Huawei MediaPad X1 fastboot issue - Huawei MediaPad, T-Mobile SpringBoard

Hi all!
I have 7D-501LV100R002C170B007.
The command fastboot devices shows me a strange result. So it is impossible to unlock bootloader. And no idea what to do...
The same commands with Huawei Honor 6 show me correct result.
Pls help

Related

[Q] Help needed Huawei y300-0100 bricked and Boot loop.

Hello, im in terrible situation, my huawei y300-0100 is stucked in bootloader, i can access the recovery but it doesnt flash any firmware that i tried . including 175 and 189 general firmware. i knew the bootloader is locked so i requested the unlock code from huawei but in fastboot oem unlock code restarts the mobile and it gets stucked in tho the bootloader again.
the emmc is readonly and hence cant update. please tell me what to do.
is there a way to flash the firmware by adb, ? the adb , fastboot and sideload all are working but it doesnt write any changes to the emmc.
if the post is in wrong category please forgive me, although i have been a regular user , this is my first post.
Thank you , any help is appreciated.

Mediapad 10 Link+ (S10-231u) PRODUCT ID

Hello everyone!
My Huawei Mediapad 10 Link+ (S10-231u) has stuck on the boot logo, and I can only access fastboot mode (no recovery, not even dload installation). However, the bootloader is locked, preventing me from flashing new images and fixing the tablet.
I have, of course, the Serial Nr. and the IMEI, but Huawei's Unlock Page doesn't let me proceed without the Product ID, which I can't find, since I can't boot into System. Is there any way to find the Product ID, or to get the bootloader unlock code without it?
Thanking you in advance for any help!
uriaman1 said:
Hello everyone!
My Huawei Mediapad 10 Link+ (S10-231u) has stuck on the boot logo, and I can only access fastboot mode (no recovery, not even dload installation). However, the bootloader is locked, preventing me from flashing new images and fixing the tablet.
I have, of course, the Serial Nr. and the IMEI, but Huawei's Unlock Page doesn't let me proceed without the Product ID, which I can't find, since I can't boot into System. Is there any way to find the Product ID, or to get the bootloader unlock code without it?
Thanking you in advance for any help!
Click to expand...
Click to collapse
same problem here i can only enter on fastboot mode
Did you find any solution
traumakom said:
same problem here i can only enter on fastboot mode
Click to expand...
Click to collapse
Hi: I'm still stuck in the same problem, but with S10-231L device. Were you able to find any solution for this?
Much appreciated.

