that did not help.
Thanks in advance for any advice

I get a libpcap .so.1 error, dont have a bcmon device

Why I got this message?

gusky651 said:
I get a libpcap .so.1 error, dont have a bcmon device
Click to expand...
Click to collapse
can u upload libpcap.so library file here..

Hey , i downloaded rfa and bcmon , but it shows :
firmware model is not detected, install tools version:0; installed fw version:0
Nothing works , settings doesnt open and if i click on status , it crashes
Sent from my Micromax AQ4501 using XDA Free mobile app
--------------

kyzinet said:
Hi there, yesterday I was trying to get it running whole day .. Without result ...
Well, so I rolled back to CM10.1.3 (i am on SGS2 i9100) and it goes without any problem. (Technically) Even the system is stable and running withou any problem.
I am just stuck on "Detected AP rate limiting, waiting 60 secs..." after starting an attack. Do you guys have any solution for this ? I already tried to increase timeouts, but that did not help.
Thanks in advance for any advice
Click to expand...
Click to collapse
You did everything right, it’s just the AP which is protected against this kind of attack. Just find another one to test.

start up script for reaver
I been having a problem with the start script I put it in my com.bcom.bcom/files folder but every time I try to use the activation script it says no such file exist and I can't open monitor mode I have a galaxy s5 any help would be great thank you

I use script, my phone htc one e8 chipset snapdragon 801

There is an error
Firmware model not detected
Installed tools version 0
Installed fw version 0
I am using xiaomi redmi 1s help me

Bro agr mera wifi kisi se connect h to mai uska password dekh skta hu bt usne change kr diya to kya koi trick h pta krne ki?????
Plz telll

Does it really work on lollipop...?
If not any other tools that can replace it..i mean for bcmon

Does Xperia Z3 has this bcm4329/4330 wifi chipset?
Wysłane z mojego D6603 przy użyciu Tapatalka

[quote name="SOEDI" post=45882817]
<br />
<b>Reaver for Android v1.30</b><br />
<i>Reaver-WPS GUI for rooted devices with bcm4329/4330 wifi chipset or working external wifi card.</i><br />
<br />
<br />
<br />
<b>INFO:</b><br />
Reaver for Android, short RfA, is a simple-to-use Reaver-GUI for Android devices with monitor-mode support.<br />
It has some very cool features:<br />
<br />
<b><br />
* Detects automatically WPS-enabled routers.<br />
* All Reaver-Settings are accessible from a simple-to-use GUI.<br />
* Activates and deactivates Monitor-Mode automatically when needed.<br />
* Provides a simple way to connect when Reaver finds the WPA-Key.<br />
* External script support<br />
</b><br />
<br />
<b>Project status: PRE-FINAL</b><blockquote><i>What does this mean?</i><br />
There are some features which are not implemented yet.<br />
Developement will continue very soon.</blockquote><br />
<b>Installation</b><br />
<br />
1. Download/install bcmon.apk from HERE and RfA.apk from the bottom of this post. RfA may also download bcmon automatically.<br />
2. Run bcmon, if it crashes try a second time.<br />
3. If all runs fine, start RfA. If not, your device may be not bcmon compatible. Please see second post.<br />
4. After selecting an WPS-enabled router, click on "Test Monitor-Mode".<br />
5. Now you can use RfA, don't uninstall bcmon.<br />
<br />
Steps 1 - 4 are only for the installation, they don't have to be repeated once done.<br />
<br />
<br />
<b>FAQ:</b><br />
<blockquote><b><i>What is this awesome app actually usefull for?</i></b><br />
Well, RfA is able to unveil the actual WPA(2)-Key of many routers within 2 - 10 hours.<br />
<br />
<b><i>WHAT?! I though WPA(2) is safe?</i></b><br />
It used to be, but then many router models got WiFi Protected Setup, short WPS, implemeted, which is pretty vulnerable. (Details)<br />
Basically it's a Brute-Force attack with Reaver against a 8 digit pin with 10^4 + 10^3 possibilities.<br />
<br />
<b><i>What is Reaver?</i></b><br />
Reaver-WPS is a pentesting tool developed by Tactical Network Solutions.<br />
It attacks WPS-enabled routers and after the WPS-Pin is cracked, it retrieves the actual WPA-key.<br />
Reaver provides only a terminal interface, which is ok for notebooks etc., however it's a pain on Android devices.<br />
Because of this I developed RfA.<br />
<br />
<b><i>Doesn't Reaver requires monitor-mode and so can't work on Android?</i></b><br />
Yes, Reaver needs monitor-mode, but thanks to bcmon (or external wifi cards) some Android devices are now monitor-mode capable.</blockquote><br />
<b>bcmon compatibility</b><blockquote><b>Developed and tested on:</b> Nexus 7 2012 (Stock 4.3)<br />
RfA *should* work on all devices with bcmon support (Broadcom bcm4329/bcm4330 chipsets)<br />
Simply try by installing bcmon. Don't worry, if something goes wrong a simple reboot should fix everything.<br />
For external wifi cards please see second post.<br />
<br />
<b>Tested & works on:</b><br />
Nexus 7 2012 (Stock 4.3, Cyanogen 9)<br />
Huawei Honour (Cyanogen Mod based ROM)<br />
<br />
<b>bcmon does NOT work on:</b><br />
Samsung Galaxy S3/4/5<br />
HTC One<br />
LG G2<br />
Nexus 4/5<br />
Nexus 7 (2013)<br />
</blockquote><b>Credits & used tools:</b><br />
<blockquote><b>Monitor-Mode over bcmon.apk:</b><br />
Omri Ildis, Ruby Feinstein & Yuval Ofir<br />
See: bcmon.blogspot.com<br />
<br />
<b>Reaver-WPS:</b><br />
Tactical Network Solutions<br />
See: code.google.com/p/reaver-wps/</blockquote><b>Disclaimer</b><br />
<blockquote><b><font color="Red">Attention: Hacking of networks is illegal without having the permission of the owner! The developer is not responsible for any damage etc. this app could cause.<br />
This software is only intended to show a big security hole, not to be able to surf in the neighbours Wifi</font></b></blockquote><b><u>XDAevDB Information</u></b><br />
<b>Reaver-GUI for Android, App for all devices (see above for details)</b><br />
<br />
<b><u>Contributors</u></b><br />
SOEDI, bcmon team & Tactical Network Solutions<br />
<br />
<b><u>Version Information</u></b><br />
<b>Status:</b> Stable<br />
<b>Current Stable Version:</b> 1.30<br />
<b>Stable Release Date:</b> 2014-07-01<br />
<b>Beta Release Date:</b> 2013-11-04<br />
<br />
<b>Created</b> 2013-09-24<br />
<b>Last Updated</b> 2014-09-27[/QUOTE]<br />
Good News<br />
Guys I have found pixiwps Good binary for android . You have to copy the binary and past in data/data/com.bcmom.bcmon/files/tools the link is<br />
http://wpspin.blogspot.in/?m=1<br />
I was unable to download cuz of ads if some one could dowanload and put the file it will be really a great help for me from you tnx in advance<br />
<br />
Sent from my GT-I9070 using XDA-Developers mobile app<br />
---------------<br />
<b>Admin Note: this thread has a dedicated questions and answers section which you can access here -->.</b>
Sent from my GT-I9070 using XDA-Developers mobile app

