Hey guys!
I've downloaded a V20h ROM, extracted some parts of it and put it in a flashable ZIP! There are two variants: The Full Package and the Light Package. I recommend the full one, but it is your choise. If you only want the modem, then take the light one.
All images are from LG source! No image has been edited in any way!
Contends
Full Package
Modem.img
rpm.img
tz.img
Light Package
Modem.img
The modem controls mobile data, wifi, bluetooth, etc.
RPM stands for Resource Power Management and, like the name saids, controls power to your modem.
TZ stands for Trust Zone. Read about it here
Compatibility
As far as I know EVERY ROM which is based on Android Lollipop (5.0+)
Only for D855
Why should I flash?
Because the radio was updated by LG in V20h and I think updates are always a good thing.
Responsibility
I am not responsible for any damage to your device. You do everything at your own risk. Do backups. Always.
Installation
Do a Modem Backup with this modified TWRP version.
If you don't want to download the modified Version:
Open a terminal emulator/ use in adb shell: Execute the folowing:
Code:
su
dd if=/dev/block/platform/msm_sdcc.1/by-name/modem of=/sdcard/modem.img
dd if=/dev/block/platform/msm_sdcc.1/by-name/rpm of=/sdcard/rpm.img
dd if=/dev/block/platform/msm_sdcc.1/by-name/tz of=/sdcard/tz.img
exit
You will find three images on your /sdcard/ folder. Save them good if anything goes wrong.
Download ZIP and copy to your sdcard
Flash ZIP in recovery
Reboot and enjoy!
Download
Full Package v2: https://www.androidfilehost.com/?fid=95916177934526947
Light Package v2: https://www.androidfilehost.com/?fid=95916177934526944
Changelog
v2 - 2015-02-11 - updated updater-script
v1- 2015-02-08 - initial release
Thank you!
Paul
access denied
looks like you don't have permission to access this folder. Make sure you are signed in to an account that has permission, or check with the developer to request access.
Kookitza said:
access denied
looks like you don't have permission to access this folder. Make sure you are signed in to an account that has permission, or check with the developer to request access.
Click to expand...
Click to collapse
sorry for this, should work now.
AndroidPaul said:
sorry for this, should work now.
Click to expand...
Click to collapse
I doubt Trusted Zone and Resource Power Manager images have much to do with the baseband functionality. Modem only should suffice.
That said, I doubt there's much harm flashing them.
LenAsh said:
I doubt Trusted Zone and Resource Power Manager images have much to do with the baseband functionality. Modem only should suffice.
That said, I doubt there's much harm flashing them.
Click to expand...
Click to collapse
Yes, you're probably right. Will look into it.
and if you screw something up i still got some more uploaded from kk and lp
@AndroidPaul
Hi.
Just reporting that I downloaded the Light Package and I find it very good.
For some time and using different Roms, I was having real trouble with booting and having no service.
I was going mental with it.
I tried other v20f and v20h but no good results...I flashed this light one and it all stopped.
If someone please knows if this problem is related to the modem or is this a know issue with the daily changes in CM 12? I am on RR v5.3.4 and with this modem all is sweet.
I am just curious to know the base of this problem which it seems affects others also.
By the way I always clean flash.
Thanks.
Access denied
droidbits said:
@AndroidPaul
Hi.
Just reporting that I downloaded the Light Package and I find it very good.
For some time and using different Roms, I was having real trouble with booting and having no service.
I was going mental with it.
I tried other v20f and v20h but no good results...I flashed this light one and it all stopped.
If someone please knows if this problem is related to the modem or is this a know issue with the daily changes in CM 12? I am on RR v5.3.4 and with this modem all is sweet.
I am just curious to know the base of this problem which it seems affects others also.
By the way I always clean flash.
Thanks.
Click to expand...
Click to collapse
I'm glad to hear that but I don't know where the other problems came from. Sorry :/
terenchan said:
Access denied
Click to expand...
Click to collapse
Must be something in Android File Host, I didn't change anything. Try again now.
Any news about 20i modem?
Thanks.
alex91s said:
Any news about 20i modem?
Thanks.
Click to expand...
