Related
RoXSel Kernel for GT-I8160 aka Codina aka Ace 2
Team: Roxsel (Rox and jereksel)
I'M IN NO WAY RESPONSIBLE OF ANY DAMAGE CAUSED BY USING THIS CUSTOM KERNEL.
PLEASE NOTE THAT SOME FEATURES CAN DAMAGE YOUR PHONE AND YOUR EAR.
What is needed:
Samsung GT-I8160 (Jellybean)
Custom, non stock based ROM (CM, P.A.C, Slim, RootBox, LiquidSmooth...)
Some Android experience
Features:
zram: zRAM supports for android
swap: swap supports
fs: CIFS module
fs: Fsync control [Cocafe]
fs: exfat-nofuse [Dorimanx]
fs/aio: Asynchronous io performance improved
arm: ThumbEE
arm/vfp: Build with neon
arm/crypto: ARM AES and SHA-1 crypto implementation
abb-Regulator: VOTG power supply
abb-Chargalg: Real charged notification
abb-Charger: Charger control
lib: Optimzed CRC32 algorithm [ezekeel]
lib: GNU C version memcpy & string
mmc: spi CRC configurable [Cocafe]
mali: Utilization control
mali: MALI TWEAK[Cocafe]
mali: PM sampling rate tweakable [Cocafe]
kernel: LZO compression
snvet: Reduce the waketime 6s -> 1s
sched: Disable sched debug stuff
debug: Remove Samsung debug code [Adi_Pat]
debug: Android logger as module (free 4mb RAM)
st-mmio: Highlight mode for rear LED flash [Cocafe]
bcmdhd: PM_FAST by default
bcmdhd: Reenable ipv6 and disable multicast in suspend [Andrew Dodd]
random: Entropy tweaks [dorimanx]
random: Frandom module support
staging: Add Snappy and lz4 compression
staging: Lowmemorykiller tweaked
cpufreq: 14 available CPU governors
[*]block: 8 IO schedulers
ramdisk: Init.d scripts
ramdisk: LZO compression
ramdisk: ClockworkMod Recovery 6.0.3.4 [CyanogenMod]
ramdisk: ClockworkMod Touch Recovery 6.0.3.2 [SlimBean]
toolchain: Linaro GCC 4.7
More details in changelog and Github repo
Installation:
Download RoXSel_Kernel_vX.zip
Boot into recovery
Wipe Cache ( Highly Recommended )
Flash RoXSel_Kernel_vX
Reboot
Enjoy !
Downloads:
RoXSel Kernel v2
RoXSel Kernel v2 - CWM Touch
RoXSel Kernel v2 (4.1.2 Roms)
RoXSel Kernel v2 (4.1.2 Roms) - CWM Touch
Sources:
Credits:
dh.harald for kernel source
hafidzduddin, cocafe and Adi_Pat for tweaking source
If i forgot someone contact me
How to play with kernel
Here are some intructions/tips about how to play with the kernel.
Terminal is needed.
If you want to change the values,it needs su permission.
If you get 'Permisson denied',you need su permisson.
If the devices lost responses,hold power button 8s to reboot.
Simply,You can cd to the folder first,then do echos.
Then `???` stands for the number to input
Boot time
RoXSel boots faster than stock normally.
4.2.2
Code:
Stock: 8600ms - 8800ms
RoXSel: 8400ms - 8600ms
Report other versions !!
How to check boottime?
Code:
cat /d/boottime/summary
CPU Governors
OndemandQ ( Default )
Ondemand
Performance
Hotplug
SmartAss2
Lionhearth
Lulzativeq
Powersave
Intellidemand
Lagfree
Lazy
Interactive
Conservetive
Userspace
* Personaly,I use OnDemand(Q)
* OndemandQ is a new governor. It will hotplug cpu when screen turns off only.
* If you mind the battery life time,choose HotPlug. It hotplugs cpu frequently.
* LulzactiveQ, it will hotplug cpus
CPU Freqs
On JB,we cannot tweak min/max scale freqs via apps like SetCPU.
Here is the method.
Code:
cd /sys/power
For example: set 400Mhz as max limited
Code:
echo 400000 > cpufreq_max_limit
* When you switch on/off power saving mode, this tweak will be overrided.
IO schedulers
Noop ( Default )
Deadline
Cfq
Bfq
Row
Zen
Sio
Vr
* Personally, i use Zen
Frandom Module
Use CrossBeeder to enable frandom.
Deepest sleep state
Stock: 3 Default: 3
Deepest supported is 5.
To change:
Code:
echo 5 > /d/cpuidle/deepest_state
* PegasusQ ( hotplug governors ) works badly with 5
* OnDemand works well with 5
* Please note that it wont increase the using time but standby time.
To check the cpuidle state:
Code:
cat /d/cpuidle/stats
USB VBus
( v2+ )
This can enable the internal vbus power supply for usb devices.
But the phone still cannot recognize our usb devices now.
You can use it for fun,like charging for other devices, using usb fan...
To enable :
Code:
cd /sys/kernel/abb-regu
echo 1 > VOTG
* Say 0 to VOTG to disable
* Plug yoru cable first,then enable it
zRAM
zRAM is optimized for Android.
It is not lazy anymore.
Using zRAM will take a little CPU,because it needs to compress/decompress memory.
Recommended compressing about 18% of RAM,about 100mb
Setup disksize first: (example: 96mb= 96×1024×1024)
Code:
echo 100663296 > /sys/block/zram0/disksize
* Larger size more RAM will be compressed.
* Too large size might make phone lag
Enable:
Code:
mkswap /dev/block/zram0
swapon /dev/block/zram0
To check how many does it use:
Code:
cat /sys/block/zram0/num_reads
cat /sys/block/zram0/num_writes
* You can get other info in its sysfs
Swap
Format/resize your SdCard via computer first.
Enable:
Code:
mkswap /dev/block/mmcblk1p1
swapon /dev/block/mmcblk1p1
Init.d script
Put some scripts (any name you like) in init.d folder with permisson 0777 (rwxrwxrwx) (at least has read and exec permission)
Scripts with right permisson will be runned when system boots.
Charger control
Please note that this control can damage your battery/phone.
If your battery/phone damaged,read the top of #1 post.
Lower current makes the charging longer,but protects battery.
Too high current can burn your battery!
I recommend you that dont set the max limited current over 900mA.
AC Maximum current: (stock: 600 , min: 0 , max: 900) mA
Code:
echo ??? > /sys/kernel/abb-charger/max_ac_c
USB Maximum current: (stock: 600 , min: 0 , max: 900) mA
Code:
echo ??? > /sys/kernel/abb-charger/max_usb_c
* The control only accepts values like 0, 100, 200 ...
* Set usb current to 0,the phone wont charge in usb port,but transmits data.
Track driver memory [advanced] :
Code:
cat /sys/kernel/abb-charger/stats
To get the charging current:
When you plug charger:
Code:
dmesg | grep -i ab8500-charger
Real charged notification
To be honest,it needs to check manually.
Code:
cat /sys/module/abb_chargalg/parameters/eoc_status
* You can use Rootexplorer to view this file.
* When it says "First full charging reached",then the UI should show you charged 100%
But it is not the real full charged.
* When it says it is the real full charged,you can unplug the charger.
* When you are charging and do a reboot will reset the counter.
* According to my experiments,it needs 1-2 hours to charge to real full.
MMC SIP CRC
( v2+ )
Disabling SPI CRC can improve mmc performance (10% ~ 30%)
But phone may freeze randomly
Code:
echo 0 > /sys/module/mmc_core/parameters/use_spi_crc
Camera LED Flash
( v2+ )
HIghlight mode for assistive light, enabling this for a long time will heat up your device, be careful!
Enable:
Code:
echo 1 > /sys/class/camera/flash/highlight
Disable:
Code:
echo 0 > /sys/class/camera/flash/highlight
Fsync Control
Get current status:
Code:
cat /sys/kernel/fsync/mode
FSYNC modes:
Code:
0: fsync on
1: fsync off
2: fsync dyn
Disable FSYNC:
Code:
echo 1 > /sys/kernel/fsync/mode
* Disabling fsync can improve io performace,
but it can make the data which hasnt been written lose when a sudden poweroff comes.
* Disabling fsync or enabling dyn_fsync will make param driver fail to store data
That means your "reboot recovery" will fail.
Enable Dynamic FSYNC:
Code:
echo 2 > /sys/kernel/fsync/mode
* Dynamic fsync will sync all buffers when screen turns off,
* If there is a heavy io load,the screen might get stuck for seconds.
* This is an experimental feature.
Mali GPU
Mali debug level
Disabling can speed up a bit
Code:
echo 0 > /sys/module/mali/parameters/mali_debug_level
* Higher level,more messages will be printed in dmesg, system will slow down
Mali L2 max reads control: (Stock:28kb,Default:48kb(max))
Code:
echo xx > /sys/module/mali/parameters/mali_l2_max_reads
* Some values will slow down graphics
* If not sure,keep default
Mali PM sampling rate: (Default: 1000ms)
Code:
echo xx > /sys/module/mali/parameters/mali_pm_sampling_rate
Mali PP scheduler tweaks: (Default: disable)
Code:
echo 1 > /sys/module/mali/parameters/mali_pp_scheduler_balance_jobs
* Enabling this,Some places will over ahead,choose by your self
Mali Utilization sampling rate: (Stock:500ms,Default:1000ms)
How often report a mali utilization.
Code:
echo xxx > /sys/module/mali/parameters/mali_utilization_sampling_rate
* Keep this default if unsure.
Mali Utilization control
(Default: low_to_high 192 high_to_low 64)
Our driver will report a mali utilization frequently.
This utilization(range: 0~255) means the load of mali.
If utilization is bigger than low_to_high ,driver will request higher hardware performance(highest APE/DDR OPP).
If utilization is smaller than high_to_low ,the driver will store the requested OPP(uses low OPP).
OPP can be understood as freq simply.
To check mali utilization values:
Code:
echo 5 > /sys/module/mali/parameters/mali_debug_level
cat /proc/kmsg | grep -i utilization
When it says SIGNAL_HIGH,it will request highest OPP.
When it says SIGNAL_LOW,it will request lowest OPP.
Press Ctrl+C to stop printing.
You can reduce low_to_high to trigger higher OPP requirement.
For smoothness and less powersaving:
Set low_to_high between 100-192.
Code:
echo 120 > mali_utilization_low_to_high
Mali max preemptive allocated max memory size:
Default is 16mb(16*1024*1024), bigger max size more throughput.
But when this value is too big, no more throughput.
For example: 48mb = 48*1024*1024
Code:
echo 50331648 > /sys/module/mali/parameters/pre_allocated_memory_size_max
EGL Driver
To use Mali hardware egl driver only:
Edit /system/lib/egl.cfg
Code:
0 0 android
0 1 mali
To
Code:
0 0 mali
Then remove libGLES_android.so
* Recommend to backup these files
* According to my feelings: after disabling sw egl driver,UI is faster
Logcat
Well,we have made android logger(logcat) as module to free more RAM.
