Related
I have a motorola motostart (xt390) and wish to unlock bootloader, root, etc. Nevertless, I just can't get into fastboot mode.
Powering up with VOL Down it access the recovery mode. The same for VOL UP+DOWN.
When i try powering up with VOL UP pressed the device simply don't power up.
Is it a malfunctioning device or some roms for this hardware simply have mysteriuos ways to enter fastboot?
The ROM is a brazilian retail, Gingerbread (2.3.6) version MAUI.11AMD.W11.37.SP.V9.F4.P1, build: ARGONM_W_07.15.04R_D.
Please! Help!
Nobody? hehehe
I have found a clue: if I plug the device without batery and hol VOL_UP the windows detect, and install the drivers, to a "MTK USB Port (COM X)". If I release the VOL_UP the USB port gets disconected.
Someone know what I can do with a MTK port?
erlyneto said:
I have found a clue: if I plug the device without batery and hol VOL_UP the windows detect, and install the drivers, to a "MTK USB Port (COM X)". If I release the VOL_UP the USB port gets disconected.
Someone know what I can do with a MTK port?
Click to expand...
Click to collapse
I think that's the same as download mode for when you have to flash it with SPFT. That's how I get spft to recognize my O+8.75.
xshinta9 said:
I think that's the same as download mode for when you have to flash it with SPFT. That's how I get spft to recognize my O+8.75.
Click to expand...
Click to collapse
Sorry by my ignorance, but SPFT is a software?
I find the SPFT that you mentioned. But, as far as I could understand the software, it is used to flash or dump rom from MTK based phones.
But there are problems:
1)XT390 appears to be based on MTK6*** phones, but is not the same, so, the roms should not work in it, right?
2)I can't use this tool to send commands to the device (like fastboot mode on other Motorola android phones), so i can't get my device id to unlock the bootloader in the morotola web site...
Do you know anything about that software, its roms and XT390? There are any ways to open a command line utility on it?
Hi bro, unfortunately I have zero knowledge on it thus far. 'am figuring out how to unlock my phone's bootloader as well, (it's a local-based chinese phone as well that's marketed under a different name)
Hi there,
yesterday I tried to root my new Tablet Z (16GB, LTE, Model: SGP321, Firmware: 10.4.B.0.569) and it doesn't start since then.
I used an ubuntu live CD for all these tasks because fastboot doesn't work on my win 8.1 and my debian wheezy didn't have the libc-dev needed in its repositories (didn't want to mess with packets that weren't yet integrated into my OS).
What I did:
unlock the bootloader according to http://unlockbootloader.sonymobile.com/instructions
I followed the instructions here: http://forum.xda-developers.com/xperia-z/general/how-to-root-10-4-b-0-569-t2590781
a few annotations to this:
the firmware rar didn't include a "Recover.zip", so I used the boot.img directly inside the firmware rar
although sony and this CM tutorial use the "-i" parameter of fastboot, I didn't use it because it wasn't used by the tutorial
after I did the "fastboot reboot" step, the device wasn't listed anymore when typing "fastboot devices", which, I think, is okay since the device should restart then.
I think it didn't really restart, because the LED on the side glew red.
I tried to turn on the tablet but it didn't do anything (the LED kept glowing red).
I tried holding vol up and power for a few seconds (until the LED blinked first once and then three times) but the tablet wouldn't do anything except for the LED glowing red. at somepoint, the LED would turn off (I think that happened when I hold vol up and power for more than 10 sec).
I was able to let it glow red again by pressing vol up and power again and release the vol up button before the power button.
I also tried to use the PC companion on my windows machine to repair the tablet but the tablet wasn't even recognized (either using the fastboot-procedure by holding vol up while connecting the tablet nor normal plugging in...)
any ideas what I could do next?
Same Problem!
Hey wullxz!
I have the same problem. Red LED most of the time, and I cannot make ANY USB connection to the PC. The tablet won't show up in the device manager. So obviously cant use flashtool, nor PC companion. Ive tried all this volume up and down button stuff, but simply cannot get it to show up on the computer.. Tried a different USB cable as well.. Same issue. The USB port is definitely not broken. Its brand new..
Have you found any solution ? Or anyone else? Mine just got back from Sony Repair.. they wont fix it cuz they detected that Ive tampered with the original software.... meaning Warranty Lost!
Great!
hi,
i also sent mine to sony for a repair. i wrote that i did a firmware update and the tablet wouldn't boot afterwards.
i didn't try the bootloader-unlock again afterwards.
Help Needed!
Tablet Z with unlocked bootloader and rooted 10.1.C.0.370
My issues occured after a downgrade to 4.1.2.
