DISCLAIMER:-I'm not responsible for bricked or problems arising from this fix do this at your own risk.
It's rather simple. Just follow the steps.
Pre-requisites:-
1.Rooted and unlocked bootloader.
3.ES file explorer with root access.
4.Stock kernel
5.Brains.(if you missed that there was '2' missing)
Method:
Open ES FILE explorer.
Go to 'device /'
Set path / and /system to rw from ro in mount rw menu
open system
open etc
scroll down till you find 'mixer_paths.xms'
open it with ES note editor
find and edit
<ctl name="RX3 Digital Volume" value="84" /> SET VALUE TO 91 From 84
scroll down
find and edit
<ctl name="Speaker Boost" value="DISABLE" /> CHANGE IT TO "ENABLE"
press the arrow on top left and save. then reboot
and dont forget to thank.
oemaritradey said:
It's rather simple. Just follow the steps.
Click to expand...
Click to collapse
This is just an temporary workaround. Do this on your own risk. However, i have been using value 89 for RX3, no issues so far.
This thread should be on General section, Mods please move it.
Sent from my AO5510 using XDA Free mobile app
Cant Attend/Dial call after changing values
I changed the values as per your Post but now i m unable to recieve and call.Its hanging on calling screen.
I cant hear any voice too.
I restored the original mixer_paths.xml but the issue is still there
i have rebooted and cleared dalvik/cache too.but issue is still there.
Please help
farzii said:
I changed the values as per your Post but now i m unable to recieve and call.Its hanging on calling screen.
I cant hear any voice too.
Please help
Click to expand...
Click to collapse
did you reboot the phone?
tell me exactly what you did.
oemaritradey said:
did you reboot the phone?
tell me exactly what you did.
Click to expand...
Click to collapse
Did exactly what u said in OP.
went to system/etc/mixer_paths.xml changed values of RX3 to 91 and changed speaker boost to ENABLED.
Rebooted.
Since then i m unable to pick up calls and dial calls.Call screen comes but when i drag the phone icon to green/Red icon it hangs there itself
farzii said:
Did exactly what u said in OP.
went to system/etc/mixer_paths.xml changed values of RX3 to 91 and changed speaker boost to ENABLED.
Rebooted.
Since then i m unable to pick up calls and dial calls.Call screen comes but when i drag the phone icon to green/Red icon it hangs there itself
Click to expand...
Click to collapse
are you on stock kernel?
you need to be on stock rom as well as stock kernel. if you weren't then i cant guarantee things. use ES file explorer to change the permission to r/w from ro and change it back again as well.
if not reflash the stock rom.
oemaritradey said:
are you on stock kernel?
Click to expand...
Click to collapse
Yes
farzii said:
Yes
Click to expand...
Click to collapse
I hope you had root and unlocked bootloader.
2nd i pmd you a link to yuforums for a guide to reflashing stock rom hope it helps.
oemaritradey said:
I hope you had root and unlocked bootloader.
2nd i pmd you a link to yuforums for a guide to reflashing stock rom hope it helps.
Click to expand...
Click to collapse
Thanks,I have custom recovery and nandroid backup.I'll restore it.
farzii said:
Thanks,I have custom recovery and nandroid backup.I'll restore it.
Click to expand...
Click to collapse
well you should have done that before xD i have absolutely no clue what went wrong. i changed my value back just in case and rebooted and changed it back again. i didn't find that bug. :3 well cheerio.
Hi @oemaritradey,
This same method had worked on my previous smartphone (Redmi 1s), and expectedly, works on Yureka as well. I have published a detailed guide (and a video) based on this method on my blog here: http://www.droidiser.com/2012/04/rooting-your-android-device.html
Just thought it would make sense to post about it in this thread.
Thanks Man.. It worked for me
mythreya said:
Thanks Man.. It worked for me
Click to expand...
Click to collapse
you're welcome
Thnx bro worked for me also.....
HELP!!
I followed the guide and now there is no audio... I also set the original values back but the problem persists.... Phone is rooted... HELP!! Will factory reset fix this??
EDIT: Did a factory reset.. Still no audio! i am screwed!! HELP!!
I am also facing a similar issue post this fix. No Sound on the phone and cannot play music files.
