hello every 1
basically my galaxy GT-I9300 is stuck at boot loop and the internal storage is 0MB heres what i have done
i've installed cm11 before installing it i've backed up the stock android on a sd card
after a month i have removed cm11 and made a wipe and re-installed the stock os from the sd card the phone worked fine
after 2 days i've woke up and the phone was off it wont start i plugged in the charger after 3 hours i came back powered it up and it's stuck i can access TWRP 2.8.5.0 but i can't do a wipe or format or anything
so i downloaded the stock android on my pc to install it using odin but when i press on start this what i get
"<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)"
and it won't recognize a sd card
help me :crying::crying:
Try the rescue firmware, search general forum for the thread. If that fails then try flashing BLFB bootloader alone, but it sounds like your nand memory has failed.
boomboomer said:
Try the rescue firmware, search general forum for the thread. If that fails then try flashing BLFB bootloader alone, but it sounds like your nand memory has failed.
Click to expand...
Click to collapse
first of all thanks for replying
and i've tried to do rescue frimware it didn't work this what i get
"<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
how to do flash BLFB bootloader ?
if it's the nand memory how to fix it ?!
With Odin, nand memory failure means new motherboard/phone
boomboomer said:
With Odin, nand memory failure means new motherboard/phone
Click to expand...
Click to collapse
thanks bro i'll change the mother board then :crying::crying::crying:
full software
try the 4-file software first
kalawy said:
try the 4-file software first
Click to expand...
Click to collapse
and how to do that ?!
MoyadAM said:
and how to do that ?!
Click to expand...
Click to collapse
I think he means the rescue firmware which as already been suggested by @boomboomer >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 <<
tallman43 said:
I think he means the rescue firmware which as already been suggested by @boomboomer >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 <<
Click to expand...
Click to collapse
well i've tried it again it's stuck on <ID:0/009> Get PIT for mapping..
here's an attachment
hey is the i9300 motherboard the same as the i747 north american version?
supertac said:
hey is the i9300 motherboard the same as the i747 north american version?
Click to expand...
Click to collapse
No. Totally different phones.
Related
hello,,
i have a problem with my galaxy s3 GT-I9300
the problem is that i flashed MIUI and it worked perfectly .. after that restarted my device and it repeat restarting.
so i got to recovery mode and it failed to flash any zip file. and failed to wipe to factory reset and failed to wipe data.
i was on CWM touch 5.0.5 but someone here adviced me to flash Philez Touch and after that i couldn't access recovery anymore
i tried to flash from odin a stock rom
Code:
I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
and here is the result
Code:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Download screen says the following
Code:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YES (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Downloading..
this is all i have .. please help me
thanks in advance
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
sriram231092 said:
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
Click to expand...
Click to collapse
tried all ports.
killed all samsung kies processes.
the problem is that i flashed a recovery file and it works but when flashing any rom it stuck !!!
Same answer nand damaged take to a service centre .
jje
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
flashing
Code:
recovery-cwmtouch-6.0.3.2-GTI9300.tar
result to successful
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
ground-zero said:
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
can you please provide me the link
thanks
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
Follow the steps in this thread.
If boots, then good, if not, then try flashing an ICS firmware. Download from Sammobile.
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
I had a similar problem with my I9305, would die at 23% of system.img. Fixed by re-flashing using Heimdall - after that, Odin also works again. Apparently a bug in Odin.
(However, in my case, the problem was not caused by repartitioning, nor did I need a PIT file to fix it.)
Sent from my GT-I9305 using xda app-developers app
eng.helewa said:
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
Click to expand...
Click to collapse
Have you flashed a firmware with single CSC, modem, code files ? When you make a repartition this is necessary. And you can try an other Odin vetsion. I use permanently 1.84 or change to Heimdall.
Hope this works !
Sent from my GT-I9300 using xda premium
Hi guys, forgive me about my bad english but i'm not english....ok, let's start with my problem.
Today i want to clean my gs3 because i want to make it return to standard condition (i had a 4.2.2 rom). So i follow a guide of an italian android forum (yes i'm italian) to make a deep clean. The problem is now, when i try to flash a stock rom with odin. I put the phone in download mode (in the counter i have only 2), odin recognize it and i press start, but the process stop and says this
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
the nand write fail, i think. I've tried a lot of thing, such as change pc or change cable, but always the same error. At least i try with the pit procedure, but always the same error. I can only enter in download mode rigght now, and when i swich on the phone normally it says "firmware upgrade encoutered an issue, Plese select recovery mode in Kies and try again.
I try the way by kies, but it didn't recognise the phone.
Plese, help me, i'm desperate....
what phone model? what file
Glebun said:
what phone model? what file
Click to expand...
Click to collapse
i have the gt-i9300 no brand and for the stock rom i use this I9300XXALE8_I9300OJVALE7_OJV
trasposone said:
i have the gt-i9300 no brand and for the stock rom i use this I9300XXALE8_I9300OJVALE7_OJV
Click to expand...
