Note 3 Pair with Bluetooth Cordless Phone (Panasonic) - Galaxy Note 3 Accessories

I'm having trouble with trying to get my Panasonic Bluetooth 6.0 Dect Plus KX-TG7644M cordless phone to work with my Note 3. I have two of my cordless phones paired with my Note 3, but when I answer an incoming call (coming to my cell phone) with the cordless phone, I cannot hear the person on the other end, just lots of static.

Related

BT Headsets for NOTE3- types, experiences, stability, etc

Hello all NOTE 3 users!
I would like to ask You about Your Bluetooth headsets experience with NOTE 3.
I started to use BT headsets more than 5 years ago (several types, Nokia, Motorola, SE, recently SonyEricsson MW600 and Sony MW1) and used it without any problems with Note1 and Note2, however with N9005 (stock rom XXUBMJ1) and currently Sony MW1 headset I am completely disappointed:
1. Headset disconnects by itself few times per week, does not want to restart the link by pressing "Answer" button until BT goes through ON/OFF
2. With BT headset connected - a few times per day - incoming calls, and outgoing calls starts without BT headset voice link active (even if BT headset is "connected"- in some cases during the call to start the voice link call bottom-right button on the note3 must be touched 3 times to in fact "activate" the headset voice link... => this should be ALLWAYS working!
3. SONY suggests Smart Connect (LiveWare) + Smart Wireless Headset Pro - problem exists with the software installed, I am testing it now without this software but with similar bad results so far...
Please post Your opinions and BT headsets types paired with NOTE3...
lukasz said:
Hello all NOTE 3 users!
I would like to ask You about Your Bluetooth headsets experience with NOTE 3.
I started to use BT headsets more than 5 years ago (several types, Nokia, Motorola, SE, recently SonyEricsson MW600 and Sony MW1) and used it without any problems with Note1 and Note2, however with N9005 (stock rom XXUBMJ1) and currently Sony MW1 headset I am completely disappointed:
1. Headset disconnects by itself few times per week, does not want to restart the link by pressing "Answer" button until BT goes through ON/OFF
2. With BT headset connected - a few times per day - incoming calls, and outgoing calls starts without BT headset voice link active (even if BT headset is "connected"- in some cases during the call to start the voice link call bottom-right button on the note3 must be touched 3 times to in fact "activate" the headset voice link... => this should be ALLWAYS working!
3. SONY suggests Smart Connect (LiveWare) + Smart Wireless Headset Pro - problem exists with the software installed, I am testing it now without this software but with similar bad results so far...
Please post Your opinions and BT headsets types paired with NOTE3...
Click to expand...
Click to collapse
I'm using a LG HBS-700 with my N3, and have had no issues what-so-ever.
SONY MW1 does not perform well!
Hello, I am continuing tests - NOTE3 + SONY MW1 (most current firmware 0.1.E.1.6) with all software installed is not stable, but without Smart Connect (LiveWare) + Smart Wireless Headset Pro software....it is a Total Disappointment! SONY "Premium" headset stays connected with NOTE3, however almost each phone call - incoming or outgoing
does not activate the voice-over-BT audio (phone bottom-right software button on the call screen remains gray, so the phone speaker is active, even if You answer the phone call by pressing ANSWER button on the MW1 headset) - it seems that BT connection between NOTE3 and MW1 becomes "lazy" few minutes after the phone call end, and then does not start again until phone soft key is pressed, or phone call is dropped and another call attempt is made.
If any SONY development guys are reading- please test it.
I have used MW1 with Note2 - it was not very bad, however much less stable than MW600 which was truly PERFECT.
With NOTE3 this is much less stable with software, and without Smart Connect (LiveWare) + Smart Wireless Headset Pro it does not work at all.
I will write to SONY support soon
i tested my MW1 with Note3 at a Samsung retail shop and indeed I am very unhappy with the audio quality. the audii cracking a lot
Motorola Boom
Using this now after testing the Motorola Sliver II. The Boom is about half the price and the sound is the best I have heard in quite some time.
