Hi everyone, i hope to find a solution writing there, since i'm kinda desperate about my situation.
So, i got this telephone, a s2 I9100g, but only the day after i noticed the browser was in chinese. Looked up a bit better inside and i found it is a chinese version of the telephone (original one, but made for chinese market).
So i tryed to pull in an original rom, but it failed; i found a guide to how to fix this problem, and become able to flash the italian rom on it.
Basically, i followed this guide http://forum.xda-developers.com/showthread.php?t=1702479%22 I did all the steps using the CHN version of the bootloader and.. i know, i was so stupid there, but since it got stuck at NAND writing (i did not see the progress bar after 15 minutes), i simply unplugged the cable.
Well, after that the phone didn't enter reset/download mode, but it started showing the yellow phone---!---pc screen, with wrote above "software update fail", and something else in chinese.
There is what i tryed to do:
-Flash another rom (tryed 2) with different versions of odin, 1.3,1.6 and 3.07.
odin does recognize the telephone with the drivers installed, but if i start it, it gets stuck at setup connecting phase and failing after. Same with all versions.
-use OneClickUnbrick, i tryed to start it normally and from CMD.
with the drivers which odin and windows use to recognize the telephone (last ones available on samsung website), it says "usb drivers are not properly installed attempting to install drivers". So, it starts Zadig. I follow the steps there, and the installation completes succesfully. But at this point, when i plug in the telephone windows recognizes it but fails installing the device with drivers, and odin doesn't recognize it at all, while oneclick keeps showing the "usb drivers are not properly installed" window, time after time even if i keep reinstalling with success the drivers using Zadig.
-delete everything and install Kies.
none of the programs above does see the telephone now, neither windows.
Tryed to follow the steps i did before after having it installed, nothing changed.
Every of this tryes, i did the following "changes":
-removing and inserting the battery
-changing usb port
-changing cable
-changing computer
-trying to enter reset/download mode by holding vol up/down+mid button+power
Would be enough to make odin go over the setup connecting phase, or kies to recognize it, or OneClick to stop showing the window about drivers.
I read that seems i'm in a hard brick case, but since the phone is seen by odin and windows and the battery does recharge, i got still a bit of hope.
Thanks
Click the link in my signature, there's more troubleshooting steps to try. You've done a few but not all of them.
I would usually say that pulling out the cable leaves you with no hope, but you seem to have gotten a little lucky. Don't hold your breath though.
Sent from a galaxy far, far away
Hopper8 said:
Click the link in my signature, there's more troubleshooting steps to try. You've done a few but not all of them.
I would usually say that pulling out the cable leaves you with no hope, but you seem to have gotten a little lucky. Don't hold your breath though.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Tryed all the steps.
Nothing changed.
You can either keep trying or take to a service centre & pay to have it fixed *shrugs*
I am literally having the worst time. I have to go to work in 30 minutes and my phone is now broken. All I wanted to do was update it so I found a rom for my Infuse but now that I installed it, my phone seems to be broken.
Now I am trying to get it back to its normal state, but the only way to do that is put it in download mode(which works fine) and plug it into Odin. But Odin will not detect it no matter what I do. I have tried everything and I am literally pulling out my hair because this is frustrating me so much.
I hear my pc detecting it. I download drivers. I tried installing drivers through kies, but it just sits at 0%. Then I downloaded the galaxy s drivers, which does nothing when I click the setup file(or at least I can't tell that it is doing something), and then I tried finding the download specifically for my device on the samsung website, but when I run that setup file it says Samsung Android USB Modem Software not installed succesfully (9).
I just want to fix my damn phone and this software will not detect it for the life of me.
