I am looking for any help or information on rooting visual land prestige elite 10q please help
Me too!!!
Root (& install SuperSu) AND install Xposed Framework w/o TWRP/CWM/a custom recovery
Visual Land Prestige Elite 10 QL
I have a Visual Land Prestige Elite 10QL tablet. I spend two days trying to root/get SuperSu to install/get a custom recovery so that I could install a ROM or Xposed Framework. I had a very hard time, but with A LOT of research... I found the below information.
Rooted with Kingroot
Added Super Su, but would not install properly. If you root with Kingroot and want to use Super Su as your superuser instead of Kingroot's, I found the fix. Install Super Sume , which will delete the Kingroot files (but will not unroot the phone) and will replace with the Super Su files.
Then get this!!! Because TWRP and CWM custom recoveries are not compatible with VL PE 10ql tablets, I could not use them to flash a custom ROM or install Xposed Framework.
But, I found a fix!
You CAN install Xposed Framework without TWRP/CWM custom recovery.
I did a Nandroid backup using Titanium Backup and saved to SD card, although it is brand new and I could just do a factory reset if it screwed up. I don't recommend going to the next step before doing a Nandroid backup. (google it)
Use FlashFire to flash Xposed Framework directly w/o custom recovery.
Download the latest derivative version of Xposed for Lollipop (Android 5.0 or 5.1) by romracer. You need two files, the Xposed installer apk and the Framework flashable zip. Read about it and get the files here: Xposed Files Please Read Their Q&A to make sure you get the correct files!
1. Install the Flashfire app
2. Open The FlashFire app, then grant superuser when requested.
3. Tap the plus (+) button at the bottom to show the menu.
4. Choose “Flash ZIP or OTA” menu, and keep the “Auto-mount” option unchecked then tap checkmark icon to continue.
5. Tap the EverRoot menu, and ensure every single options remains unchecked.
6. Leave the Reboot menu to normal to boot system after flash.
7. Just hit the "Flash" button to start the process.
8. You will get a blank screen, then display the contents of your system just before it start the flash procedure. Don't freak out! Your device will reboot and it may take awhile.
9. Find the Xposed Module Management APK file (download file or system files), open it, follow the directions
10. Start customizing by installing modules from the repository!
Thanks to Robbie S www.andromods.com for contributing much of directions for installation
Related
Double Tap Statusbar to Sleep
Purpose: Double tap statusbar anywhere to sleep device....
Code:
[B][COLOR="Blue"]WORKING ON KIT KAT, JELLY BEAN ROMS..should also work on GINGERBREAD ROM
but not tested on GINGERBREAD ROM so test on your own RISK![/COLOR][/B]
How to install:
First step for everything you do is Create a nandroid backup and make sure you know how to restore it!
I'm not responsible for anything you do with your phone/tablet etc.
There is also the risk to soft-brick your device. In such a case, restoring a backup is the easiest way to get rid of it..
STEP 1: (NOTE: IF YOU HAVE ALREADY INSTALLED XPOSED THEN LEAVE STEP 1)
For the framework:
1. Download the Xposed Installer APK Xposed Installer APK and install it..
2. Launch the Xposed Installer, go to the "Framework" section and click on "Install/Update"
*In case you get a Segmentation Fault error, please install this (not needed if the installation worked fine).
3. Reboot
4. Done!
- In case you get into a boot loop:
First, try using the safemode by pressing any hardware key repeatedly. You can find a short explanation how it works here.
If that doesn't work, you can flash the attached Xposed-Disabler-Recovery.zip by Tungstwenty. It will be copied to your (external) SD card when you install Xposed as well. The only thing it does is copying /system/bin/app_process.orig back to /system/bin/app_process, which you can also do yourself (e.g. with adb shell in recovery mode).
STEP 2 : AFTER XPOSED HAS BEEN INSTALLED SUCCESSFULLY -
1. Download This apk file. After downloading install it.
2. Launch the Xposed Installer and go to the "Modules" section (you will also get there if you click on the notification warning you that the module is not enabled yet).
3. Enable the module by checking the checkbox,
4. Reboot
5. Done!! :good:
- In case you get into a boot loop:
First, try using the safemode by pressing any hardware key repeatedly. You can find a short explanation how it works here.
