(Android 4.4 KitKat Unofficial for i9300 - No Bugs)
Hey what's up guys I need your help please.
I modified the latest rom by LiquidSmooth(and it's a KitKat Unofficial ROM for the i9300, no bugs), and I didn't have a computer at the time I was making it, so I modified and did it all through my phone. So what I am asking is, is there any way I can take that ROM I modified and make I flashable ROM out of it, so I can upload it and people can flash it to their own phones?
http://forum.xda-developers.com/showthread.php?t=2530923
Making CWM Flashable ZIP from canvas2 mobile
Sent from my GT-I9300 using Tapatalk 2
Simply Tech said:
(Android 4.4 KitKat Unofficial for i9300 - No Bugs)
Hey what's up guys I need your help please.
I modified the latest rom by LiquidSmooth(and it's a KitKat Unofficial ROM for the i9300, no bugs), and I didn't have a computer at the time I was making it, so I modified and did it all through my phone. So what I am asking is, is there any way I can take that ROM I modified and make I flashable ROM out of it, so I can upload it and people can flash it to their own phones?
Click to expand...
Click to collapse
why do you open two threads?
in addition, general is the wrong section. better report before you get flamed by anyone
I have a rooted Panasonic T11 with Android 4.1.2. Please help me upgrade to Kitkat 4.4.4. Thank you.
jhonybravo07 said:
I have a rooted Panasonic T11 with Android 4.1.2. Please help me upgrade to Kitkat 4.4.4. Thank you.
Click to expand...
Click to collapse
i haven't show this phone
but if you have cwm recovery available in the phone than flash the kitkat rom package using recovery
Where will i find Kitkat ROM package? And how to install this package?
It simply is not possible on many devices, but if you are lucky, your device may be supported by CyanogenMod, or some other custom ROM. If it is, you can get custom recovery and install the custom ROM which will bring the latest versions of Android to the table. I would look on your device forums for any information first.
Checking for an OTA the old fashioned way (Settings > About Device > System Updates) might also work if your device is well supported by the manufacturer and/or carrier.
jhonybravo07 said:
Where will i find Kitkat ROM package? And how to install this package?
Click to expand...
Click to collapse
you can search if your phone have cm support
if not then it is not posaible
Downgrade S3 to KitKat from Lollipop
So I installed Ressurection Remix Lollipop rom on my s3 but it' has to much bugs. I want to go back to kitkat. I tried to flash a kitkat rom but it failed and i can't find any instructions on the web. Could someone please help me ? Thanks in advance.
Did you wiped data and cache before installing?
TWRP recovery is the best nowadays.
Wipe Cache/dalvic after installation.
If you used Arter kernel on 5.1.1 based rom, then you should flash stock firmware via odin in order to gain wifi again.
Hi, I m having 900T device and I want to know can install this ROM http://forum.xda-developers.com/galaxy-s5/unified-development/rom-tipsyos-4-1-t3393668 and select - Rom klte: TipsyOS Rom v4.x ?
And currently I m on PhoeniX ROM V12.6, so can I simply wipe and install TipsyRom/CM13 or shud I start from the Stock ?
Thanks
I am unfamiliar with Phoenix ROM, but if it is CM based,
you should be able to do a simple wipe and flash it.
If Phoenix is Touchwiz based, I always recommend
starting from scratch. Hope that helps.
Yes Phoenix is TW based and I understood, but I also gave the link and asked which link to follow, klte ? Klteusc ? Etc
I know klte is for g900f but I m bit curious, and want specific advice so I dont brick my device
Sent from my SM-G935F using XDA-Developers mobile app
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
AbhinavIsgrt said:
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
Click to expand...
Click to collapse
You will get performance close to deodexed KitKat stock rom .. No problems so far .. surely upgrade your device to cm13 :good:
definitely no problems.. just great.
latest nightly works flawlessly..
there is plethora of feature in marshmallow and in being cyanogenmod
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
ulises.rodriguez said:
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
Click to expand...
Click to collapse
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
ABSathe said:
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
Click to expand...
Click to collapse
ABSathe, 1000 Thanks for the quick reply, for letting me know that I can directly clean flash cm13 over 5.1 and for the link to official nightlies !
Please confirm if this is the correct method to flash the CM13 ROM:
1) Boot into latest TWRP and Format Data: Wipe > Format DATA > Yes
2) Transfer ROM to SDCARD or Internal Storage: CM13 ROM + gapps 6.0
3) TWRP > Wipe > Factory reset and flash CM13 ROM, and then Flash gapps 6.0 (flash cm13 and gapps in a single session)
4) Reboot.
However, since I have already installed in my Moto-T, the version 2.8.7 of TWRP ( http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3100879 ), I would like to know if is better and also you recommended me to install first ( using fastboot flash recovery) the cm-13.0-20160810-NIGHTLY-condor-recovery.img (instead of TWRP 2.8.7) ? :
CyanogenMod Recovery:
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor-recovery.img
And then the:
CyanogenMod Build
cm-13.0-20160810-NIGHTLY-condor.zip (322.76 MB)
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor.zip
And Finally - Flash gapps 6.0:
http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
https://www.androidfilehost.com/?fid=24533103863139560
One last question, since I know that the CM13 is not based in an official Motorola release, I would like to know what is working flawlessly, and what is not working with in the Moto-E if I use this CM13 ROM ?
Please excuse all the questions, but I will like to be fully sure of the method and the correct files, that I have to use to successfully flash my Moto-E to CM13, to avoid future problems.
Thanks again for all your help !!
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
ABSathe said:
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
Click to expand...
Click to collapse
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
ulises.rodriguez said:
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
Click to expand...
Click to collapse
All the sensors are working perfectly
And regarding gapps .. I have installed older package (which I downloaded in July) .. but the latest one will just work fine
And latest nightly of cm13 is working perfectly for me.. so go for it
Sent from my Nexus 5X using XDA Labs