Hey all.
So just a few hours ago, I was running rooted stock, as per the guide in the development section. I then installed twrp, and attempted to flash a ROM, which resulted in my phone not booting.
Since then, I got into recovery, attempted a factory reset (which didn't work), and ended up using Odin to restore to stock.
So now I'm sitting on the stock image, unsure if I have root. Everything seems to work fine, but is slow. Also, I cannot enable wifi (the switch goes on for a split second, then back to off).
Is there a way I can uninstall twrp, and go back to complete and total stock?
If it's relevant, I get a constant "This device has detected an application attempting unpermitted actions..." error.
Thanks guys!!!
UPDATE: It still has root access.
UPDATE 2: I'm finding some similar issues people were having with the T-Mobile version (http://androidforums.com/t-mobile-g...connect-wifi-prevention-information-help.html) though I'm not sure whether I can follow those solutions. I will wait until someone can advise me on this.
It sounds like you didn't installed the complete stock image, that the stocked rooted image is installed. Have you done factory reset?
wolfgrrl said:
It sounds like you didn't installed the complete stock image, that the stocked rooted image is installed. Have you done factory reset?
Click to expand...
Click to collapse
I tried the factory reset option from within twrp recovery, which doesn't fix any of these issues I'm having with constant security alerts or Wifi.
Got it fixed by doing this:
http://forum.xda-developers.com/showthread.php?t=2301259
I have the ME7 version of the S4. I rooted my device shortly after I got it and have been waiting for a good weekend day to install SafeStrap and find a good ROM to go with it. Got safestrap installed fine, downloaded SynergyROM and the flashover fix from the guide to installing a ROM via safe strap. Flashed them both, re-booted, and things didn't look too different. They were different and everything worked just fine, but it didn't seem right, so I re-booted into SafeStrap. I then realized I had flashed over the stock.
I then flashed the ROM into a new slot and booted there, it booted like a nice clean install (as it should). I would like to have a nice, clean stock ROM to go back to, but I know this has messed up the stock slot. I searched and couldn't find a good answer about how to fix a situation like this except for someone who wiped the stock slot and installed a custom rom there.
My question is this, if I download the stock image from here: http://forum.xda-developers.com/showthread.php?t=2301259 , and then flash it over the stock slot, will this restore the stock ME7 image? It seems like it might ought to work, but before I went and bricked my phone I thought I would ask here.
Requesting help. I am not a noob by any means, I have installed custom roms many times, and rooted many phones, and installed and used safestrap on several phones, but I cannot get ANY custom rom to install properly on my Verizon Samsung Galaxy S4, which is (was) rooted, with Safestrap 3.72, and MK2 firmware.
I was running the stock 4.3/mk2 firmware, with the latest busybox and supersu, and the latest safestrap, and safe root installed. I was able to successfully root the phone, and install safestrap, but even when I created a rom slot, gave it a name, wiped it completely, and then try to install one of the many 4.3/mk2 "Safe" roms, no rom will boot, once installed. It is so frustrating! I read somewhere that with the Verizon S4, and MK2 firmware, you could only install a rom in the stock rom slot, so I tried that, and now safestrap is gone, and the phone boots to a light blue screen with little green checkmarks. So I'm in the process of downloading the original MK2 firmware from Samsung and using Odin to restore. Anybody have any ideas? I'm thinking of quickly getting rid of the S4 while it still has some value.
mactechnm said:
Requesting help. I am not a noob by any means, I have installed custom roms many times, and rooted many phones, and installed and used safestrap on several phones, but I cannot get ANY custom rom to install properly on my Verizon Samsung Galaxy S4, which is (was) rooted, with Safestrap 3.72, and MK2 firmware.
I was running the stock 4.3/mk2 firmware, with the latest busybox and supersu, and the latest safestrap, and safe root installed. I was able to successfully root the phone, and install safestrap, but even when I created a rom slot, gave it a name, wiped it completely, and then try to install one of the many 4.3/mk2 "Safe" roms, no rom will boot, once installed. It is so frustrating! I read somewhere that with the Verizon S4, and MK2 firmware, you could only install a rom in the stock rom slot, so I tried that, and now safestrap is gone, and the phone boots to a light blue screen with little green checkmarks. So I'm in the process of downloading the original MK2 firmware from Samsung and using Odin to restore. Anybody have any ideas? I'm thinking of quickly getting rid of the S4 while it still has some value.
Click to expand...