Please help me about huawei y6 pro

Hello experts i am facing a real problem with my huawei y6 pro.
i want to Root my phone for this propose i setup adb on my PC,i connect my device in fastboot mode open cmd in adb,then i write the command as below,
fastboot oem unlock .....code here..
After pressing enter a confirmation was on the mobile screen about unblocking bootloader i Confirmed it then in cmd it shows that unlock successful.when i boot the phone my whole data was erased, so i was hopeful that now Root apps will work on my phone i tried kingroot app but it was still showing "Root strategy unavailable"
After it i planned to install custom recovery( i had a recovery for mtk devices)via fastboot mode ,i copy the recovery.img file to my adb folder rebooted my phone to fastboot and tried this command
"fastboot flash recovery recovery.img"
It shows succeeded,
But when i tried to boot into recovery it was stock recovery,
Please experts help me what can i do now??
Sent from my HUAWEI TIT-AL00 using XDA Forums
prior the flash try
fastboot erase recovery
then flash it
yasitoo said:
prior the flash try
fastboot erase recovery
then flash it
Click to expand...
Click to collapse
Thanks for reply i tried it ,
It shows ,
"Erasing ,recovery,...
Failed <remote: unknown command>
Finished. Total time:0.009s"
Sent from my HUAWEI TIT-AL00 using XDA Forums
Tajamal said:
Thanks for reply i tried it ,
It shows ,
"Erasing ,recovery,...
Failed <remote: unknown command>
Finished. Total time:0.009s"
Sent from my HUAWEI TIT-AL00 using XDA Forums
Click to expand...
Click to collapse
i'm not pro but you may have bad drivers or device is not completely unlocked,
try to completely uninstall any adb/device driver on your pc and install those ones,
besides that, check if device is detected with this command
Code:
fastboot -l devices
then try again with
Code:
fastboot erase recovery
fastboot flash recovery recovery.img
goodluck.
yasitoo said:
i'm not pro but you may have bad drivers or device is not completely unlocked,
try to completely uninstall any adb/device driver on your pc and install those ones,
besides that, check if device is detected with this command
Code:
fastboot -l devices
then try again with
Code:
fastboot erase recovery
fastboot flash recovery recovery.img
goodluck.
Click to expand...
Click to collapse
I guess my phone's bootloader is not unlocked actually i was unable to find unlock code because huawei website was showing an error i ask about this problem in open forum a person ask me to provide him imei+product ID i give it to him then he give me unlock code and i think problem is caused by wrong code the command is just erasing my memory but bootloader is still locked,
So can you help me to find unlock code?
Here is my mobile information
Serial Number
#AVY9KA9631123629
IMEI#******************
Product ID #11680402
Sent from my HUAWEI TIT-AL00 using XDA Forums
Tajamal said:
I guess my phone's bootloader is not unlocked actually i was unable to find unlock code because huawei website was showing an error i ask about this problem in open forum a person ask me to provide him imei+product ID i give it to him then he give me unlock code and i think problem is caused by wrong code the command is just erasing my memory but bootloader is still locked,
So can you help me to find unlock code?
Here is my mobile information
Serial Number
#AVY9KA9631123629
IMEI#***********
Product ID #11680402
Sent from my HUAWEI TIT-AL00 using XDA Forums
Click to expand...
Click to collapse
don't give your imei like that for anyone asking for it, besides that, ican't help you with the unlock code, you would better contact huawei to get the code or resolve the error,
PS : i suggest you to remove your imei from post.
yasitoo said:
don't give your imei like that for anyone asking for it, besides that, ican't help you with the unlock code, you would better contact huawei to get the code or resolve the error,
PS : i suggest you to remove your imei from post.
Click to expand...
Click to collapse
Bundle of thanks brother i will try again from huawei website,
Actually i am from Pakistan & here is a lot of websites are blocked that why i was asking to you,if you could try it for me from your internet it will resolve my issue,
Sent from my HUAWEI TIT-AL00 using XDA Forums
Bootloader unlock failed in my huawei y6 pro TIT-AL00 plzzz help me
00saravana said:
Bootloader unlock failed in my huawei y6 pro TIT-AL00 plzzz help me
Click to expand...
Click to collapse
How did you try to unlock your phones bootloader?
There is no need of unlocking code just command " fastboot oem unlock" and that's it now check your boot loader status with command on fastboot and it Will show you unlocked,
But there is no benefits to unlock this phone you will never find a Root solution for this phone,so it is recommended from me that stay with locked phone,& if you found any suitable custom ROM just flash it with PC without backup,other then that so far i didn't found any safe solution.
Sent from my HUAWEI TIT-AL00 using XDA Forums

Huawei Y6 SCL-U31 stuck in Bootloop, tried all method but didn't work. Help needed.

My Huawei Y6 SCL U31 got stuck in bootloop. I tried to put it in recovery mode, didn't work. Tried to flash new ROM in it but the phone is OEM locked. After messing on internet for 2 days I got to know that my bootloader should be unlocked in order flash new ROM on it. I tried multiple unlocking tools but they ask for Huawei Unlock 16 Digit code and apparently Huawei has taken down the page a while ago. All I can do is to put it on fastboot mode which says FRP lock Device Lock. Please anyone tell me how to unlock the bootloader or a fix which can make my phone work again. thanks.
HELP
ahsanraza said:
My Huawei Y6 SCL U31 got stuck in bootloop. I tried to put it in recovery mode, didn't work. Tried to flash new ROM in it but the phone is OEM locked. After messing on internet for 2 days I got to know that my bootloader should be unlocked in order flash new ROM on it. I tried multiple unlocking tools but they ask for Huawei Unlock 16 Digit code and apparently Huawei has taken down the page a while ago. All I can do is to put it on fastboot mode which says FRP lock Device Lock. Please anyone tell me how to unlock the bootloader or a fix which can make my phone work again. thanks.
Click to expand...
Click to collapse
I have tried almost all the available stock roms available on my Y6 but apparently non of them work. need help!
bump

Cant't unlock the bootloader.

Hello,
so i have a Huawei Y5 II CUN L21
i was searching all day about unlocking the bootloader, but the page of huawei is no longer available and i cant get my unlock code.
I tried everything i found to unlock it but nothing worked. I downloaded tons of programs and also tried through ADB commands like
adb devices
adb reboot fastboot
fastboot oem unlock/fastboot flashing unlock
but none worked
i just have no idea on how to do it. I also was searching all around XDA but did not found solution that works for me.
All i want to do is to install that is 6.0 or above.
I hope you got solution to my problem, thanks in advance! :/

Categories

Resources