[ROM] [AOSP/NEXUS] [SAFESTRAP] KitPop - v1.3 - CM Apps! - Wifi AP!

[ROM] [AOSP/NEXUS] [SAFESTRAP] KitPop - v1.3 - CM Apps! - Wifi AP! - Verizon Samsung Galaxy S 4

Hey all,
I am proud to announce the release of KitPop 4.4.4 for the VZW S4! It's goal is to be a near to stock android experience, with all the stability of stock, and some of the perks of customs ROM!
This is based off of @Joe-Tech's great Super-Nexus ROM.
Disclaimer
- Your warranty is now void. ;p
I, nor anyone else involved are responsible for Thermo-Nuclear war caused by flashing this. You are doing this of your own free will, good luck.
Screenshots:
http://imgur.com/a/RORv9
Requirements
- Rooted
- SAFESTRAP 3.75 A03
- Either NC5 or NK1 (NG6 works but has SELinux issues).
Important Note:
I can only offer support for clean ODIN imaged NK1 or NC5, as the upgrade and WiFi fix methods end up leaving you with a cluster junk of varying partition versions, which makes WiFi/Cellular Data/GPS on Custom ROMs VERY hard to achieve. Feel free to install the ROM on any setup, and post your findings (as well as your partition setup) but, then please dont complain of cellular data/wifi/gps issues, I only support clean flash NC5 & NK1 officially.
Instructions
1. Download the ROM
2. Place on root of SD Card
3. Reboot to SAFESTRAP
4. Wipe ==> Advanced Wipe ==> Everything except SD Card
5. Install the ROM
5. a. If on NK1, flash the NK1 SELinux Fix
5. b. Flash Modules for your version:
NC5 - https://www.androidfilehost.com/?fid=23486521113837640
NK1 - https://www.androidfilehost.com/?fid=95832962473396366
6. Reboot
7. Setup ROM and Enjoy.
8. A. (Optional) If WiFi still isn't working, flashy he NC2 WiFi Fix here: https://www.androidfilehost.com/?fid=23487008491963696
Features
- 100% stock kernel, as the locked bootlaoder prevents the loading of any unsigned kernels
- OK Google Everywhere (Ok Google w/ Screen Off While Charging works as well!)
- Messenger (5.0) & Hangouts pre-installed (You choose!)
- IR Blaster Working (No app included)
- SAFESTRAP 3.75 A03
- SuperSU v2.40 (included, but not rooted)
- TowelRoot (Included in case you want to root after flashing)
- AdFree
- Minimal BusyBox included (for full, use Stericson Busybox)
- SELinux Mode Changer (Not necessary, but may need it for XPosed, NC5 Only)
- Snapdragon BAttery Guru/Calibrator
- XPosed Installer 2.7;
- XGELS
- Eggster (Lollipop Easter Egg)
- Force Immersive
- XPosed Old Icon (Quick Trick to tell whether or not XPosed is active)
- Low Bloat - most apps are removable
- Modload by Surge1223 pre-included, just run SU, then ModLoad through terminal
-Fancy Switcher (Android L Style Card Multi-Tasking)
- Newest KitKat Google Dialer
- Google Now Launcher
- Cabinet Beta File Manager Included
- Lollipop Apps
- Google Voice for Visual Voicemail
- Terminal Emulator
- Soft Keys Enabled - via build.prop
- Multitasking Smart-Slider Bar
- Disabled Capacitive buttons
- Home Button Enabled
Changelog
Code:
02-01-15: Initial Release
02-02-15: v1.2 - fixed bad updater binary
-replaced broken dialer with Joe techs black out dialer no more crashes!
-build.prop edits
- LTE fix for those experiencing stuck on 3G -- Hidden.img changes to fix it removed, solved the problem
- WiFi now works on first boot for setup -- auto soft-reboot
- AOSP 4.4.4 browser
- CM Apps and Libs added
- improved boot time -- remove unnecessary/useless processes such as non-used SU/Xposed processes.
- NK1 data fix -- APN Edits
- Updated Google Apps
- Fixed SEPolicy to allow root /system access during voice calls
02-16-15: v1.3!: -
- More Build.prop edits for VZW Data
- PS4 Remote Play Enabled (Just download the PlayStation App from the Play Store)
- IR Fix
- PRL Updated!
- GPS Fix (NC5)! Maybe.... (NK1)
- Cleaned up Updater-Script
- Updated System Apps
- Added in K01shutdown script to fix hot reboot WiFi (Doesn't work yet)
- Added WiFi AP app by [user=4168602]@klabit87[/user], thank him!
- Added some more upstream Linux commands
- GMail 5.0 w/ exchange support
- Removed unnecessary partition flashes. If WiFi/data doesn't work, then flash the NC2 WiFi Fix
- Possible LTE Fix? (Credits to: @LegitSU) -- Dual Radio Mode sort of enabled
- Flashing Modules is now required
- Now compatible with all JFLTExxx & most I950x variants (read through thread, zip modification required
- Universal Init.d, for real this time, thanks [user=4168602]@klabit87[/user]
- Added Scripter
- Version Bump
- Secure Settings added for the WiFi AP
- Updater Script Fixes
- So many stability Fixes I literally can't list them all
- Added experimental UMS Scripts, don't do anything at the moment
- Updated GApps
- I've probably forgotten some, but for 1.4, I plan on more closely linking my commits, so that I can give more accurate changelogs
- NK1 Modem
- Added new APN
TBA: v1.4 - MTP - Possibly replacing it with UMS if we can get the stupid VZW CD Installer disabled
- UMS implementation (hopefully)
- WiFi Softboot solved - in 1.4, I have replaced the reboot command with a script to unload the WiFi Module & then reboot
- Tell me what you want! Use the Features Request Tab!
WIP
- MTP - Possibly replacing it with UMS if we can get the stupid VZW CD Installer disabled
- WiFi AP - works via the WifiAP app, but am working on getting the stock switch to enable it
- WiFi Softboot - in 1.4, I will replace the reboot command with a script to unload the WiFi Module & then reboot
Read Everything? Download:
ROM v1.2: https://drive.google.com/file/d/0B1rm1VFiz_2FRjZLWURaYzZNb3M/view?usp=sharing CE55E446D7269CAC634AFE562062A220
ROM: v1.3 - https://drive.google.com/open?id=0B1rm1VFiz_2FS2RJX0tOVFNUanM&authuser=0 B505C77F9B2928D2D2B263977F132EEC
NK1 SELinux Fix: https://www.androidfilehost.com/?fid=95916177934521441
Flashable Addons
Disable Soft-Keys/Re-Enable Capacitive Keys, thank @klabit87! - https://www.androidfilehost.com/?fid=95916177934533151
FAQ
- WiFi not working? Try a soft reboot, should work then. You'll need to do this after every full reboot - FIX: Turn WiFi off before Powering off/Rebooting
- Must SELinux be Permissive? Although many AOSP ROM's require SELinux Permissive, this one does not, Chrome and the Play Stock work just fine! (Thanks to @bokchoi2020), If on NK1, flash the SELiniux Fix!
- ROM Slot Compatible? This can be flashed in a ROM slot, however, it /may/ affect WiFi in the stock slot (depends on your setup), and I do not provide direct support for ROM Slot Setups.
- Must I ODIN to NC5/NK1? Not necessarily, as long as you haven't flashed many partitions, for ex, if you had a custom ROM, and flashed a newer modem, you will have no trouble, but if you had previously flashed a different Non-HLOS, or hidden.IMG, it will most likely not work.
- MTP Doesn't Work? I'm aware, and @bokchoi2020 and I may have a fix in the works.
- I want x feature included? Post it up, but be specific, and use the "Feature request" tab at the top.
- Data issues? Use the vzw-APNfix.zip and use change APN from the Play Store. If that fails, try this: http://forum.xda-developers.com/showthread.php?p=58598354
- Want WiFi Hotspot? Use the included WiFi AP app.
Credits: @giggle: NC2 Wifi Fix @surge: NK1 Modem & Modload @Danvdh: GPE Base @jmsq: Sorting out SAFESTRAP and getting the first AOSP ROM booting on SS. @Joe-Tech: Super Nexus Base @sanoc69: GPE IR Fix @Chainfire - SuperSU & Adbd Insecure (helped a crap ton with development) @geohot - TowelRoot @Hashcode - SAFESTRAP Base @bokchoi2020 - SELinux Library Fixes! @muniz_ri - Updated SAFESTRAP with ROM Slots, @klabit87 - the WiFi AP app and init.d fixes
XDA:DevDB Information
[ROM] [AOSP/NEXUS] [SAFESTRAP] KitPop, ROM for the Verizon Samsung Galaxy S 4
Contributors
npjohnson, npjohnson
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: NC5+
Based On: AOSP, CM
Version Information
Status: Stable
Current Stable Version: v1.3
Stable Release Date: 2015-02-02
Current Beta Version: v1.4
Beta Release Date: 2015-02-08
Created 2015-02-01
Last Updated 2015-03-06

Wow!
First of all, wow! This is amazing! If I may, I'd like to request a way to re-enable the capacitive buttons. Thanks for all of the work that you've put into this ROM!

connorjb said:
First of all, wow! This is amazing! If I may, I'd like to request a way to re-enable the capacitive buttons. Thanks for all of the work that you've put into this ROM!
Click to expand...
Click to collapse
Suggestion taken, zip in the flashable mods section.

Note to all; If you are looking for a new feature, Could you please use the "Feature Request" Tab at the top? It would be very appreciated, and would help me keep track of what you guys want.
Cheers as always.

Didn't flash...
When I first tried to flash this, I got the following error(s): Error executing updater binary in zip ' /external_sd/Kitpopv1-02-01-15x.zip' Error flashing zip ' /external_sd/Kitpopv1-02-01-15x.zip'.
I'm running eclipse ROM, using the latest safestrap 3.75, and before I flashed I advanced wiped everything but external SD. Thoughts?

