Related
Hey there, please someone run a tcpdump while the OTA update on the mini and send me the log. Because now my phone is still sending, but maybe i'm able to work on further till the phone arrives
Thanks
Bin4ry
X10 mini PRO comes out of the store with the latest firmware 1.1.А.0.8.
and can't be udated Over-the-air :-(
But X10 mini (may be) comes with 1.0.А.1.036
Any idea how to force update Over-the-air, if firmware already latest?
May be tcpdump of update over PcCompanion can help?
yep i know, but i we can crossflash X10 mini firmware to X10 mini pro (keyboard will not work). But now i'm searching for a x10 mini user who is making a tcpdump until i get the device to do it on my own
The faster someone helps the faster you get root
Regards
EDIT:
No way to force the update :/
SE is always using ssl-sha1 crypting in their communication with fota servers. We already tryed to guess the right chat but no luck. For now we can only dump the mainpath to fota.package and then we know it for all firmwares
PC-Comp. won't help, cause i'm working on dmclient. I think i have found the key to root a few hours ago. Now we need fota and firmware dump to roll back to the rom where fota updates from
Ок.
I already found the way to revert my firmware to previous 1.0.A.1.36 firmware.
1.1.А.0.8 -> 1.0.A.1.36 = completed
But now it's UK firmware and loose my Russian Warranty
But OTA update not available im my region :'(
OTA over WLAN is always available, because it only knows firmware version.
Hmm if not it weird.
So you are now on UK firmware?
Try to go into OTA Settings -> Networks -> WLAN Only
Then search again, if you got it:
tcpdump -D
-> you will get interfaces
tcpdump -w dump.log -I *INTERFACENUMBER*
Thanks
Bin4ry
NO!
I think it looks at SIM card, operator or IMEI.
OTA update not available :-(
Yes it now UK firmware – Google Voice works perfectly (it can't works in my country).
Phone Software version:
1235-3408_1.0.A.1.36
GENERIC - user
File System Version:
WORLD-1-8_1.0.A.1.36
S1 Boot version
1229-3593 R8A026
ETS Software version
1234-7269_1S_18
Customization version
1237-0392_R6A
Memory card
1236-3496_R9A
Content version
PA12
Type Number
AAD-3880069-BV
Click to expand...
Click to collapse
Way to revert:
Use debranding procedure.
And quick copy 2 files between SEUS download firmware from SE and load it to phone.
UPD: But SEUS says now that Update available!
UPD2: OTA can't find network without SIM installed!
hmmm, okay thanks for trying. Then we have to find somebody who is willing to do and for whom OTA is available :/
But many thanks for trying
Regards
Bin4ry
How to do that
Hi, I guess I may do what you ask for. I've tried udpated the phone using OTA. It told me I already have the latest software installed, so it OTA should be available by my guess.
What is the exact way to get the dump. I have no idea where tu put the commands in. I've left Win Mobile a few days ago (after 6 years) and I'm very new to Android
Regards,
Radek
Yes, update phone using OTA is clearly possible, here is a part of the message from a member of esto forum : "I upgraded yesterday to 1.1.A.08 in India on OTA and got two fresh apps installed, Roller Coaster & Backup/Restore." can see here (last message on the page) : http://www.esato.com/board/viewtopic.php?topic=194074&start=705
If you got this message there is not OTA for you :/
Some people here claimed that there is OTA, thats because it requested someone of them to capture it with tcpdump.
Regards
Bin4ry
Darkbidule said:
Yes, update phone using OTA is clearly possible, here is a part of the message from a member of esto forum : "I upgraded yesterday to 1.1.A.08 in India on OTA and got two fresh apps installed, Roller Coaster & Backup/Restore." can see here (last message on the page) : http://www.esato.com/board/viewtopic.php?topic=194074&start=705
Click to expand...
Click to collapse
If we can get the information from the service menu from this chaps phone we can hopefully recreate the link
I created a new thread to request this informations .... Maybe this time the right users answer
Regards
Bin4ry
MarylandCookie said:
If we can get the information from the service menu from this chaps phone we can hopefully recreate the link
Click to expand...
Click to collapse
This user got update:
Phone Software Version:
1235-3408_1.1.A.0.8
GEBERIC - user
File System Version:
WORLD-1-8_1.1.A.0.8
German User!
Regards
Bin4ry
May be this will help: device booting log
<5>[ 0.000000] Linux version 2.6.29 ([email protected]) (gcc version 4.2.1)
#1 PREEMPT Sun Apr 25 11:26:30 2010
<4>[ 0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
<4>[ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: QCT MSM7x27 SURF
<6>[ 0.000000] Partition (from atag) system -- Offset:160 Size:670
<6>[ 0.000000] Partition (from atag) cache -- Offset:7d0 Size:190
<6>[ 0.000000] Partition (from atag) appslog -- Offset:ffe Size:2
<6>[ 0.000000] Partition (from atag) userdata -- Offset:960 Size:69e
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 55296
<7>[ 0.000000] free_area_init_node: node 0, pgdat 804de1c8, node_mem_map 805fb000
<7>[ 0.000000] Normal zone: 432 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 54864 pages, LIFO batch:15
<6>[ 0.000000] allocating 524288 bytes at 80800000 (a00000 physical) for kernel ebi1 pmem arena
<6>[ 0.000000] allocating 15159296 bytes at 80eac000 (10ac000 physical) for mdp pmem arena
<6>[ 0.000000] allocating 8880128 bytes at 81d21000 (1f21000 physical) for adsp pmem arena
<6>[ 0.000000] allocating 16777216 bytes at 82599000 (2799000 physical) for gpu1 pmem arena
<6>[ 0.000000] allocating 1048576 bytes at 83599000 (3799000 physical) for fb
<6>[ 0.000000] allocating 2097152 bytes at 83700000 (3900000 physical) for KGSL
<6>[ 0.000000] L210 cache controller enabled
<4>[ 0.000000]
<4>[ 0.000000] [KDUMP] Successfully reserved Crashk Memory
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 54864
<5>[ 0.000000] Kernel command line: mem=216M androidboot.hardware=delta
msm_hsusb.pid=0x3137 console=ttyMSM2 serialno=xxxxx console=ttyMSM0 startup=0x00000001
<3>[ 0.000000] Unknown boot option `androidboot.hardware=delta': ignoring
<6>[ 0.000000] USB serial number: xxxxx
<7>[ 0.000000] startup_reason_setup: 0x1
<4>[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
<4>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000280] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000920] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.016915] Memory: 216MB = 216MB total
<5>[ 0.016948] Memory: 168704KB available (4628K code, 1296K data, 140K init)
<6>[ 0.017291] Calibrating delay loop... 599.65 BogoMIPS (lpj=2998272)
<4>[ 0.230310] Mount-cache hash table entries: 512
<6>[ 0.230871] CPU: Testing write buffer coherency: ok
<6>[ 0.233743] net_namespace: 296 bytes
<6>[ 0.234665] NET: Registered protocol family 16
<6>[ 0.236738] socinfo_init: v3, id=43, ver=0.0, raw_id=0, raw_ver=0, hw_plat=0
<6>[ 0.236760] acpu_clock_init()
<6>[ 0.236925] L val: PLL0: 50, PLL1: 12, PLL2: 62
<6>[ 0.237055] ACPU running at 600000 KHz
<6>[ 0.237071] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
<6>[ 0.237098] 0 19200 -1 1 19200 1 30720 -1 -1 -1 1 4 3
<6>[ 0.237123] 1 120000 0 8 60000 2 61440 -1 -1 -1 5 4 3
<6>[ 0.237150] 2 122880 1 2 61440 2 61440 1 -1 -1 5 4 3
<6>[ 0.237175] 3 200000 2 6 66667 3 61440 1 2 -1 5 4 6
<6>[ 0.237200] 4 245760 1 1 122880 2 61440 1 2 3 7 -1 6
<6>[ 0.237225] 5 320000 0 3 160000 2 160000 1 2 3 7 -1 6
<6>[ 0.237250] 6 400000 2 3 133333 3 160000 5 4 3 7 -1 8
<6>[ 0.237276] 7 480000 0 2 160000 3 160000 5 4 6 -1 -1 8
<6>[ 0.237301] 8 600000 2 2 200000 3 200000 7 -1 6 -1 -1 -1
<6>[ 0.237320] Shared PLL control available.
<6>[ 0.237333] 5 scaling frequencies supported.
<7>[ 0.274038] msm_mddi_hitachi_display_device_init
<7>[ 0.274426] msm_mddi_samsung_display_device_init
<7>[ 0.274635] msm_mddi_toshiba_display_device_init
<6>[ 0.275236] console [oops-1] enabled
<4>[ 0.291785] bio: create slab <bio-0> at 0
<6>[ 0.293121] msm_i2c_probe
<6>[ 0.293233] msm_i2c_probe: clk_ctl 315, 400000 Hz
<6>[ 0.296706] Bluetooth: Core ver 2.15
<6>[ 0.297058] NET: Registered protocol family 31
<6>[ 0.297075] Bluetooth: HCI device and connection manager initialized
<6>[ 0.297096] Bluetooth: HCI socket layer initialized
<6>[ 0.299913] NET: Registered protocol family 2
<6>[ 0.300103] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<7>[ 0.300196] Switched to high resolution mode on CPU 0
<6>[ 0.300596] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.300911] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.301081] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.301100] TCP reno registered
<6>[ 0.301290] NET: Registered protocol family 1
<6>[ 0.301893] checking if image is initramfs... it is
<6>[ 0.593413] Freeing initrd memory: 684K
<6>[ 0.595695] smd probe
<6>[ 0.595718] smd_core_init()
<6>[ 0.595801] smd_core_init() done
<6>[ 0.596068] smd_alloc_channel: cid 0 fifo found; size = 8192
<6>[ 0.596091] smd_alloc_channel() 'DS' cid=0
<6>[ 0.597035] smd_alloc_channel: cid 1 fifo found; size = 8192
<6>[ 0.597060] smd_alloc_channel() 'DIAG' cid=1
<6>[ 0.597440] smd_alloc_channel: cid 2 fifo found; size = 8192
<6>[ 0.597465] smd_alloc_channel() 'RPCCALL' cid=2
<6>[ 0.597868] smd_alloc_channel: cid 7 fifo found; size = 32768
<6>[ 0.597891] smd_alloc_channel() 'DATA1' cid=7
<6>[ 0.598321] smd_alloc_channel: cid 8 fifo found; size = 8192
<6>[ 0.598343] smd_alloc_channel() 'DATA2' cid=8
<6>[ 0.598766] smd_alloc_channel: cid 9 fifo found; size = 8192
<6>[ 0.598788] smd_alloc_channel() 'DATA3' cid=9
<6>[ 0.599191] smd_alloc_channel: cid 10 fifo found; size = 8192
<6>[ 0.599215] smd_alloc_channel() 'DATA4' cid=10
<6>[ 0.599628] smd_alloc_channel: cid 11 fifo found; size = 32768
<6>[ 0.599651] smd_alloc_channel() 'DATA5' cid=11
<6>[ 0.600021] smd_alloc_channel: cid 12 fifo found; size = 32768
<6>[ 0.600045] smd_alloc_channel() 'DATA6' cid=12
<6>[ 0.600485] smd_alloc_channel: cid 13 fifo found; size = 32768
<6>[ 0.600506] smd_alloc_channel() 'DATA7' cid=13
<6>[ 0.600940] smd_alloc_channel: cid 17 fifo found; size = 8192
<6>[ 0.600963] smd_alloc_channel() 'DATA11' cid=17
<3>[ 0.601380] smd_alloc_channel: cid 38 does not exist
<6>[ 0.601401] smd_alloc_channel: cid 39 fifo found; size = 8192
<6>[ 0.601421] smd_alloc_channel() 'DAL00' cid=39
<6>[ 0.601813] smd_alloc_channel: cid 40 fifo found; size = 8192
<6>[ 0.601835] smd_alloc_channel() 'DATA5_CNTL' cid=40
<6>[ 0.602243] smd_alloc_channel: cid 41 fifo found; size = 8192
<6>[ 0.602265] smd_alloc_channel() 'DATA6_CNTL' cid=41
<6>[ 0.602646] smd_alloc_channel: cid 42 fifo found; size = 8192
<6>[ 0.602670] smd_alloc_channel() 'DATA7_CNTL' cid=42
<6>[ 0.603630] SMD Control Port Driver Initialized.
