Once I get it rooted and got recovery installed I should be able to use AOSP roms right? Thanks in advance.
AngryManMLS said:
Once I get it rooted and got recovery installed I should be able to use AOSP roms right? Thanks in advance.
Click to expand...
Click to collapse
Yes, you have to revert out to 10b via kdz method, root and install twrp, then you can install an aosp Rom
That being said, the 2/1 build of cm12 is one of the most stable right now from my experience. Smooth as butter. You can pm me if you need any advice
Sent from my VK810 4G using XDA Free mobile app
Perfect. I'm very excited to have a device that can run AOSP roms once again. I might try a few of the other roms along with CM12 to see which one I like.
I'm also assuming this method will let me use custom kernels too right?
Related
As we move forward with cm10, Is it better to use TWRP or CWM ? Any advantages to either ? Can one go back and forth ?
sailerph said:
As we move forward with cm10, Is it better to use TWRP or CWM ? Any advantages to either ? Can one go back and forth ?
Click to expand...
Click to collapse
I've been bouncing back and forth (CWM 6.x, TWRP 2.1.4 and 2.2.2). Not sure if that's recommended or not, but its been working for me. YMMV though.
sailerph said:
As we move forward with cm10, Is it better to use TWRP or CWM ? Any advantages to either ? Can one go back and forth ?
Click to expand...
Click to collapse
TWRP has been bullet-proof for me since I installed it. No problems flashing CM7, CM9, or CM10 ROMs, nor other ROMs based on those.
I'm am currently using TWRP to flash Linaro CM10 SGT7 Port For Nook Tablet, but when it reboots i get kicked back to TWRP even tho it was successful
Any ideas? I have had no issues with CWM
CWM it not good for flashing CM10...Surely
The cm9 5.1 cwm can flash all roms those you listen can't flash cm7 roms
Sent from my LG Spectrum 4G LTE using xda premium
shawner47 said:
I've been bouncing back and forth (CWM 6.x, TWRP 2.1.4 and 2.2.2). Not sure if that's recommended or not, but its been working for me. YMMV though.
Click to expand...
Click to collapse
Where did you get CWM 6.x? I thought 5.5.x was the latest. Please link if you have it available.
As far as the OP, I have been flashing everything across the board for my NT with CWM 5.5, it has worked fine for all three CM builds.
DavDoc said:
Where did you get CWM 6.x? I thought 5.5.x was the latest. Please link if you have it available.
As far as the OP, I have been flashing everything across the board for my NT with CWM 5.5, it has worked fine for all three CM builds.
Click to expand...
Click to collapse
have a look here mate
http://forum.xda-developers.com/showthread.php?t=1640958
Ya, I haven't checked in on that thread for a couple months.
Sent using a DINC4G
megaghostgamer said:
The cm9 5.1 cwm can flash all roms those you listen can't flash cm7 roms
Sent from my LG Spectrum 4G LTE using xda premium
Click to expand...
Click to collapse
TWRP 2.1.4 can flash CM7 ROMs without any problems. I haven't updated to TWRP 2.2, yet...
Stock touchwiz and all, didn't flash any roms but I am rooted with unlocked bootloader. Any mod I've ever wanted, I was able to do through xposed or just flash some small file. My questions is, are there any benefits to changing roms? If so, what TW rom would you guys suggest?
ThaCh0de's CockNRom v9.2.3.1 with XBrickMyPhoneX kernel seems to do the trick for me
Sent from my SCH-I545 using Tapatalk
loudaccord said:
Stock touchwiz and all, didn't flash any roms but I am rooted with unlocked bootloader. Any mod I've ever wanted, I was able to do through xposed or just flash some small file. My questions is, are there any benefits to changing roms? If so, what TW rom would you guys suggest?
Click to expand...
Click to collapse
Woohoo! Don't loose that MDK bootloader! You're one of the lucky/smart ones that didn't take an OTA update.