Is there a way to disable the on-screen buttons? They are nice and all but they take-up some of the screen's real estate

connorjb said:
When I first tried to flash this, I got the following error(s): Error executing updater binary in zip ' /external_sd/Kitpopv1-02-01-15x.zip' Error flashing zip ' /external_sd/Kitpopv1-02-01-15x.zip'.
I'm running eclipse ROM, using the latest safestrap 3.75, and before I flashed I advanced wiped everything but external SD. Thoughts?
Click to expand...
Click to collapse
Looking into it now. Flashed this and tested right before upload.. it could be a bad download? Would you mind trying again? If not, then its a bad upload... and that means re-uploading on my end -_- sigh...
EDIT: Figured it out. I uploaded the unsigned zip. Re-Uploading now. ETA: 45 Minutes
Ugh.

daventodd123 said:
Is there a way to disable the on-screen buttons? They are nice and all but they take-up some of the screen's real estate
Click to expand...
Click to collapse
Check the Flashable Mods section, but the ROM wont flash until the re-upload finishes in about ~30 minutes.

Upload Finished. Re-Download the ROM and try again for those that were having issues. This one works for me.

daventodd123 said:
Is there a way to disable the on-screen buttons? They are nice and all but they take-up some of the screen's real estate
Click to expand...
Click to collapse
connorjb said:
When I first tried to flash this, I got the following error(s): Error executing updater binary in zip ' /external_sd/Kitpopv1-02-01-15x.zip' Error flashing zip ' /external_sd/Kitpopv1-02-01-15x.zip'.
I'm running eclipse ROM, using the latest safestrap 3.75, and before I flashed I advanced wiped everything but external SD. Thoughts?
Click to expand...
Click to collapse
Should be working now.

If it's not too much trouble could somebody post the md5?
Thanks
Sent from my SCH-I545 using Tapatalk

klabit87 said:
If it's not too much trouble could somebody post the md5?
Thanks
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Just placed it in OP.

npjohnson said:
Just placed it in OP.
Click to expand...
Click to collapse
Thanks! Now to backup and try it out :good:
Sent from my SCH-I545 using Tapatalk

v1.1 should be up by tomorrow morning, you can download this build through Chrome on your Device if you want, and the changes were mainly behind the scenes, Dirty-Flash tested and approved.

Deleted

Deleted

Deleted.

NICE WORK

v1.1 is Live! Any of the reported bugs experienced that weren't on the known bug list are fixed. Brings a lot of behind the scene improvements, as well as some CM Apps! Dirty Flash should be fine.
Happy Flashing!!!

Related

[ROM] [G.E.] [4.2.2] [AROMA] [VZW] GoogleEdition.v6.0 09/11/13

**Update about the future of this project. We will continue to update and support this port until the majority of users are running our new project.** http://forum.xda-developers.com/showthread.php?t=2432621 it is not ready yet at all. But I thought id post a heads up well in advanced so nobody freaks out.
This is a port from the 9505 Google Edition system dump that was posted. It was originally meant as a proof of concept build but no one picked up the project so I am supporting it.
@hlxanthus has been continually working on mods and feature updates within the ROM. I have a shared folder where we can both access current files for the project. Be sure to thank his posts :good:
Current Build: 9/11/13
Google Edition v6.0 Aroma Deodexed
Aroma package with lots of options built and pieced together by @hlxanthus.
--Link--
https://copy.com/BQlJ0
http://www.androidfilehost.com/?fid=23134718111254860
md5:
8755cbf42def51446ff1440ac2105637
Changelog:
Aroma scrolling fixed
All apps updated (I think at least... G+ updated right as I went to upload so I had to kill it and update and re-up)
Aroma permissions changed to hopefully fix all the random FC issues
Big update for xposed framework.
- in the installer it now lists all modules and their versions. I did not update all the modules because of this. Honestly I would only install the framework now and pick the modules separate. I still use theme engine, xblast, and gravity box personally.
I was working on new builds of systemui and framework-res but kept getting FCs so I reverted those changes. So carrier label is still screwy but you cab change it with the xblast module. :good:
Overall this update is minor besides the xposed framework. But the weird FC people were getting MAY BE fixed.
Please report any bugs. With bug reports please include a syslog log or adb log. It is also helpful to include the aroma log. To get this just before the last continue there is a save log button in aroma. Thanks.
Options:
A Lot
Wipe or dirty flash
One aroma for both pure and tweaked now
Browser selection
Gapps selection
Launcher selection
Clock options
Navbar options
Extra useful apps options
Phone_Info(a shortcut for the already built into android hidden menu *#*#4636#*#* this can do no wrong, it is just a link to a universally built in android feature)
Keyboard options
Battery options
Quick reply mms option
Viper4android option
TW camera option
Watchon app
TricksterMod app
Xposed framework and modules to be able to change quick settings, carrier label, colors and placement, and also fully theme using xtheme
Lots of kernels to choose from (I'm using my tweaked audism kernel)
Init should be installing properly with all performance options if so desired.
Instructions:
Download
Reboot to recovery(I prefer and HIGHLY recommend using only TWRP-2.5.0.2... will include flashables in next post)
Backup your current ROM(if you want)
Install and select your options
Reboot
If people want to donate it is appreciated but not expected. My pp Addy is in my profile or click here
Thanks to all who have already. My wife is slightly less irritated by my android obsession lol.

[ROM][G.E.][4.2.2][AROMA][VZW]GoogleEdition.v5.6 8/11/13
Me7 folks:
http://forum.xda-developers.com/showthread.php?t=2441441
[RECOVERY LOCKED/ME7] Safestrap Recovery v3.5x
http://forum.xda-developers.com/showthread.php?t=2428226
[RECOVERY LOCKED/ME7] Safestrap Recovery v3.5x [WIP DISCUSSION]
http://forum.xda-developers.com/showthread.php?t=2448726
Roms that work with safestrap
Like all Roms... Mine installs a kernel at the end... Since this project actively supports MDK... It installs an MDK kernel. Which is covered in the three threads I linked to above(which you should have already read). Hint: flash the provided kernel fix from the SafeStrap O.P.
AndroidSlave said:
Just a tip for ME7 Safestrap users:
Install this ROM in custom mode in aroma with only minimal apps installed, including Google apps etc.
I tried the install many different ways and kept getting issues, hard and soft reboots, etc.
After install with just nova, only Google play store, and just a few other minimal things, everything is amazing and smooth. Then just manually install everything you need.
For some reason safestrap and the me7 combo causes issues with something.
Just my two cents. Thanks a million to @Dubbsy - beautiful ROM - matter of fact, if I didn't have this ROM combined with gravitybox, I would have returned this device (I'm still within the 14 day grace period)...
Click to expand...
Click to collapse
Thanks to
ALL my generous donators. I do this as a hobby for fun. It's always greatly appreciated to get those emails. :good:
@buckmarble for kernel and rom/project discussion
@Treken for help and rom/project discussion. TeamTrek for ChaOS project
@hlxanthus for being a great partner on this project. We are easily twice as far along as I would have been alone.
@MrMuzik for the help on the banner
the 9505 people for being the first to get everything,
Rujelus22 for his AIO and the knowledge I've gained by digging through BluKuban for VZW
Actual Bugs:
**don't mess with the network settings. If you do, use the phone info app choose CDMA/lte auto prl.
**Carrier label is still screwy and shows up a jumbled mess for half the people.
Data Fix for those that went into network settings:
Going into the built in network settings automatically sets your preferred network to WCDMA. Meaning, no service. The only way to get it back without jumping through a bunch of stupid hoops is to use the built in hidden dialer code *#*#4636#*#*... Or just use the app icon called Phone Info(does the same thing)
To fix:
Go into mobile network settings.
Verify that your CDMA subscription is set to RUIM and not NV.
For good measure go into the rest of the options and set it to CDMA/LTE, automatic, and allow data roaming.
Back out to your home screen.
Then go into Phone Info app.
Scroll to bottom and tap radio off.
Open the drop down list and select CDMA/LTE auto (PRL).
Turn the radio back on.
Reboot.
Upon reboot open Phone Info again.
Verify it is set to CDMA/LTE auto (PRL)
** you should have full service now * *
** if not * *
In Phone_Info(*#*#4636#*#*):
Try CDMA auto (PRL)
Then try CDMA/GSM/LTE
If those still don't work then your nv_data needs reset. The only way to do that is in the hidden menu dialer codes in a touchwiz-stocktype rom :good:
If you destroy your nv_data and cannot get data back via the above you need to (stop screwing with your network settings)flash back to a TW ROM, enable hidden menu, and do a NV data reset via dialer code. After doing that make sure your phone is not in modem mode under diag dialer code. Until I update this section Google is your friend. And it is available information, verified. Your lack of searching skills doesn't mean pester my inbox...
"Bug" Fixes:
Reboot when hit volume up or down:
-Open gravitybox and deselect the 2 items that are checked under media tweaks
Carrier Name is a jumbled mess
-Install XBlast xposed module, enable it, open carrier section, edit it to what you want it to say.
WiFi doesn't turn on at all
-user error, check the download's md5 number
-user error, dirty install, do a full wipe prior and see if that was the issue
-kernel error, not likely if the above 2 have been done properly
GPS doesn't work
-user error, check the download's md5 number
-user error, dirty install, do a full wipe prior and see if that was the issue
-AOSP bug in general. TW writes something to a partition that stores your GPS location and area. AOSP roms don't edit it or write it. So you need to get a GPS lock in a touchwiz rom, then flash back to this. You can make a backup of your current AOSP/GE install, flash a TW rom, get a lock, and restore your backup. This has been a continued known issue with all ROMs that aren't fully TW.
Changes/Old versions:
-v1 was to see if I could get any data on the 9505
-v2 was fix reboot issues on v1. It is still the half odex half deodex
-v3 deodexed, s-voice, watchon, tw camera, tw wallpapers, build.prop tweaks, no native superuser preinstalled. https://copy.com/1Ce0m
-v4 was to update the google apps but didn't work out well so I reverted to the old apps and
-4.0.1 removed the tw apps. Added the lte on off app.
https://copy.com/A1Uk3 Deodexed
https://copy.com/xBVJe Odexed
-PureG.v1- deodexed, no tweaks, no native superuser, ktweaker removed, no tw apps
https://copy.com/otV2R
-4.5 deodexed. If prompted to fix su just ignore. The latest su is installed.
https://copy.com/GRQ34
My own build with all my gapps replaced with team blackouts and their updater
https://copy.com/mjLEm
PureG.v2
https://copy.com/8qUi4 & http://www.androidfilehost.com/?fid=13858085825318748450
4.6 deodexed
http://www.androidfilehost.com/?fid=13858085825318748477
GoogleEdition 4.6 Odex
http://www.androidfilehost.com/?fid=13858085825318748480
GoogleEdition 4.6 MyWayhttp://www.androidfilehost.com/?fid=13858085825318748482 & https://www.copy.com/Nc2uM
GoogleEdition 4.6.1 MyWayhttps://copy.com/qElJ9
GoogleEdition 4.6.1 Deodex - tweaked version https://copy.com/zGtWF
PureG.v3 - stock Google no tweaks https://copy.com/DgNvPvFAhcib
Test pure version with No CSC data https://copy.com/CDdtj
GE 4.7
https://copy.com/pKKuZ with KToonsez Kernel
https://copy.com/p6TxM with stock Kernel
GE 4.7.5
https://copy.com/Xv347
Pure.v4
https://copy.com/IATso
Updated all Google apps, fixed permissions, installed new supersu with new dependencies and permissions, signal bars are fixed
Google Edition 4.8.xx deodexed
https://copy.com/x2laA
changelog:
Updated all Google apps, fixed permissions, installed new supersu with new dependencies and permissions, a couple more minor framework changes, fixed signal bars from 4.7.5, included es file in data/app, and it is using the latest(7/24) KT kernel. No SODs that I have been able to see.
Google Edition PureG.v5 - Stock google, full deodex, no performance tweaks, and the only additions to the Google Experience I added was a reboot menu(stock was just power off), and SuperSU
https://copy.com/NMXKF
Md5: 9e845492078d938327176bd7f5bef3c9
5.4.1:
https://copy.com/7a24X
md5: 9eab755335ced6597642b02e5b25296c
Google Edition 4.9 CleanBuild deodexed
https://copy.com/yd3pj
Md5: cca28f4582838b14fa4cae26e72a629c
Google Edition Odex'd 4 me
https://copy.com/EUOGU
Md5: 0bacda0d4fa15bb8f4379a5f249eab3a
Google Edition 5.5
https://copy.com/s2fNI
md5: e914058bd08cc0f129154309c1098a5e
Google Edition 5.6
https://copy.com/CgLCU
md5: eefcfa2e85fe1c2d6d4f5ab6990ed15a
Google Edition v5.7 Aroma Deodexed
Aroma package with lots of options. Built and pieced together by @hlxanthus.
--Link--
https://copy.com/go7aI
--md5--
4b2d6578a621583eaf120549b400a9c5
Changelog:
Added 4 new kernels (agat, abyss, deviant, insecure stock ge, and my "badassery edition-audism kernel v2"), updated 2 others(KT, audism), updated all apps in installer (to cut back on stuff being installed to data using your precious space), added all xposed modules individually selectable with descriptions (you need to select xposed in system mods then it will open up the next sub menu), I added missing data files (potentially HELP with the random data issues), I didn't fix carrier label but I'm 80% sure I know where everything is now
Google Edition v5.8 Aroma Deodexed
https://copy.com/hfwtp ICS themed aroma
https://copy.com/aQDCs MIUI themed aroma
--md5--
54b1a889e5da6668da31eab9ae2967cd ics
dc9088367ba8047873a7b0a5135c4b63 miui
5.9:::
https://copy.com/wduZa
md5:
1f7189a0727d1a32a67457649ff1e485
Sprint proof of concept(for sprint not vzw):
**I would strongly suggest using and supporting the developer who is working actively on the Sprint version. If I find any specific fixes for things I will forward my info to him to continue helping others.** LINK HERE
https://copy.com/pIaix -my p.o.c. build before the one above was made available

