Can any body tell how to load original stock i9100 ROM on i777. Thanks in advance please.
rkgarg2000 said:
Can any body tell how to load original stock i9100 ROM on i777. Thanks in advance please.
Click to expand...
Click to collapse
What do you mean by "original stock rom?". Are you talking about Gingerbread or do you simply want to flash an i9100 rom?
I mean 4.1.2 stock rom of 19100 by Samsung
SteveMurphy said:
What do you mean by "original stock rom?". Are you talking about Gingerbread or do you simply want to flash an i9100 rom?
Click to expand...
Click to collapse
I mean 4.1.2 stock rom of i9100 by Samsung
rkgarg2000 said:
I mean 4.1.2 stock rom of i9100 by Samsung
Click to expand...
Click to collapse
So a few questions:
- Are you currently rooted, and if so what firmware (rom) are you running?
- Why do you want a stock rom? This device has two 4.1.2 custom Samsung roms that are equal to/better than any i9100 rom!
I see in another thread you said you were on Neatrom, which is 4.1.2, and that you were having problems accessing recovery after updating SuperSU; are you still having those issues or are you able to get into recovery now? It's important to know, as it will change how you install the rom you're wanting. .
Related
hello, i bought a galaxy s2 used with 4.0.4, i want to downgrade to 4.0.3
the videocall dont work for me at 4.0.4
how can i downgrade without brick?
thanks
j12j34j said:
hello, i bought a galaxy s2 used with 4.0.4, i want to downgrade to 4.0.3
the videocall dont work for me at 4.0.4
how can i downgrade without brick?
thanks
Click to expand...
Click to collapse
choose the correct 4.0.3 stock rom and flash the same thro Odin
Flash through odin. I doesn't matter whether it is Gingerbread or ICS.
But do not use CWM to wipe. You will brick it.
Good luck!
sekhargreen said:
Flash through odin. I doesn't matter whether it is Gingerbread or ICS.
But do not use CWM to wipe. You will brick it.
Good luck!
Click to expand...
Click to collapse
Can I wipe safely after downgrade from bugged 4.0.4 to stock 4.0.3?
vojtas14 said:
Can I wipe safely after downgrade from bugged 4.0.4 to stock 4.0.3?
Click to expand...
Click to collapse
If you have successfully downgraded to 4.0.3, You are 100% safe and can therefore Wipe anything
vojtas14 said:
Can I wipe safely after downgrade from bugged 4.0.4 to stock 4.0.3?
Click to expand...
Click to collapse
After changing rom just flash Siyah kernel over any stock kernel, Its much better anyway.
TheATHEiST said:
After changing rom just flash Siyah kernel over any stock kernel, Its much better anyway.
Click to expand...
Click to collapse
I flashed Siyah over the stock kernel. Would it be safe to wipe in CWM now (using 4.0.4, XXLQ6)
coltsmild said:
I flashed Siyah over the stock kernel. Would it be safe to wipe in CWM now (using 4.0.4, XXLQ6)
Click to expand...
Click to collapse
If you are sure you have flashed Siyah kernel (Goto Settings - About to confirm), then you are now 100% safe. You can wipe anything uhh CWM recovery without any fear
Swyped from my Samsung Galaxy SII
Root M250s ICS 4.0.4
Hi I am using T Mobile Korean version of S2 with ICS 4.0.4. Please find attachment for further device info.
I really appreciate if any one could help me in rooting this particular version. I tried many ways no luck. Point out to the files to flash.
Thanks in advance
Hi
I want to try a GB ROM for some batt tests but I'm not too sure on something. (I currently have the ICS Alliance ROM 4.1& Siyah-s2-v5.0.1kernel)
Can i simply flash the GB modded ROM i have in CWM the normal way ? i ask cus i see some talk of needing bootloaders when downgrading ( i haven't a clue what a bootloader is)
Many Thx
Peace
nsandol the
Sun90 said:
choose the correct 4.0.3 stock rom and flash the same thro Odin
Click to expand...
Click to collapse
Bro how to download the correct 4,0.3. rom and odin? .
and if you can please advise me step by step Downgrade procedure..many thanks.
Problem SOLVED
I have just rooted my Galaxy S2 and flashed it with a custom rom.