Click to collapse
3.72 is for 4.4 KitKat and was made for the AT&T version of the S4, therefore, you are not able to create slots. You would need to install 3.71 and only flash 4.3 based roms. If you want 4.4 based roms you need to upgrade to NC5 and install 3.72, but you are only able to flash to the stock side.
There's plenty of info for you to read in the General section.
riker147 said:
3.72 is for 4.4 KitKat and was made for the AT&T version of the S4, therefore, you are not able to create slots. You would need to install 3.71 and only flash 4.3 based roms. If you want 4.4 based roms you need to upgrade to NC5 and install 3.72, but you are only able to flash to the stock side.
There's plenty of info for you to read in the General section.
Click to expand...
Click to collapse
Thank you for your response. Actually what I failed to mention is I did have 3.71 installed first, and I had the exact same problem. So it's not an issue with the safestrap version. And I have tried about 12 different ROMs. Including BajaROM-S4-Release-v-2.2 and BoneStock4.3_S4v2.1. As I said, I'm not a newbie at all, and I'm not about to hunt and peck for information again (which is what I've been doing for two days now). I wouldn't have asked for help if I had been successful in my search.
I have never had an issue installing any safestrap compatible rom...3.72 is strictly for android 4.4 and no rom slots...so no way you would ever get a rom installed using 3.72 on MK2 base build. As for 3.71...never heard of any issue with SS compatible roms for 3.71 not installing right. Really difficult to figure out what you are doing wrong from what you are giving us...
sent by safestrap powered echo v26
decaturbob said:
I have never had an issue installing any safestrap compatible rom...3.72 is strictly for android 4.4 and no rom slots...so no way you would ever get a rom installed using 3.72 on MK2 base build. As for 3.71...never heard of any issue with SS compatible roms for 3.71 not installing right. Really difficult to figure out what you are doing wrong from what you are giving us...
sent by safestrap powered echo v26
Click to expand...
Click to collapse
Again, thanks for your help. I'm going to start with Odin. Wipe it all clean and start over. That's always the best option. Thanks!
basically, I'd follow this:
http://forum.xda-developers.com/showthread.php?t=2763834
I'd go back to MK2, root, BB, SS 3.71. Then go up to NC5 ROMs with SS 3.72. Wiping EVERYTHING along the way, system included, not just factory reset
Similar Issue
I not a noob either im very familiar with how this whole operation works.
I have a very similar issue as well I'm (unable to flash roms including my own recovery). I'm 100% knowledgeable on CM, but when it comes to Safestrap or TWRP base Recoveries I'm far from noon but not an expert so to say... Here's my issue. I have the NC5 firmware and once had the Hyperdrive RLS17.1 KK S4 Final.zip... I went back to the I545VRUFNC5-Stock-Root-Deodex.zip.... I recently attempted to download another ROM, (based on the same firmware of course) as soon as I attempted to flash it (which only took about 1 min and didn't work) I figured something was wrong. So I just decided to go back to my recovery that I've made a few moments ago. When I tried to do that. The msg " E: Unable to mount '/system' " appeared.
Now I've notice since then Wiping and Flashing return the same results.
There is no longer an OS on my S4... I can not Mount the System.
So I believe in stuck in Safestrap 3.72.
(Please let me know what other info you need, I spent the last couple of days trying to figure this out on my own, so far I'm losing the battle)
Please help guys.
same problem
mactechnm said:
Requesting help. I am not a noob by any means, I have installed custom roms many times, and rooted many phones, and installed and used safestrap on several phones, but I cannot get ANY custom rom to install properly on my Verizon Samsung Galaxy S4, which is (was) rooted, with Safestrap 3.72, and MK2 firmware.
I was running the stock 4.3/mk2 firmware, with the latest busybox and supersu, and the latest safestrap, and safe root installed. I was able to successfully root the phone, and install safestrap, but even when I created a rom slot, gave it a name, wiped it completely, and then try to install one of the many 4.3/mk2 "Safe" roms, no rom will boot, once installed. It is so frustrating! I read somewhere that with the Verizon S4, and MK2 firmware, you could only install a rom in the stock rom slot, so I tried that, and now safestrap is gone, and the phone boots to a light blue screen with little green checkmarks. So I'm in the process of downloading the original MK2 firmware from Samsung and using Odin to restore. Anybody have any ideas? I'm thinking of quickly getting rid of the S4 while it still has some value.
Click to expand...
Click to collapse
im having the same problem i am also frustrated i don't know what to do
Similar Issue
I know there must be a way... If only I can get it to mount the "system" and "systemorig"...
