Related
Experimentation and study
new procedures for Rooting
Sony and Sony Tablet Terminal Phone with ICS
Procedure # 1 →
a - download the file (all)
b - rename the file to update.zip 01 or 02 before inserting them in the root SDcard →
c - go into recovery mode (power + volume) and select System Update from SD CARD
d - select the pack just copied and renamed
and - recovery time from temporary select the pack 03 (does not need to be renamed)
f - if everything is ok now when you restart you'll have root
Code:
NB: two packs were included, because in theory if one does not work the other
I recommend that you first use the 01 because that's what should be "eaten" without problems.
In theory only side effects of this procedure should be the lack of flash pack.
Code:
DOWNLOAD PACK CLAIMS OF CONSCIENCE EVER TAKEN A TEST OF EXPERIMENTAL PROCEDURE AND POTENTIALLY HARMFUL.
WHAT DO YOU DO ONLY AND SOLELY AT YOUR OWN RISK!
The folder in mediafire is empty.
Yer there's nout in the folder.
attached files.
it will not work.
signature is not correct - even not the proper type - it has to be signed for whole-file.
what is the source of the files? you have created them?
what version of cwm recov is included? is it correct for S?
or some 'other-device' one?
I was getting excited then
This procedure for all devices sony and samsung. Samsung also works on the tablet now goes head to head Sony Tablet if someone tells me where to go or not. Could go. It does not install the CWM but does only the Root
Has anyone tested this yet?
anybody successed?
condi said:
it will not work.
signature is not correct - even not the proper type - it has to be signed for whole-file.
what is the source of the files? you have created them?
what version of cwm recov is included? is it correct for S?
or some 'other-device' one?
Click to expand...
Click to collapse
Is there any risk to try it? I had kernel build9 #1
rfreeman said:
Is there any risk to try it? I had kernel build9 #1
Click to expand...
Click to collapse
no risk, i'm sorry but its useless.
its not getting through verification.
Is there any way that you could fake the verification in a zip file condi? surely there must be.
Why post useless threads, not even chcked personally???
This forum is going down...
If not Condi we would be in all nowhere...
Before you post sth, CHECK if it works. What if it was dangerous and bricks the device???
Have you considered this?
Next time: think about the possible consequences, not post something you don't even know how/if it works, please.
Mods, remove this trash, please.
sebarkh said:
Why post useless threads, not even chcked personally???
This forum is going down...
If not Condi we would be in all nowhere...
Before you post sth, CHECK if it works. What if it was dangerous and bricks the device???
Have you considered this?
Next time: think about the possible consequences, not post something you don't even know how/if it works, please.
Mods, remove this trash, please.
Click to expand...
Click to collapse
May be he doesn't have Sony S. I'm not defending but let's be more open for ideas.
Thanks
Sent from my Desire HD using XDA
SudaDreamS said:
May be he doesn't have Sony S.
Click to expand...
Click to collapse
The OP's signature says they own a Sony Tablet S rooted.
I'm not defending but let's be more open for ideas.
Click to expand...
Click to collapse
Always.
Yes, the idea is what counts.
Since when has it been the standard to post un-checked un-verified and non working files here?
Dangerous is what it is. Lucky this is a sony with barely any user base, if this was posted on the galaxy forums there would be hundreds of possibly messed up phones out there...
I have a sony Tablet S but I can not test this procedure because they are not home. I'm off to work and I will have to stay for a few months so if anyone of good will could test this method and send the results would be happy. @ Condi if the compilation and wrong could you fill it in right way so as to have the root?
@ Condi.Is the guy maybe on the right track ?.If he is maybe you could help him ?
i have a sony tablet s with stock ics rom
tomorrow i'll come back home and try it let's hope it works
Hello everybody,
My name is Leandro, I live in Argentina, so my english is not good enough I've a Sony Ericsson Xperia Mini ST15
Today I was experimenting with mi phone but I make a terrible mistake.