Sent from my SCH-I545 using XDA Free mobile app
loudaccord said:
Stock touchwiz and all, didn't flash any roms but I am rooted with unlocked bootloader. Any mod I've ever wanted, I was able to do through xposed or just flash some small file. My questions is, are there any benefits to changing roms? If so, what TW rom would you guys suggest?
Click to expand...
Click to collapse
Install or update TWRP with Goomanager if you're on an old recovery. Just click install openrecoveryscript, that easy.
Stock TW KitKat: http://forum.xda-developers.com/showthread.php?t=2721118
There are lots of improvements in JB and KK, as well as a couple fixable "issues" (e.g. sd card).
You can sell it to me and then I will give you my phone, that would be the best thing for the world.
Definitely gonna keep my MDK bootloader. The funny thing that's making me want to change is the App to SD card feature in the updates.
I'll make the switch from CWM to TWRP and give stock TW KK a shot. Are there any GS5 ROMs for us? I feel so out of it lol.
I've been flashing since the OG Droid and had close to 10 rooted phones but after getting my GS4 and having everything working perfect(including the mods, I.e. WiFi Ap), I just left it
loudaccord said:
Definitely gonna keep my MDK bootloader. The funny thing that's making me want to change is the App to SD card feature in the updates.
I'll make the switch from CWM to TWRP and give stock TW KK a shot. Are there any GS5 ROMs for us? I feel so out of it lol.
I've been flashing since the OG Droid and had close to 10 rooted phones but after getting my GS4 and having everything working perfect(including the mods, I.e. WiFi Ap), I just left it
Click to expand...
Click to collapse
Some roms like echoe have some galaxy s5 ui
Give it a try http://forum.xda-developers.com/showthread.php?t=2702592
Sweet, I'll give it a go. Thanks!
loudaccord said:
Sweet, I'll give it a go. Thanks!
Click to expand...
Click to collapse
I'd use Flashify from the Play Store to update to a new recovery. Using Goo or ROM Manager can lead to possibly having to Odin back to stock and start fresh... Couldn't tell you exactly why but it's happened to a few of us including me.
Also... Go for a ROM like C ROM, Mahdi, or Liquid Smooth... Ditch TW
Sent from my SCH-I545 using Tapatalk
I too have MDK so.... :highfive:! I am running Hyperdrive RLS 15 and it runs flawless. Loads of extra features if you like that sort of stuff. I used the Ktoonz Kernel with it so it comes with the KTweaker App for complete control over the kernel. Loads of battery life. Its 4.3 but if you want 4.4 then wait about a week or so and Sbreen94 will have it released (atleast that is his current time frame).
I have an Lg G2 VS980 running ota 26A and I am trying to install the cyanogenmod 11 nightly. The only problem Is it keep bootlooping. I wipe the phone correctly and everything then install the zip. CWM (I have the latest version of Clockworkmod Touch) says the install was successful. I have tried everything to get this rom installed. I have done multiple wipes I have downloaded the latest nighties I've even tried installing a custom kernel alongside the rom, all the same result the phone would flash the LG logo on the screen turn off vibrate and repeat. Believe me when I say this I have tried everything to think of but still I won't boot to Cyanogenmod. I have rooted correctly using stumproot(It does work on the G2) and flashed CWM touch with flashify. I've followed the steps to flash perfectly still bootloop.
I need help with this I am tired of LG optimus ui and lg software and I really want to have Cyanogenmod on this phone. What Do I need to do to successfully flash this rom and use cm because at this point I have nothing.
So If anyone can help that would be GREATLY appreciated Ive lost count of times ive been bootlooped, and I really want cyanogenmod installed. If not CM then something like PA
Thanks again
_{Techmo906}-
Though I may have done something wrong but I don't know.
