This is based on KitKat NK6
For Xposed lovers
Features:
stock
deodexed
zipaligned
debloated(light)
init.d (rom+kernel)
ext sd fix
secure storage disabled ( 4 xposed to work properly )
addons: apps
3 minit battery (dr ketan)
power menu APP (multi reboot 4 edge screen) Dr Ketan
airdroid
universal init.d
es file manager
titanium backup
xposed + wanam
flash player
lmt launcher
BOOTLOADER and Modem NK6
https://www.androidfilehost.com/?fid=24052804347761985
DOWNLOAD
THUNDERBOLT V1.1 NK6
https://www.androidfilehost.com/?w=files&flid=28114
REMOVED BLOAT
https://www.androidfilehost.com/?fid=95916177934545826
DONT FORGET TO HIT THE THANKS BUTTON
Downgrade from lollipop
DOWNGRADE to KITKAT
EASIEST WAY TO REVERT TO KK
: Enable USB debugging reboot into recovery (in lollipop)
: WIPE:-- SYSTEM, DATA, CACHE, INTERNAL SD, DALVIK (dont reboot)
: battery out 3 button reboot into DOWNLOAD MODE (safe bet)
: odin 3.09 and install the kk tar file
and you'll be back at kitkat
DONT FORGET TO HIT THE THANKS BUTTON
Reserved 1
Reserved 2
Reserved 3
dear panjaby:
after flash this ROM cant boot......
it shows:
kernel is not seandriod enfoacing
set warranty bit : kernel
anybody flash this rom successful?
I am using the same ROM. Were you on stock rooted nk6 before you flashed this. If not could you plz give it a go after flashing over stock.
KEEP NANDROID BACKUP
Full wipe with cwm : system,data,internal SD,cache,dalvik.
Then flash stock and root it + recovery
Flash Thunderbolt
Sent from my GT-N5120 using Tapatalk
panjaby said:
I am using the same ROM. Were you on stock rooted nk6 before you flashed this. If not could you plz give it a go after flashing over stock.
KEEP NANDROID BACKUP
Full wipe with cwm : system,data,internal SD,cache,dalvik.
Then flash stock and root it + recovery
Flash Thunderbolt
Sent from my GT-N5120 using Tapatalk
Click to expand...
Click to collapse
you mean i flash this http://www.sammobile.com/firmwares/download/40539/N915GXXU1ANK6_N915GVAU1ANK7_VAU/
and root...then flash Thunderbolt NK6,right?
Yes
panjaby said:
Yes
Click to expand...
Click to collapse
it's working~
Xposed and Viper Sound are all working fine
my n915g is Bri Taiwan Model.
BTW ...is this Rom have performance Tweak already?
or Should i need to flash performance tweak like L SPEED v1.6 REBORN?
thank you so much!
This is my battery stat for today i have added nothing extra so far first try trickster mod. If you dont like it then go for something else.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for the good work here Panjaby. Version 1.1 is smooth and stable, I have had no issues.
It feels good to be back on KK. Lollipop looks great, but until we get Xposed and smart lock get improved, I think I will be staying here.
I am more then happy to help out with any testing you need, just shoot me a PM.
I have 915g and upgraded from note 3 so don't know which root method and recovery to be used.. please someone help me??
Smarty sharma said:
I have 915g and upgraded from note 3 so don't know which root method and recovery to be used.. please someone help me??
Click to expand...
Click to collapse
1. Download TWRP Latest2.8.5
2. Download su v2.46 zip and copy it to your sd card Internal or external
3. Connect with odin uncheck (auto reboot) and flash twrp.
4. Remove battery and reboot into recovery
5. Flash su 2.46 zip.
6. Reboot normally.
7. (optional) disable or uninstall knox using titanium or your method of choice.
Thanks.. I will flash this kk rom because I was using Dr. Ketan's lollipop rom in my note 3 and missing viper and xposed
panjaby said:
1. Download TWRP Latest2.8.5
2. Download su v2.46 zip and copy it to your sd card Internal or external
3. Connect with odin uncheck (auto reboot) and flash twrp.
4. Remove battery and reboot into recovery
5. Flash su 2.46 zip.
6. Reboot normally.
7. (optional) disable or uninstall knox using titanium or your method of choice.
Click to expand...
