Q&A for Touchy os for gionee m3 by ravi sharma
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Touchy os for gionee m3 by ravi sharma. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
funloft said:
After following the method up to installing TWRP, How do i know that TWRP is installed and how do i boot into recovery to flash the rom?
Click to expand...
Click to collapse
Very simple install holo reboot. And select boot in recovery.
there is a some bugs but it does not matters. Great ROM bro. But it can't vibrate annd ring at the same time when there are calls, sms ...
hi there
i need a flip cover working rom please any one could provide me
Thanks Ravi for this ROM!
My Data connection (3G) is not working, and I cant find where to edit the APN for my country.
---------- Post added at 08:32 PM ---------- Previous post was at 08:06 PM ----------
Edibulho said:
Thanks Ravi for this ROM!
My Data connection (3G) is not working, and I cant find where to edit the APN for my country.
Click to expand...
Click to collapse
Continuing pressing the "data connection" icon, from the menu bar, doesn't do anything. It dont go to the data connection settings.
Thanks!
Thanks for this ROM, I love it. Runs really smooth. Better than stock rom!!
I have some issues:
Can't change Data Usage Cycle.
"Smart Wake" doesnt work.
HotKnot disappeared.
And the most important:
I can only navigate in 2G (edge).
My model is Studio Energy (D810L): HSDPA 850 / 1900 / 2100
Do you know if this is a personal problem or an issues from the ROM.
Thanks!!!
Related
Q&A for [ROM]IBall Andi 5H MIUI RobCodeMax
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM]IBall Andi 5H MIUI RobCodeMax. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Cool ROM
robcodemax said:
I have taken down the link temporarily as the following bug was noted:
1. Flash Light was not working...
I have resolved the issue and I am re-uploading the ROM now......
NEW LINKS UPLOADED.....YOU CAN DOWNLOAD NOW
Click to expand...
Click to collapse
Installed ur ROM in my Quadro 5H.
Appears to be cool
google framework service not getting installed
Google installer not able to install google framework service.
Hence none of the gapps work.
i think development started for iball andi 5h quadro
good one
---------- Post added at 07:23 PM ---------- Previous post was at 07:10 PM ----------
r u working on another rom??
MIUI
My XDA friends. Can anyone please tell me what version of android is this "MIUI V5".
Actually I don't have much knowledge about ROMs
Jahnu said:
My XDA friends. Can anyone please tell me what version of android is this "MIUI V5".
Actually I don't have much knowledge about ROMs
Click to expand...
Click to collapse
This ROM is based on Jelly Bean 4.2.1
Hi
I am using this Rom in my iBall andi 5h quadro it's nice but I unable to connect usb otg , I tried many otg cable but it doesn't work. Didn't show usb mounting connection. And some time some applications didn't respond. I am new to use custom Rom please help me
[Q&A] [ROM][4.4.2][Fast]Hypermax v9[Slim][Complete S5 Experience][Themed][Fast][OG B
Q&A for [ROM][4.4.2][Fast]Hypermax v9[Slim][Complete S5 Experience][Themed][Fast][OG Battery mod][20 June]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.2][Fast]Hypermax v9[Slim][Complete S5 Experience][Themed][Fast][OG Battery mod][20 June]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
V9 Installation issue
I got a problem when i was trying to flahs the Rom
i folowed the instructios, installed the zip file (hypermax v9) zip and wiped it.
The problem i got when i was flashing the rom is
"Mounting system
Extracting
set_perm: some changes failed
E: eroor in data/media/0/hypermax+V9.zip
Installation aborted"
I have a galaxy s3 and i use clockworkmode.
What to do. please help
---------- Post added at 06:56 PM ---------- Previous post was at 06:51 PM ----------
HELP!
Every time I try to flash a rom my phone aborts the installation. Any ideas why?? I REALLY need this rom but I can't figure out how to do so! PLEASE HELP!! My phone is the samsung galaxy s3 SPH-L710. Thanks!
can someone pls tell me which kernel and setting do i need to use.? when battery mode when game mode or daily mode(i also need it because i always open my mobile data so it takes too much battery life) andis the v9 good ? and why the musıc player doesnt work in files?
very very bad rom
I am on version 8, never seen so bad rom in my life.
the phone keep freezing, keep restarting, app are crashes all the time.
the ram state is actually good around 500, but it isn't worth the price.