Click to collapse
you can extract it from the zip and replace files from this rom with the ones from 20i and make your own flashable zip.
so as stated... this should work on ANY LG g3... including 852?
thanks
rodnar77 said:
so as stated... this should work on ANY LG g3... including 852?
thanks
Click to expand...
Click to collapse
What ? OP stated that is ONLY for d855.
AndroidPaul said:
Only for D855
Click to expand...
Click to collapse
alex91s said:
Any news about 20i modem?
Thanks.
Click to expand...
Click to collapse
d855 modem https://mega.co.nz/#!pxsBTaqA!yB937FdUStE8Qee8pyXS-7LnEDI0EfrvAssPF_Apyx4
RL77LUC said:
What ? OP stated that is ONLY for d855.
Click to expand...
Click to collapse
I totally read that wrong... Sorry. For some reason I read "all phones".... My eyes derped my brain
Thanks my friend for this.
Please one favor if this possible.
Can you make Full Package on EU kitkat 10L Modem for D855?
Or else where can i found it?
Thanks again.
Can anyone create a 20i FULL package?
Would be awesome.
cocous said:
Thanks my friend for this.
Please one favor if this possible.
Can you make Full Package on EU kitkat 10L Modem for D855?
Or else where can i found it?
Thanks again.
Click to expand...
Click to collapse
https://drive.google.com/folderview...sharing&tid=0Bw86veXkn-fic0lVVmUyVkVtSWc#list
Now it's time to raise as always annoying question - which one is better ? Any observation so far ?
I'm on H - no issues, just sometimes after reboot (quite rarely, but still) I got no signal and have to reboot again (but it could be rom/Kernel related maybe as well). LTE speed and signal is fine and without problems.
Related
.
This is the place for Q&A, general discussions, and post-installation chat about JasmineROM. Please keep your personal issues that are not related to the development, such as themes and other stuff, here.
.
Looks great. Will drive it for a few days and report back if there's any issues.
Thanks for all of your hard work & our 1st ROM.
Will be a version for the D855 ?
drmspidi said:
Will be a version for the D855 ?
Click to expand...
Click to collapse
I don't have this device, but you may test it yourself. Make nandroid backup, clean flash & report me back! It doesn't flash any firmware images (kernel, modem, ... etc); so, it's safe to test on other devices. If you've any issues, you can restore your backup.
DPI Affect
Heard mention that the DPI change affects the quick circle case display......is this true, or would it affect this? If it does change, what can be done post flashing to regain quick circle proper display?
Thanks for the work, btw!!!
hsbadr said:
I don't have this device, but you may test it yourself. Make nandroid backup, clean flash & report me back! It doesn't flash any firmware images (kernel, modem, ... etc); so, it's safe to test on other devices. If you've any issues, you can restore your backup.
Click to expand...
Click to collapse
But isn' t only for Verizon ?
What kind of problem I may have ?
JasmineRom
drmspidi said:
But isn' t only for Verizon ?
What kind of problem I may have ?
Click to expand...
Click to collapse
Yes this Rom is for the Verizon VS985 variant but he just stated that it does not flash a kernel, modem, or recovery of any sort. So the worst thing that may happen is your device bootloops or you just may not have data, working WiFi or Bluetooth, or some other minor issue. It is relatively safe to flash on other devices to try so long as you have a Nandroid backup of a working or stock ROM.
willyjay said:
Heard mention that the DPI change affects the quick circle case display......is this true, or would it affect this? If it does change, what can be done post flashing to regain quick circle proper display?
Thanks for the work, btw!!!
Click to expand...
Click to collapse
It works fine for me, but I can create a flashable zip to revert to stock DPI, if needed.
drmspidi said:
But isn' t only for Verizon ?
Click to expand...
Click to collapse
Yes, some Verizon devices may work on other carriers.
drmspidi said:
What kind of problem I may have ?
Click to expand...