I have already tried wiping Dalvik and Cache
sayak_life said:
I followed the guide and now there is no audio... I also set the original values back but the problem persists.... Phone is rooted... HELP!! Will factory reset fix this??
EDIT: Did a factory reset.. Still no audio! i am screwed!! HELP!!
Click to expand...
Click to collapse
OK I fixed the problem by reflashing stock rom.... Audio is working now...
oemaritradey,Thanks bro it's working....
Yes.. Its work properly. Its awesome.. Can we do same for camera also like improving photo quality or etc ???
Related
Hi, I have problem on my Samsung SGT5830(Galaxy ACE). When i reboot my phone i pups up message " The process com.android.phone has stopped unexpectedly. Please try afain" but it pups up ones or twice, and stop puping up... My phone after that, working whitout problems... I can receive calls, sms, mms. Also I can call, send sms, mms... I can connect on WiFi, GPS is working too... What is a problem? What can I do? How to do it?
I got this prob once when I flashed 2.3.3 for the first time. I got frustrated and did a factory reset u can try but use this as a last resort
extremecupavac said:
Hi, I have problem on my Samsung SGT5830(Galaxy ACE). When i reboot my phone i pups up message " The process com.android.phone has stopped unexpectedly. Please try afain" but it pups up ones or twice, and stop puping up... My phone after that, working whitout problems... I can receive calls, sms, mms. Also I can call, send sms, mms... I can connect on WiFi, GPS is working too... What is a problem? What can I do? How to do it?
Click to expand...
Click to collapse
if you are on stock rom and have cwm recovery installled then it have fix permissions which might help you... but i heard that on cm7 roms it will create more problems [haven't tried it personally].. on stock this option work perfectly
madman_amit said:
if you are on stock rom and have cwm recovery installled then it have fix permissions which might help you... but i heard that on cm7 roms it will create more problems [haven't tried it personally].. on stock this option work perfectly
Click to expand...
Click to collapse
Yes I have stock rom, only my phone is rooted. It was all good until i did a main restart, and after that it start to creating problem...
extremecupavac said:
Yes I have stock rom, only my phone is rooted. It was all good until i did a main restart, and after that it start to creating problem...
Click to expand...
Click to collapse
well then flash CWM from here http://forum.xda-developers.com/showthread.php?t=1168417 (v4)or here http://forum.xda-developers.com/showthread.php?t=1291327 (v5) anyway both of them works. Flash them from recovery then set permissions
can i fu*k up something on my phone whit that?
extremecupavac said:
can i fu*k up something on my phone whit that?
Click to expand...
Click to collapse
what you want to fu*k up with that??
madman_amit said:
what you want to fu*k up with that??
Click to expand...
Click to collapse
I mean can it something go wrong... Can i kill totaly my phone...
extremecupavac said:
I mean can it something go wrong... Can i kill totaly my phone...
Click to expand...
Click to collapse
nope you just need to have cwm installed and go to recovery --> advanced--> Fix permissions --> then reboot the phone
madman_amit said:
nope you just need to have cwm installed and go to recovery --> advanced--> Fix permissions --> then reboot the phone
Click to expand...
Click to collapse
I did that and it don't help...
Factory Reset
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
Factory Reset
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
do not help... after factory reset it start to send that message...
extremecupavac said:
do not help... after factory reset it start to send that message...
Click to expand...
Click to collapse
Yes! I know that is stgang, but....
just go to into recovery. wipe data and cache..
nicgoh said:
just go to into recovery. wipe data and cache..
Click to expand...
Click to collapse
how to do it.. step by step... i am not expert in those things...
extremecupavac said:
how to do it.. step by step... i am not expert in those things...
Click to expand...
Click to collapse
i am sure you can google... search things which that post said
PSM is now out and works on our devices all you need to do is install the Certificate by XxXPachaXxX
Download http://xxxpachaxxx.kleinrealms.com/?p=246
Download http://www.playstation.com/psm/store/en.html
Flash the Sony Package in TWRP or CWM, Only Install the Playstation Certificates
Reboot
Install APK
Login/Create Username
Rejoice!
If you go to arcade there is currently one FREE game
Note: As i said only install the playstation certificate, anymore can result in a bootloop or no boot
msfguard said:
Note: As i said only install the playstation certificate, anymore can result in a bootloop or no boot
Click to expand...
