Almost there.. need help - Verizon LG G3

I have just received my g3 rolled it back to 10b rooted and bumped..using the method in the noon guide so now I'm on twrp 2.8.0.0 how can I get the most recent twrp having bump?

ANTLAY said:
I have just received my g3 rolled it back to 10b rooted and bumped..using the method in the noon guide so now I'm on twrp 2.8.0.0 how can I get the most recent twrp having bump?
Click to expand...
Click to collapse
I've tested this so I know it works fine: Download TWRP Manager from the Play Store and install the latest TWRP from there. Or look for the TWRP thread in Development or Original Development, I forget which, and flash the new version from the old version.

Related

Full unroot with SuperSU but cannot install L

I have rooted with towelroot and installed supersu.
After a while I did a full unroot with supersu and uninstalled both. Then an official security update came and it installed just fine but now I get a 0x1111004 error (this device is suspected in rooting) when I try to install L.
I am a complete noob, so could you please point me in the right direction?
Thanks,
you need to flash 4.4 kdz then ota or straight to 5.0.2 kdz
because lg root security detected that you had root
sebatox said:
you need to flash 4.4 kdz then ota or straight to 5.0.2 kdz
because lg root security detected that you had root
Click to expand...
Click to collapse
And I need to flash my exact version, right? Is this guide still good? http://forum.xda-developers.com/showpost.php?p=45293512&postcount=1
yeah
but use kdz for g2m not g2
https://twitter.com/lg_firmware?lang=pl - search for the one that suits you (ofc d620r model)
sebatox said:
yeah
but use kdz for g2m not g2
https://twitter.com/lg_firmware?lang=pl - search for the one that suits you (ofc d620r model)
Click to expand...
Click to collapse
Thanks a lot for replying. I just did it with no issues. Just one more question. In case I want to revert back to 4.4 do I simply flash the previous version or are there factors to consider?
poli8 said:
Thanks a lot for replying. I just did it with no issues. Just one more question. In case I want to revert back to 4.4 do I simply flash the previous version or are there factors to consider?
Click to expand...
Click to collapse
You can, but you have choose "CSE Flash" instead of "Normal Flash"

Upgrading

Tired of seeing the new update notification. Looking at upgrading my phone. Unfortunately, I don't install ROMs all the time, so I tend to forget the steps / applications needed to upgrade. I'm rooted, and bootloader is unlocked.
Can anyone help?
Take a screenshot of current t about phone under settings so we know which version you are running
http://forum.xda-developers.com/showthread.php?t=3487757
demkantor said:
Take a screenshot of current t about phone under settings so we know which version you are running
Click to expand...
Click to collapse
Hardware: LG-H901
Software: H90120e
Double0EK said:
http://forum.xda-developers.com/showthread.php?t=3487757
Click to expand...
Click to collapse
Thank you, I'll check it out.
Is the new update rootable?
dinggus said:
Hardware: LG-H901
Software: H90120e
Thank you, I'll check it out.
Is the new update rootable?
Click to expand...
Click to collapse
So there are now two newer versions out there, the latest only has an OTA no kdz, and if you flash it as is you will loose root
I suggest wait until there is a method to keep root and flash the latest, which I'm sure will be soon
demkantor said:
So there are now two newer versions out there, the latest only has an OTA no kdz, and if you flash it as is you will loose root
I suggest wait until there is a method to keep root and flash the latest, which I'm sure will be soon
Click to expand...
Click to collapse
Okay, thank you. I have the "j" version downloaded. The new one is "l" correct?
Last time I tried updating to the "j" version, LG Up wouldn't recognize my phone.
dinggus said:
Okay, thank you. I have the "j" version downloaded. The new one is "l" correct?
Last time I tried updating to the "j" version, LG Up wouldn't recognize my phone.
Click to expand...
Click to collapse
L is the latest, if you want to flash j right now feel free
There are two Roms by eliminater74 and one by andy_zahng
For any of these choice you do not need LGup, so long as you are previously rooted
Just flash firmware (part one) via TWRP
Then flash any of those three Roms via TWRP
Reboot,
You will have j rooted
But being i tend to recommend a full wipe i would say wait until the latest L is out in a flashable .zip, should be soon
demkantor said:
L is the latest, if you want to flash j right now feel free
There are two Roms by eliminater74 and one by andy_zahng
For any of these choice you do not need LGup, so long as you are previously rooted
Just flash firmware (part one) via TWRP
Then flash any of those three Roms via TWRP
Reboot,
You will have j rooted
But being i tend to recommend a full wipe i would say wait until the latest L is out in a flashable .zip, should be soon
Click to expand...
Click to collapse
Thank you. I'm rooted and using stock ROM right now. What ROM do you use?