[ROM][G.E.][4.2.2][AROMA][VZW]GoogleEdition.v5.6 8/11/13
Dubbsy's Extras, Tools, and Resources:(this will be updated as I make or gather more)
WARNING
Don't change a recovery from within goomanager or rommanager or romtoolbox or any app installed on the phone while on my GE rom.
Download a flashable recovery or manually Loki and push it from your computer.
Recoveries that are pre-loki'd and ready to be flashed in your current recovery are posted below.
I personally only trust and use TWRP 2.5.0.2(2.6 is buggy). I've seen too many "issues" with ROMs totally disappear when people stopped using cwm in favor of twrp. But cwm recoveries are included below regardless.
TWRP 2.5.0.2:
https://copy.com/0lTMs
Dubbsy's MiDarkness Theme for TWRP 2.5-2.6:
Preview: http://db.tt/2zc9uFt2
*Black and Orange TWRP theme based off of the black theme by z31s1g's black theme.
*To install the theme:
1. Rename the zip file to "ui.zip"
2. Make a folder in your TWRP folder called "theme"
3. Paste ui.zip into theme
4. Reboot to recovery
~ Download ~
*https://copy.com/HjJ7a
CWM-Touch-6.0.3.6:
https://copy.com/IgHQf
Phil Z Recovery 5.0.8.5:
https://copy.com/ODkRl
(*Hit the thanks button if you use these tools.*)
Mods included in the aroma package:
TW camera for Google Edition ROMs v1 7/12/13(included in aroma)
https://copy.com/VqkgF
*Note: not all functions work yet. Gallery icon is still linked the SecGallery. No more work will be done on the camera until both my other projects are in a stable condition. This was only done because at least one person posted or messaged me for it every day. I will ignore all requests for more camera work until the other 2 projects are "complete"

I'm going for it.

rustynutzz said:
I'm going for it.
Click to expand...
Click to collapse
yesss!!!! just added to roms list.

Can u add the TW Calendar widgets?

Getting ready to go into recovery and flash this bad boy. Wish me luck!
P.S. Probably shouldn't be flashing my phone on ambien lol

I can try later. Not sure though
sent from my Galaxy S4 using xda premium

rustynutzz said:
Getting ready to go into recovery and flash this bad boy. Wish me luck!
P.S. Probably shouldn't be flashing my phone on ambien lol
Click to expand...
Click to collapse
hahaha... probably not. reminds me of playing socom on ambien.... i was hiding in the bushes waiting for someone to come by.
Good times

theidoctor said:
hahaha... probably not. reminds me of playing socom on ambien.... i was hiding in the bushes waiting for someone to come by.
Good times
Click to expand...
Click to collapse
I remember halo on that ish, crazy times.
I'm in for a flash, already backed up. Anyone know if this requires a kernel flash or if this is V3 of Op's words? nvm I see V3

rustynutzz said:
Getting ready to go into recovery and flash this bad boy. Wish me luck!
P.S. Probably shouldn't be flashing my phone on ambien lol
Click to expand...
Click to collapse
How is it? Are the signal bars fixed?

Man this is awesome! Flashed v2 earlier just saw a v3 release. Thanks man! Does v3 have root?

marc314 said:
Man this is awesome! Flashed v2 earlier just saw a v3 release. Thanks man! Does v3 have root?
Click to expand...
Click to collapse
run root checker.

Installing now. Will report in a few

kpa2727 said:
I remember halo on that ish, crazy times.
I'm in for a flash, already backed up. Anyone know if this requires a kernel flash or if this is V3 of Op's words? nvm I see V3
Click to expand...
Click to collapse
thought a kernel was added to it but dont quote me on that. id flasha kernel just in case. dont want to be on ambien and go through that mess

theidoctor said:
thought a kernel was added to it but dont quote me on that. id flasha kernel just in case. dont want to be on ambien and go through that mess
Click to expand...
Click to collapse
downloads done, transfer time !

Up and running. Seems a little smoother then V2. LTE back on. Not going into mobile networks. Checking MMS right now.

Rnd0209 said:
Up and running. Seems a little smoother then V2. LTE back on. Not going into mobile networks. Checking MMS right now.
Click to expand...
Click to collapse
Nice if you can let me know how well it's working I'll download and flash tomorrow.

GPS not working. MMS seems like its working. LTE is back but did not go into mobile networks.

inseconds99 said:
Nice if you can let me know how well it's working I'll download and flash tomorrow.
Click to expand...
Click to collapse
lik 11 minutes tomorrow? just do iiiiiit

[ROM][KitKat4.4.2]CIVZ_NOTE8.0_rev1.0[15/nov/2015]

Note:
To all users, I did this rom as I thought some features that are present in my Note Pro12.2 custom rom were missing.
All the stuff is build into the system and framework without any need for Xposed framework. As I found that Xposed is sometimes giving instability or the modules it uses. You still can us the Xposed Framework as I build it into the system as a option.
I would like to thank ZaneZam for his kernel. I only added some stuff into the ramdisk to add some system controls.
I would like to thank the following for tips, guides and apps:
tdunham
daxgirl
Lord_boeffla
ikrom
one_love_420,
cstayton,
kin201303
tkari4,
kmokhtar79
Chainfire
ficeto
androidfilehost downloadCivZ Note 8.0 KK
Installation:
Download the rom
Make a system Backup
Do a full wipe (factory reset)
Install rom with custom recovery
Rom Features:
[*]Android 4.4.2 TW based
[*]ZaneZam kernel and boeffla app Included see here for all details
[*]KNOX removed
[*]ExternalSD writeread fix
[*]Rooted
[*]Busybox
[*]All apps in MultiWindow by default (no need for a app)
[*]Removed safe volume warning
[*]Disabled scrolling cache
[*]3Way Reboot
[*]init.d support
[*]Disabled signature checks
[*]GPS auto update script for best gps connection, updates the file every 5 days
[*]"Official" system Status hack
[*]Application "Autostart" added in development section
[*]AppOps enabled and available in settings
[*]Sound Settings new entries= Viper4Android and Hardware volume rocker configuration options when screen is off
[*]Display settings with new entrie = Network Traffic
[*]+200 Fonts build in.
[*]Ram status in notification area
[*]New "Advanced" tab in settings with the following options
*Memory cleaner in Notification Area with color control
*Quicklaunch enable/disable option
*Ongoing Notification enable/disable option
*Statusbar Hidden Buttons (recent apps, home, lockscreen) enable/disbale option
*3Minit Battery icons control
*Statusbar color changer
*SuperSU
*Block Advertising
*System Sound control: Enable/disable Bootsounds, .......
*Boeffla Kernel control
*Xposed framework
Attention users:
Installing a stock kernel or a other custom kernel will disable some rom options like "system sounds control"
Apps like Viper4Android, Xposed Installer, Boeffla won't be shown in the appdrawer, you can acces them true the "Advanced" settings tab
Changelog:
15/Nov/2015:
Official release Rev1.0 after 3 weeks of testing and building.
XDA:DevDB Information
CivZ-NOTE8.0-KK, ROM for the Samsung Galaxy Note 8.0
Contributors
civato, Civato, ZaneZam
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: KitKat Bootloader
Version Information
Status: Stable
Current Stable Version: Rev1.0
Stable Release Date: 2015-11-15
Created 2015-11-15
Last Updated 2015-11-15

Should I use a different recovery than TWRP? The aroma installer is upside down and doesn't respond to touch.