Let me tell us in order what happend:
- I had ParanoidAndroid 2.53 with some bugs tippical of a beta edition
http://forum.xda-developers.com/showthread.php?t=1963556
- I decided to back to ICS. I installed Cyanogen Mod 10 FPX 150
https://sites.google.com/site/projectfreexperia/download/cyanogen-mod-10
However I don't fell confortable without a sock camera
- I download and install (with all the wipes) XPERIA Ultimate HD
http://forum.xda-developers.com/showthread.php?t=1991371
It doesn't come with the "boot.img" so I download KernelPanic 1.25v (I put into my phone via Fastboot)
http://forum.xda-developers.com/showthread.php?t=1861905
HOWEVER I didn't notice when I installed the new rom, the device I'd selected wasn't mine (I make that terrible mistake)(I'd selected "LVW" or something like that)
- When I ran the new ROM, the touchscreen didn't work but all the buttons worked fine. :crying:
- I tryed to back to the Official ROM via Flashtool, but the touchscreen continued with this issue
- I reinstalled the XPERIA Ultimate HD choosing correctly but didn't work
I asked to some people, but they don't know about Sony devices.
If someone knows something to do I will apreciate too much.
Thanks in advance!
My Solution
xshanep19 said:
i had same problem, i accidently installed something on my xperia mini which was for mini pro which caused touch screen to stop working, i flashed different stock firmware and so on, still the touch screen wouldnt work
i flashed xperia active (st17i) firmware 4.0.2.a.0.42_ce.ftf onto my xperia mini (st15i) in flashtool, then flashed stock mini firmware 4.0.2.a.0.62 afterwards
my touchscreen is working again
im not sure if this will work for anyone else, just thought id share what i did...
Click to expand...
Click to collapse
well no one asked ur personal info....
this is xperia development forum...
u have to post xperia mini Q&A forum.
dont post on Xperia Ray Android Development post on
http://forum.xda-developers.com/forumdisplay.php?f=2054
Moved thread to Q&A
well u might have selected the wrong device in aroma...thats y its not working.
sandy7 said:
well u might have selected the wrong device in aroma...thats y its not working.
Click to expand...
Click to collapse
Yes! that was my terrible mistake, but i don't know what i have to do to restore my phone except from wipes, installing the ROM again, other ROM or the official ROM
Can you help me ?
asdwier said:
Yes! that was my terrible mistake, but i don't know what i have to do to restore my phone except from wipes, installing the ROM again, other ROM or the official ROM
Can you help me ?
Click to expand...
Click to collapse
Have you tried flashing the whole firmware using flashtool?
zerorated24 said:
Have you tried flashing the whole firmware using flashtool?
Click to expand...
Click to collapse
Yes, as I said in the begining, the first thing I do when this issue appear is flashing the official gingerbread rom and also tried with the ice cream sandwitch rom.
asdwier said:
HOWEVER I didn't notice when I installed the new rom, the device I'd selected wasn't mine (I make that terrible mistake)(I'd selected "LVW" or something like that)
Click to expand...
Click to collapse
There you have it! If you know what you've done wrong the do it the right way! Re flash the Rom(and Kernel if you want) properly by choosing the right phone model this time!
gamer.11 said:
There you have it! If you know what you've done wrong the do it the right way! Re flash the Rom(and Kernel if you want) properly by choosing the right phone model this time!
Click to expand...
Click to collapse
obviously, I did that as I write in the begining, that's why I don't understand the problem, because I did all the wipes, put the same rom in the correct way, put another rom, the official rom, but, nothing happends, it's the same.
It's like I "change" an internal driver that the following instalations doesn't modify.
Did you format system partition before trying to reflash other roms?
Anyhow the touchscreen driver is in system/etc folder, the name is touch_nameofdevice.hex, if you push that file from a rom for your device and the hw_config.sh it should fix it
Rudjgaard said:
Did you format system partition before trying to reflash other roms?
Anyhow the touchscreen driver is in system/etc folder, the name is touch_nameofdevice.hex, if you push that file from a rom for your device and the hw_config.sh it should fix it
Click to expand...
Click to collapse
I format my phone via CWM y choose "format system", "format cache"
it's too strange for me, I think it's related with my bad choose that I write in the begining, but it must be a solution
I need my phone, I am an idiot
Can somebody help me ?
asdwier said:
Can somebody help me ?
Click to expand...
Click to collapse
Try this:
1. Download that
2. Open the zip and replace all files in the bin folder with files for your device (!), for example from a custom rom for xperia mini
3. After pushing files for your device in there, pack the content again (the meta-inf folder and the bin folder)
4. Copy this to sd card and flash it with cwm
5. This could work, but I can't promise anything
Hope you will get a working touch screen again!
mihahn said:
Try this:
1. Download that
2. Open the zip and replace all files in the bin folder with files for your device (!), for example from a custom rom for xperia mini
3. After pushing files for your device in there, pack the content again (the meta-inf folder and the bin folder)
4. Copy this to sd card and flash it with cwm
5. This could work, but I can't promise anything
Hope you will get a working touch screen again!