Click to collapse
hi:
it must be flash Rom by TWRP?
or CWM is working too?
thank you~
Above are instructions to root.
Rom can be installed by either recovery
SM-N915G
panjaby said:
Above are instructions to root.
Rom can be installed by either recovery
Click to expand...
Click to collapse
Currently im on N915GXXU1ANK4.
can i flash THUNDERBOLT NK6? Without flashing stock NK6?
flipmodeseven said:
Currently im on N915GXXU1ANK4.
can i flash THUNDERBOLT NK6? Without flashing stock NK6?
Click to expand...
Click to collapse
I tried same but phone went in bootloop
Smarty sharma said:
I tried same but phone went in bootloop
Click to expand...
Click to collapse
Try to flash this first
http://www.sammobile.com/firmwares/download/39919/N915GXXU1ANK6_N915GOPS1ANK6_OPS/
then flash Thunderbolt NK6
Related
Pre-Rooted Stock Firmware
Goodevening everybody,
Many of us love root but want to stay stock (like me) well. By following this guide: link ©quetzalcoatl2435. I was able to pre-root Stock Central Europe 1.
This thread is made with only one purpose: To share it!
If you want me to make one of your own choosing (branded, unbranded, generic etc) give me a call + download link for your ftf file and I'm good to go. Or follow the guide I linked to!
Details of all the pre-rooted ROMS I've made:
Fully stock
No bloatware removed or added (you can do this yourself now)
Still Odex
No CWM after flashing but you should be able to install it again
REQUIREMENTS
CWM (downgrade to 4.1.2 root it and install CWM)
This SU zip Link
This Kernel File Link
Flashtool
Patience
STEPS:
Download the .zip file (see downloads)
Put the pre rooted firmware + SU zip into your internal SD
Flash both files and turn the phone off
Open flashtool into flashmode
Flash 266 kernel
Reboot device
Done
If you want to have a custom Recovery you could try to flash the following zip:
- Download: Dev Host
DOWNLOADS
Stock FirmWare CE 1 Pre-Rooted
- Download: Google Drive
Stock FirmWare Global Pre-Rooted
- Download: Google Drive
Stock Firmware Generic IN Pre Rooted (C5302)
- Download: Google Drive
SCREENS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you due to any reason want to go back to fully Stock without root and the lose of data:
Flash Stock ROM via Flashtool but uncheck DATA at WIPE this will keep your installed applications etc
~Credits:
Many thanks to quetzalcoatl2435 for his amazing guide
dssmex for the recovery zip
Chainfire for the SU
Sony for the firmware
Google for Android
Me for rooting and sharing (bit selfish not to put my own name here :angel: )
Thanks
I share Central Europe 1 .266
Mirrors will come in handy.. As Google Drive is slow and I dont have or use mediafire/devhost.
Has someone bootlop? I have "SONY" again and again...
No it is running fine here. You did flash the kernel after flashing the rom itself?
Yes i did. I followed the instriction. I'll try once again tomorrow. How log Xperia is starting after flash? Maybe I waited too short. I have logo SONY which is dissapearing and showing again.
Well it is weird actually since I have it fully booting etc.
You can try a few things:
- Redownload and reflash
- Reflash
- update to 266 downgrade and try again
Finaly i flashed rom. Everything was allright until I try use titanum backup.IT says theres no root access. I checked supersu (the same about no root) and root checker. I Think root dissapeared after flash 266 kernel only. I have no idea, IT is to much for me.
Everything works fine, SU too. Thanks.
wipe?
Do I have to wipe anything prior to installing?
---------- Post added at 08:38 AM ---------- Previous post was at 08:22 AM ----------
I have done everything according to the OP.
I don't have root after all. Titanium Backup says that and I have no SuperSU either.
Weird...
Any idea?
moolash said:
Do I have to wipe anything prior to installing?
---------- Post added at 08:38 AM ---------- Previous post was at 08:22 AM ----------
I have done everything according to the OP.
I don't have root after all. Titanium Backup says that and I have no SuperSU either.
Weird...
Any idea?
Click to expand...
Click to collapse
well done
good for a base
dipesh1502 said:
well done
good for a base
Click to expand...
Click to collapse
What do you mean? I don't get it
You flashed the Su zip? Because the program and a few needed files are in there If not then you have to start over since CWM is removed after installing the ROM.
mrjraider said:
You flashed the Su zip? Because the program and a few needed files are in there If not then you have to start over since CWM is removed after installing the ROM.