Some guys request logcat.
Now we provide you a workaround:
Create a new init.d script:
Code:
#!/system/bin/sh
insmod /system/lib/modules/logger.ko
or
Flash this ZIP
Then you can use logcat command.
Almost tweaks will be restored to default after reboots.
So you can make your tweaks as init.d scripts to apply them when boots.
Bugs and Changelogs
Bugs :
LPM charging (Not on stock)
-------------------------------------------------------------------------------------------------------------------------------
Changelog Version 3 (XX/XX/XXXX) :
| Stock version ( Touch ) | | 4.2.2 Version ( Touch ) | | CM 10 version ( Touch ) | | MIUI version ( Touch ) |
Kernel version updated 3.0.31 - > 3.0.96
vmscan: vm_swappiness = 60 -> 20
snd_usb: fix sysfs conflicts [Cocafe]
bcmdhd: wifi signal values patch
power: stop printing noise [Cocafe]
sched: Enable arch power
mm: VM Tweaks [Adi_Pat]
fs: Reduce vfs_cache_pressure to 20 [Adi_Pat]
debug: Disable Frame pointer [Adi_Pat]
defconfig: Enable CLEANCACHE
Added support for MIUI
Added support for STOCK ~ HOT
-------------------------------------------------------------------------------------------------------------------------------
Changelog Version 2 (08/09/2013) :
| 4.2.2 version ( Touch ) | | CM 10 version ( Touch ) |
ramdisk: LZO compression
kernel: LZO compression
mali: pre-allocated os memory size 24mb -> 16mb
st-mmio: Highlight mode for rear LED flash [Cocafe]
bcmdhd: Reenable ipv6 and disable multicast in suspend [Andrew Dodd]
sched: Disable arch power
arm/crypto: ARM AES and SHA-1 crypto implementation
fs: exfat-nofuse [Dorimanx]
drivers/mmc: spi CRC configurable [Cocafe]
abb-Regulator: VOTG power supply
toolchain: Linaro GCC 4.7
partialy fix LPM charging
-------------------------------------------------------------------------------------------------------------------------------
Changelog Version 1 (29/08/2013) :
| 4.2.2 version ( Touch ) | | CM 10 version Touch |
Initial Release
Added CWM Touch version (04/09/2013)
Added CM 10 CWM Touch version (04/09/2013)
-------------------------------------------------------------------------------------------------------------------------------
Note:
I/O schedulers cant be changed in stock performance app that comes with most ROMS.
Use 3rd party app instead ( SetCPU, No-Frills... )
What are these an do I need it I'm running rootbox
Sent from my GT-I8160 using xda app-developers app
Faster with CM10 than CM10 with his stock kernel?
EDIT:
OP: @Rox = Roberthinio??
Ok IDK nothing about kernel. I use CM10 from @dh.harald. If i use this kernel, the performance will increase? And i use mod vold.fstab from MIUI beta rom, will it causing complication when i flash this kernel? Or i should flash this kernel with fresh CM10?
Thanks in advance, congratulations for the elaboration
good job :fingers-crossed:
Thank you guys. I'll give a try on slim bean.
On stock JB phone does not boot, its blocked at samsung blinking logo. Advices?
I can go to cwm recovery.
Sent from my Nivo using Tapatalk 4
myhayserano said:
On stock JB phone does not boot, its blocked at samsung blinking logo. Advices?
Sent from my Nivo using Tapatalk 4
Click to expand...
Click to collapse
What is needed:
Samsung GT-I8160 (Jellybean)
AOSP ROM (CM, P.A.C, Slim, RootBox, LiquidSmooth...)
Some Android experience
This is confusing, does it run on stock JB roms? Or is intended olnly fir custom roms?
Sent from my Nivo using Tapatalk 4
myhayserano said:
On stock JB phone does not boot, its blocked at samsung blinking logo. Advices?
I can go to cwm recovery.
Sent from my Nivo using Tapatalk 4
Click to expand...
Click to collapse
Read the requirements, lucky you don't hardbrick your SGA2 :')
myhayserano said:
On stock JB phone does not boot, its blocked at samsung blinking logo. Advices?
I can go to cwm recovery.
Sent from my Nivo using Tapatalk 4
Click to expand...
Click to collapse
read what is needed before you flash. to boot phone flash kernel.bin.md5 from one of firmwares using odin
Not needed I had cwm backup of my rom and just restored stock kernel phone booted ok. Please modify first post and specify that this kernel is compatibile ONLY with custom roms.
This phrase at the begining can make people mistake:
``Samsung GT-I8160 (Jellybean)``
Sent from my GT-I8160 using Tapatalk 4
Any bugs?
Sent from my GT-I8160 using xda premium
myhayserano said:
Not needed I had cwm backup of my rom and just restored stock kernel phone booted ok. Please modify first post and specify that this kernel is compatibile ONLY with custom roms.
This phrase at the begining can make people mistake:
``Samsung GT-I8160 (Jellybean)``
Sent from my GT-I8160 using Tapatalk 4
Click to expand...
Click to collapse
Read all phases and everything will be cleared out...
@up no bugs except that you have to use 3rd party app to change i/o scheduler ( you cant change inside settings-performance, dont kniw why. Some app bug)
I will ad more info later on 2 nd post i am not at home
Sent from my GT-I8160
Don't mean to sound like a noob but is it safe to use on top of tweaks such as Project Injection?
Yes. Also if you use crosbreeder you can enable frandom
Sent from my GT-I8160
Rox said:
Yes. Also if you use crosbreeder you can enable frandom
Sent from my GT-I8160
Click to expand...
Click to collapse
Thanks for the quick reply. I'll be pairing up this kernel with LiquidSmooth as soon as call volume is fixed. :good:
I'm trying now. This is ****** handsome! You put hotplug governor, my battery say tahnks to you
Maybe one little bug: on powersave frequency doesnt remain at 200mhz. And if i set frequency min 200 MHz - max 400mhz the 800mhz step continue to work, eventi if i choose userspace.
I'll try with no CPU frills.
Good work mate!
Custom kernel for Samsung Galaxy Ace 2
Features:
Only one universal kernel for JB, KK and LP-based ROMs
CPU, GPU and DDR OC support
more governors and I/O schedulers
Lite kernel - some kernel features moved to modules
fully working BLN
Sweep2wake && Doubletap2wake
CPU freq settings for suspend
Full F2FS support
SELinux support
UKSM support
ABB-charger tweaks
Credits:
@dh.harald and @hafidzduddin for contribution on codina sources
@ Team Canjica for a base for this kernel
@ Nova Fusion for F2FS implementation
@zwliew for contribution on TC kernel
@cocafe for LiveOPP, GPU OC, abbamp and abb-charger tweaks and many cool patches which I've used from his kernel
@faux123 for dynamic Fsync implementation
@Christopher83 for dynamic management of dirty page writebacks implementation
@KINGbabasula for contribution on TC kernel sources
@boype for SIOPlus tweaks and OndemandPlus governor
@Adi_Pat for abbamp, kernel tweaks
@PolishVodka for initramfs scripts for 4.2.x and 5.0.x
@Rox for help in fixing initramfs scripts for 4.1.2
@ace2nutzer for optimization CPU OC and for whatever scripts which I have used in my kernel
@Meticulus for BLN, Sweep2wake and Doubletap2wake
@mkaluza for huge LiveOPP/Mali improvements and Dynamic governor
@yanpol199 for help with F2FS support in TWRP
@ all users who tests this kernel and directs the development along the right path
@ all those users, who I forgot to mention (PM me if so)
Team Win for TWRP recovery
CyanogenMod Team for CWM recovery
Phil3759 for philz recovery
Samsung for opening kernel source
Linus Torvalds for Linux sources
Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this kernel!!!
To install kernel with F2FS support read installation method in 3rd post
To install kernel with dual boot support, proceed this method.
Since R2.12.1 has been released, no need to care about bootscripts, kernel package will install it itself.
Source Code:
r6.0
< r6.0
Download:
FTP
Thanks @S.AMU for providing FTP-Server
Thanks @shaqman89 for providing build server
XDA:DevDB Information
Chrono Kernel, Kernel for the Samsung Galaxy Ace II
Contributors
ChronoMonochrome, cocafe, faux123, zwliew, mkaluza, Meticulus, KINGbabasula, ace2nutzer, TeamCanjica
Source Code: https://github.com/ChronoMonochrome/Chrono_Kernel-1/commits/master-3.10
Kernel Special Features: Swappable ramdisk, UKSM, dual boot support
Version Information
Status: Stable
Current Stable Version: R5.1
Stable Release Date: 1974-11-11
Beta Release Date: 1974-11-11
Created 2014-06-24
Last Updated 2017-10-27
Changelogs and features
Bug list:
-
Changelog
(old changelog)
R2.10
Build from R2.6 sources with re-added all changes in LiveOPP, cpufreq_limits module, some interfaces from 2.9.x (usb sw reset, PonKey emulator on voldown/up).
R2.9
Mali OC module v2.0:
added interfaces boost_hispeed1, boost_hispeed2.
added interfaces mali_threshold_freq_down and mali_threshold_freq_up
(new interfaces manual)
1) mali_threshold_freq_down/up:
echo new value to tweak it:
Code:
echo 150 > /sys/kernel/mali/mali_threshold_freq_up
2) mali_boost_hispeed(2)
Use command
Code:
echo idx=X > /sys/kernel/mali/mali_boost_hispeed2
to tweak its freq.
following command is to tweak its threshold:
Code:
echo threshold=220 > /sys/kernel/mali/mali_boost_hispeed2
partially re-enabled touchboost (it actually was enabled even on 2.7.4, but I forgot to mention)
reverted suspend/hibernate/freezer etc. commits to hopefully fix reboots issue in deepsleep
fixed APE_25_OPP (in suspend it actually used APE50 previously)
minor fixes in cpufreq_limits driver
R2.8
Mali OC module v2.0(detailed description in 3rd post):
added interfaces boost_hispeed1, boost_hispeed2.
added interfaces mali_threshold_freq_down and mali_threshold_freq_up
partially re-enabled touchboost (it actually was enabled even on 2.7.4, but I forgot to mention)
reverted suspend/hibernate/freezer etc. commits to hopefully fix reboots issue in deepsleep
fixed APE_25_OPP (in suspend it actually used APE50 previously)
minor fixes in cpufreq_limits driver
(2.7.6)
- fixed broken GPU scaling algorithm (removed /sys/kernel/mali/mali_scaling_dynamic)
(2.7.5)
- partially reverted LiveOPP voltage autocalibration
- fixed unstable mali tunables and added interface mali_scaling_dynamic
Code:
echo 1 > /sys/kernel/mali/mali_scaling_dynamic
When mali_scaling_dynamic is used, mali will scale between mali_boost_low and mali_boost_high using all steps between these mentioned. mali_stats provides statistics about mali utilization on each step.