Click to expand...
Click to collapse
Thank you, in my rom doesn't exist the following files:
cy8ctma300_fwloader
cyttsp_fwloader
Where can I find them?
asdwier said:
Thank you, in my rom doesn't exist the following files:
cy8ctma300_fwloader
cyttsp_fwloader
Where can I find them?
Click to expand...
Click to collapse
Which rom? Try flashing this (link deleted now), but I can't promise anything, you choose to make this modification! I'm not responsible for anything!
mihahn said:
Which rom? Try flashing this, but I can't promise anything, you choose to make this modification! I'm not responsible for anything!
Click to expand...
Click to collapse
thank you very much but my touchscreen continues in that way
I apreciate your help and cooperation
asdwier said:
thank you very much but my touchscreen continues in that way
I apreciate your help and cooperation
Click to expand...
Click to collapse
There is someone in the thread I read a while ago that has the same phone with you and the same problem.
He just said he flashed xperia active using flashtool. Then flashed xperia mini afterwards.
here is the post
http://forum.xda-developers.com/showthread.php?t=2035151
thank him if it works
zerorated24 said:
there is someone in the thread i read a while ago that has the same phone with you and the same problem.
He just said he flashed xperia active using flashtool. Then flashed xperia mini afterwards.
Here is the post
http://forum.xda-developers.com/showthread.php?t=2035151
thank him if it works
Click to expand...
Click to collapse
woooooow mann!!! Thank you very much, you save my phone and my money!! =)
xshanep19 said:
i had same problem, i accidently installed something on my xperia mini which was for mini pro which caused touch screen to stop working, i flashed different stock firmware and so on, still the touch screen wouldnt work
i flashed xperia active (st17i) firmware 4.0.2.a.0.42_ce.ftf onto my xperia mini (st15i) in flashtool, then flashed stock mini firmware 4.0.2.a.0.62 afterwards
my touchscreen is working again
im not sure if this will work for anyone else, just thought id share what i did...
Click to expand...
Click to collapse
My Solution, Problem Solved , thanks to everyone who help me :laugh:
I've searched very hard to find a recovery for my new phone, but there is not many options. So I managed to build one myself, fixed the fb shifting and did some modifications for convenience.
Hope it will be useful, and thanks to the CWM team.
----------------------------------------------------------------
It seems the raw emmc partition is protected by the kernel, so the update.zip which has a boot.img inside won't fully applied. You have to drag the img out and flash it via hboot mode(unlock required).
I wonder if android devices all protect their raw partitions, or just desire x does.
Anyway, here is a new build of CWM, with a tiny fix of usb lun file mismatch( not sure if it fix the usb mount issue, need someone with a otg cable to test). A patch file of CWM v6.0.1.5 is uploaded too, check to see if it helps.
Claudyy said:
I've searched very hard to find a recovery for my new phone, but there is not many options. So I managed to build one myself, fixed the fb shifting and did some modifications for convenience.
Hope it will be useful, and thanks to the CWM team.
Click to expand...
Click to collapse
Nice work. All i can do is press thankx for sharing since i am a hardcore stock fellow until further updates are released by htc. In time hope many will try your CWM. Good job sharing.
Claudyy said:
I've searched very hard to find a recovery for my new phone, but there is not many options. So I managed to build one myself, fixed the fb shifting and did some modifications for convenience.
Hope it will be useful, and thanks to the CWM team.
Click to expand...
Click to collapse
Is the Screen problem gone?
The Android Manual said:
Is the Screen problem gone?
Click to expand...
Click to collapse
Screen confirm the problem disappeared:good:
Can you share your modifications?
Added to Index.
Outstanding job, keep rocking!
Put [RECOVERY] at the beginning of headline and put date of publising so we can track it.
Mods, please move this to development section.
rogio2 said:
Screen confirm the problem disappeared:good:
Click to expand...
Click to collapse
Nice! Very good news. How about backup and restore capability?
Nice and classic non-touch CWM!!!
Thanks so much!!!
How is it flashed?