Sir please..
Throw a hint to let me know
What it takes to get ot working for gt-n5100 (3G)
---------- Post added at 07:35 AM ---------- Previous post was at 07:34 AM ----------
@BB said:
Should I use a different recovery than TWRP? The aroma installer is upside down and doesn't respond to touch.
Click to expand...
Click to collapse
That's a issue with our recoveries

Thanks for the ROM. Is there a ROM for N5100?

Make for 5100 please!

Guys please read the other thread recently discontinued. Civ said the update would be for 5110 only.

Wow, I thought the ROM builds were done with until I saw this...
I must admit I have been toying with another ROM but have used ZaneZam's Kernal though it is a beta. One thing each revision got better and better. I found resetting the tools settings and clearing cache to be important when changing kernels.
I am not completely happy with the kernel as some things need corrected on the build I am running. The only reason I chose to run his latest revision is that it is fast and clears up some of the lag with Miracast with sports.
Also I found that not many tools work proper with his kernels. They function but have some issues that may mess with the kernels function.
I use Xposed framework and a lot of modules but keep away from Xblast and Wanam... as they have strange characteristics with KK.
I use CPU adjuster as a charging profile switcher. Since it does not save Boefolla config profiles with memory and kernal settings, I am forced to use the standard profile and tweek it manually in CPU adjuster. CPU adjuster lets you adjust charging rate to 2 amps so you get another 250 ma of juice.
I made a few tweaks to allow for the best miracast connectivity and wifi strengthening, by adding a sysctl.conf file with a number of tweaks. One being limiting IPV6 issues. Though if anyone disables IPV6, they will loose miracast and VPN connectivity.
I recommend using Veno, Vegas, Yeah, Scalable, or LP depending on your throughput and congestion, with miracast. I have an old router that sucks so Scalable is the best for my needs.

Is there a list anywhere of what apps are included in each of the options in the aroma installer? It's sort of a pain to just guess, and then guess wrong & end up with a bunch of stuff you don't want. One thing I'm looking for is the stock Samsung video player app (purple icon, the one that has the minimize-to-a-floating-window feature). I installed "Samsung Apps" from aroma, but it's not in there.
Unrelated: I'm getting the upside-down-and-sideways-aroma problem as well. I believe Phil3759 (of PhilZ recovery) mentioned that the recovery program has to do some monkeying with the drivers to get it to work properly. I'm using TWRP, which correctly shows up in landscape mode, but aroma shows up landscape and upside down - while at the same time the touch zones are clearly running in portrait mode. You can still use it, by guessing where to touch and using volume up/down, but it's a pain in the ass.

I couldn't get root binaries to install. On philz cmw 6.x.x recovery. Is there a suggested recovery to use, civ?

FrozenRiff said:
I couldn't get root binaries to install. On philz cmw 6.x.x recovery. Is there a suggested recovery to use, civ?
Click to expand...
Click to collapse
Same here with TWRP.

FrozenRiff said:
I couldn't get root binaries to install. On philz cmw 6.x.x recovery. Is there a suggested recovery to use, civ?
Click to expand...
Click to collapse
I recommend Philz recovery http://forum.xda-developers.com/showthread.php?t=2287802

FrozenRiff said:
I couldn't get root binaries to install. On philz cmw 6.x.x recovery. Is there a suggested recovery to use, civ?
Click to expand...
Click to collapse
rfb813 said:
Same here with TWRP.
Click to expand...
Click to collapse
I've also had no luck with root access. There is no su binary in either bin or xbin directories. Chainfire's SuperSU install package does not grant root access after flashing. Do we need to use CF-Autoroot in order to gain root access?

Mattix724 said:
I've also had no luck with root access. There is no su binary in either bin or xbin directories. Chainfire's SuperSU install package does not grant root access after flashing. Do we need to use CF-Autoroot in order to gain root access?
Click to expand...
Click to collapse
I had same problem. Flashed UPDATE-SuperSU-v2.46.zip in recovery and got root access.

vinal said:
I had same problem. Flashed UPDATE-SuperSU-v2.46.zip in recovery and got root access.
Click to expand...
Click to collapse
I'll give that a try again. I had tried both of the zips on the SuperSU and both failed to root my N5110. I came from the CM 13.0 beta so maybe that has something to do with it.

Mattix724 said:
I've also had no luck with root access. There is no su binary in either bin or xbin directories. Chainfire's SuperSU install package does not grant root access after flashing. Do we need to use CF-Autoroot in order to gain root access?
Click to expand...
Click to collapse
vinal said:
I had same problem. Flashed UPDATE-SuperSU-v2.46.zip in recovery and got root access.
Click to expand...
Click to collapse
I just updated the binary, I don't knwo why it fails with some people. Reroot from recovery then.
In philz recovery you can reroot.

vinal said:
I had same problem. Flashed UPDATE-SuperSU-v2.46.zip in recovery and got root access.
Click to expand...
Click to collapse
Thanks, worked for me also.

Got all working and then rebooted and now even though I get wifi signal everything is offline. Can't access maps, Playstore, or internet. Any ideas! This is now on other Roms as well.

So does the spen work on this Rom

Does this rom have aircommand feature?
Thank you,

ganggreen777 said:
So does the spen work on this Rom
Click to expand...
Click to collapse
It's TouchWiz-based so I don't see why it wouldn't work like normal.
casper66m said:
Does this rom have aircommand feature?
Thank you,
Click to expand...
Click to collapse
I don't see that listed in OP so I assume not.
Just download and try it out! Make a backup first in case you want to go back.

stang5litre Ultra Note5 (MDK,OC1,OF1,&Below)