I use it all day for work and have had about 20 different models but for the price, the sound clarity and loudness make this a great choice.
The Sliver had issues where everyone talking to me said I sounded as if I was in a tunnel.
Try the Boom. You'll see!
I haven't had any problems with my Motorola HX550, in fact it has been a great BT headset for $40 dollars. No one has a problem with how I sound.
I have been using my Plantronics voyager legend with great results. For stereo music, I've had decent luck with the Plantronics backbeat 2. decent audio. I'm glad I checked this before getting and mw1 as I as about to pull the trigger on this to use with my klipsch headphones. Has anyone heard about the sbh52 from Sony yet or the mw600 with the GN3?
Heres the ones i use.. http://www.jaybirdgear.com/bluebuds-x-bluetooth-headphones/
been using a motorola Elite flip, no problems whatsoever.
No problems here with Sony hbh-52 and offcourse I have installed Sony software.
Sent from my SM-N9005 using Tapatalk
I'm using Jaybird Bluebuds X. They're perfect, very good sound quality, you can use them nearly 7 to 8 hours with one charging.
Gesendet von meinem SM-N9005 mit Tapatalk 2
The best choice is to take the headphones with APT-x codec:
exemple Denon AH-W200
micger21 said:
The best choice is to take the headphones with APT-x codec:
exemple Denon AH-W200
Click to expand...
Click to collapse
I use the Samsung HS3000 and get good results given the low price of this headset.
Sent from my SM-N9005 using XDA Premium 4 mobile app
schelde_sun said:
I'm using Jaybird Bluebuds X. They're perfect, very good sound quality, you can use them nearly 7 to 8 hours with one charging.
Gesendet von meinem SM-N9005 mit Tapatalk 2
Click to expand...
Click to collapse
I agree with this completely. I had to change the ear pieces but now they are perfect.
Sent from my SM-N900P using XDA Premium 4 mobile app
MW1 still does not work - no support from SONY
Hello, I tried to obtain answer regarding firmware upgrade through SONY Xperia care support forum - outcome is ZERO reaction from SONY so users - beware of MW1 - for those interested - link below.
http://talk.sonymobile.com/t5/Wireless-accessories/bd-p/accessories?sl=y&sso_no_log=y
I came back to MW600 and those headphones work with NOTE3 well.
Sony smart watch 2 seems to have some problems too - a lot of post regarding problems on the same support forum.
Plantronics Voyager Pro HD
Plantronics Voyager Pro HD:
Supposedly 6 Hours of talk time, I would say I've experienced less.
It knows when it's on your ear, but I don't quite know what this function really does because it still works even when off my ear.. sooo
Ear buds don't really suit me, it seems to mount alright on my ear but could seal on my ear better.
This really worked great for me at first on my Note 2.
I don't know if it's the headset because I didn't have issues with my LG G2 or Note 3 however, it seemed to pick up the mic very poorly. People weren't able to hear me well and I need to practically shout for them to hear me.
When I use my car's Bluetooth it doesn't seem to have any issues. It sorta cut in & out on my G2 though now that I remember.
Anyways anyone else happen to have the same headset?
schelde_sun said:
I'm using Jaybird Bluebuds X. They're perfect, very good sound quality, you can use them nearly 7 to 8 hours with one charging.
Gesendet von meinem SM-N9005 mit Tapatalk 2
Click to expand...
Click to collapse
Yep, best out there. Little expensive, but the sound is amazing, not to mention there lightweight, small size and long playtime. Grab some, you won't regret it!
Samzebian said:
been using a motorola Elite flip, no problems whatsoever.
Click to expand...
Click to collapse
I have the same blue tooth earpiece it's pretty good and talks to you too and activates svoice battery life is good also
Sent Via Tmobile note 3
My jaybird freedoms work good.
I use several bluetooth headset currently.
Jaybird Bluebuds X as my main bluetooth headset for music and vidoes and it's working flawlessly. Fantastic audio quality and loudness more than I can handle.
Jabra BT620s when I am home since it's more comfortable than bluebuds.
Jabra BT8040 most of the time and it is connected with my galaxy gear. This combo works really well. Clear call quality, good connection and perfect set up for me with my daily routine when I don't need to listen to music or watch videos.

Are there still problems with Bluetooth in Kit Kat?