- removed some GPU freq steps
(2.7.4)
- new governor Dynamic (thanks to mkaluza)
- new GPU scaling algorithm (thanks to 1N4148 ) - ondemand-like GPU governor
- LiveOPP: reworked avs-based varm recalibration algorithm
(2.7.3)
added governor OndemandPlus (thanks to boype)
removed governors with hotplugging support
added interface to tweak PLLDDR freq on suspend:
Code:
echo on > /sys/kernel/cpufreq/pllddr_raw
To control freq are used raw PLLDDR register values:
Code:
echo suspend=0x000050158 > /sys/kernel/cpufreq/pllddr_raw # 675 MHz
Code:
echo resume=0x000050168 > /sys/kernel/cpufreq/pllddr_raw # 798 MHz
PLLDDR freq can be checked via
Code:
cat /sys/kernel/liveopp/pllddr
Settings applies after 3 sec after suspend/resume.
Too low suspend or too high resume value may cause reboot. Please note that this setting still experimental and unstable itself, so it's disabled by default.
adjusted some GPU OC defaults
fixed BT issues
(2.7.2)
- fixed pllddr_cross_clocks instability
- removed unneeded DDR_50_OPP requirement on screen on (should prolong battery lifetime).
2.7
many various commits from Linux 3.3 (thanks @faux123)
improved hotplugging mechanism
updated RCU system
kernel scheduler
memory management
etc...
LiveOPP:
recalibrate varm and vbbx on boot (better stability)
added interface to OC some clocks that depends on PLLDDR
reimplemented sweep2wake and doubletap2wake (thanks @Meticulus)
enabled UKSM (thanks @cocafe)
- better RAM performance with tiny cost CPU. Boot time will be increased by 3 sec, it's ok.
uploaded kernel for s6d.
R2.6
ABB-charger:
reverted most of changes. It's only uses custom voltage table, termination current 150 mA and some other tweaks, provided by ace2nutzer.
added tweakable interfaces for termination current(better battery lifetime).
LiveOPP:
added most ape_25_opp switch interface
added steps 85, 350, 450 MHz.
ddrpll interface renamed to pllddr ;D
added input boost support for most of governors (thanks to zwliew for original patch)
R2.5
- only one kernel version for all ROMs/Filesystems/codina(p), please note that installation method is different from usual installation
- Switch to single platform RTC driver - AB500 (finally fixed all problems with clock freeze issue) [golden-guy]
- update LiveOPP from CoCore
- reworked and added DDRPLL boost [WIP]
R2.4
completely rewritten screenoff limits driver
added steps 30, 125, 150, 175 MHz, increased voltage on various steps for stability
enabled SELinux again
various fixes in FAT filesystem
re-added exFat support
re-added ZenX
abb charger fix v2 [ace2nutzer]
zRam script moved to init.d (to be able to change zRam size) on CM11
new package installation script, with little changes by me (thanks to borkins for help with this)
R2.3.2
improved battery live (full credit to ace2nutzer)
reduced liveopp table (too hard to search stable/optimal voltage)
Reverted all commits from tuna kernel (these changes are tested not well, may cause instability)
temporarily disabled SELinux
R2.2
LiveOPP 2.2:
no longer use setting ARM OPP (this previously caused lags)
simple algorithm for setting clock and voltages
use only pll, external clock no longer used
use only 1 varm selection
Big LiveOPP table (51 step: 46, 69,..., 1244 MHz)
Added and optimized new governor ZenX
Added FIFO I/O scheduler
Moved more kernel stuff to modules
TWRP 2.8.0.0
R2.1.5
Huge update from Tuna Hybrid kernel by @faux123 ( a lot thanks to him! ) :
a lot various commits from Linux Kernel 3.3-rc3
various fixes backported from Linux 3.5
fixed 3G/WiFi data arrows again
reduced kernel: 628 Mb RAM is available
Reverted from R2.1:
update of device-specific drivers from Novathor 3.4 kernel
"ARM: 7493/1: use generic unaligned.h"
(R2.0.2)
update from TC kernel
moved all networking modules to kernel (fixed lost data usage, tethering, etc.)
added module autoload (read below)
renamed interface /sys/kernel/cpufreq/screenoff_cpufreq_limits -> /sys/kernel/cpufreq/cpufreq_limits_on_suspend
R2.0-refresh
Cleaned kernel source tree from some doubtful commits
moved some kernel features to modules(thanks to mkaluza for idea and most of changes)
9p, CIFS, NTFS file systems
some unneeded ipv6 features
HID drivers
most of governors
slightly decreased boot time(in my case, from 8500 to 8330 ms)
slightly increased available RAM - 628 MB (thanks to reduced kernel size)
Huge LiveOPP improvement by mkaluza:
improved overclock stability, added all extended steps
UV 100-400 MHz steps to 0x12-0x14 (lower power consumption)
added state APE_25_OPP, used only with screen off(originally introduced by mkaluza, adapted for codina by me)
allowed change APE_OPP and DDR_OPP from LiveOPP
changed step 1228 MHz -> 1248 MHz (may cause reboots, need to find out optimal voltage)
Mali improvements by mkaluza
temporarily removed 25 MHz step (don't know how to add it with new LiveOPP, all attempts is caused boot loop)
(R1.6.3)
revert "update sweep2wake and doubletap2wake by Meticulus"
add cpufreq steps: 25, 500, 700 MHz; remove: 1050, 1100, 1250 MHz (only 12 CPU freq step is allowed)
R1.6
ARM: 7493/1: use generic unaligned.h (This has the
benefit of better code generated especially for ARMv7 on gcc 4.7+
compilers.)
register rear cam flash as LED (for BLN) - thanks to @Meticulus
update sweep2wake and doubletap2wake by Meticulus
add LMK timeout interface - @cocafe
Fix max freq not capped on suspend bug on Lulzactive (it was conflicted with screenoff cpufreq limits driver)
(R1.5.2)
F2FS support in TWRP (thanks to [email protected] for help with this)
R1.5.1
update from TC kernel
enabled SELinux (was disabled in r1.5 for testing)
ARM: 7006/1: Migrate to asm-generic wrapper support
added jRCU (thanks to cocafe)
Bugfixes
reverted to LK 3.2.0
fixed disappeared data usage monitor and probably data arrows also
fixed wifi/usb tethering - hopefully, need tests
fixed incorrect display of RAM occupied by some applications
fixed incorrect phone recognition on codina P in CWM/TWRP - thanks to @ace2nutzer
R1.5
Completely reworked file systems update:
fixed reboots, apps FC
fixed CWM loop
fixed huge battery drain (hopefully)
F2FS backported to Linux 3.2
R1.4
Bumped to Linux 3.2.9
File systems: big update from LK 3.2
Writeback: update from LK 3.2
Reduced wlan_rx_wake wakelock by half - zwliew
F2FS support in /system
Fixed more potential and real memory leaks in kernel
Removed u8500 hotplug driver again
R1.3
added BLN separate configuration of blink on and off delays
added MCDE tweaks (read below)
tweaked PegasusQ governor (based on script by ace2nutzer)
fixes:
reverted commits which caused most of random reboots reasons
finally fixed kernel panic in CFQ I/O scheduler (I hope so)
interactive governor reverted to stock TC
R1.2
workaround for s6d display bug (separate kernel version - soon)
CPU freq settings for screen off
Updates from linux kernel 3.2 (currently updated to 3.2):
File systems
Specific drivers
Security
Various core changes
Reverted:
Proportional Rate Reduction for TCP
Power management update from 3.2
1000 MHz messy workaround, provide another workaround instead
r1.1
Fixed 100 MHz bug
Added 300 MHz CPU step
Added VR I/O scheduler again (thanks to @cocafe for fixes compile errors)
Updates from Linux Kernel 3.2:
Process bandwith controller
Thin provisioning and recursive snapshots in the Device Mapper
I/O-less dirty throttling, reduce filesystem writeback from page reclaim
Proportional Rate Reduction for TCP
Memory management (Cross Memory Attach, "vmscan: add block plug for page reclaim", "thp: mremap support and TLB optimization", etc.)
Networking
Device Mapper
Virtualization
Crypto
Tracing/Profiling
r1
backport new zRam driver from 3.5 LK by @faux123. Also enables LZ4 compressor for zRam.
add u8500 hotplug driver by @zwliew again
revert voltage of display and other regulators to stock
add vpnclient.ko
a somewhat fixes and optimizations from CoCore - thanks to @cocafe
fix lagfree, lulzactiveq and interactive wrong tunables
adjust voltage(0x37) for 1200 and 1250 MHz
17.08.2014
Undervolt display from 1800 to 1400 mV
Undervolt various regulators
Revert CFQ to 3.0 branch to fix reboot issue
Add Lionheart governor, disable InteractiveQ and Hotplug
Support for 4.2.x ROMs (thanks to @PolishVodka for initramfs)
12.08.2014
fixed CFQ reboot issue (i hope so )
reboot into recovery from extended power menu should work (JB 4.1.2)- thanks to Rox
TWRP recovery instead CWM for ext4 kernel versions
Update to 3.1.10
9.08.2014
Fixed reboot issue (I hope so)
Add BFQ scheduler again
Fixed UMS bugs - thanks to cocafe
Upgrade kernel to 3.1.1
4.08.2014
Fixed bug of random change min CPU freq to 1Ghz.
Removed u8500 hotplug driver
Update sioplus from [email protected]
Temporarily removed BFQ and VR I/O scheds because they are became broken for some reasons.
Update LMK from [email protected]
Updates from 3.1 LK:
Sound cards, input devices, watchdogs, networking, staging, multifunctional devices, ... etc. See full list of changes on github.
29.07.2014
Added CPU 100MHz freq step
U8500 hotplug driver - zwliew
Universal exfat driver - zwliew
Switch to SLUB again
Updates from LK 3.1:
SLUB
Memory management (6/7 commits)
VFS (9/10 commits)
Dynamic writepage throttling
21.07.2014
revert CPU voltages to default for 0-3 steps
some changes in memory management
17.07.2014
Switch to SLQB memory allocator
Update BFQ I/O sched from v7r3 to v7r5
Enable UHID support (testing)
Some fixes in memory management
Remove some buggy "fixes" from last build
5.07.2014
fixed headset bug that appeared in last build
fixed the file permissions for CoCore Manager (for JB)
4.07.2014
F2FS support (still only KK version)
Usb drivers from STEXperia sola kernel instead stock samsung
(probably, UMS bug has been fixed. For me it works perfectly now.)
