Related
So I've been doing my research on what case to get my Amaze which arrives Tuesday. I went ahead and decided to purchase the Trident Aegis Blue. From what I've read it a strong and reliable case. The only complaint I've read that is important to me is the lack of three noise cancellation holes on back.
So like one member (don't remember his s/n) did I want to drill three nice little holes in the hard and rubber case yet I want it to still look nice and professional. I emailed Trident three times but they continue to ignore me.... Can anyone help me or give me advice on going about this procedure? I would really appreciate it. Thanks
well the easiest way would be to map the hole's location onto the case by measuring the distance from the camera or lay the back cover of the phone in the case and use a needle to mark the hole's spot. (shouldnt be too hard)
then to drill through the plastic, just use a small drill bit for that. and go slow so the friction doesnt melt the plastic or mess up the drilling....
then for the silicone skin... just put the skin onto the plastic case and with hot needle (heat with lighter or something) just poke through the silicone
that should give the desired effect that your looking for
please explain to me how you can even get this case on the phone. bought it, case refuses to go on. worst experience with a case ever
Slide the phone in from the bottom.
Wait....I sent this with Tapatalk?
mrmako777 said:
please explain to me how you can even get this case on the phone. bought it, case refuses to go on. worst experience with a case ever
Click to expand...
Click to collapse
Start from the top and work your way around it.
Sent from my GT-P7510 using XDA
I love this case!
Sent from my GT-P7510 using XDA
Wish they made the outter cover different colors too.
Double0EK said:
Slide the phone in from the bottom.
Wait....I sent this with Tapatalk?
Click to expand...
Click to collapse
rubyman94 said:
Start from the top and work your way around it.
Sent from my GT-P7510 using XDA
Click to expand...
Click to collapse
tried everything when i first got it a few weeks ago...ill try again and keep ya posted. otherwise, i might have a case for sale
Update!
So I finally received a reply back from Trident Cases in regards to the lack of three holes on the back case that we need. This is her reply:
Good afternoon,
We have fixed this issue, I apologize the pictures on our website do not reflect the change.
Best Regards,
Rosa Alcala
Department Coordinator
2029 South Business Parkway
Ontario, CA 91761
I have asked her to email me pictures on the updated cases. But for some reason I don't believe this....
nxttruck2002 said:
I have asked her to email me pictures on the updated cases. But for some reason I don't believe this....
Click to expand...
Click to collapse
The case I got have 1 hole out of 3 (right above the camera lens).
New user here, can't post pic.
imatrap said:
The case I got have 1 hole out of 3 (right above the camera lens).
New user here, can't post pic.
Click to expand...
Click to collapse
email them to me.
Called Trident, spoke with Kelly, and told me that if we wanted 2 more holes, we will have to email them & it will be forwarded to their design team.
The manager told Kelly to tell me that adding 2 more holes are not necessary when I first called.
Do you think they will offer an exchange from the old design to the new one? I hope so. This case was expensive.
_____________________________________
It's Better To Fail At Originality
Than To Succeed In Imitation.
-Mighty Healthy
Click to expand...
Click to collapse
_____________________________________
Double0EK said:
Do you think they will offer an exchange from the old design to the new one? I hope so. This case was expensive.
Click to expand...
Click to collapse
Yes, they do. Did you bought the case from Tridenteer? Kelly herself told me that if they updated the case, it can be exchanged within the one year warranty from the date of your purchase.
imatrap said:
Yes, they do. Did you bought the case from Tridenteer? Kelly herself told me that if they updated the case, it can be exchanged within the one year warranty from the date of your purchase.
Click to expand...
Click to collapse
That would be perfect for me, I bought this case too 2 month ago and I really didn't like the fact that it didn't have the holes, so I ended up buying the ballistic case which in my opinion is way better that the trident, I mean don't get me wrong both are really good, but the ballistic feels way better, I still have the trident case for backup.
mrmako777 said:
tried everything when i first got it a few weeks ago...ill try again and keep ya posted. otherwise, i might have a case for sale
Click to expand...
Click to collapse
put the phone in the silicone first, then put the hardshell over that, I don't remember it being difficult at all... ? I don't use my aegis though, just my kraken...
First silicone case goes on phone then top hard plastic , now this is tricky part the back part . Put right side on first then clip on left side
Sent from my HTC_Amaze_4G using xda premium
http://www.goballisticcase.com/products/htc-amaze-4g-ballistic-shell-gel-sg-series-case I recommend this case! LOVE IT!
S1D3winder016 said:
http://www.goballisticcase.com/products/htc-amaze-4g-ballistic-shell-gel-sg-series-case I recommend this case! LOVE IT!
Click to expand...
Click to collapse
For the money this is definitely the better case (than aegis)... Kraken AMS still the best one available though!
sent on a mastadon by way of intercontinental epic journey
Hi guys.
Here's the thing: I'd really like to use my Note 3 without a case/skin/bumper,etc.
Now, I have a tempered glass screen, so that's covered. Also, there are many replacements for the back cover - I could easily replace it or even buy a cheap one and keep the original in the box.