Click to expand...
Click to collapse
Yes, I have. I flashed the ROM, then SU.zip, power off, flash .266 kernel only.
Reboot. All is fine, except for no root.
To be honest, I am already back to the CWM backup of 4.1.2 with root and CWM and bloat removed.
Your job is appreciated, though.
moolash said:
Yes, I have. I flashed the ROM, then SU.zip, power off, flash .266 kernel only.
Reboot. All is fine, except for no root.
To be honest, I am already back to the CWM backup of 4.1.2 with root and CWM and bloat removed.
Your job is appreciated, though.
Click to expand...
Click to collapse
Haha, thanks!
I just dont know why you cant get it to work
Thanks. everything works
You're welcome
Is it ok to flash directly from Existenz 2.1.5 which is based .266? or Do i really need to downgrade to 4.1.2?
:good::good::good::good:
Great
Is it ok to flash directly from Existenz 2.1.5 which is based .266? or Do i really need to downgrade to 4.1.2?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on Lollipop v5.1.1
Device C6833
Features Root & Multi-recovery included
Bootloader locked and unlocked
Built with XperiFirm and PRFCreator
Features
Odexed
Root
Multi-Recovery
Signed
Zipaligned
Pics quality tweaks (replacing the build.prop)
Snapdragon tweaks (replacing the build.prop)
Audio tweaks (replacing the build.prop)
Google DNS (replacing the build.prop)
Dialing tweaks (replacing the build.prop)
Network tweaks (replacing the build.prop)
Download
Firmware C6833_14.6.A.0.368 No Brand Italy Unlocked Bootloader (LP 5.1.1)
Firmware C6833_14.6.A.0.368 No Brand Italy Locked Bootloader (LP 5.1.1)
build.prop for C6833_14.6.A.0.368 edited by Jo-san
Xperium Bootanimation developed by Interface (Team Delirium)
How to flash it
make sure to be on a rooted rom with Philz recovery
download saving the rom on your External SD
reboot to Philz recovery
wipe (data, cache, dalvik/art cache) and format (cache, system, data)
flash rom
Info
to replace the build.prop you must replace it on system/ with the rw-r--r-- permissions
to replace the bootanimation you must replace it on system/media/ with the rw-r--r-- permissions
to install Xposed Installer properly you must download the APK and flash THIS from the recovery
I would say thanks to all the developers into theese tool projects [NUT], IaguCool and zxz0O0! Please to consider a donation for a beer!
Any damage is at your sole responsibility!
Does it work on the 6833 version?
albireox said:
Does it work on the 6833 version?
Click to expand...
Click to collapse
of course
Jo-san said:
of course
Click to expand...
Click to collapse
Thanks for this, it works fine, Unlocked, I did remove loads of apps and firmware to suit my own usage.. this just works.
(removed all social apps, auto up-load stuff, and a couple of silly thing like sketch and AR effects.. just stuff I don't need or want)
corum3 said:
Thanks for this, it works fine, Unlocked, I did remove loads of apps and firmware to suit my own usage.. this just works.
(removed all social apps, auto up-load stuff, and a couple of silly thing like sketch and AR effects.. just stuff I don't need or want)
Click to expand...
Click to collapse
Yes me too! It's a pleasure! I developed many rom for Galaxy Note before...but this is the first work i m sharing on xda...this isn t a so elaborate work but i m starting a deodex project #staytuned
Big thanks to the OP for this one have been foxed trying to root mine on lollipop and this is perfect!! This is untouched apart form the root and recovery?? What does the prop mod do??
Thanks Steve
Yep, this is an original firmware with root and recovery...the build.prop include my tweaks for a better wifi and 3g signal...increasing wifi and 3g performance...streaming video....battery performance..and other...
Please to follow my procedure to flash closely!
Jo-san said:
Please to follow my procedure to flash closely!
Click to expand...
Click to collapse
Whats the maximum cpu frequency from Sony in Stock Rom???
Sent from my Z Ultra using Tapatalk
Godaemon said:
Whats the maximum cpu frequency from Sony in Stock Rom???
Sent from my Z Ultra using Tapatalk
Click to expand...