<6>[ 0.604486] SMD: ch 2 CLOSED -> OPENING
<6>[ 0.604610] SMD: ch 2 OPENING -> OPENED
<3>[ 0.605335] Using very old AMSS modem firmware.
<3>[ 0.605383] Using very old AMSS modem firmware.
<6>[ 0.605916] [adsp:adsp.c:adsp_init] rs3000000a:00010000 -- 0
<6>[ 0.609846] [msm-audio:audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.609876] [msm-audio:audpp.c:audpp_probe] Number of concurrency supported 7
<6>[ 0.609903] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.609921] [msm-audio:audpp.c:audpp_probe] queueid:13
<6>[ 0.609936] [msm-audio:audpp.c:audpp_probe] decid:0
<6>[ 0.609953] [msm-audio:audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.609970] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.609991] [msm-audio:audpp.c:audpp_probe] queueid:14
<6>[ 0.610006] [msm-audio:audpp.c:audpp_probe] decid:1
<6>[ 0.610021] [msm-audio:audpp.c:audpp_probe] nr_codec_support:5
<6>[ 0.610038] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.610055] [msm-audio:audpp.c:audpp_probe] queueid:15
<6>[ 0.610071] [msm-audio:audpp.c:audpp_probe] decid:2
<6>[ 0.610086] [msm-audio:audpp.c:audpp_probe] nr_codec_support:5
<6>[ 0.610106] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.610125] [msm-audio:audpp.c:audpp_probe] queueid:16
<6>[ 0.610140] [msm-audio:audpp.c:audpp_probe] decid:3
<6>[ 0.611198] [msm-audio:audpp.c:audpp_probe] nr_codec_support:4
<6>[ 0.611218] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.611241] [msm-audio:audpp.c:audpp_probe] queueid:17
<6>[ 0.611256] [msm-audio:audpp.c:audpp_probe] decid:4
<6>[ 0.611271] [msm-audio:audpp.c:audpp_probe] nr_codec_support:1
<6>[ 0.627273] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 0.627285] tick = 161731
<6>[ 0.627290] stamp = 18371725
<4>[ 0.627323] /home/hudsonslave/root/workspace/offbuild_param_deckard1_0_release_caf_matrix/
HUDSON_PRODUCT/robyn/HUDSON_VARIANT/user/label/
BUILDNODE/kernel/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 0.628021] proximity-sensor: proximity_probe called.
<6>[ 0.628586] Registered semc device: proximity-sensor
<6>[ 0.628605] proximity-sensor: driver installation succeeded
<6>[ 0.641741] ashmem: initialized
<6>[ 0.643300] fuse init (API version 7.11)
<4>[ 0.643923] yaffs May 12 2010 22:12:25 Installing.
<6>[ 0.643985] msgmni has been set to 331
<6>[ 0.644051] io scheduler noop registered
<6>[ 0.644066] io scheduler anticipatory registered (default)
<6>[ 0.644856] msm_fb_probe: phy_Addr = 0x3799000 virt = 0x8e200000
<6>[ 0.646640] MDP HW Base phy_Address = 0xaa200000 virt = 0x8e100000
<6>[ 0.647323] primary mddi base phy_addr = 0xaa600000 virt = 0x8e00c000
<6>[ 0.659028] MDDI: Hitachi: Found display with cell ID = 0xfd, module ID = 0x2,
revision ID = 0x20, driver ID = 0x13
<6>[ 0.662831] FrameBuffer[0] 240x320 size=307200 bytes is registered successfully!
<6>[ 0.663513] Registered led device: lcd-backlight
<6>[ 0.684138] diagfwd initializing ..
<6>[ 0.684456] SMD: ch 1 CLOSED -> OPENING
<6>[ 0.684475] diag opened SMD port; r = 0
<6>[ 0.684560] SMD: ch 1 OPENING -> OPENED
<6>[ 0.684825] diagchar initializing ..
<6>[ 0.685311] diagchar initialized
<6>[ 0.685545] [drm] Initialized drm 1.1.0 20060810
<6>[ 0.685633] msm_serial: detected port #2
<6>[ 0.685736] msm_serial.2: ttyMSM2 at MMIO 0xa9c00000 (irq = 11) is a MSM
<6>[ 0.685855] msm_serial: console setup on port #2
<6>[ 0.685880] console [ttyMSM2] enabled
<6>[ 1.533379] msm_serial: driver initialized
<6>[ 1.535949] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 1.544018] msm_serial_hs module loaded
<6>[ 1.551528] brd: module loaded
<6>[ 1.555713] loop: module loaded
<6>[ 1.556083] pmem: 1 init
<6>[ 1.557169] pmem_adsp: 0 init
<6>[ 1.559469] pmem_gpu1: 0 init
<3>[ 1.563249] pmic-lightsensor: registered.
<6>[ 1.566681] SEMC_Systemconnector: Successfully initialized.
<6>[ 1.573843] Registered semc device: vibrator
<6>[ 1.575488] msm_pmic_vibrator version 0.1 loaded
<6>[ 1.580086] semc_power: Loading...
<6>[ 1.583503] bq24180: Setting up HW
<6>[ 1.586909] bq24180: Probing
<6>[ 1.589724] bq24180: Starting watchdog reset
<6>[ 1.594721] bq24180: BQ24180 not initialized by boot SW
<6>[ 1.599184] bq24180: Stopping watchdog reset
<6>[ 1.603738] bq24180: Found HW BQ24180 revision 0x01.
<6>[ 1.609509] bq24180: Set init values
<6>[ 1.611966] bq24180: Setting charger voltage to 0 mV
<6>[ 1.616998] bq24180: Setting charger current to 0 mA
<6>[ 1.621856] bq24180: Disable charger
<6>[ 1.625506] bq24180: Set safety timer to 0 minutes
<6>[ 1.630826] semc_pwr_pltf: Setting up platform
<3>[ 1.635348] power_supply battery: driver failed to report `status' property
<3>[ 1.642773] bq24180: Charger Ready
<6>[ 1.655369] PPP generic driver version 2.4.2
<6>[ 1.655963] PPP Deflate Compression module registered
<6>[ 1.659039] PPP BSD Compression module registered
<6>[ 1.663778] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256)
(6 bit encapsulation enabled).
<6>[ 1.673376] CSLIP: code copyright 1989 Regents of the University of California.
<6>[ 1.681729] rmnet0 (): not using net_device_ops yet
<6>[ 1.686136] rmnet1 (): not using net_device_ops yet
<6>[ 1.691033] rmnet2 (): not using net_device_ops yet
<6>[ 1.695803] Linux video capture interface: v2.00
<7>[ 1.813333] msm_camdrv: <<<<<<<<<< Camera vendor [0] >>>>>>>>>>>
<7>[ 1.813353] msm_camdrv: <<<<<<<<<< Camera revision[12307] >>>>>>>>>>>
<3>[ 1.930343] bq24180: Charger Ready
<6>[ 2.272261] msm_nand: phys addr 0xa0a00000 dmac 0x7
<6>[ 2.272399] allocated dma buffer at ffa1d000, dma_addr ccaf000
<6>[ 2.277611] status: e00020
<6>[ 2.280014] nandid: 5510bc20 maker 20 device bc
<6>[ 2.284563] ONFI probe : Found an ONFI compliant device NANDCBR4N9BZBC5
<6>[ 2.291658] Found a supported NAND device
<6>[ 2.295636] NAND Id : 0x5510bc20
<6>[ 2.298936] Buswidth : 16 Bits
<6>[ 2.302074] Density : 512 MByte
<6>[ 2.305273] Pagesize : 2048 Bytes
<6>[ 2.308571] Erasesize: 131072 Bytes
<6>[ 2.312053] Oobsize : 64 Bytes
<6>[ 2.315168] 2nd_bbm : 0
<6>[ 2.317686] CFG0 Init : 0xa85408c0
<6>[ 2.321254] CFG1 Init : 0x0004745e
<6>[ 2.324803] ECCBUFCFG : 0x00000203
<5>[ 2.328374] Creating 4 MTD partitions on "msm_nand":
<5>[ 2.333329] 0x000002c00000-0x00000fa00000 : "system"
<5>[ 2.339611] 0x00000fa00000-0x000012c00000 : "cache"
<5>[ 2.344109] 0x00001ffc0000-0x000020000000 : "appslog"
<5>[ 2.349089] 0x000012c00000-0x00001ffc0000 : "userdata"
<6>[ 2.354544] msm_hsusb_rpc_connect: rpc connect success vers = 10001
<3>[ 2.359533] msm_chg_rpc_connect: connect compatible failed
<6>[ 2.365201] usb_set_composition: composition set to product id = 3137
<6>[ 2.371554] phy info257)
<6>[ 2.374684] usb_probe() io=8e01a000, irq=47, dma=ffa1e000(cca4000)
<6>[ 2.380594] Created the sysfs entry successfully
<6>[ 2.385101] Created the functions sysfs entry successfully
<6>[ 2.391774] usb_function_register: name = 'adb', map = 1
<6>[ 2.396276] usb_function_register: name = 'mass_storage', map = 4
<6>[ 2.402186] usb_set_composition: composition set to product id = 3137
<3>[ 2.409271] msm_hsusb_is_serial_num_null: rpc call success
<3>[ 2.414694] msm_hsusb_send_serial_number: rpc call failed! error: -22
<3>[ 2.421243] msm_hsusb_send_productID: rpc call success
<6>[ 2.425584] msm_hsusb: functions bound. starting.
