[ROM][Unofficial_SlimLP][Quincyatt][BETA] - AT&T Samsung Galaxy Note I717

[ROM][Unofficial_SlimLP][Quincyatt][BETA] - AT&T Samsung Galaxy Note I717

What works?
RIL
MMS
Camera
Video Recording and Playback
What doesn't work?
1080P video recording
flashlight
you tell me?
USE_ONLY_THIS_UNOFFICIAL_TWRP!!!!!
TWRP 2.8.3.0

I tried the 0221 build and had the wake issues. I'm gonna try the 0342 build and see if that does it! I've been experimenting building kernals for the S3 and XT912 to learn! I'm gonna start working on the I717 tonight and see if I can help everyone out! And thanks again for all of the hard work gimmeitorilltell!
Sent from my DROID SPYDER using XDA Premium 4 mobile app

SgtTeabag said:
I tried the 0221 build and had the wake issues. I'm gonna try the 0342 build and see if that does it! I've been experimenting building kernals for the S3 and XT912 to learn! I'm gonna start working on the I717 tonight and see if I can help everyone out! And thanks again for all of the hard work gimmeitorilltell!
Sent from my DROID SPYDER using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, the 342 seems to work, but also has wake issues after a while. And looking forward to testing your Kernals :good:

Will try NOW and use it from tomorrow daily driver to test from MIUI!
[ Updated! ]
1. Updated to TWRP 2.8.1.0 recovery.
2. Not sure for i717 => 'UCMC1 radio"
3. Tried Both builds
Slim-quincyatt-5.0.2.alpha.0.91-UNOFFICIAL-20150202-0342.zip
Slim-quincyatt-5.0.2.alpha.0.91-UNOFFICIAL-20150202-0221.zip
=> Keep rebooting as soon as it boots to home screen after you click "power" button to turn off and try to wake up back.
Still it was enough excitement feeling to see the LP home screen on i717!
Hope we could see working build soon.
P.S. Can any developer could also change PIT(partition modification original 2GB limit) specially for new build?

pointdooly said:
Will try NOW and use it from tomorrow daily driver to test from MIUI!
[ Updated! ]
1. Updated to TWRP 2.8.1.0 recovery.
2. Not sure for i717 => 'UCMC1 radio"
3. Tried Both builds
Slim-quincyatt-5.0.2.alpha.0.91-UNOFFICIAL-20150202-0342.zip
Slim-quincyatt-5.0.2.alpha.0.91-UNOFFICIAL-20150202-0221.zip
=> Keep rebooting as soon as it boots to home screen after you click "power" button to turn off and try to wake up back.
Still it was enough excitement feeling to see the LP home screen on i717!
Hope we could see working build soon.
P.S. Can any developer could also change PIT(partition modification original 2GB limit) specially for new build?
Click to expand...
Click to collapse
After Exact Step of flashing, I could load 0342 firmware without reboot issues.
1. Factory Data reset
2. Wipe Cache/Dalvik
3. Format System/Data
4. Install SlimFast zip from Sdcard
5. Wipe Cache/Dalvik
6.Reboot device
7.boot back into recovery
8.Wipe Cache/Dalvik
9. Flash gapps
10.Wipe Cache/Dalvik
11. Flash SuperSU
12.Wipe Cache/Dalvik
13. Reboot
Wow! It is really working LP except except internal & external sd cards which is important.
=> Can't use camera and video camera at all since it can't save to internal SD.
When you open camera app, you will receive this errir "Camera app says "Insert an SD card before using the camera"".

everything seems to work fine but no audio

kukke5 said:
everything seems to work fine but no audio
Click to expand...
Click to collapse
pointdooly said:
After Exact Step of flashing, I could load 0342 firmware without reboot issues.
1. Factory Data reset
2. Wipe Cache/Dalvik
3. Format System/Data
4. Install SlimFast zip from Sdcard
5. Wipe Cache/Dalvik
6.Reboot device
7.boot back into recovery
8.Wipe Cache/Dalvik
9. Flash gapps
10.Wipe Cache/Dalvik
11. Flash SuperSU
12.Wipe Cache/Dalvik
13. Reboot
Wow! It is really working LP except except internal & external sd cards which is important.
=> Can't use camera and video camera at all since it can't save to internal SD.
When you open camera app, you will receive this errir "Camera app says "Insert an SD card before using the camera"".
Click to expand...
Click to collapse
All the issues we're having with this lovely rom, @gimmeitorilltell is trying to fix. We have to wait for the next update. Hopefully @SgtTeabag has a Kernel for us to fix some of the issues

New build in OP! Wake lock issues squashed! Still no audio! Videos play except 1080, camera works... Slim-quincyatt-5.0.2.alpha.0.91-UNOFFICIAL-20150202-2324.zip

New BUILD with Audio
OP has it with audio, video recording & playback!

following your progress with great interest! Thanks again.

installation went without a hitch.
i used cwm 6.0.4.3
i wasn't able to setup an apn.
the screen said that the apn settings are not available for this user.
tried to add them anyway but wouldn't save.

gimmeitorilltell said:
OP has it with audio, video recording & playback!
Click to expand...
Click to collapse
Baseband isnt working
---------- Post added at 11:35 AM ---------- Previous post was at 11:32 AM ----------
beenkenobee said:
installation went without a hitch.
i used cwm 6.0.4.3
i wasn't able to setup an apn.
the screen said that the apn settings are not available for this user.
tried to add them anyway but wouldn't save.
Click to expand...
Click to collapse
Is your baseband working ?