Click to collapse
Unpredictable, it may work perfect or with issues related to hardware drivers: mainly Mobile Data, WiFi, bluetooth, ... etc. It could be fixed though with a converter replacements (port).
acparker18 said:
Yes this Rom is for the Verizon VS985 variant but he just stated that it does not flash a kernel, modem, or recovery of any sort. So the worst thing that may happen is your device bootloops or you just may not have data, working WiFi or Bluetooth, or some other minor issue. It is relatively safe to flash on other devices to try so long as you have a Nandroid backup of a working or stock ROM.
Click to expand...
Click to collapse
Exactly.
add ons
Do you think you will be adding volume enhancements soon?
Loving the Rom. Just needs themes and home back up and restore enabled
Saw that you would be pushing 1.0.1 update for tether. Will this just be an update zip or will it require a full rom flash?
USB Debugging Doesn't Stick After Reboot
I attempted to get USB Debugging to stick after rebooting by adding this line to build.prop:
persist.service.adb.enable=1
I reset the permissions to rw-r-r after editing build.prop before I rebooted. No luck, still not remaining enabled after a reboot.
lawtalking said:
Saw that you would be pushing 1.0.1 update for tether. Will this just be an update zip or will it require a full rom flash?
Click to expand...
Click to collapse
1.01 or 1.1 will be an update zip to dirty flash...
The Great Dahli llama said:
I attempted to get USB Debugging to stick after rebooting by adding this line to build.prop:
persist.service.adb.enable=1
I reset the permissions to rw-r-r after editing build.prop before I rebooted. No luck, still not remaining enabled after a reboot.
Click to expand...
Click to collapse
I'm aware of this issues...
I hope you can get Aroma working later on. The only downside is the size of the rom for download. The only bloat I find useful on this phone is multi window, knock on, and the clipboard. I hope to see some kind of volume enhancement as well.
wes53177 said:
Do you think you will be adding volume enhancements soon?
Click to expand...
Click to collapse
jerbear2011 said:
Loving the Rom. Just needs themes and home back up and restore enabled
Click to expand...
Click to collapse
eraursls1984 said:
I hope you can get Aroma working later on. The only downside is the size of the rom for download. The only bloat I find useful on this phone is multi window, knock on, and the clipboard. I hope to see some kind of volume enhancement as well.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Sure, at some point a new release of JasmineROM will include all requested features
Oh also the Verizon variants messaging app doesn't allow you to choose vibe pattern if there's a way you could enable that it would be awesome.
Sent from my Bump'd VS985 4G
I've got the itch to do a bit of themeing. Do you guys use the G3 TweaksBox themes? Im considering building for that since it is cross ROM compatible.
It will be a black/grey/orange theme using the Numix Cinnamon theme as inspiration.
Would there be an issue if I change the DPI to the original value.
I don't like the one with the ROM, and I can't get used to it.
What would be the best way to go about it?
jerbear2011 said:
Oh also the Verizon variants messaging app doesn't allow you to choose vibe pattern if there's a way you could enable that it would be awesome.
Click to expand...
Click to collapse
will look into it...
PiousInquisitor said:
I've got the itch to do a bit of themeing. Do you guys use the G3 TweaksBox themes? Im considering building for that since it is cross ROM compatible.
It will be a black/grey/orange theme using the Numix Cinnamon theme as inspiration.
Click to expand...
Click to collapse
Most apps/themes should work with this ROM since it's deodexed, except carrier-related apps: messaging, *telephony*, ... etc. I'll make my own themes & a list of compatible themes later.
Umbrella Corp said:
Would there be an issue if I change the DPI to the original value.
I don't like the one with the ROM, and I can't get used to it.
What would be the best way to go about it?
Click to expand...
Click to collapse
1.0.1 includes what you want; http://forum.xda-developers.com/showpost.php?p=56028380&postcount=129
This ROM ROCKS!!!! Thx!!!!
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
We are waiting for AD release. At least a beta?
mido25 said:
We are waiting for AD release. At least a beta?
Click to expand...
Click to collapse
Don't you know how to use the JustArchi's github?
Wow, really helps. I wish I have my OnePlus2 now.
Guihardrock said:
Don't you know how to use the JustArchi's github?
Click to expand...
Click to collapse
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
mido25 said:
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
Click to expand...
Click to collapse
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Guihardrock said:
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Click to expand...
