Firmware - AT&T HTC One (M8)

Dies anyone have the 4.4.4 firmware because I have the ruu and I want to get back to stock to see the update

MexicanSamurai said:
Dies anyone have the 4.4.4 firmware because I have the ruu and I want to get back to stock to see the update
Click to expand...
Click to collapse
Unless you are trying to convert from GPE back to Sense, you don't need the firmware separately. All firmware is included in the RUU. Relock the bootloader (if s-on) and run the 4.4.4 RUU.
Once you RUU to 4.4.4, you won't need to update OTA 4.4.4. Unless you are talking about getting future OTA updates (its not clear from what you posted, "the update" is non-specific and to me implies the current OTA).

redpoint73 said:
Unless you are trying to convert from GPE back to Sense, you don't need the firmware separately. All firmware is included in the RUU. Relock the bootloader (if s-on) and run the 4.4.4 RUU.
Once you RUU to 4.4.4, you won't need to update OTA 4.4.4. Unless you are talking about getting future OTA updates (its not clear from what you posted, "the update" is non-specific and to me implies the current OTA).
Click to expand...
Click to collapse
I am trying to get back to sense from GPE

MexicanSamurai said:
I am trying to get back to sense from GPE
Click to expand...
Click to collapse
That's pretty critical information left out of your OP. When asking for help, always give all the facts, and as much detail as possible. One run-on sentence isn't going to do it; and will just result in us asking you questions in order to clarif, and wasting both our time. Try to make it easy for others to help you.
I don't know if anyone has stripped out the 3.48 firmware yet. But Wonders_Never_Cease has the 3.28 Dev Ed firmware posted in his ROM thread in the Development section. That might do the trick.

Related

Difference between RUU and AOSP?

What are the differences between RUU and AOSP ROMs?
Am I correct that a RUU rom is a fully stock rom that some devs post with or without root? Like basically the latest version of non OTA for your device?
I feel like this is something basic that I should know but just haven't come across it.
Jesushaxyou said:
What are the differences between RUU and AOSP ROMs?
Am I correct that a RUU rom is a fully stock rom that some devs post with or without root? Like basically the latest version of non OTA for your device?
I feel like this is something basic that I should know but just haven't come across it.
Click to expand...
Click to collapse
You are correct mostly. The RUU is the factory stock image. It doesn't have to be the lastest version either. For instance when some phones upgraded to gingerbread they weren't able to be rooted, so you could use the froyo RUU to downgrade and root. An RUU will not be a root version, but a rooted stock ROM can be made from the RUU.
Jesushaxyou said:
What are the differences between RUU and AOSP ROMs?
Am I correct that a RUU rom is a fully stock rom that some devs post with or without root? Like basically the latest version of non OTA for your device?
I feel like this is something basic that I should know but just haven't come across it.
Click to expand...
Click to collapse
Go here it will tell you everything you want to know.... http://forum.xda-developers.com/showthread.php?t=1466228
Ok. So a RUU is only brought out from HTC? Or is any OEM stock OS a RUU?
I've always just called it the sbf file because that what I use them for lol.
EDIT: I'm also not a complete noob. Just sound like one here lol. Don't judge me too much on this. =)
Yes the RUU is HTC only. It is how the stock firmware is packaged for HTC devices.
Well that explains why I haven't come across it lol. I've dealt with Motorola through all of my android adventures.
Thanks a lot guys!