LZ4-compressed kernel support
minor fixes
27.06.2014
sources updated
enabled init.d support in kernel (JB)
added Lagfree governor
added ROW I/O scheduler
23.06.2014
fixed cpu oc via 3rd party apps
lowmemorykiller should be less aggressive
19.06.2014
cwm 6.0.48 instead stock recovery
14.06.2014
initial build
Kernel Tweaks:
(GPU/CPU undervolting and related tweaks)
Undervolting the CPU/GPU will bring battery savings but possible instability.
1) to undervolt CPU use ChronoKernel app or via init.d scripts:
Code:
echo *cpufreq* varm=xx > /sys/kernel/liveopp/arm_summary
for example, following sets voltage varm=0x10 for 200 MHz:
Code:
echo 200000 varm=0x10 > /sys/kernel/liveopp/arm_summary
or
Code:
echo 200000 varm-=10 > /sys/kernel/liveopp/arm_summary
(default varm voltage for 200 MHz is 0x1a but, code above sets 0x1a - 0xa(10) = 0x10 )
2) to undervolt GPU use init.d script:
Code:
echo x vape=yy > /sys/kernel/mali/mali_dvfs_config
Example:
Code:
echo 2 vape=0x1c > /sys/kernel/mali/mali_dvfs_config
"2" stands for DVFS idx (look at mali_boost_high/mali_boost_low).
To prevent overriding of such settings by ChronoKernel app, add line to your init.d script after GPU undervolting
Code:
chmod 444 /sys/kernel/mali/mali_dvfs_config
Don't change voltage of both GPU/CPU at the same time - otherwise if you'll get reboot if won't know what it caused. The same is for different frequencies - if you'll change voltage of too many steps you won't know which frequency caused reboot. It's not easy process, though, following method simplifies it: https://github.com/mkaluza/i9070_kernel_CoCore-E/wiki/Undervolting-janice .
3) Custom LiveOPP table.
By default some LiveOPP steps such as 100, 200, 500 ... MHz aren't used. You can re-enable those by following way:
Code:
echo 200000 enable=1 > /sys/kernel/liveopp/arm_summary
Or use CK app instead. Don't enable it unless it uses the same voltage as 400 MHz. The same is for the rest frequencies - until some of them uses same voltage, no point to enable steps with lower freq. I've added 100 MHz just to further make some tests with it once again. It can't use lower varm than 200 MHz - that's why it's disabled by default. Furthermore, not all phones well keep undervoltage, that's why 100-400 MHz steps uses same stock voltage varm=0x1a.
UPD. thanks to @borkins for this nice editor LiveOPP ARM steps: http://forum.xda-developers.com/showpost.php?p=60311291&postcount=2921
(CPU freq management tweaks)
CPU freq. limiter for screen OFF, adjust it via:
Code:
SYSFS=/sys/kernel/cpufreq/cpufreq_limits_on_suspend
echo min=100000 > $SYSFS
echo max=400000 > $SYSFS
echo on > $SYSFS
Too low frequency may cause freezes after wakeup and sound scrathes. If you use Dynamic govermor, it make no sense to use cpufreq limiter, because Dynamic already takes care about CPUfreq usage optimization. For more, read wiki.
Input boost
This feature has been originally written by zwliew.
Not all governors support input boost. Supported governors: ondemand, interactive, conservative, ZenX, lionheart and some others. Dynamic governor has its own boost interface.
Default boost frequency is 400 MHz.
Code:
echo 450000 > /sys/kernel/cpufreq/input_boost_freq # echo '0' to disable
echo 35 /sys/kernel/cpufreq/input_boost_ms
(BackLight Notification)
To configure time intervals of BLN blinking type(bln_ondelay stands for time of blink and bln_offdelay - delay between two blinks):
Code:
echo bln_ondelay=500 > /sys/kernel/bln/blink_mode
echo bln_offdelay=6000 > /sys/kernel/bln/blink_mode
Make sure BLN enabled:
Code:
echo 1 > /sys/class/misc/backlightnotification/enabled
# to enable bln_wakelock.
echo on > /sys/kernel/bln/bln_wakelock
Use /sys/devices/virtual/misc/backlightnotification/blink_mode to changes modes.
Blink modes:
0 = no blinking
1 = blink backlight only
2 = blink backlight + rear cam flash
3 = blink rear cam flash only
(Module autoload)
Now there is a simple way to load modules at boot. Just move needed modules to /system/lib/modules/autoload and reboot device(or execute /etc/init.d/00autoload)
(DDR overclock)
This feature has been developed by me and allows you to improve DDR and GPU performance. Please note, that DDR OC might work unstable and cause filesystem corruption. Though, DDR clock of 975 MHz has been highly tested and should work fairly stable on most devices.
Overclocking DDR over 975 MHz is highly NOT recommended, especially in case if you not sure that you can deal with possible consequences.
How to OC DDR:
1) by using
this script .
2) by using Terminal Emulator(in example below 975 MHz):
Code:
echo 0x5017f > /sys/kernel/liveopp/pllddr_oc_on_suspend
This setting will be applied right after disabling screen.
(Minimum APE/DDR OPP on screen on)
This feature has been developed by me and allows to set minimum APE/DDR OPP states which are used when screen is ON. APE controls many systems such as an image, video, audio system etc. DDR OPP determines performance of DDR. Default values are APE50 and DDR50. Lower states(APE25/DDR25) reduces power consumption, but may cause graphical glitches like screen blinking or filling it by vertical grey lines. If you don't have mentioned effects, it's recommended to use APE25/DDR25:
Code:
echo ddropp=25 > /sys/devices/pri_lcd_ws2401.0/mcde_screenon_opp
echo apeopp=25 > /sys/devices/pri_lcd_ws2401.0/mcde_screenon_opp
* if you don't have folder /sys/devices/pri_lcd_ws2401.0, use /sys/devices/pri_lcd_s6d27a1 instead.
(Screen refresh rate)
This feature has been developed by cocafe and modified by me. Lower lcdclk frequency cause less power usage, but too low values makes system unusable.
Following command allows to change screen refresh rate:
Code:
echo x > /sys/kernel/mcde/lcdclk
use
Code:
cat /sys/kernel/mcde/lcdclk
to see supported lcdclk modes. Default mode is 60 Hz which is recommended in most typical cases. If you've screen tearings, blinking etc. change resresh rate mode to "60+ Hz":
Code:
echo 0 > /sys/kernel/mcde/lcdclk
(ABB charger tweaks)
added tweakable interfaces for termination current. To adjust it type(just an example):
Code:
echo 90 > /sys/kernel/abb-chargalg/termination_curr_1st
echo 70 > /sys/kernel/abb-chargalg/termination_curr_2nd
curr_2nd should be less or same as curr_1st. Lower values prolongs battery lifetime, but also slows battery charging.
Default values are curr_1st == curr_2nd == 150 mA. Please note, too low values maybe aren't usable.
(Dynamic FSync)
This feature has been developed by Faux123 and allows to dynamically manage the synchronous writes performed on file system (FSync).
It uses asynchronous writes when the screen is on, instead of synchronous writes, to have better performance and a slightly lower battery drain, while when the screen is off the synchronous writes are re-enabled to flush all the outstanding writes and prevent possible data loss.
How to enable/disable the Dynamic FSync (default enabled):
1) By downloading and using Trickster MOD
2) By directly editing the file /sys/kernel/dyn_fsync/Dyn_fsync_active and setting 1 to enable the dynamic fsync, 0 to disable it (note that set value will be lost after a reboot/shutdown)
3) By using Terminal Emulator (note that set value will be lost after a reboot/shutdown)
- Open Terminal Emulator
- Run this command to disable the dynamic fsync feature
Code:
su
echo 0 > /sys/kernel/dyn_fsync/Dyn_fsync_active
- Or run this command to re-enable the dynamic fsync feature
Code:
su
echo 1 > /sys/kernel/dyn_fsync/Dyn_fsync_active
Click to expand...
Click to collapse
(Software CRCs)
Disabling software CRCs gives you a slight bump(10-30% is what they say) of MMC performance, at the cost of a possibility of your Ace 2 freezing randomly.
Code:
echo 0 > /sys/module/mmc_core/parameters/use_spi_crc
Click to expand...
Click to collapse
(Dynamic dirty page writebacks)
This feature has been developed by Christopher83 and allows to dynamically manage the dirty page writebacks with two different intervals, one when the screen is on and another when the screen is off.
It is based on a commit of Francisco Franco, but instead of using hard coded values and of disabling at all the dirty page writebacks while the screen is on (possibility of data loss).
By using a higher interval we have better performance and less battery consumption, with a very low risk of data loss.
How to customize the dynamic dirty page writebacks feature (default disabled):
Three new procfs parameters are exposed inside /proc/sys/vm path:
- dynamic_dirty_writeback is the activation status of this feature, set 1 to enable it, set 0 to disable it and use the standard behaviour
- dirty_writeback_active_centisecs is the interval for the dirty page writebacks when the system is active (screen on), the default value is 1500 centisecs (15 seconds)
- dirty_writeback_suspend_centisecs is the interval for the dirty page writebacks when the system is suspended (screen off), the default value is 500 centisecs (5 seconds)
1) By directly editing one of the file written above inside /proc/sys/vm and setting the preferred value (note that set value will be lost after a reboot/shutdown)
2) By using Terminal Emulator (note that set value will be lost after a reboot/shutdown)
- Open Terminal Emulator
- Run this command to disable the dynamic dirty page writebacks feature
Code:
echo 0 > /proc/sys/vm/dynamic_dirty_writeback
- Or run this command to re-enable the dynamic dirty page writebacks feature
Code:
echo 1 > /proc/sys/vm/dynamic_dirty_writeback
- Run this command to set customize the two intervals (30 seconds while the screen is on, 10 seconds when the screen is off)
Code:
echo "3000" > /proc/sys/vm/dirty_writeback_active_centisecs
echo "1000" > /proc/sys/vm/dirty_writeback_suspend_centisecs
(Storages switch)
By default, this kernel comes with internal and external storages switched. You can revert this behavior, by changing the line
Code:
use_swap=1
to
Code:
use_swap=0
in file /ramdisk/fstab_specs.txt and flashing the kernel package. This setting will remain until you format /ramdisk partition.
(Tweak app)
ChronoKernel settings
Thanks mars_army for this app!
Bug reports:
after experiencing a random reboot, type in terminal:
Code:
su
cat /proc/last_kmsg > /storage/sdcard0/last_kmsg.txt
report it in the thread and attach the last_kmsg.txt
Other information
How to install kernel with F2FS support:
For those who don't know what F2FS is, check these links out:
General info
Benchmarks
Warnings
1. Make sure you have a standard kernel for backup that uses ext4 just in case. If anything goes wrong, just install the backup kernel and reboot to recovery.
2. You will have to wipe your /data and /cache partitions for this. Basically factory reset.
3. For 2, you could try to backup data and restore after formatting. I haven't tried this but I could work.
Click to expand...