I CAN:
1) Start my tablet, everything normal...
2) Charge my tablet
3) Go into safe mode
4) Go into fastboot mode (solid BLUE LED)
5) Use the memory card and use root apps (maybe this could help restore?)
I CAN NOT:
1) Get my PC to recognize that a USB device is connected. Neither in Mass Storage mode, Media mode, nor fastboot mode.
- Tried with several cables and computers (this is not a driver issue, since it won't show up at all in device manager)
- Flashtool obvious;y says, no device connected
2) Get in to flashmode: device blinks red for about half a second, then green for half a second, and then LED is off. Nothing recognized via USB on PC
3) Get into recovery mode
4) Update over WIFI (fails because unlocled bootloader I suppose)
Any help would be greatly appreciated!
i think you should open a new thread for your problem because it seems like it's not really similar to my issue.
you should get more/better replies in an own thread.
Oki
wullxz said:
i think you should open a new thread for your problem because it seems like it's not really similar to my issue.
you should get more/better replies in an own thread.
Click to expand...
Click to collapse
Oki thnx, will try that!
centinel_x said:
Tablet Z with unlocked bootloader and rooted 10.1.C.0.370
My issues occured after a downgrade to 4.1.2.
I CAN:
1) Start my tablet, everything normal...
2) Charge my tablet
3) Go into safe mode
4) Go into fastboot mode (solid BLUE LED)
5) Use the memory card and use root apps (maybe this could help restore?)
I CAN NOT:
1) Get my PC to recognize that a USB device is connected. Neither in Mass Storage mode, Media mode, nor fastboot mode.
- Tried with several cables and computers (this is not a driver issue, since it won't show up at all in device manager)
- Flashtool obvious;y says, no device connected
2) Get in to flashmode: device blinks red for about half a second, then green for half a second, and then LED is off. Nothing recognized via USB on PC
3) Get into recovery mode
4) Update over WIFI (fails because unlocled bootloader I suppose)
Any help would be greatly appreciated!
Click to expand...
Click to collapse
let it charge to 100%, check for flashmode drivers installed and then try attaching it to pc only when flashtool asks you to do it.
Rootk1t said:
let it charge to 100%, check for flashmode drivers installed and then try attaching it to pc only when flashtool asks you to do it.
Click to expand...
Click to collapse
Hey thanks for your reply... It wont go into flashmode... Theres something fundamentally wrong.. I cant figure out what... I leave it plugged in for 48 hours..but it doesnt really get full.. the most Ill get the orange LED.. like 50%... now its on since about 12 hours.. no LED on at all... strange..
But yea.. no flashmode... Nothing showing up when connecting the USB cable... nothing in device manager..and therefore flashtool sees nothing!
SOLVED
Problem solved! I can't believe it. Two bad(?) USB cables. Bought a new one, charges fine, flashmode fine. Flashed stock ROM.
However the Camera still doesn't work. Maybe the problem of the cable inside which may have come loose!
I have an LG E435g. I tried to flash another version of stock firmware (V20a_00) using KDZ updater tool. It did flash, but my phone is f***d. The screen is totally black (no logo,etc.). My PC recognizes that it is connected, but I cannot load MTP driver for file transfers. It was in debug mode during flash, but isn't now because I can't use adb. Have tried everything in forums, nothing changes. I will pay ANYONE to fix as I am at wits end and know just enough to screw s**t up. Totally unable to get into download mode, emergency mode,etc. Phone is not rooted and the bootloader is locked.
No problem
brdbat416 said:
I have an LG E435g. I tried to flash another version of stock firmware (V20a_00) using KDZ updater tool. It did flash, but my phone is f***d. The screen is totally black (no logo,etc.). My PC recognizes that it is connected, but I cannot load MTP driver for file transfers. It was in debug mode during flash, but isn't now because I can't use adb. Have tried everything in forums, nothing changes. I will pay ANYONE to fix as I am at wits end and know just enough to screw s**t up. Totally unable to get into download mode, emergency mode,etc. Phone is not rooted and the bootloader is locked.
Click to expand...
Click to collapse
THIS GUIDE IS FOR UN-BRICKING ALL KNOWN TO ME LG Lx PHONES ON WINDOWS BASED COMPUTERS
(Virtual Machine Will Work )
THIS GUIDE ASSUMES YOU HAVE DRIVERS INSTALLED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE KDZ UPDATE PROGRAM
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE .kdz FIRMWARE DOWNLOADED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
1. Plug USB cable to PC
2. Take battery out of phone
3. Press and hold VOL- button or VOL+ or VOL+ and VOL-
4. Plug USB cable to phone
5. Wait few seconds ... (it should display "Download Mode" on black screen)
6. Put battery back in phone
7. UPDATE YOUR KDZ NOW
8. navigate to phone settings and security and preform wipe/master reset (not obligatory but ensures "clean rom" )
Enjoy your NEW OLD phone
Hi all, I will try to be as detailed as possible.