Click to collapse
Hello mate and thanks for posting the info.
When you say 'only install the playstation certificate', are you saying there's an option to pick what to install after you select the downloaded ZIP in TWRP / CW?
I really want to try this but I fear bricking my device if there's some other manual step required, such as modifying the ZIP prior to flashing from recovery.
Any additional information from you, or anyone who has applied this, would be greatly appreciated!
mroshaw said:
Hello mate and thanks for posting the info.
When you say 'only install the playstation certificate', are you saying there's an option to pick what to install after you select the downloaded ZIP in TWRP / CW?
I really want to try this but I fear bricking my device if there's some other manual step required, such as modifying the ZIP prior to flashing from recovery.
Any additional information from you, or anyone who has applied this, would be greatly appreciated!
Click to expand...
Click to collapse
Yes, The first screen ask you if you would like to install Bravia, Say No,Second is for playstation say yes!, third is xloud say no, then say stay in recovery dont let it reboot for u, reboot it after it closes aroma
Ill try to find time today to pull that certificate out, but its the only VERSION of the certificate ive gotten to actually work without constant forcecloses
Is it working on jb?
envoyé de puis mon Nexus s, aiiiiight ! (Michel rules the world)
ptr347 said:
Is it working on jb?
envoyé de puis mon Nexus s, aiiiiight ! (Michel rules the world)
Click to expand...
Click to collapse
Have only tried it on JB
Confirming it works !
THANKS !
Does it just work with root?
daxter19 said:
Does it just work with root?
Click to expand...
Click to collapse
i would assume so being that you must FLASH the permision thing
UltimateEnd said:
i would assume so being that you must FLASH the permision thing
Click to expand...
Click to collapse
I tried copying the two files from the zip to system/etc/permissions and system/frsmework and setting permissions on both to rwrr and i get the error code when starting the app. I'm not unlocked just rooted. I read on the other post about this that is all that needed to happen but no luck. It's there a way to tell from the zip what else i may need to do? I'm on JB as well.
Thanks
Brandon
bmathis said:
I tried copying the two files from the zip to system/etc/permissions and system/frsmework and setting permissions on both to rwrr and i get the error code when starting the app. I'm not unlocked just rooted. I read on the other post about this that is all that needed to happen but no luck. It's there a way to tell from the zip what else i may need to do? I'm on JB as well.
Thanks
Brandon
Click to expand...
Click to collapse
sorry i did not mean permission , (CERTIFICATE)
first download the the first file- , you should be able to download it straight from your phone, you said you are rooted ? make sure you have access to RECOVERY MODE - after your download, go in there, find the CERTIFICATE and FLASH IT . . . follow the steps given on here.
i did it twice to make sure it wasnt luck , and it worked great.
UltimateEnd said:
sorry i did not mean permission , (CERTIFICATE)
first download the the first file- , you should be able to download it straight from your phone, you said you are rooted ? make sure you have access to RECOVERY MODE - after your download, go in there, find the CERTIFICATE and FLASH IT . . . follow the steps given on here.
i did it twice to make sure it wasnt luck , and it worked great.
Click to expand...
Click to collapse
I tried one more time instead of flashing but doing it manually and the key was to completely power off instead of just rebooting. I don't know why but after that the PSM app quit erroring and works now. So it is possible to do it manually without flashing.
Side note, I tried to get into recovery and it gave me a dead android icon. I started with Power + Vol Down, chose the RCK icon and then it died. So I don't know what is up there. First time I had ever tried to get into recovery mode.
Thanks,
Brandon
Installation works as described!
But when I try to log in with my PSN credentials, I get a 'Deze service is niet beschikbaar in uw land/regio'. (This service is unavailable)
I live in Belgium. Will this be available in the future?
Or what can I do about this?
Thanks in advance.
Sent from my Transformer Prime TF201 using xda premium
Eskern said:
Installation works as described!
But when I try to log in with my PSN credentials, I get a 'Deze service is niet beschikbaar in uw land/regio'. (This service is unavailable)
I live in Belgium. Will this be available in the future?
Or what can I do about this?
Thanks in advance.
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
could be restriction on country atm
bmathis said:
I tried one more time instead of flashing but doing it manually and the key was to completely power off instead of just rebooting. I don't know why but after that the PSM app quit erroring and works now. So it is possible to do it manually without flashing.