Click to collapse
nobody can help me? this is a very big problem, i need my s3,please i'm desperate
you can't bump your thread more than once every 24 hours, it's against the rules.
if you flashed a pit file, you need to send it to ser
trasposone said:
nobody can help me? this is a very big problem, i need my s3,please i'm desperate
Click to expand...
Click to collapse
Seeing as your firmware is pre-sds fix, you may have a damaged nand, ....try both these.
Can you boot into stock recovery?
Can you boot into download mode?
slaphead20 said:
Seeing as your firmware is pre-sds fix, you may have a damaged nand, ....try both these.
Can you boot into stock recovery?
Can you boot into download mode?
Click to expand...
Click to collapse
As well as slappy's suggestion, also post what it says for 'product name' when in download mode (if you can boot into download mode)..
Hi All, Wiped cache partition in recovery by mistake on rooted S6 Edge 6.0.1, device then showed "kernel is not seandroid enforcing". Tried to flash stock firmware 6.0.1 (EE) and no luck.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Many thanks in advanced.
supergoose360 said:
Hi All, Wiped cache partition in recovery by mistake on rooted S6 Edge 6.0.1, device then showed "kernel is not seandroid enforcing". Tried to flash stock firmware 6.0.1 (EE) and no luck.
Added!!
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
boot.img
NAND Write Start!!
cache.img
cm.bin
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Many thanks in advanced.
Click to expand...
Click to collapse
Smart switch is way better than odin.
Sent from my SM-G925F
supergoose360 said:
Hi All, Wiped cache partition in recovery by mistake on rooted S6 Edge 6.0.1, device then showed "kernel is not seandroid enforcing". Tried to flash stock firmware 6.0.1 (EE) and no luck.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Many thanks in advanced.
Click to expand...
Click to collapse
Flash one of these g925f BTU firmwares.
Will work mate.
Or did you use cf autoroot? If so just flash the root again
http://www.sammobile.com/firmwares/database/SM-G925F/BTU/
[U,[/U]
callumbr1 said:
Flash one of these g925f BTU firmwares.
Will work mate.
Or did you use cf autoroot? If so just flash the root ]
Click to expand...
Click to collapse
Thanks will try this! Any idea as to why it fails on cm.bin?
supergoose360 said:
[U,[/U]
Thanks will try this! Any idea as to why it fails on cm.bin?
Click to expand...
Click to collapse
Is the firmware you tried to flash same as before? 6.0.1?
It can happen when trying to downgrade or bootloader locked. What rooted firmware was you on before? And what did you try to flash?
cm = Cryptography Manager. Preventing flashing previous builds is implemented in sboot.bin
The firmware you tried to flash was lower build than the firmware you was on?
callumbr1 said:
Is the firmware you tried to flash same as before? 6.0.1?
It can happen when trying to downgrade or bootloader locked. What rooted firmware was you on before? And what did you try to flash?
cm = Cryptography Manager. Preventing flashing previous builds is implemented in sboot.bin
The firmware you tried to flash was lower build than the firmware you was on?
Click to expand...
Click to collapse
I was on 6.0.1, i tried to flash with stock 6.0.1 on ee to get out of bootloop.
supergoose360 said:
I was on 6.0.1, i tried to flash with stock 6.0.1 on ee to get out of bootloop.
Click to expand...
Click to collapse
Was you on ee firmware before?
callumbr1 said:
Was you on ee firmware before?
Click to expand...
Click to collapse
The phone came with an ee sim card so i can only assume so.
supergoose360 said:
The phone came with an ee sim card so i can only assume so.
Click to expand...
Click to collapse
Did you get it direct from ee?
callumbr1 said:
Did you get it direct from ee?
Click to expand...
Click to collapse
It was a gift so i cannot say for sure.
Just flashed 6.0.1 BTU and got the same error on odin.
And now my phone shows "use emergency recovery function in smart switch" smart swith (latest version) does not connect to device. Also Thanks for your help so far!
supergoose360 said:
It was a gift so i cannot say for sure.
Just flashed 6.0.1 BTU and got the same error on odin.
And now my phone shows "use emergency recovery function in smart switch" smart swith (latest version) does not connect to device. Also Thanks for your help so far!
Click to expand...
Click to collapse
Did you try to flash this one...
http://www.sammobile.com/firmwares/download/82651/G925FXXS4DPG2_G925FBTU3DPD2_BTU/
Also what error did you get this time? Dont worry the phone isnt bricked. Just need to work out and flash the correct firmware. If that didnt work try the XEU firmware
http://www.sammobile.com/firmwares/download/85917/G925FXXU4DPGW_G925FOXA4DPGW_XEU/
callumbr1 said:
Did you try
Also what error did you get this time? Dont worry the phone isnt bricked. Just need to work out and flash the correct firmware. If that didnt work try the XEU firmware
Click to expand...
Click to collapse
Cm.bin
FAIL!
i flashed using:
PDA G925FXXU3DPDP
CSC G925FBTU3DPD2
Also i forgot to mention before i did the last flash my device was recognised by my laptop and popped up as SM-G925S which is korean but my phone box says SM-G925F
supergoose360 said:
Also i forgot to mention before i did the last flash my device was recognised by my laptop and popped up as SM-G925S which is korean but my phone box says SM-G925F
Click to expand...
