Q&A for [RECOVERY] [ROM] Wiko DarkMoon (MT6582) [MULTILANG]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] [ROM] Wiko DarkMoon (MT6582) [MULTILANG] . If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can't boot into Android
Hey there!
Hope you are able to help with this little trouble: I have successfully installed the ROM following all steps, but when I finished it and the phone booted up correctly, I saw the available OTA for downloading. Dumb me, I tried to install it (before I saw the warning to not to install it) and since it was taking forever, I rebooted the phone explicitly.
Then all it does is taking me to the Carliv menu and there is no way of getting to boot the system. I'm afraid something in the boot section was corrupted with me trying to install the OTA. I tryied going all way down to the installation process (wipe data, wipe dalvik cache, and installing the ROM again) but nothing.
Any ideas for this idiot? Thanks in advance!
Edit: When I was about to fall into despair, I remembered there was a way to restore everything from stock. So I followed from official Wiko website all the instructions (as superdragonpt posted), and I managed to get my bootloader back on track. Tomorrow I'll try again installing the custom ROM, now without even touching the software updates.
Help with recovery
hi. i have a wiko darkmoon and i tried to make the recovery from superdragonpt but when i connect the phone to install the mtk drivers, nothing appears in the device manager, so i can't install it. i tried the manual installation but when i connect the phone with everything ready (sp flashtool and scatter file) it wont pass from de 0%. what can i do?
PS i trie in every usb port and still the same.
tnx
[RECOVERY] [ROM] Wiko DarkMoon (MT6582) [MULTILANG]
Hello,
I just installed this ROM and it seems to running just fine! Such a great improvement for my Wiko!
I've been reading through the thread and it seems I should be able to find "Performance" options and be able to open Gravity, but I have no performance options and gravity keeps giving error "GravityBox system framework not responding. Exiting". Some suggested reinstalling gravitybox and installing another cpu app, but I would like to know if that is advisable.
*Is it possible ohter applications might be missing?
Thanks!!
Error when I try to install the rom
Hi,
Everytime I try to install the rom, the recovery said there's an error. This is a little bit weird because I followed all the steps. This is not the first time I have this problem, whenever I want to install this rom (because I tried to install your LeWa OS rom, and it works successfully). I tried to download the rom a second time, but it's the same. I saw that nobody get the same error than me. If you want to know what it says:
- - Installing: /sdcard/WIKO_DarkMoon_JB_4.2.2_Stable_v1.0.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/WIKO_DarkMoon_JB_4.2.2_Stable_v1.0.zip
(bad)
Installation aborted.
Click to expand...
Click to collapse
And before this, I must to push on "Yes - Install untrusted zip" and it says "E: signature verification failed"
For information, I have the kernel you did.
I hope you can help me, and thanks !
(ew, and sorry for the bad english)
micromax a200
Can i use these rom for micromax a200 which has same spec like wiko darmoon pla say...?
Pls @superdragon reply
Help Please
Hi Guys
I need you help please.
I tried to do somthing with my Wiko Darkmoon, downloaded here from this forum the Stock Darkmoon ROM and the KIT KAT MOD (found in a thread). Started to see if SP Flash could read some information from the phone (don't know how - Ignored the warning : if you don't know what to do than do nothing) and that was the moment when trouble begun.
The PC I was using was the one I have in my office. Don't know what happened PC interrupted what he was doing.
Now PC doesn't see my device anymore (says unknown USB device) and phone doesn't switch on any more.
What can I do to fix it? Did I ruin my phone?????
Hel please, anyon who can explain (in simple words) what to do???
Thank's in advance to anypone
Hi, this is one of smartphone users Micromax A200 aka WIKO darkmoon. I and some forum users 4pda interested in, coming out into the light of your rom aosp 5.0 or 5.1.1? please give your answer , its important for us)))
cwm for Darkmoon
Hey Guys, im searched for a cwm 6.0.5.1 for Wiko Darkmoon. but i cant find a Download link. Have you working Links for me, so i can flashed this recovery?
I will install cm12.1 unofficial, but i have the unofficial kitkat with carliv toch recovery.
how to change this to cwm?
thanks for your answers
Related
Q&A for [ROM][18-12-2013] ZTE V987 (MT6589) custom ROMs (JB)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Blocked in stock recovery mod
Hi everyone,
I'm writing this post because I'm hopeless in this moment. I have my ZTE v987 blocked in stock recovery mod ("android system recovery 3e") with no chance to flash or install any ROM or Firmware.