Click to collapse
Installation method of kernels with full F2FS support:
Before installation make sure that you have at least ~25% free space on each partition that will be formatted to F2FS.
for CWM:
make backup
format /system partition to F2FS (and also /data and /cache if you didn't do it before)
restore /system partition
for TWRP
disable md5 generation
make backup of /system
find backup folder, run terminal and rename file system.ext4.win to system.f2fs.win (it won't work via filemanager)
Code:
mv system.ext4.win system.f2fs.win
format /system as f2fs
restore backup
Then install kernel.
To install kernel on ROM that isn't supported by installer:
(supported ROMs):
Stock ROM 4.1.2
CyanogenMod 10.1*
CyanogenMod 10.2*
CyanogenMod 11*
CyanogenMod 12
* most ROMs that based on this ROM are also supported. Despite of that some ROMs are supported, they can work incorrectly due to difference in their initramfs scripts(ramdisk).
1. Install needed ROM first,
2. Type following command in terminal emulator:
Code:
cd /
find . -xdev | cpio -o -Hnewc | gzip -9 > /sdcard/x.y.z.cpio.gz
where x.y.z is OS version (for example - CM11-based ROM - 4.4.4.cpio.gz)
3. put this file in installer at osfiles/x.y.z/ (e.g. osfiles/4.4.4/4.4.4.cpio.gz)
4. install kernel
To install a new ROM that is not F2FS compatible:
Use EXT4 to F2FS converter script
or edit the updater-script as follows
(manual method)
1. Replace strings
"mount("ext4", "EMMC", "/dev/block/mmcblk0p3", "/system");"
with string
"run_program("/sbin/busybox", "mount", "/system");"
2. Replace string
"format("ext4", "EMMC", "/dev/block/mmcblk0p3", "0", "/system");"
with string
"run_program("/sbin/mkfs.f2fs", "/dev/block/mmcblk0p3");"
3. Add string
"run_program("/sbin/busybox", "mount", "/data");"
after strings
"run_program("/sbin/mkfs.f2fs", "/dev/block/mmcblk0p3");"
"run_program("/sbin/busybox", "mount", "/system");"
4. Add string
"unmount("/data");"
before string
unmount("/system");
Click to expand...
Click to collapse
Fix for CodinaP, recognized as Codina in recovery (thanks @fluffi444 )
http://forum.xda-developers.com/showpost.php?p=58839849&postcount=2448
Various tweaks (thanks @xo.en )
xo.en said:
do NOT use swapiness more than 30, bigger values can bog machine down!
small advice:
Code:
#!/system/bin/sh
#chmod -R 755 /system/etc/init.d
chown root:root /proc/sys/vm;
echo "30" > /proc/sys/vm/swappiness;
busybox chmod ugo+rw /proc/sys/vm/vfs_cache_pressure;
echo "50" > /proc/sys/vm/vfs_cache_pressure;
echo "2000" > /proc/sys/vm/dirty_expire_centisecs;
echo "1500" > /proc/sys/vm/dirty_writeback_centisecs;
busybox chmod ugo+rw /proc/sys/vm/dirty_ratio;
echo "90" > /proc/sys/vm/dirty_ratio;
busybox chmod ugo+rw /proc/sys/vm/dirty_background_ratio;
echo "75" > /proc/sys/vm/dirty_background_ratio;
echo "512" > /sys/devices/virtual/bdi/default/read_ahead_kb;
echo "10" > /proc/sys/fs/lease-break-time;
echo "4" > /proc/sys/vm/page-cluster;
echo "5360" > /proc/sys/vm/min_free_kbytes;
echo "8" > /proc/sys/vm/min_free_order_shift;
echo "0" > /proc/sys/vm/oom_kill_allocating_task;
echo "1" > /proc/sys/vm/overcommit_memory
busybox sysctl -w kernel.random.write_wakeup_threshold=256;
busybox sysctl -w kernel.random.read_wakeup_threshold=1376;
and
Code:
#!/system/bin/sh
chmod 0644 /sys/module/lowmemorykiller/parameters/adj
echo "0,3,6,10,12,15" > /sys/module/lowmemorykiller/parameters/adj;
chmod 0644 /sys/module/lowmemorykiller/parameters/minfree
echo "1024,2048,2560,4096,6144,8192" > /sys/module/lowmemorykiller/parameters/minfree;
chmod 0644 /sys/module/lowmemorykiller/parameters/debug_level
echo "0" > /sys/module/lowmemorykiller/parameters/debug_level;
works miracles in my case, especially second one, imho it would be hard to use different values, i was trying different setups for YEARS(with this machine), so it is not just random throw. Bigger LMK REALLY makes things worse here. It usually has tremendous influence over fluidity of gui, and whole sys.
Click to expand...
Click to collapse
Odin kernel
with TWRP
with CWM
There is no KSM or Low Memory killer or any Performance tweaks ?? Built in CWM ?
Master-ZizO said:
There is no KSM or Low Memory killer or any Performance tweaks ?? Built in CWM ?
Click to expand...
Click to collapse
This kernel based on stock CM kernel by TeamCanjica, and it's have same changes.
Damn, I was so excited to see a new kernel, but I noticed that it's actually for 4.1.2. I almost flashed it on a 4.4.3, not that it would have been such a tragedy.
Is there gonna be a version for the KitKat ROMs?
dragos281993 said:
Is there gonna be a version for the KitKat ROMs?
Click to expand...
Click to collapse
yes, please wait a little bit.
ChronoMonochrome said:
yes, please wait a little bit.
Click to expand...
Click to collapse
OK. I've got another question for you. Are you gonna add "lagfree" between the governors you already added, because that's probably one of the best governors a kernel can have ?
This is for stock samsung JB?
yes it is
Even if in the download section it says 4.4.2, I flashed the kernel on a Carbon 4.4.3 and it's working like a charm. The only thing that doesn't show up correctly is both frequency bars in "performance". It shows 0MHz max, 0MHz minimum, but if you set the minimum to 600MHz, for example, the frequency will run at 600 minimum, even if it shows 0.
five attempts and each time bootloop and recovery keys do not work.
dragos281993 said:
The only thing that doesn't show up correctly is both frequency bars in "performance". It shows 0MHz max, 0MHz minimum, but if you set the minimum to 600MHz, for example, the frequency will run at 600 minimum, even if it shows 0.
Click to expand...
Click to collapse
It works normally for me. (ROM CM11 by TeamCanjica 4.4.2)
dragos281993 said:
OK. I've got another question for you. Are you gonna add "lagfree" between the governors you already added, because that's probably one of the best governors a kernel can have ?
Click to expand...
Click to collapse
Maybe I'll add this Governor.
mPiter said:
five attempts and each time bootloop and recovery keys do not work.
Click to expand...
Click to collapse
please post your last_kmsg log.
@ChronoMonochrome how do I do ksmg log when the phone does not turn on?
ChronoMonochrome said:
It works normally for me. (ROM CM11 by TeamCanjica 4.4.2)
Maybe I'll add this Governor.
please post your last_kmsg log.
Click to expand...
Click to collapse
If you added "lagfree", you'd be the first on to do it, so it would obviously be amazing and it would make you a better developer than others, of course.
EDIT: About the frequency thing, for me it shows 0MHz probably because I've got kitkat 4.4.3. Everything else's working fine.
@mPiter ,
Bug reports:
after experiencing a random reboot, type in terminal:
Code:
su
cat /proc/last_kmsg > /storage/sdcard0/last_kmsg.txt
report it in the thread and attach the last_kmsg.txt
Click to expand...
Click to collapse
p.s. restore stock kernel first.
there is a new folder in sdcard0 : triggers and files in it ( Cpt log). what is it?
ip3000 said:
there is a new folder in sdcard0 : triggers and files in it ( Cpt log). what is it?
Click to expand...
Click to collapse
I have no idea what caused this problem. Because on stock kernel and CM kernel i did not have this problem. Try to remove this folder and create text file with same name.
Would love to see lag free if anyone could make possible
Sent from my GT-I8160 using Tapatalk
1. Compatible for aosp 4.4.4 or only for CM?
2. Whats is the different with custom kernel by zwliew?
@ChronoMonochrome
BRAVEKERNEL REFRESH
Here we go with something (re)fresh, this is the thread of a customized kernel for KitKat ROMs (CM11, AOSX, SlimKat...) with some extra features added.
As always, feedback is welcome and highly valuable
Please if a bug is already reported do not spam the thread reporting it again, and use XDA DevDB tools for posting features requests and bug reports if it's possible :good:
Main features are these:
- Based in 6.2.A.1.100 source code
- Built with Linaro Toolchain 4.9.3 optimized for Cortex A9
- TWRP 2.8.4.0
- FRandom support
- Improvement in I/O latency
- Interactive governor updated to 3.4
- VFP optimizations
- PowerOn Key emulator
- ABBamp Sound Control v2.5.0
- Mali tweaks and controllers
- Governors and I/O schedulers parameters tweaked
- Cycle Charging control
- Real end-of-charge notification
- FSync control (combined dynamic fsync control)
- Voltage OTG control
- Added extra free kbytes tunable
- Swap and zRAM support
- Disabled dynamic debug
- Tweaked readahead size
- More choices of TCP congestions
- Proportional Rate Reduction for TCP
- Fix for scaling of minimum frequency problem
- Built with optimized -O3 & Neon flags
- SLUB memory allocator
- Ramdisk and kernel compressed with LZO
Available CPU governors:
- Powersave
- Userspace
- OnDemand
- Interactive (default)
- InteractiveQ
- Conservative
- OnDemandQ
- PegasusQ
- LulzActiveQ
- AbyssPlug
- HotPlug
- PegasusQPlus
- SmartAssv2
Available I/O schedulers:
- No-op
- Deadline
- CFQ
- ROW
- BFQ
- SIO
- ZEN
- V(R)
- SIO-Plus (default)
Kernel Downloads for KitKat:
BraveKernel Refresh KK-4.4 MediaFire Folder
- v1.3 -
for CM 11.0, AOSX, SlimKat...