Sent from my HTC Desire X using xda app-developers app
imbtrthanu said:
How is it flashed?
Sent from my HTC Desire X using xda app-developers app
Click to expand...
Click to collapse
flashed in Desire_X_All-In-One_Kit_v1.1 Change the name to recovery , working recovery rom
thank you very much >>> Claudyy
1. download the attached file in OP
2. rename the file to CWM.img
3. copy and paste the renamed file in this location (where you extracted AIO Tool)
Desire_X_All-In-One_Kit_v1.1.rar\Desire_X_All-In-One_Kit_v1.1\Data\Recoveries [Here]
4. flash
Has anyone tested it?
Enviado desde mi HTC Desire X usando Tapatalk 2
Works for me.
No more screen jumps.
Made a backup (tar format), removed an app, then restored. Worked as expected.
epic, you must have been the guy in the irc channel, in this case my CWM is no longer supported. use this, also pm a mod to shift this to original dev good work
Lloir said:
epic, you must have been the guy in the irc channel, in this case my CWM is no longer supported. use this, also pm a mod to shift this to original dev good work
Click to expand...
Click to collapse
and this is the epic approval. its really nice to see developers commending others and getting along well instead of sudden urge of jealousy or throwback. thankx to you both and others too.
i am still on stock, but i have downloaded the attachment and am really eager to un-stock. haha
Glad it works for you. It's no big deal, just a small bug fix.
In fact, I'm pretty new to android. Still adapting to this new phone, also trying to make it better.
Claudyy said:
Glad it works for you. It's no big deal, just a small bug fix.
In fact, I'm pretty new to android. Still adapting to this new phone, also trying to make it better.
Click to expand...
Click to collapse
I gotta say you started pretty awesome with your new adaptation. I hope you just dont stop with CWM only. Man i see potential in you for android development (aka Desire X forum).
Mount usb not working....:crying:
rogio2 said:
Mount usb not working....:crying:
Click to expand...
Click to collapse
I can confirm this but it didn't work on Llior's recovery either.
Anyway back-up and restore works just fine (without having to manually create md5) and it looks slick. Good job!
Guys, i posted a test build of touch recovery in dev section. It works but has the display shift bug. @ OP, i need your help to fix the display bug, and then look into the usb mount issue. All credits to OP, Lloir and Koush, i just followed a tutorial.
Regards
Yasir
[Q&A] [PORT][RECOVERY] Carliv Touch Recovery v3.0 [Kitkat] for porting to MTK phones
Q&A for [PORT][RECOVERY] Carliv Touch Recovery v3.0 [Kitkat] for porting to MTK phones
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [PORT][RECOVERY] Carliv Touch Recovery v3.0 [Kitkat] for porting to MTK phones. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello, please tell me. Ported CTR v 3 iOcean elite. For a basis took recovery with P780, tailored for your screen resolution, like all good, but there is one at the new mount memory to the computer recording speed is very very low (for example, when copying the firmware of 600 mb- while copying takes about 15 minutes), what to do ?
r-miheev said:
Hello, please tell me. Ported CTR v 3 iOcean elite. For a basis took recovery with P780, tailored for your screen resolution, like all good, but there is one at the new mount memory to the computer recording speed is very very low (for example, when copying the firmware of 600 mb- while copying takes about 15 minutes), what to do ?
Click to expand...
Click to collapse
That could have multiple causes: antivirus software, low class sdcard, usb port old version (1.1, 1.2), bad cable, etc. It's not related to recovery.
@carliv, i have tried the recovery that you have tag for me but, it does not work... It does not boot into recovery , it just loop into a normal way of booting.... Is this already tested? Or I am the first who tried it?
Update: I guess I'm wrong, I have tried to flash it again with an updated Rasher tool and it works but it take a long time to flash it . Thanks Sir @carliv, by any chance who ported it sir?
Sir @carliv , so now that you have verified that it is working with our device you can now add our unit myphone agua rio v2 (with version 2 because theres a myphone agua rio v1 with a jellybean os)
Kyzrael said:
Update: I guess I'm wrong, I have tried to flash it again with an updated Rasher tool and it works but it take a long time to flash it . Thanks Sir @carliv, by any chance who ported it sir?
Sir @carliv , so now that you have verified that it is working with our device you can now add our unit myphone agua rio v2 (with version 2 because theres a myphone agua rio v1 with a jellybean os)
Click to expand...