Click to collapse
2.22
please, leave me a feedback
can i flash it on stock KK 4.4.4 ?
raisqureshi said:
can i flash it on stock KK 4.4.4 ?
Click to expand...
Click to collapse
Of course but follow my guide...you need root and recovery before flash my rom
Jo-san said:
Of course but follow my guide...you need root and recovery before flash my rom
Click to expand...
Click to collapse
Your guide is very basic, followed it with mine but it will not install. Says installing, 2 seconds later it tells me it's installed. But it's not.
Was you on Philz Recovery?
Jo-san said:
Was you on Philz Recovery?
Click to expand...
Click to collapse
Yes as I said I followed your guide so was using Philz Recovery, even tried TWRP still same result. Will try downloading again just to make sure it's not a corrupt zip file.
Will report back after downloaded and try installing again.
Edit: All good now, had the wrong version of Philz Recovery installed. Installed and running now.
samorgs said:
Yes as I said I followed your guide so was using Philz Recovery, even tried TWRP still same result. Will try downloading again just to make sure it's not a corrupt zip file.
Will report back after downloaded and try installing again.
Edit: All good now, had the wrong version of Philz Recovery installed. Installed and running now.
Click to expand...
Click to collapse
You have to revert back to kk and do a 100% wipe of data internal SD this is a common issue.
RealityFails said:
You have to revert back to kk and do a 100% wipe of data internal SD this is a common issue.
Click to expand...
Click to collapse
As I said, turned out I was using the wrong version of Philz. I was running KK, just that with the version of Philz I was using it just was not installing the ROM. Installed the correct Philz and it installed straight away.
?
samorgs said:
As I said, turned out I was using the wrong version of Philz. I was running KK, just that with the version of Philz I was using it just was not installing the ROM. Installed the correct Philz and it installed straight away.
Click to expand...
Click to collapse
Haha missed that Part
i m going to do a new rom as soon as the new firmware on xperifirm will be able to download
THIS kernel is for N910F
here's a kernel, compiled from N910F sources XXU1COI3, with XXU1COI3 Ramdisk
It has a single modification, in order to boot the 910F with root, in new firmware 5.1.1.
Everything else is a stock kernel.
Fixed the warning "kernel is not seandroid enforcing" on boot
my advice is, flash this kernel, and next, root your phone with your preferred method
enjoy:
Mod edit: No longer supported, link removed.
flash it in recovery
To install Root:
patensas said:
All i did was:
- flash the rom with odin
- flashed TWRP 2.8.7.0 with odin
- flashed kernel with TWRP
On exit from TWRP i got no root notification and i selected to apply root.
That was all that needed to be done on my device to gain root.
Click to expand...
Click to collapse
About warning "Notice Security":
lonegan said:
As you now have root access, you can install Titanium Backup and freeze SecurityLogAgent service to get rid of that message.
Click to expand...
Click to collapse
Sources (Updated 8/10/15):
http://www.mediafire.com/download/erb72lq6rsp0rlt/inicial_comit_2.zip
Merge the files in zip above with Samsung sources and compile it
Works.. nice one.. cheers
Well done
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
root with what??
i flash this ok no problem.....but root didnt work
i used same as i used with lolipop 5...which was..... CF-Auto-Root-trlte-trltexx-smn910f.tar
thanks i am in bootloop now...need help
edwardob said:
i flash this ok no problem.....but root didnt work
i used same as i used with lolipop 5...which was..... CF-Auto-Root-trlte-trltexx-smn910f.tar
thanks i am in bootloop now...need help
Click to expand...
Click to collapse
The auto root option doesn`t work on 5.1.1
Best thing to do seems to be flashing latest TWRP, flash the kernel within TWRP and use the root option that TWRP offers.
root option
my version 2.8.5 doesnt have root option
edwardob said:
my version 2.8.5 doesnt have root option
Click to expand...
Click to collapse
All i did was:
- flash the rom with odin
- flashed TWRP 2.8.7.0 with odin
- flashed kernel with TWRP
On exit from TWRP i got no root notification and i selected to apply root.
That was all that needed to be done on my device to gain root.
edwardob said:
my version 2.8.5 doesnt have root option
Click to expand...
Click to collapse
Just flash this kernel using TWRP and then SuperSU beta 2.49 (also using TWRP or other custom recovery)
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
BTW. Good work @zamcum, thanks!