Fully Deodexed And De Bloated
Downloads:
stang5litre Ultra Note5 MDK
https://www.androidfilehost.com/?fid=24459283995298537
stang5litre Ultra Note5 NON MDK NON-MDK
https://www.androidfilehost.com/?fid=24459283995298589
Kernel
https://www.androidfilehost.com/?fid=24052804347760875
MDK Instructions:
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open Your preferred recovery (TWRP) is what I used.
3. While in Recovery Mode Factory Reset
4. Select the Zip under Install
5. Flash Rom
6. Once complete your device will reboot and pause on the Samsung splash screen for about (5 - 10 mins) before completely rebooting. So Don't be worried if you think it is taking a while.
SS Instructions
From Any Rom In SafeStrap.
Does not Apply to OC1 bootloader as SS is not compatible with OC1 bootloader.
Preraquisites
Download stang5litre Ultra Note5 NON-MDK Rom.zip
Download OC1_Firmware.zip https://www.androidfilehost.com/?fid=24052804347795416
Download OC1 SS/FF Flashable Kernel.zip
If coming from any Rom Before OC1 Ex 4.4.2 or Below
1. Boot into SS
2. Flash stang5litre Ultra Note5 NON-MDK Rom.zip
3. Flash OC1_firmware.zip
4. Flash SuperSU v2.49 Beta
5. Flash OC1 SS/FF Flashable kernel.zip
6. Reboot system.
Order of flashing does not matter as long as the Kernel is last.
If you are coming from any OC1 Rom.
1. Use NC5Flasher to flash the NC5 Kernel and reboot.
This will boot you straight into SS.
- NC5Flasher by @klabit87- LINK
2. Flash stang5litre Ultra Note5 NON-MDK Rom.zip
3. Flash SuperSU v2.49 Beta
4. Flash OC1 SS/FF Flashable Kernel.zip
4. Flash SuperSU v2.49 Beta
5. Reboot system.
IMPORTANT - Once system boots open SuperSU and change "Default Access" to "Grant"
FF Installation
Flash Fire Instructions for Roms before OC1
Required Files
Download stang5litre Ultra Note5 NON-MDK Rom.zip
Download OC1_Firmware.zip https://www.androidfilehost.com/?fid=24052804347795416
Download OC1 SS/FF Flashable Kernel.zip
Download SuperSU v2.49 Beta
1) Install FlashFire if you don't already have it
2) Hit the "+" button and select Wipe (Select System Data, 3rd Party Apps, Dalvik and Cache)
3) Hit the "+" button and select "Flash ZIP or OTA"
4) Add stang5litre Ultra Note5 NON-MDK.zip
5) Add OC1_Firmware.zip
6) Add OC1 SS/FF Flashable Kernel.zip
7.Add SuperSU v2.49 Beta
8) Leave "Auto-Mount" unchecked and make sure EverRoot is disabled
9) Make sure the order is Wipe, ROM, OC1_firmware, Kernel, SuperSU v2.49 Beta then press the lighting bolt and hit "OK"
10) Phone will reboot and FlashFire will do its thing
11) Phone will reboot again and sit at Samsung screen for a few minutes (be patient) before starting the Setup Wizard
IMPORTANT - Once system boots open SuperSU and change "Default Access" to "Grant"
OC1 Installation
OC1 Instructions
1)You want to get root by using KingRoot
http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
2)After Confirming Root You Know Need To Swap KingRoot To SuperSU
Follow instructions on link.
http://zidroid.com/how-to-get-ride-and-replace-kinguser-with-supersu-app/
3)After Confirming You have SuperSU is installed and still have root you will need to get FlashFire Beta(**Please Read Their Page On How to Properly Get FlashFire**)
http://forum.xda-developers.com/general/paid-software/flashfire-t3075433
4)Install FlashFire and Confirm You Have the App installed. Should be Red with a Lightning Bolt
5) Required Files
- stang5litre Ultra Note5 NON-MDK ROM
- stang5litre Ultra Note5 SafeStrap Kernel
- BETA-SuperSU-v2.49
https://www.androidfilehost.com/?fid=24052804347793715
6) Hit the "+" button and select Wipe (Select System Data, 3rd Party Apps, Dalvik and Cache)
7) Hit the "+" button and select "Flash ZIP or OTA"
8) Add stang5litre Ultra Note5 NonMDK v3.zip
9) Add OC1 SS/FF Flashable Kernel.zip
10) Add UPDATE-SuperSU-v2.49 Beta.zip
11) Leave "Auto-Mount" unchecked and make sure EverRoot is disabled
12) Make sure the order is Wipe, ROM, Kernel, UPDATE-SuperSU-v2.49 Beta then press the lightning bolt and hit "OK"
13) Phone will reboot and FlashFire will do its thing
14) Phone will reboot again and sit at Samsung screen for a few minutes (be patient) before starting the Setup Wizard.
15) IMPORTANT - Once system boots open SuperSU and change "Default Access" to "Grant"
OF1 Installation
OF1 Instructions
Required Files
- stang5litre Ultra Note5 NON-MDK ROM
- VZW_OF1_WifiFix.zip(Has Kernel Built in
https://www.androidfilehost.com/?fid=24269982086999420
- BETA-SuperSU-v2.49
https://www.androidfilehost.com/?fid=24052804347793715
1) Open Flash Fire
2) Hit the "+" button and select Wipe (Select System Data, 3rd Party Apps, Dalvik and Cache)
3) Hit the "+" button and select "Flash ZIP or OTA"
4) Add stang5litre Ultra Note5 NonMDK v3.zip
5) Add VZW_OF1_WifiFix.zip (Which Includes Kernel in it Thanks to @klabit87)
6) Add UPDATE-SuperSU-v2.49 Beta.zip
7) Leave "Auto-Mount" unchecked and make sure EverRoot is disabled
8) Make sure the order is Wipe, ROM, VZW_OF1_WifiFix.zip, SuperSU-v2.49 Beta then press the lightning bolt and hit "OK"
9) Phone will reboot and FlashFire will do its thing
10) Phone will reboot again and sit at Samsung screen for a few minutes (be patient) before starting the Setup Wizard.
11) IMPORTANT - Once system boots open SuperSU and change "Default Access" to "Grant"
Attention All Devs You Are Not Allowed To Take My Work Without My Permission!!!
Known Issues:
None
Mods v1:
- Replaced All Icons with Newer Pack from the most recent Marshmallow (Fully Themed 6.0.1)
- Marshmallow SBrowser
- N5 5.1.1 Gallery Full working
- Messaging App Themed like MM
- Music themed like Marshmallow
- New TouchWiz without Shadows under icons
- Accuweather from 5.1.1 themed like Marshmallow
- Accuweather clock without shadows
- Added Video Editor now working with camera and gallery
- Fixed SPlanner Framework Preview Issue
- Lockscreen Clock without shadows
- Added Blur People Edge and Apps (Marshmallow Mod for Settings Icon)
- Theme Store from Marshmallow (+Theme Center)
- Galaxy Apps from Marshmallow
- Fixed Custom Wallpaper + None Screen Lockscreen Effect
- Added New Updated Marsmhallow Shorcuts to Lockscreen
- Air Command Settings Marshmallow Mod + Blur
- Added Boot Animation from Marshmallow + Sounds
- Updated all Third Party Apps with Icon from v2.0 Icon Pack
- Added N5 SVoice [Marshmallow Themed] with Air Command Fully Fixed
- Added Live Clock Fix for Marshmallow Launchers
- New S6 Camera [New Icons from MM]
- Fixed SystemUI preview image at lockscreen in shortcuts
- Replace entire icon pack with 6.0 Touchwiz icons
- Added Note 5 Phone and Contacts with video call enable (thanks to JASONRR and alemtro)
- Themed Phone app like 6.0 MM
- Themed Contacts app like 6.0 MM
- Themed Message app like 6.0 MM
- Fully themed framework with MM 6.0 elements and color scheme (thanks to Gabri98)
- Added new 6.0 TouchWiz animation for opening/closing apps
- Themed Settings app like 6.0 MM
- Update Touchwiz with latest 6.0 PNGs and color for folders
- Fixed black background in settings of launcher thanks to Martillero
- Themed Clock app like 6.0 MM
- Themed Music app like 6.0 MM (thanks to ManuPRO and Brylle)
- Added N5 Video app and Video Player with popup function (thanks to alemtro)
- Added S6 MM 6.0 Calculator
- Added Exclusive icons for MM Power menu
- Added People/Apps Edge and Wave Notification Edge from S6 Edge Plus
- N5 Air Command with full finger swipe + Memo App working + Screen writing function
- Added 6.0 MM Scrapbook
- Added Rounded icons for some 3rd party apps (Smart Remote, Air command,...)
- Themed Air Command like 6.0 MM (thanks to djraz)
- Added Exclusive S6 6.0 MM Setupwizard (setup after a wipe data)
- Themed Memo app like 6.0 MM
- Added Multi-language for some missing apks (missing call, wifi direct menu, NFC one and more)
- Fully themed SystemUI and lockscreen like 6.0 MM
- Fixed crash in long list for My Files
- Added LTE Only voice in mobile data menu
- Added Busybox
- Mod'd Home Screen for Continuous Scrolling
- Mod'd App drawer for Continuous Scrolling
- Mod'd SystemUI for 3 minit batt
- Mod'd Framework for All rotations 360
- Mod'd Locksreen for All rotations 360
- Rounded Notations On Drop Down
- All sensors have been fixed :good:
- Debloated Even more
- 5 way Reboot Menu
- Added Viper For Better Audio
- Added Noxide For Better Audio
- Knox removed
Build Prop Edits
Battery saving without reducing performance**
Enabled Fast Boot**
Changed Boot Animations FPS for crisper look and a lot smoother**
Signal Enhancer**
Quicker Connection on Dial out. Reduced Time(Rings faster instead of the usual pause)**
Kernel:
@klabit87 AIO (Baked In) Original Thread LINK
Download Kernels
- Hybridmax 2.5
https://www.androidfilehost.com/?fid=24052804347793698
-Klabit87 AIO (Stock with charge fix)
https://www.androidfilehost.com/?fid=24391638059057826
-Klabit87 AIO R3 (Faux Audio Mod,Voltage Control, Gov Control, I/O Control, Etc See Link for all info)
https://www.androidfilehost.com/?fid=24385658843824953
Download SuperSU v2.49 Beta
https://www.androidfilehost.com/?fid=24052804347793715
Notes:
-The ROM will not update your Modem
-The Rom will update System to OC1 and will Auto-loki the Kernel.:good:
- Verizon splash screen has been removed
- All Verizon apps removed, Knox, and All Amazon apps etc.
- You will sit on the Samsung splash screen
- This is for phones with MDK/FF/SS/OC1 Bootloader
- This ROM does not change your bootloader
Disclaimer:
This Rom is able to be installed on the Galaxy S4 Using a MDK,SS,FF Custom Recovery.
I am not responsible for anything that may happen or happens to your phone as a result of this custom firmware/Rom. You are choosing to install this yourself and thus assume any/all risks involved
I HOPE YOU LIKE IT :fingers-crossed:
Donate To Help Keep Me Up For Future Builds And Mods, not necessary, but
Greatly Appreciated!!!

Credits: @klabit87-Testing&Helping, NC5 Flasher, Update.zip
@Albe95-For Permission to use N5 rom as a base!! Original Thread Link
@jam0688-Testing @mugsy77- For Testing All Day for Me
 @Chainfire- For SuperSU
Follow Me On:
Twitter: @stang5litre
G+: @stang5litre1
Facebook: @stang5litre
XDA:DevDB Information
stang5litre Ultra Note5, ROM for the Verizon Samsung Galaxy S 4
Contributors
stang5litre
ROM OS Version: 5.1.x Lollipop
Based On: TouchWhiz
Version Information
Status: Stable
Current Stable Version: 03/11/16
Stable Release Date: 2016-03-11
Created 2016-03-12
Last Updated 2016-03-11

Awesome work on this! Great to have a variety

How do you think install would go using superSu 2.66 Beta? I'm running it as system app on v3 but didn't know if I should mess with install and add newer SU version after.

Tech 4 9 said:
How do you think install would go using superSu 2.66 Beta? I'm running it as system app on v3 but didn't know if I should mess with install and add newer SU version after.
Click to expand...
Click to collapse
As long as it's a zip it won't matter

(omigodomigodomigod....clapping and sit-hopping) ...SO EXCITING! Thanks Stang. See you on the other side! (ya mean I gotta set up Wanam and lmt AGAIN?! <--first world problems)

Well first attempt yielded good boot up but no cell/mobile signal. It kept trying...no sig...a little sig....no sig. Could be blamed on trying su 2.66 I guess...
Thoughts?

Tech 4 9 said:
Well first attempt yielded good boot up but no cell/mobile signal. It kept trying...no sig...a little sig....no sig. Could be blamed on trying su 2.66 I guess...
Thoughts?
Click to expand...
Click to collapse
I don't see superSU doing that but try it. You should be have signal for sure. I'm on it and two others
That's this rom

Of course I had to give this a try and I wasn't dissapointed as always. Everything worked like a charm first try. only question I have so far is, on top left corner of the lock screen it says sprint, anyway of changing that?

steepdgaf said:
Of course I had to give this a try and I wasn't dissapointed as always. Everything worked like a charm first try. only question I have so far is, on top left corner of the lock screen it says sprint, anyway of changing that?
Click to expand...
Click to collapse
Just go into the build prop and change it to the Verizon Variant. I'll fix that. Sorry about that lol.
And if you use xposed Wanam will out whatever you want there

Ayyy you all will love this ROM...

stang5litre said:
Just go into the build prop and change it to the Verizon Variant. I'll fix that. Sorry about that lol.
And if you use xposed Wanam will out whatever you want there
Click to expand...
Click to collapse
No problem sir, I'll never be as smart as you so I only ask to learn and hopefully help others along the way.

steepdgaf said:
No problem sir, I'll never be as smart as you so I only ask to learn and hopefully help others along the way.
Click to expand...
Click to collapse
Anyine can learn it [emoji2]. So no worries at all

Second attempt same result. Have signal for short time during boot then drops after about 10 sec. Any help appreciated.
And this was clean install with su 2.49.
Oh and it says something about no sim card in top left.