It happens to me when I tried to reflash CWM Recovery 6.0.3.7 with flash tool to reinstall Bruno Rom instead of MIUI ROM. I needeed to reflash because since when I installed MIUI ROM, the CWM rebooted by itself after few seconds, preventing from install any zip file.
Unfortunately, I flashed preloader and after that, my zte dead (it do not even power on).
However, reading some tread and many, many posts and guides about to unbrick mtk65xx, I find a solution (thanks to Bruno) to raise from the death my smartphone. Basically, I was able to flash my zte using flash tool and "ZTE V987 stock partitions" (posted by Bruno to another member of this comunity) but from that I'm blocked in android system recovery 3e.
Can everyone help me, please?
Thanks a lot
You just need to flash CWM recovery, that's all.
bgcngm said:
You just need to flash CWM recovery, that's all.
Click to expand...
Click to collapse
Thanks for the answer.
I found a solution and now my zte v987 works fine, but I have still some huge problems:
SIM not detected, pttycmd1 not found, NVRAM empty
Unfortunately, the only way to resolve these problems is to get another functioning zte v987 and make a backup with Mtk droid tools. So, I can make a radio and NVRAM restore.
There is nobody in my town with this model of zte smartphone and I can't do nothing to bring back my phone.
If anybody can help me posting this backup, I will appreciate a lot
can i install this rom on my zte v967s
dalexander said:
Unfortunately, the only way to resolve these problems is to get another functioning zte v987 and make a backup with Mtk droid tools. So, I can make a radio and NVRAM restore.
There is nobody in my town with this model of zte smartphone and I can't do nothing to bring back my phone.
Click to expand...
Click to collapse
I don't have V987 anymore, but fortunatelly I kept some old files on the computer. You can find in attachment my old V987 NVRAM backup. After flashing it you should change IMEI numbers.
gautam2010 said:
can i install this rom on my zte v967s
Click to expand...
Click to collapse
No, it doesn't work on V967S.
Hi Bruno :
The camera make me some problems. Could you make a zip to revert stock app?
I wouldn't like to reinstall again and choose it from aroma installer menu.
Thanks in advance!
ZTE V987 locked network
I flashed a different rom this afternoon but I didn't like so I came back to Bruno's . When I restored my backup my phone asks for my pincode and "INSERT BLOCK ME SIM"
I got my unlocked phone so I sent an email to the webpage where I bought it, but I have no idea if they will be able to help me, because I have been flashing my phone.
There is any solution? Any way to get the code or using my simcard without it?
Thanks you for your attention
criscabello said:
I flashed a different rom this afternoon but I didn't like so I came back to Bruno's . When I restored my backup my phone asks for my pincode and "INSERT BLOCK ME SIM"
I got my unlocked phone so I sent an email to the webpage where I bought it, but I have no idea if they will be able to help me, because I have been flashing my phone.
There is any solution? Any way to get the code or using my simcard without it?
Thanks you for your attention
Click to expand...
Click to collapse
Hi, did you solve the problem?
I have the same problem after I flash "HTC ONE M8" firmware. I successful unlock first sim card with 12345678 code, but the second is still locked.
Thank you,
Daniel
Back key
Hi all! This is my first post here at xda forums, so bear with me...
The back key on my V987 does not work anymore. Have anyone had similar problem with this device? Could it be physical fault?
BR,
Kurt
Edit: Ok, found this, have to try it first.
ZTE v987 Grand Quad Lite is Completly Off During flash
Any Body can Please Help How to revert it back all
i have zte v987 phone while flashing of recovery my mobile is get switched off . if i pressed power button also doesnt work
please help me how to rectify this issue
[Q&A] [TUTORIAL] Unbrick/Firmware restore | Flash GUIDE | ROM List & REVIEWS [09/11/
Q&A for [TUTORIAL] Unbrick/Firmware restore | Flash GUIDE | ROM List & REVIEWS [09/11/2012]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TUTORIAL] Unbrick/Firmware restore | Flash GUIDE | ROM List & REVIEWS [09/11/2012]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Flashing rom
Can i flash a rom into already installed custom rom phone?
