Hi, ad the title says i've bricked my player
I was on cm12 and tried to flash stock ROM from odin
I fkashed two times, the first one i got a bootloop, the second one the device got bricked :crying: , i can't do anything, it won't turno on or go into download mode :crying:
Please hekp me!
I've found a guide which tells about a program called unbrickble rezurrector, but i can't find the jar...
PLease help me i miss my player :crying: :crying:
Do you think that a USB jig will do the trick?
edoardog said:
Hi, ad the title says i've bricked my player
I was on cm12 and tried to flash stock ROM from odin
I fkashed two times, the first one i got a bootloop, the second one the device got bricked :crying: , i can't do anything, it won't turno on or go into download mode :crying:
Please hekp me!
I've found a guide which tells about a program called unbrickble rezurrector, but i can't find the jar...
PLease help me i miss my player :crying: :crying:
Click to expand...
Click to collapse
To power your device all the way off plug it in and hold power until the battery logo comes up.
Then unplug it and hold power, home, and volume down to boot into download mode.
Use odin (https://www.google.com/url?sa=t&rct...=ewT0JrvKAjyPbAfN2FyCTQ&bvm=bv.91071109,d.eXY) to flash the stock firmware form here:
http://forum.xda-developers.com/showthread.php?t=2192488
Androprise said:
To power your device all the way off plug it in and hold power until the battery logo comes up.
Then unplug it and hold power, home, and volume down to boot into download mode.
Use odin (https://www.google.com/url?sa=t&rct...=ewT0JrvKAjyPbAfN2FyCTQ&bvm=bv.91071109,d.eXY) to flash the stock firmware form here:
http://forum.xda-developers.com/showthread.php?t=2192488
Click to expand...
Click to collapse
hi, I've managed to make it boot into recovery by using unbrickable resurrector... now i've got another problem, I can't flash stock rom :crying:
I've followed adam outler guide to recover from a brick, but odin won't flash on the player! it just says SetupConnection..
<ID:0/004> Can't open the serial(COM) port! I can only make it go to download mode, and if I unplug it from the pc it shuts... I don't know what to do!
i don't think that the drivers are the problem, i can flash on my galaxy tab 3...
edoardog said:
hi, I've managed to make it boot into recovery by using unbrickable resurrector... now i've got another problem, I can't flash stock rom :crying:
I've followed adam outler guide to recover from a brick, but odin won't flash on the player! it just says SetupConnection..
<ID:0/004> Can't open the serial(COM) port! I can only make it go to download mode, and if I unplug it from the pc it shuts... I don't know what to do!
i don't think that the drivers are the problem, i can flash on my galaxy tab 3...
Click to expand...
Click to collapse
My player has sometimes had this problem with Odin 3.07. It has always worked fine with Odin 1.85 however. I have attached the Odin zip just extract it and run. If it still doesn't work try installing Samsung Kies (or re-install) to get the USB driver. Should that fail install the samsung mobile USB Driver (also attached).
Kies Link (Use Kies 2.6): http://www.samsung.com/us/kies/
Androprise said:
My player has sometimes had this problem with Odin 3.07. It has always worked fine with Odin 1.85 however. I have attached the Odin zip just extract it and run. If it still doesn't work try installing Samsung Kies (or re-install) to get the USB driver. Should that fail install the samsung mobile USB Driver (also attached).
Kies Link (Use Kies 2.6):
Click to expand...
Click to collapse
ok, thank you very much for your help
i managed to flash stockrom but the player won't turn on i don't know what happend
after it ends flashing it just shuts, it won't rebot... i don't know
edoardog said:
ok, thank you very much for your help
i managed to flash stockrom but the player won't turn on i don't know what happend
after it ends flashing it just shuts, it won't rebot... i don't know
Click to expand...
Click to collapse
I'm in a similar situation (bricked after cm12, no recovery, have let the battery die, gathering info on what to do next).
Here's a total guess, maybe the repartitioning for the cm12 is messing up the stock rom (did you have "repartition" checked in odin?) have you tried flashing cm11 or 12 instead of stock?
Also if this doesn't work try flashing with the pit file which can be found lower down on the same post as the stock ROMs.
TheRealBubba said:
I'm in a similar situation (bricked after cm12, no recovery, have let the battery die, gathering info on what to do next).
Here's a total guess, maybe the repartitioning for the cm12 is messing up the stock rom (did you have "repartition" checked in odin?) have you tried flashing cm11 or 12 instead of stock?
Click to expand...
Click to collapse
Hi, each time i flash in odin i check repartition and load the pit file...
how do I flash CM11 or CM12? I can't put it in recovery...
