:crying:Guys need a stock rom for canvas nitro a311 & also tell me its procedure to flash this rom plzz plzz plzz help me frnds........ Plz anyone?
balramkukreja said:
:crying:Guys need a stock rom for canvas nitro a311 & also tell me its procedure to flash this rom plzz plzz plzz help me frnds........ Plz anyone?
Click to expand...
Click to collapse
Step 1
STOCK ROM 4.4.2
PW: Moulnisky
LS.xD said:
Step 1
STOCK ROM 4.4.2
PW: Moulnisky
Click to expand...
Click to collapse
bro What is the procedure to flash this??? SPFlashTOOL??? or something else??
same problem
balramkukreja said:
:crying:Guys need a stock rom for canvas nitro a311 & also tell me its procedure to flash this rom plzz plzz plzz help me frnds........ Plz anyone?
Click to expand...
Click to collapse
Hai,
I am also facing the same problem. I have stock rom in .cpb format and unable to flash. Did you have any sollution now ?
thanks
:crying:
NAGAKUMAR said:
Hai,
I am also facing the same problem. I have stock rom in .cpb format and unable to flash. Did you have any sollution now ?
thanks
:crying:
Click to expand...
Click to collapse
balramkukreja said:
:crying:Guys need a stock rom for canvas nitro a311 & also tell me its procedure to flash this rom plzz plzz plzz help me frnds........ Plz anyone?
Click to expand...
Click to collapse
see all you need is the stock rom .
and ygdp tool
and should know how to use it too
here is the stock rom with YGDP tool
http://www.needrom.com/download/micromax-a311/
1. Get the upgrade driver files;
2. Power the phone off and connect it to the PC via the data cable of standard configuration; the driver is not installed if it is the first time of upgrade; please install the driver manually, and specify the installation path to the position where the driver is located;
3. After the upgrade driver is successfully installed, the device driver port can be seen in Device Manager:
4. Configuration of Upgrade Platform
Flash tool setup must install first
Click on Next > Next > Next to finish installation
Flash tool shortcut will available on Desktop
Once click on above icon , Below error will appear click close the program
Right click on icon and go to properties
Go to compatibility > Enable below shown “ Run this program in compatibility mode for :”Select system OS , Ex: window 7 > click on Apply > OK
Now double click on Flash tool icon, below screen will appear, Enter Password: 369
REAL FLASHING
1. CLICK ON CONFIG
2.you should have unzipped the STOCK ROM.rar by this time now .
3.select the cpd file you have unzipped
4.now on the side bar a lot of model numbers are there but select only 8297 w!
5.click apply
6.now click start on the main screen
7.now connect the phone while it is completely off and connected via USB
8.the phone would be automatically detected and flash would happen
9.it would go on 1005 complete
Upgrade Successful
if i helped press thanks
why we cannot use SP Flash tools??
yogesh.kalyana said:
see all you need is the stock rom .
and ygdp tool
and should know how to use it too
here is the stock rom with YGDP tool
http://www.needrom.com/download/micromax-a311/
1. Get the upgrade driver files;
2. Power the phone off and connect it to the PC via the data cable of standard configuration; the driver is not installed if it is the first time of upgrade; please install the driver manually, and specify the installation path to the position where the driver is located;
3. After the upgrade driver is successfully installed, the device driver port can be seen in Device Manager:
4. Configuration of Upgrade Platform
Flash tool setup must install first
Click on Next > Next > Next to finish installation
Flash tool shortcut will available on Desktop
Once click on above icon , Below error will appear click close the program
Right click on icon and go to properties
Go to compatibility > Enable below shown “ Run this program in compatibility mode for :”Select system OS , Ex: window 7 > click on Apply > OK
Now double click on Flash tool icon, below screen will appear, Enter Password: 369
REAL FLASHING
1. CLICK ON CONFIG
2.you should have unzipped the STOCK ROM.rar by this time now .
3.select the cpd file you have unzipped
4.now on the side bar a lot of model numbers are there but select only 8297 w!
5.click apply
6.now click start on the main screen
7.now connect the phone while it is completely off and connected via USB
8.the phone would be automatically detected and flash would happen
9.it would go on 1005 complete
Upgrade Successful
if i helped press thanks
Click to expand...
