[Q&A] [ROM] kk 4.4.4 [N900PVPUDNK4] NO KNOX [DEODEX] - Sprint Samsung Galaxy Note 3

Q&A for [ROM] kk 4.4.4 [N900PVPUDNK4] NO KNOX [DEODEX]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] kk 4.4.4 [N900PVPUDNK4] NO KNOX [DEODEX]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

update to 4.4.4 missed something
Been on android for years and my old account here is gone so starting anew. I fflashed the new modem and bootloader, everything is good minus one thing. I followed the post since i was on nc5 and forgot to disable my lockscreen. After update i couldnt get into my phone so i did a full reset, factory reset, formatted phone, cleaned dalvic the works and everything works except when i goto assign a lockscreen i can only do swipe or pattern, nothing else works. When i click on pin it goes through and acts like it set but never sets. Im confused, tried 2 different roms from this thread to same effect.

mi3 modem possible?
Im on NC5 with MI3 Modem,
Can I flash the MI3 modem after following the procedure in the OP and still work?
Thanks

First ive been doing this for about 5 years or longer. Im on nk4 stock but wanted to flash your deodex debloated rom. I used twrp to wipe and flash. Everything flashed fine it seemed. It got stuck at the Samsung screen and wouldnt go past it. Any ideas what i need to do to make this work?
Sent from my SM-N900P using XDA Premium HD app

Is it possible to receive OTA notifications on this ROM? Got word that Sprint is pushing 5.0 and wondering if I could catch it. I know it's mostly stock and status usually states official but with the kernel mod I wasn't sure.
Sent from my SM-N900P using Tapatalk 2

Is the Hotspot unlocked on this rom?
Sent from my SM-N900P using XDA Free mobile app

shipolleh said:
Im on NC5 with MI3 Modem,
Can I flash the MI3 modem after following the procedure in the OP and still work?
Thanks
Click to expand...
Click to collapse
Better late than never, no you cannot use MI3 Modem. You need to be on KK.
---------- Post added at 11:12 AM ---------- Previous post was at 11:06 AM ----------
marquan66 said:
Is the Hotspot unlocked on this rom?
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
No it is not, this ROM is basically Stock with exception of being deodexed and having Knox removed. Your best bet is to find a copy of Galaxy Tools v 3.1.5 or v 3.1.8 and that will enable the HotSpot on this ROM.

Related

[Q&A] ★[Rom][VS985_11C][4.4.2] Stock Root Deodex [Nov, 8th]★

Q&A for ★[Rom][VS985_11C][4.4.2] Stock Root Deodex [Nov, 8th]★
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for ★[Rom][VS985_11C][4.4.2] Stock Root Deodex [Nov, 8th]★. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
How To Flash Modem
If I wanted to flash the modem zip how would I do that? Can I flash it from flashify or do i go into TWRP and just install it like a normal zip?
Duskmustache said:
If I wanted to flash the modem zip how would I do that? Can I flash it from flashify or do i go into TWRP and just install it like a normal zip?
Click to expand...
Click to collapse
I flashed the zip in recovery without any trouble.
Sent from my VS985 4G using Tapatalk
I usually use viper4android especially because LG doesn't have any audio effects settings outside of it's music app. (I use Google music) when I go to install it it says check that the Rom is rooted and busyboxed... Any ideas?
Does xposed work with a deodex rom?
TonikJDK said:
Does xposed work with a deodex rom?
Click to expand...
Click to collapse
I have xposed and g3 tweak box working just fine
Sent from my VS985 4G using Tapatalk
I have probably a stupid question. Should I flash the modem first or the ROM or does it even matter? Thanks
Sent from my SCH-I605 using XDA Free mobile app
It doesn't matter.
Sent from my VS985 4G using Tapatalk
trent999 said:
It doesn't matter.
Sent from my VS985 4G using Tapatalk
Click to expand...
Click to collapse
Thank you
Gapps?
Thanks Beans What about gapps? Which version? Any suggestions?
Thank you in advance for you help!
Edit - mod please delete...answered myself. Sorry!
Is there a way to make the install update go away?
timmyd463229 said:
Is there a way to make the install update go away?
Click to expand...
Click to collapse
Freeze it in tibu
thank you...
this is better than 10b im assuming?? was originally on 10b but didnt want to go to 11c because didnt want to get stuck and not to be able to roll back in case i didnt like it.,.. im on liquid smooth had a nandroid backup but wheni formatted my internal i accidentaly erased my nandroid backup couldnt get into download mode to use kdz/tot im hoping this rom or the 10b rom will let me use twrp to go back to stock because the 4k recording doesnt work that good with liquid smooth.. Thank you for all your work you hopefully save me alot of headaches from deleting my nandroid backup..
Other than the deodex, what's different between rooting on a 10b build and taking the OTA? Assuming you've rooted such that it carries over ... which it seems is possible.