TeamAndroid14 said:
Baseband isnt working
---------- Post added at 11:35 AM ---------- Previous post was at 11:32 AM ----------
Is your baseband working ?
Click to expand...
Click to collapse
nope

TeamAndroid14 said:
Baseband isnt working
---------- Post added at 11:35 AM ---------- Previous post was at 11:32 AM ----------
Is your baseband working ?
Click to expand...
Click to collapse
beenkenobee said:
nope
Click to expand...
Click to collapse
Thanks for the heads up. I do not have an active sim card for my device so I never thought to checkout the baseband. I'll see what I can find.

My device is on UCMD3 version.

gimmeitorilltell said:
Thanks for the heads up. I do not have an active sim card for my device so I never thought to checkout the baseband. I'll see what I can find.
Click to expand...
Click to collapse
@gimmeitorilltell , Thanks brother, I think the audio isnt working still, im not sure if its my phone.

gimmeitorilltell said:
Thanks for the heads up. I do not have an active sim card for my device so I never thought to checkout the baseband. I'll see what I can find.
Click to expand...
Click to collapse
Don't know if this helps, but no audio or baseband on Validus or Broken either.
Sent from my SM-T310 using XDA Premium 4 mobile app

TeamAndroid14 said:
@gimmeitorilltell , Thanks brother, I think the audio isnt working still, im not sure if its my phone.
Click to expand...
Click to collapse
dparrothead1 said:
Don't know if this helps, but no audio or baseband on Validus or Broken either.
Sent from my SM-T310 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have audio on my device, can you all confirm whether you do or don't?

gimmeitorilltell said:
I have audio on my device, can you all confirm whether you do or don't?
Click to expand...
Click to collapse
I am on the 342 build...it has no audio of any kind.
Sent from my Nexus 6 using XDA Premium 4 mobile app

Related

[ROM][GT-I9190][Official][4.4.4] CyanogenMod 11.0 for S4 Mini 3G (EOL)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING! This ROM is for the GT-I9190 variant only!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Q/A thread:
http://forum.xda-developers.com/showthread.php?t=2558702
Please use the above unless you have something development-related to contribute here. Thank you.
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Screenshots:
View attachment 2439447 View attachment 2439448 View attachment 2439449
CM-11.0 Install Guide
Note: CM for Galaxy S4 Mini is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
Download CM-11.0 and gapps-jb zips and put in /sdcard
Nightly: http://get.cm/?device=serrano3gxx&type=nightly
UPGRADE REQUIRED
gapps version 20140606
MD5SUM: d840e20fba6f0e2b85d1aebe493a88fa
Please verify the md5sum to be sure you got the right one.
Before you install CM-11.0: Preparation (First three are optional. If you want to start fresh, these can be skipped)
Install AppBak from Market, run it and save a list of all your apps.
Install SMS Backup and Restore from Market, run it and backup your SMS history.
Install Call Logs Backup and Restore from Market, run it and backup your call log history.
Boot into ClockworkMod recovery. Make a full backup. You will need this backup later if you decide to go back to your previous ROM and data.
WARNING: Many apps will Force Close crash if you restore data from a previous ROM.
Install
Use ClockworkMod Recovery.
Warning: Only use this recovery to flash CM-11.0. Otherwise, you risk bricking your phone!2
Wipe data and cache.
Flash cm-11*.zip.
Flash gapps*.zip. You must flash gapps after every upgrade to CM11.0 since /system is formatted, wiping your previous add-ons.
Reboot phone.
After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.
Warning: Do not restore backup data of system apps!
If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
It seems that restoring backups can also break Calendar sync.
Upgrades
Upgrades from previous versions of CM11.0 are the same process as install, except you do not need to wipe anything. Contrary to popular belief, you do not need to even wipe cache and dalvik-cache when upgrading between CM11.0 versions. You only need to wipe if you are doing a major upgrade, switching to a different ROM entirely, or attempting to fix bugs caused by bad backups or corrupt app data.
Useful Links:
BBQLog changelog
serrano3gxx CyanogenMod wiki
Jira issue tracker
DO NOT REPORT BUGS FOR NIGHTLY BUILDS!
Source repos for serrano3gxx
https://github.com/CyanogenMod/android_device_samsung_serrano3gxx
https://github.com/CyanogenMod/android_device_samsung_serrano-common
https://github.com/CyanogenMod/android_device_samsung_msm8930-common
https://github.com/CyanogenMod/android_kernel_samsung_msm8930-common
https://github.com/TheMuppets/proprietary_vendor_samsung/tree/cm-11.0/serrano3gxx
https://github.com/TheMuppets/proprietary_vendor_samsung/tree/cm-11.0/serrano-common
Other Issues?
Use this for obtaining logs.
For nightlies, bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
Credits:
Epic Touch CM Team for the install instructions
Everyone that donated beers
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!

Can't wait to try it. The new cwm link is still down though.
I don't even know what's new or improved about kitkat. Just a sucker for version numbers.