Side note, I tried to get into recovery and it gave me a dead android icon. I started with Power + Vol Down, chose the RCK icon and then it died. So I don't know what is up there. First time I had ever tried to get into recovery mode.
Thanks,
Brandon
Click to expand...
Click to collapse
that means you probably just updated to JB, you need to flash a recovery
No luck for me.
Running JB rooted only, NOT unlocked.
Installed apk.
Copied .jar file and .xml to correct directories and changed permissions on the .jar to 644.
Shutdown and restart.
Error 8008103E when trying to open.
Any ideas where I went wrong?
Never mind, you have to change permissions on the .xml file to 644 also. The AndroidPolice instructions leave that part out.
Hello, I have a problem, I hope you can help a user,
To start updating the device and everything works perfect except that the phone is not locked for more than press the button.
Specific, I pressed the button, and the screen turns off, but if you press it again, the screen lights up but not in the blocking state, if not, on the desktop or wherever you leave the phone before (well either the browser, whatsapp, any game or whatever).
I tried changing the slide lock pattern, the password, and all, nothing works.
By having this problem, what ice was reinstall rom (including all wipes, and other steps) and nothing has changed. I've also tried installing a lower version of android (4.0.3 to be exact) to beams of odin, even in that version still does not work the screen lock ....
Since we no longer know what to do, I turn to you xD
PD:
I've noticed that others further back than indicated, the power button has lost the function that you had to if you were you kept pressed for a few seconds a menu will appear with options (off, airplane mode, reboot and some more) well now I see that menu, the phone goes directly.
Sorry about all this, but I need urgent help TT
Sorry for my bad English
And sorry again if I'm wrong in the place where I write this
Re: [Q] Power botton Isues
Try flashing JB leak.
My bet is you'll get your lockscreen back.
Sent from the little guy
gastonw said:
Try flashing JB leak.
My bet is you'll get your lockscreen back.
Sent from the little guy
Click to expand...
Click to collapse
Could you tell me more specifically is that by JB leak ... I think that is the one I have, if I indicases of where I can get the files would greatly appreciate it ^^
Re: [Q] Power botton Isues
Right over here:
http://www.sammobile.com/2012/11/15/i9100xxlsj-–-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
Sent from the little guy
gastonw said:
Right over here:
(Link)
Sent from the little guy
Click to expand...
Click to collapse
Thank you very much for your help, in about 1 hour has finished downloading (Hotfile is very slow xD), hope it works
this is installed by odin, or recovery? (I think odin, but better ensure xD)
Re: [Q] Power botton Isues
odin / mobile odin
Check Q&A, there's a thread about hotfile not working, some guy posted a premium account generator. something like leecherexpress.com/hotfile or similar.
Sent from the little guy
gastonw said:
odin / mobile odin
Check Q&A, there's a thread about hotfile not working, some guy posted a premium account generator. something like leecherexpress.com/hotfile or similar.
Sent from the little guy
Click to expand...
Click to collapse
Hi, I have to tell you two stories.
The good is that doing what you've told me, everything works fine (at least for now)
The bad news is that if you then install the official version and not the leak, I lose everything .... and what bothers me most of the leak is a bug that has to do that sometimes when you unlock the phone, takes time to answer the screen .... xD
But still, many thanks!
Ziddent said:
Hi, I have to tell you two stories.
The good is that doing what you've told me, everything works fine (at least for now)
The bad news is that if you then install the official version and not the leak, I lose everything .... and what bothers me most of the leak is a bug that has to do that sometimes when you unlock the phone, takes time to answer the screen .... xD
But still, many thanks!
Click to expand...
Click to collapse
Yep, I'm good at bets.
I don't know why after flashing LS8 some get no lockscreens, it's weird. JB leak works all the time tho, wich weirder.
I would flash LS8 via Mobile Odin, no wipes. Just to see if it gets fixed.
