Q&A for ****[Galaxy Star Duos GT-S5282]**** ROOT [DEVELOPMENT THREAD]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for ****[Galaxy Star Duos GT-S5282]**** ROOT [DEVELOPMENT THREAD]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
StockRecovery even after CWM installed
hi,...im using GTS5282,nd i followed alota the guides here,but i cannot enter my CWM,the stock one always comes up,i rooted it with CydiaIMpactor,then used ROMManager to bootinto CustomRecovery but still it dsnt come up,StockRecovery with the error "E:Signature verifation failed
Installation cancelled "
could some one explain why?
EDIT:i have already tried with flashing the CWM.tar using odin,many times using diffrent ones from diffrent guides,none work
Delete "install-recovery.sh" file in system/etc & flash cwm 6.0.37 or
flash this http://forum.xda-developers.com/showthread.php?t=2752913
& flash cwm 6.0.37
Sent from my GT-S5282
rag555 said:
Delete "install-recovery.sh" file in system/etc & flash cwm 6.0.37 or
flash this http://forum.xda-developers.com/showthread.php?t=2752913
& flash cwm 6.0.37
Sent from my GT-S5282
Click to expand...
Click to collapse
cud u pls kindly give me a proper link to the CWM? please?
---------- Post added at 07:59 AM ---------- Previous post was at 07:39 AM ----------
Omg it workd thank you
Dnt type thax. Hit thanx button if I helpd u
Sent from my GT-S5282
No notification bar!!
Its been a rough day for me.
I was using my galaxy gts5282 just fine like everyone else!
Suddenly after rebooting my status bar gone.
Tried hard reset.
It came back and then gone again.
I tried different roms, kernels,flashed stock.Nothing solved my problem.Every time it comes back after hard reset and vanish again.
I asked so many people's .
Nothing worked.
I hope someone here can solve my problem
#Thanks in advance.
Related
[Q&A] [ROOT] & [RECOVERY][UPDATED] For Micromax-A069 Bolt + 100% Working Root Guide
Q&A for [ROOT] & [RECOVERY][UPDATED] For Micromax-A069 Bolt + 100% Working Root Guide
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROOT] & [RECOVERY][UPDATED] For Micromax-A069 Bolt + 100% Working Root Guide. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
im stuck at red exclamation
while roooting when i clicked run2.bat my a069 boot with andro bot with red exclamation and according to ur step i should get 'install zip' smthg what to do help
charmingprince said:
while roooting when i clicked run2.bat my a069 boot with andro bot with red exclamation and according to ur step i should get 'install zip' smthg what to do help
Click to expand...
Click to collapse
please write more clearly.. i'll be happy to help
how to root A069???????????
Help!
Hey Man.....Thanks For The Trick....It Worked Well For My MMX BOLT A069.....Can U Please Tell Me How To UnRoot It So That In Future I Can Claim Warranty If Something Goes Wrong....Please...
CWM recovery of micromax bolt a069
can u pls make a vid on how to do it
its a bit hard to do it like this
pls post a vid on this procedure
---------- Post added at 10:55 AM ---------- Previous post was at 10:51 AM ----------
[/COLOR]
Assplorer said:
Hey Man.....Thanks For The Trick....It Worked Well For My MMX BOLT A069.....Can U Please Tell Me How To UnRoot It So That In Future I Can Claim Warranty If Something Goes Wrong....Please...
Click to expand...
Click to collapse
howwwww did u do it iam stuck
everything happens as it shud but then when i boot into recovery , the recovery dosent show up
instead the phone simply reboots
pls help
---------- Post added at 11:08 AM ---------- Previous post was at 10:55 AM ----------
abhimortal6 said:
please write more clearly.. i'll be happy to help
Click to expand...