Now, that leaves the original bumper. I don't like those aluminum bumpers, as they make the phone bigger and also block the signal. The plastic bumpers also look fugly.
So, down to my main question: if I get the original bumper damaged, how easy is it to replace it? And is it expensive?
Does anyone have the experience in doing this?
Thanks in advance.
lift off said:
Hi guys.
Here's the thing: I'd really like to use my Note 3 without a case/skin/bumper,etc.
Now, I have a tempered glass screen, so that's covered. Also, there are many replacements for the back cover - I could easily replace it or even buy a cheap one and keep the original in the box.
Now, that leaves the original bumper. I don't like those aluminum bumpers, as they make the phone bigger and also block the signal. The plastic bumpers also look fugly.
So, down to my main question: if I get the original bumper damaged, how easy is it to replace it? And is it expensive?
Does anyone have the experience in doing this?
Thanks in advance.
Click to expand...
Click to collapse
http://www.ifixit.com/Teardown/Samsung+Galaxy+Note+3+Teardown/19209 this is the teardown by Ifix and it should reference the specific repair the only issue I'm at work and cannot see the images so I cannot give you my opinion but the last few times IE note 2 and s3 the silver bezel has been a separate part of the screen and is held on via a few screws so in short fairly easy if it follows that trend
EDIT: I found this thread they talk about the Bezel replacement http://forum.xda-developers.com/showthread.php?t=2493623
unholyfatman said:
http://www.ifixit.com/Teardown/Samsung+Galaxy+Note+3+Teardown/19209 this is the teardown by Ifix and it should reference the specific repair the only issue I'm at work and cannot see the images so I cannot give you my opinion but the last few times IE note 2 and s3 the silver bezel has been a separate part of the screen and is held on via a few screws so in short fairly easy if it follows that trend
EDIT: I found this thread they talk about the Bezel replacement http://forum.xda-developers.com/showthread.php?t=2493623
Click to expand...
Click to collapse
I'm sorry I never got to thank you for the answer. I'll do some more research based on all that.
Thanks!
lift off said:
I'm sorry I never got to thank you for the answer. I'll do some more research based on all that.
Thanks!
Click to expand...
Click to collapse
no problem good luck with your phone modification
Great info
Sent from my SAMSUNG-SM-N900A using Tapatalk
So I wasn't too big of a fan of the Midnight Blue color, but it was the only color available from T-Mobile, so I went with it. I purchased a white back cover from ebay and this is how I swapped it out.
Link to back purchased:
http://www.ebay.com/itm/261685948756?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
First is the replacement cover itself. It comes with adhesive already applied and a blue cover to be removed before sticking on.
To take the cover off the Nexus 6 I used a dull razor blade, as it was the only thing I could find that wold fit between the back cover and the metal housing. I stuck it in the bottom corner because I thought it would make it easier to peel up. I also put a piece of electrical tape at the point where the razor would touch the metal housing to avoid chipping the metal.
WARNING!!!! There is a ribbon next to the power and volume buttons that will pull up with the cover when removing make sure to use your finger to hold it down as you pull on the cover. Take your time.
Peel off protective cover of new back and stick on . Pretty simple.
Finished.
I do like it wayyyy better than the midnight blue back color. The blue was too boring for me and I am actually liking the 3 tone with white,black and blue. However, once they release the housing I will replace with the housing shipped on the Cloud White model to get rid of the blue. Also remember cloud white is slightly off white so don't a bright white. And thanks to ifixit for the instructions for removing back cover.
And FYI, the white cover has the same texture as the blue. It is also a fingerprint magnet as well, but less visible in most lighting due to the color.
Nice, thanks for sharing. Pics r a little small but still helpful.
Sent from my Nexus 6 using Tapatalk
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
natezire71 said:
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
Click to expand...
Click to collapse
It feels just like factory. I'm honestly not sure if it is factory but it is identical to the stock and a perfect fit.
bigmike2424 said:
It feels just like factory. I'm honestly not sure if it is factory but it is identical to the stock and a perfect fit.
Click to expand...
Click to collapse
Could I get a link to the page you ordered from? I want to make sure it has the adhesive installed.
natezire71 said:
Could I get a link to the page you ordered from? I want to make sure it has the adhesive installed.
Click to expand...
Click to collapse
http://www.ebay.com/itm/261685948756?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Nice, thanks for the write up, especially the part about the ribbon cable. I ordered a new one on Dec 1 but the tracking hasn't updated since the 4th so who knows when I'll get it.
Edit - Looks like it showed up in Chicago today. Maybe tomorrow I'll have it.
---------- Post added at 08:28 AM ---------- Previous post was at 08:26 AM ----------
natezire71 said:
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
Click to expand...
Click to collapse
This is why I got a new one. My new Nexus 6 from Sprint came with a few of those scuffs on the back almost like they used the phone as a hockey puck and slid it across the floor before packaging it or something. Nothing I have done has created anything like those scuffs so I am not sure what these phones went through during assembly. I knew the back covers would be cheap since there isn't even an NFC tag or anything attached to them.