Does it support 4G?
Sent from my GT-I9195 using XDA Premium 4 mobile app

Kit kat is working, yay!!! Thank you, thank you, thank you!
For the first nightly it's actually super stable, haven't had a single reboot since last night when i installed it.
Only thing missing is the trebuchet options, like removing the search bar, and choosing which screen is your default home screen, but im sure thats all pretty much in development.
Performance is also excellent, 20900 antutu. Feels as buttery smooth as ever.
Sent from my GT-I9190 using xda app-developers app
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
imputazz said:
Does it support 4G?
Sent from my GT-I9195 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Check out the 9195 cm11 thread, you are in the 3g thread
Sent from my GT-I9190 using xda app-developers app

BushTechy said:
Only thing missing is the trebuchet options, like removing the search bar, and choosing which screen is your default home screen, but im sure thats all pretty much in development.
Click to expand...
Click to collapse
Actually, if you press menu button and select settings, you can change this there.

arco68 said:
Actually, if you press menu button and select settings, you can change this there.
Click to expand...
Click to collapse
I have pretty much scrutinized all the settings, i don't see it.
When u press menu and settings in the home screen the menu below appears, cant remove the search bar there, nor choose which tile is your default home screen.
Sent from my GT-I9190 using xda app-developers app
Edit: cant seem to upload the screenshot, but its a google menu, with only google app and search settings, but not what i have mentioned

Sent from my GT-I9190 using xda app-developers app

BushTechy said:
I have pretty much scrutinized all the settings, i don't see it.
When u press menu and settings in the home screen the menu below appears, cant remove the search bar there, nor choose which tile is your default home screen.
Sent from my GT-I9190 using xda app-developers app
Click to expand...
Click to collapse
You need to be using the launcher3 for those settings, the other launcher is googlish.

@arco68
I have just reflashed the rom and gapps, "launcher3" doesn't appear to be on the gti9190s cm11. In the App manager under all apps tab there is only "launcher", can anybody else with 9190 confirm this?
Sent from my GT-I9190 using xda app-developers app

So i managed to get the launcher going with some help
Found a minor bug, if you remove an app from your home screen, the search bar turns into the word "remove" in red where you can drop the app, but if you disable the search bar, then that word in red is also removed, and you cannot get apps of your homescreen until you have re_enabled the searchbar
Sent from my GT-I9190 using xda app-developers app

First impressions on 4.4.1
It's marvellous so far. Less random reboots and improved battery life. Minor bugs such as camera freezes. But not so important and will definitely be handled by this awesome team (@arco68 & the company).

will this rom support dual sim variant???
or any way to use it on my dual sim variant??

pankaj_GB said:
will this rom support dual sim variant???
or any way to use it on my dual sim variant??
Click to expand...
Click to collapse
Cyanogen mod dont support any dual sim phone...

Gapps package in first post updated.

Downloadinggggggg.............

New gapps overwrites launcher3, had to restore mine from back-up, can anybody confirm this?
Sent from my GT-I9190 using xda app-developers app

there is some weird pixellation in video mode in the camera ,
i hope arco is aware of that

step-2 said:
there is some weird pixellation in video mode in the camera ,
i hope arco is aware of that
Click to expand...
Click to collapse
Same here. But the resulting recorded video is as it should be, non-pixelated.

today swithed cm11. smooth, especially after switching art. but cm is not what it had been 1,5 years ago. a lot of own approaches and some unnecessary apps one should get rid off.
would very appreciate if someone would provide slimkat nightlies... black apps, slim, additional settings as touch a sensistivity are great features normal cm is missing.
nevertheless most is working fine, just some issues with flash and torch at this development stage. all else seems to be quite good. - thanks for sharing!
Sent from my GT-I9195 using xda app-developers app

{[REQUEST] Interface options
Hi guys,
can i first say, great work. And if i knew how to do this myself i would.
Just wondering if you could put in an option to hide the clock in the top right corner... like the option in the interface to hide the battery icon.
Also need an option in the camera to use external SD card for main storage. Have tried 3 other camera apps from the play store but none have this option either.
Keep up the fantastic work.:good:

[ROM][KitKat][4.4.2][Unofficial]BeanStalk Build 4.4.285 NEW_FORMAT- 4.4.2 [Jewel]

Reserved

Reserved

First... and you've been pretty busy lately GoblinZ ... get some sleep. :laugh:

Awesome... Downloading now Thanks!!!!

This is very nice.
Thanks a ton!

Holy shiiiiiii! Beanstalk is back! You rock man!
Dirty Dirty EVO

Figured out xposed location.... but can't get DPI to change.
Also, for Pie control, not seeing how to change background on lock screen.

Nice work man thank you for bring us such a lovely Rom. I hope you have as much fun as I did building and maintaining this Rom. :thumbup:
Sent from my EVO using Tapatalk

mcwups1 said:
Figured out xposed location.... but can't get DPI to change.
Also, for Pie control, not seeing how to change background on lock screen.
Click to expand...
Click to collapse
So I pulled the feature list directly from the lead developer's thread with the assumption that he had kept up the feature list...appears he doesnt keep his thread up.
http://forum.xda-developers.com/showthread.php?t=2091900
So I will edit out all the features from the OP and instead just put a link to the kitkat changelog.

Copy that, but I don't see why DPI settings aren't working. Xposed is there, as well as app settings, so it should work.
I installed and enabled, then rebooted.
I'll keep trying.

mcwups1 said:
Copy that, but I don't see why DPI settings aren't working. Xposed is there, as well as app settings, so it should work.
I installed and enabled, then rebooted.
I'll keep trying.
Click to expand...
Click to collapse
open xposed back up on the top where it says "Framework" change to "Modules" put a check in the app settings module...reboot

GoblinZ said:
open xposed back up on the top where it says "Framework" change to "Modules" put a check in the app settings module...reboot
Click to expand...
Click to collapse
I did that. I've used Xposed in almost every ROM I've installed. I'm familiar with it.
Attached pictures, and I've granted SU permissions and rebooted twice.

mcwups1 said:
I did that. I've used Xposed in almost every ROM I've installed. I'm familiar with it.
Attached pictures, and I've granted SU permissions and rebooted twice.
Click to expand...
Click to collapse
I did not test dpi, I set an app to "landscape only" and that worked after enabling in the modules.