Click to collapse
I have tried some custom roms and found volume up buttons and proximity sensor issue so flashed with ygdp stock rom but still i am facing proximity problem.
the bug !
rohitjaiswal said:
I have tried some custom roms and found volume up buttons and proximity sensor issue so flashed with ygdp stock rom but still i am facing proximity problem.
Click to expand...
Click to collapse
the bug is only there if you use a310 rom on a311 that is why you need to use a311 cpb Rom only
Still flashing A311 Stock Rom
yogesh.kalyana said:
the bug is only there if you use a310 rom on a311 that is why you need to use a311 cpb Rom only
Click to expand...
Click to collapse
After flashing A311 Stock on A311 device is not solving proximity sensor bug only. rest of it everything is working.
I have tired with some sites given u and others.
http://www.needrom.com/wp-content/uploads/2015/02/Micromax-A311.rar ==== Needrom Link
www.mediafire.com/download/ofea46fgqhci438/www.moulnisky.com_4.4.012.P1.141110.8297W_I02.rar==== Mediafire Link.
I believe these two links for Stock A311 so i have flashed these . It shows me Custom id as MICROMAX A311.
I am so confused here and struck.
i replied to this
rohitjaiswal said:
After flashing A311 Stock on A311 device is not solving proximity sensor bug only. rest of it everything is working.
I have tired with some sites given u and others.
http://www.needrom.com/wp-content/uploads/2015/02/Micromax-A311.rar ==== Needrom Link
www.mediafire.com/download/ofea46fgqhci438/www.moulnisky.com_4.4.012.P1.141110.8297W_I02.rar==== Mediafire Link.
I believe these two links for Stock A311 so i have flashed these . It shows me Custom id as MICROMAX A311.
I am so confused here and struck.
Click to expand...
Click to collapse
i replied to this in another thread
yogesh.kalyana said:
see all you need is the stock rom .
and ygdp tool
and should know how to use it too
here is the stock rom with YGDP tool
http://www.needrom.com/download/micromax-a311/
1. Get the upgrade driver files;
2. Power the phone off and connect it to the PC via the data cable of standard configuration; the driver is not installed if it is the first time of upgrade; please install the driver manually, and specify the installation path to the position where the driver is located;
3. After the upgrade driver is successfully installed, the device driver port can be seen in Device Manager:
4. Configuration of Upgrade Platform
Flash tool setup must install first
Click on Next > Next > Next to finish installation
Flash tool shortcut will available on Desktop
Once click on above icon , Below error will appear click close the program
Right click on icon and go to properties
Go to compatibility > Enable below shown “ Run this program in compatibility mode for :”Select system OS , Ex: window 7 > click on Apply > OK
Now double click on Flash tool icon, below screen will appear, Enter Password: 369
REAL FLASHING
1. CLICK ON CONFIG
2.you should have unzipped the STOCK ROM.rar by this time now .
3.select the cpd file you have unzipped
4.now on the side bar a lot of model numbers are there but select only 8297 w!
5.click apply
6.now click start on the main screen
7.now connect the phone while it is completely off and connected via USB
8.the phone would be automatically detected and flash would happen
9.it would go on 1005 complete
Upgrade Successful
if i helped press thanks
Click to expand...
Click to collapse
When I am trying to flash this is what happening and ygdp tool stucks at cell1 for hours and never goes ahead :
01:28:48 User selected Device: 8297W
01:28:48 User selected CPB file: C:\Users\Dhan\Downloads\Compressed\Micromax-A311\4.4.012.P1.141110.8297W_I02.CPB
01:28:48 Start to verify CPB file ...
01:28:48 Checking CPB file...
01:28:48 Get CPB version ...
01:28:59 Unzip files ...
01:29:12 Get FileList File...
01:29:12 Unzip police files ...
01:29:13 Check CPB file ok
01:29:13 Verify data file OK!
01:29:18 Entering download mode...
01:29:22 Cell 0 USB address is: com3
01:29:22 CELL0 detects device connected...
it is ok!
dhan1 said:
When I am trying to flash this is what happening and ygdp tool stucks at cell1 for hours and never goes ahead :
01:28:48 User selected Device: 8297W
01:28:48 User selected CPB file: C:\Users\Dhan\Downloads\Compressed\Micromax-A311\4.4.012.P1.141110.8297W_I02.CPB
01:28:48 Start to verify CPB file ...