<6>[ 2.430314] usb_bind_func() (mass_storage)
<3>[ 2.434568] usb_start: pm_app_rpc connect failed
<6>[ 2.439526] usb_function_register: name = 'diag', map = 0
<6>[ 2.444514] msm_hsusb_phy_reset
<6>[ 2.448373] usb_function_register: name = 'modem', map = 2
<6>[ 2.453144] usb_function_register: name = 'nmea', map = 3
<6>[ 2.458578] usb_function_register: name = 'ethernet', map = 5
<6>[ 2.465061] synaptics_load_rmi4_func_regs: Func:f11_2D Query_Base:0x7a Cmd_Base:0x59 Ctrl_Base:0x26 Data_Base:0x18
<6>[ 2.475183] synaptics_load_rmi4_func_regs: Func:f08_BIST Query_Base:0x78 Cmd_Base:0x58 Ctrl_Base:0x20 Data_Base:0x15
<6>[ 2.485694] synaptics_load_rmi4_func_regs: Func:f01_RMI Query_Base:0x63 Cmd_Base:0x57 Ctrl_Base:0x1e Data_Base:0x13
<6>[ 2.601839] synaptics_ts_probe: nbr_panels:1 nbr_fingers:1 data_size:5
<6>[ 2.602733] synaptics_ts_probe: fw_rev:17 max_x:1632 max_y:2156
<6>[ 2.608656] synaptics_ts_probe: max_x 1632, max_y 2156
<6>[ 2.613771] synaptics_ts_probe: inactive_x 0 0, inactive_y 0 0
<6>[ 2.619574] synaptics_ts_probe: snap_x 0-0 0-0, snap_y 0-0 0-0
<6>[ 2.625904] input: synaptics-rmi-touchscreen as /devices/virtual/input/input0
<6>[ 2.633146] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
<6>[ 2.641888] GPIO Matrix Keypad Driver: Start keypad matrix for robyn_keypad in interrupt mode
<6>[ 2.650031] input: robyn_keypad as /devices/virtual/input/input1
<7>[ 2.656608] RTC Registering with rs30000048:00010000
<7>[ 2.657676] msm_rtc: dev (254:0)
<6>[ 2.657724] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
<7>[ 2.664044] msm_rtc_secure: dev (254:1)
<6>[ 2.664064] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc_secure as rtc1
<6>[ 2.672664] i2c /dev entries driver
<6>[ 2.677203] input: compass as /devices/virtual/input/input2
<6>[ 2.730606] Bosch Sensortec Device detected!
<6>[ 2.730618] BMA150/SMB380 registered I2C driver!
<6>[ 2.733861] register_chrdev
<6>[ 2.736793] class_create ok
<6>[ 2.739681] BMA150 device create ok
<6>[ 2.743949] Bluetooth: HCI UART driver ver 2.2
<6>[ 2.747311] Bluetooth: HCI H4 protocol initialized
<6>[ 2.752108] Bluetooth: HCI BCSP protocol initialized
<6>[ 2.757029] Bluetooth: HCILL protocol initialized
<7>[ 2.761731] bluetooth_power_init
<7>[ 2.761814] bt_power_probe
<6>[ 2.763421] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,113 dma 8
<6>[ 2.768574] mmc0: 8 bit data mode disabled
<6>[ 2.772693] mmc0: 4 bit data mode enabled
<6>[ 2.776648] mmc0: polling status mode disabled
<6>[ 2.781116] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
<6>[ 2.787411] mmc0: Slot eject status = 0
<6>[ 2.791244] mmc0: Power save feature enable = 1
<6>[ 2.795749] mmc0: DM non-cached buffer at ffa20000, dma_addr 0x0cddc000
<6>[ 2.802356] mmc0: DM cmd busaddr 0x0cddc000, cmdptr busaddr 0x0cddc300
<6>[ 2.809724] lm3530 probing
<6>[ 2.815201] Registered semc device: lm3530-led
<6>[ 2.815973] lm3530 0-0036: version 0.1 loaded
<6>[ 2.820609] Adding I2C driver for LM35300)
<6>[ 2.824564] msm_pmic_flash_led probing
<6>[ 2.832014] Registered semc device: spotlight
<6>[ 2.832858] Registered semc device: flashled
<6>[ 2.836891] msm_pmic_flash_led version 0.1 loaded
<6>[ 2.845868] logger: created 64K log 'log_main'
<6>[ 2.846371] logger: created 256K log 'log_events'
<6>[ 2.856069] logger: created 64K log 'log_radio'
<6>[ 2.862094] Advanced Linux Sound Architecture Driver Version 1.0.18a.
<4>[ 2.868554] No device for DAI CODEC_DAI
<4>[ 2.868644] No device for DAI CPU_DAI
<3>[ 2.875876] msm_soc: create pcms
<6>[ 2.876268] asoc: CODEC_DAI <-> CPU_DAI mapping ok
<3>[ 2.878413] msm_soc: ALSA MSM Mixer Setting
<6>[ 2.884941] ALSA device list:
<6>[ 2.885529] #0: msm-audio (MSM-CARD)
<6>[ 2.889313] TCP cubic registered
<6>[ 2.892486] NET: Registered protocol family 17
<6>[ 2.896921] Bluetooth: L2CAP ver 2.13
<6>[ 2.900586] Bluetooth: L2CAP socket layer initialized
<6>[ 2.905568] Bluetooth: SCO (Voice Link) ver 0.6
<6>[ 2.910071] Bluetooth: SCO socket layer initialized
<6>[ 2.917104] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.920104] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.924936] Bluetooth: RFCOMM ver 1.11
<6>[ 2.928651] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.933988] Bluetooth: BNEP filters: protocol multicast
<6>[ 2.939153] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.945766] RPC: Registered udp transport module.
<6>[ 2.949766] RPC: Registered tcp transport module.
<6>[ 2.954894] clock_late_init() disabled 15 unused clocks
<6>[ 2.960904] input: 7k_handset as /devices/virtual/input/input3
<6>[ 2.967043] smsm_entry 7, new intr_mask 0
<6>[ 2.969453] smsm_entry 6, new intr_mask 0
<6>[ 2.973643] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<6>[ 2.994258] [drm] Initialized kgsl 2.0.0 20090810 on minor 0
<6>[ 2.994918] msm_v4l2: msm_v4l2_init
<6>[ 2.998974] rs30000048:00010000 rs30000048:00010000: setting system
clock to 2010-06-26 06:06:05 UTC (1277532365)
<6>[ 3.008203] Freeing init memory: 140K
<6>[ 3.120511] usb_lpm_enter: usb in low power mode
<6>[ 3.120628] hsusb: IDLE -> OFFLINE
<3>[ 3.171403] init: /init.rc: 218: invalid option 'busybox'
<3>[ 3.172109] init: /init.delta.rc: 74: ignored duplicate definition of service 'qmuxd'
<4>[ 3.233606] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[ 3.236084] mmc0: new SD card at address aaaa
<6>[ 3.250378] mmcblk0: mmc0:aaaa SU02G 1.84 GiB
<6>[ 3.250734] mmcblk0: p1
<6>[ 3.363538] yaffs: dev is 32505856 name is "mtdblock0"
<6>[ 3.363658] yaffs: passed flags ""
<4>[ 3.366456] yaffs: Attempting MTD mount on 31.0, "mtdblock0"
<4>[ 3.476239] yaffs: restored from checkpoint
<4>[ 3.476386] yaffs_read_super: isCheckpointed 1
<6>[ 3.479724] yaffs: dev is 32505859 name is "mtdblock3"
<6>[ 3.484386] yaffs: passed flags ""
<4>[ 3.487751] yaffs: Attempting MTD mount on 31.3, "mtdblock3"
<4>[ 3.573716] yaffs: restored from checkpoint
<4>[ 3.585258] yaffs_read_super: isCheckpointed 0
<6>[ 3.591041] yaffs: dev is 32505857 name is "mtdblock1"
<6>[ 3.591156] yaffs: passed flags ""
<4>[ 3.593948] yaffs: Attempting MTD mount on 31.1, "mtdblock1"
<4>[ 3.601418] yaffs: restored from checkpoint
<4>[ 3.603759] yaffs_read_super: isCheckpointed 1
<3>[ 3.635841] init: execve /sbin/checkabortedflash
<3>[ 3.653221] init: waitpid return (PID = 1051)
<3>[ 3.653339] init: child process exited normally
<3>[ 3.741036] init: cannot find '/system/bin/playmp3', disabling 'bootsound'
<3>[ 3.772914] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<6>[ 3.894298] SMD: ch 40 CLOSED -> OPENING
<6>[ 3.894483] SMD: ch 40 OPENING -> OPENED
<6>[ 3.897733] SMD: ch 41 CLOSED -> OPENING
<6>[ 3.900471] SMD: ch 41 OPENING -> OPENED
<6>[ 3.905264] SMD: ch 42 CLOSED -> OPENING
<6>[ 3.908278] SMD: ch 42 OPENING -> OPENED
<6>[ 4.492636] bq24180: Set charger safety limit voltage to 4200 mV
<6>[ 4.494706] bq24180: Set charger safety limit current to 650 mA
<6>[ 4.496751] bq24180: Set charge current termination to 200 mA
<6>[ 4.504173] proximity-sensor (th_set): threshold=27
<6>[ 4.509206] proximity-sensor (hyst_set): hysteresis=8
<6>[ 5.448834] [msm-audio:snd.c:snd_ioctl] snd_agc_ctl 1
<6>[ 5.456164] warning: `Mixer Thread fo' uses 32-bit capabilities (legacy support in use)
<6>[ 5.458816] [msm-audio:snd.c:snd_ioctl] snd_set_device 29 1 1
<6>[ 5.468999] [msm-audio:snd.c:snd_ioctl] snd_set_device 29 1 0
<6>[ 5.477079] [msm-audio:snd.c:snd_ioctl] snd_set_volume 26 0 7
<6>[ 5.477841] [msm-audio:snd.c:snd_ioctl] snd_set_volume 27 0 7
<6>[ 5.480276] [msm-audio:snd.c:snd_ioctl] snd_set_volume 28 0 7
<6>[ 5.481043] [msm-audio:snd.c:snd_ioctl] snd_set_volume 29 0 7
<6>[ 5.481694] [msm-audio:snd.c:snd_ioctl] snd_set_volume 30 0 7
<6>[ 5.482381] [msm-audio:snd.c:snd_ioctl] snd_set_volume 31 0 7
<6>[ 5.483063] [msm-audio:snd.c:snd_ioctl] snd_set_volume 32 0 7
<6>[ 5.483968] [msm-audio:snd.c:snd_ioctl] snd_set_volume 33 0 7
<6>[ 5.484656] [msm-audio:snd.c:snd_ioctl] snd_set_volume 34 0 7
<6>[ 5.485271] [msm-audio:snd.c:snd_ioctl] snd_set_volume 35 0 7
<6>[ 5.485914] [msm-audio:snd.c:snd_ioctl] snd_set_volume 36 0 7
<6>[ 5.486613] [msm-audio:snd.c:snd_ioctl] snd_set_volume 37 0 7
<6>[ 5.487503] [msm-audio:snd.c:snd_ioctl] snd_set_volume 56 0 7
<6>[ 5.488218] [msm-audio:snd.c:snd_ioctl] snd_set_volume 38 0 7
<6>[ 5.488899] [msm-audio:snd.c:snd_ioctl] snd_set_volume 39 0 7
<6>[ 5.489566] [msm-audio:snd.c:snd_ioctl] snd_set_volume 40 0 7
<6>[ 5.490268] [msm-audio:snd.c:snd_ioctl] snd_set_volume 41 0 7
<6>[ 5.491174] [msm-audio:snd.c:snd_ioctl] snd_set_volume 42 0 7
<6>[ 5.491911] [msm-audio:snd.c:snd_ioctl] snd_set_volume 43 0 7
<6>[ 5.492576] [msm-audio:snd.c:snd_ioctl] snd_set_volume 44 0 7
<6>[ 5.493266] [msm-audio:snd.c:snd_ioctl] snd_set_volume 45 0 7
<6>[ 5.493894] [msm-audio:snd.c:snd_ioctl] snd_set_volume 46 0 7
<6>[ 5.494801] [msm-audio:snd.c:snd_ioctl] snd_set_volume 47 0 7
<6>[ 5.495534] [msm-audio:snd.c:snd_ioctl] snd_set_volume 48 0 7
<6>[ 5.496211] [msm-audio:snd.c:snd_ioctl] snd_set_volume 49 0 7
<6>[ 5.496873] [msm-audio:snd.c:snd_ioctl] snd_set_volume 50 0 7
<6>[ 5.497539] [msm-audio:snd.c:snd_ioctl] snd_set_volume 51 0 7
<6>[ 5.498448] [msm-audio:snd.c:snd_ioctl] snd_set_volume 52 0 7
<6>[ 5.499248] [msm-audio:snd.c:snd_ioctl] snd_set_volume 53 0 7
<6>[ 5.499889] [msm-audio:snd.c:snd_ioctl] snd_set_volume 54 0 7
<6>[ 5.500524] [msm-audio:snd.c:snd_ioctl] snd_set_volume 55 0 7
<6>[ 10.442193] pmem: successful request for physical address of pmem region id 3,
offset 41521152, len 4194304
<6>[ 10.500393] misc kgsl: firmware: requesting yamato_pm4.fw
<6>[ 10.510956] misc kgsl: firmware: requesting yamato_pfp.fw
<3>[ 10.512303] init: untracked pid 1153 exited
<3>[ 10.516329] init: untracked pid 1156 exited
<6>[ 33.928733] request_suspend_state: wakeup (3->0) at 33928558408
(2010-06-26 06:06:36.429746690 UTC)
<6>[ 35.140503] [msm-audio:snd.c:snd_ioctl] snd_set_volume 29 0 5
<6>[ 35.340956] [msm-audio:snd.c:snd_ioctl] snd_set_volume 29 0 7
<6>[ 36.830411] bq24180: Strange HW behaviour. Got safety timer fault but HW timer is disabled.