Message app is awesome!
Sent from my EVO using Tapatalk

Anyone get DPI settings to work?

So right after I say message app is awesome it's force closing when I attach and try to send a picture. Any ideas
Sent from my EVO using Tapatalk

thewind730 said:
So right after I say message app is awesome it's force closing when I attach and try to send a picture. Any ideas
Sent from my EVO using Tapatalk
Click to expand...
Click to collapse
I flashed the Full Modular GAPPS from the 0-day PA so my messaging app didnt look any different. I was able to attach a picture and send without issue.
Edit: so, I wiped flashed Just this rom and the PA Gapps, and sure enough force close...google is clearly forcing us to use hangouts...but in all seriousness it seems to be affecting CM nightly as well
http://forum.xda-developers.com/showpost.php?p=50141180&postcount=1184
So, I will recompile and post to OP as soon as CM has the code cleaned up with a fresh build. Sorry for the trouble.

Ok cool cause I was having the same issues with decks irc build with the messaging app ill try this out once you get it fixed
Sent from my EVO using XDA Premium 4 mobile app

GoblinZ said:
I flashed the Full Modular GAPPS from the 0-day PA so my messaging app didnt look any different. I was able to attach a picture and send without issue.
Edit: so, I wiped flashed Just this rom and the PA Gapps, and sure enough force close...google is clearly forcing us to use hangouts...but in all seriousness it seems to be affecting CM nightly as well
http://forum.xda-developers.com/showpost.php?p=50141180&postcount=1184
So, I will recompile and post to OP as soon as CM has the code cleaned up with a fresh build. Sorry for the trouble.
Click to expand...
Click to collapse
Thanks man! For looking into this and bringing these builds back your time is greatly appreciated
Sent from my EVO using Tapatalk

[ROM] [4.4.4] [220MB] [Sept19] CarbonRom KitKat

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonRom KitKat for Nexus One!
Fits on 220mb HBOOT!
7/15 Update:
4.9 toolchain
Heads Up notifications (as opposed to Hover)
updates to random other stuff as well
From Carbon themselves:
CarbonRom is an aftermarket firmware based on the Android Open Source Project.
We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonDev GitHub.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, AOKP, and anyone else we may have borrowed commits from that hasn’t been mentioned here. If you feel you have been unfairly left out, please – let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Features
https://carbonrom.org/features/ (Pretty much everything.)
Nexus One specific:
Trackball wake toggle (Settings -> CarbonFibers -> Buttons)
Download here.
Read instructions before installing.
Installation:
If you don't know what hboot is, please read this first: http://forum.xda-developers.com/showthread.php?t=1270589
HBOOT /system size 220
I recommend cache at 10mb
Wipe data.
This must be done before flashing zips if you want Mounts2SD to work properly, as Mounts2SD's zip writes to /data.
Install ROM.
(Optional but highly recommended) Install ext script such as Mounts2SD download here - same zip as my CM11)
You will need an ext partition on your SD card.
You can customize the settings after installation with the Mounts2SD app. You may want to move application libraries, for example.
TWRP also seems to not like Mounts2SD. CWM and 4EXT seem to work fine for me.
Known Bugs:
Don't even try screen recording
Evervolv base
HWA video recording/playback not working
no MMS
wifi tethering not happy - only works on no password
Keyboard
If system language is set away from English because of SIM card, keyboard will crash. Set up phone in English.
I myself am having some trouble downloading large applications, not sure where this problem is from
Big thanks to:
Evervolv - device/kernel/other repos. They're the guys that keep the old Nexus One going 4 years after it came out.
CarbonRom and all those who maintain the sources they use (Slim, PA, AOKP)
WoH, csytracy who helped me earlier on
dk_zero-cool, for mounts2sd.
spezi77, for maintaining some handy sources with qsd8k mods
Some of my sources are available on github: https://github.com/parkedraccoon/android_device_htc_passion/tree/kitkat-carbon, https://github.com/parkedraccoon/android_packages_apps_CarbonFibers

Carbon is just about as slim as CM, but does not include a music app. That's how I left the boot animation and some audio files in there.
Old downloads:
https://drive.google.com/folderview?id=0B6H3m9ss3c8scnRKMGRPLS1QaW8&usp=sharing
Old Mounts2SD:
Some have reported problems with the current Mounts2SD script. Attached to this post is an old installer I used to use back in the 4.1 days that seems to work on sd cards that the new Mounts2SD does not. It is an Aroma installer - I recommend default settings except check dalvik along with apps.
Why is this not the main zip? Because it takes more effort and the current Mounts2SD script seems to work fine for most.
Looking for ART? I have not been able to make ART boot on Carbon, even when using the exact same method as with CM. I may continue playing around but I doubt I'll find anything.

Thanks, I try it now!
---------- Post added at 11:18 AM ---------- Previous post was at 10:42 AM ----------
Riddle78 said:
Thanks, I try it now!
Click to expand...
Click to collapse
It should not be, the same problem of CM11. After following the procedure, the system remains locked on the opening!

Riddle78 said:
Thanks, I try it now!
---------- Post added at 11:18 AM ---------- Previous post was at 10:42 AM ----------
It should not be, the same problem of CM11. After following the procedure, the system remains locked on the opening!
Click to expand...
Click to collapse
Check the second post. I added an older M2SD script that is more of a hassle to set up, but seems to fix problems I had on my older sd cards.

parkedraccoon said:
Check the second post. I added an older M2SD script that is more of a hassle to set up, but seems to fix problems I had on my older sd cards.
Click to expand...
Click to collapse
Ok, I try and let you know!
For the keyboard I can directly install the apk?