Installed tools through bcmon.
(Succeed)
ENABLE MONITOR MODE
(FAILED)
WENT TO REAVER AND UNCHECKED USE BCMON
Made scripts /selected and saved them
(Start monitor mode from reaver)
Sorry activate.sh [start script] not found.
Checked use bcmon again..
ENABLE MONITOR MODE FROM REAVER.
SUCCEEDED
MONITOR MODE ENABLED
START ATTACK
STARTING...
SWITCHING WILAN0 TO CHANNEL 1
STUCK 4 TWO HOURS
 @SOEDI
Any solution, sir?

Related

[Q&A] Need help with Admob

Hi,
I have been a part of XDA developers for a long time. I dont post (coz I dont know as much as ou guys). But I visit almost everyday.
I decided to make an App for Android and I have very close to 0 knowledge in programming. I made the app and it works However, I have incorporated the Admob SDK and done exactly like all the tutorials say but the ads dont show up on the device. It shows perfectly on the emulator through...
My "main.xml"
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:ads="http://schemas.android.com/apk/lib/com.google.ads"
androidrientation="vertical"
android:layout_width="fill_parent"
android:layout_height="fill_parent">
<com.google.ads.AdView android:id="@+id/adView"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
ads:adUnitId="<I have put my Publisher ID <-- I hope that is correct"
ads:adSize="BANNER"
ads:loadAdOnCreate="true"/>
my Main Activily has the following
AdView adv = (AdView)findViewById(R.id.adView);
AdRequest re = new AdRequest();
adv.loadAd(re);
My Manifest has the following
<activity android:name="com.google.ads.AdActivity"
android:configChanges="keyboard|keyboardHidden|orientation|screenLayout|uiMode|screenSize|smallestScreenSize"/>
<uses-sdk android:minSdkVersion="8" />
<uses-permission android:name="android.permission.INTERNET" />
<uses-permission android:name="android.permission.ACCESS_NETWORK_STATE"/>
my Project Properties has this
target=android-15
I have added external JAR GoogleAdMobAdsSdk-6.1.0.jar into the LIbrary.
When i run it, i cant see the ad on my device but I can see it if I run it on the emumlator.
https://play.google.com/store/apps/...sMSwxLDEsImNvbS5vdXRnb2luZy5kZXRlY3RjYWxscyJd
That's my app. ( If someone helps me solve this, I will give my app ADD FREE to XDA Developers)
Thanks
If it works on the emulator you have done it correctly. I think it is a "lack of inventory" problem, so you only have to wait, usually this problem disappears when the number of installations increase.
Thank you so much. I can see in AdMob that the number of Requests is increasing so...

