baseband p10 to solve battery drop after 30%
for jellybean and kitkat
use it with any recovery and flash
for kitkat rom by sai use jellybean version because his rom has same modem name as jellybean in etc/firmware
or replace modem.img file in zip before flashing rom.
had posted this modem after testing both stock jellybean,kitkat roms,..
both file contains same modem file i have just rename it for discovery and cm11 based rom
so ucan download any file and replace and rename modem file in your rom
blueandro said:
baseband p10 to solve battery drop after 30%
for jellybean and kitkat
use it with any recovery and flash
Click to expand...
Click to collapse
hey hi,
installation aborted error 07
download it again
or copy modem file to etc/firmware/
and set pemisson 644
Are you sure?
I use the F1 baseband and it's perfect in every way. The P basebands always gave me various bluetooth issues...
What rom u using
Related
i flashed ma rom to lightining rom (custom rom) nd currently i have some issues with internet and downloads..i donno wot my stock firmware is..i bouught it from india.'m sorry i am new to these stuffs...how can i flash ma rom bak to the orginal state....how many times can a rom b flashed?? i downloaded the orginal version but it has 5 files but donno how to use it, the files are as follows
1.CODE_I9100XWKE8_CL214845_REV02_user_low_ship.tar .md5
2.EFS_I9100XWKE8_CL214845_REV02_user_low_ship.md5
3.GT-I9100-MULTI-CSC-ODDKE2.tar.md5
4.KERNEL_I9100XWKE8_CL214845_REV02_user_low_ship.t ar.md5
5.MODEM_I9100DDKE2_REV_02_CL1007315.tar.md5
allthatrocks said:
i flashed ma rom to lightining rom (custom rom) nd currently i have some issues with internet and downloads..i donno wot my stock firmware is..i bouught it from india.'m sorry i am new to these stuffs...how can i flash ma rom bak to the orginal state....how many times can a rom b flashed?? i downloaded the orginal version but it has 5 files but donno how to use it, the files are as follows
1.CODE_I9100XWKE8_CL214845_REV02_user_low_ship.tar .md5
2.EFS_I9100XWKE8_CL214845_REV02_user_low_ship.md5
3.GT-I9100-MULTI-CSC-ODDKE2.tar.md5
4.KERNEL_I9100XWKE8_CL214845_REV02_user_low_ship.t ar.md5
5.MODEM_I9100DDKE2_REV_02_CL1007315.tar.md5
Click to expand...
Click to collapse
One thats not what you flash you flash the full tar file as instructed via PDA .
Be better if you read and follow the instructions from where you got that file from .Or follow the instructions in the stock rom posts .
jje
If I'll delete the modem file from the any ROM's zip file, it will install everything fine except the modem?
Same thing with the kernel file into the zip?
There is no problem to delete the modem file (where is kernel file @ the zip?) and flash it without modem - cuz I want to keep the modem I've got instead of flashing again the modem.....
thanks!
I assume you are talking about stock firmware here.
PsyOr said:
If I'll delete the modem file from the any ROM's zip file, it will install everything fine except the modem?
Same thing with the kernel file into the zip?
There is no problem to delete the modem file (where is kernel file @ the zip?) and flash it without modem - cuz I want to keep the modem I've got instead of flashing again the modem.....
thanks!
Click to expand...
Click to collapse
Not absolutely sure but this should work. However it is probably better or easier to go the other way: flash the entire firmware and then revert to the kernel/modem you prefer. Kernels and modems can be individually downloaded either to be flash with CWM or ODIN.
The kernel of a stock firmware can be found in the corresponding I9100_CODE.... tar file. If you look into this tar you will find a file named zImage, this is the kernel.
Thanks mate, I'm talking about a custom ROM (AOKP based)
if its possible to do this ,,, ?
[VIA CWM]
If you flash a custom rom and you end up with a modem you don't like you can re- flash preferred modem separately after you have installed the ROM. There are several threads here that have many downloadable modems to choose from. All the best.