Click to collapse
can you please help??
what i did: downloaded all the files ,ran SP_flash_tool, loaded your scatter, selected RECOVERY started, "download" ,connected my phone[usb debugging: ENABLED]
started RUN.2.BAT my phone displayed android is upgrading ,followed ur root method the phone rebooted again and poof NOTHING the phone simply rebooted
i even tried going into recovery manually but no it will simply reboot
notes:
i already had root [before following ur method] but still i did ur method
pls help :crying:
spiderweb3086 said:
can u pls make a vid on how to do it
its a bit hard to do it like this
pls post a vid on this procedure
---------- Post added at 10:55 AM ---------- Previous post was at 10:51 AM ----------
[/COLOR]
howwwww did u do it iam stuck
everything happens as it shud but then when i boot into recovery , the recovery dosent show up
instead the phone simply reboots
pls help
---------- Post added at 11:08 AM ---------- Previous post was at 10:55 AM ----------
can you please help??
what i did: downloaded all the files ,ran SP_flash_tool, loaded your scatter, selected RECOVERY started, "download" ,connected my phone[usb debugging: ENABLED]
started RUN.2.BAT my phone displayed android is upgrading ,followed ur root method the phone rebooted again and poof NOTHING the phone simply rebooted
i even tried going into recovery manually but no it will simply reboot
notes:
i already had root [before following ur method] but still i did ur method
pls help :crying:
Click to expand...
Click to collapse
Did you installed drivers correctly!?
re:did u installed drivers correctly?
abhimortal6 said:
Did you installed drivers correctly!?
Click to expand...
Click to collapse
I tried to install drivers using InstallDriver.exe file in mtk usb driver folder it said: Failed to install usb driver for w
indows so i ran troubleshoot compatibility and it said: drivers installed succesfully for windows vista
BTW:i dont have windows vista i have windows 8.1 is that the problem?
spiderweb3086 said:
I tried to install drivers using InstallDriver.exe file in mtk usb driver folder it said: Failed to install usb driver for w
indows so i ran troubleshoot compatibility and it said: drivers installed succesfully for windows vista
BTW:i dont have windows vista i have windows 8.1 is that the problem?
Click to expand...
Click to collapse
yes it is !! .search for mtk flashing driver latest
Micromax A069 root
Hello there !
I have been trying to root my phone with the given above procedures but couldnt be able to do it.
when i try to install tools and driver it failed for mtk and adb it will just shown cmd
Please help
micromax bolt a069
its says installation aborted for rooting the device in rcovery mode.
i have istalled the "ubdate super su.zip" file in recovery mode.
Could I install the recovery using uncle mobile tool?
gavin_joseph5 said:
Could I install the recovery using uncle mobile tool?
Click to expand...
Click to collapse
No use flashr it will definately work
not going on imei repair with miracle box
[/FONT][/FONT]
QA Bot said:
Q&A for [ROOT] & [RECOVERY][UPDATED] For Micromax-A069 Bolt + 100% Working Root Guide
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROOT] & [RECOVERY][UPDATED] For Micromax-A069 Bolt + 100% Working Root Guide. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
I have a Problem:my micromax a069 is stucking on 29-30%
What should I do
Q&A for [Recovery][CWM Advanced Edition] MTK PhilZ recovery For Celkon A97i
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Recovery][CWM Advanced Edition] MTK PhilZ recovery For Celkon A97i. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
princemouli said:
Reserved 3
Click to expand...
Click to collapse
I can't flash it with SP flash...how to flash ???I need a help.. after clicking download, it said me to choose scatter file..
lafayet said:
I can't flash it with SP flash...how to flash ???I need a help.. after clicking download, it said me to choose scatter file..
Click to expand...
Click to collapse
use stock rom's scatter file ...
any way i attached it in attachments download it ...
also check the MTK PhilZ recovery For Celkon A97i Thread
i provided sp flash tool drivers
princemouli said:
use stock rom's scatter file ...
any way i attached it in attachments download it ...
also check the MTK PhilZ recovery For Celkon A97i Thread
i provided sp flash tool drivers
Click to expand...
Click to collapse
Thank u for ur quick answer...this problem was solved...I read the whole of thread and I respect it step by step...but in finish, when flashing it appears this error :
S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
I repeat flashing about 30 times but the prblem persist...any idea ???????
lafayet said:
Thank u for ur quick answer...this problem was solved...I read the whole of thread and I respect it step by step...but in finish, when flashing it appears this error :
S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
I repeat flashing about 30 times but the prblem persist...any idea ???????
Click to expand...
Click to collapse
::::---- Be Sure That u have installed mtk preloader drivers ...
:::::---- Be sure that the recovery file name is "recovery.img" Very important
:::::---- only recovery.img and scatter file should be present in a single folder
princemouli said:
::::---- Be Sure That u have installed mtk preloader drivers ...
:::::---- Be sure that the recovery file name is "recovery.img" Very important
:::::---- only recovery.img and scatter file should be present in a single folder[/FONT][/SIZE]
Click to expand...
