Hi, a friend gave me his mediapad x1 7D-501u, coz he had forgot the password and bought the Nexus 7.
I cant seem to reset the mediapad to its factory settings though!! I tried booting into the bootloader, but when I press the volume down + power for 10 seconds, the tab just starts normally, but now it says "Safe Mode" near the lockscreen.
Is there anyway I can reset this tab for use ? Also, I tried vol Up+ vol Down + power, but it boots into an an update loop and then tries to update and says that no file was found in the SD card. Then a big Red "FAIL" comes on the screen, and it says "please press the power button for 10 seconds to restart"
Please can anyone help on this ??
TarunN5 said:
Hi, a friend gave me his mediapad x1 7D-501u, coz he had forgot the password and bought the Nexus 7.
I cant seem to reset the mediapad to its factory settings though!! I tried booting into the bootloader, but when I press the volume down + power for 10 seconds, the tab just starts normally, but now it says "Safe Mode" near the lockscreen.
Is there anyway I can reset this tab for use ? Also, I tried vol Up+ vol Down + power, but it boots into an an update loop and then tries to update and says that no file was found in the SD card. Then a big Red "FAIL" comes on the screen, and it says "please press the power button for 10 seconds to restart"
Please can anyone help on this ??
Click to expand...
Click to collapse
Is there any reason you can't just do a "Factory data reset" from the "Backup & reset" setting?
Its password locked
Easiest way is to download an official full ROM (not an update), follow the instructions on how to put it on an SD card and start the X1 with volume+&- and power.
Try Volume Up + Power. Worked for me.
Hold the Volume Up Connect the charge cable into the tablet.Wait until you get into recovery
Related
My STS got stuck halfway while updating , which i don't understand why as I've reset the STS to factory setting before downloading the contents to update , is there anyway to resolve it ? Now on the screen is showing " Error (0x00010002). " which i can't even "Google" it to find WTH problem am i facing with . Personally been to the Service Center trice regarding problems with the tablet , doubting my tolerance limit if i have to go once again and wait for ages before hearing any news about it .....so any Pro Might have Any Idea what is the problem ?
To be clear, do you have a bricked device now?
Or does it still reboots?
Option for if it dont boot normally
1. Shut down your tan by long pressing power button
2. Wait for 5 seconds,
3. Press volume down + power button to get in recovery
4. Navigate with the volume rockers, and confirm your option with the power button
5. Search for factory reset, try that one,
So I tried rooting my alcatel t10 using this method http://forum.xda-developers.com/showthread.php?t=1886460 and after choosing normal, and the alcatel turned off, automatically turned back on, showed the logo now it's just a blank screen that's on, any help please?
Hi,
Can you enter stock recovery or bootloader ?
If you can,
did you try to clean cache or factory data/reset ?
XPACT123 said:
Hi,
Can you enter stock recovery or bootloader ?
If you can,
did you try to clean cache or factory data/reset ?
Click to expand...
Click to collapse
I'm very new with the Alcatel t10, can you tell me how to do any of those?
tails100 said:
I'm very new with the Alcatel t10, can you tell me how to do any of those?
Click to expand...
Click to collapse
I don't own alcatel, but usually you enter boot menu by holding power on + volume down button while phone is booting.
You should see android with yellow triangle (it may differ).
From there menu should pop up when you press both volume up and down.
Use volume up/down to navigate trough menu and power button/camera button to select.
Select clear cache first and then try to reboot.
EDIT :
I found this :
Alcatel One Touch T10 must be OFF
REMOVE SD CARD
2 STEPS
1. PRESS POWER ON & VOLUME DOWN simultaneously
(WAIT UNTIL THE ANDROID CHARACTER SHOWS UP(WITH DAMAGE BELLY).
2. PRESS VOLUME DOWN ALONE 5 TO 10 TIMES OR UNTIL THE OPTION SHOWS UP.
(USE VOLUME -/+ FOR SELECTION AND POWER ON/OFF OKAY/ENTER)
Btw removing SD card isn't necessary but sometimes it can format sd card too so it is just to be on safe side if you have a lot of data on SD CARD.
XPACT123 said:
I don't own alcatel, but usually you enter boot menu by holding power on + volume down button while phone is booting.
You should see android with yellow triangle (it may differ).
From there menu should pop up when you press both volume up and down.
Use volume up/down to navigate trough menu and power button/camera button to select.
Select clear cache first and then try to reboot.