Click to collapse
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
mido25 said:
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Lost recovery
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
JustArchi said:
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
Click to expand...
Click to collapse
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
eswa1068 said:
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
Click to expand...
Click to collapse
Use fastboot to flash the recovery
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
Thank you Sir
Tierri said:
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
Click to expand...
Click to collapse
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
amit_sen said:
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Yes. See the images to help you.
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
It's around 900 mb zip..?
And did anyone try that build..?
Mohit31 said:
It's around 900 mb zip..?
And did anyone try that build..?
Click to expand...
Click to collapse
Its because of the aroma you can choose the gapps of your choice...
Guihardrock said:
Its because of the aroma you can choose the gapps of your choice...
Click to expand...
Click to collapse
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
This thing should be STICKY
Finally was able to install CM13 properly using this recovery without Google Services crashing.
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
Now i am in oos3 but when justarchi release archidroid i wont use any other rom, i had so great experience with this on my s3
Edit: i am gonna try it :3 yo made me do it
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
rom is smooth as h*ll and battery is better than in normal cm13 but as i said the backed dont work yet :3 and aroma is not fully functional with the bootanimation and root (but the rom has the cm superuser)
A Video is worth a thousand words.
https://www.youtube.com/watch?v=2qPJd_E71Lg
More info: UntouchedAOSP (XDA Nexus 5)
http://forum.xda-developers.com/google-nexus-5/development/rom-untouchedaosp-aug-17-2015-t3182377
Clean AOSP ROM for D800 and D802. Enjoy !
DOWNLOAD
PS: Try to skip all the registration and stuff from Setup Wizard until you get to home screen, then go to app settings and enable all the permissions of Google Play Services and then configure your account like normal in any google app.
tchapa said:
my motherboard contains d800 and when I actually installed a firmware for d800 model and I made * # 06 # it gives me a serial number 358635056435200 after I did a search for this issue I found it for the D802 model! !!!
---------- Post added at 09:02 PM ---------- Previous post was at 08:59 PM ----------
[help]my motherboard contains d800 and when I actually installed a firmware for d800 model and I made * # 06 # it gives me a serial number 358635056435200 after I did a search for this issue I found it for the D802 model! !!!
I have a problem for the sim card which is totally not detectable for the D802 firmware and detectable for moments in firware d800
Click to expand...
Click to collapse
Did you try flash another modem?
Rangell11 said:
Did you try flash another modem?
Click to expand...
Click to collapse
haow!?!?!?
tchapa said:
haow!?!?!?
Click to expand...
Click to collapse
http://www.gregtwallace.com/lgg2-projects/modem/
d80030f (LP)
you said d800. flash it in twrp.
raptorddd said:
http://www.gregtwallace.com/lgg2-projects/modem/
d80030f (LP)
you said d800. flash it in twrp.
Click to expand...
Click to collapse
show me step by step please i don't no how exactly
tchapa said:
show me step by step please i don't no how exactly
Click to expand...
Click to collapse
download.
go into recovery twrp.
select install
and look for the file selected and flash
reboot system .
done
when I use AUTOREC after installing locks in black screen so I must repeat the installation of kitkat I hope that there is another solution except AUTOREC
AOSP ROM for D800 and D802 is ready.
I know this is untouched but can i ask how to add theme support to this Rom? İnstalling themeengine.apk is enough?
yken said:
I know this is untouched but can i ask how to add theme support to this Rom? İnstalling themeengine.apk is enough?
Click to expand...
Click to collapse
ThemeEngine needs framework changes. So, no, it's not possible.
Anyone can tell more about this ROM? This type of ROM is what I'm looking for. No modifications, no CM stuff in settings and overall across OS, just clean Android like stock Google ROM.
AssassinGEO said:
Anyone can tell more about this ROM? This type of ROM is what I'm looking for. No modifications, no CM stuff in settings and overall across OS, just clean Android like stock Google ROM.
Click to expand...
