Related
Anyone able to get the slideshow to work from your gallery? Mine tells me I need to choose at least two photos, lets me select them, then freezes. Anyone able to get it to work?
TIA
As long as you have photos in the gallery it should work. I've had at least 4 or 5 and I hit the slide show button it pops up and says display in Landscape and I normally click the box and it runs.
mine runs here no problems at all.
Changes for 1.1.1:
-Fix issues with being unable to reconnect after a disconnect -- no more needing to reboot after a disconnect
-Fix issue where the check box needed to connect to another device would not show up sometimes
-Fixed a blank toast message that was trying to report a disconnect, now shows a proper error message
-Updated boot logo to one with the teamwin text
1.1.1 is currently only being released as a patch to apply on top of an existing 1.0.0 install.
If you are already running 1.0.0, simply install the update zip. No wiping is needed for the update.
If you don't have my ROM installed right now, you will need to factory reset, install both the 1.0.0 zip followed by the 1.1.1 zip.
There is only one update zip for all models.
We need someone who has a 1GB/8GB/2100MHz model to contact us and supply a boot image from this model of device so that we can offer a properly working boot.img.
Mirror 1
Mirror 2
What this ROM does not have:
-Gestures for back and menu do not work out of he box (there's an Xposed module that you can install to enable them that is free in the Play Store or another app that does not need Xposed documented further down in this post)
-Status bar does not hide itself
-Home + Power does not take a screenshot (Xposed can add screenshot options to the power menu)
-No companion mode that lets you receive calls, texts -- use SWApp Link free in the Play Store for this
-AGPS assistance data doesn't download by default. Use GPS Status and Toolbox to download it instead. GPS is confirmed working.
-Camera is rotated 90 degrees
-If you open the camera app and press the button to use the non-existant front facing camera, the app will FC. You will have to clear app data on the camera app to use the camera again.
-Many APNs are not included. You might have to add yours manually. This is a tethering ROM, not intended to be used with a SIM card.
-Some of the numbers on the stock dialer are not accessible - may be able to fix this with xposed and change the app's dpi.
What this ROM does have that stock Omate does not:
-Fully working native Bluetooth tethering to your phone including push notifications
-Fully working settings app including the ability to delete and change account settings
-Already has EnSec and build prop tweaks
-SuperSU
This is built using some MTK 6572 source for a different device. As such some things will be a lot different and that is the reason that items like the gestures for back and menu do not work.
You do not have to start with a stock ROM. This ROM will completely replace your existing system and boot/kernel.
Download the correct zip for your device. If you don't see your model listed, contact us and DO NOT install:
Mirror 1
Mirror 2
Install TWRP if you haven't and make a backup of your existing System, Data, and Boot
Factory reset
Install zip and reboot. First boot will take longer than usual
On first boot you will see the Welcome screen. Tap in the 4 corners of the app itself (not including the status bar) in a clockwise fashion (see here).
On your phone, turn on Bluetooth, enable Bluetooth tethering, and make your phone visible for pairing
On the watch, open settings. If you don't have a SIM card in the watch, go to more and check the box for airplane mode.
Turn on Bluetooth, find and pair with your phone.
Click on the Settings icon to the right of your phone's name (this is on the watch) Tap on Internet access.
Enjoy!
You will probably want to install Xposed:
You'll probably want to download All in one gestures from the Play Store.
Open Xposed Installer in app drawer, tap on Frameworks. Tap Install/Update. Grant root rights.
Still in Xposed, hit Ok after the install is done. Press the back button (icon in the upper left will also go back). Click on Modules. Check the box for GravityBox and All in one gestures (and probably any other modules).
Still in Xposed, hit back, Frameworks. Scroll down and reboot. Click Okay.
After reboot, open app drawer and find GravityBox, scroll down to Power tweaks. Check the top box for Advanced reboot menu and the box for Screenshot.
Open the All in one gestures app. Tap on the Swipe tab. Enable it. Scroll down to Left Area and tap on it. Choose Menu. Scroll down and tap on Right Area and choose Back.
Click on the All in one gestures icon in the upper left to slide open the menu. Tap on Transparency & Color. Slide the second slider all the way to the left to get rid of the glowing icons on the left and right.
You now have screen shot capability and have restored the stock gestures.
Press and hold power. Press Reboot. Press Reboot. Press OK.
Other recommended apps:
PNF or Push Notifications Fixer - You can use this app to change the frequency that the watch pings Google. When your phone changes connections (e.g. mobile network to Wi-Fi) the framework notifies all apps including apps like Hangouts that the connection has changed so that those apps can reconnect and get push notifications. Unfortunately your phone will not tell your watch when connections change. This app will help you start getting push notifications sooner after a connection change.
GMD Gesture Control - The free version can add a back button gesture. You'll have to buy the paid version to get the menu gesture back.