Developing XPERIA S / T for X10 Mini pro with HW Support!

Hi Im developing a xPeria S Keyboard with hw Support but i have Problems to convert it what i have found are follow ´things
uploaded one developer kit for all that want to help me.
the Rom that the xperia S Keyboard works and we have to fix the layouts only i have uploaded here Achotjan_Semc_Debrand_Engine_v30_Beta_04_U20i.zip
this includes the Keyboard of Achotjan_Semc_Debrand_Engine_v30_Beta_04_U20i -> download here -> http://rapidshare.com/files/1307696133/keyboards.zip
-> it has the properties : - If you install it on minicm 10 it crashes ( xperia process has been finish Or so)-
- you can Setup the xperia s Keyboard if you set another Keyboard as Default...
- you notice it if it will be Switches to be in Hardware mode -> it don't work in minicm10 at the Moment if somone have time you can test it on minicm7 and write nme if it is working there
they are the orgiginal files in it without changes
Semc_Debrand_Engine_6.0.B.0.743_U20i -> http://rapidshare.com/files/1821291341/developer_patchsemc_6.0b.zip​
xperia S Keyboard and Hardware use . im understanding how it works basicalyy but im not a expert in it later i will send you some Information what i find
but what i find is follow:
the xperia mini pro (sk17i) has a similiar structur with the x10mini pro in the things, Keyboard layout, chars and so on. on my xperia s Keyboard there isn't the structure avable so the Keyboard can't use it. i belive the key for sucseess is in the
Folders
/System/Usr/Keyboard-config ------------------------>
/System/USR/Keychars - ------------------------->
/System/USR/Keylayout ------------------------> similiar to minicm7 xperia Keyboard
System/USR/srec
/System/USr/textinput
/System/USR/XT9
Note the files : qwerty.kcm.bin; mimmi_keypad.kcm.bin; or z8d files we can open with hexeditor
so If we can adapt to our x10mini pro we should have an xperia S- Keyboard that the Hardware Keyboard should work with it and we have a update to our minicm7 Keyboard .. I don't know how but if you find a way it is a Milestone in our x10mini pro . hope everyone can help me
Developer_Package_with_xperia_sabithwsupport Note to edit some file you should use Notepad++ and a hexeditor --> i don't have any knowledge about hex files
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i have tryied follow things
http://forum.xda-developers.com/showthread.php?t=2102979
http://forum.xda-developers.com/showthread.php?t=1547404
http://forum.xda-developers.com/showthread.php?p=18569390
http://forum.xda-developers.com/showthread.php?t=1670352
http://forum.xda-developers.com/showthread.php?t=2155803
this are my files with Keyboard of both and fixes
http://forum.xda-developers.com/showthread.php?t=2094572
so what i have found is follow on xperia S i have found a way to be activate the blue key for it. But without ÄÜÖ the rest are avable.
if i have something Change in keychars and keylayout the minicm7 use the left blue key for both.
In one configuration the xperia s try to load the Hardware Driver with sim key and so on but it goes back to the original state. In the Framework Folder i found in one xperia s interessting things suqushashinput.jar ----> (ist a file of our minicm7 too) and uxprexe it is the file of the xperia s Keyboard. i don't know but im belive this are the user Interface of Hardware using of the Keyboard.....
In the Folder Keyboard-config you find 11 files that are similar to minicm7 Keyboard. only the language files are a bit otherwise of the Name in our phone. I believe if we use the rigth files of booth and create it that the xperia s Keyboards loads the minicm7 Interface it should be working or if the xperia s inteface is loading with modified files to our phonen i hope anyone can help me
- apk Manager: apl managere
hi bro
yesterday i tested latest nAa's nightly with latest nAa(jb)04 kernel...hwkey works fine with my keychars but there's one problem
L key seems like works as RETURN key
When I press L key phone comes back to homescreen.
Do you now why? Thanks
yes
Chuck95 said:
hi bro
yesterday i tested latest nAa's nightly with latest nAa(jb)04 kernel...hwkey works fine with my keychars but there's one problem
L key seems like works as RETURN key
When I press L key phone comes back to homescreen.
Do you now why? Thanks
Click to expand...
Click to collapse
It is always a kernel bug you can test it . go to cwm -> advance -> Key test
now you ssee on some keys are two keys
the Problem isn't fixed correctly
R: Developing XPERIA S / T for X10 Mini pro with HW Support!
Thank you very much
Sent from my U20i using xda app-developers app
---------- Post added at 10:29 PM ---------- Previous post was at 10:16 PM ----------
Hiii...I noticed one thing
Before replace keychars when I typed with hw keyboard there were these problems:
-when I type i it shows ''ijj'' and same problem with other buttons but now that i replace keychars there isn't no more this problem so i think that problem with L key is in ROM not in KERNEL because if i fixed it i can fix L key too...I will let you know
Sent from my U20i using xda app-developers app
---------- Post added at 10:32 PM ---------- Previous post was at 10:29 PM ----------
If i fix it you can add my usr folder in your new project
Sent from my U20i using xda app-developers app
Nice work, released that