Is it possible to still stick the old back on the phone after removing it or will the adhesive not be strong enough to stick? I was thinking about getting a white for fun to see if I like it.
Pilz said:
Is it possible to still stick the old back on the phone after removing it or will the adhesive not be strong enough to stick? I was thinking about getting a white for fun to see if I like it.
Click to expand...
Click to collapse
The adhesive seems strong enough on the original cover to reapply. I even put the protective layer that cane with the new back on the old one.
bigmike2424 said:
The adhesive seems strong enough on the original cover to reapply. I even put the protective layer that cane with the new back on the old one.
Click to expand...
Click to collapse
That's good news, it looks like I'm ordering one, I may get a blue one and 'texturize' it and then install it.
Pilz said:
That's good news, it looks like I'm ordering one, I may get a blue one and 'texturize' it and then install it.
Click to expand...
Click to collapse
i was thinking of picking one up, to see what/how i can paint it black (and look good) while adding texture. Let me know if you have any ideas on how you are going to do this!
Thanks. That's good to know because I'm sure I will be replacing it at some point (I have no case and the back cover will surely get scratched up at the minimal contact point)
PaisanNYC said:
i was thinking of picking one up, to see what/how i can paint it black (and look good) while adding texture. Let me know if you have any ideas on how you are going to do this!
Click to expand...
Click to collapse
There's a rubber paint that I saw at home depot for random stuff like painting your rims and dumb things and its made by krylon if I recall correctly. There is also a sand textured paint for outdoor decor which looked interesting. I'll have to see which one I want before I buy the back.
Pilz said:
There's a rubber paint that I saw at home depot for random stuff like painting your rims and dumb things and its made by krylon if I recall correctly. There is also a sand textured paint for outdoor decor which looked interesting. I'll have to see which one I want before I buy the back.
Click to expand...
Click to collapse
PlastiDip
Pliind said:
PlastiDip
Click to expand...
Click to collapse
Someone tried that with the dbrand skin and it started to flake after a couple of days.
Pliind said:
PlastiDip
Click to expand...
Click to collapse
I have to agree, PlastiDip doesn't work well for something being handled as much as a phone, even if you sandpaper the item for better adhesion before painting
How long did the back cover take to arrive at your doorstep? It'd be nice to do the conversion before I head off for vacation in a week or so from now.
radeonboy said:
How long did the back cover take to arrive at your doorstep? It'd be nice to do the conversion before I head off for vacation in a week or so from now.
Click to expand...
Click to collapse
Shipping from NJ only took 3 days to get to me in Texas.
Thanks for this. Just ordered one!
does anyone know if replacing the white back with one of these blue ones will void any kind of warranty?
Hello, I've got a question. Does anybody have got (or know where to find it) a template of the back panel of the phone? I've got a sheet of 3M foil and I'd like to cut out a protective sticker from it, but I need a template in 1:1 scale. Maybe someone have got something like this?
You may try searching on korean google.co.kr or ask from this YouTube channel JerryRigEverything
Not sure but I hope you will find that.
Sent from my SM-G930F using Tapatalk
tharindunw said:
You may try searching on korean google.co.kr or ask from this YouTube channel JerryRigEverything
Not sure but I hope you will find that.
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Thanks for your help, I've found some templates, I'll have to print them on paper and fit on the back, maybe I'll find the good one
debowiakr said:
Hello, I've got a question. Does anybody have got (or know where to find it) a template of the back panel of the phone? I've got a sheet of 3M foil and I'd like to cut out a protective sticker from it, but I need a template in 1:1 scale. Maybe someone have got something like this?
Click to expand...
Click to collapse
And this is why you never throw away them plastic screen protectors that where on the phone when you bought it I always stick mine to the box.
RiTCHiE007 said:
And this is why you never throw away them plastic screen protectors that where on the phone when you bought it I always stick mine to the box.
Click to expand...
Click to collapse
I don't have mine yet
Maybe next week but I like to be prepared. That's why I've bought an UAG case and screen protector
debowiakr said:
I don't have mine yet
Maybe next week but I like to be prepared. That's why I've bought an UAG case and screen protector
Click to expand...
Click to collapse
Ah well then you are lucky and the phone will come with a ready to use template on the back side and front
Any chance you could share those templates?
I've got something like this
Hi all, I'm in search of a skin/wrap that covers the front, back and sides of the phone. Can anyone recommend one? Thanks.
Google sticker boy. I usually buy from them every year and have one on my S8 .
Airax
Airax said:
Google sticker boy. I usually buy from them every year and have one on my S8 . Airax
Click to expand...
Click to collapse
Did you get a complete wrap? How difficult is it to install? It looks like there is lots of room for operator error when installing.
It covers the phone completely. You get separate peices for the side and back. It's not hard but fiddly. A point to note is if you have a tight case the top/bottom stickers can get pushed off as you fit the case on so watch out.
Airax
LochNiss said:
Hi all, I'm in search of a skin/wrap that covers the front, back and sides of the phone. Can anyone recommend one? Thanks.
Click to expand...
Click to collapse
Just go to durex.com.
Sent from my SM-G950F using Tapatalk