Click to collapse
A Video is worth a thousand words.
https://www.youtube.com/watch?v=2qPJd_E71Lg
More info: UntouchedAOSP (XDA Nexus 5)
http://forum.xda-developers.com/google-nexus-5/development/rom-untouchedaosp-aug-17-2015-t3182377
Rangell11 said:
A Video is worth a thousand words.
https://www.youtube.com/watch?v=2qPJd_E71Lg
More info: UntouchedAOSP (XDA Nexus 5)
http://forum.xda-developers.com/google-nexus-5/development/rom-untouchedaosp-aug-17-2015-t3182377
Click to expand...
Click to collapse
Ok it's kinda promising. But there is a "broken" kernel. Is there any way to make it look like stock android kernel? I know it's stupid but maybe there are builds or kernels that are based on stock Google one or something. And wanna know if there are any bugs.
Sorry for asking too much, I would test but I'm tired of doing that right now and I need my device for my daily basis, so I have no time for testing...
Oh, and yeah, is that "baseband unknown" thing normal?
Looks amazing but I cant install any gapps, so it is useless...
AssassinGEO said:
Ok it's kinda promising. But there is a "broken" kernel. Is there any way to make it look like stock android kernel? I know it's stupid but maybe there are builds or kernels that are based on stock Google one or something. And wanna know if there are any bugs.
Sorry for asking too much, I would test but I'm tired of doing that right now and I need my device for my daily basis, so I have no time for testing...
Oh, and yeah, is that "baseband unknown" thing normal?
Click to expand...
Click to collapse
Use lambda pure kernel
Google Play Services crash every 20 seconds, and some app is old. BTW the ROM looks awesome.
there is no root
work good in d800 with lambda kernel for root i flash supersu from twrp .now it is time to test battery life thank you
Ivanleta said:
Looks amazing but I cant install any gapps, so it is useless...
Click to expand...
Click to collapse
xpissio said:
Google Play Services crash every 20 seconds, and some app is old. BTW the ROM looks awesome.
Click to expand...
Click to collapse
Give it permission manually and it will gone. (Apps-pick the google services app -permission)
paul89rulez said:
there is no root
Click to expand...
Click to collapse
flash this https://www.androidfilehost.com/?fid=95916177934531508works like a charm
Delete.
Congratulations man. Its great team to be in.
Device: G928C
Rom: CyanogenMod 13
Kernel: Mynogen
Congratulations ,well done job
Interesting , ?
Camera doesn't work.
Well done
Sent from my SM-N920T using XDA-Developers mobile app
lkiiii said:
Camera doesn't work.
Click to expand...
Click to collapse
What kernel did you flash with it?
Milly7 said:
What kernel did you flash with it?
Click to expand...
Click to collapse
Doesn't matter the camera just doesn't work yet
Sorry fellas. Just waiting for a friend who helps me with the building. Camera doesn't work but that is definitely on the list.
Thanks and sorry for the wait. Soon as I get the clear, I'll update OP.
Thank you so much, will report back as soon as done.
I'm happy I finally got to install, Nor audio calls neither Soft keys, text messages are working same as data, youtube, music, chrome, this a good beginning.
I installed the version 3 from the link given (S6 Edge +)
Thank you again.
Thank you so much for your Note 5 support
Updated OP guys.
hey I downloaded a cm rom from the sprint note 5 section and tried your kernel. I got about 2 to 3 reboots and then it stops. my data is also not working. can you help
rudeboy87 said:
hey I downloaded a cm rom from the sprint note 5 section and tried your kernel. I got about 2 to 3 reboots and then it stops. my data is also not working. can you help
Click to expand...
Click to collapse
Hello and thanks for trying.. So it eventually booted? Supesu can cause those kind of reboots while it sets up. . The cm was was made for Tmobile and international.. You could try to make sure apn is right and change your data connection. Like from 4g to 3g. Sometimes that triggers it. And what modem are you using?
not sure what modem I'm using. Can you point me to one that may fix the issue? also I downloaded the rom you mentioned in the op and it booted with no reboots with your kernel. Reboots happen when I use a cm rom from the sprint side
rudeboy87 said:
not sure what modem I'm using. Can you point me to one that may fix the issue? also I downloaded the rom you mentioned in the op and it booted with no reboots with your kernel. Reboots happen when I use a cm rom from the sprint side
Click to expand...