(lesson learned I don't take ota updates)
Techmo906 said:
I have an Lg G2 VS980 running ota 26A and I am trying to install the cyanogenmod 11 nightly. The only problem Is it keep bootlooping. I wipe the phone correctly and everything then install the zip. CWM (I have the latest version of Clockworkmod Touch) says the install was successful. I have tried everything to get this rom installed. I have done multiple wipes I have downloaded the latest nighties I've even tried installing a custom kernel alongside the rom, all the same result the phone would flash the LG logo on the screen turn off vibrate and repeat. Believe me when I say this I have tried everything to think of but still I won't boot to Cyanogenmod. I have rooted correctly using stumproot(It does work on the G2) and flashed CWM touch with flashify. I've followed the steps to flash perfectly still bootloop.
I need help with this I am tired of LG optimus ui and lg software and I really want to have Cyanogenmod on this phone. What Do I need to do to successfully flash this rom and use cm because at this point I have nothing.
So If anyone can help that would be GREATLY appreciated Ive lost count of times ive been bootlooped, and I really want cyanogenmod installed. If not CM then something like PA
Thanks again
_{Techmo906}-
Though I may have done something wrong but I don't know.
(lesson learned I don't take ota updates)
Click to expand...
Click to collapse
What did you use for a backup? TWRP via Autorec?
I used flashify for it
Sent from my VS980 4G using XDA Free mobile app
Techmo906 said:
I used flashify for it
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
I see. Was trying to find a common element, but there goes that theory.
There appears to be a number of people having the same problem with VS98024a and VS98026a. No solution yet so far. At least I haven't found one yet.
To clarify you are running CWM not TWRP?
P.S.:
I might have found our problem. Maybe?
The CM 11 M7 snapshot is based on Android 4.4.2.
I have not seen M7 version for vs980...... Let me know if you find one.
Twrp
Sent from my VS980 4G using XDA Free mobile app
http://forum.xda-developers.com/showthread.php?t=2702958
Issue resolved
was able to Flash Paranoid Android Issue resolved
I have the solution..... What the problem is is the newer bootstacks don't have an exploit... The Loki is killed.... So what you are going to want to do is downgrade your bootstack...12b is one that will run some of the older ROMs but 24a is what most are using to build off of.... if you need more direction then this let me know
pjgraber03 said:
I have the solution..... What the problem is is the newer bootstacks don't have an exploit... The Loki is killed.... So what you are going to want to do is downgrade your bootstack...12b is one that will run some of the older ROMs but 24a is what most are using to build off of.... if you need more direction then this let me know
Click to expand...
Click to collapse
Ya I would like to use Cm so I would like to know how I do this To a point I like PA but my original goal was CM so How would I do this?
Techmo906 said:
Ya I would like to use Cm so I would like to know how I do this To a point I like PA but my original goal was CM so How would I do this?
Click to expand...
Click to collapse
The link I provided explains how to install CM on 26A. Did you not even bother to look at it?
Good afternoon
I am on verizon and I just flashed back to KK from LP I am on 12B. I just Rooted with the LG one click root. I also downloaded Flashify.
I want to get TWRP for the G3, Where do I go to Get TWRP for verizon? There is the TWRP Manager app I downloaded but Uninstalled because it wanted fix a partition so it can write to the SD card. I said no then uninstalled it.
Should I redownload the App and let it fix or do something different? It has been awhile since I rooted and ROM'd want to get back into it.
the last time I rooted and Rom'd was in 2009 when I had my thunderbolt
thanks again for the information
Chris
You are fine with letting it do the fix. Be sure to get the vs985 version of twrp
Sent from my VS985 4G
MORANDCHI said:
Good afternoon
I am on verizon and I just flashed back to KK from LP I am on 12B. I just Rooted with the LG one click root. I also downloaded Flashify.
I want to get TWRP for the G3, Where do I go to Get TWRP for verizon? There is the TWRP Manager app I downloaded but Uninstalled because it wanted fix a partition so it can write to the SD card. I said no then uninstalled it.
Should I redownload the App and let it fix or do something different? It has been awhile since I rooted and ROM'd want to get back into it.
the last time I rooted and Rom'd was in 2009 when I had my thunderbolt
thanks again for the information
Chris
Click to expand...
