A while ago, I cross-compiled my own version of Bash 4.2.0 .
It worked fine on my Galaxy Nexus running first Jelly Bean and then KitKat 4.2.0.
It also works fine on my Nexus 7 running first KitKat 4.4.2 and now Lollipop 5.0.2
But when I run it on my S3 with 4.4.2, it immediately seg faults.
All ROMS are stock except for rooting with latest SuperSU.
Bash is saved in the same directory on all devices.
It's not a SELinux problem since it still seg faults with 'setenforce 0'
Any idea on why this might be happening?
This is not development so i reported to topic to get it moved!
Get the latest bash 4.3.33 for Android here:
http://forum.xda-developers.com/android/software-hacking/dev-lastest-bash-android-t2898295
Related
I've rooted my phone but I can't find any custom ROMs for it.
RMolloy24 said:
I've rooted my phone but I can't find any custom ROMs for it.
Click to expand...
Click to collapse
Any custom ROM for s5830i will work on your phone
CyanogenMod 11 ROM working on S5839i?
Hi!
I'm a bit unexperienced, and not sure about the differences among the S583xx models.
I have a S5839i which is still running Android Gingerbread 2.3, however quite badly (e.g. some calls do not show up).
So I'd like to update it to Android Kitkat 4.4.
For the S5380 I found the following manual:
http://www.ibtimes.co.uk/update-gala...nstall-1430916
However, I am not sure if the CyanogenMod 11 is compatible with my model.
On the release note http://forum.xda-developers.com/show....php?t=2587481 , it is stated:
So no idea, if this includes my model (is the S5839I as sub-model of S5830I?)
If so, is there any other way to update my phone to Android Kitkat 4.4? If not, is an update to Android 4.3, Jelly Bean possible?
Thx a lot!
Palatine said:
Hi!
I'm a bit unexperienced, and not sure about the differences among the S583xx models.
I have a S5839i which is still running Android Gingerbread 2.3, however quite badly (e.g. some calls do not show up).
So I'd like to update it to Android Kitkat 4.4.
For the S5380 I found the following manual:
http://www.ibtimes.co.uk/update-gala...nstall-1430916
However, I am not sure if the CyanogenMod 11 is compatible with my model.
On the release note http://forum.xda-developers.com/show....php?t=2587481 , it is stated:
So no idea, if this includes my model (is the S5839I as sub-model of S5830I?)
If so, is there any other way to update my phone to Android Kitkat 4.4? If not, is an update to Android 4.3, Jelly Bean possible?
Thx a lot!
Click to expand...
Click to collapse
No you dont have any Update you have stick to 2.3.6 or Go for any other device.
Sent from my GT-S5830i using Tapatalk 2
unfortunately no .
Palatine said:
Hi!
I'm a bit unexperienced, and not sure about the differences among the S583xx models.
I have a S5839i which is still running Android Gingerbread 2.3, however quite badly (e.g. some calls do not show up).
So I'd like to update it to Android Kitkat 4.4.
For the S5380 I found the following manual:
http://www.ibtimes.co.uk/update-gala...nstall-1430916
However, I am not sure if the CyanogenMod 11 is compatible with my model.
On the release note http://forum.xda-developers.com/show....php?t=2587481 , it is stated:
So no idea, if this includes my model (is the S5839I as sub-model of S5830I?)
If so, is there any other way to update my phone to Android Kitkat 4.4? If not, is an update to Android 4.3, Jelly Bean possible?
Thx a lot!
Click to expand...
Click to collapse
unfortunately there are no upgrades for this model , if your looking for better performance & more storage , get yourself a new device
Hi I noticed the N7100 note 2 ports of 4.4.2 Kitkat are getting more stable but do any of you remember why the i9300 couldn't get updated, Samsung said driver issues. But yet we can now run 4.4.2 touchwiz on i9300 with no issues. So my question is why can't the i9300 get updated officially?
Because its old phone which had a lot of updates. From 4.0.4 to 4.3
Can you imagine how much money cost update? And update do not earn any money.
A while ago, I cross-compiled my own version of Bash 4.2.0 .
It worked fine on my Galaxy Nexus running first Jelly Bean and then KitKat 4.2.0.
It also works fine on my Nexus 7 running first KitKat 4.4.2 and now Lollipop 5.0.2
But when I run it on my S3 with 4.4.2, it immediately seg faults.
All ROMS are stock except for rooting with latest SuperSU.
Bash is saved in the same directory on all devices.
It's not a SELinux problem since it still seg faults with 'setenforce 0'
Any idea on why this might be happening?
Does anyone here know if there is a i777 compatible kernel for the galaxy s2 i9100 5.1 lollipop roms . I have tried using Shift- Eternal- lollipop kernel. It was compatible with the i9100 5.0 lollipop CM Resurrection_remix ROM, but I have not been able to get it to work with the 5.1 release.. I have tried replacing the boot image file from cyanide L 5.1. It boots but there is no wifi or Mobile data.