Click to collapse
For flashing recovery on Mediatek phones is better to use Mobileuncle from phone or SPflashtools from PC. Some people said Flashify works too, but I didn't checked.
I did the port for this recovery, because I did that for other phones too and I thought to do it for this one too. You were lucky I found infos about the phone online, because you didn't provided any.
Ok, I'll add it on working device list, since the test was successful.
carliv said:
For flashing recovery on Mediatek phones is better to use Mobileuncle from phone or SPflashtools from PC. Some people said Flashify works too, but I didn't checked.
I did the port for this recovery, because I did that for other phones too and I thought to do it for this one too. You were lucky I found infos about the phone online, because you didn't provided any.
Ok, I'll add it on working device list, since the test was successful.
Click to expand...
Click to collapse
@carliv, when i try to mount the sdcard0 it keeps on saying "Error Mounting /storage/sdcard0". What would be the problem with that? Is it in the recovery.fstab? Btw, i enjoy using it now. Thanks again so much
Kyzrael said:
@carliv, when i try to mount the sdcard0 it keeps on saying "Error Mounting /storage/sdcard0". What would be the problem with that? Is it in the recovery.fstab? Btw, i enjoy using it now. Thanks again so much
Click to expand...
Click to collapse
It's the voldmanager number for internal sdcard, probably wrong - I told you I didn't have any info about your phone since you didn't provide something, and as I don't even seen this phone I can't know what is that number. If you change that in fstabs it will work well.
carliv said:
It's the voldmanager number for internal sdcard, probably wrong - I told you I didn't have any info about your phone since you didn't provide something, and as I don't even seen this phone I can't know what is that number. If you change that in fstabs it will work well.
Click to expand...
Click to collapse
If by any chance that I want to correct that, where should I look into? Is my dumpchar info will help me to find the correct value or I should also look into the stock recovery's fstab?
Kyzrael said:
If by any chance that I want to correct that, where should I look into? Is my dumpchar info will help me to find the correct value or I should also look into the stock recovery's fstab?
Click to expand...
Click to collapse
Usually the fat block number in dumchar_info is the voldmanaged number, but sometimes you need to look in the phone. There are few methods to find that through adb commands. Search here on xda and you will find that somewhere.
carliv said:
Usually the fat block number in dumchar_info is the voldmanaged number, but sometimes you need to look in the phone. There are few methods to find that through adb commands. Search here on xda and you will find that somewhere.
Click to expand...
Click to collapse
So, i need to use a linux machine to be able to run commands. Ok, I'll try.... Thanks for an early response
I much confuse with where to look in phone.. In phones root? Using root explorer?
Kyzrael said:
So, i need to use a linux machine to be able to run commands. Ok, I'll try.... Thanks for an early response
I much confuse with where to look in phone.. In phones root? Using root explorer?
Click to expand...
Click to collapse
Hm, you easily skip my first clue, which is the easiest one (posting the dumchar_info) and jump to the hardest part, searching the voldmanaged numer in the phone (usually the content of /dev/block/vold will tell you that in a regular phone)....
carliv said:
Hm, you easily skip my first clue, which is the easiest one (posting the dumchar_info) and jump to the hardest part, searching the voldmanaged numer in the phone (usually the content of /dev/block/vold will tell you that in a regular phone)....
Click to expand...
Click to collapse
I have uploaded pictures... I dont know if /dev/block/vold will help me but i found /dev/block/platform is much informative
Kyzrael said:
I have uploaded pictures... I dont know if /dev/block/vold will help me but i found /dev/block/platform is much informative
Click to expand...
Click to collapse
Well, and you still didn't posted here the dumchar_info content....
carliv said:
Well, and you still didn't posted here the dumchar_info content....
Click to expand...
Click to collapse
Sorry I forgot to attach... In mobile mode of posting with pictures I'm only allowed to attach 4 pictures ... Sorry Sir @carliv again . Btw, here my dumpchar_info
Kyzrael said:
Sorry I forgot to attach... In mobile mode of posting with pictures I'm only allowed to attach 4 pictures ... Sorry Sir @carliv again . Btw, here my dumpchar_info
Click to expand...
Click to collapse
Ok, first, if you quote one of my posts don't use mention too (@).