Easy method to root and flash LineageOS 14.1 on LG G2

1. Get root and TWRP (LGOneClickRootRecovery) ---> https://www.dropbox.com/s/2shvozzbu29xjfu/LGG2-D802-OneClickRootRecoveryV1.1.zip?dl=0
2. Go to TWRP and update TWRP by flashing zip file ---> http://www.gregtwallace.com/lgg2-projects/twrp/?version=3.1.0-1
3. Go to TWRP and wipe everything except internal storage
4. Flash LineageOS 14.1 & Gapps ----> https://download.lineageos.org/d802 & http://opengapps.org/
5. Reboot system
Edit: i tested it only on my lg d802 so u have to look for files for your device
Edit: backup your data before
Thanks, I bought a used G2 today and these links were very useful to me.
Does my LG G2 have to be updated to lollipop? (It's jelly bean currently)
Bluellama said:
Does my LG G2 have to be updated to lollipop? (It's jelly bean currently)
Click to expand...
Click to collapse
if you in stock yes you must get OTA lp
but be sure you have stock recovery
dodora3d said:
if you in stock yes you must get OTA lp
but be sure you have stock recovery
Click to expand...
Click to collapse
stock recovery? my phone is rooted and i intend to update it trough lg pc suite programme on pc becasue the update doesnt show up in the update center on the phone
Bluellama said:
stock recovery? my phone is rooted and i intend to update it trough lg pc suite programme on pc becasue the update doesnt show up in the update center on the phone
Click to expand...
Click to collapse
stock recovery mean doesn't flash Twrp or CWM anyway you can download KDZ (rom LP ) and flash it by LG up or LG flash tool
Thanks, this is really great and i'll use soon... The only thing i think that isn't there its and advice from backup of EFS partition at least the first time (for noobs)
Please do not use this if you have an ATT variant... This guy doesn't mention this is for T-Mobile only.
Thanks mate, it worked perfectly. +1000000
checo3x said:
Thanks mate, it worked perfectly. +1000000
Click to expand...
Click to collapse
no problem
Hello, i am Hakim from France. I just got a used LG G2 but when i checked the version saw that it is a LG G2 D806 with 32 Go Rom. Is there a lineageos for it or it will be ok if i flash the one for the LG G2 (D802) ? Thanks. Cheers
Easy, but...
Hakkeem said:
Hello, i am Hakim from France. I just got a used LG G2 but when i checked the version saw that it is a LG G2 D806 with 32 Go Rom. Is there a lineageos for it or it will be ok if i flash the one for the LG G2 (D802) ? Thanks. Cheers
Click to expand...
Click to collapse
Hello ! You have to flash D802 version and D806 modem because if you dont do that you will have loss of total signal when its 4G and you have to reboot (my experience)... And LineageOS have random reboots with F2FS... Thats all i think :laugh:
Well, for some unknown reason OneClickRecovery didn't do it's job properly and when I rebooted to go into recovery it actually did a factory reset and I lost all my valuable data. Worked second time but I'm so fcked now.
Can you tell me how to instal those file? Im on stock LP and noob
alvinprimo said:
Can you tell me how to instal those file? Im on stock LP and noob
Click to expand...
Click to collapse
do you still need help?
Does your bootloader status matter when doing this or is it somehow solved by the tool? Also, can you flash Resurrection Remix (Nougat) using the same method?
Hi !
I'm from france, and I've just received an old LG G2 D802 on Android 5.0.2.
The previous owner of the phone told me that it was rooted, but the application "root checker" says the contrary.
In order to be sure, do I need to do a reset, or can I just simply start this procedure ?
Also, does the TWRP update is mandatory, because the last version of TWRP recovery on their website is 2.8.7.0, it is not sufficient ?
Thanks !
helpful videos
this videos on yt should help you:
root and twrp: https://www.youtube.com/watch?v=BoPjGM0nrak
install lineage os 14.1 : https://www.youtube.com/watch?v=P7KVlKgmq5g
Flyred said:
Hi !
I'm from france, and I've just received an old LG G2 D802 on Android 5.0.2.
The previous owner of the phone told me that it was rooted, but the application "root checker" says the contrary.
In order to be sure, do I need to do a reset, or can I just simply start this procedure ?
Also, does the TWRP update is mandatory, because the last version of TWRP recovery on their website is 2.8.7.0, it is not sufficient ?
Thanks !
Click to expand...
Click to collapse
salut
i tried with twrp 2.8 but i didnt work so i installed twrp 3 and then it worked
mr_mintyfresh said:
Does your bootloader status matter when doing this or is it somehow solved by the tool? Also, can you flash Resurrection Remix (Nougat) using the same method?
Click to expand...
Click to collapse
as i have flashed LOS i didnt care about bootloader but it worked. RR should also work but i didnt try it