Hypermax v9
You can not Flash the v9 rom. U must flash v8 first and then flash v9
fail
i did everything the tutorial said, but i got an error and soft bricked my I9305. i can't flash any of the versions. any suggestions?
---------- Post added at 03:26 PM ---------- Previous post was at 02:50 PM ----------
yeah, while flashing got an error which said that this is for m0 i9300, this device(i9305) is a m3. what do i do now?
take out vercion for LTE I747
hello may work one vercion for S3 LTE I747
Kernels
Can this ROM be used with either AGNi or Boeffla Kernels?
Arabic language
The keyboard in the rom does not contain the Arabic language
Q&A for Lexer 2 rom for gionee m3 by ravi
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Lexer 2 rom for gionee m3 by ravi. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I tried flashing the RoM, but. It showed error.... Tried again.. same thing
Perform a clear install not upgrade ......wipe data ,delwik ,chache and then try reinstall
Let me know Gionee recovery not accept ur root app......as i try to root with computer I root .exe root not success... Plz help me ....
[email protected]
Sent from my M3 using XDA Free mobile app
Thanks for this rom
But it lost Knock-on (double tap to open screen) feature from stock rom...
Any fix for it here?
there a little kind of bug..
good day sir.. there is a little bug in writing a words.. word "eh" or "he" becomes "fi" sometimes "if".. can u fix this pls. thanks!
I was trying to determine if the Lexer 2 rom by ravi for the gionee m3 was android 4.4.4 or if it is 4.4.2?
Also, is the picture of the head in the actual rom or just in the screenshots?
The Lexar 2 ROM is fantastic, but I have one problem. I cannot get my apps to write to USB drives. The permission is there in the platform.xml, but apps still say access is denied. Please help me fix this.
I can upload pictures of the error messages if that helps.
Sent from my Studio Energy using XDA Free mobile app
---------- Post added at 03:26 PM ---------- Previous post was at 02:41 PM ----------
OK, I fixed it. I had to change the permission from media_rw to media_rwx.
Sent from my M3 using XDA Free mobile app
3Minit battery error
3minit battery is not workin. It says "app version is out of date". Can u give sum solution.....
gionee m3 lexer 2 font
hi
lexer 2 font not working as and even the 3minit battery setting show out of dated need to upgrade it.........can u fix it
I'm loving this rom but when I turn the phone off with the camera on, the phone freezes and then turns back on to the camera. Basically it doesnt turn off while using the camera.
Video call
Video call is not working in this rom. What is the solution?
This rom work in lolipop version
cool_ravi78 said:
Perform a clear install not upgrade ......wipe data ,delwik ,chache and then try reinstall
Click to expand...
Click to collapse
This rom work in lolipop version
Supported mobile
QA Bot said:
Q&A for Lexer 2 rom for gionee m3 by ravi
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Lexer 2 rom for gionee m3 by ravi. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
Thanks for your work
Can you please confirm is BLU studio Energy is supported and what is relevant gapps version
Q&A for [ROM][5.0.2][p760/p765/p768]RESURRECTION REMIX[WIP][CM12]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][p760/p765/p768]RESURRECTION REMIX[WIP][CM12]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Downloading right now, thank you sir!!
Mobile network
When i updatet to latest RR my mobile network stoped working, when trying to connect it show an error "Can't connect to this network right now. Try again later" and if chose Serch networks then the error says "error while searching for networks"! pleas help!
Installed, rom is fast and smoth but no mobile network signal, on first boot was stuck on mobile serching about 15 minutes, i skip that step, try to activate from settings but not working
---------- Post added at 01:51 PM ---------- Previous post was at 01:44 PM ----------
forgot to tell that i do a clean install, format data, cache, system, wipe data, cache, dalvik, install rom, gapps
Hello
Thank you
Hi, thanks you for this rom! ... Android 5.1 is available now, when it may update this rom? o:
Thank you
I can't download this file, no files in this folder
There is no file there when I click on the ROM link
Thanks for your efforts
baseband is not working
In Mexico does not work mobile network,
this rom have two bugs: mobile network and vibration does not work
i test the rom last night, is great, all work (except mobile network) you done a great job, take your time to solve network issue, thanks again for this great rom!
question ?