Click to collapse
If you don't trust the app, you can do it yourself using http://forum.xda-developers.com/showthread.php?t=2317790
Download the latest TWRP here:
https://dl.twrp.me/vs985/
sirkevinus said:
If you don't trust the app, you can do it yourself using http://forum.xda-developers.com/showthread.php?t=2317790
Download the latest TWRP here:
https://dl.twrp.me/vs985/
Click to expand...
Click to collapse
thanks for the Information, did it last night and everything is good. Made a Nadroid backup.. Now the hard part is trying to figure out what ROM to flash to
Was looking at skydragon or Resurrection.. Choices Choices Choices
thanks again
Chris
Latest TWRP is here (v2.8.6.1). Just flash the file in recovery.
Try both ROMs and a couple others, too! I suggest starting with a stock-based ROM, getting a feel for the difference (smaller delta), then moving to an AOSP/CM-based ROM.
epidenimus said:
Latest TWRP is here (v2.8.6.1). Just flash the file in recovery.
Try both ROMs and a couple others, too! I suggest starting with a stock-based ROM, getting a feel for the difference (smaller delta), then moving to an AOSP/CM-based ROM.[/QUOTE
I just installed Liquidsmooth ROM for the LG G3 on VZW. I flashed it and now it keeps poping up google play services has stopped. How do I get it to work so I can sign in and download my google stuff?
thanks alot
Chris
Click to expand...
Click to collapse
MORANDCHI said:
epidenimus said:
Latest TWRP is here (v2.8.6.1). Just flash the file in recovery.
Try both ROMs and a couple others, too! I suggest starting with a stock-based ROM, getting a feel for the difference (smaller delta), then moving to an AOSP/CM-based ROM.[/QUOTE
I just installed Liquidsmooth ROM for the LG G3 on VZW. I flashed it and now it keeps poping up google play services has stopped. How do I get it to work so I can sign in and download my google stuff?
thanks alot
Chris
Click to expand...
Click to collapse
Did you flash the gapps with the rom.? I'm guessing that is a lollipop rom so you need the lollipop gapps to go with. There should be a link for the gapps in the same thread as you got the rom.
Sent from my VS985 4G using XDA Free mobile app
Click to expand...
Click to collapse
Make sure that you wiped properly (including System and Data partitions, as well as the caches) in TWRP.
After that, make sure that you installed the Gapps and the correct version of them for the ROM. I like these packages.
Thank you all for the info, I wiped and flashed the rom with the right gapps.
Chris
Hey guys! I'm using a Galaxy Note with a Bell board (was originally AT&T but that bricked because at the time I thought flashing an N7000 ROM would work, D'oh!) and I want to upgrade to a Jelly Bean Rom. I'm using Blackstar XI, a 4.0.4 ROM, and I'm looking for a lightweight JB rom. It can lack stylus/pen support, I found myself not using that feature as much as I thought I would.
Would I run into any issues using a QuincyATT Cyanogenmod 10.1.3 ROM, considering it's a Bell note board? Would I need to unlock my SIM first? And I recall there being a trick with Notepad++ I needed to do in order to make it work, even on my AT&T board.
I just have an issue with heavy RAM usage at boot and I can't even run some apps, since I know touchwiz is stupid.
Anyone willing to help me get it running on my note? Any help would be appreciated!
MoronDroid said:
Hey guys! I'm using a Galaxy Note with a Bell board (was originally AT&T but that bricked because at the time I thought flashing an N7000 ROM would work, D'oh!) and I want to upgrade to a Jelly Bean Rom. I'm using Blackstar XI, a 4.0.4 ROM, and I'm looking for a lightweight JB rom. It can lack stylus/pen support, I found myself not using that feature as much as I thought I would.
Would I run into any issues using a QuincyATT Cyanogenmod 10.1.3 ROM, considering it's a Bell note board? Would I need to unlock my SIM first? And I recall there being a trick with Notepad++ I needed to do in order to make it work, even on my AT&T board.
I just have an issue with heavy RAM usage at boot and I can't even run some apps, since I know touchwiz is stupid.