How to install the kernel:
1) Download the kernel zip file to SD card
2) Reboot to recovery
3) Flash the kernel zip file
4) Wipe cache and dalvik cache if you are coming from another kernel
5) Reboot the system
Kernel Manager APP
If you prefer to use a simpler way for installing the kernel you can use this app, it allows you to make a backup of your current kernel and it also displays OTA updates of this kernel, really recommended :good:
Kernel sources (on GitHub):
Development repository of BraveKernel 3.0.101 for KK 4.4
Changelog:
Code:
[B]08/02/2015 - BraveKernel Refresh v1.3 for KitKat[/B]
- Added minfree tweak in crontab
- Disabled management of not killable processes
- Tweaked adj and minfree values in init.d
- Added memory tweak in crontab
- Tweaked read_ahead_kb values
- Added F2FS support
- Fixed network arrows and speed information
- Fixed root and storage issues
- Added recovery in FOTA partition support
- Added kexec hardboot support
- Added 3 extra MB of usable RAM
- Added dynamic management of dirty page writebacks
- Added Ultra KSM
- Added entropy tweaks
- Updated BFQ scheduler
- Updated Linaro toolchain
- Improved LZO decompression
- Tweaked LMK
- Improved network speed
- Improved CPU performance
- Improved EXT4 speed
- Improved power management
- Tweaked memory management values
- Enabled clean cache
- Enabled JRCU
[B]21/12/2014 - BraveKernel Refresh v1.0 for KitKat[/B]
- Initial release
Credits and thanks to:
munjeni and cocafe for their awesome work and their kernel sources
AGONTUK for TWRP recovery
CyanogenMod, Kernel.org, Sony, Google, Linaro GCC developers
All my testers
XDA:DevDB Information
BraveKernel Refresh, Kernel for the Sony Xperia Go
Contributors
Garcia98
Kernel Special Features: Customized kernel 3.0.101 for KK 4.4.x ROM
Version Information
Status: Stable
Current Stable Version: v1.3
Stable Release Date: 2015-02-08
Created 2014-12-24
Last Updated 2016-06-10
HOW TOs
HOW TO PLAY WITH THIS KERNEL
Terminal emulator or ADB shell is needed.
If any command outputs 'Permission denied', you need su permission.
`???` stands for the number to input.
F2FS:
To enable F2FS:
1) Reboot into recovery
2) Touch Wipe option > Advanced Wipe
3) Select the partition you want to convert to F2FS (Data or Cache)
4) Select Repair or Change File System option
5) Touch Change File System and then select F2FS
Boot time:
To check boot time:
Code:
cat /sys/boottime/kernel
CPU governors:
Performance, Interactive (default), Powersave, Userspace, Conservative, InteractiveQ, PegasusQ, HotPlug, OnDemandQ, OnDemand, AbyssPlug, LulzactiveQ, SmartAssv2
- OnDemand has been patched with cpu idle detection.
- Most of custom governors are based on ondemand/interactive.
- OndemandQ/InteractiveQ will hotplug cpu when screen turns off only.
- If you care about the battery life time, choose HotPlug. It hotplugs cpu frequently.
- Interactive updated to linux-android-3.4 (recommended).
- LulzactiveQ, will hotplug CPU1.
I/O schedulers:
SIO, SIO-Plus, VR, BFQ, CFQ, NO-OP, ZEN, ROW, Deadline
- Default IO scheduler: SIO-Plus
- SIO/ROW/SIO-Plus recommended!
FRandom module:
Code:
insmod /system/lib/modules/frandom.ko
chmod 0666 /dev/frandom
chmod 0666 /dev/erandom
mv /dev/random /dev/random.orig
mv /dev/urandom /dev/urandom.orig
ln -s /dev/frandom /dev/random
ln -s /dev/frandom /dev/urandom
Deepest sleep state:
Stock: 3 Default: 3
Deepest supported is 5.
To change deepest sleep state:
Code:
echo 5 > /d/cpuidle/deepest_state
- HotPlug governors works badly with 5.
- OnDemand works well with 5.
- Please note that it won’t increase the using time but standby time.
- You can add an init.d script to tweak it if you want.
To check the cpuidle state:
Code:
cat /d/cpuidle/stats
zRAM:
zRAM is optimized for Android. It is not lazy anymore. Recommended zRAM instead of SWAP.
Using zRAM will take a little CPU, because it needs to compress/decompress memory.
Recommended compressing about 18% of RAM, about 100MB.
Setup disk size first: (example: 200MB)
Code:
echo $((200 * 1024 * 1024)) > /sys/block/zram0/disksize
- Larger size more RAM will be compressed.
- Too large size might make phone lag
To enable:
Code:
mkswap /dev/block/zram0
swapon /dev/block/zram0
To check how many does it use:
Code:
cat /sys/block/zram0/num_reads
cat /sys/block/zram0/num_writes
cat /proc/meminfo | grep swap
- We can get other info in its sysfs
Swap:
Using a file as swap RAM: (Create a continuity file first)
Code:
su
cd /cache
dd if=/dev/zero of=swapfile bs=1024 count=81920
mkswap swapfile
swapon swapfile
Then we will have 80MB of swap RAM.
Cycle Charging Control:
Similar to BLX by Ezekeel. It can be used to limit the battery charging level.
Example: Limit the battery level at 70% ~ 75%
Enable:
Code:
echo on > /sys/kernel/abb-fg/fg_cyc
Disable:
Code:
echo off > /sys/kernel/abb-fg/fg_cyc
Discharging threshold (battery level %):
Code:
echo dischar=75 > /sys/kernel/abb-fg/fg_cyc
Recharging threshold:
Code:
echo dischar=70 > /sys/kernel/abb-fg/fg_cyc
Real charged notification:
Well, please let me call it notification.
To be honest, it needs to check manually:
Code:
cat /sys/kernel/abb-chargalg/eoc_status
- You can use Root Browser to view these files in /sys/kernel/abb-chargalg
- When it says "First eoc reached", then the UI should show you charged 100%, but it is not the real full charged.
- When it says the real EOC reached, unplug the charger.
POnKey Emulator:
This is the software emulator of power key.
To turn off screen: ( 20 < value(ms) < 520 )
Code:
echo 100 > /sys/kernel/abb-ponkey/emulator
To active the power menu: ( 520 < value(ms) < ∞)
Code:
echo 800 > /sys/kernel/abb-ponkey/emulator
ABBamp Audio:
Please note that listening to too high volume music over 1 hour or more can damage your ears.
Too high volume can make your external speakers/headset overload or damage them.
First, why is it called `AMP`?
Because most of our tweaks are about gain(volume)
Our codec is simple, It doesn't have any hardware EQ (although i want...)
ABBamp sysfs entries are in:
/sys/kernel/abb-codec
- Use Root Browser to view this folder,there are lots files
Tweaks will take effects immediately!
Most tweaks will accept inputs like "on", "off" (no quotes)...
So, say "on" to enable this tweak, then this tweak will apply the value stored/inputed
View (cat) these files, most of them will give you useful information about this tweak.
They will show you the volume in dB of gain
`cd` to /sys/kernel/abb-codec first then do echos, will be more convenient.
AnaGain3 (Headset analog gain path):
Enable tweaks:
Code:
echo on > /sys/kernel/abb-codec/anagain3
Disable tweaks:
Code:
echo off > /sys/kernel/abb-codec/anagain3
Gain control: (min:0 ,max: 15) Lower value,higher volume (default: 0[+4dB])
Code:
echo left=?? > /sys/kernel/abb-codec/anagain3
echo right=?? > /sys/kernel/abb-codec/anagain3
Write both left and right channels:
Code:
echo gain=?? > /sys/kernel/abb-codec/anagain3
HsLDigGain (Headset left digital path gain):
Enable tweaks:
Code:
echo on > /sys/kernel/abb-codec/hsldiggain
Disable tweaks:
Code:
echo off > /sys/kernel/abb-codec/hsldiggain
Gain control: (min:0 ,max: 15) Lower value,higher volume (default: 4[+4dB])
Code:
echo gain=?? > /sys/kernel/abb-codec/hsldiggain
HsRDigGain (Headset right digital path gain):
Enable tweaks:
Code:
echo on > /sys/kernel/abb-codec/hsrdiggain
Disable tweaks:
Code:
echo off > /sys/kernel/abb-codec/hsrdiggain
Gain control: (min:0 ,max: 15) Lower value,higher volume (default: 4[+4dB])
Code:
echo gain=?? > /sys/kernel/abb-codec/hsrdiggain
Headset Volume Table:
value | volume
0.......+8dB (maximum)
1.......+7dB
2.......+6dB
3.......+5dB
4.......+4dB (tweaks default)
5.......+3dB
6.......+2dB
7.......+1dB
8.......+0dB (device default)
>=9....mute
- If set up digital path +4dB, analog gain +4dB, the result will get over +8dB
HsLowPow (Headset driver low power mode):
This lowpow mode is enabled by device normally.
If you want high performance audio instead of LPA(low power audio) you can disable it.
Enable tweaks:
Code:
echo on > /sys/kernel/abb-codec/hslowpow
Disable tweaks:
Code:
echo off > /sys/kernel/abb-codec/hslowpow
To tweak the mode (0: disable LP mode, 1: enable LP mode)
Code:
echo mode=? > /sys/kernel/abb-codec/hslowpow
HsDacLowPow (Headset DAC low power mode):
DAC is Digital-to-Analong Converter.
This lowpow mode is enabled by device normally.
Enable tweaks:
Code:
echo on > /sys/kernel/abb-codec/hsdaclowpow
Disable tweaks:
Code:
echo off > /sys/kernel/abb-codec/hsdaclowpow
To tweak the mode (0: disable LP mode, 1: enable LP mode)
Code:
echo mode=? > /sys/kernel/abb-codec/hsdaclowpow
HsHpEn (Headset high pass filter):
This high pass filter is disabled by device normally.
Enable this can reduce some sub-noise of audio.
Enable tweaks:
Code:
echo on > /sys/kernel/abb-codec/hshpen
Disable tweaks:
Code:
echo off > /sys/kernel/abb-codec/hshpen
To tweak the mode (0: disable highpass filter, 1: enable highpass filter)
Code:
echo mode=? > /sys/kernel/abb-codec/hshepen
Besides, the file anaconf1 will shows you the status of LPA
ClassDHPG (ClassD high-pass gain):
ClassD is a kind of amplifier.
According to the documents, our ClassD only relate to Handsfree(speaker).