This is often caused but a problem in EFS in the /efs/imei/keystr file it can be permissions or the fact that the file does not exist with ON in it
If the file does not exist use root explorer to make sure /efs/imei/keystr has the work on in it and premissions are rw-rw-r--
or terminal emulator to
su
echo -n ON > /efs/imei/keystr
chmod 644 /efs/imei/keystr
reboot
Re: [Q] Power botton Isues
Plod72 said:
This is often caused but a problem in EFS in the /efs/imei/keystr file it can be permissions or the fact that the file does not exist with ON in it
If the file does not exist use root explorer to make sure /efs/imei/keystr has the work on in it and premissions are rw-rw-r--
or terminal emulator to
su
echo -n ON > /efs/imei/keystr
chmod 644 /efs/imei/keystr
reboot
Click to expand...
Click to collapse
This is why I don't know
Sent from the little guy
gastonw said:
Yep, I'm good at bets.
I don't know why after flashing LS8 some get no lockscreens, it's weird. JB leak works all the time tho, wich weirder.
I would flash LS8 via Mobile Odin, no wipes. Just to see if it gets fixed.
Click to expand...
Click to collapse
try what You told me, but I have not worked, yet I appreciate the help ^ ^
Plod72 said:
This is often caused but a problem in EFS in the /efs/imei/keystr file it can be permissions or the fact that the file does not exist with ON in it
If the file does not exist use root explorer to make sure /efs/imei/keystr has the work on in it and premissions are rw-rw-r--
or terminal emulator to
su
echo -n ON > /efs/imei/keystr
chmod 644 /efs/imei/keystr
reboot
Click to expand...
Click to collapse
This really worked for me, but not on the first try, on the first try, I corrupted the IMEI, restore it with a copy of the efs folder, and went back to try, this time if it worked xD
Thank you very much for the help.
I have to mark the post in some way so that people know that this solved or not necessary? If yes, how should mark it?
Ziddent said:
try what You told me, but I have not worked, yet I appreciate the help ^ ^
This really worked for me, but not on the first try, on the first try, I corrupted the IMEI, restore it with a copy of the efs folder, and went back to try, this time if it worked xD
Thank you very much for the help.
I have to mark the post in some way so that people know that this solved or not necessary? If yes, how should mark it?
Click to expand...
Click to collapse
Glad you pulled it off.
You can rename the thread with a (SOLVED) instead of the [Q].
Hi Guys i have a little problem I Have a galaxy note 2 n7102 (Clone).I have rooted it 2 days ago.i have the android stock boot animation
but when i added a custom boot animation,when i rebooted the screen goes black and then the phone starts up
I tried to put it in system/media and data/local and change bootanimation and samsungani in system/bin and reboot but nothing happens
Plz anyone tell me And i will thank him
AND Here is the bootanimation
AnY Solution?
Do you have a custom recovery available for your device?
brakke97 said:
Do you have a custom recovery available for your device?
Click to expand...
Click to collapse
Look i rooted my phone but how to know that i have custom recovery or not
just flash with odin
Get rom toolbox pro from google play for 4.4$ or less
open it and swipe to the right to go to interface and then scroll down to boot animation and choose the one you want
AM NOT HELD RESPONSIBLE FOR ANY DAMAGE THAT MAY OCCUR TO YOUR DEVICE DO IT AT YOUR OWN RISK
thats all and your free to go
Hit thanks if this helped
mahmoodinho said:
Get rom toolbox pro from google play for 4.4$ or less
open it and swipe to the right to go to interface and then scroll down to boot animation and choose the one you want
AM NOT HELD RESPONSIBLE FOR ANY DAMAGE THAT MAY OCCUR TO YOUR DEVICE DO IT AT YOUR OWN RISK
thats all and your free to go
Hit thanks if this helped
Click to expand...
Click to collapse
i made it from rom toolbox lite and after i have the android stock bootanimation it became a blackscreen and then starts up
LuCaEgYpTMaN said:
i made it from rom toolbox lite and after i have the android stock bootanimation it became a blackscreen and then starts up
Click to expand...
Click to collapse
AnY SoluTioN?
mahmoodinho said:
Get rom toolbox pro from google play for 4.4$ or less
open it and swipe to the right to go to interface and then scroll down to boot animation and choose the one you want
AM NOT HELD RESPONSIBLE FOR ANY DAMAGE THAT MAY OCCUR TO YOUR DEVICE DO IT AT YOUR OWN RISK
thats all and your free to go
Hit thanks if this helped
Click to expand...
Click to collapse
still black screen
LuCaEgYpTMaN said:
still black screen
Click to expand...