Tech 4 9 said:
Second attempt same result. Have signal for short time during boot then drops after about 10 sec. Any help appreciated.
And this was clean install with su 2.49.
Oh and it says something about no sim card in top left.
Click to expand...
Click to collapse
So it's not detecting you sim for some reason . Have you taken out your sim and out it back in?

I didnt think of that. Sim has not been out of phone EVER since ive owned it. Think I should try again only remove and reinsert to see if it recognizes it?

Hi mr. Stang support international language or now...

OK so another fail but I learned more. The FIRST thing that happens upon boot is I get android.process.media has stopped. I hit OK on it maybe twice at most and it seems to go away. The next thing is, I have good mobile/cell signal UNTIL I agree to Samsung license agreement and when searches for signal...poof signal gone. Did factory wipe...have signal back until agreeing to Samsung thing again then gone again like a light switch. I even powered down, removed batt and pulled sym card for a few seconds. No avail. Any help appreciated.

So after first makin the mistake of flashing the mdk version instead of the non-mdk version, (yeah i know complete noob mistake what made it so bad was i did it twice). I ran into the same problems as tech49, as soon as i agree to the samsung license agreement i lose signal and it comes and goes so fast after that i dont know what to do. I also had the android.process.media issuse as well. I did play around with the rom and love the look and feel of it just gotta figure out the issues.

Same as Tech. No signal. No wifi. no data. Can I download flashfire and install it then restore from my backup?

Same with me, no data/ service. WiFi works for me. Clean install. When I goto settings network>status..occasionally sprint pops up then back to no service (I'm on Verizion). Hope this gets works out as I love the look of this versions!
I tried to restore a back up with FF but stuck at sammy custom screen. Guess it's time to break out the laptop, lol.

[ROM][ROOT][STOCK][7.0] v2 Samsung Tab A 2016 10.1 (SM-P585Y/SM-P580), Jul 23, 2017

Greetings!
ROMs for the two variants of the Samsung Galaxy Tab A (2016, 10.1") with S Pen:
WiFi+Cellular (SM-P585Y) gtanotexllte (other variants, SM-P585, SM-P585N0, SM-P585M etc. not tested for ROM compatibility)
http://www.samsung.com/sg/tablets/galaxy-taba-p585/SM-P585YZWAXSP/WiFi only (SM-P580) gtanotexlwifi (even this has not been tested since I don't have this device)
http://www.samsung.com/us/business/support/owners/product/SM-P580NZKAXAR
Disclaimer: No warranties, stated or implied. Flashing a custom ROM might void your warranty. If you download the ROM & use it, you do so at your own risk. The author or XDA are not liable for any issues arising out of the usage of this ROM.
Different people have different requirements, so I have made available two versions of the ROM:
- Lite (heavily debloated with almost all Samsung apps removed, since I don't use them)
- Full (No debloat/no apps removed, apart from Knox)
Current version - Nougat 7.0 ROM v2 (rooted with Magisk 13.3)
Download Nougat 7.0 ROM v2 for SM-P580 WiFi only
Lite: Google Drive
Full: Google Drive
Download Nougat 7.0 ROM v1 for SM-P585Y WiFi+Cellular
Lite: Google Drive
Full: Google Drive
Previous versions - Marshmallow 6.0.1 ROMS (no further development):
Download Marshmallow 6.0.1 ROM v2 for SM-P585Y WiFi+Cellular (its somewhere between lite & full)
Mega, Mediafire, Dropbox,
Download Marchmallow 6.0.1 ROM v1 for SM-P580 WiFi only
Lite: Dropbox
Full: Dropbox
(Additional disclaimer: I don't have the WiFi only tab, so I cannot test this ROM. It underwent the same process as the WiFi+Cellular model, which I do have, so it should be okay. If you encounter any issues, please let me know.)
Pre-requisites:
Enable Developer options by going to Settings -> About device -> Software info -> click 7 times on 'Build number'.
Now go to Settings -> Developer options -> Turn on 'OEM Unlock' & 'USB Debugging' if not already done so.
Caution: The stock ROM has Verifed Boot enabled with device-mapper-verity (dm-verity) kernel feature, which prevents a successful bootup if it detects any modification to the original setup. See details. This needs to be disabled if you need to install a custom recovery, or a custom ROM.
Download dm-verity disabler:
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
Download TWRP recovery:
LTE version - https://twrp.me/devices/samsunggalaxytaba101lte2016spen.html
WiFi version - https://twrp.me/devices/samsunggalaxytaba101wifi2016spen.html
Instructions - Install TWRP Recovery & flash DM-Verity disabler:
Transfer the downloaded file 'no-verity-opt-encrypt-5.1.zip' to SD card or OTG USB drive.
Download Odin 3.12.3 or any recent version.
Shutdown your tab.
Use Power+Volume Down+Home to reach the Download screen & then press Volume Up to confirm.
Use the AP section to flash the TWRP recovery.
After installing TWRP via Odin, uncheck auto reboot & manually go into TWRP to install the file 'no-verity-opt-encrypt-5.1.zip'
THEN, format /data, DON'T wipe it.
Booting to the stock ROM AFTER installing TWRP without doing this will show you a Verification failed warning, asking you to reset to factory defaults, since you basically overwrote Samsung's default recovery with TWRP, so it is cross with you.
Instructions - Install ROM:
Copy ROM to SD card or OTG USB drive (TWRP can have issues reading the internal storage)
Insert the SD card or OTG USB drive into the tab (very important!)
Press Power + Volume Up + Home & keep them pressed till you reach the TWRP splash screen
Swipe right to allow modification
Install 'no-verity-opt-encrypt-5.1.zip' from SD card or OTG USB drive
Format /data
From Advanced Wipe, wipe Dalvik/ART Cache, System, Internal Storage & Cache
Install the ROM, no need to wipe again since we already wiped & formatted in TWRP
Remember to remove the tick mark against reboot before clicking next, do NOT reboot yet!
Wipe Dalvik/ART cache (yes, again, after ROM install)
NOW, Reboot
Let the ROM boot, give it time
Install any extra applications you need
Bugs/Limitations & Workarounds:
Some APKs have been removed as part of the deknox/debloat, however, the appropriate system level modifications have not been touched in order to remain as close to stock as possible. So if you try to change a setting which relies on the removed feature, the appropriate app might force close, or it may continue to wait for the missing app. This is expected. Currently I have no plans to correct this behavior.
Software updates will not work.
Google Play Services might force close, so you will need to update it.
Samsung notes may force close out of the box. Just update it from Google Play Store. It will work after that. (zayi)
Accessibility service doesn't work on the debloated/lite ROM. Just use any third party keyboard like Swiftkey/Google Gboard etc & then enable the service for the application you desire. (zayi)
ROM features: See post # 2
Extra recommendations for ROM & App recommendations: See post # 3
XPOSED (was only tested on Marshmallow 6.0.1 ROM, NOT on Nougat 7.0):
Xposed framework v86.1 (you can then upgrade to v87)
Xposed Installer v3.1
Xposed modules & other stuff
Credits/Thanks:
IAM_TheFlash for the inspiration & advice
Assayyed for Assayyed Kitchen, using which this ROM was built, along with the numeroud features of the kitchen, including the app debloat list
zayi for the excellent feedback & solutions to the problems the ROM causes.
AndroidSword for the invaluable guide.
zxz0O0 for the download tool.
XDA community for the platform
Samsung/updato.com/Samsung Updates Live/Alfafile/MrCrab for the ROM
ROM Screenshots for SM-P585Y attached for the Home screen, Applications & Software Info.
None for SM-P580, since I don't have the tab to test.
--
Jp

Current Nougat 7.0 Releases:
SM-P585Y Changelog::
v2:
Based on stock Nougat 7.0 XSA (Australia) firmware build P585YDXU1BQF1 from June 2, 2017
Android security patch level May 1, 2017
Deodexed
Zipaligned
Rooted with Magisk v13.3
SU.d support
Busybox installed
Build.prop tweaks
Init.d support
Ext4-TuneFS scripts
Knox removed
SQLite script
ADB Connect/SysRO SysRW scripts
Debloated (Lite version, see attachment v3 for details of APK's removed)
SM-P580 Changelog::
v1:
Based on stock Nougat 7.0 XAR (United States) firmware build P580UEU1BQE4 from June 13, 2017
Android security patch level May 1, 2017
Deodexed
Zipaligned
Rooted with Magisk v13.3
SU.d support
Busybox installed
Build.prop tweaks
Init.d support
Ext4-TuneFS scripts
Knox removed
SQLite script
ADB Connect/SysRO SysRW scripts
Debloated (Lite version, see attachment v3 for details of APK's removed)
Old Marshmallow 6.0.1 Releases:
SM-P585Y Changelog::
v2:
Added some of the stuff back, since it was not playing nice with /data format
Investigated Xposed compatibility & added links for Xposed framework, installer & modules
Updated instructions
v1/baseline:
Based on stock firmware build P585YDXU1API1
Android security patch level September 1, 2016
Deodexed
Zipaligned
Systemless pre-root with SuperSU
Busybox installed
Build.prop tweaks
Init.d support
Knox removed
SQLite script
ADB Connect/SysRO SysRW scripts
SU.d support
Heavily debloated (See attachment for details of APK's removed)
Ext4-Tune2FS scripts
SM-P580 Changelog::
v1:
Based on stock firmware build P580ZSU1APJ3
Android security patch level September 1, 2016
Deodexed
Zipaligned
Systemless pre-root with SuperSU
Busybox installed
Build.prop tweaks
Init.d support
Knox removed
SQLite script
ADB Connect/SysRO SysRW scripts
SU.d support
Heavily debloated lite version & almost stock full version (See attachment for details of APK's removed in lite)
Ext4-Tune2FS scripts
Jp

Extra recommendations for the tab:
Since SM-P585Y doesn't have a huge internal storage, just 16 GB, out of which, only ~9 GB is left for the user, you may want to use adoptable storage to use your SD card as internal storage. Go to this thread by ashyx to enable adoptable storage, whereby you have the option to convert your SD card as an internal storage unit: http://forum.xda-developers.com/galaxy-tab-a/how-to/patch-adoptable-storage-enabler-t3507387. The only caveat is that it formats & converts the whole SD card for use as internal storage & you won't be able to pop the card out & use it on your PC to transfer data, you will need to transfer data via the USB cable just like you would for the internal storage.
Go to Developer options & turn off Windows, Transitions & Animator animations. It would visibly speed up your tab slightly by cutting down on the slight delay introduced by the animations.
App recommendations (Free in Play Store):
'Xodo PDF Reader & Editor' for PDF annotation
'INKredible - Handwriting Note' for taking notes with guaranteed beautiful handwriting
Jp

Can we instal xposed in these ROM?