EDIT :
I found this :
Alcatel One Touch T10 must be OFF
REMOVE SD CARD
2 STEPS
1. PRESS POWER ON & VOLUME DOWN simultaneously
(WAIT UNTIL THE ANDROID CHARACTER SHOWS UP(WITH DAMAGE BELLY).
2. PRESS VOLUME DOWN ALONE 5 TO 10 TIMES OR UNTIL THE OPTION SHOWS UP.
(USE VOLUME -/+ FOR SELECTION AND POWER ON/OFF OKAY/ENTER)
Btw removing SD card isn't necessary but sometimes it can format sd card too so it is just to be on safe side if you have a lot of data on SD CARD.
Click to expand...
Click to collapse
It doesn't appear, I tried looking for another method like sw update via sd card but I cannot find everywhere I look I cannot find the update.rar or something.
tails100 said:
It doesn't appear, I tried looking for another method like sw update via sd card but I cannot find everywhere I look I cannot find the update.rar or something.
Click to expand...
Click to collapse
Ok so phone was off, and holding power button + volume down (until that android appears or something) doesn't work ?
XPACT123 said:
Ok so phone was off, and holding power button + volume down (until that android appears or something) doesn't work ?
Click to expand...
Click to collapse
Yep it was off.
Edit: Tried it with - and the android with the belly showed up now I'm stuck at the android, pressing the - won't help, same goes for +.
Okay, after holding Vol down + Power while booting, you will see the android logo with damaged belly, during this time, press power and vol up at the same time, the menu shall appear.
tails100 said:
Yep it was off.
Edit: Tried it with - and the android with the belly showed up now I'm stuck at the android, pressing the - won't help, same goes for +.
Okay, after holding Vol down + Power while booting, you will see the android logo with damaged belly, during this time, press power and vol up at the same time, the menu shall appear.
Click to expand...
Click to collapse
Ok so did you clear cache ?
XPACT123 said:
Ok so did you clear cache ?
Click to expand...
Click to collapse
Didn't help, so I just did a factory reset.
XPACT123 said:
I don't own alcatel, but usually you enter boot menu by holding power on + volume down button while phone is booting.
You should see android with yellow triangle (it may differ).
From there menu should pop up when you press both volume up and down.
Use volume up/down to navigate trough menu and power button/camera button to select.
Select clear cache first and then try to reboot.
EDIT :
I found this :
Alcatel One Touch T10 must be OFF
REMOVE SD CARD
2 STEPS
1. PRESS POWER ON & VOLUME DOWN simultaneously
(WAIT UNTIL THE ANDROID CHARACTER SHOWS UP(WITH DAMAGE BELLY).
2. PRESS VOLUME DOWN ALONE 5 TO 10 TIMES OR UNTIL THE OPTION SHOWS UP.
(USE VOLUME -/+ FOR SELECTION AND POWER ON/OFF OKAY/ENTER)
Btw removing SD card isn't necessary but sometimes it can format sd card too so it is just to be on safe side if you have a lot of data on SD CARD.
Click to expand...
Click to collapse
I tried following the instructions above but no android logo or icon is showing up. It only displays 'alcatel one touch' then 'loading' and then 'alcatel one touch' again. I was locked out of my device because of too many pattern attempts issue. I just want to hard reset my tab but i cant get to recovery mode. What else can i do? Need help pls.
---------- Post added at 03:17 PM ---------- Previous post was at 03:12 PM ----------
I know its off topic but i just need help to get to recovery mode/boot menu first
I forgot the pin to my Dell Venue 7 Android tablet.
I was looking to factory reset the password however. When i acess the boot manue, Hold down power + vol down, the only options I have are
Reboot Droidboot
Reboot
Recovery
Power off
Any Ideas ?
How I can remove the pin or factory reset the tablet
mejiam10 said:
I forgot the pin to my Dell Venue 7 Android tablet.
I was looking to factory reset the password however. When i acess the boot manue, Hold down power + vol down, the only options I have are
Reboot Droidboot
Reboot
Recovery
Power off
Any Ideas ?
How I can remove the pin or factory reset the tablet
Click to expand...
