I have the castor windy version 16gb SGP511. I was previously rooted but not unlocked. I unlocked the boot loader. Installed the twrp image on the pac man thread which i think was dual recovery cause Philz,Cwm came out, so I can install lollipop version of the rom. Made a backup of the stock rom. Followed this instructions - Install the Lollipop ROM + GApps+SuperSU using whatever Recovery you have.
- Turn off device completely.
- Press <Volume Up> and plug USB cable.
- LED should turn blue.
- Send command: "fastboot erase recovery"
- Send command for Castor_Windy: "fastboot flash recovery TWRP_Castor_Windy.img"
- Send command for Castor: "fastboot flash recovery TWRP_Castor.img"
- Unplug USB cable.
- Device will reboot.
- When LED turns pink press <Volume Up> and <Volume Down> several times.
- You should now see TWRP
I wasnt fast enough so stock rom booted. I used Adb reboot recovery to access recovery and did as the above mentioned. Wiped i tried to install the rom which failed. Rebooted back to system and got stuck in Sony boot up screen. I can access fastboot. Read though the forums I have to find a ftf or a system image file and use a flash tool. What ftf file or system image my I use use which will let me root my device again.
Thanks Steve
Kamaleon said:
What ftf file or system image my I use use which will let me root my device again.
Thanks Steve
Click to expand...
Click to collapse
Try this Xperia downloader tool. Should let you see which versions are which. If you want an easy root, then stay away from the KitKat builds, unless you want to unlock bootloader.
http://forum.xda-developers.com/cro...xperifirm-xperia-firmware-downloader-t2834142
Use Flashtool to flash your downloaded ftf file. Just make sure your device is charged.
http://forum.xda-developers.com/showthread.php?t=2335555
I believe flashtool will even install the drivers for your 511
Thanks for the reply. Flashed ftf file and my tablet is up an running. Do I have to unlock my bootloader again or is it unlocked already?
Kamaleon said:
Thanks for the reply. Flashed ftf file and my tablet is up an running. Do I have to unlock my bootloader again or is it unlocked already?
Click to expand...
Click to collapse
Well, now this depends.
If you previously had KK running, and flashed a original version JellyBean ROM, then it probably locked the bootloader again.
If you flashed the same version as you had previously installed, then it didn't lock it again.
Moscow Desire said:
Well, now this depends.
If you previously had KK running, and flashed a original version JellyBean ROM, then it probably locked the bootloader again.
If you flashed the same version as you had previously installed, then it didn't lock it again.
Click to expand...
Click to collapse
Thanks. Yes i was unlocked already, went through the process again to verify. Trying to upgrade my firmware which is 17...........402. to a kk build firmware. I have the old cwm recovery 6.0.4.6. being trying to upgrade or even change recovery to any recovery except dual recovery. Through fastboot which none of them stick. Fastboot erase recovery
fastboot flash recovery recovery.img all of them(CWM,TWRP,PHILZ). The process goes smoothly but when I access recovery the old recovery comes up. What seems to be problem? I cant change my recovery or even upgrade it. I never have had this problem before some insight needed before i take a wrong turn. LOL.
Kamaleon said:
Thanks. Yes i was unlocked already, went through the process again to verify. Trying to upgrade my firmware which is 17...........402. to a kk build firmware. I have the old cwm recovery 6.0.4.6. being trying to upgrade or even change recovery to any recovery except dual recovery. Through fastboot which none of them stick. Fastboot erase recovery
fastboot flash recovery recovery.img all of them(CWM,TWRP,PHILZ). The process goes smoothly but when I access recovery the old recovery comes up. What seems to be problem? I cant change my recovery or even upgrade it. I never have had this problem before some insight needed before i take a wrong turn. LOL.
Click to expand...
Click to collapse
You mean the "factory" recovery comes up.
Well, just for info, you don't need to run the fastboot "erase" command when installing a recovery. Not necessary as the new image file will overwrite the existing.
Also, you don't exactly need to flash a recovery either. You can connect via USB, boot to bootloader, and run the "fastboot boot recovery.img (or whatever you named it) as long as your custom recovery is in the same folder as the fastboot.exe. This will just the custom recovery without installing it, thus allowing you to flash stuff.
As to why your fastboot flash isn't sticking, I'm new to the Sony tab, so haven't learned all the quirks yet as compared to Acer tabs.
Moscow Desire said:
You mean the "factory" recovery comes up.
Well, just for info, you don't need to run the fastboot "erase" command when installing a recovery. Not necessary as the new image file will overwrite the existing.
Also, you don't exactly need to flash a recovery either. You can connect via USB, boot to bootloader, and run the "fastboot boot recovery.img (or whatever you named it) as long as your custom recovery is in the same folder as the fastboot.exe. This will just the custom recovery without installing it, thus allowing you to flash stuff.
As to why your fastboot flash isn't sticking, I'm new to the Sony tab, so haven't learned all the quirks yet as compared to Acer tabs.
Click to expand...
Click to collapse
I mean cwm recovery v6.0.4.6 comes up the one I installed Doomlords thread with the advanced kernel. I ran fastboot erase recovery command to see if the new recoverys would stick and replace it but it didn't. I have done your instructions before hand thats how I am accessing the bootloader. "fastboot boot recovery.img all add this command to see If the new recovery would pop up. Thanks for the reply.
Kamaleon said:
I mean cwm recovery v6.0.4.6 comes up the one I installed Doomlords thread with the advanced kernel. I ran fastboot erase recovery command to see if the new recoverys would stick and replace it but it didn't. I have done your instructions before hand thats how I am accessing the bootloader. "fastboot boot recovery.img all add this command to see If the new recovery would pop up. Thanks for the reply.
Click to expand...
Click to collapse
Well, here's what I think is going on.
1. You installed Doomlords kernel. Note that this is a foto-kernel, which means the kernel itself has a partition that contains a recovery. What this means, is that as long a the fota-kernel was not replaced, then that specific recovery will be there.
2. You flashed a normal recovery. Now, I think this is there, but because of the fota-kernel, the fota-kernel is taking precedence.
Like I said, I don't know a lot about this Sony tab and the different partitions,as they are different from other tablets I am familiar with.
What puzzles me, is that if you flash a new "ftf" without changing any options in Flashtool, it "should" rewrite "every" partition on the tab, and install Stock recovery.
Now, based on my experience with Acer A500x and A700x tablets, I can say there are times when your issue happens. Rare, but it does happen. Things say they flash ok, but the old stuff still remains. The only option at that point, was to go back to a totally original version of the firmware.
Not sure I'm helping you on this. But the good thing, is that you can Fastboot Boot Recovery.
MD
Moscow Desire said:
Well, here's what I think is going on.
1. You installed Doomlords kernel. Note that this is a foto-kernel, which means the kernel itself has a partition that contains a recovery. What this means, is that as long a the fota-kernel was not replaced, then that specific recovery will be there.
2. You flashed a normal recovery. Now, I think this is there, but because of the fota-kernel, the fota-kernel is taking precedence.
Like I said, I don't know a lot about this Sony tab and the different partitions,as they are different from other tablets I am familiar with.
What puzzles me, is that if you flash a new "ftf" without changing any options in Flashtool, it "should" rewrite "every" partition on the tab, and install Stock recovery.
Now, based on my experience with Acer A500x and A700x tablets, I can say there are times when your issue happens. Rare, but it does happen. Things say they flash ok, but the old stuff still remains. The only option at that point, was to go back to a totally original version of the firmware.
Not sure I'm helping you on this. But the good thing, is that you can Fastboot Boot Recovery.
MD
Click to expand...
Click to collapse
I started from zero again flashed ftf Firmware SGP511_17.1.1.A.0.402. Verfied that i was bootloader unlocked I still was. Used fastboot to flash Dooms Kernel, without a problem used cwm revovery to flash Supersu. Tried to upgrade my firmware with the prerooted rooms in thread flashed with out a problem but no difference was provided. Verified in settings and initial firmware stands (SGP511_17.1.1.A.0.402). Tried to flash CM12 got stuck on a bootloop. Fastboot flashed the boot img provided didn't work for me so I flahed Teslas rom Followed instructions provided
1. Make sure you have CWM installed and a working nandroid backup
2. Download the ROM.
3. Place the ROM on your SD-Card.
4.Extract boot.img included in zip and fastboot flash it via Flashtool or CMD
5. Reboot to recovery.
6. Wipe data-factory reset/cache partition/dalvik cache
7. Flash the ROM.
Flash went through but when I try to access recovery through the rom or adb recovery doesnt come up. The tablet just stays black on recovery screen and the tablets led turns yellow. I have adb access so went to access fastboot flashed different recoverys. None of them (flashed without a problem), work but if a flashed Dooms I have access to recovery again, but loose functionality of the rom it gets stuck on sony screen. I have to do the steps all over again without a working recovery. This has being a learning experience I am HTC guy so the process with sony products is new to me as well. So where do you think I should go on from here; flash a newer ftf or lock and unlock my bootloader again to see if something happens or just move on jajajajj . Anyways thanks a lot for your help.
Kamaleon said:
I started from zero again flashed ftf Firmware SGP511_17.1.1.A.0.402. Verfied that i was bootloader unlocked I still was. Used fastboot to flash Dooms Kernel, without a problem used cwm revovery to flash Supersu. Tried to upgrade my firmware with the prerooted rooms in thread flashed with out a problem but no difference was provided. Verified in settings and initial firmware stands (SGP511_17.1.1.A.0.402). Tried to flash CM12 got stuck on a bootloop. Fastboot flashed the boot img provided didn't work for me so I flahed Teslas rom Followed instructions provided
1. Make sure you have CWM installed and a working nandroid backup
2. Download the ROM.
3. Place the ROM on your SD-Card.
4.Extract boot.img included in zip and fastboot flash it via Flashtool or CMD
5. Reboot to recovery.
6. Wipe data-factory reset/cache partition/dalvik cache
7. Flash the ROM.
Flash went through but when I try to access recovery through the rom or adb recovery doesnt come up. The tablet just stays black on recovery screen and the tablets led turns yellow. I have adb access so went to access fastboot flashed different recoverys. None of them (flashed without a problem), work but if a flashed Dooms I have access to recovery again, but loose functionality of the rom it gets stuck on sony screen. I have to do the steps all over again without a working recovery. This has being a learning experience I am HTC guy so the process with sony products is new to me as well. So where do you think I should go on from here; flash a newer ftf or lock and unlock my bootloader again to see if something happens or just move on jajajajj . Anyways thanks a lot for your help.
Click to expand...
Click to collapse
Well, I'm not sure which route to take.
However, I will tell you what I have learned the other day.
I have the 521 with unlocked bootloader. Rooted with my own boot.img, flashed SuperSU using "flashboot boot recovery.img" (yeah, sometimes it doesn't show on the display, so it takes a few times).
Now, other day I was going to check out the new LyPop pre-rooted. Fastboot flash recovery recovery,img, and it won't boot it to recovery like it should. Like it's not flashed. Tried it a couple times. Now, I didn't install the dual recovery as I'm not sure how that kernel (boot.img) will interact with my current tabs OS. Not to mention I need it for my work until tomorrow. But strangely it sounds like the same issue you have.
This weekend I will investigate it. As for me, I will probably flash the Stock ftf lyPop build, and just root it using a modified boot.img.
One thing I do know, is flashing a custom recovery to the "recovery" partition, doesn't seem to work like it used to work on other devices. It seems the flashing to the "Fota kernel" partition seems to be the only method that works. This is what happens when you flash that dual recovery, or any recovery that has a boot image using "Fota". Probably explains why you can't get rid of it using "fastboot erase recovery". because it's erasing the wrong partition. Only flashing a full ftf gets rid of it, because the ftf has a new FotaKernel it flashes.
Eh, something like that. Will look at it this weekend.
Related
I'm not new to flashing custom roms and rooting Android devices, so I don't think I'm a noob at this. I decided to help my friend unleash the power in his HTC One S by rooting it and giving it a custom recovery, I went through the right processes, Unlocked the phone's bootloader, and flashed the superuser zip and the twrp image, as it didn't seem like a clockworkmod image was compatible with the phone.
I then booted into recovery, wiped/factory reset and then flashed the latest CM11 nightly and got an error in TWRP recovery about the bootloader not been interoperable something like "
Code:
2.15==2.13"
in the error message , fine, I rebooted back into fastboot and checked the HBOOT Version and found out the phone was on HBOOT 1.13 and I think CM11 requires the most recent HBOOT version to work on HTC devices. The phone has got S-Off though.
Now I'm stuck in a bootloop cause I already wiped the OS in TWRP, I have everything in place, the right drivers and all that, I also tried re-installing the stock rom by downloading an HTC One S's RUU file but the device wasn't recognized at all by the RUU installer, I also tried to flash a stock 4.0.x rom as a zip file, no Joy. Now the phone is stuck at the point where it doesn't have an OS to boot into at all.
I'll really appreciate the community's support helping me fix this issue.
geek-x said:
I'm not new to flashing custom roms and rooting Android devices, so I don't think I'm a noob at this. I decided to help my friend unleash the power in his HTC One S by rooting it and giving it a custom recovery, I went through the right processes, Unlocked the phone's bootloader, and flashed the superuser zip and the twrp image, as it didn't seem like a clockworkmod image was compatible with the phone.
I then booted into recovery, wiped/factory reset and then flashed the latest CM11 nightly and got an error in TWRP recovery about the bootloader not been interoperable something like "
Code:
2.15==2.13"
in the error message , fine, I rebooted back into fastboot and checked the HBOOT Version and found out the phone was on HBOOT 1.13 and I think CM11 requires the most recent HBOOT version to work on HTC devices. The phone has got S-Off though.
Now I'm stuck in a bootloop cause I already wiped the OS in TWRP, I have everything in place, the right drivers and all that, I also tried re-installing the stock rom by downloading an HTC One S's RUU file but the device wasn't recognized at all by the RUU installer, I also tried to flash a stock 4.0.x rom as a zip file, no Joy. Now the phone is stuck at the point where it doesn't have an OS to boot into at all.
I'll really appreciate the community's support helping me fix this issue.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2322755
You need that. Luckily you're already S-Off, so shouldn't be terrible to get going again. Just update the firmware, reinstall TWRP and re-flash CM11. Should be good to go afterwards.
es0tericcha0s said:
http://forum.xda-developers.com/showthread.php?t=2322755
You need that. Luckily you're already S-Off, so shouldn't be terrible to get going again. Just update the firmware, reinstall TWRP and re-flash CM11. Should be good to go afterwards.
Click to expand...
Click to collapse
Thank you so much for the reply, does it matter that I don't have an OS to boot into as I already wiped and factory reset the phone for installation of a new rom.?
geek-x said:
Thank you so much for the reply, does it matter that I don't have an OS to boot into as I already wiped and factory reset the phone for installation of a new rom.?
Click to expand...
Click to collapse
Nah, shouldn't. The firmware we're referring to here is independent of the OS.
es0tericcha0s said:
Nah, shouldn't. The firmware we're referring to here is independent of the OS.
Click to expand...
Click to collapse
At the end of the guide, should help fix the issue, there's a part where I'm supposed to install the new CM kernel from the CM .zip package, how do I flash a kernel from Fastboot?
geek-x said:
At the end of the guide, should help fix the issue, there's a part where I'm supposed to install the new CM kernel from the CM .zip package, how do I flash a kernel from Fastboot?
Click to expand...
Click to collapse
Since you are S-Off, needing fastboot to install the boot.img is not necessary. It will install through recovery.
But, for future reference, you would boot to the bootloader screen, select fastboot, then assuming you have fastboot set up on the PC and the boot.img in the directory of said fastboot, you would use this command:
fastboot flash boot boot.img
then
fastboot reboot
es0tericcha0s said:
Since you are S-Off, needing fastboot to install the boot.img is not necessary. It will install through recovery.
But, for future reference, you would boot to the bootloader screen, select fastboot, then assuming you have fastboot set up on the PC and the boot.img in the directory of said fastboot, you would use this command:
fastboot flash boot boot.img
then
fastboot reboot
Click to expand...
Click to collapse
I tried flashing the firmware.zip file from the thread but I got a FAILED: (remote: not allowed) error in command prompt at the end of the process, what did I do wrong?
UPDATE: I was able to update the bootloader version successfully, as I forgot the part where I was to boot into RUU mode with fastboot oem rebootRUU and worked perfectly the second time.
I rebooted and found out the boot loader was updated to HBoot 2.15, and I also updated twrp to the latest S4 version but now in recovery I get errors about twrp been unable to mount the /data partition. Do I flash another recovery image?
UPDATE:
Thank you so much es0tericcha0s, I really appreciate the support, I got the /data mount issue fixed finally. I just had to flash an older twrp recovery image and then reflashed the new one in fastboot and I could then flash CM successfully.
I can't believe I finally unbricked this phone, its been bricked since Sunday. Once again, es0tericcha0s, Thank you!
geek-x said:
UPDATE: I was able to update the bootloader version successfully, as I forgot the part where I was to boot into RUU mode with fastboot oem rebootRUU and worked perfectly the second time.
I rebooted and found out the boot loader was updated to HBoot 2.15, and I also updated twrp to the latest S4 version but now in recovery I get errors about twrp been unable to mount the /data partition. Do I flash another recovery image?
Click to expand...
Click to collapse
You might need to RUU back then. If you have issues with the RUU exe, then you can extract the rom.zip and install it like you did the firmware. There are quite a few tutorials on how to extract it, or there might already be a version floating around for your phone.
So I am stuck on TWRP 2.7.1.0 and i am running slimrom 4.4.4 on a c6833 and the reason for this is because it's the only thing that will boot on my phone. There was some intense trial and error a few months ago and a few days with a bricked phone but I finally got it running again, and I am nervous about messing things up again.
I am wanting to move to a more up to date ROM either scrubber port 5.1 or remix 5.1.1, but they both ask for updated TWRP to install. And I can't update TWRP using the TWRP tool from the store. It downloads but when it tries to install it says there is a problem. Previously, trying to update TWRP would result in SONY bootloops. I was about to try the dd method but just wanted to make sure it was safe.
I am a bit of an idiot (I got rid of my encrypted keys on day 2 of owning the phone) so any help would be appreciated.
Thanks!
walkingagh said:
...
Click to expand...
Click to collapse
The easiest way is to use Rashr. It should set everything up automatically. You may then reboot to recovery from the ROM, or by holding Vol- when the LED turns purple on boot-up.
If that doesn't work, for whatever reason, try dd or Flashtool. Using Flashtool, you can flash openrecovery-twrp-2.8.5.0-togari.img with the phone in Fastboot mode.
Let me know if you have any further questions!
Used Rashr...and now I can't get into recovery. I can still boot into my phone, but booting into recovery just fails with a yellow LED?
So Rashr still says I have 2.7.1.0 installed. :/
walkingagh said:
Used Rashr...and now I can't get into recovery. I can still boot into my phone, but booting into recovery just fails with a yellow LED?
Click to expand...
Click to collapse
Alright, you likely need a newer kernel first. Using Flashtool, you can flash this boot.img (newest AICP kernel) to the boot partition using the Fastboot mode (or use fastboot manually from the Flashtool/x10flasher_lib folder with "fastboot flash boot boot.img"). At this moment, you'll no longer be able to boot into the ROM, so make sure you've done all necessary backups and are ready to install a newer ROM. Then use Flashtool/Fastboot to flash the openrecovery-twrp-2.8.5.0-togari.img file to your recovery/FOTAKernel partition ("fastboot flash recovery openrecovery-twrp-2.8.5.0-togari.img"). You should be able to enter recovery now.
Awesome thanks! Will I need to do this each time I flash a ROM? Or can I just jump from something like scrubber to something else?
I know this is an old thread but is that the boot image I need to run TWRP 3? If so, can I do this via dd?
Triflot said:
Alright, you likely need a newer kernel first. Using Flashtool, you can flash this boot.img (newest AICP kernel) to the boot partition using the Fastboot mode (or use fastboot manually from the Flashtool/x10flasher_lib folder with "fastboot flash boot boot.img"). At this moment, you'll no longer be able to boot into the ROM, so make sure you've done all necessary backups and are ready to install a newer ROM. Then use Flashtool/Fastboot to flash the openrecovery-twrp-2.8.5.0-togari.img file to your recovery/FOTAKernel partition ("fastboot flash recovery openrecovery-twrp-2.8.5.0-togari.img"). You should be able to enter recovery now.
Click to expand...
Click to collapse
That file has expired, any chance you can re-post it?
Hi, i've had my Z2 two years now and I've rooted, UB and installed roms on it many times but for some reason I can't get into recovery anymore. I flashed a different ROM a few months ago to try get it back to stock but since then, no recovery!
I've flashed the TWRP 1 click installer (only seems to work on laptop, on PC I get waiting for device but it says it worked on laptop) but still I can't get into a recovery to flash a custom rom.
Any ideas? How do I get recovery back? Please be a bit simple with me, i've googled it and just get overwhelmed by the info so figure I should ask and find out what actually applies to me..
Thanks.
David
If you have flashed a stock rom, you probably have locked your bootloader, try this (hope you have done a TA backup the first time you unlocked the BL...):
Download the Androplus kernel in development section, unzip it.
Then, download and use flashtool (install the drivers if need them) to unlock your BL again (BLU button).
Once you have unlocked it, disconnect the phone from the computer BUT DON'T BOOT IT.
Close and reopen flashtool, and select fastboot mode from flashtool and use the kernel flash option.
Select the boot.img you have unzipped from androplus (change the file extension to .img), and your are done.
Disconnect, reboot and you will be able to access the TWRP recovery from the kernel when you see the led, then flash a stock based custom ROM (with recovery), or CM one, try to have one of them downloaded and placed into your ext-sdcard.
PLEASE! My English is not good enough to explain this in a better way, if you don't are familiar with flashtool, fastboot mode or you don't understand any of the steps, wait for a better explanation or read a lot about it BEFORE doing nothing.
PS. Your internal data probably will be lost, make a copy of all your photos, docs, etc. You can relock your BL if you choose a stock based custom rom like eXistenZ, just restoring your TA backup after flashing it.
have u try flash via adb fastboot? it's easier when u have UB, try erase it first, "fastboot erase recovery" then flash the img (the latest twrp img is available on their site) "fastboot flash recovery recovery.img"
No matter how I try to flash the TWRP recovery image to the recovery partition, TWRP gets replaced by the crappy stock recovery!! This is absolutely maddening!
Specifically, it seems that no matter what method to use to flash the TWRP recovery, it gets overriden by the stock loader when the phone reboots.
My bootloader is UNLOCKED and I've installed a custom rom just fine by using the command fastboot boot twrp.img to boot into the twrp image. This is the only way I'm able to use TWRP at all.
I've tried:
fastboot flash recovery twrp.img
Booting into TWRP, and flashing the image over the recovery partition
Flashify to flash the TWRP over the recovery partition from within the rom
Trying to flash cyangenmod's recovery from within the rom (was pretty desperate at this point..)
I've also tried many different versions of TWRP, I can boot into them just fine but none of them stick when I flash them to the recovery partition.
It always says it's successful when I try to flash it, I reboot into recovery, and it boots into the piece of crap EmUI stock recovery screen every time
Anyone have any pointers here? It's not the end of the world but it's pretty aggravating having a completely useless recovery if I'm not near a computer,.
Try using Flashify or Flashfire.
Sadly didn't work. It doesn't seem to matter how I flash the recovery, the bootloader replaces it with the stock recovery when it boots. I'll update the OP to clarify, but thank you
I am having same issue have you found a fix
Have you tried starting completely over? Like, downloading the official MM build (b331, C564D003) from Huawei (Assuming you're on L24)?
On the new, freshly installed ROM, make sure that USB Debugging is and enable OEM Unlock are on in the developer settings.
Then, try flashing this build of TWRP again.
Before rebooting, do a Cache/Dalvik Wipe.
Boot up into the stock rom, then use 'adb reboot recovery' to see what happens next. It should work...
Hi mate,
It'd be easier to help you if you could post a screenshot of your FASTBOOT screen. There will be a line that will say FRP=LOCKED/UNLOCKED something like this.
if it is locked,
you have to install stock rom & enable OEM unlock from setting.
Then relock the boot loader. Then again unlock the boot loader.
For myself, I unlocked my BL unofficially, & this problem occurred . I solved it this way...
Hope it helps.
Cheers!
Hi everyone,
I just replaced my home security panel into my old sgp311.
It is on stock 5.1.1, just rooted, with locked bootloader.
all things are just going fine and I'm finishing few very end steps, I made a wrong decision, which is install xposed without flashing zip file, I tried to copy/overwrite all the files from the ZIP to system and I thought if I simply make every files with right permission, I won't be messed up, yes I know it is not that easy.
Now I got a bootloop sgp311, I can put it into fastboot or download mode, I tried
Code:
fastboot boot twrp_various_versions.img,
hope it could boot into TWRP recovery and I can flash xposed ZIP and make it come back to earth again but, no.
Is there still a way?
Thanks.
Hak.
etann said:
Hi everyone,
I just replaced my home security panel into my old sgp311.
It is on stock 5.1.1, just rooted, with locked bootloader.
all things are just going fine and I'm finishing few very end steps, I made a wrong decision, which is install xposed without flashing zip file, I tried to copy/overwrite all the files from the ZIP to system and I thought if I simply make every files with right permission, I won't be messed up, yes I know it is not that easy.
Now I got a bootloop sgp311, I can put it into fastboot or download mode, I tried
Code:
fastboot boot twrp_various_versions.img,
hope it could boot into TWRP recovery and I can flash xposed ZIP and make it come back to earth again but, no.
Is there still a way?
Thanks.
Hak.
Click to expand...
Click to collapse
I think you have to reinstall everything from Flashtool (0.9.18.6) or restore with xperia-companion.
fastboot won't flash anything on a locked bootloader. It won't boot afterwards.
Rootk1t said:
I think you have to reinstall everything from Flashtool (0.9.18.6) or restore with xperia-companion.
fastboot won't flash anything on a locked bootloader. It won't boot afterwards.
Click to expand...
Click to collapse
Thank you.
I flashed with flashtool and leave checkbox "wipe userdata" blank, now seems everything but root is untouched.
Hak.