Gosh, saw a stock rom for the s pen model and got excited, until I saw it was the P585 only =[
Merry Christmas LTE guys!

zayi said:
Can we instal xposed in these ROM?
Click to expand...
Click to collapse
I went too far in my debloating, which doesn't play nice with formatting /data, so I've added some stuff back & christened the new ROM v2. Uploading, should be up shortly. I've installed Xposed on it. Looks okay.
EDIT: New ROM v2 uploaded.
I don't use Xposed much, however, I was able to install:
Xposed framework ver 86.1
Xposed Installer ver 3.1
Modules: Xposed edge & Gravitybox (MarshMallow)
It seems to be behaving itself, don't see any errors in my rudimentary testing.
Jp

veekay said:
Gosh, saw a stock rom for the s pen model and got excited, until I saw it was the P585 only =[
Merry Christmas LTE guys!
Click to expand...
Click to collapse
LOL, Merry Christmas, WiFi folks.
I don't think there's much difference between the WiFi & LTE models apart from the SIM module , so if you're feeling brave, you can try to install it.
Otherwise let me try to look up the WiFi ROM & cook t the same way. Your tab would have to be the guinea pig though.
By the way, which is the software version for P580? I saw this one online: P580KXU1APJ1 from November 2016. Any release after that?
Jp

japinder said:
I went too far in my debloating, which doesn't play nice with formatting /data, so I've added some stuff back & christened the new ROM v2. Uploading, should be up shortly. I've installed Xposed on it. Looks okay.
EDIT: New ROM v2 uploaded.
I don't use Xposed much, however, I was able to install:
Xposed framework ver 86.1
Xposed Installer ver 3.1
Modules: Xposed edge & Gravitybox (MarshMallow)
It seems to be behaving itself, don't see any errors in my rudimentary testing.
Jp
Click to expand...
Click to collapse
Wow... ty so much. Download it and will try it today...thanks brother

Seems P580UEU1APH6 as far as XAR release.
BTW, does this get rid of the S pen features?
japinder said:
LOL, Merry Christmas, WiFi folks.
I don't think there's much difference between the WiFi & LTE models apart from the SIM module , so if you're feeling brave, you can try to install it.
Otherwise let me try to look up the WiFi ROM & cook t the same way. Your tab would have to be the guinea pig though.
By the way, which is the software version for P580? I saw this one online: P580KXU1APJ1 from November 2016. Any release after that?
Jp
Click to expand...
Click to collapse

my Samsung Notes stopped working. and always show notification "unfortunately, samsung notes has stopped". any idea what happen?

zayi said:
my Samsung Notes stopped working. and always show notification "unfortunately, samsung notes has stopped". any idea what happen?
Click to expand...
Click to collapse
Yes, that is an acknowledged bug.
However, I recently installed Xposed framework, Xposed installed & a couple of Xposed modules. Afterwords I again applied the dm-verity & no-ecryption zip and then again formatted data. Now Samsung Notes is back up running. Wondering, whether that has anything to do with Xposed, or the data format...
If you haven't setup a ton of apps, maybe you can just try to install the zip & format data to see if Samsung Notes works... However, it will mean starting from scratch again in terms of setting up your tab...
Jp

japinder said:
Yes, that is an acknowledged bug.
However, I recently installed Xposed framework, Xposed installed & a couple of Xposed modules. Afterwords I again applied the dm-verity & no-ecryption zip and then again formatted data. Now Samsung Notes is back up running. Wondering, whether that has anything to do with Xposed, or the data format...
If you haven't setup a ton of apps, maybe you can just try to install the zip & format data to see if Samsung Notes works... However, it will mean starting from scratch again in terms of setting up your tab...
Jp
Click to expand...
Click to collapse
Sry. after i update samsung notes via google play store that fix those problem. ty for your time. nice job for these rom.

zayi said:
Sry. after i update samsung notes via google play store that fix those problem. ty for your time. nice job for these rom.
Click to expand...
Click to collapse
LOL, that must have been it for me too, updating apps.
Thanks for the confirmation, updated first post.
Jp

Can you try to go to accessibility>vision>tts . I need to activate accessibility of some apps, but can't get through these tts. Make setting force close

zayi said:
Can you try to go to accessibility>vision>tts . I need to activate accessibility of some apps, but can't get through these tts. Make setting force close
Click to expand...
Click to collapse
Sorry, I removed TTS in my haste to debloat the ROM, since I don't use it.
I guess if you do need it, maybe I can upload another version of the ROM with zero debloat, which doesn't have any apps removed. It would be same as stock in terms of apps, but you still have the other features.
Let me know.
Jp

japinder said:
Sorry, I removed TTS in my haste to debloat the ROM, since I don't use it.
I guess if you do need it, maybe I can upload another version of the ROM with zero debloat, which doesn't have any apps removed. It would be same as stock in terms of apps, but you still have the other features.
Let me know.
Jp
Click to expand...
Click to collapse
OK I will wait for it. Ty

veekay said:
Gosh, saw a stock rom for the s pen model and got excited, until I saw it was the P585 only =[
Merry Christmas LTE guys!
Click to expand...
Click to collapse
veekay said:
Seems P580UEU1APH6 as far as XAR release.
BTW, does this get rid of the S pen features?
Click to expand...
Click to collapse
I've created two ROMs for the WiFi model, based off the build P580ZSU1APJ3:
- Lite (heavily debloated, with almost all Samsung apps removed, Air Command removed too)
- Full (only Knox removed, all other apps remain as it is, Air Command works)
So now both 2016 S-Pen tab models are equally represented. No partiality any longer.
Jp

Appreciate the work. Is it possible to have a lite version with just the s-pen functionality left in or is that dependent on too many other apps? Or, is there an apk that can be downloaded to re-enable air command?
japinder said:
I've created two ROMs for the WiFi model, based off the build P580ZSU1APJ3:
- Lite (heavily debloated, with almost all Samsung apps removed, Air Command removed too)
- Full (only Knox removed, all other apps remain as it is, Air Command works)
So now both 2016 S-Pen tab models are equally represented. No partiality any longer.
Jp
Click to expand...
Click to collapse

veekay said:
Appreciate the work. Is it possible to have a lite version with just the s-pen functionality left in or is that dependent on too many other apps? Or, is there an apk that can be downloaded to re-enable air command?
Click to expand...
Click to collapse
LOL, thanks. Its just selective debloat. Just more work, that's all.
These are APK's, but system apps, not user apps, so normal install like other apps may not work as intended, might be more messy, even if it works.
Air Command, the feature to pop up a selection of commands targeted towards the S Pen, is not a feature I find terribly useful. When I take out the S Pen, I use it for two purposes:
- Take handwritten notes with INKredible app.
- Annotate PDF's with Xodo.
Air Command just gets in the way, I have to dismiss it, causing one more S Pen click or back button key press. And keeps on showing the translucent button, which I can sometimes press inadvertently. Apart from Clock (I just like the white icon by Samsung, instead of horrible pale purple clock icon by Google), I just replace all the Samsung apps with the ones by Google. Hence the heavily debloated approach. I understand, Samsung Notes, with it OneNote like functionality might appeal to some people, the automatic prompt might appear cool too, even if its not for me.
Let me see what I can do, maybe a third, not-so-lite & not-so-full ROM. No ETA's though.
Jp

The tablet is my wifes and she uses this feature on the tab and her note - wouldn't be able to convince her to switch to a slimmed down rom without it
japinder said:
LOL, thanks. Its just selective debloat. Just more work, that's all.
These are APK's, but system apps, not user apps, so normal install like other apps may not work as intended, might be more messy, even if it works.
Air Command, the feature to pop up a selection of commands targeted towards the S Pen, is not a feature I find terribly useful. When I take out the S Pen, I use it for two purposes:
- Take handwritten notes with INKredible app.
- Annotate PDF's with Xodo.
Air Command just gets in the way, I have to dismiss it, causing one more S Pen click or back button key press. And keeps on showing the translucent button, which I can sometimes press inadvertently. Apart from Clock (I just like the white icon by Samsung, instead of horrible pale purple clock icon by Google), I just replace all the Samsung apps with the ones by Google. Hence the heavily debloated approach. I understand, Samsung Notes, with it OneNote like functionality might appeal to some people, the automatic prompt might appear cool too, even if its not for me.
Let me see what I can do, maybe a third, not-so-lite & not-so-full ROM. No ETA's though.
Jp
Click to expand...
Click to collapse