Nice
Thanks for let nexus one live
Would ask is there wifi region setting

http://forum.xda-developers.com/showthread.php?p=50152996
pretty look! nice work, thanks you!!!

So, it works very well apart from the usual problems. Try not to abandon it because it is really wonderful!

Is the system font does not contain Asian Languages?
I could not see any Chinese/Japanese characters by using this ROM

downloading... will install soon and will provided the feedback later. thanks for the rom!
---------- Post added at 03:46 AM ---------- Previous post was at 03:43 AM ----------
i think the zip ( m2sd Aroma) should be on the cm thread rom too. just to mention.:good:

Lockscreen setting Force Close.
When i jump to Lockscreen > Notification in Carbon Fibers, its Force Close. I try to disable widget on lockscreen to avoid camera widget.

There is a problem on the volume of notifications! Although the volume is set to maximum, the notification sms is very quiet!

carbon setting FC so i cant disable poket mode

Hi, great !!!!
I also have the audio notification problem !! Any Idea to solve it??

rs1turbo said:
Hi, great !!!!
I also have the audio notification problem !! Any Idea to solve it??
Click to expand...
Click to collapse
Riddle78 said:
There is a problem on the volume of notifications! Although the volume is set to maximum, the notification sms is very quiet!
Click to expand...
Click to collapse
I'll look into it, but I'll be busy this weekend.
Akram-aat said:
carbon setting FC so i cant disable poket mode
Click to expand...
Click to collapse
It's an issue in Carbon itself, actually. I'll try and make a workaround if I have time this weekend (again, I'll be busy)

It's beautiful.
The Carbon ROM is the ROM that has more style, so far, to Nexus One But most important is fluency. So I want to ask:
Is it as smooth as CM 11?
Anyone who can answer estrablecer diferecencias Thanks beforehand.

Theericgames said:
The Carbon ROM is the ROM that has more style, so far, to Nexus One But most important is fluency. So I want to ask:
Is it as smooth as CM 11?
Anyone who can answer estrablecer diferecencias Thanks beforehand.
Click to expand...
Click to collapse
In test carbon for hour and I thing cm more stable cuz wifi region my phone freeze and become unstable

New update posted! Lots of new things. I love removing things from the Known Bugs list!
ROM itself:
Gesture typing fixed!
The ROM is not so tightly bound to 220MB, so it will take less time to install. Recommended hboot size is still 220.
Default ringtone not existing fixed. (This fixes the 'soft,' actually completely silent, notification sound, at least in some cases.)
I have fixed the error in CarbonFibers on Notifications menu where it crashes.
I may push my fix upstream to Carbon but for devices that do not require slimming, it is not needed.
Carbon:
Force high gfx mode (transparent status bar/navbar) is now officially part of Carbon. Performance -> Force high-end graphics. Surprisingly enough our very own drewis/texasice's commit is used!
Slim's PIE added
Lots of small tweaks, etc.
Check first post for update link.

Cool
Thanks for the new arrangements, and say why do not you fix some.
For the mistake of downloading large apps, you can use this page to download applications from the PC and then transfer them to your smartphone:
APK Downloader WEB
Well, if I find a solution for an error, or find a new error, the report you.

After Installing Mount2SD Skype Restart Mobile ... Plz Fix ... Grt RoM

[18/12]{CM12-Unofficial} T0lte-Everything Almost Work+Incall

First, all we are say "thank so much" to @sbrissen shared this build for t0lteXX. and i'm only shared it again for every one.
Original thread by him : http://forum.xda-developers.com/note-2-verizon/orig-development/rom-cyanogenmod-12-0-t2967940
New Build from @sbrissen :
Rom (18/12) : https://www.androidfilehost.com/?fid=95857557620393640
Changed : Fixes keyboard problem, camera issue, and wifi causing soft reboots
Gapps : https://www.androidfilehost.com/?fid=95832962473400228
A>.How To install :
use recovery philz_touch 6.48.4 or TWRP 2.8.1.0 for t0lte
1.full wipe data/factory reset, format system, wipe davilk cache.
2.flash rom + gapps
3.wipe davilk cache/data cache
reboot
B>.Work/Not work?
1.Data and service, 3G/LTE work too fine.
2.Camera work with mode front, please use camera google from CHplay (Flash SHIFT-CM12, camera work fine)
3.Video clip work full and fine, too play with Sound and picture.
4.Call Out/receive and sms/mms
5.Music.
6.sensor promixity in call need fix by flash this file (if it have issues) :
https://mega.co.nz/#!1xkSxTDJ!o8DQkNT6UvjNoxfgoxjNq2UnZz_6bO3ivYwMmvRv7dc
7.GPS, still not yet know work?maybe work
8.NFC not work.
9.Volume sound on call very low (gently press button volume down=>sound volume will normal)
and any more maybe work, if you find any issues, please contact or report @sbrissen, to him fix it.
C>.How To Enable NavBar Button Show On Screen With Rom CM12 :
Flash it with recovery : http://goo.gl/IoELzQ
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
More screenshot see here : https://plus.google.com/u/0/communities/111794388121646986594

Awesome I am going to flash this now! Thanks for the updater-script!

link to rom
Bad gateway , can you update the link

:good:Good works Man:good:

Thanks for ROM. Can you please explain how to flash file updater-script? I see two files now and not sure which one to flash and how. I have AT&T Note 2 (t0lteatt)
Update: Bootloop at Cyanogenmod icon. Not booting to device.
mr.nth.na.vn said:
First, thank to @sbrissen shared this build. and I just edited and guided a little wave to the mobile data network for every one
Original thread for him : http://forum.xda-developers.com/note-2-verizon/orig-development/rom-cyanogenmod-12-0-t2967940
Link Rom : https://www.androidfilehost.com/?fid=95832962473400226
you need replace/instead file updater-script by download file attachments below=> so, you can flash it.
Gapps : https://www.androidfilehost.com/?fid=95832962473400228
How To install :
A>use recovery philz_touch 6.48.4 or TWRP 2.8.1.0 for t0lte
1.flash rom + gapps
2.wipe davilk cache/data cache
reboot
first time, skip anyway... all setup wizard, goto Language & Input/select Curent keyboard and check Hardware to show keyboard.
Goto settings/Developer options :
Find and check select all five options : Aggressive Wi-Fi to cellular handover and Enable Wi-Fi Verbose Logging, Wireless display certification and Always allow Wi-Fi Roam Scans.
next is turn on wifi and goto Wireless & networks/... More/Cellular networks/turn on Data roaming and select options GSM/WCDMA/LTE in Preferred network type => Servicer Mobile Data Network show and work fine.
B>Work?
1.Data and service, 3G work fine
2.Camera work with mode front, please use camera google from CHplay.
3.Video clip work full and fine, too play with Sound and picture.
4.Call and sms
5.Music....
and any more, if you find any issues, please contact or report @sbrissen, to him fix it.
More screenshot see here : https://plus.google.com/u/0/communities/111794388121646986594
Click to expand...
Click to collapse

thershope said:
Thanks for ROM. Can you please explain how to flash file updater-script? I see two files now and not sure which one to flash and how. I have AT&T Note 2 (t0lteatt)
Update: Bootloop at Cyanogenmod icon. Not booting to device.
Click to expand...
Click to collapse
Nope, note att work fine, i'm sure. you need replace this file name : updater-script-t0lteXX-l900.rar
patience waiting it boot on up ok................... see screenshot, hey mate

I did wait for more than 20 mins and the device did not boot. I will try again from the beginning. Just to confirm, how to flash the .tar files? Same as .zip in CWM ?
mr.nth.na.vn said:
Nope, note att work fine, i'm sure. you need replace this file name : updater-script-t0lteXX-l900.rar
patience waiting it boot on up ok................... see screenshot, hey mate
Click to expand...
Click to collapse

thershope said:
I did wait for more than 20 mins and the device did not boot. I will try again from the beginning. Just to confirm, how to flash the .tar files? Same as .zip in CWM ?
Click to expand...
Click to collapse
nope, you need make step :
use recovery philz_touch 6.48.4 or TWRP 2.8.1.0 for t0lte
1.full wipe data/factory reset, format system, wipe davilk cache.
2.flash rom + gapps
3.wipe davilk cache/data cache
reboot

Could you explain me step by step how I have to do to replace the updater-script to flash the ROM?

Binary_File said:
Could you explain me step by step how I have to do to replace the updater-script to flash the ROM?
Click to expand...
Click to collapse
Open rom with 7zip and replace updater with modified one then exit 7zip. Now copy rom to device and flash.
Sent from my SPH-L900 using XDA Premium 4 mobile app

So this rom will work fine on t0lte international N7105? Just want to make sure before I flash it. Thanks.
Edit: Nevermind, didn't look at screenshots. Haha.

Razorbeast19 said:
So this rom will work fine on t0lte international N7105? Just want to make sure before I flash it. Thanks.
Edit: Nevermind, didn't look at screenshots. Haha.
Click to expand...
Click to collapse
Yes, I did just flash this on my n7105 and it works. Work good even. Remember to wipe dalvik and cache after install but before reboot.

mangethegamer said:
Yes, I did just flash this on my n7105 and it works. Work good even. Remember to wipe dalvik and cache after install but before reboot.
Click to expand...
Click to collapse
Great Rom!
Works: Call, SMS, data, front camera, video/sound/music, wifi + wifi AP.
Doesn't work:
back camera.
(edit: After flashing Shift CM12 kernel, camera works! But shift cm12 kernel not as smooth as the default kernel. Also baseband may have problem again.)
Keep the good work!
-----------------------------------
I changed Prefered network type to "GSM/WCDMA/LTE preferred" (under Cellular network setttings), so phone call seems working now.

wilson3q said:
Great Rom!
Works: Call, SMS, data, front camera, sound/music, wifi + wifi AP.
Doesn't work:
Video playback, back camera.
Keep the good work!
-----------------------------------
I changed Prefered network type to "GSM/WCDMA/LTE preferred" (under Cellular network setttings), so phone call seems working now.
Click to expand...
Click to collapse
back camera worked for me and so did video playback

winxuser said:
back camera worked for me and so did video playback
Click to expand...
Click to collapse
After I flashed Shift CM12 kernel, back camera works...
Videos captured by camera can play well...