Hi!
I have not been able to successfully use the bluetooth on my or my mom's Moto Xs with my Mom's car's bluetooth. She has an older Lexus (2005) and it pairs/works fine with her iPhone 5 and her iPhone 4s. The car's bluetooth requires a passcode, which I know and typed in during the pairing process (not sure if this is relevant or not).
I got her a Moto X motomaker (running 4.4 out of the box) and it was difficult to get it to pair with the Lexus, but it finally did (took many tries before her Moto X could see her car's bluetooth). When I turn on the car, it says bluetooth connection successful and the phone shows as connected to the car through bluetooth but calls are not routed through the car's speakers - they are routed through the phone's external speaker. During a call when I manually try to route the call through the bluetooth connection, the display indicates that the call is being routed through the bluetooth connection but the sound does not come through the car's speaker.
On the Moto X, the car's bluetooth profile says phone audio but no option for media audio is present (not sure if this is relevant).
I can pair my Motorola Boom, Buds, Whisper and Plantronics bluetooth headset just fine with her Moto X. I did a factory reset of her Moto X and paired/unpaired the phone with the car numerous times. Same issue when I pair my Dev Ed Moto X (locked and unrooted), so this seems to be an Android problem to me since both iPhones pair with her Lexus fine and have no issue in routing calls through the car's speaker.
We are on Verizon and her phone has no apps installed on it other than what came on the phone out of the box.
Any thoughts? Is it just that the Kitkat bluetooth has bugs? I had a GNex before getting my Moto X and the last update before Google end of lifed the GNex royally screwed the bluetooth. I had hoped the Android bluetooth issues would be fixed by now, but it doesn't look like it.
I am soooo disappointed as this is a dealbreaker for her and she won't be switching to Android unless I can get the bluetooth to work for her in her car.

Note 3 won't pair to pioneer deh-x6600bt bluetooth stereo

My samsung galaxy note 3 from sprint will not communicate with my stereo for some reason to pair it's a brand new stereo and it works good with one in my pickup but not with the pioneer the codes match and stereo says error and phone says unable to communicate
With my Kenwood, I had to reference the manual. It wasn't as straight forward as it might seem. Try reboot the phone. Get into the setting for pairing a phone with the stereo. There might be different Bluetooth profiles in the stereo. Once you have the stereo in pairing mode, turn on BT on the phone and make it discoverable to other devices. It might take a few tries with the stereo. Mine was stubborn at first and wasn't as obvious as I would have thought.

Getting my lg V 10 phone to run through my car audio speakers when placing a call

I just made the switch from Apple iPhone to Android I have a v10. When I had the iPhone and I wanted to make a call in my 2011 Chevy Equinox the phone ran through my car speakers so the phone could hear me talking. With the LG V10 when I want to make a call the phone does not go through my car audio speakers and as a result this phone does not hear me and attempts to call and do anything other than the person I'm trying to call. How do I fix this?
I have my V10 connected with Bluetooth to my 2015 Camry and it makes and receives calls flawlessly

Question Pixel 6 won't pair with Galaxy Buds Live

I've had my Buds Live for some time now and used them with a Pixel 5 and work iPhone. They don't appear in the Pixel 6 bluetooth pairing menu. The Galaxy Wear app sees them, but gives a "can't communicate" error when I select to pair with them. I made sure the buds weren't paired with any other device and tried rebooting my phone and reinstalling the Galaxy Wear app.
I've successfully paired another bluetooth headphone with the Pixel 6, so it should be working.
Any thoughts?
FIXED....I had to unpair them from my Pixel 5 first. Even though the Pixel 5 was turned off they wouldn't pair with the Pixel 6. I don't understand, but they're paired with the Pixel 6 now.
Just ran into this when I finally got my P6Pro... If anyone from the future finds this thread and like me you already factory reset your old phone prior to trying to pair your earbuds and can no longer go back and unpair them from your previous device.
Instead you can just put the ear buds in your ears and long press on both ear buds at the same time for 3 seconds until you hear a single loud beep from both earbuds simultaneously. That seems to put them into pairing mode. At that point your phone should be able to connect to them from the Galaxy Wear app.
matt0720 said:
Just ran into this when I finally got my P6Pro... If anyone from the future finds this thread and like me you already factory reset your old phone prior to trying to pair your earbuds and can no longer go back and unpair them from your previous device.
Instead you can just put the ear buds in your ears and long press on both ear buds at the same time for 3 seconds until you hear a single loud beep from both earbuds simultaneously. That seems to put them into pairing mode. At that point your phone should be able to connect to them from the Galaxy Wear app.
Click to expand...
Click to collapse
I couldn't figure out why my Buds+ wouldn't pair with my Pixel 7 after factory reset and this solved the problem. Thanks for sharing.

Categories

Resources