Second, your phone has an emulated internal sdcard. Post here a stock boot and recovery image from kitkat rom. If external sdcard is working, make a backup and copy from it the boot and recovery images if you don't have in official ROM.
carliv said:
Ok, first, if you quote one of my posts don't use mention too (@).
Second, your phone has an emulated internal sdcard. Post here a stock boot and recovery image from kitkat rom. If external sdcard is working, make a backup and copy from it the boot and recovery images if you don't have in official ROM.
Click to expand...
Click to collapse
I cannot attach the zip here so i uploaded my stock boot and recovery img's here :https://mega.co.nz/#!c98ETRqb!em1QWTOBMotIq149hsadnmPRgOiexJo2T1w7ZQTjGSY
Dont worry sir , my phone is still in the pure stock
Help Carliv!!
Hellow Carliv,
I need your help to install carliv recovery with flashtools, not find the "Scatter" file to download, please help
NekoDk said:
Hellow Carliv,
I need your help to install carliv recovery with flashtools, not find the "Scatter" file to download, please help
Click to expand...
Click to collapse
You can create a scatter file with the use of MTKdroid Tools... After creating scattter file use that to flash ur recovery. You can also flash ur recovery without using flashtool, just install rashr tool.apk or mobileuncle tool to flash it via mobile.
Kyzrael said:
You can create a scatter file with the use of MTKdroid Tools... After creating scattter file use that to flash ur recovery. You can also flash ur recovery without using flashtool, just install rashr tool.apk or mobileuncle tool to flash it via mobile.
Click to expand...
Click to collapse
Q.Q but my phone is bricked, how I can create without phone?
It is a M-Horse S80
Thanks!!
NekoDk said:
Q.Q but my phone is bricked, how I can create without phone?
It is a M-Horse S80
Thanks!!
Click to expand...
Click to collapse
Is there no available dump rom for your unit available in the internet? Try to find someone who is similar with your phone then ask him to do a full back up using mtkdroidtools then ask him to send to you the created scatter file
I am making good progress with a flashable ZIP file that can be flashed using the diagnostic factory mode. The ZIP takes a current EMUI ROM base and debloats it removing Chinese langauge apps and unnecessary Huawei branding. Useful frameworks such as Motion, Gestures, AoD, etc. are retained. Going forward I plan to develop the solution further so that you will be able to modify a customisable config file that will specify what packages you want to retain, and select a downloaded EMUI ROM for the device that will be customised as per your instruction , resulting in a ZIP file being pushed to your device and you then simply need to reboot and allow the phone to flash the update. Simple ! Therefore, each time a new stock ROM is released then this tool simply needs to be run against your customisation !
Development so far-
1. I now have a method of entering the hidden factory mode allowing a ZIP package to be flashed from internal storage , so you can simply download the ZIP to your Download folder and flash from there.
2. I have a method of saving an OTA to file.
3. I have identified the ROM GPT for the device and all partitions and sequencing; this allows me to extract all partitions contained within an Huawei ROM.
4. I am currently interrogating a sample Huawei patch ROM to discern the method of patching filesystems - which i determined is basically is an overlay of the filesystem. This makes things easy as it allows a reverse image creation from a stock partitions minus bloat removed.
5. Next step is to attempt creation of a simple patch ROM using analysis obtained from 1-4 above, and trial this out on my device. This will involve CSC and SHA256RSA creation and will need to determine a method for this. Following that I need to consolidate everything into a script. Going even further, I plan to develop a GUI app which will aid N00bs
6. Following trials I will publish the ROM and instructions with sources so that anyone in the community can examine if they so desire.
* ALL WITHOUT ROOT *
HELP NEEDED:
Anyone with a rooted device , and able to "adb root" into their device as "root" , please PM me as i could do with information that you can obtain a lot easier than I can.
Great work
Waiting for the file
?
Sorry I'm not rooted ?
Update: Rooted if need any adb feedback per OP. I haven't TWRP'd and re-ROM'd but I'm going to go back update 195 and repatch. Each time is a big hassle (just remembering steps).
I think this is great. I can probably give a hand Fri afternoon.
Sent from my HWEVR using XDA Labs
Sounds quite promising but, just to be clear, do you need an unlocked bootloader to do this?
mscion said:
Sounds quite promising but, just to be clear, do you need an unlocked bootloader to do this?
Click to expand...