[Q&A] [ROM] Stock ZV6 Base - Odex & Deodex

Q&A for [ROM] Stock ZV6 Base - Odex & Deodex
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Stock ZV6 Base - Odex & Deodex. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can this be flashed over my current setup?
Yup. And you can restore back if you want. The only thing that sticks is the modem
Again thanks for all the hard work. Really love the work you do.
OK so I made the leap and dirty flashed this over my current setup. Now I'm having issues with gmail fc'ing. So I uninstalled it thinking that may help. So I tried to install it from the play store and it says "incompatible update"??? Now I can't even sideload it as it tells me " application not installed". Any ideas as to why its doing this?
---------- Post added at 12:59 PM ---------- Previous post was at 12:47 PM ----------
OK so something weird just happened... I went into recovery to fix permissions to see if that would help and gmail was somehow reinstalled... Its still not working but weird.
---------- Post added at 01:04 PM ---------- Previous post was at 12:59 PM ----------
Disregard my previous posts. Its working now.
I'm really liking the ZV6 update! The ROM is smooth and no lag noticed. I was able to pick up cell signal quickly. Great Job!
I flashed this ROM, updated PRL/Profile and then flashed Sac 2. How can I verify that the modem stuck?
klarthur said:
I flashed this ROM, updated PRL/Profile and then flashed Sac 2. How can I verify that the modem stuck?
Click to expand...
Click to collapse
Go to Settings>About>Software. There will be 2 lines of numbers for the modem now.
It'll stick as Sacs doesn't include kernel or modem.
engine95 said:
Go to Settings>About>Software. There will be 2 lines of numbers for the modem now.
It'll stick as Sacs doesn't include kernel or modem.
Click to expand...
Click to collapse
I have two lines for Baseband. Would that be the same thing as the modem? Thank you for your time!
klarthur said:
I have two lines for Baseband. Would that be the same thing as the modem? Thank you for your time!
Click to expand...
Click to collapse
You got it.
A couple of questions. I have bump and twrp installed and rooted on zv4, everything else is stock, except the kernel. I flashed the oversharpening fix kernel. Can I apply this zv6 update to my phone without wiping data and keeping the fixed kernel? Also, should I download the odex or deodexed?
bryster126 said:
A couple of questions. I have bump and twrp installed and rooted on zv4, everything else is stock, except the kernel. I flashed the oversharpening fix kernel. Can I apply this zv6 update to my phone without wiping data and keeping the fixed kernel? Also, should I download the odex or deodexed?
Click to expand...
Click to collapse
You can probably dirty flash. But you will lose the kernel.
Obviously my recommendation is to start from scratch as there's enough changes/fixes in this update to give you issues.
On the odexed vs deodexed, you can Google it for a better explanation. But the simple answer is: Deodexed is way easier to Theme. But Odexed is said to run a bit faster/smoother because it caches the apps. If I remember that right.
Really the choice is up to you. If you want to Theme it, then you'll need deodexed.
engine95 said:
You can probably dirty flash. But you will lose the kernel.
Obviously my recommendation is to start from scratch as there's enough changes/fixes in this update to give you issues.
On the odexed vs deodexed, you can Google it for a better explanation. But the simple answer is: Deodexed is way easier to Theme. But Odexed is said to run a bit faster/smoother because it caches the apps. If I remember that right.
Really the choice is up to you. If you want to Theme it, then you'll need deodexed.
Click to expand...
Click to collapse