My original phone info was
PDA: I9100XWLP3
PHONE: 19100O2ULP4
CSC I9100O2ULPR
Now after custom Rom when i check from settings
Baseband I9100XXLPR
KERNEL 3.0.15-SIYAH
BUILD NO IML74K.XWLP3
My questions are
1.what options I have in case I want to try other roms out there. Can I install Rom for 4.0.4...( I know thats dumb to ask. Its not possible just bear with me)
2. In case I can only Install 4.0.3 based Roms , has it to be LPR- LP3 strictly. or I can install other versions like Omega ROM XWLPG Android 4.03....LINK
http://forum.xda-developers.com/showthread.php?t=1489197..
3.Finally if I have to be very specific in choosing Roms what option do I have . I haven't came across almost any roms supporting LP3.
Help will be much appreciated
Regards
mann6004 said:
I have just rooted my Galaxy S2 and flashed it with a custom rom.
My original phone info was
PDA: I9100XWLP3
PHONE: 19100O2ULP4
CSC I9100O2ULPR
Now after custom Rom when i check from settings
Click to expand...
Click to collapse
which custom rom did u install after root?
mann6004 said:
I have just rooted my Galaxy S2 and flashed it with a custom rom.
My original phone info was
PDA: I9100XWLP3
PHONE: 19100O2ULP4
CSC I9100O2ULPR
Now after custom Rom when i check from settings
Click to expand...
Click to collapse
It seems that you haven't finished your post: "Now after custom Rom when i check from settings" .... and what? Did you fall asleep at that moment?
Sorry, just a joke
Sun90 said:
which custom rom did u install after root?
Click to expand...
Click to collapse
Simplistic Disaster by Mirkoddd-LegendK95
Many40 said:
It seems that you haven't finished your post: "Now after custom Rom when i check from settings" .... and what? Did you fall asleep at that moment?
Sorry, just a joke
Click to expand...
Click to collapse
:laugh: Thats fine. Just updated
aliendna99 said:
Click to expand...
Click to collapse
whats your baseband build
mann6004 said:
I have just rooted my Galaxy S2 and flashed it with a custom rom.
My original phone info was
PDA: I9100XWLP3
PHONE: 19100O2ULP4
CSC I9100O2ULPR
Now after custom Rom when i check from settings
Baseband I9100XXLPR
KERNEL 3.0.15-SIYAH
BUILD NO IML74K.XWLP3
My questions are
1.what options I have in case I want to try other roms out there. Can I install Rom for 4.0.4...( I know thats dumb to ask. Its not possible just bear with me)
2. In case I can only Install 4.0.3 based Roms , has it to be LPR- LP3 strictly. or I can install other versions like Omega ROM XWLPG Android 4.03....LINK
http://forum.xda-developers.com/showthread.php?t=1489197..
3.Finally if I have to be very specific in choosing Roms what option do I have . I haven't came across almost any roms supporting LP3.
Help will be much appreciated
Regards
Click to expand...
Click to collapse
1. Yes, you can. Install a 4.0.4 rom from CWM (if custom rom - zip file) or from ODIN (if stock rom - tar file)
2. You are not limited to 4.0.3 however if you like to stay on that you can flash any version including XWLPG (choose most suitable for).
3. You don't have to be specific.
There are however some basic rules to be followed:
- if you switch between different roms - full wipe is recommended to avoid any freezes, FCs etc
- if you move from 4.0.3 to stock 4.0.4 don't wipe anything just after flashing 4.0.4 rom due to possible brick bug. Imediately after flashing 4.0.4 stock rom flash one of the safe kernels (wihout wipes before) - eg. PhillZ-CWM6, Siyah, Dorimanx etc.
Many40 said:
1. Yes, you can. Install a 4.0.4 rom from CWM (if custom rom - zip file) or from ODIN (if stock rom - tar file)
2. You are not limited to 4.0.3 however if you like to stay on that you can flash any version including XWLPG (choose most suitable for).
3. You don't have to be specific.
There are however some basic rules to be followed:
- if you switch between different roms - full wipe is recommended to avoid any freezes, FCs etc
- if you move from 4.0.3 to stock 4.0.4 don't wipe anything just after flashing 4.0.4 rom due to possible brick bug. Imediately after flashing 4.0.4 stock rom flash one of the safe kernels (wihout wipes before) - eg. PhillZ-CWM6, Siyah, Dorimanx etc.
Click to expand...
Click to collapse
thanks much appreciated
Many40 said:
1. Yes, you can. Install a 4.0.4 rom from CWM (if custom rom - zip file) or from ODIN (if stock rom - tar file)
2. You are not limited to 4.0.3 however if you like to stay on that you can flash any version including XWLPG (choose most suitable for).