Battery doesn't charge after flashing open Australia
First of all, thanks to you and this post that I could bring my phone back to life after flashing Open Australia as demonstrated in the video.
But I encountered another problem, after correctly booting and working fine for few hours, my battery went dead and now it won't charge at all. Appears like a dead phone. I took out my old original battery (left with limited life) and it works fine. But my current battery doesn't work. This battery was charging just fine before flashing Open Australia.
What could have gone wrong and what should I do now?
Samsung Galaxy ace GT-s5830i failed to update.
Hello, I am trying to update to a higher android version by using automatic updator , it downloads the update and asks to restart. after restartinf it says installation failed try using kies. The problem is I don't have a pc or a Samsung workshop nearby. Any other way to update it to 4.2? My phone is rooted also tell me if anything more is required.
Thanks.
my 5830i wont start or charge after running out of battery during update je;llyblast
my 5830i wont start or charge after it ran out of battery installing the new software jeellyblast....how do i fix it, th computer cant even detect it?
please help..its my only phone.
[email protected] said:
my 5830i wont start or charge after it ran out of battery installing the new software jeellyblast....how do i fix it, th computer cant even detect it?
please help..its my only phone.
Click to expand...
Click to collapse
Your device is completely dead or your have access to either of modes ( Download mode/Recovery Mode ) ? Have you tried to wipe battery stats through Temp-CWM ?
This troubleshooting session might work with your PC connectivity issue by me.
splitfuse2
I have succesfully unbrick my Ace S5830i using splitfuse2. Thank you very much.
samsung GT-5830i not open recovery mode
samsung GT-5830i not open recovery mode how i do plz plz help me
installed wrong firmware (gt-s5360) on my gt-s5830i
Pls I need help urgently!!!!!. I installed a wrong firmware (gt-s5360) files: pit, bootloader, pda, modem and csc on my gt-s5830 and now it will not even do bootloop which is the original problem. it only flash light from camera and won't come up. PLZZZZZZZZZZ help somebody. I will really appreciate.
Wrong firmware (gt-s5360) installed on my gt-s5830i
Pls does anyone have a solution for me still? I can't use my phone, can't even get to download mode or reset mode. What do I do plzzzzzzzzzzzzzz help.
mighty40 said:
Pls does anyone have a solution for me still? I can't use my phone, can't even get to download mode or reset mode. What do I do plzzzzzzzzzzzzzz help.
Click to expand...
Click to collapse
Sorry for late reply. If no download mode than it means u have hard bricked ur phone which means u need to go to service center
Q&A for [ROM] [4.4.4] [i9200,i9205] [S5 mini, Note 4, S4mini Port]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.4] [i9200,i9205] [S5 mini, Note 4, S4mini Port]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
[ROM] [4.4.4] [i9200,i9205] [S5 mini, Note 4, S4mini Port]
there no new ROM just find one folder name old stuff..
thanks for your great work
Hi, friend gets you mega i9205.Tova Is file. 2015-01-16.07.49.38_KOT49H.I9200XXUDNK1 ?
Set on i9200 I lost my sim wifi and wave as the Vietnam Please instruct me how to fix it ... I thank
Hi, thanks for bevinabraham what will happen if pravish.Taka Mega I9205
1.flash with Odin3 v3.09
Build date: Mon, 10 Nov 2014 07:21:51 +0000
Product Code: TPH
PDA: I9205XXUDNK1
CSC: I9205TPHDNK1
MODEM: I9205XXUDNK1
2. RECOVERY PhilZ Touch 6 flash
* file: bevin_i9200_i9205_Port_Note4_S5mini.zip
will get you so ?
Not Working on i9205
Hi, my Wifi and Mobil data are not working. Someone there who knows what ive done wrong?
1. Flashed Stock Rom (I9205XXUDNE4_I9205TPHDNE4_I9205XXUDNE4_HOME.tar)
2. Flased Recovery Philz Touch
3. Booted up into Recovery and installed your ROM
4. Without booting up the phone i went back to Download Mode and installed the NON-HLOS out of the arcive from Step 1.
5. Phone booting up - and WIFI/Mobile Data is broken (com.android.phone is forccloasing every 5 seconds)
SU Binary update brings the normal GSM to work( sometimes ), but wifi and mobile data are still broken.