Hi i tested rom changing usr folder...I replaced it with older but problem is still there so we have to wait a new kernel
It would be nice if this would work :good:
Achotjan gave up to try and make it work in Semc Debrand Engine.
There is a lot of discussion about the XPERIA S HW-keyboard-problem in that thread, also alot of good sugestions and info. It's a long thread, but worth looking throug for some inspiration :silly:
Also the sk17i-HW-keyboard got more keys (extra row to the right) than U20i-HW-keyboard. This gave alot of headache for us all, LOL
Emperor.dk said:
It would be nice if this would work :good:
Achotjan gave up to try and make it work in Semc Debrand Engine.
There is a lot of discussion about the XPERIA S HW-keyboard-problem in that thread, also alot of good sugestions and info. It's a long thread, but worth looking throug for some inspiration :silly:
Also the sk17i-HW-keyboard got more keys (extra row to the right) than U20i-HW-keyboard. This gave alot of headache for us all, LOL
Click to expand...
Click to collapse
im knowing up that in one configuration i have a similar Hardware layout configuration of minicm7 Keyboard if im using Default Input and in xperia s i have the qwertz ofthe config of minicm7 nbut without sym key and later i have a configuration with working blue keys without symkey and qwerz but with no function it on the minicm7 arg
allesand said:
im knowing up that in one configuration i have a similar Hardware layout configuration of minicm7 Keyboard if im using Default Input and in xperia s i have the qwertz ofthe config of minicm7 nbut without sym key and later i have a configuration with working blue keys without symkey and qwerz but with no function it on the minicm7 arg
Click to expand...
Click to collapse
this is my configuraton, working fine for me, hard keys and blue keys (Achotjan rom)
HTML:
<?xml version="1.0" encoding="utf-8"?>
<Keyboard xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../../scancode_mapping.xsd">
<!-- First row -->
<Row>
<MappingKey scancode="16" id="C1.1" />
<MappingKey scancode="17" id="C1.2" />
<MappingKey scancode="18" id="C1.3" />
<MappingKey scancode="19" id="C1.4" />
<MappingKey scancode="20" id="C1.5" />
<MappingKey scancode="21" id="C1.6" />
<MappingKey scancode="22" id="C1.7" />
<MappingKey scancode="23" id="C1.8" />
<MappingKey scancode="24" id="C1.9" />
<MappingKey scancode="25" id="C1.10" />
<MappingMetaKey scancode="14" id="META_DELETE" />
</Row>
<!-- Second row -->
<Row>
<MappingKey scancode="30" id="C2.1" />
<MappingKey scancode="31" id="C2.2" />
<MappingKey scancode="32" id="C2.3" />
<MappingKey scancode="33" id="C2.4" />
<MappingKey scancode="34" id="C2.5" />
<MappingKey scancode="35" id="C2.6" />
<MappingKey scancode="36" id="C2.7" />
<MappingKey scancode="37" id="C2.8" />
<MappingKey scancode="38" id="C2.9" />
<MappingKey scancode="40" id="C2.10" />
<MappingMetaKey scancode="28" id="META_ENTER" />
</Row>
<!-- Third row -->
<Row>
<MappingMetaKey scancode="42" id="META_SHIFT_LEFT" />
<MappingKey scancode="44" id="C3.1" />
<MappingKey scancode="45" id="C3.2" />
<MappingKey scancode="46" id="C3.3" />
<MappingKey scancode="47" id="C3.4" />
<MappingKey scancode="48" id="C3.5" />
<MappingKey scancode="49" id="C3.6" />
<MappingKey scancode="50" id="C3.7" />
<MappingKey scancode="214" id="C3.8" />
<MappingMetaKey scancode="103" id="META_DPAD_UP" />
<MappingMetaKey scancode="368" id="META_LANGUAGE" />
</Row>
<!-- Fourth row -->
<Row>
<MappingMetaKey scancode="56" id="META_ALT_LEFT" />
<MappingMetaKey scancode="216" id="META_SYMBOL" />
<MappingKey scancode="26" id="C4.1" />
<MappingKey scancode="51" id="C4.2" />
<MappingMetaKey scancode="57" id="META_SPACE" />
<MappingKey scancode="52" id="C4.4" />
<MappingMetaKey scancode="105" id="META_DPAD_LEFT" />
<MappingMetaKey scancode="108" id="META_DPAD_DOWN" />
<MappingMetaKey scancode="106" id="META_DPAD_RIGHT" />
</Row>
<!-- Back key -->
<Row>
<MappingMetaKey scancode="158" id="META_BACK" />
</Row>
</Keyboard>
chilakil said:
this is my configuraton, working fine for me, hard keys and blue keys (Achotjan rom)
HTML:
<?xml version="1.0" encoding="utf-8"?>
<Keyboard xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../../scancode_mapping.xsd">
<!-- First row -->
<Row>
<MappingKey scancode="16" id="C1.1" />
<MappingKey scancode="17" id="C1.2" />
<MappingKey scancode="18" id="C1.3" />
<MappingKey scancode="19" id="C1.4" />
<MappingKey scancode="20" id="C1.5" />
<MappingKey scancode="21" id="C1.6" />
<MappingKey scancode="22" id="C1.7" />
<MappingKey scancode="23" id="C1.8" />
<MappingKey scancode="24" id="C1.9" />
<MappingKey scancode="25" id="C1.10" />
<MappingMetaKey scancode="14" id="META_DELETE" />
</Row>
<!-- Second row -->
<Row>
<MappingKey scancode="30" id="C2.1" />
<MappingKey scancode="31" id="C2.2" />
<MappingKey scancode="32" id="C2.3" />
<MappingKey scancode="33" id="C2.4" />
<MappingKey scancode="34" id="C2.5" />
<MappingKey scancode="35" id="C2.6" />
<MappingKey scancode="36" id="C2.7" />
<MappingKey scancode="37" id="C2.8" />
<MappingKey scancode="38" id="C2.9" />
<MappingKey scancode="40" id="C2.10" />
<MappingMetaKey scancode="28" id="META_ENTER" />
</Row>
<!-- Third row -->
<Row>
<MappingMetaKey scancode="42" id="META_SHIFT_LEFT" />
<MappingKey scancode="44" id="C3.1" />
<MappingKey scancode="45" id="C3.2" />
<MappingKey scancode="46" id="C3.3" />
<MappingKey scancode="47" id="C3.4" />