3. You don't have to be specific.
There are however some basic rules to be followed:
- if you switch between different roms - full wipe is recommended to avoid any freezes, FCs etc
- if you move from 4.0.3 to stock 4.0.4 don't wipe anything just after flashing 4.0.4 rom due to possible brick bug. Imediately after flashing 4.0.4 stock rom flash one of the safe kernels (wihout wipes before) - eg. PhillZ-CWM6, Siyah, Dorimanx etc.
Click to expand...
Click to collapse
Kindly answer these Q's
if i flash 4.0.4 custom rom , can i later revert back to 4.0.3 original firmware.. samsung has not yet released v4.0.4 for my model
secondly please explain the second rule you stated in your reply. I am really naive in this area
mann6004 said:
Kindly answer these Q's
if i flash 4.0.4 custom rom , can i later revert back to 4.0.3 original firmware.. samsung has not yet released v4.0.4 for my model
secondly please explain the second rule you stated in your reply. I am really naive in this area
Click to expand...
Click to collapse
Yes, after flashing a 4.0.4 based Custom Rom if u wish to rewert back to Stock ICS 4.0.3 u can always do so
regarding the second rule, if u wish to rewert back to stock ICS 4.0.3 firmware then u can select the latest availbale one's which r stable
Sun90 said:
Yes, after flashing a 4.0.4 based Custom Rom if u wish to rewert back to Stock ICS 4.0.3 u can always do so
regarding the second rule, if u wish to rewert back to stock ICS 4.0.3 firmware then u can select the latest availbale one's which r stable
Click to expand...
Click to collapse
Thanks my last inquiry
can I install JB 4.12 custom ROMS
mann6004 said:
Thanks my last inquiry
can I install JB 4.12 custom ROMS
Click to expand...
Click to collapse
Yes, u can ma8 remember once rooted u can install any custom rom of ur choice, but the only thing u have to ensure is that those roms are meant for ur model ie I9100 and u should follow the install instruction given by the devloper's of that rom to perfection
hello from down under in new Zealand......i want to rom my s2 its at present on ics rotted with latest chainfire root tool,
what id like to know is onced flashed etc do i have to flash the modem? im xxlpx ?
Is there any one in nz that has a stable rom on jb loaded and working fully?
any advice will be received with much delight thanx phil:victory:
xmanz said:
hello from down under in new Zealand......i want to rom my s2 its at present on ics rotted with latest chainfire root tool,
what id like to know is onced flashed etc do i have to flash the modem? im xxlpx ?
Is there any one in nz that has a stable rom on jb loaded and working fully?
any advice will be received with much delight thanx phil:victory:
Click to expand...
Click to collapse
First of all: it's 'rooted', not 'rotted'
Some roms come with a new modem, so if you want to change it, you can flash it through Recovery. Some others don't, but you can check it of course in Settings -> About phone.
About your request for a JB rom: even if you're from NZ, you still have to try them for yourself to see which rom perfectly matches your preferences.
Sent from the Matrix
thanx
Donnie Sins said:
First of all: it's 'rooted', not 'rotted'
Some roms come with a new modem, so if you want to change it, you can flash it through Recovery. Some others don't, but you can check it of course in Settings -> About phone.
About your request for a JB rom: even if you're from NZ, you still have to try them for yourself to see which rom perfectly matches your preferences.
Sent from the Matrix
Click to expand...
Click to collapse
ok thanx for info yes a small typo:laugh:
i wasnt really asking for whats best: but if if theres anything particular to nz phones s2 so atm i presume you can put any/rom/kernal on any s2? thanz again
xmanz said:
ok thanx for info yes a small typo:laugh:
i wasnt really asking for whats best: but if if theres anything particular to nz phones s2 so atm i presume you can put any/rom/kernal on any s2? thanz again
Click to expand...
Click to collapse
If you have an international i9100 you can flash any i9100 compatible rom
xmanz said:
hello from down under in new Zealand......i want to rom my s2 its at present on ics rotted with latest chainfire root tool,
what id like to know is onced flashed etc do i have to flash the modem? im xxlpx ?
Is there any one in nz that has a stable rom on jb loaded and working fully?
any advice will be received with much delight thanx phil:victory:
Click to expand...
Click to collapse
If you have a international sgs2, you might wanna try hellybean.com it's a stable Rom based on jelly bean 4.2.1 (Fully working )
Hey Guys,
I have a Samsung Galaxy S2 I9100G with Root and stock Rom, Kernel etc. Anything stock.