Help
pls port
Pls port to i9205 lte i've installed it its veryyyyyyyy nice but its how you said problems with wifi etc
fix doesnt work
After installing fix not booting. Anything with kernel
Bootloop in recovery
without fix -》 phone closed every second
I9205 lte
xlatinovicx said:
After installing fix not booting. Anything with kernel
Bootloop in recovery
without fix -》 phone closed every second
I9205 lte
Click to expand...
Click to collapse
Please try this new Fix, I guess the framework files in the fix were causing the Bootloop.
Try this fix,
Link.
Updated the Original Post.
https://www.mediafire.com/?90gawze5vd4wv99
new fix doesnt work
1. New fix doesnt work bootloop still alive
2. Modem Flash failed any way i try it
I9205 lte
xlatinovicx said:
1. New fix doesnt work bootloop still alive
2. Modem Flash failed any way i try it
I9205 lte
Click to expand...
Click to collapse
Here another last fix.
https://www.mediafire.com/?6la12p1y9s3cr45
Flash ROM
Flash Fix
Flash modem
Reboot.
Setup..
Update SU Binary
Reboot
If boot loop..
Wipe Cache and Dalvik and reboot to setup
If I volunteer to test, would you be able to make a sprint version?
@bevinabraham i have error phone. Not allowed mm3# doses. This rom have by pass secruty check
@bevinabraham
Hi there. Have a major trouble wit SMS on Russian (non latin) language. When im tryin to send sms,i got notify about Universal input and i receive "?", but not correct text.
In sms settings i dont have option to select input method
I527-ATT
Can I install this rom on att i9200 LTE 16gb or i527???
Galaxy S5 Mini Lollipop
Could someone port Galaxy S5 MIni Lollipop ROM (5.0) for our Mega I9200/I9205??? I'd like to have Android Lollipop with stock Touchwiz and Samsung apps. Is it possible?
I've installed it....
telephone network no...
how to fix the problem I...
please help.
problem with my mega 9200 device
my model 9200 (mega) i need to install this rom ...
but when i install it from recovery (using PHILZ recovery)
me device send me problem message ... i think becuse
the download not complete .. whoever .. i need anew
download link???? Please ......
Help
Hi I have installed this rom on my I9200 following all the basic instructions about flash rom, however after to leave the installer wizard my phone is not starting he stopped at the samsung start screen.
I should I do? Note that I have chosen the standard features to install it.
Thank you
galaxy mega gt-i9200
i flashed rom when finshing and start open the phone i get proplem the touch screen not working.
i try many roms vir 4.4.2 and 4.4.4 but the proplem still with my mega touch screen not working.
can any one help me pls.
thanks
Q&A for [RECOVERY][PORTED] TWRP v2.7.1.0 by Gody
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][PORTED] TWRP v2.7.1.0 by Gody. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Soft keys problem
after installing TWRP recovery my screen has softkeys installed automatically.I want to remove them
Plz help me
:crying::crying:
tempdhyey said:
after installing TWRP recovery my screen has softkeys installed automatically.I want to remove them
Plz help me
:crying::crying:
Click to expand...
Click to collapse
not possible check if u instald any xposed module to enable soft keys or edited build.prop
gody420 said:
not possible check if u instald any xposed module to enable soft keys or edited build.prop
Click to expand...
Click to collapse
Thanks for ur support !
I was able to remove it by modify buil.prop
Sry!!
Please help
Hi! I get black screen on my i8552 in Download mode and Recovery mode unless I try CWM or TWRP, though the OS is downloading and device is working. Could you please assist me with solving the issue?
i8552 bootloader changed
Hello. I got i8552 which was made in October 2014 and it has changed bootloader so I get black screen in Recovery and Download modes. Could you please assist in modifying TWRP recovery for it ? Thanks in advance
Stock recovery for new i8552
Hey guys!
Here is the stock recovery for the i8552 devices made after August 2014:
https://drive.google.com/file/d/0B4Ha1KQcnrQwZFROb3Vhc0ZHMVk/view?usp=sharing
If you need service firmware for it you can get it here ( sorry, it is russian) https://drive.google.com/file/d/0B4Ha1KQcnrQwY2VUNlJuT1NlT0k/view?usp=sharing
Zhekamas said:
Hey guys!