US Stock Recovery

Hello! Anyone running the US variant of the Mate 10 PRO could provide me with a link to the original stock recovery? Trying to update to the latest OTA but I need the original stock to do so unless someone know how to update while using TWRP? Thank you in advance!
Bump, looking for stock recoveries for the US variant as well. I'm currently running TWRP and rooted with Magisk, but I'm afraid that I won't be able to install OTAs with TWRP.
I've got a us variant and haven't done anything with it. How do you extract the stock recovery? Using ADB? I've never rooted or unlocked a Huawei but have other devices so I have an idea how it works. If you tell me how, I'll try and upload it for you.
I don't know either lol. I've tried using 'Huawei Update Extractor' to extract the recovery from firmwares of other regions but it keeps on giving me error in reading the file.
xxlap1xx said:
I don't know either lol. I've tried using 'Huawei Update Extractor' to extract the recovery from firmwares of other regions but it keeps on giving me error in reading the file.
Click to expand...
Click to collapse
I actually managed to get a stock recovery that worked. I was on the February security patch and the OTA for March came out and obviously TWRP didn't flash it. In that same TWRP thread there's a stock recovery_ramdisk (page 6) for a different region device that flashed and worked perfectly for my device. I took the OTA then reflashed TWRP and Flashed Magisk. Looks like that's the process I have to do every time there's an OTA
reV17 said:
I actually managed to get a stock recovery that worked. I was on the February security patch and the OTA for March came out and obviously TWRP didn't flash it. In that same TWRP thread there's a stock recovery_ramdisk (page 6) for a different region device that flashed and worked perfectly for my device. I took the OTA then reflashed TWRP and Flashed Magisk. Looks like that's the process I have to do every time there's an OTA
Click to expand...
Click to collapse
Sweet! Just to confirm, your device is the US variant right?
xxlap1xx said:
Sweet! Just to confirm, your device is the US variant right?
Click to expand...
Click to collapse
Yep, US Variant

H901 FW on VS990 Board. How can I update to MM or Nugget ?