I have a MetroPCS LG MS323 which I bought as a second phone to use when I travel as my regular phone is CDMA and I wanted a GSM phone that I could use with a sim card. While on an overseas trip I paid a cellphone place to unlock the phone so I could use other carriers' sim card, it was working fine since then. However, as I don't use the phone on a regular basis it ended up sitting and the battery lost its charge. When I tried to charge it by usb, it started bootlooping (vibrate, LG logo, repeat). After that I pulled the battery and charged it using an external charger. The phone is not rooted. I tried the factory reset key combo, but it gets stuck on the screen which says factory reset processing........ endlessly. I tried to download kdz file and flash with LG flash tool but phone cannot get into download mode. When I press vol key and plug usb cable, it says LOADING.......... press volum up key until download mode starts But it gets stuck there and download mode never starts.
I downloaded adb and fastboot to a Windows 7 laptop, and LG drivers, but when I connect phone and open a terminal adb devices shows no phone connected.
I also downloaded Laf.img for this phone and Laf recovery tool for Windows but again I cannot seem to get computer to see the phone. If I try to use the tool it says "waiting for device"
One difficulty is to trying to plug phone to computer the right way.
Most of the threads say to have phone in battery charge mode with usb debugging enabled, but I can't select any settings if the phone is bricked.
If I just plug the phone to usb when it is turned off it shows a picture of battery but no sign of charging, and computer doesn't detect phone.
If I plug phone to usb first, then hold vol and power key the LG logo will go black and it vibrates, in that case sometimes the Windows laptop will see 2 folders, verinfo and image.
When I plug usb cable to Linux computer and phone is off, same thing just picture of battery but terminal only shows sda1 sda2 sda3 etc no sdb no sdc just like not detected.
If I hold vol down then plug usb it vibrates and stuck on LG logo.
I have also tried to plug usb, then press vol down and power until phone vibrates, then try to let go buttons before LG logo shows up. but it doesn't mount.
If I hold vol up and power, then plug usb. it vibrates and goes to LG logo.
Last night somehow I got it to mount on the linux computer but the file manager was going crazy opening multiple windows and a list of folders would show up for a second, disappear and reappear as if the system was trying to read the folders but having difficulty. Today I am not able to get it to mount.
I have downloaded a linux livecd with adb and fastboot, I haven't tried it yet because I am not sure the path to flash an img file from a different directory on the hard drive on the windows laptop.
I have downloaded aboot.img but don't know how I can flash it if I can't see the phone on any computers.
I have spent days searching for solutions but have not seen the exact same problem, other threads suggest things but often the symptoms are slightly different or with a different phone. So, first of all I need to know what kind of brick I have, because other solutions I have seen posted for completely black screen, or phone detected as qhsusb qualcomm etc. which seems like a different problem.
So the 2 main things are 1, to know which kind of brick because many of the solutions I see posted seem like a different problem.
second, what is the best way to plug to computer so I can see the phone?
I burned a live CD of FWUL and ran adb from linux, still says adb devices nothing shows up. usb cable is plugged in and phone is turned off. Am I doing this wrong? I held down power and vol down until phone vibrates and LG logo appears. adb devices - "list of devices attached" still has nothing showing.. I don't know why even in Linux I can't see any device attached. Also I tried with pressing vol up and power until phone vibrates.
ls /dev/sd* only shows sda sda1 sda2 etc
I have also looked at past threads about unlocking the L70 bootloader, but the bootloader.zip no longer links and the phone does not have busybox installed.
I tried to see it Windows Device Manager but it does not show up anywhere.
This probably won't help, but, when you're at this point, you'll try about anything.
Did you fully install the LG drivers on your PC? Obvious seeming question. I was doing an old Droid Bionic a couple months ago and didnt' switch the USB modes (charging, media, file transfer, whatever it had) to each mode before modding .
As a result, I bricked that Droid bad. It took me almost a week and a half to restore it. I'm not sure if LG drivers work the same way, though I've worked on plenty of them. I think I have an LG Leon still in the scrap heap as a result of trying to replace a cracked digitizer that was bonded to the LCD. If anyone needs parts for one, I've got em, cheap I think that's an MS345 if I recall.
equitube said:
This probably won't help, but, when you're at this point, you'll try about anything.
Did you fully install the LG drivers on your PC? Obvious seeming question. I was doing an old Droid Bionic a couple months ago and didnt' switch the USB modes (charging, media, file transfer, whatever it had) to each mode before modding .
As a result, I bricked that Droid bad. It took me almost a week and a half to restore it. I'm not sure if LG drivers work the same way, though I've worked on plenty of them. I think I have an LG Leon still in the scrap heap as a result of trying to replace a cracked digitizer that was bonded to the LCD. If anyone needs parts for one, I've got em, cheap I think that's an MS345 if I recall.
Click to expand...
Click to collapse
Thanks, yes I had installed latest LG drivers LGMobileDriver WHQL Ver 4.2.0 before trying to flash .kdz file.
A tiny bit of progress to report, after getting a perfect timing to release the power and vol down keys I was finally able to connect to Windows machine. while waiting for drivers to install it was detected as QHSUSB_BULK in device manager, after drivers loaded now it is listed as LGE AndroidNet USB Serial {port (COM4). However when I run adb I still cannot see an attached device. I will look at solutions for the specific type of brick problem which has now been identified.
fofopuka said:
Thanks, yes I had installed latest LG drivers LGMobileDriver WHQL Ver 4.2.0 before trying to flash .kdz file.
Click to expand...
Click to collapse
What I meant was after initially installing the drivers did you switch the USB mode on your LG to all possible settings? Some drivers (like Moto) install more functions only when first called. you'll know if you switch from say charging to MTP or RNDIS you'll see driver install reopen.
also when you first ran ADB and plugged in the phone you probably should have seen more drivers install.
Forgive me if I seem to insult your intelligence. I'm an IT pro w 30 yrs in tech and I didn't know about the multi driver USB functions.
Tom Sgt aka Rootjunky has a good video on this that i initially didn't watch figuring I'd been installing drivers forever. 5 more minutes of watching it would have saved near 40 hrs of work and research
and when r
equitube said:
What I meant was after initially installing the drivers did you switch the USB mode on your LG to all possible settings? Some drivers (like Moto) install more functions only when first called. you'll know if you switch from say charging to MTP or RNDIS you'll see driver install reopen.
also when you first ran ADB and plugged in the phone you probably should have seen more drivers install.
Forgive me if I seem to insult your intelligence. I'm an IT pro w 30 yrs in tech and I didn't know about the multi driver USB functions.
Tom Sgt aka Rootjunky has a good video on this that i initially didn't watch figuring I'd been installing drivers forever. 5 more minutes of watching it would have saved near 40 hrs of work and research
and when r
Click to expand...
Click to collapse
thanks, I found his video for the G2 and no, I have never seen that with the drivers before! good to know. You can't insult my intelligence because most of this is over my head and I'm just trying to follow stuff I found with Google on XDA......
I downloaded and installed the Qualcomm drivers to try and identify if I have the 9006 or 9008 variety brick. However now when I plug in the phone Windows waits to install drivers, then says successful, when I look in device manager now I can't find the phone. But I did notice on the taskbar now there appears an icon named "intel graphics media accelerator driver for mobile" perhaps that is the driver Windows assigned to it? Device manager does have Intel Graphics Media Accelerator under display adapters. The other weird thing is that now it shows the battery as charging, which it never did the other times I plugged it into usb.
fofopuka said:
thanks, I found his video for the G2 and no, I have never seen that with the drivers before! good to know. You can't insult my intelligence because most of this is over my head and I'm just trying to follow stuff I found with Google on XDA......
I downloaded and installed the Qualcomm drivers to try and identify if I have the 9006 or 9008 variety brick. However now when I plug in the phone Windows waits to install drivers, then says successful, when I look in device manager now I can't find the phone. But I did notice on the taskbar now there appears an icon named "intel graphics media accelerator driver for mobile" perhaps that is the driver Windows assigned to it? Device manager does have Intel Graphics Media Accelerator under display adapters. The other weird thing is that now it shows the battery as charging, which it never did the other times I plugged it into usb.
Click to expand...
Click to collapse
have you seen this thread.
https://forum.xda-developers.com/showthread.php?t=2773123
it has the firmware for your model links to drivers and the LG flash tool, (which is warned against newbies (what the hey, it can't get much worse, we were all newbies once, )
Can you boot into fastboot? if so, you could flash the firmware with that.
equitube said:
have you seen this thread.
https://forum.xda-developers.com/showthread.php?t=2773123
it has the firmware for your model links to drivers and the LG flash tool, (which is warned against newbies (what the hey, it can't get much worse, we were all newbies once, )
Can you boot into fastboot? if so, you could flash the firmware with that.
Click to expand...
Click to collapse
Hi, yes although those links no longer work I have found the drivers and flashtool elsewhere. If I try to run flashtool it cannot see the phone. I cannot get into fastboot, and download mode won't load. I cannot see the phone on any Linux machine. The most I can do it see the phone as E: Qualcomm MMC storage USB device in Device Manager, but no other details. Explorer can see 2 folders, image and verinfo. Is there anything I can do with these folders in Windows? adb and fastboot run from terminal still do not list any attached device. Windows did a search for drivers for QHSUSB_BULK, although in device manager it still says LGE AndroidNet USB Serial Port (COM5).
What I really want to do at this point is push aboot.img to the phone, but for some reason I can't access the phone with Linux or adb. maybe because it did not have usb debugging enabled before it bricked. So many of the threads I have seen require a working phone to implement the steps, is there any way to enable usb debugging when the phone doesn't work?
fofopuka said:
Hi, yes although those links no longer work I have found the drivers and flashtool elsewhere. If I try to run flashtool it cannot see the phone. I cannot get into fastboot, and download mode won't load. I cannot see the phone on any Linux machine. The most I can do it see the phone as E: Qualcomm MMC storage USB device in Device Manager, but no other details. Explorer can see 2 folders, image and verinfo. Is there anything I can do with these folders in Windows? adb and fastboot run from terminal still do not list any attached device. Windows did a search for drivers for QHSUSB_BULK, although in device manager it still says LGE AndroidNet USB Serial Port (COM5).
What I really want to do at this point is push aboot.img to the phone, but for some reason I can't access the phone with Linux or adb. maybe because it did not have usb debugging enabled before it bricked. So many of the threads I have seen require a working phone to implement the steps, is there any way to enable usb debugging when the phone doesn't work?
Click to expand...
Click to collapse
Of course, I had forgotten about that. In order to use fastboot, most flashing tools, you HAVE to have USB debugging on.
There are occasional ways around this, though they are few. I do seem to recall oding it on that LG Leon. OR it may have been a Moto e or G, let me look back at previous threads i've asked for help in.
(Hmm, perhaps taking notes, or just leaving a webcam running while I'm doing a new device might be valuable in the future, I think with remarkable hindsight.) :cyclops:
---------- Post added at 02:28 AM ---------- Previous post was at 02:26 AM ----------
And no, you can't do anything to Android files in Windows, except see them. they are generally a different file system
One of the difficulties is just plugging it to a PC. 9 out of 10 times it is not recognized and nothing happens. So far the only way that seems to occasionally work is to plug the usb cable to the Windows 7 laptop, hold vol down and power, release both as soon as it vibrates. Most of the time I can't get it timed exactly right, but if I'm lucky sometimes Windows will detect the usb connection by following these steps. If I try on a Linux machine nothing happens, phone stays invisible. The most I've gotten with Linux is to charge the battery, but will not mount.
It is just a stock phone, not rooted, no busybox, no developer options enabled.
hi. so my problem is that my phone does not turn on, i cant go to recovery or do hard reset. the phone react when i plug it in PC without battery, but its always connect and disconnect over and over again. i have downloaded the omap drivers and instaled it. now i have in the device manager a OMAP4430 FastBoot USB device. by the drivers was a fastboot emulator. but when i will flash rom, kernel or recovery a just get partition does not exist. can someone help me please? srry for english.
Does your phone not turn on at all when holding down the power button? If it boots up, and gets stuck on a loop or has an error message, that is different. But if it doesn't turn on at all, then your battery is dead or something is wrong with your phone's hardware. If you connect your phone to the PC (with the battery on), does it at least show a light? Or does it boot up at all when you hold the power button? If it doesn't show a light or boot up, it is not your battery, but your phone's hardware. Your phone might have been dropped or water inside it or it was microwaved? I know it sounds silly, but something happened to the phone physically. Now if you connect it to the PC and you see a light but it never boots, your device is bricked. Not accusing you, but you might have tried rooting it or writing over a partition on your phone which caused to brick. Also, try typing in fastboot devices. If it shows up a device, that means it is connected. Cheers!
No the phone does not turn on and it shows nothing, even when i put it on charger. If i connect to pc with battery after i installed the omap driver it just connect and disconnect over and over again, windows make this sound when you connect and disconnect something. I have flashed a new rom. It has worked but after some time its stoped. So i have try flashed it again but i could not get in recovery. A files was missing and after i try flashing thhe recovery its just dead. I can connect it just with the fastboot emulator because it's don't connect when i just put it on pc. I must connect it without battery wait 4 sec and then put the battery back. Than i can see in the emu my phone but not able flash anything because of partition does not exist