Here is the stock recovery for the i8552 devices made after August 2014:
https://drive.google.com/file/d/0B4Ha1KQcnrQwZFROb3Vhc0ZHMVk/view?usp=sharing
If you need service firmware for it you can get it here ( sorry, it is russian) https://drive.google.com/file/d/0B4Ha1KQcnrQwY2VUNlJuT1NlT0k/view?usp=sharing
Click to expand...
Click to collapse
k il do il try to do it later has i am having exams now
LATEST][PORTED]TWRP v2.8.5.0(Material themed) by Gody
does not work on my 8552 edition of the phone - sentyabyr 2014.sorry for my english
ПРОБЛЕМА
my phone was released after the second half of 2014 twrp but it does not work ( black screen with backlight ), but the people of 4pda made mod that works with the screen, but backup is not working and wipes are also , etc.
PLEASE respond lot of people on 4PDA talking about it ( if it is necessary I will throw off the file you are working with TVRP ) himself from Ukraine
Nickcolay said:
my phone was released after the second half of 2014 twrp but it does not work ( black screen with backlight ), but the people of 4pda made mod that works with the screen, but backup is not working and wipes are also , etc.
PLEASE respond lot of people on 4PDA talking about it ( if it is necessary I will throw off the file you are working with TVRP ) himself from Ukraine
Click to expand...
Click to collapse
i already posted a TWRP for new galaxy win but if its not working for you then
give me your stock recovery.img i'l try to help you, i'll port cwm recovery
E: Unable to mount
Hello, I'm using the TWRP for manufactured devices after July 2014. Always when I try wipe the device I get a lot of errors related to "E: Unable to mount...". This is a screenshot when I tryed to Cache & Dalvik Wipe after a flash attemp (which failed, but it isn't the problem here): i.imgur.com/OIyfJCk.jpg
Is it a device error or a problem with TWRP?
Bug google keyboard
is there anyway to fix google keyboard bug in 2.8.5
other than this nice recovery thanks bro
how to move backup from internal to external sdcard
i backup my stock rom in internal storage using twrp... i tried moving it just by copy n paste whole '"0"" folder to extnl sdcard twrp doesn't recognice backup
what should i do??????? i am using twrp 2.8.5
Q&A for [RECOVERY] [ROMs] ASUS Memo Pad HD 7 (me173x) [MT8125] [MULTILANG]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] [ROMs] ASUS Memo Pad HD 7 (me173x) [MT8125] [MULTILANG]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
vibeUi rom
Can u pls post a new download link with the vibeUi rom?
I would like to install vibeui too, can someone send me download link
Hurra!!!
I'm really glad to hear you back!!!
Thanks again for all your past and future work!!!!
P.S.: I've been using for long time the Snapdragon V1 ROM, but I would like to try the VibeUI, can someone share some link to download the ROM? Thanks in advance
I think I just managed to brick my tablet
At the first try i chose the wrong "MT6589_Android_scatter_emmc", does that matter?
I got the message:
Brom error ?? (10)
and after a new try :
SP FLASH TOOL ERROR : (8243)
[Platform error] The load and target are inconsistent!
It doesn't start anymore, is there any way to make it work again?
Thanks for ROM, but I think VibeUI is not beautiful. can use Lollipop UI or use stock android or new ASUS UI (Zen UI) ?
changelog
hi. what is changelog between ROM VibeUI v1.0 and ROM ME173X_v1.1_R2? we should download new version?
You can uninstall it using Titanium Backup
---------- Post added at 10:56 PM ---------- Previous post was at 10:50 PM ----------
RanzigerHans said:
I think I just managed to brick my tablet
At the first try i chose the wrong "MT6589_Android_scatter_emmc", does that matter?
I got the message:
Brom error ?? (10)
and after a new try :
SP FLASH TOOL ERROR : (8243)
[Platform error] The load and target are inconsistent!
It doesn't start anymore, is there any way to make it work again?
Click to expand...
Click to collapse
Just repeat the process...make sure that your tablet is turned off before proceeding...if you can't turn it off because it is locked in bootloop, open your tablet from the back and remove the battery...if you don't know how, search the youtube...
You can uninstall it using Titanium Backup...
---------- Post added at 04:05 AM ---------- Previous post was at 03:55 AM ----------
KyotaIV said:
I would like to install vibeui too, can someone send me download link
Click to expand...
Click to collapse
The download link is in the first page... It's still v1.0 though... A newer version is still being made. No eta yet...