I dirty flashed the deodexed version and when i booted the phone up, i keep getting com.android.systemui has stopped, and I can't do anything with the phone. Any fix in mind? For reference, my dpi was changed, so that may be the issue, i'm not sure
bryster126 said:
I dirty flashed the deodexed version and when i booted the phone up, i keep getting com.android.systemui has stopped, and I can't do anything with the phone. Any fix in mind? For reference, my dpi was changed, so that may be the issue, i'm not sure
Click to expand...
Click to collapse
Clean install.
If you used an app to change DPI, then that's probably the issue. You need to wipe data also.
If through the build.prop, then it should've been OK.
You might be able to dirty flash the odexed as that's like factory.
Again, were taking about a factory update so it really should be a clean install.
Anyone having issues with Android Wear and ZV6? When connected to my Moto360 I get running sync loop. The only thing I haven't tried is resetting the phone and watch.
Since the update is already signed by LG, we should be able to use flashify if we have stock recovery and rooted. Is that correct? I know that I should bump TWRP, but I was holding off till lollipop. Just looking to do a dirty flash.
Sent from my LGLS990 using XDA Free mobile app
MikeDroid said:
Since the update is already signed by LG, we should be able to use flashify if we have stock recovery and rooted. Is that correct? I know that I should bump TWRP, but I was holding off till lollipop. Just looking to do a dirty flash.
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
I know Flashify has had issues in the past with these Roms. That's why I recommend doing it in TWRP.
If you have TWRP already why Bump it again?
Maybe I'm misunderstanding.
Edit. I wouldn't think stock recovery would flash this. It's using bits and pieces of ZV6 but not all of it.
And I think the updater-scipt would make it fail. I may be wrong though.
engine95 said:
I know Flashify has had issues in the past with these Roms. That's why I recommend doing it in TWRP.
If you have TWRP already why Bump it again?
Maybe I'm misunderstanding.
Click to expand...
Click to collapse
I'm stock recovery and rooted. Since I haven't bumped TWRP, I thought I could flashify and avoid the 5 second TWRP delay issue by holding off on a custom recovery until we get the stock rooted version of lollipop. You and autoprime have always given solid advice and as such I will take your suggestion.
Sent from my LGLS990 using XDA Free mobile app
MikeDroid said:
I'm stock recovery and rooted. Since I haven't bumped TWRP, I thought I could flashify and avoid the 5 second TWRP delay issue by holding off on a custom recovery until we get the stock rooted version of lollipop. You and autoprime have always given solid advice and as such I will take your suggestion.
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
And again, I'm outta Thanks, so Thank you.
The 5 sec delay I talked about has disappeared for me now. But then I've flash about a million Roms in the last few days.
Others aren't getting the delay at all.
I guess what I'm saying is you don't need to reflash Bump TWRP. It works just fine. Even if you get that slight delay. Eventually it'll go away.
Edit. Get TWRP installed now. Have some fun with whatever Rom you want to try. Personally I'm not expecting Lollipop til next year. If it happens sooner great.
engine95 said:
Get TWRP installed now. Have some fun with whatever Rom you want to try. Personally I'm not expecting Lollipop til next year. If it happens sooner great.
Click to expand...
Click to collapse
I will get TWRP and have some fun when I get back. I'm traveling right now, so I'd rather be at home if something goes awry.
Sent from my LGLS990 using XDA Free mobile app