If you install Xposed framework, you can install this free module called All in one gestures and tweak it to enable gestures for the back and menu buttons.
Notes:
Bluetooth tethering had to be slowed down quite a bit to prevent the driver from crashing. We've slowed it down by setting the tcp buffer sizes really low. You can change the values of net.tcp.buffersize.bt to tweak it if you like. The crash seems to be kernel level or maybe even chip / hardware level.
Bluetooth on MTK is somewhat unstable. If it disconnects due to a driver crash, you may have to reboot the device to get Bluetooth working again. With version 1.1.1, you can probably just reconnect without having to reboot.
I am very busy. I probably won't have time to provide much support for this ROM. I don't owe you anything. If you don't like this ROM, I'll refund your full purchase price of free.
Special thanks to @Lokifish Marz @AdamOutler @toastcfh and @kuronosan
Reserved
Omg! It works great!
Word up!
Sent from my Galaxy Nexus using Tapatalk 2
Awesomesauce!
Dees!!! Ur da man!
hahahahahahah
eat dat MTK!
ROFL
Exactly where do I install the zip drive and do I extract it to the same folder as bt-rom?
syounger64 said:
Exactly where do I install the zip drive and do I extract it to the same folder as bt-rom?
Click to expand...
Click to collapse
don't extract it.
move it into the watch. boot in recovery mode and install zip.
make sure you have a backup of your system if things go sour.
ALWAYS BACKUP BEFORE DOING ANYTHING!!!
Can anybody please tell me what is the bettary life if i use it moderately ?
Sent from my SM-N9005 using XDA Premium 4 mobile app
juanflight said:
don't extract it.
move it into the watch. boot in recovery mode and install zip.
make sure you have a backup of your system if things go sour.
ALWAYS BACKUP BEFORE DOING ANYTHING!!!
Click to expand...
Click to collapse
Thanks but after installing goomanager. It says denied supers request. How do I fix that? How do u boot in recovery mode if my power button isn't doing anything when I press it? When I want to back up of my system is that done via goomanager or supersu?
Sorry for all these questions as I'm not familiar with this process.
Dees_Troy said:
I don't owe you anything. If you don't like this ROM, I'll refund your full purchase price of free.
Click to expand...
Click to collapse
Haha, love it!
You are a great dev Dees. It's people like you that make this place what it is, a haven for tech lovers. Great job!
First thing I did was install myglass app and try and connect it to glass and it still crashes. Oh well hopefully we are going to get something good out of the source release. Thanks Dee's for all you do.
Sigh.... after reading this I got up to install the patch. The watch slipped off my wrist and fell on the floor. The metal clamp came off but I was able to put it back on then found out the power button wasn't working. I don't know if it was the result of the fall but while I was looking at supersu I might have hit on something and the watch rebooted then got stuck until the battery drained out. Is it possible that the power button was disabled?
WOW, so I get mt watches on a Thursday and the best ROM yet comes out on Friday? I couldn't be more excited .. Awesome!
Not that I wont be installing this , just a quick question.. @Dees_Troy what version on the standard android mail client is included in this rom? I havent been able to get my watch logged into exchange. this is a big deal for me as I need to calendar to sync my appointments. Email and contacts from exchange on my watch are not that big a deal for me but the appointments are. Thanks and looking forward to checking out your efforts..
I use gravitybox to enable the navigation bar @60% on stock rom, but can't get it enabled with this rom. is it completely pulled from the framework or is there some other trick to enable the navbar?
Installation aborted
While attempting to install this ROM, I keep receiving the 'Installation aborted' message in recovery. I'm running Loki's setup on my 1/8/1900mhz Omate. Also, when I plug my watch in to my laptop with USB debugging mode on I cannot execute any adb command prompts.
I don't know if the two are related...but I'm sure it is something I screwed up.
Any thoughts?
After install I am having apn issues. On Loki's operative I can get H+ data but only Edge with this. Any suggestions? GoPhone APN settings are correct and have also tried the Att one too.
Everything else seems great so far. Testing BT with Glass next. Will update the post afterwards.
edit#1- I can successfully pair Glass as a headset and also bluetooth tether data. MyGlass does not force close but will not connect when it sees the device.
edit#2- APN settings are borked for HSPA+....
unable to use for internet access
when i check the box to enable internet access, nothing happens.
I am using 1/8/1900 TS
Cheers! This makes some libraries like AllJoyn works!
H3ll0w0rld08 said:
when i check the box to enable internet access, nothing happens.
I am using 1/8/1900 TS
Click to expand...
Click to collapse
samething happens on mine!