I'm going to play around with the Slots and the datas Size's and see what I come up with.
Pretty sure you will need to Odin the stock NC5 image and start over.
Sent from my SCH-I545 using Tapatalk
jmgib said:
Pretty sure you will need to Odin the stock NC5 image and start over.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Oh ok. The Stock NC5 image... Great.
Where can I find the stock image?
If possible, could you please send a link?
Thanks in advance
damien302 said:
I not a noob either im very familiar with how this whole operation works.
I have a very similar issue as well I'm (unable to flash roms including my own recovery). I'm 100% knowledgeable on CM, but when it comes to Safestrap or TWRP base Recoveries I'm far from noon but not an expert so to say... Here's my issue. I have the NC5 firmware and once had the Hyperdrive RLS17.1 KK S4 Final.zip... I went back to the I545VRUFNC5-Stock-Root-Deodex.zip.... I recently attempted to download another ROM, (based on the same firmware of course) as soon as I attempted to flash it (which only took about 1 min and didn't work) I figured something was wrong. So I just decided to go back to my recovery that I've made a few moments ago. When I tried to do that. The msg " E: Unable to mount '/system' " appeared.
Now I've notice since then Wiping and Flashing return the same results.
There is no longer an OS on my S4... I can not Mount the System.
So I believe in stuck in Safestrap 3.72.
(Please let me know what other info you need, I spent the last couple of days trying to figure this out on my own, so far I'm losing the battle)
Please help guys.
Click to expand...
Click to collapse
shonnick01 said:
im having the same problem i am also frustrated i don't know what to do
Click to expand...
Click to collapse
I only just saw these posts, I have not been on here for a week or so but if you are still having issues... As far as what went wrong to begin with, did you factory reset/advanvanced wipe all but the internal sd before flashing? Are you only installing into the 'stock' slot on SafeStrap? As far as the fix, if you are suck in Safestrap, you will need to boot into recovery mode, if possible and wipe/factory reset and then boot into download mode and flash one of these http://forum.xda-developers.com/showthread.php?t=2735172 in Odin.
liljoe727 said:
I only just saw these posts, I have not been on here for a week or so but if you are still having issues... As far as what went wrong to begin with, did you factory reset/advanvanced wipe all but the internal sd before flashing? Are you only installing into the 'stock' slot on SafeStrap? As far as the fix, if you are suck in Safestrap, you will need to boot into recovery mode, if possible and wipe/factory reset and then boot into download mode and flash one of these http://forum.xda-developers.com/showthread.php?t=2735172 in Odin.
Click to expand...
Click to collapse
Thanks a lot man. The is has been resolved...
I had to Odin the stock NC5 (exactly what you've just mentioned in your response.) I had to flash it twice actually. The first time only took about 3 mins. I then tried to restore my backup, but during the time it restari SS (when the flash was approximately 90% done) I then went to restart the system and then received the notice "No OS loaded). So I wiped all except my SD card and then I just thought to myself to just try and Odin the stock NC5 one more time (it was getting late and I was about to give up). On the 2nd attempi it took almost 3 times the length as before (15-20mins) when it finished, it bypass the " unlock Samsung screen " and displayed the stock splash screen and audio then the Verizon screen. ( I was happier the a crackhead at a free crack-give-away)...
So I want to thank you for responding, I was determined not to give up,, and it was really close before I was about throw in the towel... Thanks a bunch. (You're response was exactly what I did last night)... I was about to update my issue as soon as I fixed it las night was it was so late and I was really sleepy, then I wake up to your message with the exact fix.
Thanks a lot ☺☺
I've had my brand new SCH-I545 since thanks giving now. I've been trying to root and get a custom ROM on the phone ever since then and have gotten closer and closer but haven't been able to quite get everything to co-operate.
I may catch scorn for posting such a generic question on a flagship phone but I've been up all night for 2 weeks now trying to get this to work following numerous tutorials but with android everything seems to get outdated when there are so many software variables at hand that are constantly changing like firmwares and build numbers. I've included all the info since it all seems to be vital and have tried to seperate tasks by paragraph so you can skip over what you feel may be arbritrary. So if I could get an up to date breakdown on how I could succeed in my endevour I'd appreciate it greatly.
Out the box I have a 4.4.2 and NK1 build number. I was finally able to get root access through towel root after flashing back to NC5. However even after flashing NC5 through odin, about phone still says my baseband and build number end I545VRUFNK1 but towelroot no longer gives me the "phone not supported" message and I'm able to succesfully atain root access, confirmed by root checker. Is that normal?