[Q&A] [ROM] Cleaned & Enhanced Stock Verizon NK1 4.4.2

Q&A for [ROM] Cleaned & Enhanced Stock Verizon NK1 4.4.2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Cleaned & Enhanced Stock Verizon NK1 4.4.2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
nk1 s4 wont reboot without battery pull.
I have cleaned & enhanced stock verizon nk1 4.4.2 Rom. Everything works fine but I have to battery pull to reboot . It locks up with the all the outside lights still on. Any ideas?
shanething said:
I have cleaned & enhanced stock verizon nk1 4.4.2 Rom. Everything works fine but I have to battery pull to reboot . It locks up with the all the outside lights still on. Any ideas?
Click to expand...
Click to collapse
Are you running with Safestrap or MDK bootloader?
shanething said:
I have cleaned & enhanced stock verizon nk1 4.4.2 Rom. Everything works fine but I have to battery pull to reboot . It locks up with the all the outside lights still on. Any ideas?
Click to expand...
Click to collapse
Safestrap
shanething said:
Safestrap
Click to expand...
Click to collapse
The issue must be related to safestrap. I've only tested this rom with MDK bootloader so safestrap isn't officially supported. Have you installed all the NK1 modules for safestrap already?
NK1
Thanks
wifi
For the life of me I can't get the wifi to work. I'm on ss 3.72. I've flashed nc5, ng6 , and nk1 modules, none work.
Also, in Samsung gear app, went I go to Samsung apps, nothing happens.
Thanks
mush2699 said:
For the life of me I can't get the wifi to work. I'm on ss 3.72. I've flashed nc5, ng6 , and nk1 modules, none work.
Also, in Samsung gear app, went I go to Samsung apps, nothing happens.
Thanks
Click to expand...
Click to collapse
Try here
Download the "I545_NK1_Stock_Partitions" file and flash with Odin (AP button) and give that a whirl. My wifi is dead whenever I come back to my stock slot after playing with another custom ROM on Slot 1 (Safestrap). To be honest I haven't a clue why it works (kernels, bootloaders, modems, etc makes my mind melt) but it's worked for me every time.
---------- Post added at 02:26 AM ---------- Previous post was at 02:21 AM ----------
shanething said:
I have cleaned & enhanced stock verizon nk1 4.4.2 Rom. Everything works fine but I have to battery pull to reboot . It locks up with the all the outside lights still on. Any ideas?
Click to expand...
Click to collapse
From the Safestrap thread:
Known Issues:
1) When powering down from the ROM running on a ROM slot the phone will hang. You must long-press the power button to shut down the device. I will debug as time permits.
The long press doesn't work for me and I have to pull the battery, then I go fix my wifi as I posted further down. Or up I guess??
Anybody able to get the mobile hotspot working? Mine says error when I try and use it. I tried to flash the nk1 modules again, but no dice. Running safestrap
Sent from my SCH-I545 using XDA Free mobile app
Debloated OC1 Rom?
First, I am very grateful for muniz_ri's hard work and dedication to get us rooted Lollipop! I also really appreciate all of those who assisted muniz_ri in helping create this lollipop rom. I was curious to know if anyone who was planning on creating a debloated version of this rom. I used Titanium Backup to freeze the Samsung/Verizon bloat. However, there's something knowing that all that bloat is completely removed.
Now that Lollipop is out, is there a ROM of that version that has been modified in the same way as this one?

