htc surround
pd26110 ss-bc(4k)
spl-4.2.2250.0 (129185) MNG
touch c1(v59)
SD sandisk 15193mb
partition info-v211v413
keep restart on htc first white screen
try change memory card with another samsung 16gb sd card but still make restart
try flash :
RUU_Mondrian_Cingular_US_1.52.502.04_5.66.09.09_22.46.50_RELEASE
RUU_Mondrian_S_Cingular_US_4.03.502.00_5.69.09.05a_22.50.50_RELEASE
but the 2 files keep invalid vender id error 294
plz need compatible stock ruu rom to solve the problem​
i think this section dead long time ago
thx
Related
i got two o2 with hang on o2 splash screen and nogsm
blue light flickers
and device starts after 15min to 1hr with no network
i tried various roms but no sucesss ...
always ERROR 114
i read some wher that might me possible with SD CARD
I Downloade ROM.NB1 also ntrw
transfered rom image with ntrw utility
when i put my sd card in xda2 in boot mode nothing happens
i chacked card its shows not formatted
my both xda2 are have version 1.03 boot loader
i am totally confussed now as i had make life few xda2 o2 with imate rom and worked but with this two i am becoming crazy
error 114 means unable to erase radio rom :twisted:
how come??
looking for solution searched whole forum cant find
Thanks and regards
mobilemafia
no one have such problem before or no solution for this kinda fault
SD Card info
Hi MobileMafia,
Searching the forums turned up several topics on SD card upgrades, but here is one specifically for the XDA II.
Please note that doing an upgrade incorrectly with an SD card can lead to many more problems and you should take every care to do this correctly.
The topic can be found here, just be careful with what you do, if you don't understand ask in that topic.
M
i update my prophet to wm6 but after 5 min the memory card appear empty and doesn't operate well until i reapet insert it ???!!!!!!!!!!!!!!!
which rom
which rom did u install??
try crystal v4....
the problem cud also occur due to a faulty card....
(sorry for d bad english)
i have a jasjam.. i had dopod 838 pro before n i always upgrade it to 6.1... but this time i was on v8 manila 2d rom then i want to change it to phamquang v20 rom. while upgrading i think 4% error 302 occur.. then after this.. my phone was bricked.. it reach d 1st logo screen(htc screen) and stuck always there.
can someone help me? all reply will be appreciate...
mine is :
ipl: 1.04
spl: 2.10 olipro
Try the sd card method to fix.
1. Format sd card fat32 and copy the .nbh file onto it. Rename to hermimg.nbh.
2. Insert card and reset to bootloader.
3. Follow on screen directions.
Should reflash the OS, just remember to have more than 50% battery power and backup your sd card so you can restore it before you flash. SD card has to be 2Gb or less.
Cheers...
sdcard upgrading
man i already follow sd card upgrading but nothing happened when i get onto bootloader screen.
2 things to check, the .nbh file MUST be named hermimg.nbh with no spelling errors. The sd card MUST be 2Gb or less and HAS TO BE FORMATTED FAT32. It comes formatted FAT.
To get to bootloader, hold power, ok button above flywheel and reset with stylus. Hold in until tri-colour screen appears.
I know you are familiar with it but others who read this may not be.
Most people who say that it doesn't work have the one of the 2 things I mentioned set up wrong, mostly they don't format the sd card FAT32 as they assume its already formatted like that. I also found, on occsion, even though I had formatted the SD card \fat32 that it required formatting again.
Hope this helps.
Cheers...
Basically, here is m problem:
I have a hermes. The GSM wasent working. I though maybe an upgrade to WM6 could correct some software bugs.... Wrong!
I realized it actually briecked (type 1a). Trying to follow the instruction to fix it, but i am not able to send ANYTHING to it!. Either by SD or Custom RUU. Finally i am standing with a Hermes, WM6, and it will NOT accept any flashes i try to put in it!
Its on HardSPL (2.10) IPL 1.04
Thanks in advance
Stephen_D
EDIT: Forgot to say what happens when i try to flash it!
With an SD card all I get it "Loading..." then returns to the bars
By USB it starts updating And freezes on 0%, then the software pops an error after 5 mins like what it can communicate.
Thanks
sort of the same problem...
I've been trying to flash a ROM for the past hour now and my phone doesn't get flashed.
(I already have HardSPL and I'm using a 1gig micro sd)
What I did:
Format the sd card to FAT32
copied the RUU_signed.nbh to sd card then renamed it to HERMING.nbh
I place the sd card on the phone that's connected to a charger
I press Power Button and Ok button on the left side then push reset
What happens:
It goes to bootloader mode (tricolor screen)
then it says loading...(2 seconds)
then goes back to the tricolor screen again
I waited for the prompt that I need to push the Power Button but it never came, so I soft reset it and tried it again but the same all over again.
The ROM I was trying to flash is the AT&T stripped ROM, I read it here that it's better to flash a stock ROM first before flashing/upgrading to a cooked ROM.
By the way I just found out that my X01HT isn't a Softbank, it's a DoCoMo.
Is my phone upgradeable?
Can someone please tell me what I missed?....I really want to upgrade my phone without bricking it.
Thanks!
Stephen_D said:
With an SD card all I get it "Loading..." then returns to the bars
Click to expand...
Click to collapse
What format is your SD card? Fat or Fat32?
Its gota be Fat32 to flash from it.
it's all good now....
I've given up flashing my phone from the sd card so I decided to flash it with my laptop instead. Luckily it worked without a hitch.
I'm so loving my phone now, been playing with it for 2 hours and the usual hang ups I got before are non-existing anymore.
To use the sd card method you need to check that the .nbh file is hermimg.nbh, NOT herming.nbh as you had written on your previous post.
The holy trinity of sd card flashing, Formated FAT32, Named hermimg.nbh & sd card is 2Gb or less...
Cheers...
I see.....
ok hermimg.nbh
will try this again, maybe next week since I'm enjoying my new ROM right now.
Thanks ultramag69!
hy all
i get success to reflash my tg01 with wp7 tango. i was happy with this real improvement and last days i got a problem when tg01 freezes and boots and when on i got a error message saying that the sd card was locked . i made a search on the forum and i found that i can unlock the sd card with a nokia phone. i have a nokia e90 i tested formating the card on it and this was done . i put the card on the phone he boots like a hard reset phone and he began to install somme aplications and boots with wp7 again. and after a while he freezes and give the error message about the missing sd card.
the phone keep locking the card fter every unloking
please help me i really loved the wp7.
and thanks for every advice
I got same problem before, after i try other SD card, it work for me. No more show up SD card locked.