Stuck at HTC boot splash

I can get back into recovery but ever since I've attempted to flash a costum rom such as Viper or Revolution it gets stuck in the splash screen.
I'm not sure whats going on but I can boot into AOKP. If someone can help me out with the appropriate steps to take to flash one of those roms OR to flash back to stock I'd really appreciate because I've been at this for a couple of hours now and my head is starting to hurt :/
You need to update your firmware to run a Sense 2.22 based ROM: http://forum.xda-developers.com/showpost.php?p=54408500&postcount=9592
From the linked post:
The issues you will see without the new firmware include long boot times with no boot animations and some users on 9.1 reported wifi and bluetooth issues.
redpoint73 said:
You need to update your firmware to run a Sense 2.22 based ROM: http://forum.xda-developers.com/showpost.php?p=54408500&postcount=9592
From the linked post:
The issues you will see without the new firmware include long boot times with no boot animations and some users on 9.1 reported wifi and bluetooth issues.
Click to expand...
Click to collapse
I see you helping a lot people here redpoint so first of all thanks.
I just used the RUU.exe to return to at&t stock software number 1.58.502.1
I've read exactly what you said about being on Sense 2.22 but that's where I'm not sure what to do since AT&T hasn't release 4.4.3 yet and theres nothing for me to update to.
Do I have to S-off to obtain Sense 2.22? And also how difficult is it to S-ON? Again thanks so much.
afrojoc said:
I just used the RUU.exe to return to at&t stock software number 1.58.502.1
Click to expand...
Click to collapse
Kind of did things the hard way, although you are back up and running. Now you will need to unlock the bootloader and install custom recovery again, to get back to where you were.
All you really needed to do was either restore your nandroid (you should always make one before flashing anything) or get a different ROM (Sense 1.xxx base) onto the phone and flash it.
Also, the phone was likely not really "stuck", just taking a REALLY LONG time to boot, like 10 minutes.
afrojoc said:
I've read exactly what you said about being on Sense 2.22 but that's where I'm not sure what to do since AT&T hasn't release 4.4.3 yet and theres nothing for me to update to.
Click to expand...
Click to collapse
The post I linked previously includes the specific firmware package for US users, and a link to detailed instructions. 2.22.1540 is what you want to use, its pulled from the US Dev Edition OTA. While its not the "official AT&T" firmware, the DE is identical to the AT&T version in everything except AT&T branding (band support, etc.) and designed specifically for use on AT&T. Users here (including myself) can confirm it works seamlessly on the AT&T version.
2.22.1540 is also specifically advocated for use on the AT&T version in the following ROM post, along with great instruction (this is personally the one I used). Although you have to download the whole ROM, as the firmware is packed with it:
http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
afrojoc said:
Do I have to S-off to obtain Sense 2.22?
Click to expand...
Click to collapse
To update the firmware as I've described, yes. Reason being, the partitions that need to be updated by the firmware (radio, hboot, etc.) can't be modified without either S-off, or "official" update meant for your version.
The other option is to remain S-on and wait until AT&T releases the OTA. But who knows when that will be . . .
afrojoc said:
And also how difficult is it to S-ON?
Click to expand...
Click to collapse
S-on isn't really necessary. As long as you understand the implications of s-off, its usually better to be s-off. More freedom, and more options to recover if you have issues.
Also, AT&T doesn't care about s-off in terms of warranty service. They only care about physical damage or water damage.
afrojoc said:
Again thanks so much. I see you helping a lot people here redpoint so first of all thanks
Click to expand...
Click to collapse
No problem at all. I've benefited a lot from XDA, and its my way of contributing.

Need Help flashing 4.4.4 To AT&T HTC One M8.