I think we are in the same situation, i was thinking... can't we make a CM11 or CM12 flashable tar file? i don't know if it's possibile, i'm a newbie and know only a little of android and similar OS...
uff, if the galaxy payer could only boot in recovery we could be able to flash one rom to fix it!
sorry for my bad english
edoardog said:
I think we are in the same situation, i was thinking... can't we make a CM11 or CM12 flashable tar file? i don't know if it's possibile, i'm a newbie and know only a little of android and similar OS...
uff, if the galaxy payer could only boot in recovery we could be able to flash one rom to fix it!
sorry for my bad english
Click to expand...
Click to collapse
I couldn't get mine into recovery either. I couldn't even get proper download mode. But, I used odin3 v1.85 (I also tried kies, and re-installing that may have installed drivers that turned out to be necessary, windows spent a lot of time searching for drivers... I'm a linux guy, I don't really understand how/why windows needs to spend 10 minutes searching for the same drivers again and again - whatever), and tried flashing lots of things, assorted pit files, roms and recoveries...
Eventually I managed to install a stock rom that I got from the first post in this thread:
http://forum.xda-developers.com/showthread.php?p=39188127
It installed correctly, but booted into an animation bootloop.
I cannot flash cwm on to it. When I boot into recovery I get the (stock?) android 3e recovery, and a screen full of red telling me that cache does not exist. None of the four options, reboot, install update zip from sd, wipe data/factory reset, wipe cache, do anything.
Stuck there now.
TheRealBubba said:
I couldn't get mine into recovery either. I couldn't even get proper download mode. But, I used odin3 v1.85 (I also tried kies, and re-installing that may have installed drivers that turned out to be necessary, windows spent a lot of time searching for drivers... I'm a linux guy, I don't really understand how/why windows needs to spend 10 minutes searching for the same drivers again and again - whatever), and tried flashing lots of things, assorted pit files, roms and recoveries...
Eventually I managed to install a stock rom that I got from the first post in this thread:
http://forum.xda-developers.com/showthread.php?p=39188127
It installed correctly, but booted into an animation bootloop.
I cannot flash cwm on to it. When I boot into recovery I get the (stock?) android 3e recovery, and a screen full of red telling me that cache does not exist. None of the four options, reboot, install update zip from sd, wipe data/factory reset, wipe cache, do anything.
Stuck there now.
Click to expand...
Click to collapse
I'm going to try to flash that, thank you for your respond... Windows can be relly slow in seraching driver, linux is a lot faster XD, yesterday i tried to flash my galaxy player from JODIN3, which is basically ODIN for LInux, the problem is, after it ends, it says SUCCESS!! but the player won't boot... Maybe the battery is dead this happens everytime I flash the pit and stock rom, ODIN says success but then it shuts, giving no life signs
This is a really strange problem even I tryed to flash everything (from kernels, to recovery, to stock roms and the bootloader which posted AdamOutler) we need to ask to an experienced dev what maybe has happend, ecause i relly have no idea
edoardog said:
I'm going to try to flash that, thank you for your respond... Windows can be relly slow in seraching driver, linux is a lot faster XD, yesterday i tried to flash my galaxy player from JODIN3, which is basically ODIN for LInux, the problem is, after it ends, it says SUCCESS!! but the player won't boot... Maybe the battery is dead this happens everytime I flash the pit and stock rom, ODIN says success but then it shuts, giving no life signs
This is a really strange problem even I tryed to flash everything (from kernels, to recovery, to stock roms and the bootloader which posted AdamOutler) we need to ask to an experienced dev what maybe has happend, ecause i relly have no idea
Click to expand...
Click to collapse
I'll look into JODIN3, messing around with Windows is so painfull. I would skip flashing the pit, just odin the one thing. I've also found that if odin fails flashing something, everything else I try flashing afterwards will fail. The only success I've had has been with disconnecting everything, plugging the device back into the PC, the starting odin new.
I've gotten a working gingerbread ROM, from here:
http://meticulus-development.com/index.php/galaxy-player-5-0-2/galaxy-player-5-0-stock-roms/
(irritating finding the download link among all the malware bull**** and "windows support" popups, it required registering for 4shared, but a throwaway email works)
The recovery is still a native samsung android 3e, and it took me a while to figure out that the "select" key wasn't the power button, but the home softkey... That might have been true of the last one I had flashed, the one that bootlooped, maybe I could have wiped... anyway. I've got a working gingerbread GP5.0 I can give my daughter (if I can avoid the temptation of putting cwm and then cm11 on it).
TheRealBubba said:
I'll look into JODIN3, messing around with Windows is so painfull. I would skip flashing the pit, just odin the one thing. I've also found that if odin fails flashing something, everything else I try flashing afterwards will fail. The only success I've had has been with disconnecting everything, plugging the device back into the PC, the starting odin new.
