Hello, i acidentaly flashed the wrong aboot.img on my D620r whit flashify and rebooted, now it only goes in fastboot,
this is what it shows me when i boot my phone on top left and whit lg logo.
[420] fastboot_init()
[520] USB init ept @ 0xffe0000
[540]udc_start()
and when i plug it in, i can see it has simmple android device in windows like this: http://imgur.com/adFaSrY
and this is what ADB shows me : http://imgur.com/pOkKqE5
cans someone plese tell me what to do, i wnated to try this: http://forum.xda-developers.com/showthread.php?t=2800115
but the likns are broken.
EDIT: FIXED IT BY USING RECOVERY MODE IN LG SUPPORT TOOL!
Related
If flashed LG G2 D802 rom on D800/similar OR no recovery, no download, no fastboot OR errors like:
Lg g2 "cross dll" or "device model different" or "fota/laf partion changed" while flashing,
please follow :(Thanks to aftabalam8c2)
http://forum.xda-developers.com/lg-g2/general/lg-g2-cross-dll-device-model-fota-laf-t3003717
also if no download mode, no recovery mode, no fastboot mode follow this:(Thanks to Partager.info)
http://forum.xda-developers.com/showthread.php?t=2582142
if no success, please follow qhsub_bulk mode(its a bit tricky but possible, i did it myself after trying all above):(Thanks to tungkick)
http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627
to get into qhsub_bulk mode: (thanks to Aftab Alam)
remove battery connection inside the mobile, keep usb cable pugged from lg g2 to your windows pc and watch this video
https://www.youtube.com/watch?v=FiofVOqfnxw
helpful video, how to remove logic board(its not require to remove full logic board, just for reference): (Thanks to Paul W)
https://www.youtube.com/watch?v=O12UJMOCx1w
hope your phone comes back to life...
I don't want any donations, just wanted to help, as i spend so many days and nights to bring my phone back to life, after lots of research i am sharing all at one place so you guys can save your time.
Thanks and regards
Abhishek Sharma
Helppp meeee pleaseeee...!!
Hi bro, i was trying to upgrade my firmware via LG PC Suite and it upgraded my firmware to
D80220C on my LG_LS980 now im stuck at LG boot screen ( light keeps blinking ), cant do anything, pleaseeeeeeeeeeee help ASAP!!!
At the back cover it says LS 980 but the phone was showing it as D 802 ( firmware D80220b ) ABOUT PHONE ( im sure its a refurbished set / had no idea before ) , before upgrading it had D80220C , D80220b was installed on it , any solution [ STUCK AT LG LOGO SCREEN ] sorry for my bad english ? and please can you guide me STEP by STEP ( just want it to work again / stock / custom any rom will work for me )
M Tariq Khan said:
Hi bro, i was trying to upgrade my firmware via LG PC Suite and it upgraded my firmware to
D80220C on my LG_LS980 now im stuck at LG boot screen ( light keeps blinking ), cant do anything, pleaseeeeeeeeeeee help ASAP!!!
At the back cover it says LS 980 but the phone was showing it as D 802 ( firmware D80220b ) ABOUT PHONE ( im sure its a refurbished set / had no idea before ) , before upgrading it had D80220C , D80220b was installed on it , any solution [ STUCK AT LG LOGO SCREEN ] sorry for my bad english ? and please can you guide me STEP by STEP ( just want it to work again / stock / custom any rom will work for me )
Click to expand...
Click to collapse
Phone off you hand logo lg
You need short testpoint phone detect qhsusb_bulk and show very partitiont download tool unbrick qualcom 9006 of my download all partitiont img and use tool unbrick qualcom 9006 of my unbrick
If you attack pc detect qhsusb_bulk but no show very partitiont you try unplug cable and inplug attack again( and again) and show partitiont done.Next unbrick
tungkick said:
Phone off you hand logo lg
You need short testpoint phone detect qhsusb_bulk and show very partitiont download tool unbrick qualcom 9006 of my download all partitiont img and use tool unbrick qualcom 9006 of my unbrick
If you attack pc detect qhsusb_bulk but no show very partitiont you try unplug cable and inplug attack again( and again) and show partitiont done.Next unbrick
Click to expand...
Click to collapse
Thankyou, Update : I can go to Download mode, but when i enter into Dwn mode it there is a blackscreen written FASTBOOT, RESET , PORT etc , any idea how to fix it? Model : D-800-32GB
M Tariq Khan said:
Thankyou, Update : I can go to Download mode, but when i enter into Dwn mode it there is a blackscreen written FASTBOOT, RESET , PORT etc , any idea how to fix it? Model : D-800-32GB
Click to expand...
Click to collapse
PHONE of you in fastboot
need download driver fastboot connect pc and install
use fastboot flash all partitiont in cmd
fastboot flash boot boot.img (enter)
fastboot flash aboot aboot.img
fastboot flash tz tz.img
fastboot flash rpm rpm.img
fastboot flash laf laf.img
fastboot flash recovery recovery.img
fastboot flash sbl1 sbl1.img
all file partitione download http://downloads.codefi.re/autoprime/LG/LG_G2/D800/Stock_Firmware/10d_partitions
hi! I'm newbie here. so I have a question for you, I have LG L70 D325 with stock ROM, and I wanna try to Install Custom ROM from here. I did exactly step by step. here's the list of what I did so my phone suddenly bricked
1. Unlocking Bootloader taken from here (Success)
2. Installing SuperSU, BusyBox Installer
3. Downloading the CM12 from here
4. boot to recovery mode to install the Custom ROM. first I do wipe data, then install the ROM. when Installing, there are no error code or notifications so I assumed it's installed. I try to install the Gapps, but failed, so I skipped it. when I reboot my phone, suddenly I got messages on the left top of screen says :
Code:
[840] fastboot_init()
[840] Error: allocating memory for ssd buffer
[860] USB init ept @ 0x7ad0000
[860] udc_start()
and that's all I got. no bootscreen, can't entering the Recovery Mode, on download mode (while connected to PC, it says :
Code:
------------------------------------------------
DOWNLOAD MODE
------------------------------------------------
Loading ......