<3>[ 36.830448] bq24180: Charger Ready
<3>[ 37.130403] bq24180: Charger Ready
<6>[ 37.960528] input: systemconnector as /devices/virtual/input/input4
<7>[ 38.090198] SEMC_PHF (Interrupt handler) Status changed. Headset is not inserted
<6>[ 38.090639] semc_power: Disabling DCOUT. Current: 1000
<6>[ 52.121653] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 52.121664] tick = 1932058
<6>[ 52.121671] stamp = 50413832199208961
<6>[ 52.130404] rs30000048:00010000 rs30000048:00010000: setting system
clock to 2010-06-26 06:06:54 UTC (1277532414)
<3>[ 57.796259] binder: release proc 1527, transaction 6042, not freed
<6>[ 143.176619] [msm-audio:audmgr.c:audmgr_rpc_thread] start
<6>[ 143.184273] [msm-audio:audio_out.c:audio_enable]
<6>[ 143.184304] [msm-audio:audmgr.c:audmgr_enable] session 0x80532ca0
<6>[ 143.185274] [msm-audio:audmgr.crocess_audmgr_callback] rpc READY handle=0x00000000
<6>[ 143.185678] [msm-audio:audmgr.c:audmgr_rpc_thread] rpc_reply status 0
<6>[ 143.237589] [msm-audio:audmgr.crocess_audmgr_callback] rpc CODEC_CONFIG
volume=0x00000406
<6>[ 143.239933] [adsp:adsp.c:handle_adsp_rtos_mtoa_app] INIT_INFO Event
<6>[ 143.240533] [adsp:adsp.c:msm_adsp_get] opening module AUDPPTASK
<6>[ 143.241208] [adsp:adsp.c:msm_adsp_get] module AUDPPTASK has been registered
<6>[ 143.241234] [adsp:adsp.c:msm_adsp_enable] enable 'AUDPPTASK'state[0] id[17227122]
<6>[ 143.242614] [adsp:adsp.c:handle_adsp_rtos_mtoa_app] rpc event=0, proc_id=2,
module=17227122, image=0
<6>[ 143.243199] [adsp:adsp.c:handle_adsp_rtos_mtoa_app] module AUDPPTASK: READY
<6>[ 143.244721] [msm-audio:audpp.c:audpp_dsp_event] ENABLE
<6>[ 143.244749] [msm-audio:audio_out.c:audio_dsp_event] CFG_MSG ENABLE
<3>[ 143.244831] [adsp:adsp.c:__msm_adsp_write] failed to write queue 140, retry
<3>[ 143.244886] [adsp:adsp.c:__msm_adsp_write] failed to write queue 140, retry
<6>[ 146.284549] [msm-audio:audio_out.c:audio_dsp_event] PCMDMAMISSED 32
<6>[ 149.222186] [msm-audio:audio_out.c:audio_disable]
<6>[ 149.222828] [msm-audio:audio_out.c:audio_dsp_event] CFG_MSG DISABLE
<6>[ 149.222931] [msm-audio:audpp.c:audpp_dsp_event] DISABLE
<6>[ 149.223009] [msm-audio:audpp.c:audpp_disable] Received CFG_MSG_DISABLE from ADSP
<6>[ 149.223061] [adsp:adsp.c:msm_adsp_disable] disable 'AUDPPTASK'
<6>[ 149.226809] [adsp:adsp.c:msm_adsp_disable_locked] disable interrupt
<6>[ 149.226864] [adsp:adsp.c:msm_adsp_put] closing module AUDPPTASK
<6>[ 149.226948] [msm-audio:audmgr.c:audmgr_disable] session 0x80532ca0
<6>[ 149.230789] [msm-audio:audmgr.c:audmgr_rpc_thread] rpc_reply status 0
<3>[ 149.241483] [msm-audio:audmgr.crocess_audmgr_callback] DISABLED
Bin4ry said:
This user got update:
Phone Software Version:
1235-3408_1.1.A.0.8
GEBERIC - user
File System Version:
WORLD-1-8_1.1.A.0.8
German User!
Regards
Bin4ry
Click to expand...
Click to collapse
I take it he has a generic handset or does he have a provider handset?
*edit*
Just tried with no luck
*double post*
No OTA in Spain as well
Tried with Movistar, but it was already in 11A08 and said "already in latest version"; debranded to 10A136 and tried again but no luck,same message trought OTA. Update detected in SEUS from 10A136 to 11A08, updated succefully to debranded version.
Could it be that OTA examines both the Fyle System Version and Software Version? I entered service menu and the data was:
Phone Software Version
1235-3408_1.0.A.1.36
GENERIC - user
File System Version
WORLD-1-8_1.1A.0.8
So it seems that the software version was downgraded, but it kept the 11A08 in file system. Checking it in Settings-> About the Phone it was still marked as 11A08 Compilation.
Sorry for the long post, maybe it's all a nonsense, but just trying to get the OTA info I stepped into this and seemed curious... I'll keep checking.
Good luck for everybody!!
Hi!
Usb host on my A70 IT doesn't works(or works not properly?)
Result is the same with 4 different usb flash...
PHP:
<6>request_suspend_state: wakeup (3->0) at 34543067291305 (2011-03-20 08:55:26.774108889 UTC)
<7>omapdss omapdss: regulator_enable omapdss-vdds_dsi enabled 0
<4>omapdss DPI: Could not find exact pixel clock. Requested 41575 kHz, got 41574 kHz
<6>panel_enable [lcd]
<7>usb usb1: usb auto-resume
<7>ohci-omap ohci-omap.0: resume root hub
<7>hub 1-0:1.0: hub_resume
<7>hub 1-0:1.0: port 2: status 0107 change 0000
<7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
<7>usb 1-2: usb resume
<7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0004
<7>ohci-omap ohci-omap.0: GetStatus roothub.portstatus [1] = 0x00040103 PSSC PPS PES CCS
<7>usb 1-2: finish resume
<7>ohci-omap ohci-omap.0: urb c5bc9b40 path 2 ep0in 5ec20000 cc 5 --> status -62
<7>usb 1-2: retry with reset-resume
<7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0004
<7>ohci-omap ohci-omap.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
<6>usb 1-2: reset full speed USB device using ohci-omap and address 2
<7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0004
<7>ohci-omap ohci-omap.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
<7>usb 1-2: ep0 maxpacket = 16
<4>mma7660fc_ctrl_ioctl: Set polling delay 200
<4>usb_switch_print_state: 3 ATTACHED_HOST
<4>
<4>usb_switch_print_state: 3 ATTACHED_HOST
<4>
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v5 enabled 0
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v8 enabled 0
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb3v1 enabled 0
<6>musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb3v1 enabled 1
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v8 enabled 1
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v5 enabled 1
<6>musb_hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92
<6>musb_hdrc musb_hdrc: MUSB HDRC host driver
<7>/mnt/flash/releases/G8A/AX08_r2.1.2/arcbuild/linux/drivers/usb/core/inode.c: creating file '002'
<6>musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
<7>usb usb2: default language 0x0409
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: MUSB HDRC host driver
<6>usb usb2: Manufacturer: Linux 2.6.29-omap1 musb-hcd
<6>usb usb2: SerialNumber: musb_hdrc
<7>usb usb2: uevent
<7>usb usb2: usb_probe_device
<6>usb usb2: configuration #1 chosen from 1 choice
<7>usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>usb 2-0:1.0: uevent
<7>hub 2-0:1.0: usb_probe_interface
<7>hub 2-0:1.0: usb_probe_interface - got id
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
<7>hub 2-0:1.0: standalone hub
<7>hub 2-0:1.0: individual port power switching
<7>hub 2-0:1.0: no over-current protection
<7>hub 2-0:1.0: power on to power good time: 10ms
<7>hub 2-0:1.0: 100mA bus power budget for each child
<7>hub 2-0:1.0: local power source is good
<7>hub 2-0:1.0: enabling power on all ports
<7>/mnt/flash/releases/G8A/AX08_r2.1.2/arcbuild/linux/drivers/usb/core/inode.c: creating file '001'
<7>hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002
<7>hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
<7>hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
<6>usb 2-1: new high speed USB device using musb_hdrc and address 2
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<3>usb 2-1: device descriptor read/64, error -110
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<3>usb 2-1: device descriptor read/64, error -110
<6>usb 2-1: new high speed USB device using musb_hdrc and address 3
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<3>usb 2-1: device descriptor read/64, error -110
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<3>usb 2-1: device descriptor read/64, error -110
<6>usb 2-1: new high speed USB device using musb_hdrc and address 4
...and no external drive presented
Help!!! What should I do?
Decided ...
There was no connection between contact 4 and signal ground on usb-microusb adapter.
P.S. But this adapter works properly with HP Voice Messenger ...
So I've seen plenty of topics about other phones but had a difficult time finding anything regarding the HTC legend. I've already soldered my USB to micro USB and took a blade to a micro usb charger cord.