01:28:48 Checking CPB file...
01:28:48 Get CPB version ...
01:28:59 Unzip files ...
01:29:12 Get FileList File...
01:29:12 Unzip police files ...
01:29:13 Check CPB file ok
01:29:13 Verify data file OK!
01:29:18 Entering download mode...
01:29:22 Cell 0 USB address is: com3
01:29:22 CELL0 detects device connected...
Click to expand...
Click to collapse
you need to connect the phone after it says entering download mode
U r a lifesaver bro !!!!
:d:d:d:d:d:d:d:d:d:d:d:d:d:d:d:dthanks tthanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks hanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks
BRO I HAVE MY OWN THREAD EXPLAINING HOW TO FLASH STOCK ROM AND WHAT U NEED FOR IT .....
GO TO http://forum.xda-developers.com/a310/help/soft-bricked-a310-3311-internal-storage-t3158012
Stucked at "Entering download mode"
i had tried to unbrick my nitro a311 with YGDP tool..
but it stucks at "ENTERING DOWNLOAD MODE"..
drivers are properly installed... but it always goes to charging whenever we connect it...
i tried connecting with battery .. without battery.. but no luck
I am Benjamin Barla from Assam new in XDA
I have downloded A311 Stock ROM & A311 driver from xdafirmware.
And I have problem to install A311 driver. I have not found any vcom folder or driver.
In A311 driver.zip I found ADB USB Driver & Driver folder it contains inf, sys, cat etc. files. What I need to do with these files?
and How to manually upgrade driver in Device manager (PC), what file I need to choose?
Please help me to install A311 driver correctly.
Thanks
it stops when entering download mode!
device model A311.. stops after start in download mode! doesnt proceed!! help please!!my phone enters custom recovery! only wha should i do!! i lost my imei baseband version by flashing blisspop rom!!
help me
any body!!
you got this done!!
yogesh.kalyana said:
you need to connect the phone after it says entering download mode
Click to expand...
Click to collapse
not working for me! too not proceeding further after device detected help me!!!
which windows are you using?
@balramkukreja here is stock rom for a311 twrp flashable.... so no need to use ygdp tool if you have rooted and custom twrp recovery
http://forum.xda-developers.com/a310/orig-development/rom-twrp-flashable-micromax-canvas-t3287008
Bhushan1985 said:
@balramkukreja here is stock rom for a311 twrp flashable.... so no need to use ygdp tool if you have rooted and custom twrp recovery
http://forum.xda-developers.com/a310/orig-development/rom-twrp-flashable-micromax-canvas-t3287008
Click to expand...
Click to collapse
Thanks for recovery flashable rom..
But now i use to do a nandroid backup before flashing any rom.
Related
Flash pure stock rom.
Unbrick guide for canvas nitro..
First of all you need to download stock rom.
Download stock rom from here..
For A310 users: mod edit - link removed
For A311 users: mod edit - link removed
Download ygdp assemble from here: mod edit - link removed
Download drivers from here: mod edit - link removed
### For windows 8 users: ###
1. Go to the windows charm bar/settings/change pc settings/general/scroll to advanced start up. It will reboot.
2. Press trouble shoot/advanced/startup../ restart special option../press 7 (disable driver..)
3. It will boot you normally to windows but now u can install unsigned drivers.
### Now windows 8.1 users. ###
1. Go to the windows charm bar/settings/change pc settings/Update and recovery/recovery/ scroll to advanced start up and click restart now..
2. Press trouble shoot/advanced/start up settings/ restart.
3. Press 7.
4. It will boot you normally to windows but now u can install unsigned drivers like Vcom.
5. Open device manager..
If u r windows 7 or window xp users. Advanced start up ur pc. Then select disable driver signature enforcement.
### Now all users follow this... ###
after downloading the firmware u can find Drivers folder.
x86(32bit) os users, double click on "For windows32bit.exe,
x64bit users, double clickon "for windows64bit.exe,
click install unsigned drivers any way.
Now you can flash ur device with ygdp or sp flash tool...
1.. Open ygdp assembly. Enter password. 369
if latest ygdp noneed to configure just select the cpb file.
2. Click on config button.
3. Choose your phone (8297w_I01).
4. Select CPB file u downloaded.
5. apply your selection.. Wait few minutes for your rom unpack.