Quicksilver13 said:
Does anyone here know if there is a i777 compatible kernel for the galaxy s2 i9100 5.1 lollipop roms . I have tried using Shift- Eternal- lollipop kernel. It was compatible with the i9100 5.0 lollipop CM Resurrection_remix ROM, but I have not been able to get it to work with the 5.1 release.. I have tried replacing the boot image file from cyanide L 5.1. It boots but there is no wifi or Mobile data.
Click to expand...
Click to collapse
No, sorry. @rogersb11's kernel is pretty much the only game in town now. It's possible (purely speculative) that you've run into problems because he builds his own kernel instead of CM's, and RR is basically CM with added features so you would need a pure CM kernel to port.
Again, that's a guess, as that's how it used to work. He's posted an update to his rom; did you try pulling the kernel from that update?
Steve, thanks for taking the time to reply. I was afraid that was the case. Rogerb11 first 5.1 release was without his lollipop kernel. he stated that he was having problems with his kernel with wifi. I tried porting that kernel and I believe that it just boot looped. His second release with his kernel booted, but then I experienced problems with wifi and mobile. Hopefully he will release a 5.1 standalone kernel that can be ported over to the i9100 ROMs.
The truth is I have not been able to find a stable lollipop rom yet for my phone. The closest was resolution remix 5.02. and I was wanting to try the 5.1 version. Will keep checking the forum. Thanks again
Hello,
Yes, I know this phone is old and I'm hoping someone will help me but I have a Motorola Droid Turbo 2 and the battery is about to go bad and I also broke me MicroUSB port so I have to wirelessly charge it. I want to go back to my Samsung Galaxy S4 which it's on Android 5.0.1.
Before I got this Samsung Galaxy S4 had the same phone but I broke the LCD when I went to replace the screen which it ran Android 4.4.4, it was rooted, and had the SafeStrap custom recovery on it. This Samsung Galaxy S4 is on Android 5.0.1 and I saw a custom ROM that can make the phone run on Android 7.1 or Oreo so I want to do that to get the phone almost up-to-date close to my Motorola Droid Turbo 2.
I rooted using Kingroot so the first question is how to make SuperSU the main root permission.
I tried to use TWRP but it mess the stock recovery up so now it goes to Odin mode, the second question is how can I get a custom recovery to unlock the bootloader.
Lastly, what is the best ROM, I see the CM is nothing anymore and I saw a ROM called "LineageOS 14.1" which run Android 7.1.1, so the ROM I like to see haves at least Android 6 or newer and if there isn't any then what is the best Android 5.0 ROM.
--Here is the Phone info---
Model number: SCH-I545
Android version: Android 5.0.1
Baseband version: I545VRSGPL1
Kernel version 3.40
Build number: LRX22C.I545VRSGPL1
Keep in mind I'm little rust on rooting and custom ROM. I haven't done a custom ROM since the Droid 1 days. Please make it noob friendly as possible. I'm using a Linux OS right now but if I need a Windows OS I got one.
Thank you!
TheLamerAndroid said:
Hello,
Yes, I know this phone is old and I'm hoping someone will help me but I have a Motorola Droid Turbo 2 and the battery is about to go bad and I also broke me MicroUSB port so I have to wirelessly charge it. I want to go back to my Samsung Galaxy S4 which it's on Android 5.0.1.
Before I got this Samsung Galaxy S4 had the same phone but I broke the LCD when I went to replace the screen which it ran Android 4.4.4, it was rooted, and had the SafeStrap custom recovery on it. This Samsung Galaxy S4 is on Android 5.0.1 and I saw a custom ROM that can make the phone run on Android 7.1 or Oreo so I want to do that to get the phone almost up-to-date close to my Motorola Droid Turbo 2.
I rooted using Kingroot so the first question is how to make SuperSU the main root permission.
I tried to use TWRP but it mess the stock recovery up so now it goes to Odin mode, the second question is how can I get a custom recovery to unlock the bootloader.
Lastly, what is the best ROM, I see the CM is nothing anymore and I saw a ROM called "LineageOS 14.1" which run Android 7.1.1, so the ROM I like to see haves at least Android 6 or newer and if there isn't any then what is the best Android 5.0 ROM.
--Here is the Phone info---
Model number: SCH-I545
Android version: Android 5.0.1
Baseband version: I545VRSGPL1
Kernel version 3.40
Build number: LRX22C.I545VRSGPL1
Keep in mind I'm little rust on rooting and custom ROM. I haven't done a custom ROM since the Droid 1 days. Please make it noob friendly as possible. I'm using a Linux OS right now but if I need a Windows OS I got one.
Thank you!
Click to expand...
Click to collapse
You're stuck on 5.0.1. forget about upgrading past 5.0.1. not going to happen. Ever.
Sent from my [device_name] using XDA-Developers Legacy app
Only the MDK bootloader can boot ROMS based on Android 6, 7, 8, etc. Once you've updated past MDK, you can't go back.