BEFORE FLASHING YOU NEED
* Your device should be running on KK 4.4.4 NK4 ( Recommended )
* However, you can flash from NC5 and NH7 ( Follow instructions listed below )
* A KK 4.4 + compatible custom recovery, like TWRP or PHILZ CWM
* I except no responsibility for Broken, Abused, or Neglected devices
* Big shout out to Carl1961 for all his help !!!!
SPRINT KK 4.4.4 N900PVPUDNK4
Stock Full rom : ODEX
Busybox / Zipaligned
Rooted / Superuser
No Knox ( Disabled )
DOWNLOAD
http://www.mediafire.com/download/uxtwh147vbwp6zf/N900PVPUDNK4_ODEX_NO_KNOX.zip
Md5:82c523e8a305640de1a2d0a3976168be
SPRINT KK 4.4.4 N900PVPUDNK4
Stock Full rom : DEODEXED
Busybox / Zipaligned
Rooted / Superuser
No Knox ( Diasbled / Removed )
Custom Kernel ****
DOWNLOAD
http://www.mediafire.com/download/m7azpwfqf9y67c7/N900PVPUDNK4_DEODEX_NO_KNOX.zip
Md5:cbe89dd1d66ce0511df0ba8f1714a7c
SPRINT KK 4.4.4 N900PVPUDNK4
Stock rom : DEODEXED, NO KNOX, and DEBLOATED ( #2 )
Busybox / Zipaligned
Rooted / Superuser
No Knox ( Disabled / Removed )
Volume Mod / 300+ Fonts ( Thanks DevilDog512 )
Custom Kernel ****
DOWNLOAD
http://www.mediafire.com/download/p1lexsxxnk5ed1j/N900PVPUDNK4_DEODEX_NO_KNOX_DEBLOAT.zipMd5:478b9e046e9c2c5d223ed9ba9549855cc
To Install : From NK4
1. Download rom
2. Copy and paste to sd card
3. Boot into custom recovery
4. Wipe system, cache and Delvik-cache
5. Install zip
To Install : From NC5 or NH7
1. Download rom
2. Copy and paste to sd card
3. Boot into custom recovery
4. Wipe system, cache and Delvik-cache
5. Install zip
6. Boot up device let settle down
7. Download zip below ( NK4 modem and bootloader )
http://www.mediafire.com/download/jk7qevy1swwfw2e/N900PVPUDNK4_MODEM_BOOTLOADER.zip
8. Extract the zip files
9. Boot into download mode
10. Use odin 3.07 from zip click PDA box flash modem first
11. Boot into download mode again
12. Use odin 3.07 from zip click the bootloader box flash bootloader
13. ENJOY !!!
**** Custom Kernel : All the KNOX files from the Boot.img / initrd folders have been removed. The Boot.img is also where the Kernel is located. This causes the device to boot up with ( KERNEL IS NOT SEANDROID ENFORCING ) header Flags ( lasts about 3 seconds ). You get the same Flags after installing a custom recovery. THIS IS NORMAL !!! It eliminates 8 KNOX files from being reinstalled at boot up !!!
KK 4.4.4 NK4 [DEBLOATED]
WHAT WAS REMOVED
APP
Accuweather2013.apk
Blurb.apk
Books.apk
Chrome.apk
Dropbox.apk
DropBoxOOBE.apk
Easysettings.apk
EasyFavoritesContactsWidget.apk
Hangouts.apk
Lounge.apk
Magazines.apk
MobilePrintSvc_HP.apk
MobilePrintSvc_Epson.apk
MobilePrintSvc_Samsung.apk
Music2.apk
PolarisOffice5.apk
SamsungHub.apk
samsungHubUpdater_fHD.apk
YaHooStockPhone2013.apk
PRIV-APP
CloudAgent.apk
GolfShotViewer_H.apk
GroupPlay.apk
ID.apk
MagazineHome.apk
SamsungApps_H.apk
sCloudBackupApp.apk
sCloudDataRelay.apk
sCloudDataSync.apk
sCloudQuotaApp.apk
sCloudsyncCalender.apk
sCloudSyncContacts.apk
sCloudSyncSbrowser.apk
sCloudSyncNote3.apk
SketchBookStub.apk
SkyfireToolbar.apk
StoryalbumActivationUpgrade.apk
Storyalbumwidget.apk
KK NK4 KERNELS
STOCK NK4 DOWNLOAD
http://www.mediafire.com/download/uu7b8b9s2vmfu2n/NK4_STOCK_KERNEL.zip
STOCK NK4 NOKNOX DOWNLOAD
http://www.mediafire.com/download/7p10zin07w887dt/NK4_STOCK_KERNEL_NOKNOX.zip
NK4 BEAST (THANK YOU FREEZA) KERNEL DOWNLOAD
http://www.mediafire.com/download/igubb72oi3vb07j/NK4_BEAST_KERNEL.zip
Just copy and paste to internal storage or SD card then flash through your custom recovery
KK NK4 MAX VOLUME
DOWNLOAD
http://www.mediafire.com/download/4kd09de9d40yd8a/KK_NK4_MAX_VOLUME.zipFor those of you who are missing the volume mod for NK4 here you go !!! I'm going to include it in the Debloated version.Just copy and paste to sd card wipe cache and Delvik-cache, install zip. ENJOY !!!!
Nice will this be stock base!!!!
Chaz187 said:
Nice will this be stock base!!!!
Click to expand...
Click to collapse
Hey Chaz, its all stock the deodex version has an altered kernel. But if you don't want the flags just extract a stock boot.img from a stock NK4 .tar and swap it out with the boot.img in the zip. But the knox_data folders with come back on boot up but they will be empty. Either way knox is completely disabled, there are no container files to put the data in .
jimzweb1 said:
Hey Chaz, its all stock the deodex version has an altered kernel. But if you don't want the flags just extract a stock boot.img from a stock NK4 .tar and swap it out with the kernel in the zip. But the knox_data folders with come back on boot up but they will be empty. Either way knox is completely disabled, there are no container files to put the data in.
Click to expand...