Thank you for continuing the development of this ROM.. a question the rom y ready or I have to wait for the fix of the Baseband.....thank you so much for continuing the rom
hope that bug will be solved sooonn
downloading now, i will test it, thank that u dont abandonate us
mobile network doesn't work...
good job
I hope good job updating with the arrangement of the mobile network and thanks for continuing to work for this terminal really thank you very much
I have a question
I entered the github page changes and appears as if there is a new version 5.3.9 and does not abut where to download
jonydead said:
I entered the github page changes and appears as if there is a new version 5.3.9 and does not abut where to download
Click to expand...
Click to collapse
yes, but the network still doesn't work ... one thing at a time
Q&A for [ROM][KK][4.4.2][xolo q800] original kitkat rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][KK][4.4.2][xolo q800] original kitkat rom. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thanks for the port to Q800
Hi,
Are there any known issues so far?
Thanks for the post on Q800.
Anantha
I found no bugs till today
tlananthu said:
Hi,
Are there any known issues so far?
Thanks for the post on Q800.
Anantha
Click to expand...
Click to collapse
I have been using it for a couple of weeks (from its developer version).
All the bugs are now resolved.
U can enjoy Kitkat now :highfive:
If you are not sure, make a backup of current ROM before proceeding so that u can revert back anytime :fingers-crossed:
SridharA87 said:
I have been using it for a couple of weeks (from its developer version).
All the bugs are now resolved.
U can enjoy Kitkat now :highfive:
If you are not sure, make a backup of current ROM before proceeding so that u can revert back anytime :fingers-crossed:
Click to expand...
Click to collapse
Sure, Thanks a lot for the share. I will try this week and share feedback.
3G Only mode does not work
Been using this rom for a full day, Good battery life, smooth and fast, no lags.
The only issue I am facing is that when I try to switch my network to 3G only mode there is no signal.
I tried every thing but still 3G only mode is not working.
Please suggest any workaround.
Rest every thing is fine.
Thanks for this
Hello, Thanks for 4.4.2 update. I'll comments again after use this. now downloading
Will wait for Lollipop Update
alshedupur said:
Hello, Thanks for 4.4.2 update. I'll comments again after use this. now downloading
Will wait for Lollipop Update
Click to expand...
Click to collapse
This is a very good ROM for Xolo Q800 with Android KitKat (4.4.2).
Unfortunately root option not working. Please guide how to root this ROM.
qa bot said:
q&a for [rom][kk][4.4.2][xolo q800] original kitkat rom
some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [rom][kk][4.4.2][xolo q800] original kitkat rom. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep xda neat and tidy!
Click to expand...
Click to collapse
can someone plz help me. I have flashed the firmware & then flashed the patch... It completes flashing successfully..but at the first boot setup.. I cannot select the language.. Maybe the touch calibration / its driver is not available.. And so i am not able to complete the setup.. Someone plz help!!! Please
Does this rom supports swapping?
can i do swapping of internal sd and phone storage on this rom.. my device is xolo q800.
And feedback for this rom: this rom is working great. It should include google maps as default application.. however i did that using mobileuncle tools.. but was not able to move esexplorer to the system & make it a system app. battery is working good on this rom.. I am currently lot of storage shortages.. n so looking out for swapping the internal sd (of 2gb) n append it to phone storage so that i can get more space for installing more apps.
please suggest me a method or app for doing this too.. thank you
Did you flashed the patch?
yogz214 said:
can someone plz help me. I have flashed the firmware & then flashed the patch... It completes flashing successfully..but at the first boot setup.. I cannot select the language.. Maybe the touch calibration / its driver is not available.. And so i am not able to complete the setup.. Someone plz help!!! Please
Click to expand...
Click to collapse
Hi, did you flashed the patch?
if you flashed the patch it should not suppose to happen
please check in which order you flashed
you should flash ROM first then patch.
---------- Post added at 04:08 PM ---------- Previous post was at 04:06 PM ----------
chennaikk12 said:
This is a very good ROM for Xolo Q800 with Android KitKat (4.4.2).
Unfortunately root option not working. Please guide how to root this ROM.
Click to expand...
Click to collapse
The ROM is pre-rooted.
You don't need to root it again.
bug
Front camera not working
Info needed
hi Sree,
Can you please specify if why this patch is needed ... or what its do....?
regards
Vishal