Sent from my GT-I9100 using xda premium
HANDSY said:
If you flash a custom rom and you end up with a modem you don't like you can re- flash preferred modem separately after you have installed the ROM. There are several threads here that have many downloadable modems to choose from. All the best.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
yeah, i know mate, but just curious to avoid this action (of flashing other modem again, even though its a pice of cake) if i'll delete the modem.bin file from the ROM's zip file // or kernel file .... if it will flash the ROM without any issue (without the modem/kernel file that i've deleted from the zip)
I see, I'm sorry I can't advise you on that as I'm a noob myself and have not started at altering ROMs prior to flashing. Sorry.
Sent from my GT-I9100 using xda premium
And why delete and not replace it?
Odoslané z GT-I9100 cez Tapatalk 2
Stileth said:
And why delete and not replace it?
Odoslané z GT-I9100 cez Tapatalk 2
Click to expand...
Click to collapse
because my current modem is just fine, i see no reason to change it [and the ROM comes with other modem]
PsyOr said:
If I'll delete the modem file from the any ROM's zip file, it will install everything fine except the modem?
Same thing with the kernel file into the zip?
There is no problem to delete the modem file (where is kernel file @ the zip?) and flash it without modem - cuz I want to keep the modem I've got instead of flashing again the modem.....
thanks!
Click to expand...
Click to collapse
Most roms do not include a modem. (Well all the proper roms). And like previously stated, just take note of what modem you have and just reflash it in cwm recovery.
Sent from my Nexus 7 using xda premium
PsyOr said:
If I'll delete the modem file from the any ROM's zip file, it will install everything fine except the modem?
Same thing with the kernel file into the zip?
There is no problem to delete the modem file (where is kernel file @ the zip?) and flash it without modem - cuz I want to keep the modem I've got instead of flashing again the modem.....
thanks!
Click to expand...
Click to collapse
as kilometers4 said most custom roms do not include modem
i just knw 1 aokp based rom that includes a modem ie : Resurrection Remix Rom By Westcrip
...
also if u delete the modem from the zip make sure u remove it from the updater script too
PsyOr said:
because my current modem is just fine, i see no reason to change it [and the ROM comes with other modem]
Click to expand...
Click to collapse
I meant to replace it inside of the ROM package.
Odoslané z GT-I9100 cez Tapatalk 2
Currently i am on Stock ROM (rooted) and my baseband version is-
MOLY.WR8.W1248.MD.WG.MP.V6.P10
and i want to update my baseband to-
MOLY.WR8.W1248.MD.WG.MP.V6.P18
I know basebands can be updated using the "modem" file but can any dev provide me a flashable zip to do it.
Please dont suggest to change the rom but i want to stay on stock (rooted).
Thank you
fa1zali said:
Currently i am on Stock ROM (rooted) and my baseband version is-
MOLY.WR8.W1248.MD.WG.MP.V6.P10
and i want to update my baseband to-
MOLY.WR8.W1248.MD.WG.MP.V6.P18
I know basebands can be updated using the "modem" file but can any dev provide me a flashable zip to do it.
Please dont suggest to change the rom but i want to stay on stock (rooted).
Thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2426034
Heres the link to the p18 baseband STOCK ROM
it cant be provided as a small patch file so u ll hav to update it totally
u can either flash it VIA CMW r SP toold also :good:
jayadu said:
http://forum.xda-developers.com/showthread.php?t=2426034
Heres the link to the p18 baseband STOCK ROM
it cant be provided as a small patch file so u ll hav to update it totally
u can either flash it VIA CMW r SP toold also :good:
Click to expand...
Click to collapse
thanks for the suggestion will try it.
jayadu said:
http://forum.xda-developers.com/showthread.php?t=2426034
Heres the link to the p18 baseband STOCK ROM
it cant be provided as a small patch file so u ll hav to update it totally
u can either flash it VIA CMW r SP toold also :good:
Click to expand...