6. Click on start button.
Turn off ur mobile . connect your mobile.
Firmware downloading starts automatically. It takes some time to finish..
I got this guide from modaco..
I only changed some drivers process...
Don't blame me if any thing went wrong..
press thanks if i helped..
dead download liks are updated
Download links are updated
thanks
Bro mt65xx preloader disappears within 2-3 secs
Help me please
Phone always disconnected in the middle of CPB download process (at 98% to be precise)..
Probably it was caused by the phone that registered as MediaTek PreLoader USB VCOM Port in Device Manager. Some say, it has to be registered as MediaTek DA USB VCOM Port, but I couldn't figure it out how to change that. Any suggestion?
put your pc, in advanced start up, driver signature enforcement. then install drivers..
Download links updated, Drivers link added
Bro I tried to remove twrp img. by flashing it 2 times and now its bricked.. So should i follow ypur given forum
Parth_Panjwani said:
Bro I tried to remove twrp img. by flashing it 2 times and now its bricked.. So should i follow ypur given forum
Click to expand...
Click to collapse
u can follow my guide..
There are 3 links for stock firmware.. Which one should i download??
Saif Solkar said:
Bro mt65xx preloader disappears within 2-3 secs
Click to expand...
Click to collapse
Bro Did u solved this issue.
My phone is having the same issue
---------- Post added at 05:19 AM ---------- Previous post was at 05:13 AM ----------
Hello guys,
my micromax a311 is not woking . When i keep charging it will automatically starting the boot loop. And there is no option to go to the recovery mode.
I have tried the YDGP tool but when i start the flashing the device is disconnected and then connecting. Iam unable to flash the rom.
I also tried flashing the recovery using sp flash tool . It is giving me an error (S_BROM_CMD_JUMP_DA_FAIL (2005).
What is the possible solution for it.
thread closed until the download links will be available
Sometimes your phone won't boot or got stuck in boot logo. This problems may occurs when:
1. Your device was rooted then you OTA update it . (When you root your device your warranty is void and your service provider have nothing to do with you, you're on your own now so don't update it.)
2. You've flashed/installed something that prevents your device from booting normally.
You can fix some issues with this tutorial
1. Fix bootloop
2.System Ui error
3.Phone not booting but detected by computer
4.Forgotten lockscreen pin/password (<< but there must be alternative way for this)
Tools Needed
SP_Flash_Tool_v5.1352.01
Mediatek MT65xx Preloader Driver - so the sp flash tool can detect your device
Cloudfone Geo 402q Firmware >> info:
Rooted with SuperSU
Smart keyboard Pro as system keyboard
Lollipop Fonts
odexed rom (partially touched stock rom just the fonts and keyboard)
I recommend 32bit windows os for sure compatibility of driver
Installing driver MTK Preloader
1. Turn off your device or simply remove the battery just to make sure.
2. Press volume up or down or both buttons.
3. Insert the usb cable from your computer to your device, it will install automatically drivers.
If your computer can't detect it or can't automatically download drivers,
Go to control panel > hardware and sound > (under devices and printers) click device manager.
It will show the unknown device .
(assuming that, thats the unknown device but yours will be different icon but its on the same process to install the driver)
Install it manual. Right click unknown device Icon,
then properties then update driver software.
"Choose Browse my computer for driver software"
Manually find the extracted folder of Mediatek preloader driver
and choose the folder containing the driver,
just wait and windows will install it ...
Flashing Procedure:
1. Extract the firmware you have downloaded
2. Launch the SP Flash tool (flash_tool.exe).
3. Click the scatter loading choose the android scatter.
4. Flash tool will load the scatter file .
5. Click download.
6. Turn off your phone or just pull the battery,
you can flash it without battery.
press volume up, if you got error volume down plus power button
if didn't work maybe you are flashing this in different phone
Tipscloudfone geo 402q have chipset issue some tools detects it as MT8382 but it is MT6582)
but for me it didn't cause me a problem
7. Wait for the device to be detected, look at the status bar below of flashtool it will detect your device
wait for it to flash the rom and wait the green circle to appear. indication that flashing was done.
then boot your device!!! I hope this post helps you a lot.
just put a comment if you have any issue
Ad a "[FIX]" infront of the title, hopefully you'll help a lot of people, I am going to give you a thanks for this.