I've gotten a working gingerbread ROM, from here:
http://meticulus-development.com/index.php/galaxy-player-5-0-2/galaxy-player-5-0-stock-roms/
(irritating finding the download link among all the malware bull**** and "windows support" popups, it required registering for 4shared, but a throwaway email works)
The recovery is still a native samsung android 3e, and it took me a while to figure out that the "select" key wasn't the power button, but the home softkey... That might have been true of the last one I had flashed, the one that bootlooped, maybe I could have wiped... anyway. I've got a working gingerbread GP5.0 I can give my daughter (if I can avoid the temptation of putting cwm and then cm11 on it).
Click to expand...
Click to collapse
Thank you very much! I'll try and flash, I'm curious to see if this one works! downloading right naw!!
TheRealBubba said:
I'll look into JODIN3, messing around with Windows is so painfull. I would skip flashing the pit, just odin the one thing. I've also found that if odin fails flashing something, everything else I try flashing afterwards will fail. The only success I've had has been with disconnecting everything, plugging the device back into the PC, the starting odin new.
I've gotten a working gingerbread ROM, from here:
http://meticulus-development.com/index.php/galaxy-player-5-0-2/galaxy-player-5-0-stock-roms/
(irritating finding the download link among all the malware bull**** and "windows support" popups, it required registering for 4shared, but a throwaway email works)
The recovery is still a native samsung android 3e, and it took me a while to figure out that the "select" key wasn't the power button, but the home softkey... That might have been true of the last one I had flashed, the one that bootlooped, maybe I could have wiped... anyway. I've got a working gingerbread GP5.0 I can give my daughter (if I can avoid the temptation of putting cwm and then cm11 on it).
Click to expand...
Click to collapse
Actually it didn't work DDD: whatever thank you very much for trying helping me, I think I need to change the entire device XD, but i was thinking... maybe if I install the usa rom on my INTL do you think that it may work, i've read that it works but the home button won't be recognized... dunno
I'm gonna try, as we say in italy, rotto per rotto, I will try and install
edoardog said:
Actually it didn't work DDD: whatever thank you very much for trying helping me, I think I need to change the entire device XD, but i was thinking... maybe if I install the usa rom on my INTL do you think that it may work, i've read that it works but the home button won't be recognized... dunno
I'm gonna try, as we say in italy, rotto per rotto, I will try and install
Click to expand...
Click to collapse
Hmmm, I think the US/Intl might not be super important, since all you really want is to get a working recovery on there. I got one of those GB roms on, then was able to flash cwm. I don't think you need to be able to use the rom, but installing it make odin able to flash cwm. Once cwm was on I installed the cm11 xip and all is good.
Good luck with yours.
TheRealBubba said:
Hmmm, I think the US/Intl might not be super important, since all you really want is to get a working recovery on there. I got one of those GB roms on, then was able to flash cwm. I don't think you need to be able to use the rom, but installing it make odin able to flash cwm. Once cwm was on I installed the cm11 xip and all is good.
Good luck with yours.
Click to expand...
Click to collapse
I still have the same results, the player won't boot after finishing flashing... oh well, thank you very much for your help
Maybe i'll buy another one, it's a very cool device
TheRealBubba said:
I couldn't get mine into recovery either. I couldn't even get proper download mode. But, I used odin3 v1.85 (I also tried kies, and re-installing that may have installed drivers that turned out to be necessary, windows spent a lot of time searching for drivers... I'm a linux guy, I don't really understand how/why windows needs to spend 10 minutes searching for the same drivers again and again - whatever), and tried flashing lots of things, assorted pit files, roms and recoveries...
Eventually I managed to install a stock rom that I got from the first post in this thread:
http://forum.xda-developers.com/showthread.php?p=39188127
It installed correctly, but booted into an animation bootloop.
I cannot flash cwm on to it. When I boot into recovery I get the (stock?) android 3e recovery, and a screen full of red telling me that cache does not exist. None of the four options, reboot, install update zip from sd, wipe data/factory reset, wipe cache, do anything.
Stuck there now.
Click to expand...
Click to collapse
If the stock recovery is not working try flashing a CWM recovery for the GB ROMS.
For the Intl Player with the hardware button this one should work
http://forum.xda-developers.com/showthread.php?t=1414565
You need the Odin file to flash then recovery should work.
Do a cache wipe, factory data reset, and wipe the Dalvik cache.
Related
Hi Guys
New YP-G70 owner.. love it so far, but I have a few questions:
-Am I right in thinkiing I can do anything with it as i can with a SGS apart from make a phone call, such as mod it, flash it and custom it with EX Launcher, Cyanogen or anything from the Google Market.
- Does anyone know what the latest English language firmware. I found this on SamFirmware,
http://www.sammobile.com/firmware/?p...70&r=1#regiona
but the 2.3.6 are for italy and sweden, when i do a search for UK firmware, the latest one is 2.3.5.. XXKPF, which says France.. can anyone advise.