Hello All
I would really appreciate the help on my situation.
I have bought a new motherboard from aliexpress. and it turns out the board is a VS990 with H901 5.1 installed on it.
Its working like a charm now I received the OTA update to android 6 but I am very scared to go ahead with the update as it will most probably brick the phone. Has anyone experienced same situation? Do i go ahead and let it do the OTA update? If not is there anyway I can install Nugget on my (Half / Half) setup ?
I will very much appreciate the help please.
Thanks
ramyboy said:
Hello All
I would really appreciate the help on my situation.
I have bought a new motherboard from aliexpress. and it turns out the board is a VS990 with H901 5.1 installed on it.
Its working like a charm now I received the OTA update to android 6 but I am very scared to go ahead with the update as it will most probably brick the phone. Has anyone experienced same situation? Do i go ahead and let it do the OTA update? If not is there anyway I can install Nugget on my (Half / Half) setup ?
I will very much appreciate the help please
Thanks
Click to expand...
Click to collapse
hi
before you install the update, check weather is rooted or not, if rooted update will stop, otherwise it will update the phone, i'm having att phone i updated manually, update was messed up my phone, now phone its 6.0 but errors on my phone, if you are not sure what you doing, please don't updated.
jurneybegin said:
hi
before you install the update, check weather is rooted or not, if rooted update will stop, otherwise it will update the phone, i'm having att phone i updated manually, update was messed up my phone, now phone its 6.0 but errors on my phone, if you are not sure what you doing, please don't updated.
Click to expand...
Click to collapse
Thank you but my issue is not work root. My phone it's not rooted. My board is a VS900 verizon board but the FW is t mobile. That is why i am worried to accept the OTA.
ramyboy said:
Hello All
I would really appreciate the help on my situation.
I have bought a new motherboard from aliexpress. and it turns out the board is a VS990 with H901 5.1 installed on it.
Its working like a charm now I received the OTA update to android 6 but I am very scared to go ahead with the update as it will most probably brick the phone. Has anyone experienced same situation? Do i go ahead and let it do the OTA update? If not is there anyway I can install Nugget on my (Half / Half) setup ?
I will very much appreciate the help please.
Thanks
Click to expand...
Click to collapse
These posts should help you, I also thought I was in your boat until I searched my whole motherboard.
https://forum.xda-developers.com/tm...k-h901-f600l-board-2017-t3635697/post75788253
https://forum.xda-developers.com/tm...k-h901-f600l-board-2017-t3635697/post75799801
My motherboard also had vs990 printed on it but the "t" link is soldered. So my v10 is a h901, which makes sense since I bought mine from my local T-Mobile store right after release.
If you plan on rooting do not take the ota. It is much easier to root on 5.1 (10c), the fastboot commands are still intact. All updates after 5.1 get more difficult to root. Once rooted there is twrp flashable .zip in the development forum to safely bring you to the latest 7.0 update (30c) and is also a full firmware update.
Sent from my Moto Z (2) using XDA Labs
skywalker-live said:
These posts should help you, I also thought I was in your boat until I searched my whole motherboard.
https://forum.xda-developers.com/tm...k-h901-f600l-board-2017-t3635697/post75788253
https://forum.xda-developers.com/tm...k-h901-f600l-board-2017-t3635697/post75799801
My motherboard also had vs990 printed on it but the "t" link is soldered. So my v10 is a h901, which makes sense since I bought mine from my local T-Mobile store right after release.
If you plan on rooting do not take the ota. It is much easier to root on 5.1 (10c), the fastboot commands are still intact. All updates after 5.1 get more difficult to root. Once rooted there is twrp flashable .zip in the development forum to safely bring you to the latest 7.0 update (30c) and is also a full firmware update.
Sent from my Moto Z (2) using XDA Labs
Click to expand...
Click to collapse