Click to collapse
Then it would probably be due to the sprint CyanogenMod. I can't tell you how stable they are as I have an SM-N920I.. But if you tried the other Cm. Do you get data?
LiL_Assassin said:
Then it would probably be due to the sprint CyanogenMod. I can't tell you how stable they are as I have an SM-N920I.. But if you tried the other Cm. Do you get data?
Click to expand...
Click to collapse
no I didn't get data at all. tried to enable it in rom but it wont work. maybe its on my end
rudeboy87 said:
no I didn't get data at all. tried to enable it in rom but it wont work. maybe its on my end
Click to expand...
Click to collapse
Try checking your apns and that they are correct. And changing.. If that doesn't work.. It might because of sprint device. Fingers crossed.
LiL_Assassin said:
Hello guys! After a few months I decided to look into building a CyanogenMod Kernel for our beloved Note 5.
It is very much a work in progress and any issues should be reported here, please make any backup efs back ups, and nandroids
Link to download cm13 by rainbow dash. Please download this first and then download this kernel... As that is what I am using as my daily driver and if you have random reboots there are ways to fix that. Just report what is making you reboot and I will help you as much as I can. It is still a very beta build!
http://forum.xda-developers.com/s6-edge-plus/orig-development/cyanogenmod-13-unofficial-t3384252
Camera doesn't work.
Some apps don't work unless you personally remove it's libs and stop them from generating. (eg chomp sms on message send)
Source code: https://drive.google.com/file/d/0B8Ps-jVB8IblU0xRWTZUdDlMZ3c/view?usp=docslist_api
Credits @Konsstantine34 @Rainbow_Dash @UpInTheAir (a huge mentor and alot of respect) @A Close friend. @RaymanFX for his first build of cm13 for our device.
[UPDATE!] Due to unforeseen things. I must upload it as a boot.img download it and flash it via twrp and make sure to be able to view Img. Update will soon follow with a proper zip. Please make a backup and report back, any issues. Camera still does not work! Report back with any other issues! Or reboots.
https://www.dropbox.com/sh/7f7979c3fiq4016/AAAPgzCwjArGBd67TV8b3wMHa?dl=0
Click to expand...
Click to collapse
How can I flash your boot file. When I click install twrp doesn't see the .IMG extension.
CHE1 said:
How can I flash your boot file. When I click install twrp doesn't see the .IMG extension.
Click to expand...
Click to collapse
In install menu select install image(right side) then select img then tick boot and swipe to install. When installing zips select install zip back again
Or install an app called flashify and select that img as kernel and flash
Hey guys, I have no idea what I'm doing, so I'm wondering if anyone else has compiled a flashable Aosp or near-aosp build of android 7.0? I'm currently on PureNexus, and I'm looking for a very minimal ROM as it's the only way to reduce the lag on this low memory device we all know and love (hate?). Thanks!
Sent from my ONEPLUS A3003 using Tapatalk
jaju123 said:
Hey guys, I have no idea what I'm doing, so I'm wondering if anyone else has compiled a flashable Aosp or near-aosp build of android 7.0? I'm currently on PureNexus, and I'm looking for a very minimal ROM as it's the only way to reduce the lag on this low memory device we all know and love (hate?). Thanks!
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
I'm 100% with you on this. Minimum is best. I was wondering where the homecooked 7.0s are too.
Way too soon for a stable aosp build.
You'll probably see a flashable, pre-rooted stock rom appear first. Often these are tweaked, debloated etc so can be quite minimal.
Experimental aosp builds will likely emerge soon too but if you're the type to moan about roms not appearing fast enough and the low memory of a device you bought then you likely won't like bugs either. Maybe wait for a bit.
I wanna post mine - but GApps FC (some location provider error) and I am looking for a fix. This commit didn't fix it and I thought it might!
https://github.com/bshiznit/platform_frameworks_base/commit/4f18c68e03b996dab5df4d586db9c9af5647445a
Anyway - if there is interest (and it looks like there is) I might post as WIP this evening...
bshiznit said:
I wanna post mine - but GApps FC (some location provider error) and I am looking for a fix. This commit didn't fix it and I thought it might!
https://github.com/bshiznit/platform_frameworks_base/commit/4f18c68e03b996dab5df4d586db9c9af5647445a
Anyway - if there is interest (and it looks like there is) I might post as WIP this evening...