Thanks
In this thread u can find a file with the update:
http://forum.xda-developers.com/showthread.php?t=1559214&highlight=2+3+6
I booted up odin 1.85, installed the win 7 drivers, and tried to flash the rom, but its now stuck in download mode and it has no removable battery
How do i hard reset it.
Any advice
NightOrchid said:
I booted up odin 1.85, installed the win 7 drivers, and tried to flash the rom, but its now stuck in download mode and it has no removable battery
How do i hard reset it.
Any advice
Click to expand...
Click to collapse
Hold the power button until it restarts.
Sent using Tapatalk
klin1344 said:
Hold the power button until it restarts.
Sent using Tapatalk
Click to expand...
Click to collapse
Yeah, i did that.. it now shows me a mini phone, a computer with an orange triangle in the middle of them and pressing the power button just resets to that but it does detect it in windows and odin, it just stops with "ID3 Connection" when i try to flash 236
Ive just got this today.. can anyone help..please
Is it Bricked?. Will leaving it on to drain the battery help?.
Also, is there a recovery file for it. My version is a YP-G70CW, which i believe is the international version.
Any advice
you need to find the stock ROM & use ODIN to install via download mode. All the info you need are in these forums, I did a search for your model & stock rom I got this. Or search the dev forums.
http://forum.xda-developers.com/showthread.php?t=1574207
RMXO said:
you need to find the stock ROM & use ODIN to install via download mode. All the info you need are in these forums, I did a search for your model & stock rom I got this. Or search the dev forums.
http://forum.xda-developers.com/showthread.php?t=1574207
Click to expand...
Click to collapse
It wont go into download mode.. Its stuck on a black screen with a small phone, a small computer and an orange caution triangle inbetween the 2, but it is detected in odin, I get the yellow com3 port up and ID:3 Added, in the main window. When I start it begins the download, but gets stuck at "ID:3 setupconnection
Any advice or am i missing something here
NightOrchid said:
It wont go into download mode.. Its stuck on a black screen with a small phone, a small computer and an orange caution triangle inbetween the 2, but it is detected in odin, I get the yellow com3 port up and ID:3 Added, in the main window. When I start it begins the download, but gets stuck at "ID:3 setupconnection
Any advice or am i missing something here
Click to expand...
Click to collapse
That is download mode. You messed up slightly bad to get that as download mode. which file are you using in ODIN & which option are you using? as in, pitt, pda, etc....
RMXO said:
That is download mode. You messed up slightly bad to get that as download mode. which file are you using in ODIN & which option are you using? as in, pitt, pda, etc....
Click to expand...
Click to collapse
I didnt use a .pit file, I just used the XXKPH file in PDA here:
http://forum.xda-developers.com/showthread.php?t=1574207
then clicked start and it failed, now its just sitting there as mentioned, but i have downloaded the 8gig international..235.pit file, i just havent done anything yet.
What should i do next?
Ok, had a dig around and I need to flash a kernel as well as the KPH file.
http://forum.xda-developers.com/showthread.php?t=1574207
Is there a kernel available for stock KPH and do i need to use the .pit.
Thanks
Thank god.. Its Done.. Yep, its fixed through hard work, reading around, following advice given and much diligence. In the download mode I mentioned, I flashed using rjs Kernel which got it bootlooping, then flashed KPF in ODIN.. had to flash KPF twice, wiped Cache part > Dalvik Cache, fact. reset and reboot.. all done.
Because this has a built in battery, ill not be doing this again through odin.. ill use KIES, even if i have to wait 3 months for the release.
Its now 4.30am and im off to bed.
Thanks
Update... Im now on KPH236
Some questions about that flash:
When the flashing failed and i held holding the power button down for 10 seconds, thats when it booted into the other download mode (phone, triangle, PC), so would i be right in thinking this works like flashing a SGS and what bricks it would be:
- Installing US firmware on my EU player.
- Installing bootloaders for no reason or anything rom-wise from a SGS
- pulling the USB cable out when flashing OR closing down ODIN.
- Geting impatient and pressing/holding down buttons when still in download mode or flashing.
A few other questions:
- Is there anything else that I could do to protect it against a brick.
- As this is not a phone, can I go back to 235 if i want, just use ODIN with XXKPF 235 in PDA.
- If i do go back, Will I have to replace rjs kernel first with stock KPF kernel, then flash KPF ROM or can i just flash the rom and it will overwrite rjs.
- Googles search by voice doesnt work unless its wifi'd, as in finding something in the player like a song, a memo or contacts name, it just "connection problem" .. Is that normal, yet runs fine with wifi on.
The reason Im asking is because Kies keeps telling me there is a connection problem when i plug it in and it wont detect it.. Is this due to rjs kernel or is there another issue, just to put my mind at rest.