I have an HTC One M8 AT&T Branded but it has 4.4.2 on it and i wanna flash viperrom 3.2.1 but it requires androids 4.4.4 software. im S-ON, 3.16 Bootloader with 1.58.502.1 Software number. Baseband Version is 1.16.21331931.LA11G_20.31A.4145.02L. im just looking to Update from 4.4.2 to 4.4.4 but i cant seem to find out how. Any help would be great.
Perfect.
Unlock your bootlooader if you haven't already, fastboot flash recovery (TWRP/PHILZ),root using the chosen custom recovery,make a backup before or after root.
Go here http://theroot.ninja/ for Sunshine
S-OFF cause that's what your going to need to update as far as 4.4.4
Orrrr just wait a few days for the ATT 4.4.4 build to be released (ETA 29th) and then youll have 4.4.4 without having to do anything.
Wonders_Never_Cease said:
Orrrr just wait a few days for the ATT 4.4.4 build to be released (ETA 29th) and then youll have 4.4.4 without having to do anything.
Click to expand...
Click to collapse
That's a better idea for sure.
I haven't noticed if Sunshine has an update that works with 4.4.4 yet.
Are you S-OFF ?
What are the advantages/disadvantages of S-OFF so the OP knows what he might be missing.
Do you know when the Sunshine update will be?
Yup,no [email protected],[email protected],there are plenty of posts about advantages and disadvantages...my point of view is simple,it is not needed for the novice,ive seen too many mess things due to lack of knowledge. My usage of it is for switching between att and developer ROM's to get latest updates. Outside of that I dont mess with conversions,to risky for a 6-700 device. My advice is stick to htc dev unlocked bootloader and wait for official update.
jball said:
That's a better idea for sure.
I haven't noticed if Sunshine has an update that works with 4.4.4 yet.
Are you S-OFF ?
What are the advantages/disadvantages of S-OFF so the OP knows what he might be missing.
Do you know when the Sunshine update will be?
Click to expand...
Click to collapse
Wonders_Never_Cease said:
Yup,no [email protected],[email protected],there are plenty of posts about advantages and disadvantages...my point of view is simple,it is not needed for the novice,ive seen too many mess things due to lack of knowledge. My usage of it is for switching between att and developer ROM's to get latest updates. Outside of that I dont mess with conversions,to risky for a 6-700 device. My advice is stick to htc dev unlocked bootloader and wait for official update.
Click to expand...
Click to collapse
Cool thank you
Im not S-OFF but hell ill wait for the 29th to roll around and see if i have an update. Can you link me to the info stating its around the 29th?
darkninja908 said:
Im not S-OFF but hell ill wait for the 29th to roll around and see if i have an update. Can you link me to the info stating its around the 29th?
Click to expand...
Click to collapse
I didn't Google for to long but I haven't found concrete links that state the exact date .how many times have we been promised a date and watch it pass by anyways.
May I ask if you've modified any other device before this one?
I'm not trying to push,but S-OFF might be in your future and will not halt an OTA from installing.
The version your on is easily exploitable using "Sunshine" unless you take the soon to be 4.4.4 update.
Nobody knows when Sunshine will have an update even with the team working on it as we speak.
Wont be much on Google @date,came from somewhere else. And nothing is ever "concrete" with software,especially with carrier branded software.
jball said:
I didn't Google for to long but I haven't found concrete links that state the exact date .how many times have we been promised a date and watch it pass by anyways.
May I ask if you've modified any other device before this one?
I'm not trying to push,but S-OFF might be in your future and will not halt an OTA from installing.
The version your on is easily exploitable using "Sunshine" unless you take the soon to be 4.4.4 update.
Nobody knows when Sunshine will have an update even with the team working on it as we speak.
Click to expand...
Click to collapse
jball said:
I didn't Google for to long but I haven't found concrete links that state the exact date .how many times have we been promised a date and watch it pass by anyways.
May I ask if you've modified any other device before this one?
I'm not trying to push,but S-OFF might be in your future and will not halt an OTA from installing.
The version your on is easily exploitable using "Sunshine" unless you take the soon to be 4.4.4 update.
Nobody knows when Sunshine will have an update even with the team working on it as we speak.
Click to expand...
Click to collapse
I have Rooted, and flashed multiple ROMS to my old M7 before. Nothing crazy.
I as well have the same build, unlocked bootloader, flashed custom recovery. Will I have to return to stock recovery using 1.58.502.1 RUU and to get the OTA update to 4.4.4??
I'm trying to get the latest Android Revolution ROM for 4.4.4 but realized I was in a bit of a pickle. I'd like to take the path of least resistance on this one - any advice would be super appreciated. Thanks!
pmoser16 said:
I as well have the same build, unlocked bootloader, flashed custom recovery. Will I have to return to stock recovery using 1.58.502.1 RUU and to get the OTA update to 4.4.4??
I'm trying to get the latest Android Revolution ROM for 4.4.4 but realized I was in a bit of a pickle. I'd like to take the path of least resistance on this one - any advice would be super appreciated. Thanks!
Click to expand...
Click to collapse
I'd say wait till tomorrow to see if an OTA update will roll out.
Or if you just can't wait for the ability to flash what you desire than I would go S-OFF and flash a non At&t firmware that you need to allow a smooth function of mentioned ROM.