RAZERZDAHACKER said:
Ad a "[FIX]" infront of the title, hopefully you'll help a lot of people, I am going to give you a thanks for this.
Click to expand...
Click to collapse
thanks for the suggestion
sir
tanong ko lng po kung bakit ganun parin black screen parin cp ko ginwa ko nmn ung instruction nyo..tnx po
rjm010 said:
tanong ko lng po kung bakit ganun parin black screen parin cp ko ginwa ko nmn ung instruction nyo..tnx po
Click to expand...
Click to collapse
Please write/speak in English we're on global forums
maybe the uboot or boot wasn't installed that's why your phone not booting
did you notice that the uboot checkbox was unchecked?
as I remember in the scatter file the name of uboot.bin was lk.bin
try to edit the file name of uboot.bin to>> lk.bin or try to edit the scatter file lk.bin to>> uboot.bin
tell me if that worked
Good day bro! I have a problem with my cloudfone. I want to factory reset my phone but everytime I format it, there's nothing happen it always back on the same settings of my phone as in everything. But when I tried to flash this stock rom, there's nothing happen again. :crying: Is there any solution how to format my phone? Thanks bro!
bat po ganun na flash konman po ng ayus..stock padin po sa logo
i do the instruction but it doesnt work. iflash the rom successfully but stock on logo ,and ido change the lk.bin to uboot.bin, and itry to change back to lk.bin to uboot.bin. doesn't work..
anonymouse111 said:
i do the instruction but it doesnt work. iflash the rom successfully but stock on logo ,and ido change the lk.bin to uboot.bin, and itry to change back to lk.bin to uboot.bin. doesn't work..
Click to expand...
Click to collapse
Have you tried to wipe userdata? Also, give OP and other people more information about your device, such as modifications, android versions, what got you bricked etc.
Same problem and already wipe the user data and cache how i will do with it? pleaseee
ramiabouzahra said:
Have you tried to wipe userdata? Also, give OP and other people more information about your device, such as modifications, android versions, what got you bricked etc.
Click to expand...
Click to collapse
Same problem and already wipe the user data and cache how i will do with it? pleaseee
HELLO FRIENDS...
Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
This method will 100% works for both Lenovo a6000 and plus...
for this we need the following things....
Firmware-File
QPST Tool
and well working computer or Laptop..
Thing want to know before starting...
We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
We will use flash tool which already given in Firmware zip.
Let's Start...:laugh:
After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:
STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
then install QPST tool and run it. After opening it now close it.....Now again click on QcomDLoader.exe this time it will work:good:
then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)
STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...
Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...
This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage
To fix this install any custom rom..,:good:
This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....
NOTE:-after coming back to KitKat you may face the problem of boot loop for 7.x.x rom or some feature of the rom may not work..to overcome this problem follow this
download this twrp KitKat version(not so important) you can use cwm(not tested) and direct flash the lollipop rom which contain system.img file in it eg. vibe 2.5(tested and works) ,color os 3.1 or any rom which contain system.img and reboot.:good:
do not use any pach file for upgrading to lollipop do direct flash lollipop rom.
I hope this will also work for you...
if this post help's you plz donate me on paytm...no 9763697739
if any problem occurs then please let me know..
Screen Short
This is my phone info after flashing it.....
this is not Lenovo a6000 this SS in of Lenovo a6000 plus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This after flashing custom Rom
soan0 said:
HELLO FRIENDS...
Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
This method will 100% works for both Lenovo a6000 and plus...
for this we need the following things....
Firmware-File(this is stock rom is for Lenovo a6000 but can be use for Lenovo a6000+)
QPST Tool
and well working computer or Laptop..
Thing want to know before starting...
We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
We will use flash tool which already given in Firmware zip.
Let's Start...:laugh:
After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:
STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
then install QPST tool and run it. After opening it now close it.....Now again click on QcomDLoader.exe this time it will work:good:
then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)
STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...
Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...
This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage
To fix this install any custom rom..,:good:
This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....
I hope this will also work for you...
if any problem occurs then please let me know..
Click to expand...
Click to collapse
For some people who dont get their phones detected need to open their motherboard and short the two points located beside memory card slot
The Hard Gamer said:
For some people who dont get their phones detected need to open their motherboard and short the two points located beside memory card slot
Click to expand...