Man you are a life saver.. I have just unlocked my bootloader. Now where is that forum with the TWRP Nugget Please???
ramyboy said:
Man you are a life saver.. I have just unlocked my bootloader. Now where is that forum with the TWRP Nugget Please???
Click to expand...
Click to collapse
Did you take apart your phone and verify your soldered link?
Do you have twrp 3.2.1 installed?
All the info you need can be found https://forum.xda-developers.com/tmobile-lg-v10/development
Reading about anything you plan to do will help prevent a brick.
To install twrp
'fasboot flash recovery <twrp.img>' (extract .img from .zip) https://androidfilehost.com/?fid=818070582850501883
Linked from https://forum.xda-developers.com/tmobile-lg-v10/development/twrp-3-2-1-h901-t3765971
'reboot recovery'
From twrp flash this .zip (firmware)
https://drive.google.com/file/d/0Bz7RQirmMu9MZHNSc3hjRTF3X0U
Linked from
https://forum.xda-developers.com/tmobile-lg-v10/development/h901-t-mobile-nougat-v30b-twrp-t3639203
Then flash this .zip (30c update)
https://androidfilehost.com/?fid=673956719939821713
Linked from
https://forum.xda-developers.com/tm.../h901-t-mobile-nougat-v30c-flashable-t3744648
Then flash magisk 16.0 (current stable version) for root. Done.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Read all threads I linked, some parts of them are old and have been superseded but will still provide valuable info that should prevent a brick.
Sent from my Moto Z (2) using XDA Labs
skywalker-live said:
Did you take apart your phone and verify your soldered link?
Do you have twrp 3.2.1 installed?
All the info you need can be found https://forum.xda-developers.com/tmobile-lg-v10/development
Reading about anything you plan to do will help prevent a brick.
To install twrp
'fasboot flash recovery <twrp.img>' (extract .img from .zip) https://androidfilehost.com/?fid=818070582850501883
Linked from https://forum.xda-developers.com/tmobile-lg-v10/development/twrp-3-2-1-h901-t3765971
'reboot recovery'
From twrp flash this .zip (firmware)
https://drive.google.com/file/d/0Bz7RQirmMu9MZHNSc3hjRTF3X0U
Linked from
https://forum.xda-developers.com/tmobile-lg-v10/development/h901-t-mobile-nougat-v30b-twrp-t3639203
Then flash this .zip (30c update)
https://androidfilehost.com/?fid=673956719939821713
Linked from
https://forum.xda-developers.com/tm.../h901-t-mobile-nougat-v30c-flashable-t3744648
Then flash magisk 16.0 (current stable version) for root. Done.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Read all threads I linked, some parts of them are old and have been superseded but will still provide valuable info that should prevent a brick.
Sent from my Moto Z (2) using XDA Labs
Click to expand...
Click to collapse
That is great.. I will read them all very carefully and I will try to do it tommorrow.
2 points :
First I have already installed TWRP recovery for LG V10 H901 (File: twrp-2.8.7.1-h901.img & SuperSU v2.56 and now i am rooted.
Second I am sure now even without looking at the Link that my board is a H901 else I think the boot loader would have never been simply unlocked. Dont you agree?
ramyboy said:
That is great.. I will read them all very carefully and I will try to do it tommorrow.
2 points :
First I have already installed TWRP recovery for LG V10 H901 (File: twrp-2.8.7.1-h901.img & SuperSU v2.56 and now i am rooted.
Second I am sure now even without looking at the Link that my board is a H901 else I think the boot loader would have never been simply unlocked. Dont you agree?
Click to expand...
Click to collapse
SuperSU is abandoned. TWRP 2.8.7.1 can't flash nougat, you'll need to upgrade to the 3.2.1 I linked but will only have to flash the .zip from TWRP. SuperSU will get removed when you flash the system updates so then you should have no problem installing magisk, just do a factory reset in TWRP after you do the updates before magisk to remove and data from SuperSU that my be left.
Your 2nd point is dead on, the h901 is the only US carrier branded v10 that can be bootloader unlocked. True vs990's were locked down tight in true Verizon fashion.
Sent from my Moto Z (2) using XDA Labs
Looking the posts you shared i understand that i cant upgrade 5.1 directly to nugget.. Corrent me if i am wrong. If not then which 6.0 should i flash using rtwp? And can i upgrade instead of wiping over the rooted 5.1? I would love to keep my apps and setting.