Thanks
NightOrchid said:
Update... Im now on KPH236
Some questions about that flash:
When the flashing failed and i held holding the power button down for 10 seconds, thats when it booted into the other download mode (phone, triangle, PC), so would i be right in thinking this works like flashing a SGS and what bricks it would be:
- Installing US firmware on my EU player.
- Installing bootloaders for no reason or anything rom-wise from a SGS
- pulling the USB cable out when flashing OR closing down ODIN.
- Geting impatient and pressing/holding down buttons when still in download mode or flashing.
A few other questions:
- Is there anything else that I could do to protect it against a brick.
- As this is not a phone, can I go back to 235 if i want, just use ODIN with XXKPF 235 in PDA.
- If i do go back, Will I have to replace rjs kernel first with stock KPF kernel, then flash KPF ROM or can i just flash the rom and it will overwrite rjs.
- Googles search by voice doesnt work unless its wifi'd, as in finding something in the player like a song, a memo or contacts name, it just "connection problem" .. Is that normal, yet runs fine with wifi on.
The reason Im asking is because Kies keeps telling me there is a connection problem when i plug it in and it wont detect it.. Is this due to rjs kernel or is there another issue, just to put my mind at rest.
Thanks
Click to expand...
Click to collapse
I will be extra cautious if a ROM has zImage (kernel) and/or bootloader in it. The consequence of a corrupted bootloader is obvious. A corrupted kernel can be problematic because the recovery mode comes with the kernel. If you messed up the kernel, you will loss your recovery mode as well.
Actually I hope more developers will publish their ROM in CWM flashable zip rather than Odin image. Since Odin basically dump the disk image to your device, any mistakes in the process will likely corrupt your device's partitions. In contrast, CWM flashing uses high level operations like file delete and copy to install the ROM (in most cases). It is much less risky than using Odin (if the developer knows what he is doing). Just my 2 cents.
So if i delete the "zimage" in a ROM and flash it, it will only flash the ROM? Also how do i know if it has bootloaders included?
Forgot to quote you but.... Cheers WT Ho, youve put my mind at rest and Im quite happy, that after my problems above, its not the player... rjs is nice and stable and boots really fast, so Im staying on KPH 236 and gonna upgrade through ODIN, not downgrade to KPF.. Have found the issues are with Kies not the kernel being recognised, alot of posts about Kies issues on various sites and forums. SamFirmware.com is my friend.. .
- Googles search by voice doesnt work unless its wifi'd, as in finding something in the player like a song, a memo or contacts name, it just "connection problem" .. Is that normal, yet runs fine with wifi on...
Yes you need a connection, heres why:
http://forum.openetna.com/index.php?topic=537.0
Cheers
Chris4evernoob said:
So if i delete the "zimage" in a ROM and flash it, it will only flash the ROM? Also how do i know if it has bootloaders included?
Click to expand...
Click to collapse
You can open an Odin ROM easily by using 7-zip. If it has md5, you will encounter a warning but that's fine.
For full ROM, you will see
boot.bin
cache.rfs
dbdata.rfs
factoryfs.rfs
param.lfs
Sbl.bin
zImage
Basically most custom ROMs will modify your factoryfs.rfs only. If you need a new kernel, zImage is also needed. All other files are related to boot or data partition (usually not needed). Therefore many ROMs only have zImage and factoryfs.rfs in them.
Although I haven't tried that myself, I think it is possible to just put the factoryfs.rfs in the tar file. That will be similar to the Odin package of rj's kernel, you will only see the zImage in the tar file.
I recently updated my phone from 2.3.3 to Cyanogenmod 7.1 I believe and went to overclock the phone, Unfortunately, I overclocked it too much and now it is stuck in an endless loop on the boot screen..
Phone is obviously a Galaxy Ace, Network carrier is Vodafone UK.
I have been trying for the last two hours to look for answer's on how to fix this and I haven't found anything, So I thought the best idea was to come to here.. Any help would be appreciated, I have also tried to install other ROM's on to the phone to correct it but it look's like the CPU is still at the overclocked setting and because of that, Won't boot up.
thanks.
Dan.
go to recovery and wipe data+cache and try to boot..
if still no luck --> ODIN
madman_amit said:
go to recovery and wipe data+cache and try to boot..
if still no luck --> ODIN
Click to expand...
Click to collapse
I tried wiping everything before but will give ODIN a try. Thank you. I really like the phone and am trying my best to get it working again. lol
So, I downloaded ODIN and I have absolutely no idea what I am doing.. I don't want to risk breaking the phone anymore.. The only tut on how to use ODIN is for the Galaxy 3..