Click to collapse
i downloaded the cwm flashable version as you suggested
But as i had earlier said i did not wanted to change the whole rom
So i did a little research on xda and came to know you can update the baseband by replacing the modem.img so what i did was
i made a flashable zip of modem.img by extracting it from your mentioned rom and flashed it on my phone and it worked.:good:
Hey ! I installed "" ★[I9300 4.4.4 ROM][13 Dec.] ★ OFFICIAL PORT DN4 from E-team ★ [ Final Version 2014]★"" .. But I have a problem now .. when I want to call someone it gives me not registered on network
please help.
when I dial *#06# it gives me my IMEI
Issam00 said:
Hey ! I installed "" ★[I9300 4.4.4 ROM][13 Dec.] ★ OFFICIAL PORT DN4 from E-team ★ [ Final Version 2014]★"" .. But I have a problem now .. when I want to call someone it gives me not registered on network
please help.
when I dial *#06# it gives me my IMEI
Click to expand...
Click to collapse
Hi!
Dou you have an efs + modem backup from previous rom?
pappt said:
Hi!
Dou you have an efs + modem backup from previous rom?
Click to expand...
Click to collapse
I have Efs.img and Radio.img .
Issam00 said:
I have Efs.img and Radio.img .
Click to expand...
Click to collapse
Is your device carrier unlocked originally? Or unlocked later? (i bet for the second version)
Anyway, try to restore efs and modem, and flash an AOSP/CM based rom (which has no modem.bin or modem.img inside the zip, its important! check it before flash).
If the signal come back, and you can make phone calls, then post your baseband version.
I am having the same issue.I was about to flash Stock firmware via odin.
Before i did a full wipe including internal storage (TWRP).
Now i have official 4.3 firmware with Imei .But Now Network not registered
My device : i9300
Bulid : JSS15J.I9300XXUGNB6
Baseband : :I9300XXUGNA8
PLEASE HELP!
pappt said:
Is your device carrier unlocked originally? Or unlocked later? (i bet for the second version)
Anyway, try to restore efs and modem, and flash an AOSP/CM based rom (which has no modem.bin or modem.img inside the zip, its important! check it before flash).
If the signal come back, and you can make phone calls, then post your baseband version.
Click to expand...
Click to collapse
Thank you so much for your help .. I have a question . do I need to change my Rom or keep it and flash an AOSP .?
Now I installed 4.3 ROM official one and I had the same problem but I flashed these
Patched_BUUGMJ3_modem
Patched_XXUFMJ9_kernel
and now it's working well ... i really want that ROM but I can't use my phone without signal .. I don't know what's wrong
XbadaxeX said:
I am having the same issue.I was about to flash Stock firmware via odin.
Before i did a full wipe including internal storage (TWRP).
Now i have official 4.3 firmware with Imei .But Now Network not registered
My device : i9300
Bulid : JSS15J.I9300XXUGNB6
Baseband : :I9300XXUGNA8
PLEASE HELP!
Click to expand...
Click to collapse
You need to flash these patches ..
Patched_BUUGMJ3_modem
Patched_XXUFMJ9_kernel
Issam00 said:
Thank you so much for your help .. I have a question . do I need to change my Rom or keep it and flash an AOSP .?
Now I installed 4.3 ROM official one and I had the same problem but I flashed these
Patched_BUUGMJ3_modem
Patched_XXUFMJ9_kernel
and now it's working well ... i really want that ROM but I can't use my phone without signal .. I don't know what's wrong
Click to expand...
Click to collapse
So where are we now?
Does your signal came back with the patched modem/kernel combo?
pappt said:
So where are we now?
Does your signal came back with the patched modem/kernel combo?
Click to expand...
Click to collapse
Yes my signal came back because I installed 4.3 and I flashed the Patched_XXUFMJ9_kernel
but I wanna use that ROM but I couldn't fix the problem
Issam00 said:
Yes my signal came back because I installed 4.3 and I flashed the Patched_XXUFMJ9_kernel
but I wanna use that ROM but I couldn't fix the problem
Click to expand...
