[4.2.2]FeraLab_Firmware-v1.0 - XPERIA X10 Android Development

Hello. Recently I recieved new xperia x10 and immediately started to cook sweet droid jellybeans for it from source.
This is first RAW build based on CMX10 sources with minor fixups.
Changelog:
Code:
*** v1 ***
- Sdcard daemon tune-up (R/W buffer tweak)
- Latest CM10.1.3 sources
- Removed chromium webview
- Disabled emulator build
- OMX video recording fix
- WiFi framework fix
- AR600 wpa_supplicant fix
- HWcomposer fix
- WiFi hostapd fix
- Unbloated
- Legacy SoftAP support
- O3 optimization
- Decreased debugging in system
Download zip..extract .ftf from it and flash using flashtool. then go to cwm.. make factory reset and flash zip.
Everything have to work fine.. please test and report.
Donwload HERE (kindly, don't make mirrors)
If you like this..feed me :good:
Peace out!

---

buddy this is great still after so much time our X10 is alive thanks to you
mate u did the inmpossible
in that honor if this build works i will make SOKP build for u guys and i will help fera make X10 run CM12
but still i am very suprised good work mate
glad we work together....
FIRST DEVELOPING SKILL GAINED BY WATCHING FERA WORK

---

Did it boot?

---

FeraVolt said:
Wusup guys. Me again. This time with some crazy thing - CM12 for x10. I don't have device on hands so I can't even tell you if it''s booting. Don't expect that anything will work on this build. Just be happy if it boots and provide logcat anyhow. I barely compiled this thing dealing with tonns of errors..starting over again and again..so this pre-alpha's main aim is - to boot. Please test and report.
Download here
no mirrors please..
Extract & flash .ftf from zip. then flash rom (if recovery is working ) but better flash rom first using CWM 6 then flash provided ftf..just in case nothing will work. make sure you will be able to restore your x10 from hell state UB only.
This is RAW build..mostly based on Tof's work..with 3.0.8 kernel.. (Thanks bud )
Finally..hit thanks button and feed me a juicy burger if this will boot :fingers-crossed: :good:
Peace out...
Click to expand...
Click to collapse
I will test and report you ASAP

---

flashed kernel. but cannot go to cwm. not even cwm lights.just showing feralab logo.

---

Wow Fera, you have excelled yourself here! I am so going to try this!!
Just tried flashing it and it only seems to flash the kernel (Flashtool flashes it really quickly, a couple of seconds, it would be much longer if it was the entire ROM flashing) Am I doing something wrong?

---

alex_ncfc said:
Wow Fera, you have excelled yourself here! I am so going to try this!!
Just tried flashing it and it only seems to flash the kernel (Flashtool flashes it really quickly, a couple of seconds, it would be much longer if it was the entire ROM flashing) Am I doing something wrong?
Click to expand...
Click to collapse
ok. cm12 kernel don't have recovery access..use any kernel with cwm6 to flash rom..then pull out battery and flash cm12 kernel to boot new rom.

---

Tried as you mentioned several times.
Downloaded rom file just provide ROM FILE WITHOUT ANY EXTENTION. just a file. When i rename it as zip, cwm says cannot open. When i rename as RAR, cwm cannot find file. Plz provide proper ROM.ZIP file if you can

---

reuploaded fixed zip and updated OP.

---

FeraVolt said:
reuploaded fixed zip and updated OP.
Click to expand...
Click to collapse
Hi Mate
I Hope this help's

---

doodownunda said:
Hi Mate
I Hope this help's
Click to expand...
Click to collapse
This is lovely..thanks... while installing cm12 x10 was simply out of space on system partiton... will delete some sht from .zip and reupload it...
EDIT:
http://ul.to/p8yjsnmt another try.

---

FeraVolt said:
This is lovely..thanks... while installing cm12 x10 was simply out of space on system partiton... will delete some sht from .zip and reupload it...
EDIT:
http://ul.to/p8yjsnmt another try.
Click to expand...
Click to collapse
Hi again Mate i keep getting error's trying to download.
It keeps redirecting to register and pay for download?
The free download is currently not available - Please try again later! Premium account users are not affected by this temporary limitation.
Ok I tried internet explore to download and it is now downloading. So it must of been my ad-blocker on chrome stopping it? It say's it will take approx 3 hour's. I'll try to reflash when it's finished.
Thank you

---

Tried to install this. Installed the rom first and then flashed the kernel. It gets stuck at the bootlogo. It doesn't spin like Kernel v27 does. I couldn't get logcat to connect to my phone so nog logs sadly
~Aeny

---

ROM and Kernel install without problems, however as above, the boot process hangs on the FeraLab logo. (waited over 10mins)
No dmesg available at this boot stage.

---

@FeraVolt maybe you should place /system on sd. Maybe you should check lx cm12 sources , they did the same. just an ext4 partition on sd must be made on user's side

---

TakisBeskos said:
@FeraVolt maybe you should place /system on sd. Maybe you should check lx cm12 sources , they did the same. just an ext4 partition on sd must be made on user's side
Click to expand...
Click to collapse
I don't have working x10 onhands and can't do amything more that this atm. I have an idea about system partition..dont worry... :good:

---

FeraVolt said:
I don't have working x10 onhands and can't do amything more that this atm. I have an idea about system partition..dont worry... :good:
Click to expand...
Click to collapse

---

Compiled cm10.1. Please test and report.

---

FeraVolt said:
Hello. Recently I recieved new xperia x10 and immediately started to cook sweet droid jellybeans for it from source.
This is first RAW build based on CMX10 sources with minor fixups.
Changelog:
Code:
*** v1 ***
- Sdcard daemon tune-up (R/W buffer tweak)
- Latest CM10.1.3 sources
- Removed chromium webview
- Disabled emulator build
- OMX video recording fix
- WiFi framework fix
- AR600 wpa_supplicant fix
- HWcomposer fix
- WiFi hostapd fix
- Unbloated
- Legacy SoftAP support
- O3 optimization
- Decreased debugging in system
Download zip..extract .ftf from it and flash using flashtool. then go to cwm.. make factory reset and flash zip.
Everything have to work fine.. please test and report.
Donwload HERE (kindly, don't make mirrors)
If you like this..feed me :good:
Peace out!
Click to expand...
Click to collapse
i installed rom by using gb kernel.Then i flashed jb kernel. rom booted. but when i move home screens, its always blur. cam worked,video record worked in law quality. ram usage is 192mb without any apps.i felt very slow and not much smooth when comparing with V40 gb. i couldn't take screenchots because there was no option. however happy with booting the rom.

---

tsyssampath said:
i installed rom by using gb kernel.Then i flashed jb kernel. rom booted. but when i move home screens, its always blur. cam worked,video record worked in law quality. ram usage is 192mb without any apps.i felt very slow and not much smooth when comparing with V40 gb. i couldn't take screenchots because there was no option. however happy with booting the rom.
Click to expand...
Click to collapse
Tried it today, if you install gapps the blur stops.
The rom is working quite well for what I was expecting.
It is a too laggy, process "com.android.phone" FC's and the notification bar freezes, you need to restart the phone. No reboots.
Wifi, bluetooth, gps, accelerometer, camera (8Mpx, video low), are all working.
This is a great first version of what could be a great rom for our old X10...
Thank you Fera!