Click to collapse
It can be told better with an image, if you can manage :-B
sasukay said:
It can be told better with an image, if you can manage :-B
Click to expand...
Click to collapse
Ok i wil try to find it
nice method thank you for sharing this will help many peoples....
MR.HACKER5476 said:
nice method thank you for sharing this will help many peoples....
Click to expand...
Click to collapse
yes bro i know how it feel when phone get brick...
The phone boots shows logo restarting and it keeps on restarting
chriselanko said:
The phone boots shows logo restarting and it keeps on restarting
Click to expand...
Click to collapse
install any custom rom or do factor reset
if you have done this above but still have the problem then answer my question
u r currently instead rom android version ?
is custom recovery is flashed?
do u have used any patch zip to upgrade or downgrade the android version ?
soan0 said:
install any custom rom or do factor reset
if you have done this above but still have the problem then answer my question
u r currently instead rom android version ?
is custom recovery is flashed?
do u have used any patch zip to upgrade or downgrade the android version ?
Click to expand...
Click to collapse
I am not able to acess recovery mode.
can enter fastboot but not recovery.
I have also attached the screenshot of final status while flashing.
I followed all steps .
bro its taking too much time what to do its tooked about 11 min and still okeep going
soan0 said:
HELLO FRIENDS...
Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
This method will 100% works for both Lenovo a6000 and plus...
for this we need the following things....
Firmware-File(this is stock rom is for Lenovo a6000 but can be use for Lenovo a6000+)
QPST Tool
and well working computer or Laptop..
Thing want to know before starting...
We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
We will use flash tool which already given in Firmware zip.
Let's Start...:laugh:
After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:
STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
then install QPST tool and run it. After opening it now close it.....Now again click on QcomDLoader.exe this time it will work:good:
then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)
STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...
Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...
This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage
To fix this install any custom rom..,:good:
This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....
NOTE:-after coming back to KitKat you may face the problem of boot loop for 7.x.x rom or some feature of the rom may not work..to overcome this problem follow this
download this twrp KitKat version(not so important) you can use cwm(not tested) and direct flash the lollipop rom which contain system.img file in it eg. vibe 2.5(tested and works) ,color os 3.1 or any rom which contain system.img and reboot.:good:
do not use any pach file for upgrading to lollipop do direct flash lollipop rom.
I hope this will also work for you...
if any problem occurs then please let me know..
Click to expand...
Click to collapse
its taking too much time and keep going what to doo
shivanshusuraj said:
its taking too much time and keep going what to doo
Click to expand...
Click to collapse
which buttons u have pressed at the start
bro turn off u r phone then remove u r sim and memory card (not necessary) then press and hold volume + and volume - (don't touch power button )together till u feel a soft vibration then only connect to u r pc
yes i remover all things no sim no memory and i hode both volume key then plug usb
soan0 said:
which buttons u have pressed at the start
bro turn off u r phone then remove u r sim and memory card (not necessary) then press and hold volume + and volume - (don't touch power button )together till u feel a soft vibration then only connect to u r pc
Click to expand...
Click to collapse
yes i remover all things no sim no memory and i hode both volume key then plug usb and then it vibrate and connected but its took 23 min but not done then i remover usb directly
chriselanko said:
I am not able to acess recovery mode.
can enter fastboot but not recovery.
I have also attached the screenshot of final status while flashing.
I followed all steps .
Click to expand...
Click to collapse
bro now u can flash custom recovery i.e TWRP,CWM as par u r android version
i think u know that how to do ..if not then plz check how to flash twrp or cwm in Lenovo a6000
shivanshusuraj said:
yes i remover all things no sim no memory and i hode both volume key then plug usb and then it vibrate and connected but its took 23 min but not done then i remover usb directly
Click to expand...
Click to collapse
u r drivers are install properly plz check which phone do u have
if u have serious problem then whatsapp me 9763697739
shivanshusuraj said:
yes i remover all things no sim no memory and i hode both volume key then plug usb and then it vibrate and connected but its took 23 min but not done then i remover usb directly
Click to expand...
Click to collapse
if it possible to format u r pc then do it and again do all the step if not then try this hole guide in u r friend pc
Still Bootlooping / no recovery
soan0 said:
bro now u can flash custom recovery i.e TWRP,CWM as par u r android version
i think u know that how to do ..if not then plz check how to flash twrp or cwm in Lenovo a6000
Click to expand...