Later EDIT:
Or use @patensas's method described above
thanks for all the help
looks like i have install room again ...then twrp then the zip file in twrp.....that right?
im in a boot loop
- Install TWRP 2.8.7.0 with Odin
- Flash within TWRP the Kernel (ZIP) posted in this thread
- Restart TWRP and will ask you to install SuperSU, install it
- After restart run SuperSU, will ask to update SuperSU from market, install, update binaries
At last i'm on my domain with root...
Thank you for your work zamcum
thanks again
i dowloaded zip but it was ccorrupted......install ok the second time ....thats what the problem was thanks
yeah I'm getting file corrupted too when flashing..downloaded twice
Sorry for the douch question but where can i get the 5.1 Rom?
d4rk1337 said:
Sorry for the douch question but where can i get the 5.1 Rom?
Click to expand...
Click to collapse
Sammobile or Samsung live blog
---------- Post added at 07:49 AM ---------- Previous post was at 07:47 AM ----------
There is a pretty amazing kernel from the Echoe rom people. Sign up to the forum to get access. I tried the above method but even after TWRP 'rooted' the rom, supersu wasn't able to function. Downloaded from playstore and then all was right.
security warning
how are you guys dealing with constant security warning... since update
edwardob said:
how are you guys dealing with constant security warning... since update
Click to expand...
Click to collapse
+2 on that one. Tried freezing everything Knox related. Still get that anoying warning...
Sent from my SM-N910F using Tapatalk
Reb0rn said:
+2 on that one. Tried freezing everything Knox related. Still get that anoying warning...
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
As you now have root access, you can install Titanium Backup and freeze SecurityLogAgent service to get rid of that message.
Hi guys..
Installed rom with 5.1.1, by using a PIT file by 3 Italia. Now i want to root.
Trying to install the twrp within Odin, but after one seconds of upload the program is in block.
Also need the PIT file when install a recovery??
great stuff
@zamcum, nice work!!!
Thank you my friend!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B]*** Disclaimer***[/B]
IF YOUR DEVICE IS ALREADY ROOTED TAKE A " BACKUP " OF YOUR FULL ROM
INCLUDING " EFS " using " TWRP " to your SD Card
*I Am NOT RESPONSIBLE IF YOU DAMAGE YOUR DEVICE*
*I Am NOT RESPONSIBLE IF YOUR ALARM FAILS TO RING AND YOU GET FIRED FOR BEING LATE*
*I Am NOT RESPONSIBLE IF YOUR DEVICE CONVERT TO NOTE 7 AND EXPLODE*
*Your Warranty Will be VOID If you Flash TWRP Recovery and ROM*
Based on T531XXU1BPK3/T531XXU1BOE6 (Novemeber 1, 2016 patch)
Extremely Deboated (still keeping all core features)
Deodexed
Zip-aligned
200% De-Knox(remove ASKS security also)
Rooted with the latest SuperSU v2.79 SR3
Added the latest Busybox v1.25.1
Added latest Sqlite3 v3.12.1
ROM size only 581 mb
Removed safe volume warning
Completely removed Signature verification
Added 5 way reboot menu
Added extra toggles to notification panel
Set animation scale to x.25 on system level
Added welcome text
Many many more coming, this is only the first build.
===>DOWNLOAD<=== only use twrp from below!!!
IF YOU ARE COMING FROM KITKAT FLASH THIS MODEM AND BOOTLOADER IN ODIN.
1. Flash this TWRP In Odin [ONLY USE THIS TWRP- RILL WONT WORK IF YOU USE OTHER VERSIONS!
2. Reboot into TWRP
3. Wipe System/Data/Cache,Dalvik Cache
4. Flash ROM Wait at least 5 minutes for first boot.
XDA:DevDB Information
[ROM][T531] Aj's Tab 4 ROM, ROM for the Samsung Galaxy Tab 4
Contributors
jonathanmohamed
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2017-02-10
Created 2017-02-10
Last Updated 2017-02-09
@jonathanmohamed - ROM
@ASSAYYED - Rom Kitchen
@Chainfire - SuperSu v2.79 SR3
@sub77 - TWRP
@yash92duster & @amtra - Advice & various things
XDA Community and everyone is S5 and S6 Unified Threads
1. Why isn't Wifi working?
=> Because you didnt read, i specifically said to you the TWRP from above.