ASUS MeMo Pad HD7 FM Radio?
I know there are custom ROMs for this tablet, just curious if any of them have unlocked any type of FM radio? I have this installed in my car but would like FM too.
1
Installed vibe on 2 separate 16 GB tablets. The one works perfect while the other won't activate the camera. Mirror works though.
Also on recovery 2.5
Slow tablet and WLAN fail
fertchen said:
Hi,
I have a Framaroot-rooted Asus Memopad 7 HD (Stock Rom, root is the only customization)
I rooted it a few months ago in order to run Greenify. I installed Greenify because the tablet felt very slow even though I have very few Apps installed.
This is my situation:
- The tablet reacts not very fast and
- ...sometimes not at all. Those occasions are followed by a ~10 second period of slow-motion of my previous inputs. Interesting to watch but not productive at all.
- The WLAN often fails to work after about 1 or 2 minutes of activating it. I then have to de- and reactivate it again in order to use it. On all routers and networks.
Thes issues combined make the tablet kind of useless for many productive tasks. And I am pretty sure it has not always been this way. Well, the WLAN issue maybe, but the slowness...I am not sure.
What can I do to fix these issues? I am not at all interested in super-fancy stuff, I just want to enjoy a tablet reacting faster than continental drift. Sure I could just buy a fancy new device but the thing is in great condition has good battery life and everything. I'd hate to consume more than I need.
Have any of you experienced these issues?
Is there anything I can do to change this?
What do you recommend?
Click to expand...
Click to collapse
Had the exact same issues on 16GB model K00B US OTA ME173X_US_user_4.2.4.04152_20140714 also rooted with Framaroot.
To resolve, I first did a complete backup and created an update.zip In Titanium Backup as well as a Nandroid backup in Recovery. Copied asus_CTR_2.5, aromafm-1.91, Asus_ME173X_v1.1_R2, VibeUI_ME173X_v1.0, and Asus_stock_camera. Then after reading over the instructions in posts #3 & #4 several times, I carefully followed the instructions step-by-step and successfully unlocked the bootloader and installed the Carliv Touch Recovery. With .zips copied to the sd card prior to flashing, I wiped data/factory restore, wiped cache, wiped dalvik-cache, then flashed asus_CTR_2.5 and rebooted recovery. This gave me full touch recovery. Next i flashed aromafm-1.91, then Asus_ME173X_v1.1_R2 and rebooted the system.
So far, the Asus_ME173X_v1.1_R2 ROM is flawless and is pretty much awesome! Both cameras working, saw no need to flash Asus_stock_camera; happy as it is. All lag/freezing issues - gone. All wifi(wlan) issues - gone. All issues - gone. extremely happy with this ROM so far; still playing around with it. Haven't got to flashing the VibeUI ROM yet but I've seen many excellent reviews in this thread, so I'm sure it will also resolve the lag/freezing & wlan issues you are having.
NVM
Is there a fix for the tablet not powering on below 50% charge? Anyways have to plug it in first.
Can ny1 help me with this.. i just want to install cwm recovery in my asus memopad hd 7 tab so that i can backup my current rom. so i need to carry out both "Unlocking Bootloader and Flashing the Custom Recovery: PART #1" and "Unlocking Bootloader and Flashing the Custom Recovery: PART #2" or i just need to carry out part 2 for installing cwm recovery
Sent from my ME173X using XDA Free mobile app
help calibration issue asus memopad hd 7
So I followed every step to the t to unlock boot loader and install cwm. I had rebooted to recovery and installed Rom every thing worked. Booted up and when it booted I cant touch anywhere on the screen. Seems like the calibration is not working. Any fix around that? Is there a file I can edit or add that will fix this issue
is there any link to download AOSP for ASUS MeMo Pad HD7 ??
is there any link to download AOSP for ASUS MeMo Pad HD7 ??
is there any link to download AOSP for ASUS MEMO pad 7 HD ??
is there any link to download AOSP for ASUS MEMO pad 7 HD ??
Hello .To do not open new topic i will ask here . I wanted to ask you about the procedure root in the above model .I have downloaded from the play store( Google) applications super user+titanium backup.I would like a member to explain to me in detail the process on how to convey all applications to external memory and what is the best rom for that model . I do not want to lose the GREEK language. With odin program becomes to fix? Thanks