I have never done anything like this before so it's all new to me.. :/
Ok, I used ODIN and I have the original ROM that came with the phone, But still in an endless loop on the Samsung boot screen.. :/ I am totally stuck now.. I have tried all I know to get it to work
I managed to sort the problem, the "One Package" on ODIN didn't work, Luckily I had the 4 seperate files needed on my laptop, So all is workign now.
Th3GrimRipp3r said:
I managed to sort the problem, the "One Package" on ODIN didn't work, Luckily I had the 4 seperate files needed on my laptop, So all is workign now.
Click to expand...
Click to collapse
Excellent work having a backup on your laptop. First thing now do a full backup on your phone before you think about further experiment. If overclocking make sure "set at boot" is not ticked. Finally read up a little on xda before you do anything - a good place to start is "Tutorial" on top of dev section and the "q & a " thread here.
I hope this works for You.
You've a one packege STOCK Rom?
so open ODIN 4.38
Untick Reset Time
Choose your one package file.
choose OPS; attatched here.
press start.
to sum up: you have this ticked only:One package, auto reboot, protect OPS
if doesnot work go to recovery and try factory reset& cache wipe.
if doesnot work, try flshing CWM and install any backed up rom, if you want one. just PM and i will upload backed up stock rom.
I really hope it helps because I got the same issue after flshing a stock from ODIN, but been removed from wipe data& factory reset.
_________________________________________________
If I've helped you in any way, Press THANKS
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Hi Marcus,
I had the same problem few days back.
If it's not broken by you trying something fancy, the best solution is to take it to service centre. If you have rooted your device, had installed some custom firmware or are not willing to visit the service centre for some other reason, please read ahead.
All I did was,
Installed USB connectivity drivers through Kies.
Installed ODIN 1.83
Ensured that Kies or any of its processes are not running in background.
Downloaded the official SGS2 firmware
Flashed the firmware through ODIN.
It took around 10 minutes for the full process and I was having my mobile up and running. Using ODIN sounds scary initially if you haven't used it. I have slowly started gaining confidence in it after using it a few times.
Please note that though the process is well proven to be safe, there is still an amount of risk involved.
Sent from my GT-I9100
Download a siyah kernel(like v4.0.1) .tar file and flash through odin.
See if that makes it boot/lets you into recovery.
Adarzannh said:
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
I appreciate all of your answers!
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
<ID:0/003> NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
mananbdesai: where do I find the "official SGS2 firmware"?
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
marlu873 said:
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
Click to expand...
Click to collapse
A couple of things..ensure KIES is not running on your computer in the background. If possible delete it completely. Also ensure your phone is connected to a USB port directly on the computer and not via a hub or to a USB port on a keyboard or something. Odin is a finicky s/w..so..
Also, try different versions. If v1.85 doesn't work try v3.4
marlu873 said:
mananbdesai: where do I find the "official SGS2 firmware"?
Click to expand...
Click to collapse
Go to sammobile.com or a sticky in the Original Android Development section here..has links to all the stock firmwares.
marlu873 said:
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
Click to expand...
Click to collapse
Lol at underlining. if you flash a custom kernel like siyah, you'll be rooted and get CWM. Using that you can install a custom ROM.
Sent from my GT-I9100 using xda app-developers app
And youll be safe from the 4.0.4 brickbug if you flash siyah.
You flash a kernel for various reasons like it has emmc cap disabled,you can tweak it etc.
You can flash siyah kernel and stop there.Or you can move onto a custom rom.
Whatever,when its done-backup your efs and make a nand backup.
And yesterday I was downgrading my wifes phone onto 4.0.3.I was using odin and kept getting "failed".After 3 attempts I realised I hadnt put the phone into download mode..........how stupids that......lol
hi there, just wondering, after Flashing the stock firmware through ODIN, do you lose everything in your phone? i need to get all the notes that I have in my phone (notes from the samsung stock apps). I dont have any external sd card in the phone. thanks in advance for the reply.
enquiry
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Hi there sir,
Has the problem solved ? Care to share the solution ?
Thanks.
i had the same exact problem, i tried flashing with odin n stock firmware but stuck in NAND write start, i didnt try flashing with PIT & repartition though, i couldnt be bothered anymore, so i took it to samsung service plaza, they told me the problem is in the main PCB (hardware issue), so all they did was replace that n it got fixed! i didnt pay because it's still under contract/ carrier warranty
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
it seems for some strange reason the phone wont turn on now. Wheni plug it in i get the blue flashing dot but its faint. Tried download mode and nothing.
same problem
araz.rozh said:
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
my phone is stuck at the bootlogo too. but mine is rooted n running on biftor rom (jellybean) pls how do i flash with odin? thanks
help pls.
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
tatchero said:
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
Click to expand...
Click to collapse
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Flash-IS-Bright said:
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Click to expand...
Click to collapse
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
peshmann said:
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
Click to expand...