2. Can this work one other Tab 4 Devices?
=> No only for T531
3. Why can't i take screenshot?
=> Method 1. Open root explorer go to Internal SD card and either delete "Pictures" folder or rename it to "Pictures1"
Youtube guide if needed https://www.youtube.com/watch?v=NWOimkOHXt4
=> Method 2: Reboot into TWRP, go to Advanced/File Manger/sdcard/Pictures - then either delete the folder or rename it to "Pictures1"
=> Method 3: Do a compete clean installation, incl. Internal Storage wipe
reserved 2
reserved 3
Any screenhot ?
nar67 said:
Any screenhot ?
Click to expand...
Click to collapse
really, its just stock based... but sure ill post some, check back later.
So far my system (SM-T531) is good.
I'm looking for a ROM for my tab that will enable my Sim Card and a stable wifi again, even the camera is working now.
Tried the marshmallow and nougat custom roms but I can't trade those stuff for now.
thanks for this @jonathanmohamed (AJ?)
wifi doesn't work even with specified TWRP
no wifi fresh install using the twrp specified SMT531 .
waze magma said:
no wifi fresh install using the twrp specified SMT531 .
Click to expand...
Click to collapse
Fixed the prob my self by flashing the modem and bootloader .
waze magma said:
Fixed the prob my self by flashing the modem and bootloader .
Click to expand...
Click to collapse
Please tell what modem and bootloader are you flashed?
I used this TWRP androidfilehost.com/?fid=24052804347828381 to wipe and flash ROM, and flashed this CP & BL androidfilehost.com/?fid=817550096634744770 via Odin, but wifi still doesn't want to turn on
N2off said:
Please tell what modem and bootloader are you flashed?
I used this TWRP androidfilehost.com/?fid=24052804347828381 to wipe and flash ROM, and flashed this CP & BL androidfilehost.com/?fid=817550096634744770 via Odin, but wifi still doesn't want to turn on
Click to expand...
Click to collapse
they are specified in the post, I used the same as yours and it works perfectly, but nothing special in the rom it's a fully rooted stock rom with some bugs and that's all.
https://www.androidfilehost.com/?fid=817550096634744770
wi fi
does your rom have wi fi problem where it wont turn on
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS THREAD REPLACE BY : https://forum.xda-developers.com/ga...opment/rom-t3704521/post74502648#post74502648
COMPLETELY FIXED! NO MORE BOOTLOOP OR NO OS PROBLEM! (IF YOU RECIEVE NO OS ITS NO BIGGIE!! JUST FOLLOW POST 3! I VERIFIED THE ROM WORKS ON MY OWN S8 THIS TIME!! "TWRP THIS ZIP IS CORRUPT" FULLY FIXED (CAUSED BY ORIGINAL V3 CORRUPT DURING DOWNLOAD!!))
ROM SHOULD BE FIXED NOW! I PUSHED A UPDATE TO HOPEFULLY FIX ALL "NO OS" ISSUES!
IF PERSISTS AGAIN, TRY MY FIX AGAIN!! LAST UPDATE WAS NOT FLASHING SYSTEM.IMG PROPERLY!!
SAMSUNG OREO BETA 2 CUSTOM ROM BY IQBAL.SAREEM! ANDROID 8.0.0 OREO ! (FULL DEODEX) TWEAKS ADDED!
DOWNLOAD: VIEW MY RES 1 post
FEATURE:
LOCK SCREEN BOOTLOOP BUG WHEN SECURITY: FIXED!! NO ISSUES IN THIS ROM!!
ADAWAY INCLUDED IN ROM TWEAK
NOTE 8 STYLE ROM
ROOTED
FULL DEODEX
KERNEL TWEAKS IN ROM TWEAK
KNOX 0X0 STATUS just small software tweak (S-HEALTH REPAIR AND OTHER!!)
WORKING WITH DUAL SIM BOTH S8 AND S8+ (PLEASE EXYNOS ONLY!!)
THIS WILL NEED A WIPE TO WORK!! PLEASE BACKUP IF YOU WANT THIS!!
