Hi...
i want to know if is possible unbrick this phone. I've already tried:
- KDZ Flash (LG Flash Tool 2014), can't downlaod the lastest KDZ firmware for it because the page doesn't exist anymore, so i just dowloaded a previous version. Then when it start the upgrade procedure an error ocurred: "Upgrade stop due to an error"
- With the LG original mobile tool.
P.S. My phone was rooted before the brick.
Thanks!
undon3 said:
Hi...
i want to know if is possible unbrick this phone. I've already tried:
- KDZ Flash (LG Flash Tool 2014), can't downlaod the lastest KDZ firmware for it because the page doesn't exist anymore, so i just dowloaded a previous version. Then when it start the upgrade procedure an error ocurred: "Upgrade stop due to an error"
- With the LG original mobile tool.
P.S. My phone was rooted before the brick.
Thanks!
Click to expand...
Click to collapse
Have you downloaded the lg mobile united drivers, because without it the flash tool will not flash the firmware You can download the drivers from the following url
http://www.mediafire.com/download/g31hbcdmh14io89/LGUnitedMobileDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3.exe
And if you have missed some step you can see from the following url
http://forum.xda-developers.com/optimus-l3-l5-l7-l9-ii/general/method-unbricking-lg-l5ii-t3056008
Related
Im trying to flash kdz to lg p769 to unbrick it, i get this error
how do i fix this? please help
So you have already installed JB before, and is now soft bricked (not able to boot)? In that case, the only option is to fastboot, and use fastboot to write back ICS U-boot and X-loader.
Follow this link: http://forum.xda-developers.com/showpost.php?p=41768774&postcount=1
After you are done with this, you should be able to flash kdz again.
I bricked my phone while trying Artas's AOSP 5.0
I was suggested to use Lelus's method and flash u-boot and xloader
The fastboot method was not working for me as i couldnt get the drivers to work with win8.1
Proceeded with this tool as follows:
Download and setup LG Driver
Download LG Flash Tool 2014 tool and extract
Enter S/W Upgrade Mode and connect phone to PC ( Turn off phone and press volume up )
Run LGFlashTool2014.exe
View attachment 3029691
Tool has two flash modes
[A]Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
[*]I used CSE Flash to unbrick alongwith V20C_00.kdz for P765
[*]Settings Used for the same
View attachment 3029695
[*]Press start
View attachment 3029699
[*]Press ok
View attachment 3029703
[*]Tool Progress
View attachment 3029710
The tool is in some other language( not english ) hence the ????????????
[*]Wait till 100% of each individual of the Four steps is completed
[*]Cheers you are done with it.................
PS:
I think it may work with other versions of L9
Someone reported it to be working with P760 v20h too....
Credits :-
@quangnhut123
everything else works, but it dont find my phone... any succestions?
On which windows version did you try this? Because I have windows 10 .. it's not working ..P765..On lollipop by ramrar..
Windows 8....will work with win7 too
install lg drivers
2012katas said:
I bricked my phone while trying Artas's AOSP 5.0
I was suggested to use Lelus's method and flash u-boot and xloader
The fastboot method was not working for me as i couldnt get the drivers to work with win8.1
Proceeded with this tool as follows:
Download and setup LG Driver
Download LG Flash Tool 2014 tool and extract
Enter S/W Upgrade Mode and connect phone to PC ( Turn off phone and press volume up )
Run LGFlashTool2014.exe
View attachment 3029691
Tool has two flash modes
[A]Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
[*]I used CSE Flash to unbrick alongwith V20C_00.kdz for P765
[*]Settings Used for the same
View attachment 3029695
[*]Press start
View attachment 3029699
[*]Press ok
View attachment 3029703
[*]Tool Progress
View attachment 3029710
The tool is in some other language( not english ) hence the ????????????
[*]Wait till 100% of each individual of the Four steps is completed
[*]Cheers you are done with it.................
PS:
I think it may work with other versions of L9
Someone reported it to be working with P760 v20h too....
Credits :-
@quangnhut123
Click to expand...
Click to collapse
the tool does not show cse flash mode
pls help
app freak said:
the tool does not show cse flash mode
pls help
Click to expand...
Click to collapse
It should
Wrong version of the tool. The official one from LG has no settings at all and works only online, but was always my road to success. Then there seem to be more than one versioj of the LG Flash Tool on XDA, the 2014 version should have it.
2012katas said:
It should
Click to expand...
Click to collapse
but it is not pls help
2012katas said:
It should
Click to expand...
Click to collapse
I Rectified the problem
now it is showing
i am trying to flash
Now the tool says that usb is not connected !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
What should i do !!
it cant go next 60%
what to do???
nice thank you yours share idea,.. tanks you so much,..
While i was downgrading my osftware to p710 joly bean i had stuck in emergeny mode.When lg flash tool start extracting .kdz file window pops and said "Failled to connect to server" Doeas anyone know problem ????
Adocrafter said:
While i was downgrading my osftware to p710 joly bean i had stuck in emergeny mode.When lg flash tool start extracting .kdz file window pops and said "Failled to connect to server" Doeas anyone know problem ????
Click to expand...
Click to collapse
Ignore all errors. Just start the flashing process and DO NOT touch anything.
If you just want to have rooted KK, follow this guide. No need to downgrade to JB if you want root. Just make sure you flash the latest twrp after you flash the pre-rooted kdz.
Second problem
shhnedo said:
Ignore all errors. Just start the flashing process and DO NOT touch anything.
If you just want to have rooted KK, follow this guide. No need to downgrade to JB if you want root. Just make sure you flash the latest twrp after you flash the pre-rooted kdz.
Click to expand...
Click to collapse
Sooo i downgrade my phone to joly bean with simular program but not same(because i was doing this before i read that) and now my lg logo freeeze do you know any sulutions what could i doo please (sorry i doesnt know that anyone will reply my post)
Hey there,
Recently my phone was bricked, I was reverting back to a stock ROM (which I did successfully, but when applying an official update through the phone, it bricked when rebooting). The only way I can unbrick my phone is by flashing with a KDZ file for the model (Using LGFlashTool2014). However, there is no KDZ file for that specific model.
Can someone help me
Edit! --- The model is a LG LS660
Hello
6 mont ago I flashed a rom on my lg g2 - fulmics 5.1. For some strange reason I chose that my device was a D855 and so my D802 is now stock in a bootloop and pops up in lg flash tools as a D855.
As the device registers as a D855 the 'lg flash tool' will not flash a D802 rom. Fastboot mode is not an option any more, only 'download mode' is available.
What can I do?
I was thinking that if I could somehow get a recovery (twrp) for D855 installed, I could reflash with a D802 rom. Is this possible through download mode? If so, how to do it then?
Thanks in advance. I hope some of you can help, as I really like the phone.
https://goo.gl/photos/h9ux4ohZKAyzjGAn9
https://goo.gl/photos/51r6goug11R2voDx9
With a little from another thread:
maozer said:
Try using the .dll found at http://forum.xda-developers.com/attachment.php?attachmentid=2473543&d=1387955530
Just flash your phone like you normally would, except you use the .dll linked above instead. Apparently the DLL linked above is a general LG G2 DLL that works for all models.
Note: When I flashed my phone, LG FlashTool gave me an error at the end of the flash process, but the flash was still successful.
Click to expand...
Click to collapse
THANK YOU!