[Q&A] G900TUVU1DOB1_G900TTMB1DOB1_TMB - Download

Q&A for G900TUVU1DOB1_G900TTMB1DOB1_TMB - Download
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for G900TUVU1DOB1_G900TTMB1DOB1_TMB - Download. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Lollipop galaxy s5 tmobile
Would you lose root?
Would metro pcs galaxy s5 beable to flash this
Blitztex said:
Would you lose root?
Click to expand...
Click to collapse
yes most likely. these tars don't wipe data, but they do disable root and replace a custom recovery with the stock recovery.
---------- Post added at 10:18 PM ---------- Previous post was at 10:14 PM ----------
What are people doing to root and install TWRP with this latest version?I read that CF Auto-root for the 900F on 5.0 was working, is that true for the 900T as well? And is the latest Odin-flashabel TWRP working with this update?
Dr. Fed said:
What are people doing to root and install TWRP with this latest version?I read that CF Auto-root for the 900F on 5.0 was working, is that true for the 900T as well? And is the latest Odin-flashabel TWRP working with this update?
Click to expand...
Click to collapse
Yes the 900t works. My steps posted here: http://forum.xda-developers.com/showthread.php?p=58967459
Sent from my SM-G900T using XDA Free mobile app
your garbage links ,mirrors, are an absolute waste of time.
am i missing A RIDICULOUSLY OBVIOUS SECRET SOCIETY STEP IN *trying* to use THE MOST LIKELY BAD LINKS YOUVE SO GENEROUSLY GIVEN??
IM BAFFLED,....DONT GET IT IVE NEVER HAD SO MUCH GODDAMN TROUBLE ACQUIRING, THEN ATTEMPTING TO OPEN A FILE FROM A LINK.here of all places???? this is outright bull
downloaded from wack mega
attempted to unzip.......FAIL ........"
The link was perfect for me don't know why you're freaking out
OMGitsAlize said:
The link was perfect for me don't know why you're freaking out
Click to expand...
Click to collapse
Sounds like they got up on the wrong side of the bed. I think it is entirely user error.
To the one thay asked about putting Lollipop on the Metro s5 You Can definitely flash the Lollipop tar on a metro s5 But that will make your firmware completely Tmobile based.
Make sure u back up Metro s5 4.4.2 with twrp
Also latest twrp flashed fine on my Tmobile S5 on Lollipop official
Sent from my SM-G900T using XDA Free mobile app
I recently flashed this yesterday with odin. Everything is working great, love it. only issue I have been experiencing isnt really much of an issue but rather just annoying. For some reason I am unable to change any text notification sounds. No matter what I do it is stuck on the whistle notification. Ive even booted back into recovery and tried to wipe cache again and that doesnt seem to work either. I already performed a factory reset in recovery before first boot. So idk. anyone know what the issue could be?
---------------
Sent from my SM-G900T using XDA Free mobile app
Hi I flashed the new lollipop firmware and I keep getting a random popup every so often saying "contacts has stopped working" my contacts work fine it pops up at random times. I wiped cache , flashed back to 4.4.2, flashed back to 5.0, and am still getting this random poPup! Has anyone else experienced this, and is there a solution? Thanks in advance
zmdixon87 said:
Hi I flashed the new lollipop firmware and I keep getting a random popup every so often saying "contacts has stopped working" my contacts work fine it pops up at random times. I wiped cache , flashed back to 4.4.2, flashed back to 5.0, and am still getting this random poPup! Has anyone else experienced this, and is there a solution? Thanks in advance
Click to expand...
Click to collapse
Try either a different kernel or a custom ROM. And Missie site your on lollipop bootloader/modems.
Sent from my SM-G900T using XDA Free mobile app
androidfine16 said:
Try either a different kernel or a custom ROM. And Missie site your on lollipop bootloader/modems.
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
I am stock not rooted. Used Odin to do all flashing after I first did Ota 5.0 update. Without rooting what would you suggest?

[Q&A] [ROM] 100% Stock I545_OC1 - 5.0.1 (MDK)