Click to collapse
Nice glad to see a nk4 rom.... i may tinker with it.... hehehe.
Thanks
Chaz187 said:
Nice glad to see a nk4 rom.... i may tinker with it.... hehehe.
Thanks
Click to expand...
Click to collapse
No problem, now there is a deodexed system to work with.
Just flashed with zero issues.... nice job
THANKS.
Chaz187
Great job, man! :good::good::good:
Looking forward to the stock deodexed and debloated rom.
Thanks for sharing :highfive:
Always nice to have a good modded base to go back to. TY! :good:
DarkAngel said:
Always nice to have a good modded base to go back to. TY! :good:
Click to expand...
Click to collapse
I believe its stock other then the knox remove and the kernel work running it now so far so good.... but stock makes me mad.. i will do some good things to it.
Chaz187 said:
I believe its stock other then the knox remove and the kernel work running it now so far so good.... but stock makes me mad.. i will do some good things to it.
Click to expand...
Click to collapse
I have no doubt you will LOL. I de-odexed a stock base from back when I was using NK4 for a bit but it had knox. Glad this one is a straight shot, no hassle, knox free version if one needs a good base to go back to. I have been wanting to see more NK4 Base Custom Roms come out ......... was wondering where all the NK4 love had gone......
:good:
thanks for this rom installed updated modem and baseband as you have in the instructions wiped as you put in the instructions (I actually wiped 4 times) rebooted recovery (twrp 2.8.5) installed this rom rebooted and when I got to the rom much to my surprise my old rom Chaz187 classic rom 4.4.4 was still there (with all my apps installed) with your rom installed over it which I find strange seeing I wiped 4 times and rebooted recovery. I only have 2 minor problems when I reboot I get unified deamon (eur) has stopped and twice I got touch wiz has stopped working after I click ok on both I have no ill effects from the errors. so far rom is running great. any suggestions why this happened ? thanks for this great rom!
timezone12 said:
thanks for this rom installed updated modem and baseband as you have in the instructions wiped as you put in the instructions (I actually wiped 4 times) rebooted recovery (twrp 2.8.5) installed this rom rebooted and when I got to the rom much to my surprise my old rom Chaz187 classic rom 4.4.4 was still there (with all my apps installed) with your rom installed over it which I find strange seeing I wiped 4 times and rebooted recovery. I only have 2 minor problems when I reboot I get unified deamon (eur) has stopped and twice I got touch wiz has stopped working after I click ok on both I have no ill effects from the errors. so far rom is running great. any suggestions why this happened ? thanks for this great rom!
Click to expand...
Click to collapse
When testing, I found that going from NC5 to NK4 if you don't wipe data ( factory reset ) just system and caches. You end up with a dirty flash which allows you keep most of your apps and data. If it is running with no glitches. great !! But, if the problems continue you will have install NK4 stock, rooted and flash again. Sometimes it works, sometimes it doesn't, just trying save some time.
Looks promising...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Will there be a flashable kernel that you included in the deodexed debloated no Knox version, that we could use in the deodexed no knox version to give us permissive instead of enforcing ? Also thnx for all you do here including helping ppl out .. you break it down quite well for the noobs ??????
Was going to download from my phone but cant see the captcha. So this will have to eait a few hours until i get home. Looks like fun and thanks for the nk4 rom.
daswahnsinn said:
Was going to download from my phone but cant see the captcha. So this will have to eait a few hours until i get home. Looks like fun and thanks for the nk4 rom.
Click to expand...
Click to collapse
If you request the desktop version in the browser you should be able to see the captcha.
GavinMazey said:
If you request the desktop version in the browser you should be able to see the captcha.
Click to expand...
Click to collapse
I tried that but no big deal, I'm home now.
Ok i have been running this for 2 days now with no issues at all..... great base rom to work off of!!!!
Thanks,
Chaz187
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is Google's Official KRT16M Factory Image for the Nexus 5, without any mods included, zipaligned/signed, unrooted, untouched and ready to be flashed through any custom recovery. It will always come handy to you if you want to return back to stock from a custom rom, do a fresh and clean install or simply use it as a base to add your own mods. It is not rooted as some may don't want a rooted rom but can easily be done at any time by the end user. It comes in 2 versions, odexed and deodexed. This was cooked with dsixda's Android Kitchen.
Download KTU84P/Android 4.4.4 - Odex New!!!
http://www.mediafire.com/download/5e8m6403zj806kr/hammerhead_KTU84P_ODEX_itasoulas.zip
Download KTU84P/Android 4.4.4 - Deodex New!!!
http://www.mediafire.com/download/cfgxfavc1dq1c3t/hammerhead_KTU84P_DEODEX_itasoulas.zip
Relevant post:http://forum.xda-developers.com/showpost.php?p=53548698&postcount=130
-------------------------------------------------------
Download KTU84M/Android 4.4.3 - Odex
via dev-host
Download KTU84M/Android 4.4.3 - Deodex
via dev-host
Relevant post: http://forum.xda-developers.com/showpost.php?p=53145268&postcount=120
**** OUTDATED ****
Download KOT49H/Android 4.4.2 - Odex
via MEGA
via dev-host
Download KOT49H/Android 4.4.2 - Deodex
via MEGA
via dev-host
-----------------------------------------------------------
Download KRT16M/Android 4.4 - Odex
via MEGA
via dev-host
Download KRT16M/Android 4.4 - Deodex
via MEGA
via dev-host
Installation Procedure
- You need TWRP or CWM Custom Recovery installed on your phone.
- Wipe cache & dalvik
- Wipe data/factory reset
- Format system
- Flash rom
- Wipe cache and reboot
Root Procedure (optional)
Follow this thread by Chainfire. Once rooted you may also need to install Busybox
Odexed vs. Deodexed Mini Info
- Odexed may boot faster, can receive OTA updates
- Deodexed is easily customisable but cannot receive OTA updates
Note: I do not own a Nexus 5 (I am a Galaxy Nexus/Nexus 7 2013 user) so I cannot test things for you. But it should be safe for you flashing this since the procedure with Android Kitchen is always the same. Again I am not held responsible for any damage or issues you may face with your device after flashing this. You do this at your own risk!
*** How to update Android Kitchen in order to cook succesfully Nexus 5 ROMS ***
(thanks to members a9y and Dirk64 for providing me the workaround)
- unzip the files as follows:
a. "hammerhead" in kitchen's tools/edify_defs folder
b. "api_level" in kitchen's tools/deodex_files folder (will overwrite default file in that folder)
c. "use_this_version" in kitchen's tools/deodex_files folder (will overwrite default file in that folder)
d. "smali-2.0" & "backsmali-2.0" files in kitchen's tools/deodex_files folder
- now you can cook succesfully!!!
Thread will be updated every time a new factory image from Google is available!
mine! awesome thanks
rc420head said:
mine! awesome thanks
Click to expand...
Click to collapse
Fight Ya haha
Sent from my HTC One mini using Tapatalk
Ah, and so it begins. Cant wait till Monday when I get mine. Thanks
Nice, can't wait till i get mine... hrrr
Thanks for sharing
Sent from my SGH-I337M
It has begun!!!
Sent from my SGH-T989 using xda app-developers app
added deodexed version. I guess I am done for now. See you again when google releases a new factory image. Enjoy your awesome Nexus 5! :good:
EDIT: removed deodex, will re-upload in a while. Needed to deodex private apps folder, sorry about that!
Here is a mirror if its ever needed of the STOCK factory rom from Google
http://storagecow.eu/index.php?dir=Xda/Nexus+5/Stock+4.4/
itasoulas said:
Odexed vs. Deodexed Mini Info
- Odexed may boot faster, can receive OTA updates
- Deodexed is easily customisable but cannot receive OTA updates
Click to expand...
Click to collapse
You know I never really knew the exact diff. What can be customized on deodexed that can't be on odexed? Just curious.
Hand76 said:
You know I never really knew the exact diff. What can be customized on deodexed that can't be on odexed? Just curious.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=40026270 :good:
itasoulas said:
added deodexed version. I guess I am done for now. See you again when google releases a new factory image. Enjoy your awesome Nexus 5! :good:
EDIT: removed deodex, will re-upload in a while. Needed to deodex private apps folder, sorry about that!
Click to expand...
Click to collapse
Fully deodex version link added @ 1st post (including the priv-app folder!)
As the Android Kitchen wasn't build to support Android 4.4, after I build deodex version, I had to manually go back and erase apps in working folder's system/app, move the apps from priv-app to system/app and deodex again. Now apps from priv-app folder are deodexed so I replaced the odexed versions in original deodexed zip and then zipaligned it via command through android sdk tools folders. So quite easy trick there!
I get same error like the other build posted here in this section on XDA:
Deodexed version:
TWRP install error:
Error executing updater binary in zip
FAILED
Has somebody a hint whats wrong..??.
TWRP or the build zip?
thanks
Wonderful Work
You are Awesome Bro Thanks for KitKat 4.4 Many user waiting for 4.4 wait is over Thanks for KitKat 4.4 Rom
shivasrage said:
I get same error like the other build posted here in this section on XDA:
Deodexed version:
TWRP install error:
Error executing updater binary in zip
FAILED
Has somebody a hint whats wrong..??.
TWRP or the build zip?
thanks
Click to expand...
Click to collapse
I really can't test since I do not own the phone. Maybe others give us some feedback, can you flash this people? (don't know how many you already own the phone) I guess, if the bug is really there and not just you, updater-script or update-binary files might have a fault. Maybe Android Kitchen is not suitable to cook for N5? Maybe TWRP? Try CWM maybe? The process with Android Kitchen is quite straight forward, it shouldn't give errors.
Hand76 said:
You know I never really knew the exact diff. What can be customized on deodexed that can't be on odexed? Just curious.
Click to expand...
Click to collapse
It's mostly just theming. Also, the longer boot time is only on the initial boot.
itasoulas said:
I really can't test since I do not own the phone. Maybe others give us some feedback, can you flash this people? (don't know how many you already own the phone) I guess, if the bug is really there and not just you, updater-script or update-binary files might have a fault. Maybe Android Kitchen is not suitable to cook for N5? Maybe TWRP? Try CWM maybe? The process with Android Kitchen is quite straight forward, it shouldn't give errors.
Click to expand...
Click to collapse
TWRP has issues with some update-binaries (and the same one will probably work on CWM). Grab one of their binaries from another release they've done.
Is deodexed booting?
shivasrage said:
I get same error like the other build posted here in this section on XDA:
Deodexed version:
TWRP install error:
Error executing updater binary in zip
FAILED
Has somebody a hint whats wrong..??.
TWRP or the build zip?
thanks
Click to expand...
Click to collapse
I get the same error on both deodex odex version. Tried TWRP official and the 0.1. Oddly enough I can flash Slim rom. So I'm not sure if it's recovery or ROM.
Sent from my Nexus 5 using XDA Premium 4 mobile app
It's the binary and script. Kitchen hasn't been updated in a long time and its using old binary/script. Gotta update those.
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5210. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-2.02 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build is also available. The deodexed / rooted build also has unsecure boot, courtesy of @moonbutt74
NOTE: if you flash the deodexed version and have problems with root, flash UPDATE-SuperSU-v2.02.zip from here. I don't anticipate any root problems, but just in case, this will fix it.
100% stock: STOCK-4.4.2-P5210(fixed).zip
deodexed + rooted: STOCK-ROOTED-DEODEXED-4.4.2-P5210(fixed).zip
Anyone may feel free to use this as a base for their ROM. I only ask that you give me credit.
finally
Now how sweet is this? Will flash it asap... (nasty CWM backup takes forever)
Restl3ss said:
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5210. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-1.9.4 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build will be ready soon, I'm just trying to iron out the kinks with the deodex script (about 10 apks seem to be fighting me)
Download: 100% stock P5210 4.4.2
Click to expand...
Click to collapse
I flashed this on top of Pimpdroid, and now I can use google now launcher in stock rom. Let me just imagine for a second that I achieved something impossible. And this is super fast! In a word, I am very happy.
I have a little problem when i try to install the kitkat update from samsung i get this error at the screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
and when i try to flash your stock kitkat in twrp i get this: this is for the device santos10wifi your device is santos103g
but i am 100% sure i have the p5210
damian312 said:
I have a little problem when i try to install the kitkat update from samsung i get this error at the screenshot
[/IMG]
and when i try to flash your stock kitkat in twrp i get this: this is for the device santos10wifi your device is santos103g
but i am 100% sure i have the p5210
Click to expand...
Click to collapse
have the same error!
Try flashing with philz recovery instead of twrp, i find it works a LOT better
Restl3ss said:
Try flashing with philz recovery instead of twrp, i find it works a LOT better
Click to expand...
Click to collapse
Ok which version do i need and how do i install it because i can not flash it through twrp?
Can you flash (odin ) back to 4.2.2 after flashing this?
damian312 said:
Ok which version do i need and how do i install it because i can not flash it through twrp?
Click to expand...
Click to collapse
get philz from this thread. once you have it up, wipe data, cache, dalvik cache, system, and boot. Flash zip (should install fine). reboot. enjoy.
firestorm942 said:
Can you flash (odin ) back to 4.2.2 after flashing this?
Click to expand...
Click to collapse
don't know, haven't tried. Probably can, this isn't like the galaxy S family of phones with e-fuses
Actually, wait. I seem to be having problems with philz. Getting stuck on splash screen, had to Odin. hmm
Restl3ss said:
Actually, wait. I seem to be having problems with philz. Getting stuck on splash screen, had to Odin. hmm
Click to expand...
Click to collapse
if i try to flash philz it keep saying my device is santos103g and not santos10wifi
i have 100% sure gt-p5210 it is on the back of the tablet
damian312 said:
if i try to flash philz it keep saying my device is santos103g and not santos10wifi
i have 100% sure gt-p5210 it is on the back of the tablet
Click to expand...
Click to collapse
That's an extremely weird glitch. Try odining back to 4.2.2 and start over. Maybe try a different region firmware
Happening to me to...
Can't wait for the rooted build! I wonder though, since it is based on the Canadian release, will it contain the same language pack as the European devices?
VIRGIN KLM said:
Can't wait for the rooted build! I wonder though, since it is based on the Canadian release, will it contain the same language pack as the European devices?
Click to expand...
Click to collapse
Rooted / deodexed build will be up in about 15 minutes, it's uploading right now and at about 84%
Took enough work, this thing did NOT want to be deodexed. Took about 6 hours.
edit: it's up. enjoy
damian312 said:
if i try to flash philz it keep saying my device is santos103g and not santos10wifi
i have 100% sure gt-p5210 it is on the back of the tablet
Click to expand...
Click to collapse
Restl3ss said:
That's an extremely weird glitch. Try odining back to 4.2.2 and start over. Maybe try a different region firmware
Click to expand...
Click to collapse
firestorm942 said:
Happening to me to...
Click to expand...
Click to collapse
Then there is a missmatch between your recovery device name and the device name in the zip. I think your recovery is made with device name santos103g. and that doesn't work with a recovery script that searches for santos10wifi. So manually change name in the update-script to search for santos103g and u are good or the maker of the recovery needs to make a fix Or u flashed a recovery that works, but for another device
Hazou said:
Then there is a missmatch between your recovery device name and the device name in the zip. I think your recovery is made with device name santos103g. and that doesn't work with a recovery script that searches for santos10wifi. So manually change name in the update-script to search for santos103g and u are good or the maker of the recovery needs to make a fix Or u flashed a recovery that works, but for another device
Click to expand...
Click to collapse
i don't have enough knowledge to fix that
would you fix the recovery if i upload it?
Same issue runing CAG-mans latest ROM
The "update-script" contains the following:
assert(getprop("ro.product.device") == "santos10wifi" || getprop("ro.build.product") == "santos10wifi" || abort("This package is for \"santos10wifi\" devices; this is a \"" + getprop("ro.product.device") + "\".");
ui_print("");
ui_print("+++++++++++++++++++++");
ui_print(" TWRP v-2.7.1.0 ");
ui_print("+++++++++++++++++++++");
ui_print("Galaxy Tab 3 gt-p5210");
ui_print("+++++++++++++++++++++");
#
ui_print("Flashing");
ui_print("+++++++++++++++++++++");
#
#
package_extract_file("recovery.img", "/dev/block/mmcblk0p11");
#
ui_print("Done");
ui_print("+++++++++++++++++++++");
EDIT: Did a full stock reflash in odin, then flashed TWRP 2.7 (the oen misslabled 2.6.3.0) in Odin.
Still same error when flashing TWRP-v2710-gtP-5210.zip in recovery.
Same issiu when trying to flash the PhilzAdvCWM.6_55_0-gtP-5210.zip in recovery
EDIT: Found an old CWM 6.0.2.8 and flashed it in Odin, From there I was able to flash the PhilzAdvCWM.6_55_0-gtP-5210.zip and it booted fine and from there the TWRP was flashable to.
EDIT: And now stuck on Sammy logo
on recovery and vendor
hey all,
my instructions to install recovery are clear. again, you must dd write cwm as it is not a flashable zip.
AFTER you have done that then you can flash philz or twrp because they are flashable zips.
this is a re-worked system/vendor directory http://d-h.st/kSw
to address samsung's strange use of symlinks in vendor/lib
the rom hangs at boot because after copy/rebuild to a flashable zip the symlinks in vendor directory get broken
this is not a flashable zip.
instructions extract the contents and drop them into your rom.zip. you should all be familiar with the android
directory structure. when prompted to overwrite, do so.
m
TEAM ACHERON PRESENTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Since there is a custom recovery for the SM-T237P now - major thanks to @moonbutt74 - I have a Stock ROM zip available.
Please have a custom recovery installed. Here : http://forum.xda-developers.com/showthread.php?p=57660932
Two versions - Stock (only removed KNOX) and slightly debloated (removed KNOX and most google apps - can be re-downloaded from the play store)
THIS CAN ALSO BE A BASE ROM FOR OTHER DEVs or POTENTIAL DEVs TO USE FOR FURTHER DEVELOPMENT
The CREDITS
TEAM ACHERON - for the love and support
@scarmon25 - Amazing teacher
@lickarock - Amazing teacher and much patients
@bix2010 - Awesome Team member
@bilgerryan - One hell of a Dev & good guy
@ShinySide - root and recovery guide
@safariking - working with him on the SU/Root issues on the tab 4 7in
@AL_IRAQI - for support and ideas
@moonbutt74 - for the dev knowledge, community attitude of helping when you can & Philz recovery for SM-T237P
Testers : Very important - made sure everything works
@VerneVerne - lead tester
@mysticjp @dave5777
@trevortf
Change log :
Code:
Fixed :
Fonts - able to select in settings now
Updated :
SuperSU to V2.48
ROM includes :
ROOT (SuperSU v2.48)
Busybox
init.d support
Adaway (for those that want to get rid of those annoying ads)
Viper4Android (need to install drivers thru the app if you like louder music and more bass)
google DNS tweak
IPv4 & IPv6 speed tweaks
PLEASE HAVE A RELIABLE BACKUP OR ODIN AND SM-T237P FIRMWARE READY TO GO. just in case
INSTALL DIRECTIONS :
download ROM - make sure the MD5 SUM matches (i can't fix a bad download)
Reboot to philz recovery
Get it here : http://forum.xda-developers.com/showthread.php?p=57660932
Wipe to install new ROM (in philz recovery) - or you can manually wipe cache/dalvik cache/data/system
install ROM zip
reboot to system
set up and enjoy
DOWNLOAD LINKS :
Full Stock - No Knox : https://www.androidfilehost.com/?fid=95916177934553859
MD5 SUM : ab03cf13802a81c4c6acb8f97db8517c
Stock - no Knox - debloated : https://www.androidfilehost.com/?fid=95916177934553869
MD5 SUM : 31064fb1ec62083f486335be540ae038
ROM OS Version: 4.4.2 TW Kitkat
ROM Kernel: Linux 3.10.0
Based On: Samsung Firmware
Version Information
Status: stable
Created 2015-02-28
Last Updated 2015-04-11
Click to expand...
Click to collapse
-
IS YOUR SUPERSU UP TO DATE? GO HERE TO FIND OUT
-
Stable : http://forum.xda-developers.com/showthread.php?t=1538053
-
Beta : http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
KNOWN ISSUES :
PLEASE USE THIS BUG REPORT IF YOU WANT A RESPONSE AND TO HELP ME FIX THE PROBLEM
Device:: (device name)
Baseband: (NG2 / NK2 ect...)
ROM Ver: (build number of ROM)
Description: (please state install -full wipe or dirty flash, what's wrong, "possible fixes if known" and a way to recreate the issue)
Click to expand...
Click to collapse
NONE - should all be fixed -
MINE - possible future mods and tips/tricks
Waited al long time for this
FIRST!
Downloading de-bloated version now. will report back with any issues.
Everything running perfectly. Thank you!
Feel free to post any issues you guys come across.
24 hrs
Used device hard for past 24 hrs, no issues so far. :good:
Seems to be working great so far. Thank you
Sent from my SM-T237P using XDA Free mobile app
screen sharing not working
Found first issue, screen sharing not working with Roku3. Thought it was something I deleted so dirty flashed, still no go. Reinstalled stock from backup and works fine.
This is not a deal breaker but, I use it quite often.
stesul411 said:
Found first issue, screen sharing not working with Roku3. Thought it was something I deleted so dirty flashed, still no go. Reinstalled stock from backup and works fine.
This is not a deal breaker but, I use it quite often.
Click to expand...
Click to collapse
I haven't removed any screen sharing apps (all share and direct share).
If you could pull a logcat while trying to connect to your Roku I can see what got messed up.
screen sharing update
I jumped the gun, screen sharing working, issue was with the Roku and wifi connection. Reset Roku and rebooted router.
Good deal.
finally got around to installing, everything looks good so far only thing id like is recovery, download reboot menu but other then that looking good!
mysticjp said:
finally got around to installing, everything looks good so far only thing id like is recovery, download reboot menu but other then that looking good!
Click to expand...
Click to collapse
You can add that easily by installing Xposed Framework, and then the APM+ extension.
mysticjp said:
finally got around to installing, everything looks good so far only thing id like is recovery, download reboot menu but other then that looking good!
Click to expand...
Click to collapse
-
long_tall_texan said:
You can add that easily by installing Xposed Framework, and then the APM+ extension.
Click to expand...
Click to collapse
Wanam kit works as well. That's what I use.
Wow, i have been waiting for this! I will try it out immediately
THANK YOU DEVS!!!
To the Dev - I want to start learning how to create android roms. You said you welcome others to build on what you started here. So what kitchen are you using for this build? Or would you recommend a different one? Thanks !
rrhaskin said:
To the Dev - I want to start learning how to create android roms. You said you welcome others to build on what you started here. So what kitchen are you using for this build? Or would you recommend a different one? Thanks !
Click to expand...
Click to collapse
Or... I can make one for you guys. I personally use archikitchen but has problems with bootanimation in which I don't know why. Anyway, g_ding84 already made a good base so I don't think you would need a kitchen. Just a good file editor and a few more Idk. If you guys want I can perhaps make a custom one on my free time I can't make a custom rom for T330NU because of problems with my base. But g_ding84 base has no problems so why not develop off of it?
-DUHA
rrhaskin said:
To the Dev - I want to start learning how to create android roms. You said you welcome others to build on what you started here. So what kitchen are you using for this build? Or would you recommend a different one? Thanks !
Click to expand...
Click to collapse
I use Ricky's Rom kitchen
Here :
http://forum.xda-developers.com/showthread.php?t=2695356
Very user friendly. With this base SuperSU is already updated, you have INIT.D support and busybox. Only thing you will need to do is deodex the ROM. Which you can do with that ROM kitchen
Be creative, think outside the box....be a hero man!!!! Lol
DUHAsianSKILLZ said:
Or... I can make one for you guys. I personally use archikitchen but has problems with bootanimation in which I don't know why. Anyway, g_ding84 already made a good base so I don't think you would need a kitchen. Just a good file editor and a few more Idk. If you guys want I can perhaps make a custom one on my free time I can't make a custom rom for T330NU because of problems with my base. But g_ding84 base has no problems so why not develop off of it?
-DUHA
Click to expand...
Click to collapse
That what this base is for
Maybe just a good deodexer tool.
On your T330NU ROM - do you have the firmware?
g_ding84 said:
I use Ricky's Rom kitchen
Here :
http://forum.xda-developers.com/showthread.php?t=2695356
That what this base is for
Maybe just a good deodexer tool.
On your T330NU ROM - do you have the firmware?
Click to expand...
Click to collapse
I got the firmware here.
http://forum.xda-developers.com/showthread.php?p=58428539
My base has a broken bootanimation in which could be caused by the new update from archikitchen.
-DUHA
[GOTO : Deodex Thread | TWRP Thread]
This is deodex thread for our devices. Why you need to make deodex to your rom?
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Deodex
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What you can do with deodex:
Install Unofficial Xposed at Touchwiz
Install UI mods by ivan-68 (will make a thread later)
Free some /system space for you own mods
What you CAN'T do:
Fire a laser from you A3 camera
Make a flash that give amnesia to peoples(like in a MIB)
All deodexes must be flashed using custom recovery(you can get it at this thread)
All deodexes by ivan-68
I'm not the guy who developed this one, but if you have a questions you can ask in this thread
Developer at XDA, at 4PDA
Warning! First-afterflash-boot will be much longer then all next boots so be patient
---Download section here---
Ok, first of all I learn you how to download from mail.ru
You just need to press this key:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[Deodex for SM-A300F]
Android 5.0.2
Download
[Deodex for SM-A300H]
Android 5.0.2
There are two versions of deodex:
Standart deodex - deodex of sm-a300h rom version, you can't install mods by ivan-68 on this version, there are some framework-res issues, but you still can install and success use xposed
Advanced version - deodex of sm-a300f rom adapted to H vesion, you can install mods and xposed on this version and be sure that all works
1. Standart deodex(you can't install mods at this one, only Xposed)
2. Advanced deodex(you will able to install mods)
[Deodex for SM-A300FU]
Android 5.0.2
Download
---Installation section here---1. Reboot into recovery
1.1 MAKE A NANDROID BACKUP
2. Install zip
3. Reboot
4. Go make some tea(first boot will 5-8 minutes)
5. Done!
Thank you sir!!! For making mods for our A3 brothers.
I will try the deodoxed ROM for A300F and will report on how it goes.
Sorry, I have a question before flashing the zip. Do I have to do a data, cache, and dalvik cache wipe before flashing the deodexed ROM zip?
Do I have to do a data, cache, and dalvik cache wipe before flashing the deodexed ROM zip?
Click to expand...
Click to collapse
No
All that is needed is already written in the installer
@Intel777chanel @ivan-68
I flashed Deodexed_A300F_5.0.2.zip on my A300F running stockrom 5.0.2 using TWRP without problem but when phone boots up I, there are a lot of Google Play services Force Closing so rapidly I couldn't use my phone. Example: "Unfortunately, Google Play services has stopped.".
How can I fix this error???
How can I fix this error???
Click to expand...
Click to collapse
install it through after Deodex: Replace_Gapps.zip
ivan-68 said:
install it through after Deodex: Replace_Gapps.zip
Click to expand...
Click to collapse
Thank you, i will report back when i habe the time ?
Some People make nandroid backup of all 6 partition for 300-fu and put on this forum for me? I don't have PC and i don't make start. I'm make bootloop for flash this.
Hi there, I just flashed this deodex version from here but I'm stuck for a while now (a lot more than 8 minutes !) on the Samsung Galaxy A3 boot logo...
What should I do ? Try to get back to TWRP (if I still got it...) to restore my old original Samsung ROM ?
Thanks for your advices !
Edit : Well... this one was tricky. If someone is in the same case once : stuck on Samsung boot logo, trying to cut off power via Power+Home buttons not responding... I succeeded to enter download mode, then flashed again auto root by Chainfire then flash TWRP and ASAP enter recovery mode. Had to do it two or three time because it tried to enter in normal mode (and then bootloop). Then I restored my backup from TWRP.
I don't know why your deox didn't work...
You must first upgrade on 5.0.2 from odin.
If anyone is flashing the zips from post 1 then you definately need to be on lollipop already or update with odin. If you update with odin and lose imei/unknown baseband, you may need to flash twice. Modem fails to install on first flash. As always, run odin as administrator.
mooon3 said:
Hi there, I just flashed this deodex version from here but I'm stuck for a while now (a lot more than 8 minutes !) on the Samsung Galaxy A3 boot logo...
What should I do ? Try to get back to TWRP (if I still got it...) to restore my old original Samsung ROM ?
Thanks for your advices !
Edit : Well... this one was tricky. If someone is in the same case once : stuck on Samsung boot logo, trying to cut off power via Power+Home buttons not responding... I succeeded to enter download mode, then flashed again auto root by Chainfire then flash TWRP and ASAP enter recovery mode. Had to do it two or three time because it tried to enter in normal mode (and then bootloop). Then I restored my backup from TWRP.
I don't know why your deox didn't work...
Click to expand...
Click to collapse
I had a similar adversity. At first I didn't know what to do as well when my phone's stuck in Samsung Galaxy A3 bootlogo(not to be confused with boot animation). Then I found out it was because I did a full wipe before flashing the Deodexed.zip. So in short, the solution to your problem is simply not do a wipe before flashing the Deodexed.zip. You must straight flash the Deodexed.zip without wiping anything(scripts are already written in the zip itself). That worked for me as the phone finally gets through the bootlogo. Hope this can solve your problem.
OMG! Guys, can you see "wipe system" in installation instruction? No? I'm too. It's just because no MUSTN'T do any wipes.
So, restore you nandroid backup and flash zip without wiping.
is there a deodex rom for sm-a500fu?
mjs87 said:
is there a deodex rom for sm-a500fu?
Click to expand...
Click to collapse
Actually is a A3 thread.
Sent from my SM-A300F using Tapatalk
It does not work with A3 sm-a300h lollipop
http://forum.xda-developers.com/galaxy-alpha/help/galaxy-a3-a5-a7-themes-apk-theme-store-t3131852
Medox Rsb said:
It does not work with A3 sm-a300h lollipop
http://forum.xda-developers.com/galaxy-alpha/help/galaxy-a3-a5-a7-themes-apk-theme-store-t3131852
Click to expand...
Click to collapse
Hey any possible to install lollipop on model sm a300m ? please
What about a300-fu
droidqwerty said:
What about a300-fu
Click to expand...
Click to collapse
First post, using the A3-FU version myself
Can't people read the main post? FU variant is included
ASHLEY117 said:
If anyone is flashing the zips from post 1 then you definately need to be on lollipop already or update with odin. If you update with odin and lose imei/unknown baseband, you may need to flash twice. Modem fails to install on first flash. As always, run odin as administrator.
Click to expand...
Click to collapse
Odin isn't working since I got windows 10. When I click AP or PDA, it says "not responding". I tried running as administrator, but no luck.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
**Welcome to the Fox Den!**
This is a stockish, pre-rooted ROM based from N950U1 3BRA5 Firmware,
Before you proceed, I cannot be held liable for the damage or malfunction of your device using these files,
you proceed at your own risk and remove my liability by continuing to any portion of this thread!
!PLEASE BE SURE TO READ ALL THE INSTRUCTIONS THOROUGHLY AND SEARCH THE POSTS BEFORE ASKING QUESTIONS!
Prerequisites:
- Your Note 8 and PC ready to flash
- READ THE ENTIRE GUIDE!
- Download and extract all required files to convenient location, keeping all files organized, on PC
- Rooted your device with SamFAIL or be on another custom ROM, FlashFire installed, and Busy-Box!Steps:Step 1 - Ensure Busybox is installed to /system/xbin.
Step 2 - Ensure that SuperSu is updated.
Step 3 - Install FlashFire, Open FlashFire and grant it permission.
Step 4 – Select the RED + button on the bottom right of FlashFire.
Step 5 – Select "Flash ZIP or OTA" button.
Step 6 – Navigate to location of Fennec ROM and select it.
Step 7 – Check the box next to (Mount /system read/write) then select the check mark in top right corner.
Step 8 – Select "Wipe" button.
Step 9 – Ensure System data, 3rd party apps, Dalvik cache, and Cache partition boxes are selected then select the check mark in top right corner. Optionally, you can select Internal storage.
*Note* – If you are coming from my ROM, no Wipe is needed, unless directed by update.*Step 10 – Long press Wipe section and position it 1st before ZIP flash.
Step 11 – Leave Reboot section set to Normal unless you plan on flashing FR Odin files, then select Download and the check mark at top right.
Step 12 – Select the Flash section at the bottom of FlashFire. Boot will take a while so relax for a while.
Features:
SuperSu
Busybox (Binary only no app)
Deodexed
Zipaligned
DeKnoxed
Dex
Download Booster
VoLTE, ScreenCapture, TouchSensitivity, UHQ Quick Panel Toggles
VoLTE Settings Menu
Wi-Fi Calling Phone Settings Menu
Call Recording
VVM button w/Badge (may not work for all carriers, let me know)
Messages - Save/Restore to SD
Messages - Set as Ringtone
Messages - Many others
HotSpot - added apn "dun" as fixed (does not work for all carriers, use shortcut master lite to add)
HotSpot - SSID changed to Galaxy Note8 Net "4digits" for all carriers
Performance tweaks
More coming soon...
Not Working
Some Carrier Features (Due to it being stock U1)
You tell me!
Mods Post 2
Changelog Post 3...
Downloads:
ROM
Fennec ROM_V1.0 - (Full Wipe suggested)
BlueFox_U1-BQL2_VBeta4.zip
Odin Files
*These Odin files are based off N950U1 Bootlader for best performance with U1 ROM*
- Flash with Prince Comsy's Odin -
For V2/V2.5 Root
FR_U1-2BQL2_CMBO-2AQL1 .... (These replace BlueFox_U1_AQL1-OdinFiles_BQL9Moddem)
FR_Optional U-2BQL Carrier Modems ... (Can be used instead of CP_U1-2BQL2 Modem depending on carrier)
For V3 Root
FR_U1-3BRA5_CMBO-3ARA3 .... (These replace BlueFox_U1-3ARA3-OdinFiles_3BRA9Modem)
FR_Optional U-3BRA Carrier Modems ... (Can be used instead of CP_U1-3BRA5 Modem depending on carrier)
For those on V3 Bootloader, not rooted
The official SamFAIL V3 has been updated..., unless you really want these.
1.Flash V3 Bootloader Odin files, FR_U1-3BRA5_CMBO-3ARA3 In Prince Comsy's Odin,(yes it had a security error).
2. Boot to Download mode.
3. Flash the SamFAIL V3 System file according to SamFail Part 1 Instructions Here (normal error and upload screen).
4. Boot to Download mode.
5. Flash V3 Bootloader Odin files again, FR_U1-3BRA5_CMBO-3ARA3
6. Device should reboot. Relax, boot takes a few.
*If you get a bootloop on SamFAIL startup, flash carrier CSC in Odin. 3BRA9 CSC*
7. Skip setup and install FlashFire
8. Flash BlueFox ROM following instructions above.
Thanks and Credits:
@me2151 - SamFAIL for Galaxy Note8
@partcyborg - Finding root for Galaxy Note8
@Chainfire - SuperSU & FlashFire
@OptimuSlime - Testing BlueFox ROMs
@Team DevDigitel - ROM Tips
@jrkruse - VoLTE icon fix
- More coming soon (as before)
Other Links
*Culpeo ROM*
*SM-N950U1 XAA Stock Recovery Guide*
*Carrier Flashing and Switching Guide*
*Edit APN Settings & Native HotSpot Guide*
*SM-N950U/U1 Factory Binary, Combination Firmware*
*S Note & Working Action Memo*
*Free SIM Unlock Service by: @instrumentaly*
XDA:DevDB Information
Fennec ROM, ROM for the Samsung Galaxy Note 8 (2017 Phone)
Contributors
BlueFox721
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: V1.0
Stable Release Date: 2018-03-25
Created 2018-02-13
Last Updated 2018-06-12
Mods and Updates:
*Instructions for flashing MODs in FlashFire*
Select Red "+" circle at bottom right.
Select Flash Zip or OTA.
Select MOD to flash.
Check Mount /system read/write
Select Flash and Profit!
Boot Animations:
Star Trek 2009 Intro with Enterprise_Sound
(Preview Coming)
Tron GENII LightCycle_Sound - Coming Soon
(Preview Coming Soon)
Black Hole revised for Note8
Original by @motomotomotoG
(Preview Coming)
Stock Samsung Boot Animation
Stock Carrier Boot Animations (All)
More Coming soon to a Den near you....
Changelog:
2018-04-14 - BootAnimation Update
Updated current BootAnimations to be compatible with Carrier based ROMs
Added Stock Carrier BootAnimations (All in One Flash)
2018-03-25 - Fennec ROM V1.0:
Rebased off U1 3BRA5
Rebuilt OMC & CSC directories for all carriers
Enabled VoLTE, VoWiFi, Wi-Fi Calling, Video Calling, RCSchat for all carriers (although enabled, may not be available from carrier)
Added many features to Messages for all carriers
Added shutter sound menu, camera during call, select record mode to camera
Added call recording menu, VVM & Badge to phone
Added Visual Voice Mail apps for some carriers (let me know if they work)
VoLTE icon Fix by jrkruse
Added Settings info for ROM
Minor debloat
Updated Gapps
Minor Performance Tweaks
2018-03-03 - Odin Files:
Added Boot Animations to MODs
2018-02-23 - Odin Files:
Updated Odin files for FennecROM
2018-02-16 - Odin Files:
Fix Security Features
2018-02-14 - Odin Files for 3BRA Users:
Uploaded Odin Files for 3BRA Users
2018-02-09 - BlueFox_U1-BQL2_VBeta4:
Initial Release
Added files for carrier config on startup
More CSC edits for carrier features
2018-02-07 - BlueFox_U1-BQL2_VBeta3:
Updated ROM installation information
Edited Sales Code to see if carrier activation begins at startup
Edited CSC information for some carrier features
2018-02-04 - BlueFox_U1-BQL2_VBeta2:
Updated Updater Script to root properly
Deodexed ROM
Zipaligned ROM
2018-02-01 - BlueFox_U1-BQL2_VBeta1:
Initial Build - SM-N950U1 BQL2
AQK3 Bootloader Files
Root Files Added
BusyBox Added
Up
very exciting!
So this is for the 9500 ul not u
pbedard said:
So this is for the 9500 ul not u
Click to expand...
Click to collapse
[N950U/U1/W]
What bootloader
@BlueFox721 Great work!
pbedard said:
What bootloader
Click to expand...
Click to collapse
I have linked a flashable Odin file that contains AQL1 Bootloader and BQL9 (U) Modem and one that contains AQK3 and BQL2 (U1)...choose to flash or not....The boot.img is AQL1....
Sorry for questions
pbedard said:
Sorry for questions
Click to expand...
Click to collapse
You are fine, I had not yet put the info up yet...still editing...lol
Can anyone else please verify that you can use the screen @ 180 degrees ... I asked BF and he wasnt sure about it but on my phone I'm able to use it upside down. Just curious if anyone else is already using this rom and can try.
Rom booted Hella fast
Can't wait to get home and try this!
Just to be clear ... this will or won't work if I'm on a device that has been updated to v3 bootloader , but is then rooted by the newly available root method?
Edit
The reason I ask is that I tried to flash but got into trouble I think because I tried to flash the attached Odin modem files (I'm currently on U3RA1 baseband), but rooted after upgrading to Oreo
jcrompton said:
Just to be clear ... this will or won't work if I'm on a device that has been updated to v3 bootloader , but is then rooted by the newly available root method?
Edit
The reason I ask is that I tried to flash but got into trouble I think because I tried to flash the attached Odin modem files (I'm currently on U3RA1 baseband), but rooted after upgrading to Oreo
Click to expand...
Click to collapse
You can flash just remove the boot.img by opening zip with winrar and deleting the boot.img...it will take a little time to delete...Then flash the zip...
If you already flashed it and get an error on boot, force download mode and flash your Odin files for 3BRA9
Should boot fine then
BlueFox721 said:
You can flash just remove the boot.img by opening zip with winrar and deleting the boot.img...it will take a little time to delete...Then flash the zip...
If you already flashed it and get an error on boot, force download mode and flash your Odin files for 3BRA9
Should boot fine then
Click to expand...
Click to collapse
But trying to flash the modem you listed won't work correct?
If we are on boatloader v3 can we use a modem from U1?
When you say to flash the 3BRA9 files are you talking about just returning to stock in the case of being unable to boot?
jcrompton said:
But trying to flash the modem you listed won't work correct?
If we are on boatloader v3 can we use a modem from U1?
When you say to flash the 3BRA9 files are you talking about just returning to stock in the case of being unable to boot?
Click to expand...
Click to collapse
New files for SamFAIL will have Odin files for V3 bootloader...
If you can't wait I can get you V3 flashable files for use with my rom...
BlueFox721 said:
New files for SamFAIL will have Odin files for V3 bootloader...
If you can't wait I can get you V3 flashable files for use with my rom...
Click to expand...
Click to collapse
No problem to wait .... But on the other hand would love to try your work