Click to collapse
Rudolpht said:
I think this is great. I can probably give a hand tomorrow afternoon.
Sent from my HWEVR using XDA Labs
Click to expand...
Click to collapse
+1
mscion said:
Sounds quite promising but, just to be clear, do you need an unlocked bootloader to do this?
Click to expand...
Click to collapse
Hi said no need to Unlock
rowihel2012 said:
Hi said no need to Unlock
Click to expand...
Click to collapse
Hi. I hope you are correct! Just don't see anything explicitly said about bootloader. Only says you don't need root. Would be neat if this approach could be used to rebrand phone.
Any progress?
Looks like this didn't get to far because of the 195 update?
turilo said:
Looks like this didn't get to far..
Click to expand...
Click to collapse
That's The Curse of HUAWEI ?
rowihel2012 said:
That's The Curse of HUAWEI
Click to expand...
Click to collapse
LOL )))))
He even stop replying to this thread...
The guys busy and has a life. Leave him be.
Abdul Oxford said:
The guys busy and has a life. Leave him be.
Click to expand...
Click to collapse
Thank you Abdul. I watched in disbelief as i saw members post comments about me... They will not now be getting the solution.
I need a card for the phone but it doesn't use SD its a type i can't get get hold of.. Some nVcard ?? Anyway.. I'm continuing search and development. There's a hidden menu that you can use to flash a zip from the card you see... I'll PM you abdul when I'm closer..others can go for a hike
Tweetytek said:
Thank you Abdul. I watched in disbelief as i saw members post comments about me... They will not now be getting the solution.
I need a card for the phone but it doesn't use SD its a type i can't get get hold of.. Some nVcard ?? Anyway.. I'm continuing search and development. There's a hidden menu that you can use to flash a zip from the card you see... I'll PM you abdul when I'm closer..others can go for a hike
Click to expand...
Click to collapse
I PM'd you shortly after you started this thread offering my help since I have a rooted AL00. The memory card is Huawei proprietary card called NM Card (nano memory card - SD card the same size as nano SIM card) here's a link for them at Amazon (not an affiliate link) https://www.amazon.com/Huawei-Memory-Mirco-Compact-Flash/dp/B07KS8JBFH and they are quite expensive compared to micro sd cards.
Tweetytek said:
Thank you Abdul. I watched in disbelief as i saw members post comments about me... They will not now be getting the solution.
I need a card for the phone but it doesn't use SD its a type i can't get get hold of.. Some nVcard ?? Anyway.. I'm continuing search and development. There's a hidden menu that you can use to flash a zip from the card you see... I'll PM you abdul when I'm closer..others can go for a hike
Click to expand...
Click to collapse
Sorry about some folks being rude. You see it at times but I was surprised when I read it. Regardless, your finding is interesting. Where is the hidden menu you can use to flash a zip from? I wasn't planning on getting a nano sim because they are pricey. But if it is possible to do as you say I'll provably get one. Is there also an option to flash zip from file on computer? Thanks for your efforts!
Tweetytek said:
Thank you Abdul. I watched in disbelief as i saw members post comments about me... They will not now be getting the solution.
I need a card for the phone but it doesn't use SD its a type i can't get get hold of.. Some nVcard ?? Anyway.. I'm continuing search and development. There's a hidden menu that you can use to flash a zip from the card you see... I'll PM you abdul when I'm closer..others can go for a hike
Click to expand...
Click to collapse
Fully understand your viewpoint but please take into account that the insensitive and pointless posts made by some here do not reflect or represent the majority view of forum members.
Please let me know as well, your hard work is truly appreciated.
Tweetytek said:
Thank you Abdul. I watched in disbelief as i saw members post comments about me... They will not now be getting the solution.
I need a card for the phone but it doesn't use SD its a type i can't get get hold of.. Some nVcard ?? Anyway.. I'm continuing search and development. There's a hidden menu that you can use to flash a zip from the card you see... I'll PM you abdul when I'm closer..others can go for a hike
Click to expand...
Click to collapse
You can use an USB OTG and a usb stick. Works with the hidden menu trick thing. They can be found for pretty cheap price
Status on this?
Sent from my [device_name] using XDA-Developers Legacy app
Ckao said:
Status on this?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
OP and his disciples fled after being offended. I believe they followed the OnePlus rainbow hand in hand.
Sent from my EVR-L29 using Tapatalk