Click to collapse
Unfortunately, the problem persists..
this problem is known in internet..but I don't found solution..
plz, if u have any idea tell me plz..and thanks a lot king
The problem was solved..I used the scatter_PMT file obtained after doing a backup with MtkDroidTools v2.5.3.
(attached file)
lafayet said:
The problem was solved..I used the scatter_PMT file obtained after doing a backup with MtkDroidTools v2.5.3.
(attached file)
Click to expand...
Click to collapse
brother use the scatter file which i provided in the website...
---------- Post added at 10:18 PM ---------- Previous post was at 09:44 PM ----------
lafayet said:
The problem was solved..I used the scatter_PMT file obtained after doing a backup with MtkDroidTools v2.5.3.
(attached file)
Click to expand...
Click to collapse
i updated the procedure in the main thread follow it... good luck
note ::--
download the sp flash tool i provided in the main page..
read each and every line of the procedure thrice (3 times )...
Q&A for Lolipop 5.0 | Rooting | Recoveries | Micromax Unite 2 [Stock Rom]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Lolipop 5.0 | Rooting | Recoveries | Micromax Unite 2 [Stock Rom]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Dpi changer links not working bro
Thanks and Kudos, it works perfect on my device.
Right now I have Philz recovery installed, But I am used to TWRP, how can I change to that??
And is there any way to change stock icons to Original Lollipop??
---------- Post added at 07:35 AM ---------- Previous post was at 07:14 AM ----------
On clicking Reboot in Power options just shut downs phone, and I need to manually switch it on again. Please help me fix it...
DPI changer!
Sorry bro but the links for the dpi changer is not working. Please fix!
Not only Dpi changer, Real Lollipop Bootlogo, Bootanimation & Bootsound link also not working. Please update link bro.
And that flashing "SD card write enabler" didn't work too.
Apps are still installed in internal memory!
pragmatiste said:
Dpi changer links not working bro
Click to expand...
Click to collapse
Anurag_K said:
Sorry bro but the links for the dpi changer is not working. Please fix!
Click to expand...
Click to collapse
Harikrish44 said:
Not only Dpi changer, Real Lollipop Bootlogo, Bootanimation & Bootsound link also not working. Please update link bro.
Click to expand...
Click to collapse
Anurag_K said:
And that flashing "SD card write enabler" didn't work too.
Apps are still installed in internal memory!
Click to expand...
Click to collapse
I will take a look.
Sent from my Micromax A106 using XDA Premium 4 mobile app
---------- Post added at 05:13 PM ---------- Previous post was at 05:12 PM ----------
Harikrish44 said:
Thanks and Kudos, it works perfect on my device.
Right now I have Philz recovery installed, But I am used to TWRP, how can I change to that??
And is there any way to change stock icons to Original Lollipop??
---------- Post added at 07:35 AM ---------- Previous post was at 07:14 AM ----------
On clicking Reboot in Power options just shut downs phone, and I need to manually switch it on again. Please help me fix it...
Click to expand...
Click to collapse
I will try to find a way to change the icons. And the "reboot" option doesn't works. Its a bug. Forgot to mention.
Sent from my Micromax A106 using XDA Premium 4 mobile app
Ya apps will install in internal but when we download anything from browser it download's in external sd card.
help me if you can. thanks in advance
Hi there.
I am a newbie here. So I am sorry for posting like this. Can somebody please tell me how to root my new phone 'Micromax Canvas Fire 4'. Exact details and rooting file links will be good. My Emil address is now '[email protected]'
Thanks in advance.
Sorry For being Noob, But why do we need to unlock boot loader?? What does it serve?
And One more thing, to flash Lollipop Boot (Logo + Animation + Sound) , we just need to flash it through custom recovery after rooting or any other way???
Please help, And Please find a way to remove that reboot bug also. Thank you again
My sim can use internet but cant recieve call or sms but my network coverage is full then also no sms no call cumin so i m not able to log in whatsapp hike etc due to verification code not cumin
More Bugs
1) Contacts crashes, and force stops.
2) At times, the recent apps loops, so while in an app and going back takes to last app and pressing back again brings the first app again and so on, like in a loop.
3) I already mentioned about Reboot.
Please find a solution bro.
plzzz help meee
when i update the auto-rotate not working any more
help plz :/ sorry for my bad englich
Need help....
