Has anyone had similar problem? I have got LG OPTIMUS 3D bricked on ICS with broken bootloader. I thought I can fix this by flashing different KDZ or .BIN file. During flashing proccess in S/W mode, after some updating percent my phone turn off and start rebooting while Flash tool loses connection between my phone ant the whole flashing procedure fails. Should't Android stay in S/W mode while battery is in good health? Share your thoughts
Related
Okay long story short, I attempted to install transparent cm7.2 status bar and phone bricked (fastboot). I fixed it and installed other phone model's cwm with windows cmd command (stupid, I know). After this I'm always stuck at lg screen. Can't get into recovery either. Lg update tool does not find the phone, neither does cmd.exe. I sometimes get the ''colored snow screen'' or whatever I should call it. But it doesnt change the fact that the phone can't be recognized by anything.
What should I do? I ran out of ideas. I can't turn the phone in any mode, it always starts with the lg screen.
bump
bump. dammit, am i really screwed? I managed to get a notification about new hardware installing yesterday but none of the driver stuff I had worked so I left it the way it was and did not install anything afterwards.
I've just entered Emergency Mode!! with volume up+down+plugging into usb. Some driver got installed but there's still no lg stuff in device manager
Completely bricked.
Doesn't turn on at all.
Okay, any excuse I can tell the phone suppliers?
cek recovery
whether you have flash before CWM recovery?
if you might have tried to go to CWM pressing the power + vol down
if you managed to do as they pleased
The phone is a brick. It doesn't turn on in any way. Completely dead. If I could get to CWM I wouldn't be asking for a story to tell the phone suppliers xD
You can use KDZ Updater and also download original lg firmware. All can be found here in this forum.
LG Optimus Hub problem
Hi
I cant turn my LG optimus hub on I tried to fix it with KDZ (lg software) and then it stuck on 1 file and then it turned off and now i cant turn on! can someone help!!!!
I'm also facing same problem ->"stuck at LG logo"
I can only enter in Emergency mode but nothing else.
can anyone tell me how to use KDZ updater in this situation??
Is there anything I can do to revive my phone from Emergency mode???
HELP PLZZZ.....
Some one please please please help... :crying:
I tried rooting my LG p765 using 'LG Optimus Toolkit' but did something terribly wrong,
Now my phone starts with LG logo and immediately shuts down... again starts with LG logo and immediately shuts down
I think i killed my phone..
Can it be alive again.
Really appreciating someone to help. :crying: :crying:
Aquentus said:
Some one please please please help... :crying:
I tried rooting my LG p765 using 'LG Optimus Toolkit' but did something terribly wrong,
Now my phone starts with LG logo and immediately shuts down... again starts with LG logo and immediately shuts down
I think i killed my phone..
Can it be alive again.
Really appreciating someone to help. :crying: :crying:
Click to expand...
Click to collapse
Lucky for you, it seems this phone is very difficult to brick thanks to LG's bootloader "precautions".
Pull out the battery, and put it back in. Hold the volume down and put in the usb cable, if you see the S/W upgrade mode screen, use this to flash it:
http://forum.xda-developers.com/showthread.php?t=2085344
If not, you'll need to install fastboot and flash uboot and xloader for ics then use the above method.
http://forum.xda-developers.com/showthread.php?t=2119090
For future rooting, i'd recommend this
http://forum.xda-developers.com/showthread.php?t=2511695
AlbinoCookie said:
Lucky for you, it seems this phone is very difficult to brick thanks to LG's bootloader "precautions".
Pull out the battery, and put it back in. Hold the volume down and put in the usb cable, if you see the S/W upgrade mode screen, use this to flash it:
http://forum.xda-developers.com/showthread.php?t=2085344
If not, you'll need to install fastboot and flash uboot and xloader for ics then use the above method.
http://forum.xda-developers.com/showthread.php?t=2119090
For future rooting, i'd recommend this
http://forum.xda-developers.com/showthread.php?t=2511695
Click to expand...
Click to collapse
Appreciating you a lot.. thank you so much for your help.. :good:
I went through your suggested threads... it seems like the Phone can be unbricked.. Hope it does.
In Last week I could not try these... bcoz of slow wifi and slow pc..
But in this week I will do it.. Lets see.. Fingers Crossed
I tried doing it as per 'cmahendra's' [GUIDE] FLASH L9 Factory ICS/JB ROM WITH OFFLINE FIX + UNBRICK
As I was able to get into 'SW Upgrade mode' [by Pressing Volume UP button and inserting USB cable into phone]
But it failed at Stage where the tool first analyzes and detects connection between USB cable and phone.
I have installed LG driver. Now dont know how to establish this connection.
PLEASE HELP!!
Aquentus said:
I tried doing it as per 'cmahendra's' [GUIDE] FLASH L9 Factory ICS/JB ROM WITH OFFLINE FIX + UNBRICK
As I was able to get into 'SW Upgrade mode' [by Pressing Volume UP button and inserting USB cable into phone]
But it failed at Stage where the tool first analyzes and detects connection between USB cable and phone.
I have installed LG driver. Now dont know how to establish this connection.
PLEASE HELP!!
Click to expand...
Click to collapse
This happens sometimes, all you need to do is install fastboot and flash the uboot and xloader for ics.
SOLVED: Got the phone working again
Hey Thanks..
I Got the phone working again.. :laugh:
First time when I did fastboot using omap4boot fastboot method, I didn't install the drivers again. :silly:
So I did that and once I got into fastboot, bingoo.... I knew my phone can be unbricked now, so I flashed the recovery.img instead of kdz.
Which got successful and I got into the recovery. So I just cleared the cache and dalvic and tried rebooting (System) the phone.
And taadaa.. the phone booted with 4.1.2 running now..
Hello!
Firstly, i would like to apologize for my English(its not my native language).
Anyways, as mentioned in the title, i get the red triangle after trying to get to the recovery mode(stuck at LG logo when turning the phone on).
I think i have tried almost all the methods, but none of them seem to work(I can get my phone to S/W Upgrade state).
When trying to install the new KDZ with LG Flash Tool, everything is fine until the LGMobile Support Tool launches, after that the errors start to pop up.
Errors i get:
Wait until software extraction is complete(stuck).
Something is wrong with PC, press retry.
Any ideas how to bring my old phone back to life?
Hello. I tried to update stock using kdz. It stopped at 20%, then dropped connection to phone. My phone stuck at S/W upgrade, cant boot, cant fastboot, no recovery, no unlocked bl, no hopes... adb, kdz cant see phone. Kdz always stopps at 20 % then again disconnect. Please can anyone help me?
Every time I use LGUP to flash kdz file in download mode my phone always restarts itself when progress reaches 14 or 15%, I tried many times but it doesn't work, is this hardware problem? If not, can you tell me how to fix it?