I've been using nova launcher for months and finally uninstalled the stock S launcher. Today, I went to put my phone into ultra power saving mode and now I cannot exit it. If I get a notification, I can switch to that app and get into system settings, but I cannot exit ultra power saving mode. Without a notification, I can't even turn the screen off. The home button does nothing (no launcher) and the UPSM toggle is missing from the notification window.
So, my question is- does anyone have the stock APK for the Samsung launcher -OR- know an ADB command or some other way to get out of UPSM?
You didn't say whether you looked at the full quick settings palette or just the selected tiles subset? You should find the power saving tile on the full palette. Also does the phone exit UPSM when you fully charge the phone battery?
If that doesn't work, then just download the firmware for your phone and you can extract the stock launcher with winrar.
.
fffft said:
You didn't say whether you looked at the full quick settings palette or just the selected tiles subset? You should find the power saving tile on the full palette. Also does the phone exit UPSM when you fully charge the phone battery?
If that doesn't work, then just download the firmware for your phone and you can extract the stock launcher with winrar.
.
Click to expand...
Click to collapse
There are no settings tiles. After I get a notification, I can pull down the notification screen (not before) and hit the gear to get the settings page. In there, there's only wifi, bluetooth, airplane mode, mobile networks, location, sound, and brightness. There's no way to get rid of UPSM.
Fully charging it didn't work. Fully discharging it didn't work. Wiping cache and dalvik didn't work.
Can you provide a link to the file in question? I'm not entirely clear on your terminology. I thought the firmware was just for the radio and such while the rom had the program files?
Kayden96 said:
There are no settings tiles. After I get a notification, I can pull down the notification screen (not before) and hit the gear to get the settings page. In there, there's only wifi, bluetooth, airplane mode, mobile networks, location, sound, and brightness. There's no way to get rid of UPSM.
Fully charging it didn't work. Fully discharging it didn't work. Wiping cache and dalvik didn't work.
Can you provide a link to the file in question? I'm not entirely clear on your terminology. I thought the firmware was just for the radio and such while the rom had the program files?
Click to expand...
Click to collapse
Have you rebooted? Usually does it for me.
I tried taking the battery out, restoring my SYSTEM backup from a few months ago, upgrading to a newer version of the stock rom, and nothing works.
Everything I've tried ends up with the phone going back into UPSM with no way to leave it.
Kayden96 said:
I tried taking the battery out, restoring my SYSTEM backup from a few months ago, upgrading to a newer version of the stock rom, and nothing works.
Everything I've tried ends up with the phone going back into UPSM with no way to leave it.
Click to expand...
Click to collapse
If you are using TWRP there is a file manager under advanced. Use that to navigate to the /system/app directory and rename "Emergency" apk to have .back appended to the end after the .apk. This will "hide" it from the system and should disable it. Btw the name of the apk has Emergency in it i don't recall the exact name of it though.
Kayden96 said:
Can you provide a link to the file in question?
Click to expand...
Click to collapse
No we can't. And the reason that we can't is that you didn't provide any details about your phone. The firmware is different for every model of S5 and carrier. We don't know if you have a 900T, 900F, 900A or some other S5 version. We can't see your phone and can do little unless you provide extensive details.
Simply go to a firmware site like sammobile, click on firmware and enter the model number of your phone. Or do a search of this forum. Then use the Odin program to write that firmware (factory software) to your phone.
.
I'm having the same issue on a Verizon S5. Under /system in twrp I don't see anything. Tried chmod but didn't help. Any suggestions?
Apps Drawer
Same thing happened to me. Mine was stuck in between normal and Ultra. I was able to go to my apps drawer, clicked on the gear/settings, found Power then disabled Ultra Power Saving mode there.
I had same issue and I SOLVED it.
No disable option in the notification drawer. Gear 'setting' option (in the notification drawer) only display few setting options (no disable ultra saving mode).
I solve the issue by holding down the HOME button to trigger Google NOW app. In the search bar of Google NOW app, I clicked the microphone button and said "OPEN SETTINGS". This will open the full version of setting window. If you scroll down, you will see the 'POWER SAVING MODE', click it and you will see the disable "ULTRA POWER SAVING MODE" option.
It's a unusual way but it worked.
I also faced the same issue while running Action Launcher 3. Google Now wasn't working for me, so the way I solved it is:
- press and hold the menu button (capacitive button on the left) and select "Manage Apps"
- from the three dots on the top right corner select "Reset app preferences"
- reboot
- pressing the home button showed up "TouchWiz Home", which then allowed me to select "Disable Ultra Power Savings mode"
-done
HTH
I have they same problem with S5 LTE+ on Android 4.4.4. (I hate this ****ing bad Samsung Software!!!!) The above two posts unfortunatly don't work for me because Google Now is not working and Home Button does nothing.