Click to collapse
AnYone plz answer?
I think I have the answer!
The only thing I need to know is your device his name and manufacturer.
Plz reply so fast as possible!
brakke97 said:
I think I have the answer!
The only thing I need to know is your device his name and manufacturer.
Plz reply so fast as possible!
Click to expand...
Click to collapse
Ok thanks first for your reply
it's a n7102 phone mt6589 device and it's made in korea (written made in korea by samsung)
kernel version 3.0.13
android 4.1.2
When you plug it in to the computer, does it connect or is it unrecognized?
brakke97 said:
When you plug it in to the computer, does it connect or is it unrecognized?
Click to expand...
Click to collapse
yes it connects and recognize the sd card and the internal storage
Ah that's awesome! Btw do you want a fresh clean install with everything like it was at stock or just the blackscreen fix?
brakke97 said:
Ah that's awesome! Btw do you want a fresh clean install with everything like it was at stock or just the blackscreen fix?
Click to expand...
Click to collapse
no only the blackscreen fix!!!!!!!!!
Ah ok, can you set up ADB, because it's needed to get access to your root folder.
Afterwards, you need to download this file, it's the firmware for your device https://docs.google.com/file/d/0B4AdByfaH4T0WWJEQlNjeHg4bzg/edit
If you have setup your adb and it's running, extract the firmware on your desktop and go to the path "simcom77_twn_cu_ics2-ota-I968.I968.02.05.G.A-V1.0.1B04P85.zip\system\media" without quotes, and copy all the files (via adb) in your phone's /system/media/ and before doing that delete the previous files that are corrupted. After that your phone will be fixed!
brakke97 said:
Ah ok, can you set up ADB, because it's needed to get access to your root folder.
Afterwards, you need to download this file, it's the firmware for your device https://docs.google.com/file/d/0B4AdByfaH4T0WWJEQlNjeHg4bzg/edit
If you have setup your adb and it's running, extract the firmware on your desktop and go to the path "simcom77_twn_cu_ics2-ota-I968.I968.02.05.G.A-V1.0.1B04P85.zip\system\media" without quotes, and copy all the files (via adb) in your phone's /system/media/ and before doing that delete the previous files that are corrupted. After that your phone will be fixed!
Click to expand...
Click to collapse
OMG this made the phone more bad ,i didnt make a backup and when i deleted the system/media and replaced it with the other:
1-no boot a crash page came and then the blackscreen and then starts up
2-NO Sound when i am touching anything :crying: plz help!!!!!!!!!!!!!!
LuCaEgYpTMaN said:
OMG this made the phone more bad ,i didnt make a backup and when i deleted the system/media and replaced it with the other:
1-no boot a crash page came and then the blackscreen and then starts up
2-NO Sound when i am touching anything :crying: plz help!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Did you make a Nandroid Backup when you first Rooted the Device ? If so, Boot into Recovery. Then restore your Nandroid. If not then you can either Flash a Custom Rom, or the Stock Rom Rooted. Either should resolve your issues.
prboy1969 said:
Did you make a Nandroid Backup when you first Rooted the Device ? If so, Boot into Recovery. Then restore your Nandroid. If not then you can either Flash a Custom Rom, or the Stock Rom Rooted. Either should resolve your issues.
Click to expand...
Click to collapse
is there any stock rom or custom rom for note 2 gt-n7102
and i nedd screen shots plz!!!!!!
Yeah sure the file in my post was the firmware, if you want to check it, just look at this site: http://goo.gl/808du
I tried Euphoria ROM and came back to stock by flashing the 04-05 all.zip and the latest patch.... Note surprisingly the rotation is reversed!! I rebooted but no change... Can anyone give me a solution for this??... I'm on stock ROM and kernel.
vinay235 said:
I tried Euphoria ROM and came back to stock by flashing the 04-05 all.zip and the latest patch.... Note surprisingly the rotation is reversed!! I rebooted but no change... Can anyone give me a solution for this??... I'm on stock ROM and kernel.
Click to expand...
Click to collapse
Factory reset maybe....
Tried that too....wiped everything and installed stock ROM but problem persists.
The problem began after I tried some xposed modules but after wiping everything it shudve gone right??
vinay235 said:
Tried that too....wiped everything and installed stock ROM but problem persists.