Click to collapse
Then that will be why the cm.bin fail. It is a g925s. What does it say on the back of the phone? It should be printed on it?
callumbr1 said:
Then that will be why the cm.bin fail. It is a g925s. What does it say on the back of the phone? It should be printed on it?
Click to expand...
Click to collapse
It says g925f but thats because i recently replaced the back due to damage. Is it possible ive chaned the info of the phone so its showing sm-g925s?
supergoose360 said:
It says g925f but thats because i recently replaced the back due to damage. Is it possible ive chaned the info of the phone so its showing sm-g925s?
Click to expand...
Click to collapse
No you cant change the info to make it say a different model. Can you get into recovery? Turn off phone. Then hold home +up + power button?
Or plug in to pc, find your s6 edge in my computer right click and go on properties. It will give you model number and serial number
callumbr1 said:
No you cant change the info to make it say a different model. Can you get into recovery? Turn off phone. Then hold home +up + power button?
Click to expand...
Click to collapse
Sorry i cannot do that. Will this be a problem?
supergoose360 said:
Sorry i cannot do that. Will this be a problem?
Click to expand...
Click to collapse
Or plug in to pc, find your s6 edge in my computer right click and go on properties. It will give you model number and serial number?
callumbr1 said:
Or plug in to pc, find your s6 edge in my computer right click and go on properties. It will give you model number and serial number?
Click to expand...
Click to collapse
It is no longer recognised by the comouter in its current state.
supergoose360 said:
It is no longer recognised by the comouter in its current state.
Click to expand...
Click to collapse
Ok i just flashed twrp recovery and now its in recovery mode and has come up on the computer.
SM-G925S
Firmware version 1.0
Not sure if i should type my serial in here.
Hi all,
I need help to fix the S3 that i have here, model GT-I9300, I don't know what happened but I cant boot the phone it is stuck at Galaxy S3 screen, I can enter in recovery and Download mode but I am not being able to flash anything using Odin and KIES also does not work, what I have tried:
Flash stock room using Odin;
Flash TWRP Using Odin;
Update firmware using KIES, I do put the model and serial number but the KIES give a message that is not possible to start the process;
Odin fails in anything that I tried to flash:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
If I enter in the recovery mode i saw a lot of red messages saying that is not possible to mount E: bla bla.
Any help Is appreciated.
Looks like a SDS
MGSGS said:
Looks like a SDS
Click to expand...
Click to collapse
I googled for it and seems that there is no fix for it... so, good bye
Tried different USB cables and ports?
audit13 said:
Tried different USB cables and ports?
Click to expand...
Click to collapse
Yes, also different computers, I think that it is a sds
Confirmed the model # in download mode? Using the latest stock ROM from sammobile.com?
audit13 said:
Confirmed the model # in download mode? Using the latest stock ROM from sammobile.com?
Click to expand...
Click to collapse
Yes, also tried to flash twrp, stock recovery, everything fails....
Very simple and hard for me at the same time
Flashed twrp on my galaxy s6edge 925f and that was the only thing i did so far, after 1st reboot it started up, but on second time i tryed to restart phone and wiped system (think ) becouse it ways i dont have os installed, it stuck at samsung logo, smartswtich neither kies recognizes my phone (yes drivers are installed) have downloaded stock firmware and tryed to flash it via odin, but..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed
ok with odin 3.12 i have this error
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can please anyone help me out?
managed somehow make it to work, cloes please
if you have samsung kies also installed on your comp it wont work....
I have this problem , can you explain how you fixed it?
aryaazimi72 said:
I have this problem , can you explain how you fixed it?
Click to expand...
Click to collapse
If you have sboot.bin fail this happens when you try to downgrade. Just flash stock firmware through odin. Use odin v3.10.6. Of it sticks on Samsung logo it's normal can take up to 20 minutes for first boot
callumbr1 said:
If you have sboot.bin fail this happens when you try to downgrade. Just flash stock firmware through odin. Use odin v3.10.6. Of it sticks on Samsung logo it's normal can take up to 20 minutes for first boot
Click to expand...
Click to collapse
I dont think i am downgrading... im flashing a bl from a new rom but i had an old rom before this...
I have these errors :
aryaazimi72 said:
I dont think i am downgrading... im flashing a bl from a new rom but i had an old rom before this...
I have these errors :
Click to expand...
Click to collapse
Which rom are you on? And which BL are you flashing?
callumbr1 said:
Which rom are you on? And which BL are you flashing?
Click to expand...
Click to collapse
i tried crisscross and xtrestolite...
now im downloading omega.. maybe that workes...
aryaazimi72 said:
i tried crisscross and xtrestolite...
now im downloading omega.. maybe that workes...
Click to expand...
Click to collapse
Crisscross development has stopped. I recommend CarHD rom it is the best by far.
Make sure your flashing the roms through twrp