What I'm unsure about is how to tell if I went into USB host mode or not using the micro usb input I've got. It didn't have any noticable resistor on it, this is from a wall to phone charger if that matters.
I'm using Cyanogenmod 7.0 RC2
From what it looks like there's only the solder points for that + and - wires
Picture of micro usb input: http://i42.tinypic.com/116i493.jpg
Everything in one happy picture(do not click if bad soldering makes you cry): http://i41.tinypic.com/2ykxbtu.jpg
When I connected a mouse I don't use to see if the light would come on but that wasn't promising. I removed the micro usb when the little skateboarding startup logo showed and waited for the phone to start, when I plugged in my device dmesg only showed some ALS lines, which from short searching revealed it was something regarding GSM, but nothing regarding a mouse or anything about device.
Now I'm not expecting to use a USB mouse I want to use a USB keyboard(roll-up ) I just don't have a USB keyboard right now to really test.
Thanks for your time.
I compiled the kernel ver 2.6.25 for htc legend (cyanogen 7.2 rom), applied the hack from Sven Killing, hacked a home made cable for usb host mode and tested keyboard and mouse and both work fine!
I made some changes on the kernel (Kconfig and ehci-msm7201.c / .h), if somebody need it i can upload my kernel.
my kernel dmesg:
...
<6>[ 0.260314] [DISP]mdp_probe: initialized
<6>[ 0.260986] usbcore: registered new interface driver usbfs
<6>[ 0.261322] usbcore: registered new interface driver hub
<6>[ 0.261688] usbcore: registered new device driver usb
<6>[ 0.262207] msm_i2c_probe
<6>[ 0.262542] msm_i2c_probe: clk_ctl 315, 400000 Hz
<6>[ 0.264587] Bluetooth: Core ver 2.15
<6>[ 0.264862] NET: Registered protocol family 31
<6>[ 0.265075] Bluetooth: HCI device and connection manager initialized
<6>[ 0.265441] Bluetooth: HCI socket layer initialized
<6>[ 0.265838] Switching to clocksource gp_timer
<6>[ 0.267547] NET: Registered protocol family 2
<6>[ 0.267944] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.268798] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.269531] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.270294] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.270507] TCP reno registered
<6>[ 0.270874] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.271087] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.271697] NET: Registered protocol family 1
<6>[ 0.272155] Unpacking initramfs...
<6>[ 0.291229] Freeing initrd memory: 144K
...
<6>[ 0.692687] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.692871] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 0.694946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[ 0.695343] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
<7>[ 0.695678] usb_hcd_msm7201_probe()
<7>[ 0.695861] initializing MSM7201/QSD8X50/MSM7227 USB Controller
<6>[ 0.716461] msm_hsusb msm_hsusb: Qualcomm MSM7201/QSD8X50/MSM7227 On-Chip EHCI Host Controller
<6>[ 0.716888] msm_hsusb msm_hsusb: new USB bus registered, assigned bus number 1
<7>[ 0.717132] msm_hsusb msm_hsusb: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
<7>[ 0.717620] msm_hsusb msm_hsusb: park 0
<7>[ 0.717834] msm_hsusb msm_hsusb: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 0.718261] msm_hsusb msm_hsusb: irq 47, io mem 0xa0800000
<6>[ 0.737243] hub 1-0:1.0: USB hub found
<6>[ 0.737457] hub 1-0:1.0: 1 port detected
<4>[ 0.738037] ------------[ cut here ]------------
<4>[ 0.738433] WARNING: at kernel/irq/manage.c:290 enable_irq+0x5c/0xb4()
<4>[ 0.738616] Unbalanced enable for IRQ 47
<4>[ 0.738983] Modules linked in:
<4>[ 0.739410] [<c00359e8>] (unwind_backtrace+0x0/0xf0) from [<c0072068>] (warn_slowpath_common+0x4c/0x64)
<4>[ 0.739807] [<c0072068>] (warn_slowpath_common+0x4c/0x64) from [<c0072100>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 0.740203] [<c0072100>] (warn_slowpath_fmt+0x2c/0x3c) from [<c00aa6a4>] (enable_irq+0x5c/0xb4)
<4>[ 0.740417] [<c00aa6a4>] (enable_irq+0x5c/0xb4) from [<c0275714>] (usb_hcd_msm7201_probe+0x25c/0x30c)
<4>[ 0.740814] [<c0275714>] (usb_hcd_msm7201_probe+0x25c/0x30c) from [<c0245e44>] (platform_drv_probe+0x18/0x1c)
<4>[ 0.741210] [<c0245e44>] (platform_drv_probe+0x18/0x1c) from [<c0244fb8>] (driver_probe_device+0xa8/0x158)
<4>[ 0.741607] [<c0244fb8>] (driver_probe_device+0xa8/0x158) from [<c02450c8>] (__driver_attach+0x60/0x84)
<4>[ 0.741973] [<c02450c8>] (__driver_attach+0x60/0x84) from [<c024480c>] (bus_for_each_dev+0x48/0x84)
<4>[ 0.742370] [<c024480c>] (bus_for_each_dev+0x48/0x84) from [<c0244144>] (bus_add_driver+0x9c/0x21c)
<4>[ 0.742584] [<c0244144>] (bus_add_driver+0x9c/0x21c) from [<c0245398>] (driver_register+0xa8/0x138)
<4>[ 0.742980] [<c0245398>] (driver_register+0xa8/0x138) from [<c0019938>] (ehci_hcd_init+0xac/0x108)
<4>[ 0.743377] [<c0019938>] (ehci_hcd_init+0xac/0x108) from [<c0030384>] (do_one_initcall+0x5c/0x1b0)
<4>[ 0.743743] [<c0030384>] (do_one_initcall+0x5c/0x1b0) from [<c0008410>] (kernel_init+0xb0/0x16c)
<4>[ 0.744140] [<c0008410>] (kernel_init+0xb0/0x16c) from [<c00318a8>] (kernel_thread_exit+0x0/0x8)
<4>[ 0.744384] ---[ end trace a88e7bb8f2db6923 ]---
<6>[ 0.745025] android init
<6>[ 0.745269] android_probe pdata: c0537a70
<6>[ 0.745635] f_adb init
<6>[ 0.745819] android_register_function adb
<6>[ 0.746032] f_mass_storage init
<6>[ 0.746276] fsg_probe pdev: c0537bd8, pdata: c05383bc
<6>[ 0.746795] android_register_function usb_mass_storage
<6>[ 0.746978] f_rndis init
<6>[ 0.747314] android_register_function rndis
<6>[ 0.747650] f_accessory init
<6>[ 0.747863] android_register_function accessory
<3>[ 0.748626] msm_i2c msm_i2c.0: error, status c8 (20,E4,00)(20,F4,00)(cnt:1,pos:0)
<3>[ 0.749053] msm_i2c msm_i2c.0: Error during data xfer (-5) (20,E4,00)
<6>[ 0.856872] synaptics_ts_probe: Product Major Version 1
<6>[ 0.857421] synaptics_ts_probe: Product Minor Version 3
<6>[ 0.857940] synaptics_ts_probe: product property 2
<6>[ 0.858642] synaptics_ts_probe: device control 81
<6>[ 0.859191] synaptics_ts_probe: interrupt enable 1
<6>[ 0.877288] synaptics_ts_probe: 0xe0: 1 1 1 2 1 3 0 0
<6>[ 0.896911] synaptics_ts_probe: Sensor properties 701
<6>[ 0.976715] synaptics_ts_probe: max_x 3668, max_y 5460
<6>[ 0.976928] synaptics_ts_probe: inactive_x -11 -11, inactive_y -11 -11
<6>[ 0.977294] synaptics_ts_probe: snap_x 0-0 0-0, snap_y 0-0 0-0
<6>[ 0.977508] synaptics_ts_probe: margin_pixel_left: 0, margin_pixel_right: 0, margin_pixel_top: 0, margin_pixel_bottom: 0
<6>[ 0.977874] synaptics_ts_probe: ts_raw_width: 3646, ts_raw_height: 5438
....
<6>[ 2.079620] [KEY] GPIO Matrix Keypad Driver: Start keypad matrix for legend-keypad in interrupt mode
<6>[ 2.080291] [KEY] GPIO Input Driver: Start gpio inputs for legend-keypad in interrupt mode
<6>[ 2.081024] input: legend-keypad as /devices/virtual/input/input3
<6>[ 2.082214] input: lightsensor-level as /devices/virtual/input/input4
<6>[ 2.082977] [LS][CM3602] set_ls_kvalue: ALS calibrated als_kadc=0x6da50053
<6>[ 2.083160] [LS][CM3602] set_ls_kvalue: als_kadc=0x53, als_gadc=0xc0
<6>[ 2.083374] [LS][CM3602] ls_table: data[0] , data[0] = 0, 0
<6>[ 2.083740] [LS][CM3602] ls_table: data[1] , data[1] = 0, e
<6>[ 2.083953] [LS][CM3602] ls_table: data[2] , data[2] = 0, 21
<6>[ 2.084320] [LS][CM3602] ls_table: data[3] , data[3] = 0, 5f
<6>[ 2.084503] [LS][CM3602] ls_table: data[4] , data[4] = 0, 85
<6>[ 2.084869] [LS][CM3602] ls_table: data[5] , data[5] = 0, ab
<6>[ 2.085083] [LS][CM3602] ls_table: data[6] , data[6] = 0, d1
<6>[ 2.085449] [LS][CM3602] ls_table: data[7] , data[7] = 1, 2d
<6>[ 2.085632] [LS][CM3602] ls_table: data[8] , data[8] = 1, 73
<6>[ 2.086029] [KEY] gpio_keys_scan_keys: key 1-116, 0 (20) changed to 0
<6>[ 2.086242] [LS][CM3602] ls_table: data[9] , data[9] = 3, ff
<7>[ 2.088623] __capella_cm3602_power: Turn the capella_cm3602 power on
<6>[ 2.089141] using input dev h2w headset for key reset
<6>[ 2.089538] using input dev legend-keypad for key reset
<6>[ 2.090332] input: curcial-oj as /devices/virtual/input/input5
<6>[ 2.090881] using input dev curcial-oj for key reset
<3>[ 2.092376] curcial_oj_poweronJower status ok
<6>[ 2.140625] OpticalJoystick Device ID: 0d
<6>[ 2.143493] OJ Driver: Revision : 02
<6>[ 2.146240] OJ: driver loaded
<6>[ 2.147460] using rtc device, msm_rtc, for alarms
<6>[ 2.147857] rs30000048:00010004 rs30000048:00010004: rtc core: registered msm_rtc as rtc0
<6>[ 2.148468] AKM8973 compass driver: init
<6>[ 2.149536] input: compass as /devices/virtual/input/input6
<6>[ 2.150421] [FLT]adp1650 Led Flash driver: init
<4>[ 2.150848] [CAM]s5k4e1gx_init
<4>[ 2.151123] [CAM]__s5k4e1gx_probe
<6>[ 2.151336] [CAM]s5k4e1gx_vreg_enable camera vreg on
<3>[ 2.151672] [CAM]sensor platform_data didnt register
<3>[ 2.151885] [CAM]__s5k4e1gx_probe fail sensor power on error
<6>[ 2.152404] [CAM]sctrl.node 0
<4>[ 2.152587] [CAM]s5k4e1gx_sensor_probe()
<6>[ 2.152832] [CAM]s5k4e1gx_probe called!