Click to expand...
Click to collapse
https://github.com/opengapps/opengapps/wiki/Notes-for-Android-7.0 this may help
USBhost said:
https://github.com/opengapps/opengapps/wiki/Notes-for-Android-7.0 this may help
Click to expand...
Click to collapse
Thanks! It's unclear from that if there is something I can cherry-pick, or what Any thoughs from a fellow dev?
@jaju123, @Jeff_in_LA, @astralbee, @USBhost threw my WIP build up under Android Development:
http://forum.xda-developers.com/nexus-9/development/rom-t3451480/
bshiznit said:
@jaju123, @Jeff_in_LA, @astralbee, @USBhost threw my WIP build up under Android Development:
http://forum.xda-developers.com/nexus-9/development/rom-t3451480/
Click to expand...
Click to collapse
Cool, thanks!
Jeff_in_LA said:
Cool, thanks!
Click to expand...
Click to collapse
You bet - just remember it is a work in progress
No worries. I appreciate all the hard work you did on this.
USBhost said:
https://github.com/opengapps/opengapps/wiki/Notes-for-Android-7.0 this may help
Click to expand...
Click to collapse
I got a bare bones up and working w/ Opengapps but I can't get root to work. Tried latest SuperSu but no go. It tries to install as systemless and then fails not sure why Never did that on my MM builds
@USBhost You see anything in my git repos??? Basically the same as my MM builds.
Attaching some twrp screenshots and recovery.log below.
If anyone can help it would be appreciated.
Thanks
fhem said:
I got a bare bones up and working w/ Opengapps but I can't get root to work. Tried latest SuperSu but no go. It tries to install as systemless and then fails not sure why Never did that on my MM builds
@USBhost You see anything in my git repos??? Basically the same as my MM builds.
Attaching some twrp screenshots and recovery.log below.
If anyone can help it would be appreciated.
Thanks
Click to expand...
Click to collapse
dont try v2.78 SR1
try only the v2.78
PS its not your fault
other ROMs have the same problem (the ones i tried)
USBhost said:
dont try v2.78 SR1
try only the v2.78
PS its not your fault
other ROMs have the same problem (the ones i tried)
Click to expand...
Click to collapse
Thanks but get same result --> I have attached another twrp recovery.log at bottom. It shows whats happening w/ su flash. I think LOL.
I had stock rooted but now am trying to get my aosp build up and running w/ no luck rooting. I am going to start over clean w/ fastboot stock w/o root and then try installing aosp rom and rooting.
I am also having the problem w/ twrp unhooking sometimes --- d**n N9 is very finicky!!!
Thanks for the help.
http://hastebin.com/usowulowal.diff
fhem said:
Thanks but get same result --> I have attached another twrp recovery.log at bottom. It shows whats happening w/ su flash. I think LOL.
I had stock rooted but now am trying to get my aosp build up and running w/ no luck rooting. I am going to start over clean w/ fastboot stock w/o root and then try installing aosp rom and rooting.
I am also having the problem w/ twrp unhooking sometimes --- d**n N9 is very finicky!!!
Thanks for the help.
Click to expand...
Click to collapse
You can also just try flashing the stock boot.img
And then flash SuperSU
USBhost said:
You can also just try flashing the stock boot.img
And then flash SuperSU
Click to expand...
Click to collapse
Ok finally got some time to play ---- fastboot is my friend LOL!!!
I used fastboot to wipe and start over w/ a clean tab -----> Only way I get root with my rom at current build is using twrp ---> flash my rom w/ stock boot image, flash supersu sr1 2.78 ---> bootup got root. That's all I can find that works. @USBhost Do you have an N k that allows root??? Do you have any idea what is going on with this??? BTW --- Trying to install as system install causes bootloop for me. So the only option I have at the moment is supply stock boot image and systemless root and w/ the rom. PITA