Click to collapse
so to reset your tablet,
reboot to fastboot (what you just did)
use the volume and power keys to select recovery
wait and your tablet should show the android logo on its back
then hold volume up and the power button for 2-3 seconds
now there should be a option that lets you reset your tablet
So I have tried this multiple time with no success is there another way or can you upload a video please[email protected]
Dell Venue 7 HARD RESET
It works, after being in : Reboot Droidboot
reboot
Recovery
Power off
power button to enter the option appears recovey and saying no commands android
then you let down the volume button and more powe appear for three seconds and recovery options and selecionas factory reset
I've tried this multiple times and it doesn't work. I get to the screen with the Droid on it's back and nothing. I tried the V+ button and nothing. I tried the V- button, still nothing. Tried both with power button, and nothing. Please help.
lenovo :cpu mtk 6575 1ghz
system memory 1g lpddr2
wlan 802 11bgn plus bt4
wwan: wcdma
os: andorid ics (i think 4.0.4)
manufactured for lenovo date 2012-11-02
what i did i rooted then i start messing with system i turn off the device when i try to turn on got frozen in first logo .hard reset botton doesnt work my tablet charge normally when i click on power turn onjust in first logo nothing more
i did something more i unistall cdc and android when i use usb in pc i did that
now i cant make the pc reconized my device show device mtp usb-.
sry my poor poor english.
you can try hand reset options
power button +volume up
or power +volume down try this.... I'm a lenovo tab user a1207 check this way,
i did but nothing happens still stuck on first logo
JewelAhosan001 said:
you can try hand reset options
power button +volume up
or power +volume down try this.... I'm a lenovo tab user a1207 check this way,
Click to expand...
Click to collapse
i did but nothing happens still stuck on first logo
check this tutorial ......
veronicca said:
i did but nothing happens still stuck on first logo
Click to expand...
Click to collapse
fist you try
Press the "reset" button on your device
- Press and hold for a 3 sec. "power" button on your device (after 3 sec. releas the buton)
- When you see "lenovo" logo press and hold vol+ and vol- untill you will boot in to CWM Recovery mode
In a CWM Recovery Mode
Menu down = vol-
Menu up= vol+
accept= power button
1. Choose "wipe data/factory reset"
2. Choose "wipe cache partition"
this funtion not open.... you can see down link
check this link....... see post carefully think you solved your problem
. click here
HELP! Blue Wave 8 33GT tablet stuck in recovery mode with "No command" message
I got my Blue Wave 8 33GT (not HD+) tablet completely bricked. First of all, I know this is not really a popular device and some of you might not have a single knowledge about this one, but I hope in any way you might help me get this device working again. Thank you in advance!
Some info about this device:
Bluewave's website: Wave 8
Android OS version: 4.4 KitKat
Device processor: Rockchip-based (RK31)
What just happened? It suddenly reboots while I'm playing and gone into recovery mode with an Android and a "No command." message. Now it won't boot the system anymore whenever I reboot, it always going into this recovery mode.
It has no volume buttons, just a reset, a hard back button and power button. Holding down the power and back button goes into the recovery mode directly. Through normal boot, it flashes the Bluewave logo twice then goes into the recovery. While the reset button immediately turn the device off. There's nothing else I can think of that I can do in this case.
My laptop can recognize it as an ADB Device in recovery mode and I think I may be able to flash it via Rockchip BatchTool, but the instructions I've read states that the device should be up and with a USB debugging enabled which I am not currently able to do in recovery mode. Device is rooted and working totally fine until this happened.
Anyone got into this kind of problem and able to go through it? Please, any help is greatly appreciated.
P.S
Just let me know if there are any additional info I could give you.
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
AutomaticSearches said:
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
Click to expand...
Click to collapse
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Humble Potato II said:
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Click to expand...
Click to collapse
May be this site help: http://bluewave-global.com/wave_8.php#frame4
"Long press the power button to restart the device. If restarting fails, hard reset the tablet by poking the Reset hole using a pin. " it is from FAQ
maybe this could help.
1. Press the power button to get the option menu for
Power off
Reboot
Silence phone option.
2. on that menu you have to hold down that power off option on your touch screen while also holding down the home push button on the side of your tablet.
3. This brings up a screen to reboot into safe mode..(these are the 3 steps the company does not tell you that is why no one gets it to work.
4. HIt yes for safe mode and then hold down your power and home buttons on side of tablet till the dopo Logo appears.
5. Release both buttons and hit the power button one time and then hold only the home button down till a menu option appears.
6. Use the home button to move down to factory reset and press the power button to select. Once it says complete then use the power button to select reboot.
Problem solved. Hope this will help everyone out.
The only way is to remove the battery, attached again the battery then power it on their is no hard reset on blue wave the go to settings factory reset