Anyone willing to help me get it running on my note? Any help would be appreciated!
Click to expand...
Click to collapse
If you like blackstar, I would just flash Blackstar Blackjelly after doing a backup. It's what I've been running as my go-to on my Telus note. The other jb's are great too, but cm comes with the odd small bug like echo on speaker phone. Most of the customizations make them worth trying though.
Sent from my SAMSUNG-SGH-I717
Sweet. I could give that a try if the Cyanogenmod ROM doesn't work. Is there anything I need to do in preparation, since this is technically a Bell note? Or can I just go ahead and flash the ROM without any changes to the ZIP?
MoronDroid said:
Sweet. I could give that a try if the Cyanogenmod ROM doesn't work. Is there anything I need to do in preparation, since this is technically a Bell note? Or can I just go ahead and flash the ROM without any changes to the ZIP?
Click to expand...
Click to collapse
I'm assuming you have an unlocked bootloader already since you are running cm. Just be sure to have latest cm recovery or gimmeitorilltell's twrp (although other versions work with Jellybean, if you try kitkat or lollipop you'll have problems). Make sure you are flashing a quincyatt rom.
I have been using SGH-I717ATT-UCMD3-Modem with great success for a radio. Your mileage may vary.
If you get no signal, before blaming the rom, first check your mobile networks access point names and settings to be sure they match your carrier. (A good idea is to take a couple screenshots of your settings now before you flash any new roms as there are quite a few numbers involved)
Sent from my SAMSUNG-SGH-I717
Good news! I tried the CM10.1.3 ROM and it worked well minus two small gripes:
1. Occasional freeze/hang on lock screen, causing it to reboot
2. Random artifacting/crashes during video playback/browsing through gallery
I'm gonna say this is the best performing ROM I've tried so far, but I'm going to give BlackJelly a try! I'll keep you posted. Just figured I'd give Cyanogenmod a proper shot now that I know how to install ROMs!
developweb said:
I'm assuming you have an unlocked bootloader already since you are running cm. Just be sure to have latest cm recovery or gimmeitorilltell's twrp (although other versions work with Jellybean, if you try kitkat or lollipop you'll have problems). Make sure you are flashing a quincyatt rom.
I have been using SGH-I717ATT-UCMD3-Modem with great success for a radio. Your mileage may vary.
If you get no signal, before blaming the rom, first check your mobile networks access point names and settings to be sure they match your carrier. (A good idea is to take a couple screenshots of your settings now before you flash any new roms as there are quite a few numbers involved)
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Time for BlackJelly! Downloading now.
I also may need some help getting the SIM to work once this ROM is on. So that way, I can use this stock-rom based OS for actual phone things instead of it just being a tiny tablet! Yay!
Can you point me in the direction of the latest TWRP recovery that I can flash through Odin?
MoronDroid said:
Time for BlackJelly! Downloading now.
I also may need some help getting the SIM to work once this ROM is on. So that way, I can use this stock-rom based OS for actual phone things instead of it just being a tiny tablet! Yay!
Can you point me in the direction of the latest TWRP recovery that I can flash through Odin?
Click to expand...
Click to collapse
I'm not sure about Odin, but I flashed the latest TWRP to my device using Rashr from Google Play store.
Other install methods are described here:
https://twrp.me/devices/samsunggalaxynote1att.html
Sent from my SAMSUNG-SGH-I717
developweb said:
I'm not sure about Odin, but I flashed the latest TWRP to my device using Rashr from Google Play store.
Other install methods are described here:
https://twrp.me/devices/samsunggalaxynote1att.html
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Upgrading my recovery now, yay! I also have the Phase kernel because I've heard a lot of good things about it.
MoronDroid said:
Upgrading my recovery now, yay! I also have the Phase kernel because I've heard a lot of good things about it.
Click to expand...
Click to collapse
Backup, backup, backup. If TWRP successfully installs then backup. If something goes wrong you can revert everything or just the boot partition. (Kernel)
Sent from my SAMSUNG-SGH-I717