<6>[ 2.203308] [CAM]s5k4e1gx_probe successed! rc = 0
<6>[ 2.203552] [CAM]s5k4e1gx s->node 0
<6>[ 2.249176] [CAM]s5k4e1gx_sensor_init(): reseting sensor.
<6>[ 2.250305] [CAM]sensor_lc_disable=0
<4>[ 2.334533] [CAM]sensor evt version : 0x10
<4>[ 2.334716] [CAM]use analog_settings_evt3
<6>[ 2.345367] s5k4e1gx_sysfs_init : kobject_create_and_add
<6>[ 2.345581] s5k4e1gx_sysfs_init : sysfs_create_file
<6>[ 2.346893] device-mapper: uevent: version 1.0.3
<6>[ 2.347534] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
<6>[ 2.348144] Bluetooth: HCI UART driver ver 2.2
<6>[ 2.348358] Bluetooth: HCI H4 protocol initialized
<6>[ 2.348724] Bluetooth: HCILL protocol initialized
<7>[ 2.349731] msmsdcc_platform_status_irq: 102
<6>[ 2.349945] mmc0: Slot status change detected (0 -> 1)
<4>[ 2.350402] legend_sdslot_switchvdd::vdd=00000000 sdslot_vdd=ffffffff
<6>[ 2.350769] legend_sdslot_switchvdd: Disabling SD slot power
<4>[ 2.350982] off:MCI_Power=00000000
<4>[ 2.351165] off:MCI_Power=00000000
<6>[ 2.353820] mmc0: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,102 dma 8
<6>[ 2.354003] mmc0: Platform slot type: SD
<6>[ 2.354370] mmc0: 4 bit data mode enabled
<6>[ 2.354583] mmc0: 8 bit data mode disabled
<6>[ 2.354766] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 100000000 Hz
<6>[ 2.355133] mmc0: Slot eject status = 0
<6>[ 2.355346] mmc0: Power save feature enable = 1
<6>[ 2.355712] mmc0: DM non-cached buffer at ffa4a000, dma_addr 0x25669000
<6>[ 2.355895] mmc0: DM cmd busaddr 0x25669000, cmdptr busaddr 0x25669300
<7>[ 2.356689] Registered led device: amber
<7>[ 2.357055] Registered led device: green
<7>[ 2.357360] Registered led device: button-backlight
<6>[ 2.357757] microp_led_probe: succeeded
<6>[ 2.358612] usbcore: registered new interface driver usbhid
<6>[ 2.359008] usbhid: USB HID core driver
<6>[ 2.359741] logger: created 64K log 'log_main'
<6>[ 2.360076] logger: created 256K log 'log_events'
<6>[ 2.360565] logger: created 64K log 'log_radio'
<6>[ 2.360900] logger: created 64K log 'log_system'
<6>[ 2.361511] GACT probability NOT on
<6>[ 2.361724] Mirror/redirect action on
<6>[ 2.361938] u32 classifier
<6>[ 2.362121] Actions configured
<6>[ 2.362487] Netfilter messages via NETLINK v0.30.
<6>[ 2.362792] nf_conntrack version 0.5.0 (4653 buckets, 18612 max)
<4>[ 2.363464] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[ 2.363677] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[ 2.364044] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<6>[ 2.364654] ctnetlink v0.93: registering with nfnetlink.
<6>[ 2.365112] xt_time: kernel timezone is -0000
<6>[ 2.365661] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.366210] arp_tables: (C) 2002 David S. Miller
<6>[ 2.366485] TCP cubic registered
<6>[ 2.367309] NET: Registered protocol family 10
<6>[ 2.368255] lo: Disabled Privacy Extensions
<6>[ 2.369659] Mobile IPv6
<6>[ 2.370025] IPv6 over IPv4 tunneling driver
<6>[ 2.370910] sit0: Disabled Privacy Extensions
<6>[ 2.371887] ip6tnl0: Disabled Privacy Extensions
<6>[ 2.372406] NET: Registered protocol family 17
<6>[ 2.372650] NET: Registered protocol family 15
<6>[ 2.373229] Bluetooth: L2CAP ver 2.14
<6>[ 2.373413] Bluetooth: L2CAP socket layer initialized
<6>[ 2.373626] Bluetooth: SCO (Voice Link) ver 0.6
<6>[ 2.373992] Bluetooth: SCO socket layer initialized
<6>[ 2.374328] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.374694] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.374877] Bluetooth: RFCOMM ver 1.11
<6>[ 2.375091] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.375457] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.376251] clock_late_init() disabled 20 unused clocks
<6>[ 2.376617] [Port list] init()
<6>[ 2.376892] [Port list] Virtual Address for port_list: [f8185a38]
<6>[ 2.377258] [Port list] Physical Address for port_list: [185A38]
<4>[ 2.378417] legend_wifi_init: start
<6>[ 2.379028] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<6>[ 2.381317] rs30000048:00010004 rs30000048:00010004: setting system clock to 2012-07-25 19:15:10 UTC (1343243710)
<4>[ 2.381774] Warning: unable to open an initial console.
<6>[ 2.382202] Freeing init memory: 160K
<3>[ 2.386505] init: /init.legend.rc: 1: invalid command 'device'
<4>[ 2.447052] legend_sdslot_switchvdd::vdd=00000011 sdslot_vdd=00000000
<6>[ 2.447509] legend_sdslot_switchvdd: Setting level to 2900
<4>[ 2.452728] on:MCI_Power=00000042
<4>[ 2.458099] on:MCI_Power=00000043
<6>[ 2.508544] yaffs: dev is 32505859 name is "mtdblock3" rw
<6>[ 2.508758] yaffs: passed flags ""
<7>[ 2.509155] yaffs: Attempting MTD mount of 31.3,"mtdblock3"
<4>[ 2.546569] legend_sdslot_switchvdd::vdd=00000010 sdslot_vdd=00000011
<6>[ 2.546936] legend_sdslot_switchvdd: Setting level to 2850
<7>[ 2.692291] yaffs: restored from checkpoint
<7>[ 2.693237] yaffs_read_super: isCheckpointed 1
<6>[ 2.697631] yaffs: dev is 32505861 name is "mtdblock5" rw
<6>[ 2.698059] yaffs: passed flags ""
<7>[ 2.698272] yaffs: Attempting MTD mount of 31.5,"mtdblock5"
<4>[ 2.756988] mmc0: high speed mode but max_dtr = 50000000
<4>[ 2.757629] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[ 2.758026] mmc0: new high speed SDHC card at address 80e6
<6>[ 2.758819] mmcblk0: mmc0:80e6 SU08G 7.40 GiB
<6>[ 2.759674] mmcblk0: p1
<7>[ 2.856689] block 195 is bad
<7>[ 2.889587] block 408 is bad
<7>[ 2.995269] block 1089 is bad
<7>[ 4.499725] yaffs_read_super: isCheckpointed 0
<6>[ 4.500366] yaffs: dev is 32505860 name is "mtdblock4" rw
<6>[ 4.500579] yaffs: passed flags ""
<7>[ 4.500915] yaffs: Attempting MTD mount of 31.4,"mtdblock4"
<7>[ 4.594360] yaffs_read_super: isCheckpointed 0
<3>[ 5.087188] init: service 'console' requires console
<6>[ 5.102844] [Port list] Add port [5555]
<6>[ 5.103179] [Port list] [1] = 5555
<6>[ 5.295257] warning: `rild' uses 32-bit capabilities (legacy support in use)
<6>[ 5.380798] [SMD]SMD: ch 0 0 -> 1
<6>[ 5.381103] [SMD]SMD: ch 0 1 -> 2
<6>[ 5.389373] [SMD]SMD: ch 39 0 -> 1
<6>[ 5.389648] [SMD]SMD: ch 39 1 -> 2
<6>[ 5.389862] qmi: smd opened
<6>[ 5.390686] qmi: ctl: wds use client_id 0x01
<6>[ 5.391693] [SMD]SMD: ch 40 0 -> 1
<6>[ 5.391937] [SMD]SMD: ch 41 0 -> 1
<6>[ 5.392150] [SMD]SMD: ch 40 1 -> 2
<6>[ 5.392486] qmi: smd opened
<6>[ 5.392700] [SMD]SMD: ch 41 1 -> 2
<6>[ 5.392913] qmi: smd opened
<6>[ 5.393707] qmi: ctl: wds use client_id 0x01
<6>[ 5.393920] qmi: ctl: wds use client_id 0x01
<6>[ 6.343536] [AUD][snd.c:snd_ioctl] snd_set_device 1 1 1
<6>[ 6.344940] [AUD][snd.c:snd_rpc_thread] snd_rpc_thread() start
<6>[ 6.345306] [AUD][snd.c:snd_rpc_thread] snd: rpc_reply status 0
<6>[ 6.347076] [AUD][snd.c:snd_ioctl] snd_set_volume 256 0 5
<6>[ 6.348754] [AUD][snd.c:snd_rpc_thread] snd: rpc_reply status 0
<6>[ 12.975891] [DISP]msmfb: pan_update in state(1)
<6>[ 12.975891] [DISP]msmfb: full update starting
<6>[ 13.022674] [DISP]msmfb: full update completed
<6>[ 13.022918] [DISP]msmfb: turning on panel
<6>[ 13.023132] [DISP]lcdc_unblank: ()
<7>[ 13.023498] oled_panel_unblank type 0
<7>[ 13.023681] already unblank
<6>[ 13.158996] msm_kgsl: initilized dev=1 mmu=on
<7>[ 13.230957] [LS][CM3602] lightsensor_ioctl: get enabled status: 0
<6>[ 13.231597] [PS][CM3602] capella_cm3602_disable
<7>[ 13.231964] [PS][CM3602] capella_cm3602_disable: already disabled
<6>[ 13.232177] [PS][CM3602] capella_cm3602_disable
<7>[ 13.232360] [PS][CM3602] capella_cm3602_disable: already disabled
<2>[ 13.481384] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.481872] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.482208] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<3>[ 13.489410] kgsl kgsl: |kgsl_ioctl_sharedmem_free| invalid gpuaddr 000000a3
<2>[ 13.496582] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.497070] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.497467] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0004924b
<3>[ 13.498870] kgsl kgsl: |kgsl_ioctl_sharedmem_free| invalid gpuaddr 000000a3
<2>[ 13.569274] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.569671] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0002724b
<3>[ 13.570648] kgsl kgsl: |kgsl_ioctl_sharedmem_free| invalid gpuaddr 000000a3
<2>[ 13.756134] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.756591] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<3>[ 13.756927] kgsl kgsl: |kgsl_ioctl_sharedmem_free| invalid gpuaddr 000000a3
<6>[ 20.758483] [BATT] SMEM_BATT: get_batt_info: batt_id=4, batt_vol=3704, batt_temp=347, batt_current=1, eval_current=0, level=34, charging_source=0, charging_enabled=0, full_bat=1300000, over_vchg=0 hv_enabled=0 at 20751727586 (2012-07-25 19:15:28.862563728 UTC)
<6>[ 20.759552] [BATT] SMEM_BATT: get_batt_info: batt_id=4, batt_vol=3704, batt_temp=347, batt_current=1, eval_current=0, level=34, charging_source=0, charging_enabled=0, full_bat=1300000, over_vchg=0 hv_enabled=0 at 20752795701 (2012-07-25 19:15:28.863631844 UTC)
<6>[ 20.813812] [VIB] er.ServerThread(parent:zygote): vibrates 0 msec
<6>[ 21.683471] [AUD][snd.c:snd_ioctl] snd_set_volume 256 0 4