<MappingKey scancode="48" id="C3.5" />
<MappingKey scancode="49" id="C3.6" />
<MappingKey scancode="50" id="C3.7" />
<MappingKey scancode="214" id="C3.8" />
<MappingMetaKey scancode="103" id="META_DPAD_UP" />
<MappingMetaKey scancode="368" id="META_LANGUAGE" />
</Row>
<!-- Fourth row -->
<Row>
<MappingMetaKey scancode="56" id="META_ALT_LEFT" />
<MappingMetaKey scancode="216" id="META_SYMBOL" />
<MappingKey scancode="26" id="C4.1" />
<MappingKey scancode="51" id="C4.2" />
<MappingMetaKey scancode="57" id="META_SPACE" />
<MappingKey scancode="52" id="C4.4" />
<MappingMetaKey scancode="105" id="META_DPAD_LEFT" />
<MappingMetaKey scancode="108" id="META_DPAD_DOWN" />
<MappingMetaKey scancode="106" id="META_DPAD_RIGHT" />
</Row>
<!-- Back key -->
<Row>
<MappingMetaKey scancode="158" id="META_BACK" />
</Row>
</Keyboard>
Click to expand...
Click to collapse
nice in whitch of the files i can find it?
chilakil said:
this is my configuraton, working fine for me, hard keys and blue keys (Achotjan rom)
HTML:
...
<MappingMetaKey scancode="57" id="META_SPACE" />
...
Click to expand...
Click to collapse
I see you have only one MetaKey for space. Do you get a "space" pressing both edges of the key?
Doing a key-test in CWM returns two scancodes for right and left edge.
See post # 405 (at the buttom of the post i list all the scankeys) on this page: http://forum.xda-developers.com/showthread.php?t=1504637&page=41
allesand said:
nice in whitch of the files i can find it?
Click to expand...
Click to collapse
system/usr/keyboard-config/scancode_mapping,xml
---------- Post added at 10:37 AM ---------- Previous post was at 09:51 AM ----------
Emperor.dk said:
I see you have only one MetaKey for space. Do you get a "space" pressing both edges of the key?
Doing a key-test in CWM returns two scancodes for right and left edge.
See post # 405 (at the buttom of the post i list all the scankeys) on this page: http://forum.xda-developers.com/showthread.php?t=1504637&page=41
Click to expand...
Click to collapse
Extra key is not necessary because the navigation keys are functional (right to left), but you not will get extra space by pressing the navigation key to the right if that's what you mean.
Emperor.dk said:
I see you have only one MetaKey for space. Do you get a "space" pressing both edges of the key?
Doing a key-test in CWM returns two scancodes for right and left edge.
See post # 405 (at the buttom of the post i list all the scankeys) on this page: http://forum.xda-developers.com/showthread.php?t=1504637&page=41
Click to expand...
Click to collapse
ok so what do you mean it wit one MetaKey for space?
i don't understand it
allesand said:
ok so what do you mean it wit one MetaKey for space?
i don't understand it
Click to expand...
Click to collapse
the space-bar got two buttons. One under B and one under M.
they could actually be maped into two different functions like space for the one under B and TAB for the one under M. I always wondered why we didn't had a TAB key. i will try to make it for the learning experience.
but read in the thread i linked to get some idears to make XPERIA S keyboard work on our mimmi
Emperor.dk said:
the space-bar got two buttons. One under B and one under M.
they could actually be maped into two different functions like space for the one under B and TAB for the one under M. I always wondered why we didn't had a TAB key. i will try to make it for the learning experience.
but read in the thread i linked to get some idears to make XPERIA S keyboard work on our mimmi
Click to expand...
Click to collapse
http://forum.xda-developers.com/show...504637&page=41 you mean this thread
allesand said:
http://forum.xda-developers.com/show...504637&page=41 you mean this thread
Click to expand...
Click to collapse
Yes
http://forum.xda-developers.com/showthread.php?t=1504637&page=41
i tried follow
Emperor.dk said:
Yes
http://forum.xda-developers.com/showthread.php?t=1504637&page=41
Click to expand...
Click to collapse
im downloading the Rom of azopikolo or what his Name is copy the Keyboard files Change the configure files and make a new developer kit . so im testing it if im think this is great i will update the files to newer one . so i m hope this is the rigth way to make a keyfix for our phone so we should have an xperia s Keyboard with working keys or isn't it so ..?
so there are many Versions of it. Which Rom was the best Rom to can make the fix ? there are many Versions of Semc Debrand Engine | 3.0_Final | FreeXperia Project | 6.0.B.0.743 | RELEASED !
should work
have tested old Rom quickly i see that this has to work on our phone
im testing the old Rom of achioat or so
i have founding an bug that has some Versions of the android Systems of nAas on 3.05 and 4.0 that nAa has been fixed with the symkey
so im think we Need this files of the old Rom and has it to update it and then we Need a System like it is existing for xperia s or the System works to don't know but im thinnking this are good news
the existing Keyboard layout zip files or integratet in my fix should be work soon with xperia S HW
tested with minicm7rom of a_
allesand said:
the existing Keyboard layout zip files or integratet in my fix should be work soon with xperia S HW
tested with minicm7rom of a_
Click to expand...
Click to collapse
I told you I've been using for several months without problems :good:

Can't debug [INSTALL_FAILED_INVALID_APK]

I have a sola, running the JB port from munjeni.
I'm devlopping an app and I get
Failure [INSTALL_FAILED_INVALID_APK] when trying to debug on the phone. USB debug activated of course.
I see this message as well DeviceMonitor: Adb rejected connection to client '21134': closed
My Nexus 7 when i did that, aksed me to autorize my PC. It seem the sola just deny acces ?
Is that some problem with the JB port ? Common problem with the sola ?? Invalid apk, not really a usefull message.
I'm using intelliJ, and here is the manifest, just in case :
<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
package="com.MyLauncher"
android:versionCode="1"
android:versionName="1.0">
<uses-sdk android:minSdkVersion="14"/>
<application android:label="@string/app_name" android:icon="@drawable/ic_launcher">
<activity android:name="LauncherScreen" android:theme="@android:style/Theme.Wallpaper.NoTitleBar.Fullscreen">
android:label="@string/app_name">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.HOME" />
<category android:name="android.intent.category.DEFAULT" />
</intent-filter>
</activity>
</application>
</manifest>
I did some test, put akp on SD, install, start -> all OK.
So apk is valid for sure, and compatible. Had to be some securitty thing bloking it.
EowynCarter said:
I did some test, put akp on SD, install, start -> all OK.
So apk is valid for sure, and compatible. Had to be some securitty thing bloking it.
Click to expand...
Click to collapse
Did you solve?
Yes, got myself a nexus 4
Joke aside, look around in the developer setting, at adb and all.
And the max / min sdk version.
You might also want to try adb install name.akp see what happens.
What phone and rom are you using exactly?
EowynCarter said:
Yes, got myself a nexus 4
Joke aside, look around in the developer setting, at adb and all.
And the max / min sdk version.
You might also want to try adb install name.akp see what happens.
What phone and rom are you using exactly?
Click to expand...
Click to collapse
No way....same extact error with adb install.
My phone is a Zopo zp998 with rom of 28/3/2014
Before the rom update it was working fine!