Hey I'll spare the story but basically I've softbricked/bootlooped my S4 in a way I have many times and fixed easily, however now I can't. Basically I tried to launch a bad ROM; same one thats failed me multiple times, stupid to try again but I've fixed this exact problem with this ROM before many times by flashing back to stock with Odin. The problem is my family computer was recently reformatted so I lost Odin, Kies, Drivers, anything I was using before. I redownloaded all those things only now none of them are working properly... When I load up Odin like I always have with my phone in download mode of course, select the tar and run. Only now it recognized a device is connected and I get a COM:03 or whatever but when I hit run it basically goes nowhere and just says "all threads complete completed 0 failed 0" or sometimes "completed 0 failed 1" can someone tell me what these messages are trying to tell me? I though maybe it was cuz I hadn't installed Kies but Kies says my device isn't responding, which I was told could be cuz I have a custom bootloader and my phone needs be 100% for Kies to recognize it but I feel like it used to recognize it with the custom loader. Maybe not. I also tried updating the windows USB drivers but everything was up to date. My computer makes a noise when I plug my phone in and charges it but can't be viewed in windows file explorer. Maybe that's cuz I'm in download mode.
I don't understand why it isn't working but I think its my computer. It's software is the only variable thats changed, I'm doing everything exactly as I used to. I think one of the many components to make this work isn't lined up properly and I don't know what it could be at this point. And PLEASE no answers like "did you check the USB port?". . . yes of course I checked the USB port, yes I'm in download mode, yes my cable works, redownloaded every program in multiple firmware versions. those are the only answers I've been able to find on this topic and none of them get me anywhere.
Can someone tell me what is different on my computers end now? As I've said, I've done this successfully 100 times on my computer before doing exactly what I'm now it just isn't working after the harddrive reset so I assume something has to be wrong on the computers end.
I have a VZWJFLTE SCH-I5454 galaxy s4 and I'm trying to boot back to stock (4.4.2 NC5 found on galxys4root.com).
Hello! So a while ago I bought a Cubot x9 and it was a really good phone. Recently i haven't been able to do anything with it due too I tried to root it and it bugged out so I reinstalled the rom on it and it fixed it for a while but now it won't even show that it's powering on or even charging. I tried connecting it too my pc to see if i could use odin too reset it but it's not displaying on any of the com ports. I'm curious if theres anything i can do for it. I have a newer and better phone now so i dont really need it but it would be nice to try to fix it or(In the case of my tablet) Fully modify it so nothing on it is stock on it.
Cloak2131 said:
Hello! So a while ago I bought a Cubot x9 and it was a really good phone. Recently i haven't been able to do anything with it due too I tried to root it and it bugged out so I reinstalled the rom on it and it fixed it for a while but now it won't even show that it's powering on or even charging. I tried connecting it too my pc to see if i could use odin too reset it but it's not displaying on any of the com ports. I'm curious if theres anything i can do for it. I have a newer and better phone now so i dont really need it but it would be nice to try to fix it or(In the case of my tablet) Fully modify it so nothing on it is stock on it.
Click to expand...
Click to collapse
For your information, odin is for Samsung devices only, hence why it wont recognize you because you are not in download mode. If adb or fastboot recognizes it you can manually flash stock ROM, that is, if you have adb. And also, does your phones display turn on or not?
Okay so I've ruled out a couple of the culprits and I still struggle to connect my phone
The Cable,I know this because I've tried the same cable on a different phone and it work perfectly
The MTP drivers,I know this because I've installed this more than twice and restarted both device more than I can remember also every single driver I have installed gives me code 10 error and doesn't work after restart.
all of this happened after I tried to flash twrp on my device and when I pressed flash on the SPflash app it didn't flinch so I restart my phone, and lo and behold it starts to transfer files from the twrp .img file and after that my phone was still connected but nothing changed twrp wasn't there, but my phone was still connected and I when I progressed through the page on how to flash there was the drivers for it MTK drivers after I installed them nothing was working, so I uninstalled the phones drivers, exactly after that my phone wouldn't connect again, like I said I tried every thing, that I could do.
All I wanted to do is to root that old phone and give it a new life but no something has to go wrong and I tried going to the manufacturer's website for the drivers but no dice, I tried posting on the manufacturer's forum and still nothing they haven't even replied to my post about it being publicly available, so I hope that someone out there can help me diagnose ans fix this problem.
I'm on android 8
its a blackview bv8000 pro