Click to collapse
1) Flashed Sucessfully the given frimware using the tool in the folder.
2) Phone still in boot loop.
3) Tried to flash Twrp image you mentioned in this thread, it flashed sucessfully but cannot able to acess recovery by hardware button combinations or by any means.
4)Tried Flashing Vibe 2.5 Lollipop ROM using fastboot ( using command fastboot update E:\vibe.zip ). It showing errors like
" archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
"
5) Please help me with this and tell me where was I wrong. Am not a PRO, just a beginner So please give detailed instructions if am wrong. Thank you @soan0
chriselanko said:
1) Flashed Sucessfully the given frimware using the tool in the folder.
2) Phone still in boot loop.
3) Tried to flash Twrp image you mentioned in this thread, it flashed sucessfully but cannot able to acess recovery by hardware button combinations or by any means.
4)Tried Flashing Vibe 2.5 Lollipop ROM using fastboot ( using command fastboot update E:\vibe.zip ). It showing errors like
" archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
"
5) Please help me with this and tell me where was I wrong. Am not a PRO, just a beginner So please give detailed instructions if am wrong. Thank you @soan0
Click to expand...
Click to collapse
Bro after flashing wait for few min it take time to boot up
And try to flash vibeui 2.5 by twrp which i have given the link if still have a problem then whatsapp me or call so that i can understand u r problem correctly
9763697739
soan0 said:
Bro after flashing wait for few min it take time to boot up
And try to flash vibeui 2.5 by twrp which i have given the link if still have a problem then whatsapp me or call so that i can understand u r problem correctly
9763697739
Click to expand...
Click to collapse
After flashing , i just power on the device and left it. it just keeps on restarting. (ie what i mentioned as boot loop).
I cannot acess TWRP then how can i flash vibe 2.5 using it.
Sry I didnt get you, I send the video of the phone in your whatsapp number.
even using " fastboot boot twrp.img" command it is showing sucessful in cmd promt but while device keeps restarting
chriselanko said:
I am not able to acess recovery mode.
can enter fastboot but not recovery.
I have also attached the screenshot of final status while flashing.
I followed all steps .
Click to expand...
Click to collapse
If you can't enter recovery your simplest method would be flashing recovery through fastboot mode..
Hi everyone so ive ran out of place to look for help .. I have a Lenovo device which is PB2-650M so i accedentaly bricked it it doesnt boot anymore and charge but can detected by pc .... So i have a stockrom i try to flash it but an error pops up and says "This is a secure baseband chip" and then it ask for a .auth file but i cant find it anywhere i hope someone would be able to help me .. I feel really heart broken about this. Thankyou.
I've found the solution:
http://forum.gsmhosting.com/vbb/f958/lenovo-pb2-650m-rom-frp-2243334/#post12590583
Sure, all you need to do is download correct ROM package,
altogether with SPFlashTools, drivers, instead of using rom's from some stupid sites and noob forums.
Download : PB2-650M_S038_170228_ROW Full ROM package
pass: lenovo-forums.ru
Procedure :
- Unpack All
- Install drivers from \Drivers folder
- Start SPFT
- Click download agent and select "DA_SWSEC_CRYPTO20_0403.bin"
- Press CTRL + ALT + S
- Click auth file and select "auth_sv5_98998_philip.auth"
- Click Scatter loading and select scatter from \SW\target_bin
- Press Download and connect powered off device to usb cable
- Wait for finish.
Post results.
b.r.
Alex
Click to expand...
Click to collapse
Need Help!! Realme 1 stuck at Orange State Your phone is Unloaked & no longer secured
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
did you update your device with latest update before doing root?
are you able to go to recovery mod ? if yes
format your device and see..
abhi.s4u said:
did you update your device with latest update before doing root?
are you able to go to recovery mod ? if yes
format your device and see..
Click to expand...