Unstable phone

Hi,
My phone is currently unstable. It is rebooting pretty often with no obvious trigger. Also having reboots which return to the initial Google-setup. My settings.apk disappear yesterday, so I did another clean install. I'm on PAC-Rom at the moment, but was running Markox89's CM11 builds beforehand, and having issues there.
When wiping recently I've been doing a full system/data/cache wipe, as well as wiping cache/dalvik after installation. However I have not been formatting /sdcard/. Could this solve the issue?
Phone: i9300
ROM: PAC-i9300 Latest KK Nightly (20150128)
Kernel: Boeffla Kernel 2.7 NG CM11 Final
Modem: I9300XXUGND1
Bootl: I9300XXUGOA2
The following is a logcat which I started ~15 mins before a reboot occured.
Logcat (adb logcat *:E -v long > errors.log): http://pastebin.com/raw.php?i=1akST61A
PS: I have an exam tomorrow afternoon so I may not get around to too much testing in the next 24 hours.
Any help would be greatly received!
Thanks,
David
Try the freezing thread in general forum, test the memory for bad blocks.
Thanks for the reply,
I was following that process before a few months ago, and it might have improved the phone slightly so I'll keep on it for a bit.
My phone was most stable around a month ago where I had zero reboots in a week or two, but they started to appear again after a while.
It seems to be an error on a2dp, audio. Looks like driver loading failed but I'm no expert.
Sent from a stolen phone!
I've been playing around with a few more roms, both KK and LP but my phone is still getting reboots.
I'm now on PAC rom, the most recent KK nightly (from January '15)
I've started recording catlogs so I can now upload them here for every reboot in case there is something that can be helped.
Log from this morning, with filter set to errors: http://pastebin.com/raw.php?i=PpWqx6Xy
Thanks!
Flash back to stock and start again. If you need help let me know
When I flashed PAC ROM recently I did a full wipe including system and data and internal SD.
Wouldn't going back to stock have no effect?
Unless my modem and/or boot-loader may be causing issues?
Cheers
By going back to stock it resets all of your parameters and kernel, and boot files. This will resolve your issues if there is something wrong with the Bootloader also. I can help you if you need it
Also, I just noticed your running a lollipop Bootloader, with KitKat kernel and system. This could be an issue as well
KaosMaster said:
Also, I just noticed your running a lollipop Bootloader, with KitKat kernel and system. This could be an issue as well
Click to expand...
Click to collapse
Okay sounds like a good idea. I'm confident with adb and odin etc so shouldn't need any particular help.
I'm assuming this guide conforms to the standard approach: http://forum.xda-developers.com/galaxy-s3/general/fix-s3-to-factory-unroot-stock-recovery-t2323847
Cheers
Here are the complete ODIN Service files to restore your International GT-I9300 16GB device to I9300XXUGNJ2_I9300OXXGNJ1-OXX (Open) STOCK:<br />
<br />
CSC-OXX-I9300XXUGNJ2_I9300OXXGNJ1_2793257_REV00_user_low_ship.tar.md5<br />
<br />
https://drive.google.com/file/d/0B4RU_ZH5QUASenlHVlctVEZfUFE/view?usp=sharing<br />
<br />
This is ODIN v.3.10:<br />
https://drive.google.com/file/d/0B4RU_ZH5QUASSWhaMmdiaFJ1Tm8/view?usp=sharing<br />
<br />
This package is straight from Samsung and includes the PIT for partitioning!! <br />
<br />
These files are intended to be used with ODIN ONLY!! If at any time ODIN FAILS, pull battery, re-insert battery, go back to ODIN and try again.<br />
<br />
Download the two items, charge device to 100% battery, Download and install Device drivers from samsung if needed.<br />
<br />
www.samsung.com/support<br />
<br />
Unzip the CSC-i9300****.zip file.<br />
<br />
Unzip and Open "ODIN v.3.10.exe" as an "Administrator" on a Windows PC.<br />
<br />
Click on each of the 4 buttons below and browse to find matching file in extracted image folder:<br />
<br />
BL = BL-****.tar.md5<br />
AP = AP-****.tar.md5<br />
CP = MODEM-****.tar.md5<br />
CSC = CSC-****.tar.md5<br />
<br />
Check the following boxes:<br />
<br />
Auto-Reboot<br />
Re-Partition<br />
F. Reset Time<br />
NAND Erase All<br />
<br />
Put 100% charged device into ODIN Mode, and connect to PC USB with Original Cable.<br />
<br />
Check there two boxes in ODIN:<br />
<br />
Phone Bootloader Update<br />
Clear EFS Partition<br />
<br />
Hit the "Start" button<br />
<br />
Once the Device reboots, perform Two [2] FDR (Factory Data Reset).<br />
<br />
Phone is back to complete stock...