kernel
wilson3q said:
After I flashed Shift CM12 kernel, back camera works...
Videos captured by camera can play well...
Click to expand...
Click to collapse
can you send me a link to the kernel

after installing a few apps, its become pretty unresponsive and wifi stopped working?? not sure if its just me tho
---------- Post added at 02:46 PM ---------- Previous post was at 02:16 PM ----------
calls don't work for me,, sms are ok

spinekiller1 said:
can you send me a link to the kernel
Click to expand...
Click to collapse
URL by @rogersb11:
https://www.dropbox.com/s/97gwv1ticia4bk7/Shift-CM12.zip?dl=0
But after flashing shift kernel, back camera works, but other things will break, e.g. baseband. Also the rom become not so responsive and stable.
Better wait for the true CM12 build from t0lte (not this device i605)...
---------- Post added at 06:04 AM ---------- Previous post was at 06:00 AM ----------
winxuser said:
after installing a few apps, its become pretty unresponsive and wifi stopped working?? not sure if its just me tho
---------- Post added at 02:46 PM ---------- Previous post was at 02:16 PM ----------
calls don't work for me,, sms are ok
Click to expand...
Click to collapse
Mine still quite responsive after installing 10+ apps...I am using the default kernel with the rom. Not shift cm12 kernel.
Change your prefered network type to the correct one for your carrier..and call will work.

wilson3q said:
URL by @rogersb11:
https://www.dropbox.com/s/97gwv1ticia4bk7/Shift-CM12.zip?dl=0
But after flashing shift kernel, back camera works, but other things will break, e.g. baseband. Also the rom become not so responsive and stable.
Better wait for the true CM12 build from t0lte (not this device i605)...
---------- Post added at 06:04 AM ---------- Previous post was at 06:00 AM ----------
Mine still quite responsive after installing 10+ apps...I am using the default kernel with the rom. Not shift cm12 kernel.
Change your prefered network type to the correct one for your carrier..and call will work.
Click to expand...
Click to collapse
ahaha woops yeah I forgot to change network type,,, but after a couple minutes on a call the line goes all static and I cant hear anything
---------- Post added at 03:22 PM ---------- Previous post was at 03:10 PM ----------
Seems like the preferred network doesn't save once it reboots it changes again
Sent from my SCH-I605 using XDA Free mobile app

hi
i follow your thread and still having the same issue. i can send an receive text messages. i can call out but i cannot receive call. the person calling me gets the ring and then to my voicemail which i receive. i replaced the script as indicated. i check the status of the cellular network state and it says Disconnected.. The model still shows as i605. i have the i317m

[ROM][LP] [5.1.1-r4][Unofficial] PACMAN rom [2015-07-04]

Hello everybody,
I've just compiled PACMAN-ROM for my new Z3C. Current version is PAC-LP MR1 Beta2.
Device trees are CyanogenMod's so probably all device specific CM-bugs will be there too.
The boot.img inside the zip contains CM 12.1 kernel and "Cyanogen Recovery" (no backup right now!).
For alternative recoveries/kernels scroll down to "TESTED - WORKING"...
If the rom is stable for daily use (as I hope) I'm gonna build newer version periodically (depending on PAC & CM updates).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDITS:
2015-07-09:
i've been trying to get rid of the latest problems, i.e. crashing android browser, opera browser, voice recorder and google apps (if installed). tried 4 or 5 builds in the meantime. i've got no idea why and not the skills to search in log files.
if anyone likes to test and find out, i uploaded version from july 4th.
2015-06-25:
New Version - updated CM & PAC sources. Some new PAC features there!
Version is PAC-LP MR1 Beta2 now. Unstable with crashes.
2015-05-24:
New Version - updated CM & PAC sources
2015-05-12/13:
New Version - updated CM & PAC sources
Volume bug on in-call got solved today!
2015-05-01:
I've uploaded an EXTRA boot.img including XZDualRecovery provided by NUT's!
http://nut.xperia-files.com/?ql=34070511dc3ee6809f305c66a5fa122fcbf9dcff
Flash it before or after installing the PACROM zip. It contains the zip's
kernel + DualRecovery. Installing the rom zip will overwrite recovery again
so for backups it might be necessary
to flash it always before installing a new zip, e.g.
2015-04-29:
- Screenshots
- Yes! I got it running. After some hours of use, it seems really smooth & snappy. No reboots.
- How I installed everything: Root on Kitkat stock rom, backup TA-partition, install
Dual-recovery, update to Lollipop rooted, make nandroid backup of hole system,
unlock bootloader, flash PACMAN boot.img, wipe data/caches,
flash PACMAN zip + GAPPS ... quite some hours of work.
TESTED - WORKING:
- 2G, 3G, 4G
- wifi, wifi hotspot
- bluetooth audio
- nfc
- usb otg
- GAPPS (mentioned below)
- titanium backup
- PAC customizations (not all tested)
- video playback on youtube, vlc, mxplayer
- camera & video recording
- GPS using Google Maps
- headphone sound
- XZDR recovery (version 2.8.15 not working): http://nut.xperia-files.com/
- FOTA TWRP recovery (persistent in fota kernel partition): http://forum.xda-developers.com/z3-...12-nightly-t3010550/post58854063#post58854063
- M5 kernel (CM12.1 based): http://forum.xda-developers.com/z3-compact/orig-development/kernel-m5-kernel-t3115498
BUGS:
- phone call volume loud / not reducable in dialer app. (skype & whatsapp calls are alright) solved on 150512
- If alarm clock is set active -> reboot leads to normal shutdown -> deactivate alarm for that case
- photo: Little fish-eye effect on short distance (it's not that little actually)
NOT TESTED YET:
- encryption
Installation notes: Unlocked bootloader required
- flash boot.img (rashr on phone/ fastboot on pc), then boot into custom recovery
- wipe cache, wipe art/dalvik cache
- when coming from a different rom wipe data (factory reset)
- when changing between different gapps packages format system may be useful
- flash rom zip
- if needed flash gapps zip
Download PACMAN: https://www.androidfilehost.com/?w=files&flid=30581
Download GAPPS: http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
Device trees used: https://github.com/filou76/manifest/blob/master/z3c.xml
Credits!!!:
PACMAN project for their great and cool work!! www.pac-rom.com/#Home
All CM developers for giving a solid custom rom ground!!
All Z3C developers who are trying hard to make this great phone ready for daily use, especially those couple of root/bootloader/recovery hackers!! bilbao1 for the great howto root/backup etc! [NUT]'s for this very cool online kernel builder!
Google, of course

Screen shots please...

