Is there some zImage ( kernel ) versions of android 4.0.4 where this solved the power to leave the phone charging the battery sure that when you reach 100% not going to download ?
all kernels I find where the issue of battery charge without supervision is solved are for versions 4.4.2 or 4.4.4 android on bada
If someone can upload or post link to some zImage ( kernel ) versions of android 4.0.4 where this solved the power to leave the phone charging the battery sure that when you reach 100% not going to download I would be very grateful to him.
I'm using a version of android on bada ICS 4.0.4
Related
Hi People I have a Problem that should be easy to solve for most of you ^^.
I have a rootet Galaxy S2 with the following rom on it:
.galaxys2root.com/galaxy-s2-roms/darky-ics-rom-for-rooted-galaxy-s2-gt-i9100-xxlpqofficial-ota/
My Device is running
Android Version: 4.0.3 (Official Samsung Firmware)
BaseBand: I9100xxlph
Kernel: 3.0.15-I9100xxlph-cl118559 [email protected] #3
build: lidroid-resurrection remix ics 9.6 by westcripro.build.version.incremental=xxlph
everything is working fine execpt the batterylife.
in my opinion the last rom (stock) was way better.
so my question is: is there any kernel that matches the rom i am actually using that increases the batterylife ?
at "normal" use my batt is loosing power very fast.
-no gps on
-display turned down
-wifi is not running
i am very new to those things. its my first xp with rooting and modding.
help would be nice.
Chainfire has a CF-root for LPQ. Maybe try that and have a mess about with the voltages?
Sent from my GT-I9100 using XDA
Acording to your device info your on LPH and thats a BETA firmware.Your battery wont get any better until you are running the official release LPQ firmware which has increased quite a lot the battery life in my opinion.Flash the LPQ firmware and an LPQ based custom ROM.
OK so I have an GS2 running:
rom = 20120806 CM9
kernel version = [email protected]#1 SMP PREEMPT Sun Aug 5
Baseband = I9100XXKE7
Android = 4.0.4
Ok so I did the whole Odin thing for the first and only time around March/April updating from GB and haven't touched the kernel version of this phone again so it's quite old. I want to update to CM10 but I'm not sure if all my versions are correct and all the reading I do with kernels slightly confuses me because I'm not sure how it affects my current version as the CF-Root kernel I did ages ago isn't in my 'about phone', so I needed to ask on here because Whirlpool didn't respond.
Can I simply flash CM10 straight over the top? Or do/can I update the kernel version to do this? I would ideally love to have a kernel that optimizes battery life and gives me the ability to have the soft buttons flash for a notification.
I found these threads, are they applicable to my case?
http://forum.xda-developers.com/showthread.php?t=1287726
http://forum.xda-developers.com/showthread.php?t=1311933&highlight=i9100xxke7
Or can someone point me in the right direction because I'm happy to read but I need help narrowing my search to my situation.
Cheers.
You are running CM9 and you want to flash CM10? If yes, then you don't need to flash any kernel to do that.
Just follow these steps:
1. Download latest CM10 nightly and Jellybean Gapps
2. Backup your contacts, messages, and apps
3. Boot to CWM recovery
- Backup your ROM (under Backup and restore (optional)
- wipe data / factory reset
- format /system (under mounts and storage)
- flash CM10
- flash Jellybean Gapps
- reboot phone
Done.
Thanks Jokesy. Much appreciated
Sent from my GT-I9100 using xda app-developers app
Sultan89 said:
OK so I have an GS2 running:
rom = 20120806 CM9
kernel version = [email protected]#1 SMP PREEMPT Sun Aug 5
Baseband = I9100XXKE7
Android = 4.0.4
Ok so I did the whole Odin thing for the first and only time around March/April updating from GB and haven't touched the kernel version of this phone again so it's quite old. I want to update to CM10 but I'm not sure if all my versions are correct and all the reading I do with kernels slightly confuses me because I'm not sure how it affects my current version as the CF-Root kernel I did ages ago isn't in my 'about phone', so I needed to ask on here because Whirlpool didn't respond.
Can I simply flash CM10 straight over the top? Or do/can I update the kernel version to do this? I would ideally love to have a kernel that optimizes battery life and gives me the ability to have the soft buttons flash for a notification.
I found these threads, are they applicable to my case?
http://forum.xda-developers.com/showthread.php?t=1287726
http://forum.xda-developers.com/showthread.php?t=1311933&highlight=i9100xxke7
Or can someone point me in the right direction because I'm happy to read but I need help narrowing my search to my situation.
Cheers.
Click to expand...
Click to collapse
Here is the CM 10 thread for nighty buildshttp://forum.xda-developers.com/showthread.php?t=1794758
I was on MIUI (ICS 4.0.4) and have jumped to Resurrection Remix 3.0.9 and now on Revolt JB 2.5 both of which are based on AOKP and CM10.
I flashed Siyah and then DreamKernel and finally landed on Dorimanx 5.85. So I think you should be okay flashing a new Kernel for your current settings. I would suggest trying out different kernels as there is no best kernel and it depends on your usage. Dormianx has a Battery and Great Battery profile which you can activate via Extweaks app or in recovery. I am not sure about the soft buttons flash though.
Hello, i have upgrade the phone recently to 4.1.2 and then i got a serious probleme with the 3G, so when the 3G is activated and i plug the phone with the computer or an electric source, instead of recharging the battery, i lose it. So i Flashed the kernel with the Siyah kernel and it doesnt work, so i want to backup to ICS so, i'm wondering if first i need to Flash the kernel or not ? or i can Flash ICS despite the fact that the phone has the Siyah kernel for JB ? what i should do to go back to ICS proprely ? thanks
ps : i have an official ROM
ps2: sorry for my bad english.
Battery Quikly drained After Kitkat update EVEN IF I DIDN'T USE THE PHONE
is there any solution for this issue
Baseband : G7102XXUBNH4
Build #: KOT49H.G7102XXUBNH5
Update to the latest version NH6 though in some countries the latest is NI2 but see if you can update it fixes the issue.
Battery backup is preety good then jellybean for me 5:30 + (screen on tim)e for me
Battery back up is pretty much fine for me after NH6 update.
hey all . i have galaxy S2 gt-i9100g and i posted here because i found no Q&A for that .
i have 9100g was on stock 4.1.2 , i flashed a couple roms (CM11 , PA , CRDroid,.......) and now i settled on PA beta6
i have this strange issue when my phone won't charge or recognize a connected USB port , it happens rarely and when it does a reboot is enough to fix it .
Is this software realted (kernel or so ...) or hard ware related ??
Oh and how can i revert back to stock official i found no 4file flash with bootloader and pit so i got afraid i might end up with a brick or a bootloop
please help me guys
Please tell does it have the same issue on other roms? Or are you encountering this issue only on Paranoid Android?
I had about same issue with my i9100. When I charge my phone it stuck at same percent for a while (10 or 20 minutes maybe). My solution is observe your battery voltage with Battery voltage s app and try to charge when battery voltage is at 3500mV.
syedbilal093 said:
Please tell does it have the same issue on other roms? Or are you encountering this issue only on Paranoid Android?
Click to expand...
Click to collapse
i tried alot of roms like CM11 and CR rom and slim cat all had the same issue now after the latest update of CM11 i think the issue is solved 2 days and all is going well .... what do you think could it be kernel related !!
It seems like ...! It occurs due to kernel... i havent experienced such kind of issue but it is a kernel issue.