[Q] Doogee DG310 soft brick problem - Android Q&A, Help & Troubleshooting

This is my first post to a forum and I am inexperienced with android phone roms so please forgive any mistakes. I have a Doogee DG310 MTK6582 running on the stock rom and all worked very well even after it was rooted. I then tried to install CWM but the install failed and I was no longer able to boot into the stock recovery screen. I decided to start again so I flashed the doogee stock Rom with the SP flash tool downloaded from their website. The flash completed OK but the phone now boots, turns on the backlight and play the doogee boot tune but no screen image appears. I get the same blank screen with backlight when I boot into recovery, the phone will communicate with SP flash tool. I have spent a lot of time researching the problem and have formatted the flash apart from the bootloader but I am concerned about trying other procedures in case I totally brick the phone. Can anyone help please?

Related

[Q] Citycall A1 stuck in bootloop WITHOUT a recovery mode

i recently purchase a Chinese phone branded Citycall A1 and managed to successfully root it. upon trying to flash the recovery i flushed the wrong CMW and i was unable to revert back to the stock recovery. i downloaded Roomtools app and selected an option about making the memory card dual(i guess that meant usable on phone and computer simultaneously) now my phone is stuck on boot-loop and i can find how to fix this. Please help.

[Q] XOLO A500 hard bricked

I'd rooted my XOLO A500 device but i didnot flash CWM or CyanogenMod recovery after rooting. My phone got stuck in boot loop a.k.a soft-bricked. I flash stock ROM using Phenix flash tool but it hard bricked my phone in turn. Now my phone doesn't respond to anything-charger, data cable nothing. I re-flashed again & the flash tool on the PC shows "Backup QCN" but the phone doesn't reboots or recovers. My phone is not going to recovery mode either. What to do? Suggest me something.
:crying: :crying:

[Brick] Hard bricked my Huawei Y300...

Hi guys,
I've flashed a wrong kernel for my huawei Y300 and now he is bricked. I boot on a green screen with two rectangles blue and red. When I connect the phone to my computer, he's not detected. The only thing I can do is to put a microSD card and boot into download mode to install the stock firmware, but the installation stucks at 1/3.
I've seen many threads, but not found any fix. Please help !
PS: I was using the stock ROM

my tablet stuck at erasing screen while doing a hard reset.

My tablet lenovo a3000-h got stucked last day so I done a hard reset but... But the screen shows a Android logo and saying erasing it restarts automatically and showing the same screen again and again for 2 days. Is it any hardware problem or software? The tablet is rooted. Is it bricked? I can't figure it out. Guyz plz help me!!
May be its a bootloop. If u are having custom recovery such as twrp flash any custom ROM.otherwise use spflash tool to flash stock or custom rom. (Its software problem only).check in YouTube for tutorial on using spflash tool or getting custom recovery
Sent from my Pixel XL using Tapatalk
it's not working with spflash tool as it going continuously in loop mode.Is it possible flash stock rom in recovery mode(inbuilt one)

Ulefone Power 2 Bricked

Ok, so i wanted to root my phone. I installed twrp and unlocked bootloader. Twrp was not working properly and phone wouldn't boot so i took it off twrp by using stock rom for my phone. The way i did it was using fastboot and flashing the boot.img system.img, and recovery.img. Now when i turn on phone it goes straight to "No Commands" error. I tried all the key combinations but i cant get into recovery. I tried flashing it with sp flash, but everytime i plug in the phone it turns on, and before the tool can flash it , and because of that it fails. Can you guys please help me?

Categories

Resources