Im restoring back to default AT&T ROM and such and will post weather the update has been pushed or not. i sure hope it has
**Update** Still no update, i got the " Current Software is up to date, You may check again in 23 Hours 59 Mintues.
darkninja908 said:
Im restoring back to default AT&T ROM and such and will post weather the update has been pushed or not. i sure hope it has
**Update** Still no update, i got the " Current Software is up to date, You may check again in 23 Hours 59 Mintues.
Click to expand...
Click to collapse
You can check as many times as you like by setting your time manually ahead and your phone/device won't know the difference.
Check as many times as you like but it will remain the same,you should get a notification when it's time
So if you don't have s-off you can't update to 4.44 Sense ROMS with AT&T? I'm on Slim Rom and sound quality stinks. I want the new Android Revolution but i've read wi-fi and such doesn't work. Clarification plz?
war eagle said:
So if you don't have s-off you can't update to 4.44 Sense ROMS with AT&T? I'm on Slim Rom and sound quality stinks. I want the new Android Revolution but i've read wi-fi and such doesn't work. Clarification plz?
Click to expand...
Click to collapse
Correct .
S-OFF allows you to change your CID witch will allow you to ruu Dev Edition 4.4.4 so everything runs smoothly
I've not looked on this thread in a while. I am S-off and unlocked and my cid is 11111111 but I have never updated firmware so that I can run a 4.4.4 rom. Is it correct that I flash a RUU (guess it's not called flashing when it comes to a RUU). How do I know which RUU to post - I found this one here: http://forum.xda-developers.com/showthread.php?t=2757462 (http://dl3.htc.com/application/RUU_...G_20.31A.4145.02L_release_368350_signed_2.exe)
Will I loose root or anything (other than wiping my data) when running the ruu.
jball said:
Correct .
S-OFF allows you to change your CID witch will allow you to ruu Dev Edition 4.4.4 so everything runs smoothly
Click to expand...
Click to collapse
karatche said:
I've not looked on this thread in a while. I am S-off and unlocked and my cid is 11111111 but I have never updated firmware so that I can run a 4.4.4 rom. Is it correct that I flash a RUU (guess it's not called flashing when it comes to a RUU). How do I know which RUU to post - I found this one here: http://forum.xda-developers.com/showthread.php?t=2757462 (http://dl3.htc.com/application/RUU_...G_20.31A.4145.02L_release_368350_signed_2.exe)
Will I loose root or anything (other than wiping my data) when running the ruu.
Click to expand...
Click to collapse
I'll just say that if it's a stock ruu than it's most likely without root and it will wipe as if it came out of the box.if its a full ruu than it will come with the updated firmware as well witch should allow you to flash 4.4.4 Roms and still run smoothly.
What I did around 5:00am this morning was restore my Dev edition backup I had along with the stock recovery so I could take the Dev edition lollipop official update and now I have lollipop firmware to use with my stock GPE 5.0.1 lollipop ROM/backup .
Sweetness
karatche said:
I've not looked on this thread in a while. I am S-off and unlocked and my cid is 11111111 but I have never updated firmware so that I can run a 4.4.4 rom. Is it correct that I flash a RUU (guess it's not called flashing when it comes to a RUU). How do I know which RUU to post - I found this one here: http://forum.xda-developers.com/showthread.php?t=2757462 (http://dl3.htc.com/application/RUU_...G_20.31A.4145.02L_release_368350_signed_2.exe)
Will I loose root or anything (other than wiping my data) when running the ruu.
Click to expand...
Click to collapse
Yes, running/flashing the 4.4.4 Dev Edition RUU will update you to that appropriate firmware. But, what you linked is not Dev Edition, its a stock AT&T RUU. And its not 4.4.4 either, its 4.4.2, which is probably where you already are.
What you want is the 3.28.1540 RUU linked here: http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
RUU will wipe the phone, install stock ROM (meaning root will be lost) and stock recovery.
But I also think its overkill to run an RUU just to update firmware, if that is the intent. My suggestion is to just run the firmware linked in the following post (which also has great instructions for doing so): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
The above method shouldn't overwrite the current ROM and user data. But backup anything important before flashing firmware, just in case.
Side note, "flash" is a fairly generic term, and as the RUU flashes stock ROM among other things, the term "flash" is appropriate IMO.
So can I just load the firmware file and flash thru fastboot? Is it This one?
3.28.1540.5 Firmware only unmodified (Latest 4.4.4 Update,S-OFF REQUIRED)
http://goo.gl/tyhRRZ
redpoint73 said:
Yes, running/flashing the 4.4.4 Dev Edition RUU will update you to that appropriate firmware. But, what you linked is not Dev Edition, its a stock AT&T RUU. And its not 4.4.4 either, its 4.4.2, which is probably where you already are.
What you want is the 3.28.1540 RUU linked here: http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
RUU will wipe the phone, install stock ROM (meaning root will be lost) and stock recovery.
But I also think its overkill to run an RUU just to update firmware, if that is the intent. My suggestion is to just run the firmware linked in the following post (which also has great instructions for doing so): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
The above method shouldn't overwrite the current ROM and user data. But backup anything important before flashing firmware, just in case.
Side note, "flash" is a fairly generic term, and as the RUU flashes stock ROM among other things, the term "flash" is appropriate IMO.
Click to expand...
Click to collapse