<6>[ 21.685272] [AUD][snd.c:snd_rpc_thread] snd: rpc_reply status 0
<6>[ 22.412597] [VIB] er.ServerThread(parent:zygote): vibrates 0 msec
<6>[ 22.425964] [VIB] Thread-43(parent:zygote): vibrates 1 msec
<6>[ 22.427124] [ATS][set_vibration][successful]
<6>[ 22.427368] [VIB]vibrator_timer_func
<7>[ 22.432891] [LS][CM3602] lightsensor_ioctl: set value = 1
<6>[ 22.432922] [LS][CM3602] lightsensor_enable
<6>[ 22.436004] request_suspend_state: wakeup (3->0) at 22428485397 (2012-07-25 19:15:30.540084479 UTC)
<4>[ 22.442443] set_backlight_level:11
<6>[ 22.448455] [VIB] Thread-43(parent:zygote): vibrates 21 msec
<6>[ 22.450683] [ATS][set_vibration][successful]
<6>[ 22.469848] [VIB]vibrator_timer_func
<6>[ 22.764556] [LS][CM3602] ALS value: 0x0, level: 1 #
<6>[ 24.199127] [GSNR] Gsensor enable
<4>[ 24.610534] set_backlight_level:27
<6>[ 31.914062] [CAM]led_ril_status_value = 0
<6>[ 31.914398] phone_call_status_store: phone_call_status 0
<6>[ 31.914672] [CAM]led_ril_status_value = 0
<6>[ 31.915069] phone_call_status_store: phone_call_status 0
<6>[ 33.601135] [email protected], 4102
<6>[ 33.606445] [VIB] WindowManagerPo(parent:zygote): vibrates 0 msec
<6>[ 33.638183] [VIB] Thread-60(parent:zygote): vibrates 10 msec
<6>[ 33.639495] [ATS][set_vibration][successful]
<6>[ 33.648406] [VIB]vibrator_timer_func
<6>[ 33.668975] [VIB] Thread-60(parent:zygote): vibrates 30 msec
<6>[ 33.670318] [ATS][set_vibration][successful]
<6>[ 33.699432] [VIB]vibrator_timer_func
<6>[ 33.785430] [email protected], 3759
<6>[ 34.171966] [VIB] WindowManagerPo(parent:zygote): vibrates 0 msec
<6>[ 34.184417] [VIB] Thread-61(parent:zygote): vibrates 10 msec
<6>[ 34.185485] [ATS][set_vibration][successful]
<6>[ 34.194824] [VIB]vibrator_timer_func
<6>[ 34.215423] [VIB] Thread-61(parent:zygote): vibrates 30 msec
<6>[ 34.216613] [ATS][set_vibration][successful]
<6>[ 34.245849] [VIB]vibrator_timer_func
<6>[ 46.455596] [KEY] gpiomatrix: key 158, 2-0 (33-42) changed to 1
<6>[ 46.455993] [ATS][press_back][complete]
<6>[ 46.695861] [KEY] gpiomatrix: key 158, 2-0 (33-42) changed to 0
<6>[ 60.297607] Release 'boot-time' no_halt_lock
<7>[ 83.004089] msm_hsusb msm_hsusb: GetStatus port 1 status 8c001002 POWER sig=se0 CSC
<7>[ 83.077819] msm_hsusb msm_hsusb: GetStatus port 1 status 84001403 POWER sig=k CSC CONNECT
<6>[ 83.357788] usb 1-1: new low speed USB device using msm_hsusb and address 2
<7>[ 83.417724] msm_hsusb msm_hsusb: port 1 high speed
<7>[ 83.418640] msm_hsusb msm_hsusb: GetStatus port 1 status 84001405 POWER sig=k PE CONNECT
<6>[ 83.541931] input: USB-compliant keyboard as /devices/platform/msm_hsusb/usb1/1-1/1-1:1.0/input/input7
<7>[ 83.543029] usb 1-1: link qh8-0601/c61abca0 start 1 [1/2 us]
<6>[ 83.547912] using input dev USB-compliant keyboard for key reset
<6>[ 83.628845] generic-usb 0003:062A:0201.0001: input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-msm_hsusb-1/input0
<6>[ 83.720245] input: USB-compliant keyboard as /devices/platform/msm_hsusb/usb1/1-1/1-1:1.1/input/input8
<7>[ 83.725402] usb 1-1: link qh8-0601/c8fdf520 start 2 [1/2 us]
<6>[ 83.725982] using input dev USB-compliant keyboard for key reset
<6>[ 83.753570] generic-usb 0003:062A:0201.0002: input: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-msm_hsusb-1/input1
<6>[ 84.002807] [BATT] M2A_RPC: cable_update: USB at 83995563030 (2012-07-25 19:16:32.106887454 UTC)
<6>[ 84.003417] [BATT] htc_cable_status_update: 0 -> 1
<6>[ 84.003631] [USB] msm_hsusb_set_vbus_state: 1
<6>[ 157.127685] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 1
<6>[ 157.346679] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 0
<6>[ 165.024993] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 1
<6>[ 165.180328] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 0
<6>[ 202.730560] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 1
<6>[ 202.885864] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 0
I've been looking at getting external USB audio (using an external USB DAC for sound) working on my HTC One XL for a bit now, and I'm starting to hit a wall...
I've built a new custom kernel based of the base CyanogenMod one for the MSM8960. This works
I've turned on a ton of debugging + added more debugging, and compiled in the USB Audio drivers, my kernel logs now look something like:
<6>[ 192.232076] usb 1-1: new full speed USB device number 2 using msm_hsusb_host
<6>[ 192.387639] usb 1-1: New USB shizzle found, idVendor=045e, idProduct=070f
<6>[ 192.387730] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
<6>[ 192.387852] usb 1-1: Product: Microsoft LifeChat LX-3000
<7>[ 192.387913] device: '1-1': device_add
<7>[ 192.388280] bus: 'usb': add device 1-1
<7>[ 192.388402] PM: Adding info for usb:1-1
<7>[ 192.388890] bus: 'usb': driver_probe_device: matched device 1-1 with driver usb
<7>[ 192.389012] bus: 'usb': really_probe: probing driver usb with device 1-1
<7>[ 192.389073] usb 1-1: usb_probe_device
<7>[ 192.389195] usb 1-1: configuration #1 chosen from 1 choice
<7>[ 192.389256] usb 1-1: rpm_resume flags 0x4
<7>[ 192.389317] usb 1-1: rpm_resume returns 1
<7>[ 192.390599] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
<7>[ 192.390660] device: '1-1:1.0': device_add
<7>[ 192.390782] bus: 'usb': add device 1-1:1.0
<7>[ 192.390874] PM: Adding info for usb:1-1:1.0
<7>[ 192.391118] bus: 'usb': driver_probe_device: matched device 1-1:1.0 with driver snd-usb-audio
<7>[ 192.391240] bus: 'usb': really_probe: probing driver snd-usb-audio with device 1-1:1.0
<7>[ 192.391362] snd-usb-audio 1-1:1.0: usb_probe_interface
<7>[ 192.391423] snd-usb-audio 1-1:1.0: usb_probe_interface - got id
<7>[ 192.391545] usb 1-1: rpm_resume flags 0x4
<7>[ 192.391606] usb 1-1: rpm_resume returns 1
<6>[ 192.392583] 2:1:0: add audio endpoint Interface Class = 1
<6>[ 192.392644] 2:1:0: add audio endpoint Interface SubClass = 2
<6>[ 192.392736] 2:1:0: add audio endpoint Interface Class = 1
<6>[ 192.392797] 2:1:0: add audio endpoint Interface SubClass = 2
<6>[ 192.392919] 2:1:1: UAC Version 1
<6>[ 192.392980] 2:1:1: add audio endpoint 0x1
<6>[ 192.396581] 2:2:0: add audio endpoint Interface Class = 1
<6>[ 192.396673] 2:2:0: add audio endpoint Interface SubClass = 2
<6>[ 192.396734] 2:2:0: add audio endpoint Interface Class = 1
<6>[ 192.396856] 2:2:0: add audio endpoint Interface SubClass = 2
<6>[ 192.396917] 2:2:1: UAC Version 1
<6>[ 192.396978] 2:2:1: add audio endpoint 0x82
<6>[ 192.400579] [13] FU [Mic Playback Switch] ch = 1, val = 0/1/1
<3>[ 192.400640] Unable to resume device, either shutdown or probing (0,1)
<3>[ 192.400762] cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xd00, type = 4, error = -19
<3>[ 192.400885] 13:0: cannot get min/max values for control 2 (id 13)
<3>[ 192.400976] Unable to resume device, either shutdown or probing (0,1)
<3>[ 192.401098] cannot get ctl value: req = 0x84, wValue = 0x200, wIndex = 0xd00, type = 4, error = -19
<6>[ 192.401220] [13] FU [Mic Playback Volume] ch = 1, val = 0/1/1
<6>[ 192.401281] [9] FU [Speaker Playback Switch] ch = 1, val = 0/1/1
<3>[ 192.401403] Unable to resume device, either shutdown or probing (0,1)
<3>[ 192.401464] cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0x900, type = 4, error = -19
<3>[ 192.401587] 9:0: cannot get min/max values for control 2 (id 9)
<3>[ 192.401648] Unable to resume device, either shutdown or probing (0,1)
<3>[ 192.401739] cannot get ctl value: req = 0x84, wValue = 0x201, wIndex = 0x900, type = 4, error = -19
<6>[ 192.401861] [9] FU [Speaker Playback Volume] ch = 2, val = 0/1/1
<6>[ 192.401922] [10] FU [Mic Capture Switch] ch = 1, val = 0/1/1
<3>[ 192.402044] Unable to resume device, either shutdown or probing (0,1)
<3>[ 192.402136] cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xa00, type = 4, error = -19
<3>[ 192.402258] 10:0: cannot get min/max values for control 2 (id 10)
<3>[ 192.402350] Unable to resume device, either shutdown or probing (0,1)
<3>[ 192.402441] cannot get ctl value: req = 0x84, wValue = 0x200, wIndex = 0xa00, type = 4, error = -19
<6>[ 192.402533] [10] FU [Mic Capture Volume] ch = 1, val = 0/1/1
<6>[ 192.402655] [10] FU [Auto Gain Control] ch = 1, val = 0/1/1
<7>[ 192.402746] device: 'card1': device_add
<7>[ 192.402868] PM: Adding info for No Bus:card1
<7>[ 192.403174] device: 'pcmC1D0p': device_add
<7>[ 192.403418] PM: Adding info for No BuscmC1D0p
<7>[ 192.403906] device: 'pcmC1D0c': device_add
<7>[ 192.404059] PM: Adding info for No BuscmC1D0c
<7>[ 192.404455] device: 'controlC1': device_add
<7>[ 192.404669] PM: Adding info for No Bus:controlC1
<7>[ 192.405035] driver: '1-1:1.0': driver_bound: bound to device 'snd-usb-audio'
<7>[ 192.405157] bus: 'usb': really_probe: bound device 1-1:1.0 to driver snd-usb-audio
<7>[ 192.405218] snd-usb-audio 1-1:1.0: rpm_suspend flags 0x4
<7>[ 192.405310] snd-usb-audio 1-1:1.0: rpm_suspend returns 0
<7>[ 192.405402] usb 1-1: adding 1-1:1.1 (config #1, interface 1)
<7>[ 192.405493] device: '1-1:1.1': device_add
<7>[ 192.405585] bus: 'usb': add device 1-1:1.1
<7>[ 192.405707] PM: Adding info for usb:1-1:1.1