Click to collapse
Yes it was updated to the Latest version. In recovery mode i see only Reboot, Turn off and Wipe data option i tried each one of them but as soon as phone start the same loop start again.
help
same problem bro please anyone can provie full backup without using of oppo download tool as it requires staff account :crying:
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
Bro Provide me your whatsapp number as only be can help each other for fixing realme 1
need help asap
mine too same problem.. wiped data tried installing ota using sd card but no success finally installation failed,again I tried online updating via Wi-Fi it shows no downloadable version detected tried flashing .ofp firmware without any luck it shows encod data checksum error,incorrect scatter file format bla bla bla.. I'm tired of this ****.. gys plez help
Same here..tried flashing using download tool but cnt,,any help appreciated
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
abhi.s4u said:
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
Click to expand...
Click to collapse
Hello, I am not able to download the files from the mega link, Its not loading, and when I open the link with VPN, it says wrong decryption key, Can you please upload the files to Google Drive or something else?
adityadtr said:
Hello, I am not able to download the files from the mega link, Its not loading, and when I open the link with VPN, it says wrong decryption key, Can you please upload the files to Google Drive or something else?
Click to expand...
Click to collapse
sorry bro i don't have backup of links...
go through this link u have to
download whole stock rom... i haven't tested it so do it on your own risk..
Mod edit: Link removed
Hello, I know i'm a bit late on this I had this problem recently and found out that flashing the latest ota update gets rid of the problem. The message wont disappear but the phone will boot properly. Just download the latest OTA update from the realme website and put it in you sd card and flash it from recovery. Also protip everytime you flash a file reboot manually not from adb fastboot as that leads to the bootloop.
Hope it helps.
after downloading latest OTA from realme website and tried flashing using recovery mode. installation failed is showing? sombody help!
---------- Post added at 06:31 PM ---------- Previous post was at 06:21 PM ----------
bidhan001 said:
mine too same problem.. wiped data tried installing ota using sd card but no success finally installation failed,again I tried online updating via Wi-Fi it shows no downloadable version detected tried flashing .ofp firmware without any luck it shows encod data checksum error,incorrect scatter file format bla bla bla.. I'm tired of this ****.. gys plez help
Click to expand...
Click to collapse
mine same problem, did you solved the problem now?
please help if sombody has working solution/method, let me know. my realme 1 also facing same problem and tried flashing latest OTA update from official site but no luck showing installation failed:crying::crying:.
abhi.s4u said:
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
Click to expand...
Click to collapse
Hey, I'm having the same problem, orange state bootloop. The mega links need paid account, while sp flash tool doesnt recognize the device. I am yet to find a version of the rom which has the scatter file. Miracle doesnt work because of the mega links. I am able to go to stock recovery, however, sd card installation says "installed version is older than current one" while wifi says no update available. Any help would be much appreciated.
StripsOfTatti said:
Hey, I'm having the same problem, orange state bootloop. The mega links need paid account, while sp flash tool doesnt recognize the device. I am yet to find a version of the rom which has the scatter file. Miracle doesnt work because of the mega links. I am able to go to stock recovery, however, sd card installation says "installed version is older than current one" while wifi says no update available. Any help would be much appreciated.
Click to expand...
Click to collapse
ok i hv find this video.. plz check
Mod edit: Link removed
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
Bro I have the same problem please help if u fixed it in phone when I opening the recovery mode it showing"Oppo verify pass fastboot_unlock_verify ok".
How to fix it bro
realme 1 problem
plz help me i cannot get into recovery mode on realme 1 and it is stuck in logo and orange state and restart over and over
I have same problem when i gone to REALME service centre they told me that we can not fix this because it is root and they were saying it can charge 5000-6000rs for motherboard and they said that it may be not work (Realme 1)
my phone is stuck on boot screen and i can not booting in recovery mod
what can i do please help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
please!please!please!please!please!please!please!please!please!please!please!please!please!please!please!please
same problem on realme u1
what should I do?
ASHISH12345677 said:
Bro Provide me your whatsapp number as only be can help each other for fixing realme 1
Click to expand...
Click to collapse
my number 7999809456 plzz help me out i am ready to pay u plzz
SarvinBatra said:
Yes it was updated to the Latest version. In recovery mode i see only Reboot, Turn off and Wipe data option i tried each one of them but as soon as phone start the same loop start again.
Click to expand...
Click to collapse
I was unlocked bootloader of Realme c2 and installed twrp patched file. Successfully installed. Now i unable to go to recovery mod. Showing ''5 second to reboot." And "Oppo verify pass ok". Please help me.