Help - Looking for Some Direction - Updating Firmware, s-off needed?

Hi everyone, I'm Josh and I'm a long time reader of XDA. I'm really struggling with the next steps on my HTC one despite reading ton's of information on XDA and many other sources. I could use some help / clarification.
I recently purchased an HTC One m7 ATT version. I've rooted, installed SuperSU, TWRP and unlocked the phone. I was stuck on choosing a rom but I've hit a new snag. I was going to try ViperOne but noticed they insist you install the latest firmware updates first. Here's where I'm lost. I'm running the stock version that came with my phone when it was locked.
Kitkat 4.4.2, Sense 6
FW# - 5.12.502.2
Hboot - 1.57
Radio - 4m.27.3218.14
I can't seem to get the OTA's, how do you get OTA's, do you have to run official att service sim like gophone? Or can you use straight talk like I currently have? Or do you not even need a sim for OTA's? I don't currently have a sim in the phone, was waiting to get all this sorted first. Will OTA's break root? Would it be beneficial to turn the phone into international version to get OTA's faster and would I lost the 4g lte abilities of phone if I did this?
How do I go about putting these firmware updates on, is s-off required even if you use a signed RUU from "androidruu dot com" for example?
I would like to get the latest official firmware releases on the phone and get it updated to kitkat 4.4.4 from the official releases and then put a custom rom on of my choice.
Is any of this even necessary? Are firmware updates included with the Rom's? How is an RUU different than a rom?
Someone, if possible please help me get this all sorted out, I'm so confused, it would be very much appreciated. Thanks!
jpcreativeimagery said:
I recently purchased an HTC One m7 ATT version. I've rooted, installed SuperSU, TWRP and unlocked the phone. I was stuck on choosing a rom but I've hit a new snag. I was going to try ViperOne but noticed they insist you install the latest firmware updates first. Here's where I'm lost. I'm running the stock version that came with my phone when it was locked.
Kitkat 4.4.2, Sense 6
FW# - 5.12.502.2
Hboot - 1.57
Radio - 4m.27.3218.14
I can't seem to get the OTA's, how do you get OTA's, do you have to run official att service sim like gophone? Or can you use straight talk like I currently have? Or do you not even need a sim for OTA's? I don't currently have a sim in the phone, was waiting to get all this sorted first. Will OTA's break root? Would it be beneficial to turn the phone into international version to get OTA's faster and would I lost the 4g lte abilities of phone if I did this?
Click to expand...
Click to collapse
You wont get OTA's unless you are stock, you can use this to get back to stock: http://forum.xda-developers.com/showthread.php?t=2775650 to be able to receive OTA updates.
jpcreativeimagery said:
Are firmware updates included with the Rom's? How is an RUU different than a rom?
Click to expand...
Click to collapse
No firmwares are never included in ROMs, and RUU reset your phone (both firmware and ROM) to fully stock, but you would need an RUU with same or higher version that you are on now. (with S-ON)
what is latest att firmware
@clsA, nkk71 and I have been talking on the #AndroidRevolution irc channel, we/I am trying to get this resolved to figure out if I need s-off in order to grab latest firmware's before I apply a custom rom because it seems att is way behind everyone else since the rest seem to be 6.0.something. Can you confirm what latest att firmware # is for htc one via their software update on the phone? I have reset phone to stock but it's still stuck on 5.12.xxx.xx (whatever the # is, don't remember right now) and claiming it's up-to-date, trying to figure out if boot-loader also has to be locked in addition to stock rom and stock recovery and root removed (cause I did all that but left bootloader unlocked), I've been reading that it does, but neither of us can confirm this. And do you need official att sim/service to do the updates? Additionally, could you direct to a list of signed firmware updates for flashing with s-on if this is not the latest firmware. Thanks!
clsA, just fyi, he used your Guru Reset ROM 5.12.502.2
but doesnt get any OTA updates
I tried it, but since i'm not on ATT, it doesnt even accept my device
nkk71 said:
clsA, just fyi, he used your Guru Reset ROM 5.12.502.2
but doesnt get any OTA updates
I tried it, but since i'm not on ATT, it doesnt even accept my device
Click to expand...
Click to collapse
@jpcreativeimagery
Well that may be because their have been no updates since that release
http://www.htc.com/us/support/htc-one-att/news/
clsA said:
@jpcreativeimagery
Well that may be because their have been no updates since that release
http://www.htc.com/us/support/htc-one-att/news/
Click to expand...
Click to collapse
aha :laugh:
quick question though.... seems ATT has it's own software update "solution"? flashed your Guru Reset ROM, and gave me "Device not provisioned" (or something like that), and the system update is not the usual htc system updated... weirdish (well, at least for me)
thanks bud
nkk71 said:
aha :laugh:
quick question though.... seems ATT has it's own software update "solution"? flashed your Guru Reset ROM, and gave me "Device not provisioned" (or something like that), and the system update is not the usual htc system updated... weirdish (well, at least for me)
thanks bud
Click to expand...
Click to collapse
Yes they do and you have to be on their network to even download the update on Wifi
clsA said:
Yes they do and you have to be on their network to even download the update on Wifi
Click to expand...
Click to collapse
nasty
nkk71 said:
nasty
Click to expand...
Click to collapse
Well their are enough working RUU + OTApkg.zip you don't really miss much
latest firmware
clsA said:
Well their are enough working RUU + OTApkg.zip you don't really miss much
Click to expand...
Click to collapse
@clsA, do you know of thread that list the latest firmware updates for flashing to an ATT M7_UL with s-off? I'm going to s-off the phone and bite the bullet with sunshine so i can take advantage of the latest firmware with a custom rom since ATT is so slow/behind with the software/firmware updates.
Thanks again for all your help and let me know.
jpcreativeimagery said:
@clsA, do you know of thread that list the latest firmware updates for flashing to an ATT M7_UL with s-off? I'm going to s-off the phone and bite the bullet with sunshine so i can take advantage of the latest firmware with a custom rom since ATT is so slow/behind with the software/firmware updates.
Thanks again for all your help and let me know.
Click to expand...
Click to collapse
Sure ... I recommend converting to the Developers edition for the most updates
after your s-off Change your CID fastboot oem writecid BS_US001
then flash this RUU >> http://www.androidruu.com/getdownlo...8_10.38r.1157.04L_release_353887_signed_3.exe
And then you can take OTA updates up to the current 6.07.1540.2 (3 updates I think)
I'm uploading the file's I used Here >> https://www.androidfilehost.com/?w=files&flid=24178
Their is also a RUU now from HTC >> http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
bricked / boot hang / fixed with reset
clsA said:
Sure ... I recommend converting to the Developers edition for the most updates
after your s-off Change your CID fastboot oem writecid BS_US001
then flash this RUU >>
And then you can take OTA updates up to the current 6.07.1540.2 (3 updates I think)
I'm uploading the file's I used Here >>
Click to expand...
Click to collapse
@clsA, thank you so much for that, I actually ended up following @vomer 's guide and turning it into super CID because it seemed that the firmware updates were newer than the developer ones oddly enough, 6.0.9 and 6.0.9.xxx.10 and then there's 6.0.9.xxx.11 and .12 but this is where i hit a snag, all went smoothly using vomers firmwares up till 6.0.9.xxx.10 but then i tried to flash the .11 and .12 from ARHD and the device bricked/ hangs on boot....ended up having to use adb push to get your reset on there and reset the device, flash the original firmware etc...phone is working again (I was tempted to panic but maintained control ;P) but ultimately means i wasted a bunch of time only to have start over again....for now I've left it 5.12 and stock....maybe you could help figure out what went wrong when you get a chance.
Thanks.!
i left recovery and root on during the reset just in case it didn't work but did flash back the stock radio for that rom as well
jpcreativeimagery said:
i left recovery and root on during the reset just in case it didn't work but did flash back the stock radio for that rom as well
Click to expand...
Click to collapse
Theirs nothing wrong with the Stock 5.12.502 firmware from AT&T in fact it's one of the most stable. You can flash mostly any rom you want with that firmware installed. The reason I recommend the Developer edition right now is because Lollipop+Sense is due out any day now on that model.
how to proceed
clsA said:
Theirs nothing wrong with the Stock 5.12.502 firmware from AT&T in fact it's one of the most stable. You can flash mostly any rom you want with that firmware installed. The reason I recommend the Developer edition right now is because Lollipop+Sense is due out any day now on that model.
Click to expand...
Click to collapse
@clsA, I was bent on the firmware update to take advantage of latest enhancements with ARHD and they recommended at least v6 xxx .11 eventhough the rom is based on v6 xxx.12, viperone also strongly advised latest firmware updates....does the developer versions you sent me have the calling fix for when the audio in the call was lost because of google update? Also, quick question, why did you include the 4 xxx something base firmware...i can just proceed with the CID change and start at the 6 series firmwares because I'm already at later version with att stock 5.12 right?
Any idea what happened the other night with the bricking - would boot, hang on black screen after first htc logo on white background and then just have the hardware touch buttons lit....was it because the firmwares ARHD posted required the bootloader to be re-locked? (failed to notice this until after I had semi-bricked it)
Also, what backup app would you recommend? looking to restore all my apps and settings after these wipes etc...getting tired of redoing it all again each time.
Thanks!
jpcreativeimagery said:
@clsA, I was bent on the firmware update to take advantage of latest enhancements with ARHD and they recommended at least v6 xxx .11 eventhough the rom is based on v6 xxx.12, viperone also strongly advised latest firmware updates....does the developer versions you sent me have the calling fix for when the audio in the call was lost because of google update? Also, quick question, why did you include the 4 xxx something base firmware...i can just proceed with the CID change and start at the 6 series firmwares because I'm already at later version with att stock 5.12 right?
Any idea what happened the other night with the bricking - would boot, hang on black screen after first htc logo on white background and then just have the hardware touch buttons lit....was it because the firmwares ARHD posted required the bootloader to be re-locked? (failed to notice this until after I had semi-bricked it)
Also, what backup app would you recommend? looking to restore all my apps and settings after these wipes etc...getting tired of redoing it all again each time.
Thanks!
Click to expand...
Click to collapse
The Developers Edition 4.x RUU is the last RUU .. then it's 3 updates and your at the current version and ready for the Lollipop update
The ARHD International firmware needs the MID changed to work, You can eather edit the android_info.txt or change you MID to make them work
clsA said:
The Developers Edition 4.x RUU is the last RUU .. then it's 3 updates and your at the current version and ready for the Lollipop update
The ARHD International firmware needs the MID changed to work, You can either edit the android_info.txt or change you MID to make them work
Click to expand...
Click to collapse
@clsA, hmm, did not see that anywhere in the post...def. did not change MID...but they did specify needing locked bootloader, any idea why? will either of those cause the boot problem I described? Or can the firmware after 6.xxx.10 be incompatible with the att stock rom and i actually needed to flash a rom before proceeding?
When you said earlier "And then you can take OTA updates up to the current 6.07.1540.2 (3 updates I think)" you mean flash them or can take them via the OTA update service....in the dev edition does the built in OTA update service work with unlock and root?
what version does .401 mean, is that international? I know the .1540 designates developer edition.
What backup for settings and apps would you recommend, would titanium suffice?
Thanks again for all the help.
jpcreativeimagery said:
@clsA, hmm, did not see that anywhere in the post...def. did not change MID...but they did specify needing locked bootloader, any idea why? will either of those cause the boot problem I described? Or can the firmware after 6.xxx.10 be incompatible with the att stock rom and i actually needed to flash a rom before proceeding?
When you said earlier "And then you can take OTA updates up to the current 6.07.1540.2 (3 updates I think)" you mean flash them or can take them via the OTA update service....in the dev edition does the built in OTA update service work with unlock and root?
what version does .401 mean, is that international? I know the .1540 designates developer edition.
What backup for settings and apps would you recommend, would titanium suffice?
Thanks again for all the help.
Click to expand...
Click to collapse
Lollipop is coming in the next few days. Just go back to post #11 and flash the RUU and the OTA updates
I gave you the link to all the file's I used. Your S-off no need to lock the bootloader and you flash the OTA updates from stock recovery yourself
just download them all to your phone sdcard and flash them in order.
I use HTC Backup is all I need. And google keeps my contacts and calender
clsA said:
Lollipop is coming in the next few days. Just go back to post #11 and flash the RUU and the OTA updates
I gave you the link to all the file's I used. Your S-off no need to lock the bootloader and you flash the OTA updates from stock recovery yourself
just download them all to your phone sdcard and flash them in order.
I use HTC Backup is all I need. And google keeps my contacts and calender
Click to expand...
Click to collapse
@clsA: What bout with:
** Tampered **
** unlocked **
M7_UL PVT SHIP S-OFF RH
HBOOT-1.56.0000
RaDIO-4T.24.3218.09
OpenDSP-v32.120.274.0909
OS-4.18.502.7
eMMC-boot 2048MB
Jan 28 2014, 09.32.41.0
Should I follow the same procedure? I want to try out the GPE Lollipop. Just wondering which firmware I should flash?
fc3211 said:
@clsA: What bout with:
** Tampered **
** unlocked **
M7_UL PVT SHIP S-OFF RH
HBOOT-1.56.0000
RaDIO-4T.24.3218.09
OpenDSP-v32.120.274.0909
OS-4.18.502.7
eMMC-boot 2048MB
Jan 28 2014, 09.32.41.0
Should I follow the same procedure? I want to try out the GPE Lollipop. Just wondering which firmware I should flash?
Click to expand...
Click to collapse
Depends on what you mean "Try Out " ? you aether convert to Full GPe or you flash a rom.
If you convert, you simple change your CID and flash the RUU.
If you want to just see if it's for you, flash the rom .. I like this one >> http://forum.xda-developers.com/htc-one/development/rom-google-play-edition-lollipop-v1-00-t2963927
But it does require the latest firmware so yes post #11 would get you to the newest firmware