I will try to launch settings due adb if I find a PC to do this (Unfortunatly I'm on holiday at the moment)
Were you able to figure this out? Facing the same issue on my friends phone. Can't believe Samsung would takeover the phone like this.
kussface said:
Were you able to figure this out? Facing the same issue on my friends phone. Can't believe Samsung would takeover the phone like this.
Click to expand...
Click to collapse
Best I remember, it had something to do with disabling the stock launcher and I ended up reflashing.
thug_life_inc brought me to my personal solution. I had the problem with the Google Now Launcher. And there is the possibility to go to the app info by placing an app on the home screen, but not dropping it there, but above it (you know the area where you can access app info / delete the app).
That brought me to the settings page for the google app where i could delete the standard launching options.
I had very low battery (maybe 3 or 2%) and then i activated the ultra power saving mode. After a while, the phone battery died, so I recharged it. The problem now is that I got stucked in UPSM. Everything is black and white, I have no acces at any of my apps and the settings is incomplete, I mean I don`t find the "disable UPSM" function. I also cannot factory reset the phone, same reason, I only have acces to wi-fi, bluetooth, volume, brightness and location.
Thank you!!!!
Strykes_Daniel said:
thug_life_inc brought me to my personal solution. I had the problem with the Google Now Launcher. And there is the possibility to go to the app info by placing an app on the home screen, but not dropping it there, but above it (you know the area where you can access app info / delete the app).
That brought me to the settings page for the google app where i could delete the standard launching options.
Click to expand...
Click to collapse
Thank you! It worked for me!
I tried multiple methods include using microphone to trigger Google Now but still nothing in Settings. The idea is trigger the Launcher Picker. here are some notes
Wish I new this sooner, wasted a whole day figuring it out. This fix is way easier
The easy fix - just open the app drawer, drag the google app to app info and drop, clear defaults , when prompted choose you service providers origional default launcher
parislawrence said:
The easy fix - just open the app drawer, drag the google app to app info and drop, clear defaults , when prompted choose you service providers origional default launcher
Click to expand...
Click to collapse
That is not possible .. in UPSM there is no app drawer or any apps settings.
All,
I am coming from a V10 to the V30 and there is an annoying aspect to the camera that's different and that are driving me nuts. I'm wondering if there's anyway to fix it or change the behavior of the camera.
1: I shoot on manual 100% of the time. I never use auto mode. When I close the camera or switch to another app and restart it, it goes from Manual/Pro back to auto mode. On the V10 it stayed in the mode I last left it (in my case manual). How can I make this work the way the V10 did? I hate auto mode since it doesn't save as RAW, and I lose shots because I have to change modes every time.
You can create a shortcut icon on your homescreen that goes straight into manual stills shooting mode. Long press on the camera icon and you'll get about four options. Each option has a handle on it that you can drag out and create another shortcut icon for that particular item. That's what I've done.
If you're using Nova, press and hold on the camera icon, then press and hold on Manual Camera, drag it onto your desktop.
This is not launcher dependent. It's a feature of the version of Android.
Hello, I picked up my device and upgraded to 12.5.5 EU rom with regular OTA. Couple of questions where I couldn't find answers with Google.
1. Stock camera app does not remember the setting for 4K30 in Video settings. I select 4K30 but next time I open the app the setting goes back to 1080p30. Anyone has this issue?
2. Is there a way to set Google Photos as default photo app in stock camera app instead of Gallery?
3. I use app drawer but the phone keeps adding newly installed apps to the home screen. There was a toggle for this but couldn't find it in settings. Any ideas?
So far seems like a nice device. Good size and lightweight. I will install BSG Gcam on it but I still would like to use Stock camera for videos.
Thanks in advance for any help.
Also make sure battery optimization is on and app not allowed to run in background (unless needed of course). Some apps/processes are also called by other apps. Ultimately root is the way to go if you want full control.
Hello, manisa 236!
First I want to apologize for my English. I am still learning it. In this post I will try to answer some of your questions.
1. Stock camera app does not remember the setting for 4K30 in Video settings. I select 4K30 but next time I open the app the setting goes back to 1080p30. Anyone has this issue?
Open the stock camera app and go to settings, scroll down and activate "Save previous mode" slider.
2. Is there a way to set Google Photos as default photo app in stock camera app instead of Gallery?
I don't know it that is possible.
3. I use app drawer but the phone keeps adding newly installed apps to the home screen. There was a toggle for this but couldn't find it in settings. Any ideas?
Go to "Settings --> Home screen" and open the inside menu cold again "Home screen" and at the bottom of this menu you shall see the option "Place new apps on the Home screen" toggle. Just disable it.
Greetings from Spain!
Thank you very much for your answers. In camera app Save Previous Mode remembers the shooting mode (Photo, Video, Portrait etc ) but when I choose 4K30 under Video and open the app next time it still defaults to 1080p30. It looks like a bug.