Getting "Your Device isn't supported by Mi Unlock" error while unlocking bootloader

Getting "Your Device isn't supported by Mi Unlock" error while unlocking bootloader
i have unlocked my bootloader officialy and installed cm14.1 rom by abhishek this rom replaced my device's bootloader with cyanogenmod bootloader so afterthat i flashed stock miui 8.0.5 through mi flash tool but now when i try to unlock my bootloader it is giving error "your device isn't supported by mi unlock" also when i checked for unlock permission on official website it is showing "your request has been rejected"
so plz someone explain me what is the actual problem and whats the solution for this
Thank You
maybe you have a vendors rom, use the edl and flashboot method and install a fresh rom and try again
https://www.reddit.com/r/Xiaomi/wiki/miui/flashofficial
fardeenah said:
maybe you have a vendors rom, use the edl and flashboot method and install a fresh rom and try again
@fardeenah i have flashed latest stable rom Miui 8.0.5 by miflash tool but still i am getting mentioned error hope it will have any solution
Click to expand...
Click to collapse
well your request for bootloader unlock has been rejected, can u apply for it again? simply say you want to install rom and that you are a developer, also make sure you are running the developer version of the rom when u try to unlock
Flash fastboot global developer rom through miflash (EDL Mode) it will solve the issue
@fardeenah there is no option to reapply now what should i do
@xelerater01 already flashed global beta rom 6.11.24 by edl still same error is coming
post in this forum
http://en.miui.com/type-64-717.html
if everything fails, create a new account and reapply
and follow this guide
http://en.miui.com/thread-199580-1-1.html
and
http://en.miui.com/thread-200858-1-1.html
good luck.
clear your browser before reapplying or use another browser
Install china fastboot dev rom through edl interface and than use MI Unlock Tool. It will work.
Try unlocking the unofficial way.
I have tha same problem
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Same problem here too. Any solution?
[quote name="abihary" post=69600823]check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.[/QUOTE]<br />
<br />
Wait don't worry I will be uploading the correct files and procedure for doing that.<br />
<br />
The thing is your phone is bricked and nothing to do now right.?<br />
Theres a solution wait... Uploading that<font color="Silver"><br />
<br />
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------<br />
<br />
</font>[quote name="innynizty" post=69429358]Hello all ! Sry for my english but i think you can understand me <br />
<br />
<br />
<br />
The problem is with my phone. :crying:!<br />
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/ <br />
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ? <br />
All I know is I can enable fastboot mode :c <br />
<br />
<br />
Help me please :C [/QUOTE]<br />
<br />
The solution is here:<br />
download the required files from the given link: [50mb]<br />
<br />
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE<br />
<br />
INSTRUCTIONS: [redmi note 3]<br />
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.<br />
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.<br />
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.<br />
<br />
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode. <br />
type in: bcdedit /set testsigning on <br />
hit enter and restart your pc<br />
(this is imp.)<br />
<br />
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.<br />
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.<br />
6. Now go to Unlock folder and run the unlock bootloader.bat file.<br />
your phone will boot into the TWRP recovery mode automatically.<br />
if it opens in chineese you select every tab and find the globe icon. <br />
if the globe icon is found on any of the tab select it and change the language to ENGLISH.<br />
<br />
wipe your system from the wipe tab:<br />
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:<br />
https://download.cyanogenmod.org/get/kenzo-snapshot.zip<br />
and GAPPS:<br />
http://opengapps.org/?api=6.0&variant=mini<br />
do select the arm 64 version and mini one.<br />
<br />
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp. <br />
mount the micro sd card storage.<br />
select the zip file on the micro sd card from the install tab on twrp and flash it.<br />
now go back and flash open gapps zip file.<br />
<br />
now REBOOT to system. everything will work fine....
Sent from my ASUS_T00J using Tapatalk
---------- Post added at 12:01 AM ---------- Previous post was at 12:00 AM ----------
The above is useful try it
Sent from my ASUS_T00J using Tapatalk

Categories

Resources