I want the Cyanogenmod version 10 at my phone can I use this Kernel? or these?
CyBeR54 said:
Hey Guys,
I have a Samsung Galaxy S2 I9100G with Root and stock Rom, Kernel etc. Anything stock.
I want the Cyanogenmod version 10 at my phone can I use this Kernel? or these?
Click to expand...
Click to collapse
What do you mean? Just flash CM...
yes just for flashing
CyBeR54 said:
Hey Guys,
I have a Samsung Galaxy S2 I9100G with Root and stock Rom, Kernel etc. Anything stock.
I want the Cyanogenmod version 10 at my phone can I use this Kernel? or these?
Click to expand...
Click to collapse
About the kernels you posted above, please read what the OP say in their threads:
"This is a kernel including ClockworkMod Recovery for use on Samsung roms.
Don't use this kernel on aosp based roms like CyanogenMod!!!"
Sent from my SGS II
Hello guy....
I have problem in upgrading my phone to Ics version or newer version of Android. After reading a few treads here about the hardbrick Im now afraid to flash Ics or higher to my Samsung galaxy s2.. I read that Ics 4.0.3 or lower are safe? is that true??
Please confirm me if it is true..
I already check my phone if it contain a faulty chip.. and yeah.. i have faulty chip and now Im stock to gingerbread Rom.
please tell me some safe Roms and safe steps in upgrading my phone to Ics. .. please
I don't want my phone to die.. please help me guy.. thankyou..
ebullube25 said:
Hello guy....
I have problem in upgrading my phone to Ics version or newer version of Android. After reading a few treads here about the hardbrick Im now afraid to flash Ics or higher to my Samsung galaxy s2.. I read that Ics 4.0.3 or lower are safe? is that true??
Please confirm me if it is true..
I already check my phone if it contain a faulty chip.. and yeah.. i have faulty chip and now Im stock to gingerbread Rom.
please tell me some safe Roms and safe steps in upgrading my phone to Ics. .. please
I don't want my phone to die.. please help me guy.. thankyou..
Click to expand...
Click to collapse
ICS is not really a very good rom and I would recommend KK or JB
you should be good if you go from a GB firmware to a JB one
or if u want you could flash a custom kernel in odin and then flash a KK ROM like CM11 or Slimkat
Toby0897 said:
ICS is not really a very good rom and I would recommend KK or JB
you should be good if you go from a GB firmware to a JB one
or if u want you could flash a custom kernel in odin and then flash a KK ROM like CM11 or Slimkat
Click to expand...
Click to collapse
thanks Toby
but is it safe to flash JB firmware, KK ROm and Slimkat in my phone? won't it harm my phone or lead to hardbrick?
can you give me some safe Rom that i can flash to my phone? or links?.
I'm searching but im afraid to use other ROm aside from GB.
thanks again Toby..
ebullube25 said:
thanks Toby
but is it safe to flash JB firmware, KK ROm and Slimkat in my phone?
can you give me some safe Rom that i can flash to my phone? or links?.
I'm searching but im afraid to use other ROm aside from GB.
thanks again Toby..
Click to expand...
Click to collapse
It`s very safe to flash Jellybean or Kitkat. Download the latest jellybean from sammobile and flash it with odin.. Look around for tutorials how to. Note that you will lose all your data, but your phone will 100% work. That brickbug was only on 4.0.4 version.. To be sure and safe flash jellybean and after that flash PhilZ-cwm6 - Safe Stock Based Kernel. If you need more info, i`ll help you. Cheers!:good:
corsicanu said:
It`s very safe to flash Jellybean or Kitkat. Download the latest jellybean from sammobile and flash it with odin.. Look around for tutorials how to. Note that you will lose all your data, but your phone will 100% work. That brickbug was only on 4.0.4 version.. To be sure and safe flash jellybean and after that flash PhilZ-cwm6 - Safe Stock Based Kernel. If you need more info, i`ll help you. Cheers!:good:
Click to expand...
Click to collapse
... only ICS 4.0.4 are know that has the emmc_erase_cap code within it? how about JB or KitKat they don't contain emmc_erase_cap codes? hehehe sorry i have so many question,. i just want to be sure and safe.. hehehe
umh do i really need the philz-cwm6-stock-kernel-cwm6-root-exfat? what does this app do?
amh.. did you try this JB Rom to a Samsung galaxy gt-i9100 that has a faulty chip?
thanks again corsicanu..