Working: everything :good:
QUALITY: HIGH
TO INSTALL :
erase internal storage + data + cache + system
reboot recovery
install iqbal oreo custom v3.zip using install in twrp and click on my file after finding it in twrp install menu
swipe to install
THEN install v4 addon of iqbal oreo custom
swipe to install that
turn off and turn on your mobile phone
:good::good::good:
credit to iqbal_sareem for creating this rom
ENJOY MAN
DOWNLOAD FIXED V3 (FLASH THIS ONE FIRST (BIG FILE)): https://www.mediafire.com/file/kuq9..._flashable_s8_s8+_COMPLETE_ROM-V3-Working.zip
DOWNLOAD V4 (ADDON TO V3) : https://www.mediafire.com/file/c7he6e78uwz3chj/iqbal_OREO_flashable_s8_s8+_V4_mandatory_addon.zip
YOU MUST flash v4 addon RIGHT after flashing v3!! before first boot! very important!
links again if above not work
https://www.mediafire.com/file/kuq9..._flashable_s8_s8+_COMPLETE_ROM-V3-Working.zip <<< complete rom working v3
https://www.mediafire.com/file/c7he6e78uwz3chj/iqbal_OREO_flashable_s8_s8+_V4_mandatory_addon.zip <<<<- v4
IMPORTANT FOR "NO OS INSTALLED TWRP MESSAGE (PEOPLE WITH THIS ISSUE):
HOW TO:
wipe internal + data + system + caches
flash oreo iqbal sareem custom in twrp using install
turn off and on your phone back into twrp
flash iqbal sareem custom again WITHOUT WIPING
turn off recovery and turn on phone normally and it will work fine!!
REMEMBER THIS IS ONLY FOR PEOPLE HAVING THIS ISSUE!! EVERYONE WITHOUT SKIP THIS POST PLEASE!!
res.. JUST IN case almost forgot reserved post haha would be sad if i need to add more later without my reserved posts.. :good:
don't work for me NO OS INSTALLED i tried ur method
khriiza said:
don't work for me NO OS INSTALLED i tried ur method
Click to expand...
Click to collapse
same here
same here
The OS not installed is the same issue myself and others were having with the other Oreo beta 2 ROM thread.
Try flashing the ROM, reboot into recovery again, and flash the ROM again straight away.
the phone did not turn on
efsanevii said:
the phone did not turn on
Click to expand...
Click to collapse
No OS installed fix <<--
In TWRP Terminal enter: echo SYSTEMLESS=true>>/data/.supersu
then flash SuperSU again or flash ROM again.
hochocnua said:
No OS installed fix <<--
In TWRP Terminal enter: echo SYSTEMLESS=true>>/data/.supersu
then flash SuperSU again or flash ROM again.
Click to expand...
Click to collapse
it was not bro
this rom is not deodexed ... then it's the same by @SoLdieR9312 with system.img extracted
Carotix said:
this rom is not deodexed ... then it's the same by @SoLdieR9312 with system.img extracted
Click to expand...
Click to collapse
Won't even boot with extracted system.img because symlinks and permissions are wrong
SoLdieR9312 said:
Won't even boot with extracted system.img because symlinks and permissions are wrong
Click to expand...
Click to collapse
then there are not permissions and the script is completely wrong
this thread should be closed
installation runs less then 10 sec, stuck at bootlogo, the original from @SoLdieR9312 works fine for me.
khriiza said:
don't work for me NO OS INSTALLED i tried ur method
Click to expand...
Click to collapse
beanbean50 said:
same here
Click to expand...
Click to collapse
joggi34 said:
same here
Click to expand...
Click to collapse
efsanevii said:
it was not bro
Click to expand...
Click to collapse
JasonMason said:
installation runs less then 10 sec, stuck at bootlogo, the original from @SoLdieR9312 works fine for me.
Click to expand...
Click to collapse
bros please check out V2 download link! all these issues should hopefully be fixed! if they still arent fixed i will remake the rom fully and edit the way the tweaks were added
i pushed a update to solve system.img not flashing good
for anyone continuing to have the no os issues please try the fix i provided in my reserved posts again. thanks for reading guys. if my rom still doesnt work i will remake it for you guys
JasonMason said:
installation runs less than 10 sec, stuck at bootlogo, the original from @SoLdieR9312 works fine for me.
Click to expand...
Click to collapse
the same with V2 bro.
TWEAKS ADDED=is a control ROM or something like that?
bro v2 bootlop :S