<7>[ 192.405981] driver: '1-1:1.1': driver_bound: bound to device 'snd-usb-audio'
<7>[ 192.406104] usb 1-1: adding 1-1:1.2 (config #1, interface 2)
<7>[ 192.406165] device: '1-1:1.2': device_add
<7>[ 192.406256] bus: 'usb': add device 1-1:1.2
<7>[ 192.406378] PM: Adding info for usb:1-1:1.2
<7>[ 192.406622] driver: '1-1:1.2': driver_bound: bound to device 'snd-usb-audio'
<7>[ 192.406744] usb 1-1: adding 1-1:1.3 (config #1, interface 3)
<7>[ 192.406806] device: '1-1:1.3': device_add
<7>[ 192.406958] bus: 'usb': add device 1-1:1.3
<7>[ 192.407019] PM: Adding info for usb:1-1:1.3
<7>[ 192.408240] bus: 'usb': driver_probe_device: matched device 1-1:1.3 with driver usbhid
<7>[ 192.408362] bus: 'usb': really_probe: probing driver usbhid with device 1-1:1.3
<7>[ 192.408484] usbhid 1-1:1.3: usb_probe_interface
<7>[ 192.408545] usbhid 1-1:1.3: usb_probe_interface - got id
<7>[ 192.408667] usb 1-1: rpm_resume flags 0x4
<7>[ 192.408728] usb 1-1: rpm_resume returns 1
<7>[ 192.408850] device: '0003:045E:070F.0001': device_add
<7>[ 192.408972] bus: 'hid': add device 0003:045E:070F.0001
<7>[ 192.409034] PM: Adding info for hid:0003:045E:070F.0001
<7>[ 192.409400] bus: 'hid': driver_probe_device: matched device 0003:045E:070F.0001 with driver generic-usb
<7>[ 192.409461] bus: 'hid': really_probe: probing driver generic-usb with device 0003:045E:070F.0001
<7>[ 192.411841] usbhid 1-1:1.3: rpm_resume flags 0x5
<7>[ 192.411963] usbhid 1-1:1.3: rpm_resume returns 1
<7>[ 192.413825] device: 'input7': device_add
<7>[ 192.413978] PM: Adding info for No Bus:input7
<6>[ 192.414344] input: Microsoft LifeChat LX-3000 as /devices/platform/msm_hsusb_host/usb1/1-1/1-1:1.3/input/input7
<7>[ 192.414466] device: 'event7': device_add
<7>[ 192.414771] PM: Adding info for No Bus:event7
<6>[ 192.415077] generic-usb 0003:045E:070F.0001: input: USB HID v1.00 Device [Microsoft LifeChat LX-3000 ] on usb-msm_hsusb_host-1/input3
<7>[ 192.415229] driver: '0003:045E:070F.0001': driver_bound: bound to device 'generic-usb'
<7>[ 192.415290] bus: 'hid': really_probe: bound device 0003:045E:070F.0001 to driver generic-usb
<7>[ 192.415412] driver: '1-1:1.3': driver_bound: bound to device 'usbhid'
<7>[ 192.415534] bus: 'usb': really_probe: bound device 1-1:1.3 to driver usbhid
....
Now the errors printed above, really don't matter (after much debugging, it appears to be a bug in ALSA, will look at fixing that later, but it isn't going to cause any issues from what I can tell).
So in conclusion, it looks like it successfully loaded USB_AUDIO drivers and the HID driver (the HID driver is for the volume control on the headset).
Now my logcat looks like:
E/WiredAccessoryObserver( 359): unsetting h2w flag
I/DockObserver( 359): Dock state changed: 16
V/WiredAccessoryObserver( 359): Headset UEVENT: {SUBSYSTEM=switch, SWITCH_STATE=16, DEVPATH=/devices/virtual/switch/dock, SEQNUM=3298, ACTION=change, SWITCH_NAME=dock}
V/WiredAccessoryObserver( 359): updateState name: dock state 16
V/WiredAccessoryObserver( 359): updateState switchState: 0
V/WiredAccessoryObserver( 359): newState = 0, headsetState = 0,mHeadsetState = 0
V/BluetoothService( 359): Received ACTION_DOCK_EVENT with State:16
E/SharedPreferencesImpl( 359): Couldn't create directory for SharedPreferences file shared_prefs/bluetooth_service_settings.xml
I/ActivityManager( 359): Start proc net.muteheadlight.dockredir for broadcast net.muteheadlight.dockredir/net.muteheadlight.docksoundredir.dockSoundRedirect: pid=3397 uid=10133 gids={1028}
D/ActivityThread( 3397): setTargetHeapUtilization:0.25
D/ActivityThread( 3397): setTargetHeapIdealFree:8388608
D/ActivityThread( 3397): setTargetHeapConcurrentStart:2097152
I/ActivityManager( 359): No longer want com.google.android.talk (pid 2959): hidden #16
D/EventHub( 359): No input device configuration file found for device 'Microsoft LifeChat LX-3000 '.
I/EventHub( 359): New device: id=8, fd=287, path='/dev/input/event7', name='Microsoft LifeChat LX-3000 ', classes=0x80000001, configuration='', keyLayout='/system/usr/keylayout/Generic.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
I/InputReader( 359): Device added: id=8, name='Microsoft LifeChat LX-3000 ', sources=0x00000101
To get this far, I had to manually trigger an Intent with Action of 'com.cyanogenmod.settings.SamsungDock'. Before sending that intent, the WiredAccessoryObserver would print 'Ignoring dock event as Audio routing disabled'.
After all this, no sound is routed to the external USb headset :crying:
I have a feeling the kernel is working as expected, but the Cyanogenmod rom is not correctly handling the dock event.The DockObserver class in cyanogenmod watches for events:
DOCK_UEVENT_MATCH = "DEVPATH=/devices/virtual/switch/dock";
And this is being sent by the kernel and received by the DockObserver, but from here it seems to try and load the deive as a smsung USB audio dock, instead of usb_audio.
My really big question is, how does this work on the Galaxy Nexus with only a kernel change to load the correct drivers....
Any input or pointing in the right direction would be great!!!! (if you've listened to my rant this far you've done well).
UPDATE:
The drivers appear to be working as I can use the 'USB Audio Tester' app from the play store to play the microphone into the headset.
So my issues appears to be getting CM10 to route audio through USB. Has anyone had this working before???
Can anyone help me how to connect Logitech C525 webcam to my Nexus 10 device?
I have OTG cable, and after connect webcam none exist /dev/video0
I think linux UVC supports c525 webcam, so i don't know why not work. :crying:
Tablet rooted, latest google rom installed.
Hello igabyka
What does 'dmesg' tells us when you connect your webcam ?
LeDuke said:
Hello igabyka
What does 'dmesg' tells us when you connect your webcam ?
Click to expand...
Click to collapse
[email protected]:/ $ su
[email protected]:/ # dmesg|grep usb
<6>[ 0.000000] sclk_usbdrd30: source is mout_mpll (0), rate is 66666666
<6>[ 0.667118] usbcore: registered new interface driver usbfs
<6>[ 0.667223] usbcore: registered new interface driver hub
<6>[ 0.667362] usbcore: registered new device driver usb
<6>[ 0.987692] usbcore: registered new interface driver asix
<6>[ 0.987826] usbcore: registered new interface driver cdc_ether
<6>[ 0.987912] usbcore: registered new interface driver net1080
<6>[ 0.988046] usbcore: registered new interface driver cdc_subset
<6>[ 0.988136] usbcore: registered new interface driver zaurus
<6>[ 0.988284] usbcore: registered new interface driver cdc_ncm
<6>[ 0.997410] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 0.997475] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 0.997587] usb usb1: Product: S5P EHCI Host Controller
<6>[ 0.997650] usb usb1: Manufacturer: Linux 3.4.39-g79b81c6 ehci_hcd
<6>[ 0.997762] usb usb1: SerialNumber: s5p-ehci
<6>[ 0.998601] usb usb1: USB disconnect, device number 1
<6>[ 1.056314] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 1.056381] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.056493] usb usb1: Product: EXYNOS OHCI Host Controller
<6>[ 1.056556] usb usb1: Manufacturer: Linux 3.4.39-g79b81c6 ohci_hcd
<6>[ 1.056666] usb usb1: SerialNumber: exynos-ohci
<6>[ 1.057519] usb usb1: USB disconnect, device number 1
<6>[ 1.058300] usbcore: registered new interface driver usblp
<6>[ 1.058503] usbcore: registered new interface driver usb-storage
<6>[ 1.060658] gadget: android_usb ready
<6>[ 1.060722] bound driver 'android_usb'
<6>[ 1.061199] usbcore: registered new interface driver xpad
<6>[ 1.061289] usbcore: registered new interface driver usb_acecad
<6>[ 1.061424] usbcore: registered new interface driver aiptek
<6>[ 1.061557] usbcore: registered new interface driver gtco
<6>[ 1.061642] usbcore: registered new interface driver hanwang
<6>[ 1.061733] usbcore: registered new interface driver kbtab
<6>[ 1.061867] usbcore: registered new interface driver wacom
<6>[ 1.395980] usbcore: registered new interface driver usbhid
<6>[ 1.396052] usbhid: USB HID core driver
<3>[ 4.473344] android_usb: already disabled
<6>[ 4.767362] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 4.767448] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 4.767524] usb usb1: Product: S5P EHCI Host Controller
<6>[ 4.767604] usb usb1: Manufacturer: Linux 3.4.39-g79b81c6 ehci_hcd
<6>[ 4.767651] usb usb1: SerialNumber: s5p-ehci
<6>[ 4.826458] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 4.826545] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 4.826623] usb usb2: Product: EXYNOS OHCI Host Controller
<6>[ 4.826666] usb usb2: Manufacturer: Linux 3.4.39-g79b81c6 ohci_hcd
<6>[ 4.826742] usb usb2: SerialNumber: exynos-ohci
<6>[ 5.097260] usb 1-1: new high-speed USB device number 2 using s5p-ehci
<6>[ 5.494603] usb 1-1: New USB device found, idVendor=046d, idProduct=0826
<6>[ 5.494663] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=1
<6>[ 5.494743] usb 1-1: Product: HD Webcam C525
<6>[ 5.494793] usb 1-1: SerialNumber: FA21CC50
[email protected]:/ #