If that doesn't work, you can flash the attached Xposed-Disabler-Recovery.zip by Tungstwenty. It will be copied to your (external) SD card when you install Xposed as well. The only thing it does is copying /system/bin/app_process.orig back to /system/bin/app_process, which you can also do yourself (e.g. with adb shell in recovery mode).
Extra links to download apk of step 2: GOOGLE DRIVE || MEDIA FIRE //try these if dropbox link doesn't works //
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* TESTED ON SLIM KAT 4.4.2 working!
Working on stock jb too!
please try and give feedback!
Thanks! work on stock jb 4.1.2.:good:
HatsuneMiku said:
Thanks! work on stock jb 4.1.2.:good:
Click to expand...
Click to collapse
:good:
Your comprehensive guide to rooting the NC5 and fixing it if/when something goes wrong
To start out I found it very time consuming to find the 'right' information on rooting the NC5 or that it wasn't possible. So I went on the mission to see if i get what was out in the wild to work.
Well I figured it out and I hope this helps!
Step One: Charge your phone! In the event we need to use Odin to fix a boot-loop/soft-brick.
Step Two: Check your version number. As the title suggests this method is only for Verizon Galaxy S4 NC5!
(ENABLE USB DEBUGGING AND UNKNOWN SOURCES IN SETTINGS BEFORE PROCEEDING)
Step Three: Time to download the tools we will need to get this done. Place these files on your SD card. This is the only time you will need your computer. CLICK IT> ONE STOP SHOP
Towel Root: Okay, this is version 1 of the app. I know there are newer versions but they don't work and this does so use it. Select and install. Open the app and select 'make it rain', your phone will reboot and base root has been achieved!
Super User: Select and install. Open the app and install the SU binary at the prompt. The app will also ask to disable KNOX, if you do the app might hang. Home button out and try again after a reboot. Eventually it will work though a bit funky at times.
Safe Strap: Select and install. Open the app and select 'install recovery'. After it installs reboot to the recovery by selecting 'reboot to recovery'. When the recovery loads select the backup option and make a backup!
This is our recovery and allows nandroid backups(you should have done this) and flashing of safestrap ROMs. The bootloader is locked on this phone so no flashing of CM11 or any custom kernels. Do some research before you start flashing things!
Well that was easy! Now you have a rooted and safestrapped NC5 S4!
FAQ\INFO
This recovery is BETA and does not support ROM slots. Everything must be done on the STOCK slot. MAKE A BACKUP!
Nandroid backup and restore is working completely with this recovery!
If you remove Samsung Hub auto rotation will break. Attached is the library file that fixes this. Extract libgnustl_shared.so from the attached zip. Copy and paste to System\Lib and change permission to rw-r--r--. I use Root Explorer, though not free is a very good file manager. There are free alternatives on Google Play.
CREDITS DUE!
HASHCODES< Safe Strap!
CHAINFIRE< Super SU!
GEOHOT< Towel Root!
Thank you for your work. But I have a few major points to address with this:
1. There is a newer, stable SAFESTRAP out (3.75), this one also supports ROM slots, and doesn't corrupt the Non-HLOS Partition.
2. Version 3 of TowelRoot is out, and alot more stable/clean than Version 1.
3. SAFESTRAP really should be installed after busybox is installed, which you did not recommend.
The Samsung Hub Auto Rotation bug is a very nice find though! Thank you for that.
Hey thank you! I will update accordingly.
However TowelRootv3 would not root my phone. I tried changing the strings, the app just states the phone isn't supported.
I found an xposed package customised for Nubia's running lollipop (5.0.x). with this you don't need to disable resource hooks and some UI customising apps will even work.
Open the rar, copy the installer apk to your sd card. Open the folder of your device, either z7 or z9. copy both the installer zip and the uninstaller zip to your sdcard root.
Restart in your custom recovery, install the zip (just the installer not the uninstaller obviously)
Once rebooted, install the apk.
Then you can enjoy xposed.
If you encounter issues, restart in recovery and install the uninstaller.
https://mega.co.nz/#!zY1TWC5T!6mOpFFxBQ49NJiSg5B8ytN2ixoRuXQ9pSP3L6pum5Bc
Do you mind re-up the link
Thanks
silent_eve said:
Do you mind re-up the link
Thanks
Click to expand...