Click to collapse
the point is don't let the rom installer change the modem:
check in the updater-script file for modem change line, and delete it,
or delete the modem.bin from the zip
or change your patched modem in the zip
and after the rom, flash the boeffla kernel that fits to this rom's android version from here : http://www.boeffla-kernel.de/
i think this is it : http://boeffla.df-kunde.de/sgs3/boeffla-kernel/Stable_kk444/Series%207.x/7.6/boeffla-kernel-7.6-Samsung-i9300.recovery.zip.
pappt said:
the point is don't let the rom installer change the modem:
check in the updater-script file for modem change line, and delete it,
or delete the modem.bin from the zip
or change your patched modem in the zip
and after the rom, flash the boeffla kernel that fits to this rom's android version from here : http://www.boeffla-kernel.de/
i think this is it : http://boeffla.df-kunde.de/sgs3/boeffla-kernel/Stable_kk444/Series%207.x/7.6/boeffla-kernel-7.6-Samsung-i9300.recovery.zip.
Click to expand...
Click to collapse
Yes when I installed that ROM it changed my Modem .. How can I stop it ?
Issam00 said:
Yes when I installed that ROM it changed my Modem .. How can I stop it ?
Click to expand...
Click to collapse
as i wrote before: modifying the updater script in the META-INF\com\google\android\ folder is the easiest way, or replace your patched modem file in the zip
Issam00 said:
You need to flash these patches ..
Patched_BUUGMJ3_modem
Patched_XXUFMJ9_kernel
Click to expand...
Click to collapse
Do i have to flash Custom recovery To apply this patches?
Thankuuuu!
Now i can receive calls.
Hi all,
is it possible to take the kernel (boot.img) from any 5.0.2 firmware released for Galaxy Alpha? Or are there region specific settings in it?
So i could use later builds of the kernel (bugfixes included) for my actual firmware...
i think the kernel of 5.0.2 wont boot android 4.4.4
to get the boot.img file from the ROM .tar.md5 file & convert it to odin flashable format, check this video
https://www.youtube.com/watch?v=JfDC69p5878
Adelm2013x said:
i think the kernel of 5.0.2 wont boot android 4.4.4
to get the boot.img file from the ROM .tar.md5 file & convert it to odin flashable format, check this video
https://www.youtube.com/watch?v=JfDC69p5878
Click to expand...
Click to collapse
I only want to use it with Lollipop firmware. It won't boot KitKat for sure. Flashing no problem with flashify app...
I took the boot.img from the nordic countries firmware, build date 17.6.2015. Flashed with flashify, works flawlessly...!
SHA_NDY said:
I took the boot.img from the nordic countries firmware, build date 17.6.2015. Flashed with flashify, works flawlessly...!
Click to expand...
Click to collapse
can you upload this new boot.img?
there's a source of latest bootloader and modems galaxy alpha?
Took firmware directly from sammobile.com and extracted with winrar...
https://drive.google.com/file/d/0B1L1-mpF7OFmeFZTVU9HNGtyOU0/view?usp=sharing
SHA_NDY said:
Took firmware directly from sammobile.com and extracted with winrar...
https://drive.google.com/file/d/0B1L1-mpF7OFmeFZTVU9HNGtyOU0/view?usp=docslist_api
Click to expand...
Click to collapse
thank you for fast uploading. downloading from sammobile is so slowly
can you upload modem file too?
and last question there's improvement after installing this kernel?
yassine78 said:
thank you for fast uploading. downloading from sammobile is so slowly
can you upload modem file too?
and last question there's improvement after installing this kernel?
Click to expand...
Click to collapse
I don't know about improvements, sorry. Just wanted the latest Kernel...
Modem file I can upload tomorrow eventually, I'm with smartphone atm
yassine78 said:
can you upload modem file too?
Click to expand...
Click to collapse
Here it is: https://drive.google.com/file/d/0B1L1-mpF7OFmM2Fob3ZZV3U5VVk/view?usp=sharing
SHA_NDY said:
Here it is: https://drive.google.com/file/d/0B1L1-mpF7OFmM2Fob3ZZV3U5VVk/view?usp=sharing
Click to expand...
Click to collapse
thank you