[ROM][PORT][SM-T580][SM-T585] TW Port 9.0 Pie ONE UI from SM-A600N 20190316

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip - firmware
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware
Information
My port based on:
firmware: A600NKSU1ZSB6 (Korea version SM-A600N) Android 9.0 with February security patch
kernel: T585XXU4CRJ8 (our stock 8.1 kernel) 3.18.14
As you known - in friday (1 March 2019) was opened beta testing for A6'18 in Korea. It has the same exynos 7870.
@gyogubin public twrp backup with 9.0 stock firmware (all beta versions send as ota update, we don't have clean firmware) https://forum.xda-developers.com/galaxy-a6/how-to/south-korea-twrp-backup-copy-a600n-t3906026
1. the same treble logic - vendor as /cache partition and cache as /hidden partition
2. wifi and bt from lineage (I build special 32bit version to get right libs for port)
3. gps, audio config and etc from our stock 8.1
4. small fixes for camera to get it work
Root
This firmware was with magisk. I.e. boot.img already patched.
If you need magisk - you just need install Magisk+Manager_v7.0.0.apk, install, open manager, then reboot firmware and reopen manager
Do not try install Magisk-v18.1.zip - you will get bootloop
Work
Almost everything works, but you have to remember that this is beta version
Problems
1. keyboard - this is port from phone, it use phone layout. I can set ro.build.characteristics=tablet, but it will cause problems with add languages in samsung keyboard app
Hints
1. rotate home screen - open "Home sccreen settings" and activate "Rotate to landscape mode"
2. battery percentage - open "Settings"-"Notifications"-"Status Bar" and activate "Show battery percentage"
3. hide virtual keys - open "Settings"-"Display"-"Navigation bar" and activate "Full screen gestures". And then you can turn off "Gesture hints".
Version info
4. 20180316:
- update kernel (our old is 3.18.14, new one is: 3.18.91)
- update wifi driver (it's depend of kernel, now in new update wifi as part of new kernel, I rebuild special 32bit lineage for new wifi hal with new wifi driver support)
- vibrator is back for t585
3. 20180306:
- fix mtp
- fix flip
- fix keystore (thanks @ananjaser1211)
- update kernel to use new video driver (r28 mali) (thanks @ananjaser1211)
2. 20180305:
- remove a lot of garbage, leave only minimum, decrease system size from 2.5gb to 2gb, all zip less, then 1.3gb
- initial version for SM-T580 (I cannt do only wifi version, because it's strong depends in framework, but in scripts now noril, fix for cbd, update gps (gpsd, gps.default.so and gps.cfg))
1. 20180303:
- initial version
SM-T580
3. 20180316: new kernel, new wifi - this is small update, not full firmware, if you install from zero - install 20180306 first and then 20180316 update: https://drive.google.com/file/d/1QJfPfpDuWmFRDpsK8tmZLIleHHTJ0pND/view?usp=sharing
2. 20180306: fix mtp, fix keystore (samsung account, lockscreen), update video driver up to r28: https://drive.google.com/file/d/1awbjuwbFqmZo5CgmruMkYL9DUhSlLn3c/view?usp=sharing
1. 20180305: https://drive.google.com/file/d/1Hr9PZV6UbohnOZC4LjxHRCoxqxHjJ1u2/view?usp=sharing
SM-T585
4. 20180316: new kernel, new wifi - this is small update, not full firmware, if you install from zero - install 20180306 first and then 20180316 update: https://drive.google.com/file/d/1smcl_EQeGz3ShR3CdgVqN6D78rhE0KwX/view?usp=sharing
3. 20180306: fix mtp, fix keystore (samsung account, lockscreen), update video driver up to r28: https://drive.google.com/file/d/13rIhvdOyA4UOAPW9XTC_qzyVphdnsHOV/view?usp=sharing
2. 20180305: https://drive.google.com/file/d/1ZDoTvVKSr5xn04-9coJRFkk7jngQJYP2/view?usp=sharing
1. 20180303: https://drive.google.com/file/d/1QCzbhhI3I7SINYO3CpeIX4SVwT9CZoL5/view?usp=sharing
Thanks
Samsung

Wow Valera! Awesome work!
I will wait for the version for t580 if there will be any haha very anxious
Thanks

Also waiting for the T580 wifi Variant

well I could not wait and also install on the t580. Rom is quite fast and has the errors that Valera mentioned. is definitely a good port beyond that some things like the size corresponds to the galaxy a6 and does not suit tablet mode. I hope you can carry a tablet for more adaptation. Beyond everything, it's great and although it takes a few minutes, it pleases me a lot. Hopefully you can make the zip for t580 even if it's a lot of asking a lot of thanks!

Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip - firmware
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware
Information
My port based on:
firmware: A600NKSU1ZSB6 (Korea version SM-A600N) Android 9.0 with February security patch
kernel: T585XXU4CRJ8 (our stock 8.1 kernel) 3.18.14
As you known - in friday (1 March 2019) was opened beta testing for A6'18 in Korea. It has the same exynos 7870.
@gyogubin public twrp backup with 9.0 stock firmware (all beta versions send as ota update, we don't have clean firmware) https://forum.xda-developers.com/galaxy-a6/how-to/south-korea-twrp-backup-copy-a600n-t3906026
1. the same treble logic - vendor as /cache partition and cache as /hidden partition
2. wifi and bt from lineage (I build special 32bit version to get right libs for port)
3. mali driver, gps, audio config and etc from our stock 8.1
4. small fixes for camera to get it work
Root
This firmware was with magisk. I.e. boot.img already patched.
If you need magisk - you just need install Magisk+Manager_v7.0.0.apk, install, open manager, then reboot firmware and reopen manager
Do not try install Magisk-v18.1.zip - you will get bootloop
Work
Almost everything works, but you have to remember that this is beta version
Problems
1. keyboard - this is port from phone, it use phone layout. I can set ro.build.characteristics=tablet, but it will cause problems with add languages in samsung keyboard app
Hints
1. rotate home screen - open "Home sccreen settings" and activate "Rotate to landscape mode"
2. battery percentage - open "Settings"-"Notifications"-"Status Bar" and activate "Show battery percentage"
3. hide virtual keys - open "Settings"-"Display"-"Navigation bar" and activate "Full screen gestures". And then you can turn off "Gesture hints".
Version info
3. 20180306:
- fix mtp
- fix flip
- fix keystore (thanks @ananjaser1211)
- update kernel to use new video driver (r28 mali) (thanks @ananjaser1211)
2. 20180305:
- remove a lot of garbage, leave only minimum, decrease system size from 2.5gb to 2gb, all zip less, then 1.3gb
- initial version for SM-T580 (I cannt do only wifi version, because it's strong depends in framework, but in scripts now noril, fix for cbd, update gps (gpsd, gps.default.so and gps.cfg))
1. 20180303:
- initial version
SM-T580
2. 20180306: fix mtp, fix keystore (samsung account, lockscreen), update video driver up to r28: https://drive.google.com/file/d/1awbjuwbFqmZo5CgmruMkYL9DUhSlLn3c/view?usp=sharing
1. 20180305: https://drive.google.com/file/d/1Hr9PZV6UbohnOZC4LjxHRCoxqxHjJ1u2/view?usp=sharing
SM-T585
3. 20180306: fix mtp, fix keystore (samsung account, lockscreen), update video driver up to r28: https://drive.google.com/file/d/13rIhvdOyA4UOAPW9XTC_qzyVphdnsHOV/view?usp=sharing
2. 20180305: https://drive.google.com/file/d/1ZDoTvVKSr5xn04-9coJRFkk7jngQJYP2/view?usp=sharing
1. 20180303: https://drive.google.com/file/d/1QCzbhhI3I7SINYO3CpeIX4SVwT9CZoL5/view?usp=sharing
Thanks
Samsung
Click to expand...
Click to collapse
New updates. Due to exams cant test right now but will do it later i did checked 1st build it nice that bugs are fixed :good:. Will check it after !exams!!!!!!!!

Great job as usual. I haven't been able to find anything wrong. The tablet is more responsive with this Rom rather with the ones built from a lineage base. Do you think that one day we'll have a Dex launcher like the one from the tab s4?
It would be the biggest goal for this tablet.
Again, thanks for your time.

Just curious, is it normal that the setup jumps all the way to sign in for samsung account? It jumps over wifi connections, license agreement, all of the google account setup.

bobfrantic said:
Just curious, is it normal that the setup jumps all the way to sign in for samsung account? It jumps over wifi connections, license agreement, all of the google account setup.
Click to expand...
Click to collapse
Yes, it's a twrp backup because there's no complete firmware yet. By the way, I've found a bug where I can't change the launcher grid size for both home and apps. There is another one where in landscape mode, it is impossible to see all the apps from the launcher because you can't scroll or move to another page.
Both minor bugs solved by installing nova launcher.

ciccio83q said:
Yes, it's a twrp backup because there's no complete firmware yet. By the way, I've found a bug where I can't change the launcher grid size for both home and apps. There is another one where in landscape mode, it is impossible to see all the apps from the launcher because you can't scroll or move to another page.
Both minor bugs solved by installing nova launcher.
Click to expand...
Click to collapse
Aaahhhh ok that explains it. Sure hope that when the official firmware is released that @Valera1978 will do a port of it for the T585/580

Thanks for giving T585 a better life

alanloax said:
well I could not wait and also install on the t580. Rom is quite fast and has the errors that Valera mentioned. is definitely a good port beyond that some things like the size corresponds to the galaxy a6 and does not suit tablet mode. I hope you can carry a tablet for more adaptation. Beyond everything, it's great and although it takes a few minutes, it pleases me a lot. Hopefully you can make the zip for t580 even if it's a lot of asking a lot of thanks!
Click to expand...
Click to collapse
There’s another method that could help you set DPI density to even extreme low or high levels.
https://www.the***********.com/change-dpi-density-android/
Change it to 700 dp

Finally exams are over. Flashed this from yesterday. Every thing's working. Installed google keyboard and pixel launcher. Everything working fine tested stock camera working. Great performance. Thanks for the ROM Valera.

1.Blue light filter is not working

Please port for Tab A6 Spen P585Y.

@Valera1978
How so you get twrp working in oreo? Ich tried my best to get it working 9n the p5xx but tw never recognized the internal andere external SD.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk

Yo valera why does the notification bar look so giant. Can you pls try getting the framework from tab s5e in the next update. So that everything looks fine. i think its bcz you took it directly from a600n

shouldnt the notification panel look like this

wafi_naseem said:
shouldnt the notification panel look like this
Click to expand...
Click to collapse
That screen is 10.5

wafi_naseem said:
shouldnt the notification panel look like this
Click to expand...
Click to collapse
Because this ROM is a port from a phone genius... It's a great base but later Dev might use TAB A 2019 or S4 dump to make it look tablet like as it looks on those models
Sent from my SM-N950F using Tapatalk

Better Mobile App

welcome