This can increase the high frequencies sound of speaker
Enable tweaks:
Code:
echo on > /sys/kernel/abb-codec/classdhpg
Disable tweaks:
Code:
echo off > /sys/kernel/abb-codec/classdhgp
Gain control: (min:0 ,max: 10) higher value,higher gain (default: 10[Max gain])
Code:
echo gain=?? > /sys/kernel/abb-codec/classdhpg
ClassDDithWGain:
Gain control for the white component of dithering filter
Enable tweaks:
Code:
echo on > /sys/kernel/abb-codec/classdwg
Disable tweaks:
Code:
echo off > /sys/kernel/abb-codec/classdwp
Gain control: (min:0 ,max: 10) higher value,higher gain (default: 10[Max gain])
Code:
echo gain=?? > /sys/kernel/abb-codec/classdwg
ADDigGain2:
This is the audio path of mic2(phone mic, not headset mic)
This tweak will enable automatically when mic2 is enabled by device
Enable tweaks:
Code:
echo on > /sys/kernel/abb-codec/addiggain2
Disable tweaks:
Code:
echo off > /sys/kernel/abb-codec/addiggain2
Gain control: (min:0 ,max: 63) lower value, higher gain (default: [+6dB], max: 00[+31dB])
Code:
echo gain=?? > /sys/kernel/abb-codec/addiggain2
EarDigGain:
This is the digital gain of earpiece
Enable tweaks:
Code:
echo on > /sys/kernel/abb-codec/eardiggain
Disable tweaks:
Code:
echo off > /sys/kernel/abb-codec/eardiggain
Gain control: (min:0 ,max: 15) lower value,higher gain (default: 4[+4dB])
Code:
echo gain=?? > /sys/kernel/abb-codec/classdwg
- It uses the same path of HsLDigGain,please check the volume table of HsLDigGain
- +8 dB might crash the sound of earpiece
ShortCirConf:
Code:
This is a misc tweak
View shortcir this file first
[7] EnShortPWD
0: Automatic switch off on short circuit detection is disabled
1: Automatic switch off on short circuit detection is enabled
[6] EarShortDis
0: Short circuit detection on Ear driver enabled
1: Short circuit detection on Ear driver disabled
[5] HsShortDis
0: Short circuit detection on HsL and HsR drivers enabled
1: Short circuit detection on HsL and HsR drivers disabled
[4] HsPullDEn
0: HsL and HsR outputs are in high impedance
1: HsL and HsR outputs are pulled down to ground
[2] HsOscEn (ABBamp enables it by default)
0: The HS drivers use the system clock
1: The HS drivers use a local oscillator (system clock absent: analog path only)
[1] HsFadDis
0: All intermediate steps are applied between two programmed gains (fading)
1: Gain on HS is applied immediately
[0] HsZcdDis
0: HS gain changes on signal zero cross (unless time-out occurs)
1: HS gain is changed without zero cross control
[CODE]echo ?? ?? > /sys/kernel/abb-codec/shortcir
- The first ?? the slot of each option,the second ?? stands for the value to write to this slot
- View shortcir this file,you will get it[/CODE]
AnaConf4:
This interface controls the enables of analog path
We can use it to disable Speaker in kernel level.
So that you don't have to use the "mute all sound" in system settings,
Because, "mute all sound" will also mute Earpiece, which is inconvenient for us in calls.
Command format: Check anaconf4 first, This interface is a bit different from others:
Code:
echo [Index] [Disable?] > anaconf4
To Disable Speaker:
Code:
echo 5 1 > anaconf4
To Enable Speaker:
Code:
echo 5 0 > anaconf4
Headset Charge Pump:
Code:
echo 0 > chargepump to use fixed 1.8V supply.
echo 1 > chargepump to use dynamic voltage supply, lower power cost.
Lower-power Audio Mode:
Code:
echo on > lpa_mode to enable LPA mode
echo vape=0x?? > lpa_mode to adjust Vape voltage used in LPA mode
Experts!:
This method can work on any ab850x codec platform!
cd /d/asoc/U8500-card/ab8500-codec.0
Play music, reduce the volume.
Now we are going to edit the codec registers.
Code:
echo REG VAL > codec_reg
E.G:
AnaGain3:
Code:
echo 0x16 0x00 > codec_reg
HsDigGain: (left/right channel)
Code:
echo 0x4F 0x00 > codec_reg
echo 0x50 0x00 > codec_reg
Disable all lowpow mode:
Code:
echo 0x04 0x00 > codec_reg
- These hacks will restore when codec power off.
Camera LED Flash:
Turn on torch with more brightness, turning this on for a long time will heat up your device, be careful!
Enable/Disable:
Code:
echo 1/0 > /sys/devices/platform/nmk-i2c.2/i2c-2/2-0053/torch_enable
echo 149600 > /sys/devices/platform/nmk-i2c.2/i2c-2/2-0053/torch_current
FSync control:
Get current status:
Code:
cat /sys/kernel/fsync/mode
FSYNC modes:
0: fsync on
1: fsync off
2: fsync dyn
Disable FSYNC:
Code:
echo 1 > /sys/kernel/fsync/mode
Disabling fsync can improve I/O performance, but it can make the data which hasn't been written lose when a sudden power cut occurs.
Enable Dynamic FSYNC:
Code:
echo 2 > /sys/kernel/fsync/mode
- Dynamic fsync will sync all buffers when screen turns off.
- If there is a heavy I/O load, the screen might get stuck for seconds.
Mali GPU:
Mali debug level:
Disabling can speed up a bit
Code:
echo 0 > /sys/module/mali/parameters/mali_debug_level
- Higher level, more messages will be printed in dmesg, system will slow down
Mali L2 max reads control: (Stock:28kb,Default:48kb(max))
Code:
echo xx > /sys/module/mali/parameters/mali_l2_max_read
- Some values will slow down graphics
- If not sure, keep default
Mali PM sampling rate: (Default: 1000ms)
Code:
echo xx > /sys/module/mali/parameters/mali_pm_sampling_rate
Mali PP scheduler tweaks: (Default: disable)
Code:
echo 1 > /sys/module/mali/parameters/mali_pp_scheduler_balance_jobs
- Enabling this, some places will over ahead, choose by yourself
Mali Utilization sampling rate: (Stock:500ms, Default:1000ms)
How often report a mali utilization.
Code:
echo xxx > /sys/module/mali/parameters/mali_utilization_sampling_rate
- Keep this default if unsure.
Mali utilization control:
(Default: low_to_high 192 high_to_low 64)
Our driver will report a mali utilization frequently.
This utilization(range: 0~255) means the load of mali.
If utilization is bigger than low_to_high, driver will request higher hardware performance(highest APE/DDR OPP).
If utilization is smaller than high_to_low, the driver will store the requested OPP(uses low OPP).
OPP can be understood as freq simply.
To check mali utilization values:
Code:
echo 5 > /sys/module/mali/parameters/mali_debug_level
cat /proc/kmsg | grep -i utilization
When it says SIGNAL_HIGH, it will request highest OPP.
When it says SIGNAL_LOW, it will request lowest OPP.
Press Ctrl+C to stop printing.
You can reduce low_to_high to trigger higher OPP requirement.
For smoothness and less powersaving:
Set low_to_high between 100-192.
Code:
echo 120 > mali_utilization_low_to_high
Mali max preemptive allocated max memory size:
Default is 16mb(16*1024*1024), bigger max size more throughput.
But when this value is too big, no more throughput.
For example: 48mb = 48*1024*1024
Code:
echo 50331648 > /sys/module/mali/parameters/pre_allocated_memory_size_max
Mali OS Kernel memory allocation order:
The lower value, the higher preference of allocating OS memory.
The default value is 6, I decreased it to 9 to fix OS memory allocation failure.
If you feel laggy, try 6 (default by driver)
Code:
echo 6 > /sys/module/mali/parameters/mali_oskmem_allocorder
TCP congestions:
Supported:
cubic(default), westwood, highspeed, vegas, veno, yeah
To check all the available options:
Code:
busybox sysctl net.ipv4.tcp_available_congestion_control
To change to other option:
Code:
busybox sysctl -w net.ipv4.tcp_congestion_control=YOU_WANT_TO
Latency - Download - Upload
cubic:
1st run: 15ms - 10,75Mbps - 7,82Mbps
2nd run: 14ms - 10,84Mbps - 8,06Mbps
westwood:
1st run: 11ms - 17,65Mbps - 8,30Mbps
2nd run: 13ms - 13,28Mbps - 8,29Mbps
highspeed:
1st run: 13ms - 10,76Mbps - 7,94Mbps
2nd run: 16ms - 14,42Mbps - 8,52Mbps
vegas:
1st run: 14ms - 8,49Mbps - 6,62Mbps
2nd run: 14ms - 12,00Mbps - 7,07Mbps
veno:
1st run: 13ms - 9,58Mbps - 8,13Mbps
2nd run: 13ms - 8,50Mbps - 7,64Mbps
yeah:
1st run: 14ms - 13,37Mbps - 8,28Mbps
2nd run: 17ms - 13,89Mbps - 8,14Mbps
- In fact, every congestion is designed for different environments.
- Google to learn more!
EGL Driver:
To use Mali hardware egl driver only:
Edit /system/lib/egl.cfg
0 0 android
0 1 mali
To
0 0 mali
Then remove libGLES_android.so
- Recommend to backup these files
- In case it cannot boot,use TWRP file manager to recover changes
Logcat:
Create a new file(empty file) named logger in /data
When this file exists, kernel will load logger.ko for you automatically
Miscellaneous:
To refresh battery stats:
Code:
echo 1 > /sys/kernel/abb-fg/fg_refresh
Almost all tweaks will be restored to default after reboots.
So you can make your tweaks as init.d scripts or make scripts with SManager app to apply them at boot.
Just flash in my Xperia Go. Boot fine, and work just fine. Need some time to tune and test the battery and smoothness. :good::good::good:
Does it work on stock 6.2.A.1.100? If yes, controindications?
Rob80 said:
Does it work on stock 6.2.A.1.100? If yes, controindications?
Click to expand...
Click to collapse
No, it just works with KitKat ROMs
Sent from my D5503 using XDA Free mobile app
Merry Christmas and happy holidays to all of you!
Any status of new kernel update?
BelzIgoh said:
Any status of new kernel update?
Click to expand...
Click to collapse
I need a tester
Sent from my D5503 using XDA Free mobile app
you can still send me Kernels to try out
Garcia98 said:
I need a tester
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
I can help you to test.
Brave Kernel Xperia Go Test
The test kernel boot fine.
Using the test kernel for a day. Kernel work awesomely.
Only found out that Interactive governor tunables not optimize for xperia go.
The governor not tune according to xperia go cpu, the tuneable are the same with my nexus 5
So i change the hispeed freq from 1190400 to 1000000, etc...
Now gonna test the kernel battery life, will let the phone idle for over night and then see the battery usage.
New release is out!
Version 1.3 of BraveKernel Refresh is out!
This version fixes the few bugs of the previous version and includes many new features like F2FS, look at second post for learning how to use this feature
Download the zip below and flash it in recovery or install it using Kernel Manager app
Download:
BraveKernel-Refresh_v1.3-lotus.zip
Changelog:
Code:
[B]08/02/2015 - BraveKernel Refresh v1.3 for KitKat[/B]
- Added minfree tweak in crontab
- Disabled management of not killable processes
- Tweaked adj and minfree values in init.d
- Added memory tweak in crontab
- Tweaked read_ahead_kb values
- Added F2FS support
- Fixed network arrows and speed information
- Fixed root and storage issues
- Added recovery in FOTA partition support
- Added kexec hardboot support
- Added 3 extra MB of usable RAM
- Added dynamic management of dirty page writebacks
- Added Ultra KSM
- Added entropy tweaks
- Updated BFQ scheduler
- Updated Linaro toolchain
- Improved LZO decompression
- Tweaked LMK
- Improved network speed
- Improved CPU performance
- Improved EXT4 speed
- Improved power management
- Tweaked memory management values
- Enabled clean cache
- Enabled JRCU
So far the kernel is working great. Over next week I'll be able to tell the approximate battery drain for my Go.
