Hi!
My Mozart isn't connect with Zune. If I plug the usb, the windows 7 see 2 driver in device managent menu ( Windows Phone USB Devices / Windows Phone USB ). I don't see portable devices on this menu.
It's correct?
joni870303 said:
Hi!
My Mozart isn't connect with Zune. If I plug the usb, the windows 7 see 2 driver in device managent menu ( Windows Phone USB Devices / Windows Phone USB ). I don't see portable devices on this menu.
It's correct?
Click to expand...
Click to collapse
My PC indicate this. Anybody help me please. Its very important..
Anyonge successfully installed ADB/Fastboot drivers for their experias on Win 8 x64 RTM/Trial?
Because I tried:
- disabling driver integrity checks/ driver signing verifications
- installing xperia drivers from sony dev blog site
- installing drivers provided with latest flashtool
All failed - when connected my device is not recognized (even tho it shows ADB Android device in device manager with warning sign). Win7 works flawlessly.
Any advice/ideas?
Maybe there are. Use win7.
Cant u update drivers automatically using internet bro?
Sent from my X8 using Tapatalk 2
After few hours of struggle i managed to weed out the cause:
USB 3.0 and driver signature enforcement.
So I went into advanced boot option, disabled driver signature enforcement, plugged my phone to USB 2.0 port and VOILA, it works flawlessly
I've got an Xperia U (st25i) unbranded firmware 6.0.B.3.184, but my Windows 7 x64 doesn't show adb device at all, I have a working mtp device (that looks like it cannot be disabled). Same device works fine in adb on linux, even passing the usb device to a vmware machine with linux.
I've tried with Xperia_P_Xperia_U_Xperia_sola_drivers.zip and install PC Companion, but the adb devices still does not show, if I force add the adb interface from inf, windows 7 says it cannot start, there is same problem on windows 7 x86. Windows xp x86 instead automatically installs mtd devices but prompts for the adb device drivers, so I can give him the drivers. Any clue?
Make sure PC is connected to internet then connect the device in fastboot mode. Win7 downloads and installs drivers automatically.
Sent from my Blade using Tapatalk 2
Had the Same issue. Just Google for win7 64bit and xda. Sorry i have no Link. But Problem solved easy
Rapier07 said:
Make sure PC is connected to internet then connect the device in fastboot mode. Win7 downloads and installs drivers automatically.
Sent from my Blade using Tapatalk 2
Click to expand...
Click to collapse
I don't need fastboot drivers, just adb to develop, I'm always connected, but adb interface does not show at all in device manager, I don't have unknown/failed devices in device manager
sherpya said:
I don't need fastboot drivers, just adb to develop, I'm always connected, but adb interface does not show at all in device manager, I don't have unknown/failed devices in device manager
Click to expand...
Click to collapse
You have the "wrong" drivers installed. Use the drivers provided with c:\flashtool\drivers
-> then turn off internet on pc before connecting phone. <- prevents windoze from auto install via update
xperia mt27i
gazhead said:
You have the "wrong" drivers installed. Use the drivers provided with c:\flashtool\drivers
-> then turn off internet on pc before connecting phone. <- prevents windoze from auto install via update
xperia mt27i
Click to expand...
Click to collapse
The only driver windows automatically install is the mtd (that doesn't need internet because is in win), I don't have the device VID_0FCE&PID_5171&MI_01 but only VID_0FCE&PID_5171
It's a bit strange a common developer should download a non sony tool to develop with a sony phone
I had a similar problem with my XS, I get around it by enabling 'install PC companion' in connectivity settings under 'xperia'. Then when you plug the phone in, on your phone select install. It should then appear both as an MTP device the PCC installation, just cancel that latter.
I've used the wrong thread title, it should be x64 not x86, I've just verified that windows 7 32bit downloads and installs the adb driver, I had similar problem with gt7500 on windows xp 64bit, http://forum.xda-developers.com/showthread.php?t=1434319
I've solved modifying the inf file, I think I cannot change inf on windows 7 x64 because the driver becomes unsigned. Perhaps gt7500 works fine on windows 7
Heh... You stiill refuse to listen.
Install drivers provided with flashtool. Just doit and report back
mt27i
tested with internet disconnected and drivers pack in flashtool-0.9.1.0-windows.exe, same thing, windows shows only mtp device
check this out:
http://forum.xda-developers.com/showthread.php?t=1554632
more drivers:
http://www.mediafire.com/?2fxtdec2fxacux1
sherpya said:
It's a bit strange a common developer should download a non sony tool to develop with a sony phone
Click to expand...
Click to collapse
eeh.. its GOOGLE Android default tools. adb fastboot etc its all Android getit?
Request
thebrainkafka said:
Had the Same issue. Just Google for win7 64bit and xda. Sorry i have no Link. But Problem solved easy
Click to expand...
Click to collapse
Tell Me how Please....:crying:
I just solved this issue for my Xperia S.
Here are the steps:
1. Install driver on flashtool (I also install the pc companion)
1. On device manager, open the MTP device, and select reinstall device driver
2. Choose install the driver manually and list the compatible driver
3. It would only show one "USB Composite Device" for this device and install it
4. After the driver installed, the adb device just shows up!
Hallo to everyone.
Have some problems to connect my tablet to my PC.I got my Win7 Ultimate x64 is new
installed.
So i connected my Tablet i got BSOD with memory management error(dont think have something to do with tablet ,becouse my DRam was faulty)
.Hard resetet my PC.Plugged z2 again and there is nothing.. i hear the sound that say device is plugged in but no popup shows on on PC. No charging ,nothing.
On Tablet shows usb debugging connect.It is not normal .My HTC One connect while usb debugging on with my PC WITHOUT PROBLEM.If i turn usb debugging off and connect to my PC ,charging and connections works.
I thing it is windows problem but maybe someone can point me to what can i do
Reinstalling drivers did the trick
Hello,
I have a LG Zone 3 phone (Verizon) and I'm unable to connect it to the PC for ADB. It's running Android 5.1.1. My PC host is Windows 10.
So far I've managed to enable Developers Options and USB Debugging already. In storage settings the USB connection is set to MTP currently. Sadly when I connect the cable to PC nothing happens (I've tried connecting other devices to the PC to rule out the cable problem and they run just fine, so I'm guessing it's not the cable). I've tried to install different versions of drivers but none of them worked, list of files and tools I've already went through:
adb-setup-1.4.3.exe (LGAndroidDriver_WHQL_ML_Ver_1.0_All_Win7.exe, LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6.exe)
Android_Fastboot__mini_ADB_Drivers.7z
LG USB Drivers All Phone For Windows.rar
LG_Mobile_Driver_v4.8.0.zip (LG Mobile Driver v4.8.0.exe)
LGBridge_Setup.exe
LGMobileDriver_WHQL_Ver_4.8.0.exe
LGUP_Ver_0_0_3_23.zip (LGUP_8994_DLL_Ver_0_0_3_23.msi + LGUP_Install_Ver_1_14_3.msi)
UniversalAdbDriverSetup.msi
Still no luck. I got so lost right now that I don't know how to proceed. Please help me figure out which drivers exactly I need to use for the ADB to work with this device.