ramyboy said:
Looking the posts you shared i understand that i cant upgrade 5.1 directly to nugget.. Corrent me if i am wrong. If not then which 6.0 should i flash using rtwp? And can i upgrade instead of wiping over the rooted 5.1? I would love to keep my apps and setting.
Click to expand...
Click to collapse
That's the point of these twrp flashable updates, to update without wipeing . For the Android 6.0 updates use the part 1 (firmware) and part 2 (system, boot) 20L files in this thread.
https://forum.xda-developers.com/tmobile-lg-v10/development/rom-v10h901v20estock-customized-t3360240
It is still heavily suggested to wipe when changing major Android versions. Minor updates within the same version don't cause too much trouble, but data structure varies between major version updates. All this being said some people don't have problems with dirty (no wipe) flashes.
Sent from my Moto Z (2) using XDA Labs
skywalker-live said:
That's the point of these twrp flashable updates, to update without wipeing . For the Android 6.0 updates use the part 1 (firmware) and part 2 (system, boot) 20L files in this thread.
https://forum.xda-developers.com/tmobile-lg-v10/development/rom-v10h901v20estock-customized-t3360240
It is still heavily suggested to wipe when changing major Android versions. Minor updates within the same version don't cause too much trouble, but data structure varies between major version updates. All this being said some people don't have problems with dirty (no wipe) flashes.
Sent from my Moto Z (2) using XDA Labs
Click to expand...
Click to collapse
I dont understand why this happened . I followed the exact steps .. Downloaded Part 1 L and Part 2 L
Flashed part 1 with TWRP and did not reboot. Then flashed Part 2.. Then rebooted.. Now my phone doesnt even turn on.
This must be a hard brick.. I cant even go into TWRP any more .. and no logo appears.. the phone is detected on PC as QSUSB_BULK
ramyboy said:
I dont understand why this happened . I followed the exact steps .. Downloaded Part 1 L and Part 2 L
Flashed part 1 with TWRP and did not reboot. Then flashed Part 2.. Then rebooted.. Now my phone doesnt even turn on.
This must be a hard brick.. I cant even go into TWRP any more .. and no logo appears.. the phone is detected on PC as QSUSB_BULK
Click to expand...
Click to collapse
There are a few threads that discuss recovering from bricked 20J software that you could try. (20L is said to be the only software that can downgrade, but only to 20J) Most people had LG do warranty exchange. This is the frustrating part of LG phones, how easy LG made it to brick if you didn't fully read up on what you were doing.
Sent from my Moto Z (2) using XDA Labs
hi. can anyone help me to fix my phone after update to MM 6.0, having errors LG vpn has stopped, finger print not working n and can't uninstall any program its reboot itself, I'm using ATT phone had 5.1 LP, motherboard is board is a VS990
im looking correct firmware to correct these errors on MM or upgrade to 7.0?
Please help me
skywalker-live said:
There are a few threads that discuss recovering from bricked 20J software that you could try. (20L is said to be the only software that can downgrade, but only to 20J) Most people had LG do warranty exchange. This is the frustrating part of LG phones, how easy LG made it to brick if you didn't fully read up on what you were doing.
Sent from my Moto Z (2) using XDA Labs
Click to expand...
Click to collapse
Hi Skywalker
I tried the image sd card method provided by tungkick and i could go to download mode. I uses 20j tot and flashed succesfully but phone keeps looping lg logo and verdication fail message in red.. you think this the wrong firmware? Whats the next step?
ramyboy said:
Hi Skywalker
I tried the image sd card method provided by tungkick and i could go to download mode. I uses 20j tot and flashed succesfully but phone keeps looping lg logo and verdication fail message in red.. you think this the wrong firmware? Whats the next step?
Click to expand...
Click to collapse
The unbricking thread should have some input on that problem, just search for it.
Sent from my Moto Z (2) using XDA Labs

Categories

Resources