[Q] Currently on Sky Dragon KitKat [GPE], how to update to Lollipop?

Currently installed is SkyDragon. How can I update the phone to a GPE Lollipop ROM? I have S-ON.
catzilla said:
Currently installed is SkyDragon. How can I update the phone to a GPE Lollipop ROM? I have S-ON.
Click to expand...
Click to collapse
There is no official lollipop for AT&T yet, but wonders_never_cease has a dev edition ROM modified for at&t, all the directions to flash it are in the thread, I recommend trying it, very fast with no bugs ?
catzilla said:
Currently installed is SkyDragon. How can I update the phone to a GPE Lollipop ROM? I have S-ON.
Click to expand...
Click to collapse
just flash skydragons lollipop gpe
rbouza1 said:
just flash skydragons lollipop gpe
Click to expand...
Click to collapse
If the OP hasn't updated to 4.4.4 firmware by OTA (and can't do it manually with s-on) broken WiFi may be the result after flashing SD LP.
4.4.4 is reportedly started to roll out today for AT&T (which will update the firmware).
redpoint73 said:
If the OP hasn't updated to 4.4.4 firmware by OTA (and can't do it manually with s-on) broken WiFi may be the result after flashing SD LP.
4.4.4 is reportedly started to roll out today for AT&T (which will update the firmware).
Click to expand...
Click to collapse
How can I update to AT&T's 4.4.4 without unlocking S-On? Is that possible?
I think I read something around here that says that going back from a GPE rom to a carrier rom is impossible unless s-off.
Can you please confirm?
Really, I have absolutely zero need in AT&T's 4.4.4 if there is any way I could jump straight to SkyDragon 5.0 GPE, without screwing up connectivity.
Another thing is, I have an update notification waiting for me (see pic). What will happen if I flash that? Will that completely screw up my phone, or will that get me to Google's stock Lollipop GPE?
catzilla said:
How can I update to AT&T's 4.4.4 without unlocking S-On? Is that possible?
Click to expand...
Click to collapse
Its certainly possible. Either return to stock ROM and stock recovery, and OTA to 4.4.4.
Or alternately, relock the bootloader and flash the 4.4.4 RUU (back any personal data before RUU, all internal storage will be wiped).
catzilla said:
I think I read something around here that says that going back from a GPE rom to a carrier rom is impossible unless s-off.
Can you please confirm?
Click to expand...
Click to collapse
That is incorrect. If you just flash a GPE based ROM, you can freely go back to Sense.
S-off is needed to fully convert to GPE (including GPE CID, bootloader, partitioning, etc.); or alternately, to fully convert a GPE version to Sense.
catzilla said:
Really, I have absolutely zero need in AT&T's 4.4.4 if there is any way I could jump straight to SkyDragon 5.0 GPE.
Click to expand...
Click to collapse
You don't need the ROM, but you absolutely do need the 4.4.4 firmware. If you don't have it, WiFi will be broken. You might also have extremely long boot times (10+ minutes).
And that is the only reason I'm suggesting the OTA, so you can update the firmware without having to s-off.
---------- Post added at 11:22 AM ---------- Previous post was at 11:18 AM ----------
catzilla said:
Another thing is, I have an update notification waiting for me (see pic). What will happen if I flash that? Will that completely screw up my phone, or will that get me to Google's stock Lollipop GPE?
Click to expand...
Click to collapse
With you current setup the OTA won't work:
1) You have to be on a stock ROM or the OTA will fail.
2) You have to be on corresponding stock recovery, or the OTA will not install (phone will loop booting TWRP looking for stock recovery and not finding it).
3) You need the GPE Carrier ID (CID) or OTA will fail. You can't change CID with s-on.
So what you are saying is, my best course of action would be to:
1) Flash stock 4.4.2 (is rooted version okay?)
2) Update to stock 4.4.4 via OTA (is there root available? how do I not lose it?)
3) Flash SkyDragon Lollipop
catzilla said:
So what you are saying is, my best course of action would be to:
1) Flash stock 4.4.2 (is rooted version okay?)
2) Update to stock 4.4.4 via OTA (is there root available? how do I not lose it?)
3) Flash SkyDragon Lollipop
Click to expand...
Click to collapse
1) Rooted is okay, as long as no system files have been altered (which should be the case if its called "stock"). You also need stock recovery.
2) You will lose root. Simply root again. Flash TWRP, and flash SU or SuperSU. Or just boot TWRP, and it will probably ask you if you want to root.
3) Yes.
Alternately, since the 4.4.4 RUU is now available:
- backup any personal data
- Relock bootloader
- RUU
- Re-unlock bootloader and install TWRP
- Flash Skydragon
I can't say RUU methos is necessarily any better or easier. Just another option, really. But it might take the footwork out of finding the right stock ROM and stock recovery combo, and restore the phone to "stock" in one fell swoop.
One last question, and I feel sad for asking this because I really should be able to find it myself: where can I find this mythical 4.4.4 AT&T RUU? I've looked all over the forum but I just don't see it.
Edit: I think I got it. Is this it? http://dl3.htc.com/application/RUU_...40.34.C35006.02_F_release_407726_signed_2.exe
Relocked, ran RUU, unlocked, flashed recovery, flashed rom, currently patiently waiting for it to boot.
I think this is going to work, thanks for all your help! =)

Categories

Resources