Press the Volume Up key until you see the download screen
[530] fastboot_init()
[530] Error: allocating memory for ssd buffer
[550] USB init ept @ 0x7ad0000
[570] udc_start()
[680] -- reset --
[680] -- portchange --
[720] -- reset --
[720] --portchange --
I've tried so many ways to restore it. from Laf Multi Tools, using fastboot device (my device won't detect in PC, even in my friend's laptop), etc and still no luck. can someone please help me?
unbrick LG L70
install LG L70 USB driver, and update tool from official LG website.
lg.com/in/support/software-manuals
1.Install the USB DRIVER
2.Install and Execute the LG MOBILE SUPPORT TOOL
3.Connect your phone to PC by using the USB Cable
4.Click “Start Updating” n the LG Mobile Support Tool to begin.
If your phone needs to upgrade, the “Start Updating “ button will be enable.
if your phone is not detect. switch off device,then wait for 10 sec. then press vol + button while plug in usb to phone. it will show a firmware update window. u needed to wait for finish download a file about 930 mb from LG. it will work 100%.hope i can help u.thanks u
#jishnuks007
Not recognizing device
What if it doesn't recognize the device anymore? I don't think it's a USB issue since I installed and reinstalled the correct version multiple times. Perhaps it's a Windows 10 issues? Any other way to fix it?
My Lg G2 (D801) stuck at fastboot screen no download mode after flashing Grola rom. I have done all the steps to recover my g2 , yesterday my phone is showing qhsusb in device manager but i followed xda post and i recovered from that but when i try to enter in download mode within a second it goes to fastboot screen. I extracted laf , boot, etc from kdz rom file and i mistakeny flashed bin format files and after that g2 goes to fastboot screen it detects with pc and it also show in device manager but not able to flash anything like if i enter Fastboot reboot command in cmd it displays(Reboot. . .) and on g2 it shows (Fast : Reboot) but it never performs the reboot , Please help me i appericiate your help.View attachment 3305814
Tarunv1994 said:
My Lg G2 (D801) stuck at fastboot screen no download mode after flashing Grola rom. I have done all the steps to recover my g2 , yesterday my phone is showing qhsusb in device manager but i followed xda post and i recovered from that but when i try to enter in download mode within a second it goes to fastboot screen. I extracted laf , boot, etc from kdz rom file and i mistakeny flashed bin format files and after that g2 goes to fastboot screen it detects with pc and it also show in device manager but not able to flash anything like if i enter Fastboot reboot command in cmd it displays(Reboot. . .) and on g2 it shows (Fast : Reboot) but it never performs the reboot , Please help me i appericiate your help.View attachment 3305814
Click to expand...
Click to collapse
Any update?
I installed stock ROM after having CM11 for some time, when I installed updates for stock, booting stopped at CWM recovery. I used method at http://petesblog.net/blog/how-to-fix-clockworkmod-recovery-boot-loop-issue, 'echo boot | dd of=/dev/block/mmcblk0p3 bs=1 seek=0', and now my phone can't be powered on. Is there a way to fix it?
Please move to other forum, I overlooked it..
Have you ever tried to put your phone into emergency/download mode? Please try to do this and if the phone gets into emergency mode i think that it is possibe to fix it.
To enter in download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
I forgot to say that it is impossible to enter emergency mode. Windows detects the device in the Device manager, but I can do nothing with it. I installed some qualcomm drivers so it's detected as a serial port, but I can't send data ot the phone.
I don't know, what are the partition table for L9 II.
Try to unpack KDZ to IMGs, run Ubuntu (or other linux-based system) and dd if boot.img or aboot.img like in the "LG G2 No emergency mode, no download mode"
Sent from my E430 (L3 II Single)
Not possible because linux does not detect the phone's filesystem (ls /dev/sd*). Also windows detects it as qhsusb_dload.
Hi,
I wanted android 5.1.1 on my device but first I need a working recovery !!!!
Recently I`ve tried to patched bootloader (not unlock ) but my third attempts failed !!! Later I flash using "flashify,rash,cwm.twrp" the LG G2 Twrp Recovery but when booting : a pink screen appears " ... watchdog ...." I concluded that patching bootloader failed. I find an apk: EZ Bootloader Unlocker : I unlock it twice. I went rebooting but screen black... (Device Hard Bricked )
No recovery installed: Cannot get into download Mode/emergency mode
Removing battery + vol up+ connect usb cable to pc. result : a battery with " ? "
I'm running win 10 on pc
Android 5.0.2 on phone
Connect usb when battery inside give a weird directory : " F: " Files such as "verinfo" and "images" present
Could I get stock images and replace them ??? W, COuld Happen ?
Drivers on pc: LG United Drivers( blue icons )
I need a full tutorial concerning my phone how to get in QHSUSB Mode with anything :wires !!!
If I need a new motherboard : where to find it.... warranty is over...can I replave the motherboard by myself ???
I already have lg flashing tools and kdz package for phone....
Need help
Please !!!!