Click to collapse
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Sun90 said:
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Click to expand...
Click to collapse
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
peshmann said:
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
Click to expand...
Click to collapse
You could try flashing hawkerpaul's kernel wiper first and then install another stock kernel like PhilZ or Apollo, and see if that helps.
Neat Rom lite,suddenly struck in boot loop after 1 month of operation.
Dear All,
I have installed the "I9100XWLSZ_NeatROM_Lite_v5.0.1" custom rom and after 1 month of successful usage, today suddenly the phone was dead.(probably due to autoupdates over wifi) . I tried to reboot, but didnt. Tried to restart but got stuck in the logo screen with yellow triangle.
Tried to enter recovery mode, but no use. Only download mode is possible.
Tried to flash the stock rom using odin, but no use, Nand write failed.
Can somebody help me how to come out of this situation. Shall I install a different kernal and see?
Regards,
Maka11
Hi Guys,
Sorry to bother you with this, but I'm out of ideas...
I decided to root my i9100 using this guide9.
As I was doing this, the recovery rom would reboot when using the volume buttons to navigate (only on the first "page") - This was easily worked around by using the touchscreen, but now I'm wondering if this was the start of my issues...
I applied the SU busy box installer, and got root. I installed rom manager, and noticed that it seemed to lock up when doing certain things. I put this down to CWM saying there was no official mod for the i9100.
The next day I decided to try and install a CM10.1 nightly, so I took a backup, wiped cache and data, and applied the rom and gapps.
When I rebooted, the phone wouldn't finished booting, it just sat at the initial logo screen.
After that, I tried following this recovery guide but the odin flash failed at around 80% (I retried and the same happened again).
Since then I've had difficulty getting in to recovery mode. I've tried flashing various stock roms with odin, and trying to restore with Kies.
In Kies I get as far as it conencting to the phone in download mode, but it pops up a "notice" in a foreign language - presumably Korean (and I can't copy the text to even attempt a google translation).
I tried flashing Siyah-s2-v5.0.1 to get a different recovery - that seemed to have a garbled progress bar, before hanging when I tried to wipe /data again.
When I use odin to flash a stock rom - is it supposed to restore absolutely everything? I'm not sure how I'm still getting problems if this is the case. Any ideas on what to try next?
(The current stock rom I'm try ing to use is this one)
Let me know if I'm missing any info, and thanks in advance for any help.
Using rom manager would have been the start of your problems-not the temp cwm recovery in the rooting guide.
If you can boot into download mode then I would download LP7 stock rom, disable kies and flash that with Odin.
{go back to your iphone since you are an android noob}
Thanks for the reply.
Rom manager didn't work properly for me, so I stopped using it. I used the temp cwm recovery to install the CM nightly.
I can boot in to download mode, but I've already tried an LP7 rom, - as with the others, it doesn't boot.
Any ideas on how to tell why it isn't booting? logcat doesn't seem to want to to work. Not sure if it's broken / too early in the boot process / etc
Silly Billy said:
Thanks for the reply.
Rom manager didn't work properly for me, so I stopped using it. I used the temp cwm recovery to install the CM nightly.
I can boot in to download mode, but I've already tried an LP7 rom, - as with the others, it doesn't boot.
Any ideas on how to tell why it isn't booting? logcat doesn't seem to want to to work. Not sure if it's broken / too early in the boot process / etc
Click to expand...
Click to collapse
I9100 right?
Try this:
- Download this ROM.
- Kies installed? uninstall it, re install it. Close it all up with Task manager (3 or 4 applications running).
- Flash ROM via Odin (CSC, MODEM, PHONE).
- If that doesn't fly, try another usb port & usb cable. Another PC would also be recommended.
- Repeat the process.
- Still no luck? try flashing a previous siyah version.
- No go? repeat all the above.
- Let us know how you did.
gastonw;37017081- Download this ROM.[/QUOTE said:
Thanks, I'll give it a go. (Will take a while for the file to download from hotfile...).
Are odin images for stock roms supposed to restore the stock recovery, or do they leave that alone?
Click to expand...
Click to collapse
As a matter of interest, how far did you go with Phistachios repair guide.
{go back to your iphone since you are an android noob}
Silly Billy said:
Thanks, I'll give it a go. (Will take a while for the file to download from hotfile...).
Are odin images for stock roms supposed to restore the stock recovery, or do they leave that alone?
Click to expand...
Click to collapse
Focus on getting a ROM to boot.
That ROM will install stock recovery.
gastonw said:
Let us know how you did.
Click to expand...
Click to collapse
For some reason, I can't get Odin to flash that rom - it just hands for a while at the start of data.img, before saying "Complete(Write) operation failed."
There a .pit file in the archive, although the link says not to repartition (so I didn't).