So I have root now but want a custom ROM. VZW locks the bootloaders on new phones so I believe that means I can't use a custom recovery like CWM. I've tried and tried but it doesn't work, neither does the CWM Rom manager app. I've managed to get a custom recovery through installing BusyBox and Safestrap. (I had to go through several apk's to get Safestrap to work. Usually I would be able to enter TWRP recovery through it but the recovery won't respond to any of my touches. The power button still works to turn the screen on and off so it is not frozen but it won't respond when I swipe to unlock it. Even now that I have it working, if the screen locks I'm unable to unlock it even if TWRP is performing a task in the backround and clearly not frozen.
One time I was able to more or less successfully flash LiquidSmooth (LS-KK-v3.2-2014-10-04-jflte.zip). This was the closest I ever got to my goal as the ROM succesfully booted up and I was able to browse the home screen and change all the settings and it was a moment of joy until I went to settings and switched wifi on it just wouldn't. It either just wouldn't switch or would switch right back and grey itself out I don't remember exactly. My phone had no service either for calls, text or 4G. So everything worked internally it just couldnt comunicate with any signals coming from outside the phone. Why would this be? If I manage to boot LiquidSmooth again is there something I could download to make the wifi/service work? (I could download through USB or Odin.)
After this I tried to flash CM but the phone wouldnt even start after installation and would just bootloop so I had to flash back to stock to make it work again. Then I tried LiquidSmooth several more times but now I get stuck at the bootscreen for LiquidSmooth where it has the logo and the backround flashing. I've let the animation loop for several minutes multiple times before doing a battery pull.
Basically for 2 weeks I've been flashing NC5->rooting->flashing NK1 back->installing safestrap->installing a rom->soft bricking->flashing back to stock ROM and starting again
Is it possible if I keep doing this proccess that it will just work one time? It may sound silly but I kind of believe just because I've had varrying degrees of success following the exact same procedure.
And when I install a ROM in TWRP I go Wipe->(swipe factory reset)->Install->(select LS.zip and wait for it to say its succesfully installed)->Swipe one more time to wipe cache->Reboot after this the phone either fails to start up or loops the LiquidSmooth animation. As I said, one time it started succesfully.
Let me know what any of this information leads you to believe and if you may have a sollution in mind. Huge thanks to anyone that read this and will try to help me. I've had this phone 2 weeks now and would like to start actually using it.
unorthodocks said:
I've had my brand new SCH-I545 since thanks giving now. I've been trying to root and get a custom ROM on the phone ever since then and have gotten closer and closer but haven't been able to quite get everything to co-operate.
I may catch scorn for posting such a generic question on a flagship phone but I've been up all night for 2 weeks now trying to get this to work following numerous tutorials but with android everything seems to get outdated when there are so many software variables at hand that are constantly changing like firmwares and build numbers. I've included all the info since it all seems to be vital and have tried to seperate tasks by paragraph so you can skip over what you feel may be arbritrary. So if I could get an up to date breakdown on how I could succeed in my endevour I'd appreciate it greatly.
Out the box I have a 4.4.2 and NK1 build number. I was finally able to get root access through towel root after flashing back to NC5. However even after flashing NC5 through odin, about phone still says my baseband and build number end I545VRUFNK1 but towelroot no longer gives me the "phone not supported" message and I'm able to succesfully atain root access, confirmed by root checker. Is that normal?
So I have root now but want a custom ROM. VZW locks the bootloaders on new phones so I believe that means I can't use a custom recovery like CWM. I've tried and tried but it doesn't work, neither does the CWM Rom manager app. I've managed to get a custom recovery through installing BusyBox and Safestrap. (I had to go through several apk's to get Safestrap to work. Usually I would be able to enter TWRP recovery through it but the recovery won't respond to any of my touches. The power button still works to turn the screen on and off so it is not frozen but it won't respond when I swipe to unlock it. Even now that I have it working, if the screen locks I'm unable to unlock it even if TWRP is performing a task in the backround and clearly not frozen.
One time I was able to more or less successfully flash LiquidSmooth (LS-KK-v3.2-2014-10-04-jflte.zip). This was the closest I ever got to my goal as the ROM succesfully booted up and I was able to browse the home screen and change all the settings and it was a moment of joy until I went to settings and switched wifi on it just wouldn't. It either just wouldn't switch or would switch right back and grey itself out I don't remember exactly. My phone had no service either for calls, text or 4G. So everything worked internally it just couldnt comunicate with any signals coming from outside the phone. Why would this be? If I manage to boot LiquidSmooth again is there something I could download to make the wifi/service work? (I could download through USB or Odin.)
After this I tried to flash CM but the phone wouldnt even start after installation and would just bootloop so I had to flash back to stock to make it work again. Then I tried LiquidSmooth several more times but now I get stuck at the bootscreen for LiquidSmooth where it has the logo and the backround flashing. I've let the animation loop for several minutes multiple times before doing a battery pull.
Basically for 2 weeks I've been flashing NC5->rooting->flashing NK1 back->installing safestrap->installing a rom->soft bricking->flashing back to stock ROM and starting again
Is it possible if I keep doing this proccess that it will just work one time? It may sound silly but I kind of believe just because I've had varrying degrees of success following the exact same procedure.
And when I install a ROM in TWRP I go Wipe->(swipe factory reset)->Install->(select LS.zip and wait for it to say its succesfully installed)->Swipe one more time to wipe cache->Reboot after this the phone either fails to start up or loops the LiquidSmooth animation. As I said, one time it started succesfully.
Let me know what any of this information leads you to believe and if you may have a sollution in mind. Huge thanks to anyone that read this and will try to help me. I've had this phone 2 weeks now and would like to start actually using it.
Click to expand...
Click to collapse
The issue is that safestrap is incompatible with the roms you are trying to use. It can be only used with Touchwiz based roms(i.e. using the stock kernel). Try flashing hyperdrive rom. Also, Im not familiar if NK1 can use towelroot and safestrap well. My recommendation would be to
1. clean wipe to nc5
2. towel root
3. install safestrap
4. flash ONLY roms that say they were safestrap compatible.
5. Flash any patches, modems, etc.
Weeks? How about spending a few hours reading up on what you can and can't do with your phone.
Raymondlikesroot said:
The issue is that safestrap is incompatible with the roms you are trying to use. It can be only used with Touchwiz based roms(i.e. using the stock kernel). Try flashing hyperdrive rom.
Click to expand...
Click to collapse
Ok, thanks, I was going to try to flash hyperdrive but the ROM I found was 1.2GB and I didn't have that much space on my SD. I'll borrow an empty one and try it again. Is it not odd that LS did a full boot if it's not compatible with safestrap? And are there any other Touchwiz roms? I don't like Touchwiz and am trying to get as far from it as I can but if I could just delete the bloatware (which I can still only disable after towel root), get SD access and get rid of the battery restrictions.
unorthodocks said:
Ok, thanks, I was going to try to flash hyperdrive but the ROM I found was 1.2GB and I didn't have that much space on my SD. I'll borrow an empty one and try it again. Is it not odd that LS did a full boot if it's not compatible with safestrap? And are there any other Touchwiz roms? I don't like Touchwiz and am trying to get as far from it as I can but if I could just delete the bloatware (which I can still only disable after towel root), get SD access and get rid of the battery restrictions.
Click to expand...
Click to collapse
The reason that LS did a full boot is because certain aosp roms can function with a touchwiz kernel. However, the result is always buggy. There is s4 verizon general thread talking about this.
There are many other tw roms. Just go to andriod devlopment! On the top of my head, I can think of eclipse, hyperdrive, echoe, and empty galaxy.
Started with a rooted Galaxy S4 on MK2.
Upgraded to NC5 with no issue using SafeStrap 3.72.
Booted into SafeStrap recovery, wiped everything except External Memory.
Loaded Hyperdrive into the Stock ROM slot and chose all my options.
Here's the problem. I got fat fingers and accidentally rebooted without flashing the HyperdriveUI and the SuperSU files.
Now, it boots just fine, but I'm getting an error regarding com.android.keyguard every five seconds. And I know I have lost root.
Okay, so where do I go? Should I start over with MK2, or is there a way to reload the NC5 via Odin which is the only thing that my computer is recognizing since I cannot re-activate USB debugging on the phone? I'm not completely bricked, but I feel like I'm sitting right on the edge of it. I am able to boot into Download mode and Odin 3.09 recognizes the phone. How do I get this thing back to a place where I can re-root it, preferrably keep NC5, and get Hyperdrive loaded properly?
Edit: Okay, I was able to flash the stock (stock stock) MK2 build. Now I just need to root, load NC5, and try Hyperdrive again. I'm not out of the woods yet, but I'm getting closer.
Edit 2: Got it re-rooted, and updated to NC5. I suppose I can delete this thread as it doesn't provide any help to anyone.
my phone do restart and dont open