Thanks . But need help ... when i connect my phone to pc it connected as MTP device and when m trying to delete some file from card with pc it showing error (the device has either stopped responding or has been disconnected.) Please give me solution.
is it possible without stockrom
Bro is it possible to flash this firmware update with any other eom EU ning 5.0 ??
I can't recognize my unite 2 in sp flash tool
I Did what instructed in video but sp flash tools doesn't detect my device , can u fix this
Damodhar Bandla said:
I Did what instructed in video but sp flash tools doesn't detect my device , can u fix this
Click to expand...
Click to collapse
There's one way. Google the way to install preloader driver for mtk devices. Hope this will solve your problem. It worked in my case. :thumbup:
If using a custom rom (Dark L v1.6 by Umang Leekha), with repartitioned memory, is it possible to flash Lollipop directly using SP flash tools?
If not, then what to do?
androidghoul said:
If using a custom rom (Dark L v1.6 by Umang Leekha), with repartitioned memory, is it possible to flash Lollipop directly using SP flash tools?
If not, then what to do?
Click to expand...
Click to collapse
Yes it is possible. Just flash and enjoy!
Q&A for [rom][port]popkat v2 rom[smooth]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [rom][port]popkat v2 rom[smooth]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
how to flash rom ?
Plzz...tell me how to flash this ROM ...mean what to flash first ...and which is the download link ..mirror download or 0.zip ....plzz tell me
abhinav raikwar said:
Plzz...tell me how to flash this ROM ...mean what to flash first ...and which is the download link ..mirror download or 0.zip ....plzz tell me
Click to expand...
Click to collapse
Download now from mirror link...
Extract the zip file... There u will see 2 zip files and instructions.. Open the instructions file..and follow the instructions in it......make sure u have the backup...
Where is a.zip link?? The mirror link have a password. What password it is??
kecik18 said:
Where is a.zip link?? The mirror link have a password. What password it is??
Click to expand...
Click to collapse
It has no password... And link is uploaded to "mega" site
Darshan601 said:
It has no password... And link is uploaded to "mega" site
Click to expand...
Click to collapse
When i go to mega site i get notification that file is encryption . " please write the encryption key"
Hi,
I haven't actually flashed the rom, but I had known of the popkat roms for some time (for other phones). Let me point you a couple of things
a) It's not your typical updater-script that's on your rom, did you write from scratch? Because there're some weird instructions there
b)Init.d looks a little bit messy, lots of entries with the same number and the rom has no busybox
I'd look into that if I were you. Just my two cents. Please take my opinion as a constructive critique
Thanks for sharing
77chedu said:
Hi,
I haven't actually flashed the rom, but I had known of the popkat roms for some time (for other phones). Let me point you a couple of things
a) It's not your typical updater-script that's on your rom, did you write from scratch? Because there're some weird instructions there
b)Init.d looks a little bit messy, lots of entries with the same number and the rom has no busybox
I'd look into that if I were you. Just my two cents. Please take my opinion as a constructive critique
Thanks for sharing
Click to expand...
Click to collapse
I have not written the updater script... The updater script is same from the device from which I have ported...just edited the updater script
I didn't make any Modifications in the ROM..
And yes there is no busybox installed
Thanks for your opinion...
And I m just beginner in Porting roms
oh..Great..Bro
Now a days..Eating lots of lollipops..
Q&A for Hive ui For Lava X8
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Hive ui For Lava X8. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
i found two bugs
i found two bugs
1. play store isnt working
2. when connecting to a pc using usb, omega 5.0 is an empty folder
Make the ROM deodex and let's see if it vanish the bugs.
Sent from my irisX8 using XDA Free mobile app
shivamodi said:
i found two bugs
1. play store isnt working
2. when connecting to a pc using usb, omega 5.0 is an empty folder
Click to expand...
Click to collapse
Yes problems solved,,, i will upload my backup. Stay tunned and hit thx
Guys check out this MIUI 6 ROM for iris X8.
Its awesome and totally bugs free...
http://primoe2.blogspot.in/2015/07/miui-6-564-for-lava-iris-x8-mt6592.html?m=1
Sent from my irisX8 using XDA Free mobile app
play store
Working
---------- Post added at 06:15 AM ---------- Previous post was at 06:12 AM ----------
Unmount sdcard than ur internal storage will comr
Dude want play store patch or solution.... Deleting host file not working... But rom is quiet nice and impressive.... Love your work...hope you'll find some solution....