Q&A for [ROM] 100% Stock I545_OC1 - 5.0.1 (MDK)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] 100% Stock I545_OC1 - 5.0.1 (MDK). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Installing ROM's
I was wondering since the OTA update that gave Galaxy S4 Verizon users Lollipop, is it possible to install this ROM and then download Cyanogenmod? I'm wondering this because there is Loki in this ROM and as far as I know Loki allows you to install any ROM. Correct me if I'm wrong. Also does flashing this ROM give root access, or is there a separate thread for that? Thanks.
Can I just use CWM recovery to flash this and is there any extra steps that I need to do other than the normal that I usually do when flashing Roms. Im on VRUAMDK bootloader and MDK baseband with CWM version 6.0.4 running Hyperdrive rls 21
Sent from my SCH-I545 using XDA Free mobile app
Ridwan Majid said:
I was wondering since the OTA update that gave Galaxy S4 Verizon users Lollipop, is it possible to install this ROM and then download Cyanogenmod? I'm wondering this because there is Loki in this ROM and as far as I know Loki allows you to install any ROM. Correct me if I'm wrong. Also does flashing this ROM give root access, or is there a separate thread for that? Thanks.
Click to expand...
Click to collapse
If your bootloader is not the MDK version the answer is no. Any bootloader after MDK cannot be exploited with loki. If you don't know which boolloader you have type "getprop ro.bootloader" from within a terminal emulator and the results will tell you.
Okay... So I will respectfully move this question from the main thread of the ROM to here.
Has anyone successfully completed a Tap-n-Pay transaction using Google Wallet?
I am not able to have the reader even recognize the 'tap' much less get to the 'pay'. But on OctOL, I am able to complete these same transactions.
bucklyv said:
Okay... So I will respectfully move this question from the main thread of the ROM to here.
Has anyone successfully completed a Tap-n-Pay transaction using Google Wallet?
I am not able to have the reader even recognize the 'tap' much less get to the 'pay'. But on OctOL, I am able to complete these same transactions.
Click to expand...
Click to collapse
Have you tried any other NFC tasks to see if it's NFC or wallet issue?
I don't use tap and pay so can't help there.
Redflea said:
Have you tried any other NFC tasks to see if it's NFC or wallet issue?
I don't use tap and pay so can't help there.
Click to expand...
Click to collapse
So I have a Note II for my work phone and I just turned on SBeam and transferred a file both directions between the two phones... so I guess it is, in fact, a Google Wallet problem, not a phone/kernel problem. At least on the surface anyway.
Thanks, again for the help.
At least you know NFC can work with the ROM in some applications.
Well... I tried it again and it still will not work with Google Wallet.
Bummer.
Any chance that the kernel posted by Surge might have a tweak that can help with the nfc?
I did go back and confirm that the OctOL Lollipop ROM works flawlessly and actually communicates the transaction more quickly than the TW based Hyperdrive ROM.
Transparent Accuweather Widget
Running MDK. Flashed w/TWRP no problems. But I miss the Transparent Accuweather. Tried flashing a couple mods to no avail. Has anyone installed transparent Accuweather mod with this stock rom? Thanx in advance.
Root
Is there a method to root after flashing the stock ROM? I've been looking but I can't find it.
---------- Post added at 08:57 PM ---------- Previous post was at 08:46 PM ----------
The flashfire link says that there is no beta. Is there another link to use or something else that can be done to install Flashfire?
If you're on 5.0.1 stock unrooted, then you're currently out of luck, I believe, no root/roll-back method.
Anyone Else have problems with overheating?
So I am on MDK rooted flashed TWRP after I flashed this rom. Everything is running smoothly however when I use Bluetooth streaming music in my car and navigation the phone gets extremely hot to the point where I get a cooling down error message. Once that happens the phone goes into closing applications and then eventually gets warm enough to shut down. So at first I thought kernel issue, tried with the Hulk kernel same result. Even on different roms such as Dan's GPE lollipop, the phone heats up and shuts down. I have ODIN back to MDK using a .pit file and NAND erased all on this phone and still the heat has been an issue.
i know its common with these phones to overheat, so I contacted Verizon and had two replacements sent which one was running NG6 and the other OC1. Both overheated and shut down doing the same thing as the MDK baseband phone I originally had. Anybody have any similar situation, or have an idea about what I should try to keep these phones from overheating? As a a side note the phones bloat apps were frozen on the replacements as best I could since neither were rooted. I don't know what I should do since I need the phone for navigation and I don't have an upgrade since I still have unlimited data, and seeing as the replacements are all acting the same, that doesn't leave me too many options with getting a phone that actually works.