Only problem is with the recovery - the touch responses are not working as they should, for example, I can't use sliders (to accept zip flash or related) and buttons when pressed act weird. Any clues how to fix this?
This kernel is fantastic
Garcia98 said:
BRAVEKERNEL REFRESH
Here we go with something (re)fresh, this is the thread of a customized kernel for KitKat ROMs (CM11, AOSX, SlimKat...) with some extra features added.
As always, feedback is welcome and highly valuable
Please if a bug is already reported do not spam the thread reporting it again, and use XDA DevDB tools for posting features requests and bug reports if it's possible :good:
Main features are these:
- Based in 6.2.A.1.100 source code
- Built with Linaro Toolchain 4.9.3 optimized for Cortex A9
- TWRP 2.8.4.0
- FRandom support
- Improvement in I/O latency
- Interactive governor updated to 3.4
- VFP optimizations
- PowerOn Key emulator
- ABBamp Sound Control v2.5.0
- Mali tweaks and controllers
- Governors and I/O schedulers parameters tweaked
- Cycle Charging control
- Real end-of-charge notification
- FSync control (combined dynamic fsync control)
- Voltage OTG control
- Added extra free kbytes tunable
- Swap and zRAM support
- Disabled dynamic debug
- Tweaked readahead size
- More choices of TCP congestions
- Proportional Rate Reduction for TCP
- Fix for scaling of minimum frequency problem
- Built with optimized -O3 & Neon flags
- SLUB memory allocator
- Ramdisk and kernel compressed with LZO
Available CPU governors:
- Powersave
- Userspace
- OnDemand
- Interactive (default)
- InteractiveQ
- Conservative
- OnDemandQ
- PegasusQ
- LulzActiveQ
- AbyssPlug
- HotPlug
- PegasusQPlus
- SmartAssv2
Available I/O schedulers:
- No-op
- Deadline
- CFQ
- ROW
- BFQ
- SIO
- ZEN
- V(R)
- SIO-Plus (default)
Kernel Downloads for KitKat:
BraveKernel Refresh KK-4.4 Folder
- v1.3 -
for CM 11.0, AOSX, SlimKat...
How to install the kernel:
1) Download the kernel zip file to SD card
2) Reboot to recovery
3) Flash the kernel zip file
4) Wipe cache and dalvik cache if you are coming from another kernel
5) Reboot the system
Kernel Manager APP
If you prefer to use a simpler way for installing the kernel you can use this app, it allows you to make a backup of your current kernel and it also displays OTA updates of this kernel, really recommended :good:
Kernel sources (on GitHub):
Development repository of BraveKernel 3.0.101 for KK 4.4
Changelog:
Code:
[B]08/02/2015 - BraveKernel Refresh v1.3 for KitKat[/B]
- Added minfree tweak in crontab
- Disabled management of not killable processes
- Tweaked adj and minfree values in init.d
- Added memory tweak in crontab
- Tweaked read_ahead_kb values
- Added F2FS support
- Fixed network arrows and speed information
- Fixed root and storage issues
- Added recovery in FOTA partition support
- Added kexec hardboot support
- Added 3 extra MB of usable RAM
- Added dynamic management of dirty page writebacks
- Added Ultra KSM
- Added entropy tweaks
- Updated BFQ scheduler
- Updated Linaro toolchain
- Improved LZO decompression
- Tweaked LMK
- Improved network speed
- Improved CPU performance
- Improved EXT4 speed
- Improved power management
- Tweaked memory management values
- Enabled clean cache
- Enabled JRCU
[B]21/12/2014 - BraveKernel Refresh v1.0 for KitKat[/B]
- Initial release
Credits and thanks to:
munjeni and cocafe for their awesome work and their kernel sources
AGONTUK for TWRP recovery
CyanogenMod, Kernel.org, Sony, Google, Linaro GCC developers
All my testers
XDA:DevDB Information
BraveKernel Refresh, Kernel for the Sony Xperia Go
Contributors
Garcia98
Kernel Special Features: Customized kernel 3.0.101 for KK 4.4.x ROM
Version Information
Status: Stable
Current Stable Version: v1.3
Stable Release Date: 2015-02-08
Created 2014-12-24
Last Updated 2015-02-08
Click to expand...
Click to collapse
Hello author kernel . I apologize for my English , I do not know him at all , I use a translator from google. I'm from Russia , the kernel on my phone is slow . after the installation has decreased the amount of RAM . please in the development of the next version of the kernel fix it
BigLionXda said:
Hello author kernel . I apologize for my English , I do not know him at all , I use a translator from google. I'm from Russia , the kernel on my phone is slow . after the installation has decreased the amount of RAM . please in the development of the next version of the kernel fix it
Click to expand...
Click to collapse
Your total RAM decrease or low free RAM?
For my Xperia GO, total RAM available is 390MB.
Usually 272MB used, 118MB free.
TWRP 2.8.5.0
Hi! I bring you TWRP 2.8.5.0
To change your recovery:
1.- Open ADB shell or terminal emulator
2.- Download this file: recovery.img
3.- Run:
Code:
su
dd if=recovery.img of=/dev/block/mmcblk0p13
4.- Reboot to recovery.
Garcia98 said:
Hi! I bring you TWRP 2.8.5.0
To change your recovery:
1.- Open ADB shell or terminal emulator
2.- Download this file: recovery.img
3.- Run:
Code:
su
dd if=recovery.img of=/dev/block/mmcblk0p13
4.- Reboot to recovery.
Click to expand...
Click to collapse
Awesome. :good::good::good: Thanks for the update.
Is it work if I use fastboot flash recovery recovery.img?
Any plans of making a BraveKernel for Lollipop?
BelzIgoh said:
Awesome. :good::good::good: Thanks for the update.
Is it work if I use fastboot flash recovery recovery.img?
Click to expand...
Click to collapse
No, you can't use fastboot for installing recovery
luimx said:
Any plans of making a BraveKernel for Lollipop?
Click to expand...
Click to collapse
To be honest, no
Sent from my D5503 using XDA Free mobile app
[PORT]LegenD with working ART
DOWNLOAD LINKS: http://d-h.st/aidk
NOTE:
Kernel with GPU OC 476 Mhz (working not to all). If you have not overclocked the GPU, you can flash the kernel phoenix5.
At the kernel added function to force a reboot by holding the power buttonfor 8 seconds. No need to remove the battery.
In kernel included intelli_plug, sweep2wake/Sweep2Sleep, doubletap2wake
To enable/disable functions used script kernel_settings in systems/etc/init.d (open in RootExplorer kernel_settings in a text editor)
1. in line echo 0 > /sys/android_touch/sweep2wake
change 0 to 1 to enable Sweep2Wake only
change 0 to 2 to enable Sweep2Wake + Sweep2Slep
change 0 to 3 to enable Sweep2Slep only
0 - disable
2. In line echo 0 > /sys/android_touch/doubletap2wake
change the 0 to 1 to enable doubletap2wake
0 - disable
This script will save the settings after a reboot, no need to use third-party programs
To activate ART:
Go to settings - about phone - and quickly press a few times on the "Build number". And change from libdvm.so to libart.so
ROM have xposed in system apps. Before activate ART delete xposed in Rootexplorer or disable,i.e. in TitaniumBackup
Original ROM http://forum.turkdevs.com/konu-4-4-2-art-legend-rom-v11-android-l-edition.html
Base ROM http://forum.xda-developers.com/mic...pment/kitkat-4-4-2-rom-micromax-a116-t2925056
Kernel sources:
https://github.com/hyperion70/tinno89_wet_kk
Credits:
hyperion70 -For his Kernel for MT6589 and Base ROM
Bugra333 and other devs from turkdevs.com for original ROM
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
hey this rom my rom
source rom link=> http://forum.turkdevs.com/konu-4-4-2-art-legend-rom-v11-android-l-edition.html
please add source link
Does this ROM supports Theme?
How to increase volume in this ROM.
MediavVolume is too low.
This is just a proof of concept for "if we like a Kernel but don't like the default setting and too lazy to use kernel adiutor to apply the desirable setting"
Basically I just changed the Late Autumn installer zip using the goodies from Zetsubou. So this is a Late Autumn kernel with my modifications to ramdisk.
Here's the difference:
1. Enable doubletap2wake by default
2. Set CPU maximum frequency to 1401600
3. Set CPU minimum frequency to 200000
4. Set GPU maximum frequency to 550000
5. Set GPU minimum frequency to 100000
6. Enable MSM CPU hotplug by default
7. Disable GPU Adreno idle by default
Warning:
Only tested on lineage-14.1-20170126-nightly-wt88047 !!
Make sure to install this kernel on top of that rom stock kernel...
And make sure to clear the kernel adiutor setting too... You can set the others later, I did a dirty trick to let the CPU minimum frequency goes to 200 with interactive governor. I don't know if others got this weird problem, in my device set min freq to 200 didn't work with interactive governor.
How to install:
- Make sure you have lineage-14.1-20170126-nightly-wt88047 rom with the stock kernel
- Flash from TWRP like usual
Download:
https://drive.google.com/file/d/0B3ue12JCB2NgbVo3ODkxeVN1Ylk/view?usp=drivesdk
Credits:
@nicknitewolf for the awesome lineage official build
@iamsubhranil for the amazing stable kernel
@Ashish94 for the various genius tweaks
My modifications details:
1. In anykernel.sh file
Code:
# begin ramdisk changes
# add zetsubou initialization script
insert_line init.rc "import /init.zetsubou.rc" after "import /init.environ.rc" "import /init.zetsubou.rc";
# adb secure
backup_file default.prop;
replace_string default.prop "ro.adb.secure=0" "ro.adb.secure=1" "ro.adb.secure=0";
replace_string default.prop "ro.secure=0" "ro.secure=1" "ro.secure=0";
# change CPU
backup_file init.qcom.power.rc;
replace_string init.qcom.power.rc "scaling_min_freq 200000" "scaling_min_freq 800000" "scaling_min_freq 200000";
replace_string init.qcom.power.rc "1 200000:85" "1 800000:85" "1 200000:85";
# end ramdisk changes
2. Add file init.zetsubou.rc :
Code:
on boot
#S2W
write /sys/android_touch/sweep2wake 0
#DT2W
write /sys/android_touch/doubletap2wake 1
#S2S
write /sys/android_touch/sweep2sleep 0
on property:sys.boot_completed=1
#a53 max
chown system system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
chmod 0664 /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
write /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 1401600
#GPU
write /sys/class/kgsl/kgsl-3d0/devfreq/min_freq 100000000
write /sys/class/kgsl/kgsl-3d0/max_gpuclk 550000000
write /sys/module/adreno_idler/parameters/adreno_idler_active N
# Enable MSM Hotplug
write /sys/module/msm_hotplug/msm_enabled 1
Will try it over RR and let u know if it is working or not.
Thanx
Wow, another indonesian devs. try it asap :highfive: