[Q] Can't boot/Odin won't work/No recovery - Galaxy S III Q&A, Help & Troubleshooting

Hi everyone, looking for some guidance here. Ive checked different solutions but I think I've got a unique combination of "dun goof'd"
History:
I have a Canadian (Bell) SGH-I747M that is rooted and was running the latest cyanogen.
Wanted to lend it to a friend who lost his job and needed a phone but he had a deal through rogers and my phone was locked to Bell.
I tried a few of the unlock code steps but I needed to be 4.1.2 or lower for it to work I heard so I tried installing 4.1.2 and thats where it went wrong. I did a firmware update to back it down and mid update it failed.
I can get it into download mode but not recovery. Letting it boot normally gives the message "Firmware upgrade encountered an issue. Please select recovery mode in Keys and try again" I don't think Keys works with cyanogen and even if it did, there is no serial # sticker behind the battery and since I can't boot into settings, I don't know the SN.
When I put it in download mode and try Odin using stockROMS.net oldest or newest image, Odin fails and the phone message is:
ODIN SW REV CHECK FAIL : Fused 2 > Binary 0
So long story short, any help is sincerely appreciated, my ideal state would be a working phone thats unlocked so my buddy can use it. IF that means an older OS, all good. Can I even fix this?? If you need more info I'll keep checking in... THANKS!

Report your own post and ask a moderator to move it to the i747 forum. Anything from this forum could hard brick it

boomboomer said:
Report your own post and ask a moderator to move it to the i747 forum. Anything from this forum could hard brick it
Click to expand...
Click to collapse
Understood - Can an Admin just delete it? I'll report it there.

Related

Galaxy S2 rooted and now problems - help!

Hello all,
If any of you pros can help me out with this I'll be eternally grateful.
So, I rooted my galaxy S2 with the guide on here and after superoneclick it just switched off. I booted it up and it just loops forever, yellow triangle then my provider (LGU+ Korea).
I can reboot into download mode and re-flash with XWKDD_insecure.tar. This starts the phone and I can access main features but it says rooted and I can't make any calls or 3g access.
As soon as countdown is up and screen locks (or I press lock) then the phone is bricked again and I have to re-flash just to get to that screen. So, I re-flashed and then ran the superoneclick program. Clicking unroot this time. It seemed to work and now I can get WIFI but no calls.
However, as soon as the screen is locked it is due a flash. Also, it's impossible to charge.
I'm new to this as you can tell but the guide is simple and I followed it step-by-step. I've read elsewhere on here that I can unroot this with a custom ROM? Where can I find these on the site?
Also, will they be applicable for me in Korea?
Basically I need to undo what I've done and get the phone reactivated. Please can somebody give me some advice and the download location of these ROMS that so I can get the phone reactivated.
Thanks in advance. Really stressing out here. It's on a rather expensive 2-year contract!
http://forum.xda-developers.com/showthread.php?t=1075278
Follow guide .
Flash with XWKDD to see if you can recover to a working phone ..
These are European firmwares .
jje
Thanks for your tip. Unfortunately I've tried that one and the other two all to no avail.
It just flashes until about 95% and then says 'FAIL!'.
Any other suggestions? or am I just going to have to go back to the shop and deal with the consequences.
hmmm havent heard of a fail flash, maybe try posting in the Dev thread
hmmm havent heard of a fail flash, maybe try posting in the Dev thread
Against the rules .
I would take to shop and say Kies offered an update and failed half way through .
A thought go to dev section find a kernel and just flash the kernel .
Post 2
http://forum.xda-developers.com/showthread.php?t=1056334
jje

[Q] Help rooted for wrong ota

Hi all,
Im new to the forum and did some searching but cant find the info i need. I tried rooting my verizon note 2 to casuals one click and didnt realize i had updated to android 4.3 prior. So it tried to root 4.1.2. Now my phone has the yellow triangle and says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I tried kies and kies 3 and neither one recognizes my phone.The only way to shut the phone off is to pull the battery.When i reinstall the battery i have a brief window to volume down+home+power and it takes me to odin. I saw this problem in the forums for roms but couldnt find anything on rooting.Please tell me i can fix this and go back to stock, and i didnt lock my phone up for good.I know im an idiot and i didnt back up anything. Ive learned my lesson and will do more research before attempting this again.I also realized there is no root for 4.3 yet. My phone was stock before i tried all this. Its the verizon sch-1605.Any help is much appreciated. Thank you!
gilitin99 said:
Hi all,
Im new to the forum and did some searching but cant find the info i need. I tried rooting my verizon note 2 to casuals one click and didnt realize i had updated to android 4.3 prior. So it tried to root 4.1.2. Now my phone has the yellow triangle and says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I tried kies and kies 3 and neither one recognizes my phone.The only way to shut the phone off is to pull the battery.When i reinstall the battery i have a brief window to volume down+home+power and it takes me to odin. I saw this problem in the forums for roms but couldnt find anything on rooting.Please tell me i can fix this and go back to stock, and i didnt lock my phone up for good.I know im an idiot and i didnt back up anything. Ive learned my lesson and will do more research before attempting this again.I also realized there is no root for 4.3 yet. My phone was stock before i tried all this. Its the verizon sch-1605.Any help is much appreciated. Thank you!
Click to expand...
Click to collapse
Couple of things:
- if you've received the 4.3 update, your bootloader is locked and (currently) un-touchable. Don't try to flash, well, anything.
- if you've received the 4.3 update, you've also received Samsung's odius KNOX technology. If you do try to flash anything most things (especially recoveries), you'll trip the KNOX counter and invalidate your warranty (I believe it also means you can't use your phone in enterprise setups that use KNOX)
The good news is that you can restore your phone to working order! You'll need to install the Verizon Software Upgrade Assistant. XDA member scoobysnack posted a link to download the software, though you can also get it from any functioning Verizon Samsung smartphone that's plugged into a computer.
After you've installed the software, turn your phone on and plug it into the computer. Run the software and select the tab on the left column titled 'Repair'. Click on the repair button near the right side and sit back & wait. The software will download the 4.3 OTA and install it. Like ODIN, it is imperative that you not unplug your phone during this process.
If you have trouble getting the software to recognize your phone, it may help to put it into download mode. I had to go through this myself (I foolishly forgot about the bootloader issue and tried to flash a recovery. Sigh).
You can achieve root for 4.3, but there are some serious concerns about Kingo, the software the provides root. XDA doesn't allow links to them due to unanswered questions about privacy concerns due to unusual traffic capture going between the software and (apparently) servers in China
thanks so much. ill try it in the morning when i get off work.
Also when i was in odin and plugged my phone in, the software on the pc didnt recognize my phone either. Is that something i should worry about. I guess the box was supposed to turn green but never did.Many thanks
ok so i got home today and tried downloading verizon software update from the link you gave and it wont open the program. Ive tried on 2 different computers. so i called verizon tech to see if they have it cause i can only find it on the website described eariler, and they said they dont have it. Its only in your phone. Well i cant access my phone to get it and im stumped. They said to go into a verizon store and they should be able to fix it. What are my options? I dont have any data on the phone i need to save so can i just go back to a previous version or wipe it out? Or do i have to do a custom rom? Thanks in advance.
gilitin99 said:
ok so i got home today and tried downloading verizon software update from the link you gave and it wont open the program. Ive tried on 2 different computers. so i called verizon tech to see if they have it cause i can only find it on the website described eariler, and they said they dont have it. Its only in your phone. Well i cant access my phone to get it and im stumped. They said to go into a verizon store and they should be able to fix it. What are my options? I dont have any data on the phone i need to save so can i just go back to a previous version or wipe it out? Or do i have to do a custom rom? Thanks in advance.
Click to expand...
Click to collapse
When you go into ODIN mode (turn off your phone, power on using POWER+HOME+VOL-DOWN), do you a line that reads 'KNOX WARRANTY VOID'? It would be in the upper left corner under 'SYSTEM STATUS'.
I ask because if you don't have that line, you didn't upgrade to 4.3 and your bootloader is NOT locked. You should be able to flash to 4.1.2 from ODIN and go from there (CASUAL to unlock & root, et cetera).
If you do have that line, then your only option is the VZW Software assistant. I'm uploading it now and I'll send you a link via PM. Please keep in mind that if you use the VZW Software assistant, whether your bootloader is currently locked or not, it most definitely will be locked after using it. If you're already locked, no harm done, but I'd make sure first.

[Q] Galaxy Note 2

Hello all,
A friend of mine has a galaxy note 2 from AT&T. I'm not clear as to what exactly he did but he says he had it unlocked and had custom firmware on his phone and the phone did an update on its own and locked up, but by looking up on the Internet all signs point to a soft brick. The phone only turns on and displays firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. My dumb as volunteered to help him as I thought how hard could this be? Anyway Kies failed to help. Secondly I followed the instructions on here as far as downloading Odin, downloaded stock firmware, downloaded Samsung drivers. I plug it in a all appears good in Odin. Mp5 file checks OK and once it starts running there is even a progress bar on the phone showing its downloading but once it gets to the end it fails every time. The screen on the phone displays
Odin Mode
Product name sgh-I317
Current Binary Samsung official
Current status: custom
Knox warranty void: 1
RP SWREV: A3
SW REV: invalid magic string
Any help would be appreciate I've almost had it with attempting to help. He apparently didn't know what he was doing now I obviously don't know what I'm doing.
Thatguycurt said:
Hello all,
A friend of mine has a galaxy note 2 from AT&T. I'm not clear as to what exactly he did but he says he had it unlocked and had custom firmware on his phone and the phone did an update on its own and locked up, but by looking up on the Internet all signs point to a soft brick. The phone only turns on and displays firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. My dumb as volunteered to help him as I thought how hard could this be? Anyway Kies failed to help. Secondly I followed the instructions on here as far as downloading Odin, downloaded stock firmware, downloaded Samsung drivers. I plug it in a all appears good in Odin. Mp5 file checks OK and once it starts running there is even a progress bar on the phone showing its downloading but once it gets to the end it fails every time. The screen on the phone displays
Odin Mode
Product name sgh-I317
Current Binary Samsung official
Current status: custom
Knox warranty void: 1
RP SWREV: A3
SW REV: invalid magic string
Any help would be appreciate I've almost had it with attempting to help. He apparently didn't know what he was doing now I obviously don't know what I'm doing.
Click to expand...
Click to collapse
Sounds like you are trying to install a version of the firmware that is older than the one that was on there. What is the build version that you are trying? What step is it failing at in Odin? I'd recommend getting the newest version of 4.4.2 to avoid the risk of trying to downgrade.
Odin fails right at the end. I see a green progress bar on the phone as well as on my pc screen. I'm at work right now so I'm not too sure as to exactly what or where it fails. What firmware do you recommend I attempt to place on it? Thanks for your reply also, I appreciate it.
Thatguycurt said:
Odin fails right at the end. I see a green progress bar on the phone as well as on my pc screen. I'm at work right now so I'm not too sure as to exactly what or where it fails. What firmware do you recommend I attempt to place on it? Thanks for your reply also, I appreciate it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal.../rom-att-i317-ucucne5-mj4-stock-odex-t2802189
es0tericcha0s said:
http://forum.xda-developers.com/gal.../rom-att-i317-ucucne5-mj4-stock-odex-t2802189
Click to expand...
Click to collapse
Which one do I pick?
Ok...update....
After using Odin to put this firmware on AT&T UCUCNE5 i317 Stock ODIN Note 2 the phone actually rebooted when finished and seemed like everything was normal. However it shows Samsung Keyboard has unfortunately stopped working every ten to fifteen seconds and will not stop. I tried clearing data and cache of the Samsung keyboard app and that did not work. I tried factory and data reset of the phone as well as wipe partition cache and none of that worked. Any suggestions?? I couldn't do anything so I
managed to use a Bluetooth keyboard to go to play store and download new keyboard app but I'm using my google account for that and I personally don't want him having my account on his phone.
I apologize for all the troubles, I'm trying to help him out and didn't realize I was in over my head with no experience on this.
Thatguycurt said:
Ok...update....
After using Odin to put this firmware on AT&T UCUCNE5 i317 Stock ODIN Note 2 the phone actually rebooted when finished and seemed like everything was normal. However it shows Samsung Keyboard has unfortunately stopped working every ten to fifteen seconds and will not stop. I tried clearing data and cache of the Samsung keyboard app and that did not work. I tried factory and data reset of the phone as well as wipe partition cache and none of that worked. Any suggestions?? I couldn't do anything so I
managed to use a Bluetooth keyboard to go to play store and download new keyboard app but I'm using my google account for that and I personally don't want him having my account on his phone.
I apologize for all the troubles, I'm trying to help him out and didn't realize I was in over my head with no experience on this.
Click to expand...
Click to collapse
You'll need to install a custom recovery, use that to wipe the system partition and data reset again then immediately reboot to Download Mode and reinstall the NE5 update.
You sir have been very helpful and I can't thank you enough. I was clueless coming into this thinking I could help my friend effortlessly but that was not the case. I've never had the intentions of rooting a phone or placing a custom mod on one but honestly now I'd like to try it lol!! With your help and this website I was able to fix his phone. I can't thank you guys enough. You're awesome!!!

[Q] EXTREME Galaxy S3 i535 Brick?!?

I was recently attempting to root my father's new Verizon Samsung Galaxy S3, when I encountered an extremely heart-dropping fail...
I have ran into an issue of being unable to enter ANY OS or ROM on the phone. I had a stock Android 4.4.4 ROM on the phone, which I rooted with no problem. I then attempted to install TWRP (I used TWRP Manager (Root)) in order to install SlimKat. However, at this point I encountered an error. I attempted to reboot the phone into recovery mode using the app, and encountered a screen saying "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verison Wireless store for help.". I get the same screen when trying to boot the phone without pressing any extra buttons. I also notice red words in the top-left corner of the screen saying "SECURE FAIL: KERNEL". The only other screen I can get to is the Odin Download Menu.
However, when I try to use Odin, I cannot get anything to flash to the phone except the PINs for the phone (it is an i535 Verison Galaxy S3). Anything else gives me an error, as shown in this image: www(dot)dropbox(dot)com/s/mc6srpy5vhpb9of/nand%20fail.bmp?dl=0
Basically, I am asking if anyone knows of a way to try to restore even just the stock ROM to the phone. As of right now, it is in an unusable condition and I would much prefer if I could fix my father's phone. I will try to give any new info as requested and I am willing to try almost anything to fix it.
P.S. I apologize for the URL issue :/ . I cannot post links yet xD
Wrong forum, read the sticky on American models.
boomboomer said:
Wrong forum, read the sticky on American models.
Click to expand...
Click to collapse
My apologies. I did not notice a secondary thread for my model, due the time at which I was posting. Is there a way to move this thread to the correct place or delete it from this forum? Also, is this the correct forum for me to be posting in: forum.xda-developers. com/galaxy-s3-verizon/help
Again, sorry about the URL inconvenience.

[GALAXY A11] FAIL ON SWITCHING CSC VIA ODIN

since their is no fourm for the galaxy a11 im posting here.
i tried to flash a FW with a different csc code than my original, and it said fail. i tried turning on my phone and i got the cyan screen telling me to put the phone into smart switch. i tried it and it didnt show up. i wasnt installing any root or custom rom, i just wanted to switch the FW so i could get android 11 on my phone but here we are. im new to flashing and stuff and i just soft bricked my main phone. my bootloader is locked but i had usb debugging enabled so please help me.
also XDA mods, dont take down my post because im posting in the wrong forum, there is no fourm for my device and i need urgent help.
the_oreo_cat said:
since their is no fourm for the galaxy a11 im posting here.
i tried to flash a FW with a different csc code than my original, and it said fail. i tried turning on my phone and i got the cyan screen telling me to put the phone into smart switch. i tried it and it didnt show up. i wasnt installing any root or custom rom, i just wanted to switch the FW so i could get android 11 on my phone but here we are. im new to flashing and stuff and i just soft bricked my main phone. my bootloader is locked but i had usb debugging enabled so please help me.
also XDA mods, dont take down my post because im posting in the wrong forum, there is no fourm for my device and i need urgent help.
Click to expand...
Click to collapse
You always can open a thread here https://forum.xda-developers.com/f/general-questions-and-answers.456/ the A11 is very different.
Firstly you have to get your device running again prior to attempt something like this, download the proper firmware for your device model (the latter that was running on it).
After that you could try to change the CSC through codes, it worked for me in a A10 https://forum.xda-developers.com/t/help-thread-ask-any-question-noob-friendly.2257421/post-86259085

Categories

Resources