The problem began after I tried some xposed modules but after wiping everything it shudve gone right??
Click to expand...
Click to collapse
Yes, a reset "should've" fixed everything but now its sounding like you have hardware problem.
Anyway to confirm that??
just go to build.prop with text editor or something and change the value for hwrotation. it's probably upside down. haha
Is it in /system/ folder? And I didn't find the hwrotation value itself.. Could u please guide me?
vinay235 said:
Is it in /system/ folder? And I didn't find the hwrotation value itself.. Could u please guide me?
Click to expand...
Click to collapse
yea, you'll need root explorer, go to system and open build.prop with text editor, find hwrotation and change the value (if the value is 0, change it to 180 and vice versa if the value is 180) and save, reboot.
Hakim Farouk said:
yea, you'll need root explorer, go to system and open build.prop with text editor, find hwrotation and change the value (if the value is 0, change it to 180 and vice versa if the value is 180) and save, reboot.
Click to expand...
Click to collapse
Got it Hakim but didn't find hwrotation value so added a ro.sf.hwrotation in the build prop and tried all values but no change....and my problem mainly is wen I turn 90 to the left the screen reverses..just so that my problem is clear...shud I give any other property to that?
vinay235 said:
Got it Hakim but didn't find hwrotation value so added a ro.sf.hwrotation in the build prop and tried all values but no change....and my problem mainly is wen I turn 90 to the left the screen reverses..just so that my problem is clear...shud I give any other property to that?
Click to expand...
Click to collapse
you seem to have a calibration problem with your gyro. i've never tried this method but it's worth the shot i think. https://forums.oneplus.net/threads/rotation-sensor-calibration.358538/
Hakim Farouk said:
you seem to have a calibration problem with your gyro. i've never tried this method but it's worth the shot i think. https://forums.oneplus.net/threads/rotation-sensor-calibration.358538/
Click to expand...
Click to collapse
This is what I got from dialling that number...
vinay235 said:
This is what I got from dialling that number...
Click to expand...
Click to collapse
did you follow the instruction for a factory reset, skip the google log in and go straight to calibrate?
Hakim Farouk said:
did you follow the instruction for a factory reset, skip the google log in and go straight to calibrate?
Click to expand...
Click to collapse
hey i just noticed that the screen flips only after like 65 degrees of rotation so i think it has to be calibrated properly which im not able to do...any other way to calibrate my sensors...apps in play store say its been calibrated but sadly no change...
Same
Did the problem solve for you? I also flashed 04all zip.. And auto rotation is reversed
sarthakspiker said:
Did the problem solve for you? I also flashed 04all zip.. And auto rotation is reversed
Click to expand...
Click to collapse
Yes! Just wipe everything including system except internal storage and flash the stock ROM ... That worked for me!
vinay235 said:
Yes! Just wipe everything including system except internal storage and flash the stock ROM ... That worked for me!
Click to expand...
Click to collapse
Lol.. It was due to old firmware.. This issue was there in 2.1.2.. So solved after update
Sent from my ONE E1003 using Tapatalk
I have this problem after installing CM13. Tried wiping all of it and doing a fresh install and performing the "*#808# with no luck, just brings up a window that says "running USSD code" then it closes. Not sure what could possibly be the issue at this point. Any help?
I think u should wipe everything, install latest stock, then try clean install of cm13
Install at least 2.1.3 stock then it would be fine ..
Sent from my ONE E1003 using Tapatalk
I think I have the same problem. For me, portrait mode is fine but when I tilt the device into landscape mode (90° counterclockwise) then the screen is rotated clockwise instead. Analogously, when I put it in reverse landscape mode (90° clockwise), the screen is rotated counterclockwise. So the screen contents are always upside down in landscape mode. Did you guys have the same problem?
I tried everything suggested here. I first noticed the problem in OxygenOS 2.2.0-X. Tried installing an older OxygenOS version (2.1.3), the problem persisted. Then I flashed TWRP, rooted the device and installed a custom ROM, the problem persisted. I also tried a factory reset and wiping everything (including system), the problem persisted.
Does anyone have any other suggestions on what I could try? Or do you think this is a hardware issue? The device fell down once, do you think this could have broken the sensor?
I appreciate any kind of help.