Click to collapse
There are much newer versions since that post.. have a look at http://4pda.ru/forum/index.php?showtopic=684786 first post, expand the heading "Xposed framework v83" which is currently the latest.
I have been relentlessly trying to fix the drivers that couldn't install, even when I installed it. So I have finally found a fix tinkering with my system folder. I will be posting a guide + the fix so scroll down to the appropriate section! I understand that other people posted the guide but I wanted to share my own way of doing it
Pre requisite s:
Busy box
Root (non systemless because it didn't work for me on systemless)
={ GUIDE }=
1) Install Viper4Android either from other posts or from the download links below which is a flashable zip with a dark theme
2) Download SELinuxEnforcing from the download link below and install it, THERE WILL BE A WARNING FOR SOME THAY IT CAN HARM THE SYSTEM, PRESS READ MORE OR SIMILAR AND PRESS INSTALL ANYWAY. THE APP WAS JUST REMOVED FROM PLAY STORE AND THIS HAS NO HARM THAT IT CAN INFLICT!
3)Go to SELinuxEnforcing and accept root permission then press on the permissive button.
4) Download root browser from the Play Store created by JRummy.
5) Alright ready for the fun part, reboot into Recovery mode TWRP
Decrypt your device( if you have it encrypted)
6) Press install and locate to the area that this v4a zip is located ( mostly /sdcard/downloads)
6) Press and install the zip
Reboot into device
7) Go into viper4android and install the driver
8) Reboot and after if you DO not see any installed driver, move on to the FIX section!
_——_
Pre requisites[FIX] + pre installed by you :
Busybox[GUIDE]
Root[GUIDE]
SELinuxEnforcing[GUIDE]
Root Browser
={ FIX }=
Got Root? Anyway, looks like its still saying Driver not Installed even though you installed it.
1) Now there's a very easy fix. Given that you have root browser following on from the guide or sliding through to this section taking a look at the pre requisites, go into it.
2) You will now be welcomed with a lot of folders. Locate to
system then vendor then etc then you will see audio_effects.conf that is interrupting the drivers.
3) What you want to do now is to long press it, which will pop up with various options, press rename and change .conf to .bak which will disable the configuration script but keeping it backed up for if anything that goes wrong.
4) Reboot and voila! Your drivers should say neon activated and etc.
PRESS THANKS IF IT HELPED AND WORKED SO THAT OTHER PEOPLE CAN SEE ITS VALIDITY
Read here too. http://forum.xda-developers.com/showthread.php?t=2952137 I've been using Viper Atmos for a week or so now ever since the op made it work perfect with Nexus 6p.
Sent from San Antonio Tx- Nexus 6p
Hi guys after trying many apps and xposed module, I kinda found a way how we can save our internal space by saving OBB/DATA files of our games specially the one with large files Don't know if it works on Marshmallow because my unit or model J5007 has no marshmallow bootloader to use 6.0 roms and test this... but if someone is willing to try report here to let the others know I think even though u dont have Magisk, as long as you have root just download Xposed for nougat and find the original flashable zip (not for magisk) then follow the steps
Requirements:
-Magisk Latest v14
-Xposed installer or app for Magisk (main app)
-Xposed v88 SDK 25 (Nougat only) zip for Magisk (install zip)
-OBB ON SD module from Xposed
Steps:
1. Install Magisk v14 or latest from the official forum of it.
2. Install Xposed app for Magisk (main app), Open you will notice that you need to install Xposed
for android 5.1 and up the only way is to flash xposed to install it.
3. Flash Xposed v88 SDK 25 zip then reboot.
4. Open Xposed app (main app) then check if Xposed is installed. if not try flashin again.
5. On Xposed go to Modules then search for OBB ON SD then install and activate it's module.
6. Open OBB ON SD switch on the following: "Data on SD" and "Detect SD on Android 5/6" then others are optional.
7. Copy the OBB/DATA of your game on "sdcard/Android/obb or data" then reboot device and enjoy
Note: Can't post links because i didn't get the owner permission, you could just search them here in XDA
Hit Thanks to thank the developers of Magisk, Xposed, Module and if it helps
@Wood Man and this one...:cyclops:
MOD EDIT @JosephDM: moved!
Thanks! I'll try that soon.
Dont work
I did not get it, it says that the xposed framework is not installed.
Is whatsapp working on external storage through this method???