Thanks for any help and advise on what I should do.
JCTechie said:
So I am on MDK rooted flashed TWRP after I flashed this rom. Everything is running smoothly however when I use Bluetooth streaming music in my car and navigation the phone gets extremely hot to the point where I get a cooling down error message. Once that happens the phone goes into closing applications and then eventually gets warm enough to shut down. So at first I thought kernel issue, tried with the Hulk kernel same result. Even on different roms such as Dan's GPE lollipop, the phone heats up and shuts down. I have ODIN back to MDK using a .pit file and NAND erased all on this phone and still the heat has been an issue.
i know its common with these phones to overheat, so I contacted Verizon and had two replacements sent which one was running NG6 and the other OC1. Both overheated and shut down doing the same thing as the MDK baseband phone I originally had. Anybody have any similar situation, or have an idea about what I should try to keep these phones from overheating? As a a side note the phones bloat apps were frozen on the replacements as best I could since neither were rooted. I don't know what I should do since I need the phone for navigation and I don't have an upgrade since I still have unlimited data, and seeing as the replacements are all acting the same, that doesn't leave me too many options with getting a phone that actually works.
Thanks for any help and advise on what I should do.
Wife had that message, is your phone in the sun when you are having these issues? I have 0 overheating issues and I even use teather. Rooted MDK and wife's is Verizon non rooted.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
SafeStrap question?
If I rooted my device with ss how do I install this ? Not sure about changing over to twrp or how to. and I want to get rid of the custom lock screen at boot up. any help please and thank you in advance . ok just so everyone knows what I am running http://forum.xda-developers.com/galaxy-s4-verizon/development/rom-echoe-rom-v49-tw-lollipop-t3099930
Hi there... Just bought a Verizon S4 for my wife. Don't know anything yet about flashing it with custom rom. Heard about safestrap, locked boot loader... some complicated stuffs I don't mind with my Note 2.<br />
So can someone give me the right steps coming from a stock NK1? Not yet rooted, not yet flashed... all stock...<br />
Thank you in advance.<br />
<br />
Envoyé de mon SM-N910C en utilisant Tapatalk<br />
---------------<br />
<b>Admin Note: this thread has a dedicated questions and answers section which you can access here -->.</b>
Envoyé de mon SM-N910C en utilisant Tapatalk
Known issues - none = wrong!
There is a very major issue. Non MDK users cannot install Viper4Android because SELinux mode cannot be changed to permissive. Spent all day getting this rom installed and working out the kinks only to find out that Viper4Android cannot be installed due to stock kernel SELinux mode not being able to be changed to permissive.
Nevermind I found fix
beavis5706 said:
There is a very major issue. Non MDK users cannot install Viper4Android because SELinux mode cannot be changed to permissive. Spent all day getting this rom installed and working out the kinks only to find out that Viper4Android cannot be installed due to stock kernel SELinux mode not being able to be changed to permissive.
Click to expand...
Click to collapse
Nevermind I found a fix over at http://androiding.how/how-to-fix-viper4android-selinux-policy-issues-on-lollipop/
I used Recovery Flashable zip w/ FlashFire and got Viper4Android working with this deodexed rom.
Tether Mod Deodex?
I couldn't find the answer to this on the main thread or here - last night when I tried to flash the tether mod over the top of the standard rooted-odexed ROM, the phone booted up and immediately started throwing System errors. I was able to factory reset back to stock, but the tether mod obviously didn't work. Does that mod need to be flashed over the deodexed version of this ROM to work? If not, any other ideas on how to make the tether mod work?
Help
Good evening,
I get lost in all this. Here are my properties:
SCH-I545
Baseband: I545VRUEMK2
Number version: JSS15J.I545VRUEMK2
Android Version : 4.3
I would like to know:
1-) How to install a recorvery on the SCH-I545 already rooted with saferoot...
2-) How to know if my bootloader is to dévérouiller and if not how to make him(it) 3-) How then I to install(settle) the ROMA OC1
I am afraid of scrubbing my telephone.
Thank you for your help
---------- Post added at 09:25 PM ---------- Previous post was at 09:21 PM ----------
Good evening,
I get lost in all this. Here are my properties:
SCH-I545
Baseband: I545VRUEMK2
Number version: JSS15J.I545VRUEMK2
I would like to know:
1-) How to installa recorvery on the SCH-I545 already rooted with saferoot...
2-) How to know if my bootloader is to dévérouiller and if not how to make it
3-) How then I to install) the ROM OC1
I am afraid of scrubbing my telephone.
Thank you for your help

Categories

Resources