I guess its a cm based. So we need unlocked bl right?

shakkirk said:
Screen shots please...
Click to expand...
Click to collapse
It's the same as any Lollipop based PAC ROM, so just search the web for pics.
basti2909 said:
I guess its a cm based. So we need unlocked bl right?
Click to expand...
Click to collapse
Yes.

at least a custom rom for z3c. thanks man for your efforts...

basti2909 said:
I guess its a cm based. So we need unlocked bl right?
Click to expand...
Click to collapse
I think PAC is AOSP & CM based. Custom kernel. Unlocked bootloader, yes.

drorcun said:
at least a custom rom for z3c. thanks man for your efforts...
Click to expand...
Click to collapse
Happy to build actually it's not that difficult with CM device support. Probably I'll build some monthly versions or so...

drorcun said:
at least a custom rom for z3c. thanks man for your efforts...
Click to expand...
Click to collapse
just what i wanted to write. big thanks
hope we can see some more, maybe validus/resurrection remix? (maybe i should get me better informed to do it myself^^)

becks0r said:
just what i wanted to write. big thanks
hope we can see some more, maybe validus/resurrection remix? (maybe i should get me better informed to do it myself^^)
Click to expand...
Click to collapse
:good: In case of resurrection remix you only need to add/edit 1 file (local_manifest) to be able to compile a working rom. All the rest it just setting up ubuntu, init/sync repo an start building ...

Hmm it could be a reason to unlock bootloader.,)

XZDualRecovery
I've uploaded an EXTRA boot.img including XZDualRecovery provided by NUT's! http://nut.xperia-files.com/?ql=34070511dc3ee6809f305c66a5fa122fcbf9dcff
Just flash it before or after installing the PACROM zip. It contains the original kernel + DualRecovery. CyanogenRecovery really sucks, not even a way to make backups. Now we can

does this have a camera fix included, or does that need to be flashed separately? I don't have a backed up TA partition, so I rely on the fix for image processing (like many others on here, I'm sure).
thanks in advance and nice to see the ROM!

beflythis said:
does this have a camera fix included, or does that need to be flashed separately? I don't have a backed up TA partition, so I rely on the fix for image processing (like many others on here, I'm sure).
thanks in advance and nice to see the ROM!
Click to expand...
Click to collapse
there's nothing like this included. as far as i know custom roms/ custom kernels can't handle drm keys from TA partition. not sure about flashable drm replacement, i don't think it will work, but maybe it does
perhaps someone knows more about this sony image processing stuff.
isn't that all software based? if so, i could imagine that a good camera app (FV-5 or something like) can bring the same results.

Great work mate. Been running a few hours with the updated boot.img
Hopefully there is no "memory leak"

beflythis said:
does this have a camera fix included, or does that need to be flashed separately? I don't have a backed up TA partition, so I rely on the fix for image processing (like many others on here, I'm sure).
thanks in advance and nice to see the ROM!
Click to expand...
Click to collapse
That fix is only useful on stock Sony based rom's.

bugs update
(1) i found a small, almost funny bug. couldn't reboot to recovery today because phone always ended with shutdown. i desperately flashed the boot.img again but no change. only after deactivating everything i thought not being active at installation the problem disappeared.
well, it's the active alarm, that i use every morning ...
(2) in call volume issue seem's to be somewhere hidden in android_device_sony_z3c/audio/mixer_paths.xml of the repo. just in case someone likes to search :laugh:

I have noticed a small bug, could be just me though. When rebooting while plugged in to the USB charger it goes as far as the Sony logo then freezes until I unplug it. How would I go about submitting a bug report for it?
Sent from my Xperia Z3C using Tapatalk

mrrflagg said:
I have noticed a small bug, could be just me though. When rebooting while plugged in to the USB charger it goes as far as the Sony logo then freezes until I unplug it. How would I go about submitting a bug report for it?
Sent from my Xperia Z3C using Tapatalk
Click to expand...
Click to collapse
Hi, thank's for that! I've just reproduced what you wrote. On my phone this is also connected to active alarm clock. It's rebooting fine when alarm is off. So, quite the same as my last post.
I have no suggestion about real bug reports, because of 2 reasons: this is an unofficial build, primarily for myself ... but shared. I would stop building if Z3C would get official PAC support. And I've just started building roms 2 months ago. So, I'm not having the skills (yet) for advanced debugging. Right now it's more like being voluntary apprentice :laugh: ... I'm gonna add your input it into 1st post.
For now stability of this rom is mainly dependent on PACROM itself and official CM support.

Im glad you could reproduce the same bug. I think you have done a great job mate. I'm loving this ROM and appreciate your efforts. I'm trying to figure the dev side of things myself, not having much luck yet.
Sent from my Xperia Z3C using Tapatalk

Good job, m8!
Can someone post a picture, taken by camera on this phone with this rom ?
A picture of a door , or a wall, for example. Any picture featuring a rectangular shape with straight lines.
I had a broblem be4 on CM12 @z3c , the camera ( any camera app ) took pictures, distorting proportions, like there was a fisheye filter applied

Better Mobile App

welcome