Some roms seem to get written, some don't, I'm not sure why...
theunderling said:
As a matter of interest, how far did you go with Phistachios repair guide.
Click to expand...
Click to collapse
Odin failed about 80% through flashing (step 4, after taking the ICS steps). I tried flashing the kernel afterwards, which flashed, but didn't help with my boot issues.
gastonw said:
Focus on getting a ROM to boot.
That ROM will install stock recovery.
Click to expand...
Click to collapse
Of course, I was just trying to get a better understanding of how things work - I'd settle for anything booting right now.
I was meaning how far did you go with his guide.He says (near the end) to flash a bootloader/kernel/rom.
You can try everything in his guide, but understand about the risks involved with pit and bootloaders.
{go back to your iphone since you are an android noob}
theunderling said:
I was meaning how far did you go with his guide.He says (near the end) to flash a bootloader/kernel/rom.
You can try everything in his guide, but understand about the risks involved with pit and bootloaders.
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse
He's right.
Keep trying, consider pit files & bootloaders as a last resort.
Tried everything?
Used another usb cable for the flash? tried in another PC? tried in a laptop?
Are you sure kies is all shut down?
I've read about so many people having the same issue than you, they keep on flashing as in trial & error and most times they come out winners.
GL!
gastonw said:
He's right.
Keep trying, consider pit files & bootloaders as a last resort.
Tried everything?
Used another usb cable for the flash? tried in another PC? tried in a laptop?
Are you sure kies is all shut down?
I've read about so many people having the same issue than you, they keep on flashing as in trial & error and most times they come out winners.
GL!
Click to expand...
Click to collapse
I guess I'll keep at it then.
I'd tried another cable with kies shut down. Just tried a different machine, and flashed the ROM you suggested with heimdall. It flashed without complaining (unlike odin), but I'm still getting a boot loop.
Looking at the initial recovery guide I was following - I suspect that I might've flashed the bootloader (the guide shows in bold which file goes in which box, so I probably loaded them all). Maybe this is the source of my troubles...
I also noticed that heimdall can pull data from the phone too - if I can pull and mount these, am I likely to find any useful log files?
For completeness (and anyone else who finds themselves with the same issue): It seems I hit the EMMC brick bug, which rendered some of my EMMC storage unusable.
This helpful chap came up with a workaround to partition around the dead space. (Please read the post carefully and make sure this really is your problem before flashing!)
That method will let you know what part of your memory is corrupted. It's done via recovery as far as I remember.
Did you bring your device back to life?
Sent from the little guy
gastonw said:
That method will let you know what part of your memory is corrupted. It's done via recovery as far as I remember.
Did you bring your device back to life?
Click to expand...
Click to collapse
Yes, that's right. IIRC, I flashed a working recovery with Odin, then did most of the work from adb shell.
I got my device back to life for the most part. I get the occasional hang but haven't investigated much (have since bought a Nexus 4, so not using the S2 so much).
Just thought I'd share for the next poor soul who has the same problem
So I've been running CM nightlies for almost an entire year and last night was updating to Jamie's latest nightly (P13 for those of you following his thread) and I stupidly cleared my System data before flashing P13 (I know, dumb...i was really tired when I did this). My phone won't boot at all, it just gets to the Samsung logo and goes black. I can only boot into Download mode, so I figured I would flash the stock ROM onto it. I downloaded the '.zip' from samfirmware.com and repackaged it as a .tar using 7zip but Odin keeps giving me a 'Complete(write) operation failed.' error. Before this, I also tried to flash P13 using Odin and Odin would just crash on me.
I'm no expert with this stuff and I've been looking around forums and have been reading stuff on re-partitioning using PIT files but I'd rather get someones advice on what I should do rather than just assume and screw my phone anymore.
Any help would be greatly appreciated, thanks in advance!
Look in one of the stickies for teh files you can use in odin that should run fine.
shuka325 said:
You should still be able to get into recovery. Place a zip on your sd card and flash through recovery.
Click to expand...
Click to collapse
I haven't been able to get into recovery since I updated to CM10.1, whenever I hold down the recovery buttons it just keeps pulsing the vibrate over and over again.
RESOLVED!!!
nahcb said:
I haven't been able to get into recovery since I updated to CM10.1, whenever I hold down the recovery buttons it just keeps pulsing the vibrate over and over again.
Click to expand...
Click to collapse
Problem is resolved!! Dunno why or how, but just kept trying to re-flash TWRP and it eventually worked, just successfully flashed CM10.1 nightly and gapps and everything is back to good!
If you find yourself in a similar situation in the future, I just wrote up a guide to trouble shoot Odin when it does this.
Instead of just blindly trying the same thing over and over hoping it'll "just work" again.
http://forum.xda-developers.com/showthread.php?t=2240096