Hello xda-developers Team
I have a big problem. I stay in Austria / Europe and I have bought online a Zopo ZP1000
because there is no zopo dealer in my region.
The phone is 3 months old and can not be recharged . Charge lamp lights always red .
If charger turns away smartphone turns off immediately. Warranty repairs would take
months because manufacturers in China. I would like to fix the problem myself with your help!!
I have made a factory reset, I have bought and used a new battery but the problem persists.
The new full battery appears to 0 % battery capacity. I used different chargers also connected to pc.
Even after several hours on the charger - charge level of 0%
i checked both battery (new and old) with *#*#4636#*#* and it shows
battery charge 0%
battery voltage 0V
battery temp -237° Celsius !!!??
I looked on the internet and found many smartphones have this problem. But I could not
find a solution that fixes the problem.
Is it a software or hardware problem?
What can i do? Do you know the solution to the problem?
I am grateful for any help
sincerly
My Phone:
Modelnummer: Q-Smart ZP1000
Android 4.4.2
Hardware : MT6592
Model : ZP1000
Build number : ZP1000 20140923-183157
Build date UTC : 20140922-083516
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V34.P12, 2014/09/15 19:08
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Mon Sep 22 16:32:56 CST 2014
Uboot build v : ----- sollte root shell
LCD Driver IC : 0-otm1283a_cmi50_zes_hd
Related
Hello everyone,
I have bought an S3 I9300 clone with single MICRO sim of the below specs, the phone had the same problem with any chinese clone : bad network coverage , wifi signal and heat build up .
However, recently I found out that the phone randomly freeze and its screen starts showing a few horizontal lines while flickering and if any audio was running it would sound like white noise , then after 10 seconds it restarts and keep restarting unless I remove the battery then turn it on again.
So, I rooted the cellphone, disabled "window animation scale , transition scale, Force GPU rendering), enabled "Don't keep activites", Installed "A919 Tool" , installed " MTK6577 CPU Governer Switcher" and set governer "on demand" mode with Up threshold 80%, wiped all the phone cache and made a full factory reset and reinstalled " MTK6577 CPU Governer Switcher" but all to no avail. the phone keeps freezing
I can't say that the rate of phone restart kept the same, it decreased some how but the phone is driving me crazy with that freeze issue , So, any suggestion what should I do next?
hereby is the phone specs:
BB Chip: MT6577
MS Board : qishang77_cu_ics2 " or maybe gishang* i dont know"
Modem Ver. : MAUI.11AMD.W12.22.SP.V9.P2. 2012/12/28 13:44
Bar code : A6611301303210 10
Uboot Ver:2010.06
Kernel Ver: 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC)) # 1 SMP PREEMPT wed feb 6 00:12:29 CST 2013
Android ver:4.0.4
SW ver :ALPS.ICS2.MP.V1.9
Custom Build Verno. : release.V2.00
Back Camera: 8MP with weak flash
Touch : Multitouch up to 5 points
Resolution: 960 x 540
Sim card: single microsim
Led Indicator: yes red colored
P.S.: it would be very helpfull if anyone knows what is that phone type "i.e.: it known chinese manufacturer Tinji or HDC or whatever"?
Hi.
I have buy the Samsung Galaxy s4 clone I have some problems.
Dual Core 1.3 Ghz MT6572
RAM: 512 MB ROM: 4 GB
Dual Sim
5 inc IPS screen
4.2.2 android
Problems:
1. when the battery is empty the phone is off I connect charger nothing happends, it charge when phone is on.
2. After charging the phone wont get into deep sleep I need to restart the phone.
3. When I connect the phone with PC nothing happends but the phone is charging.
Is there any whey to fix it ?
Phone rooted with framaroot.
ro.build.id=JDQ39
ro.build.display.id= ALPS.JB3.MP.V1
ro.custom.build.version=I7628.H31B.02.05.A.B-V03.0-0831
MOLY.WR8.W1315.MD.WG.MP.V1 04/07/2013 15:16
Kernel: 3.4.5 ([email protected]) (gcc version 4.6.x-google20120106 (prerelease) (GCC)) #1 SMP PREEMPT Sat Aug 31 19.15.53 CST 2013
Thanks.
?
anybody ?
Friends,
I got this phone to me from a friend to block the pop-up ads and auto updates and auto installtions of unwanted software in this phone. I tired a lot but could not find the original ROM for this phone through out the web. I have connected the phone to PC and when I accessed the phone using MTK DROIDTOOLS, the info shown in that window is as follows.
Hardware : MT6582 (MT8382 is Fake!)
Model : Genius Talk T4
Build number : MT83X2_MR590_MR5902H1CW1.2014053010
Build date UTC : 20140530-020854
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V18, 2013/11/29 20:19
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri May 30 10:03:00 HKT 2014
Uboot build v : -----
LCD Driver IC : 1-hx8389b_dsi_vdo
Except the LCD driver IC, since almost all the info reveals as per GIONEE P4, I tried to install that OS in this mobile and then it got soft-bricked.
Request the developers based on the MTKDROIDTOOLS info, to please provide me a better solution where I can flash through the PC.. (not through SD Card as the mobile is in OFF condition.
Same problem
hello, I have the same problem, the phone is the same. I can not find a firmware because they are practical, it continues to have banner ads. Can someone help me?
You have this issue posted more than once. Thread closed.
Droidriven
Forum Moderator
Hello guys!*
I have a Chinese clone phone. On the cover of the phone logo-Huawei.
Firmware are suitable from elephone p6i.
Problem: Necessary firmware with working main camera or user backup with working main camera. Tried almost all firmwares from others forums on elephone p6i most firmware work good, but not working main camera, the front camera worked well.
Launch the camera app and immediately turned on front camera. Initially when the phone was given worked both cameras, unfortunately didn't do a backup.
In a last time in a firmware ZLRi6 main camera turned on but the display shows only streaks.
Here is the specifications of the phone from MTK droid. Thanks for help!
Hardware : MT6582
Model : P6i
Build number : ALPS.KK1.MP1.V2.13
Build date UTC : 20140731-131953
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V37, 2014/04/01 12:52
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Fri Aug 1 10:29:26 CST 2014
Uboot build v : -----
LCD Driver IC : 0-rm68191_dsi_vdo_lcm_drv
Dear Friends,
i have a 7" cheap tablet from China..
currently stuck on boot logo..
i did wipe all data / factory reset through recovery but the problem persists..
BB Chip : MT6582
MS Board : HONGXI ANG
Modem Ver. : MOLY.WR8.W1315.MD.WG.MP. V12, 2013/10/16 16:03
Bar code : unknown
Build Time : 2013 12 16
Kernel Ver. : 3.4.5 (hx02 @hx02) (gcc version 4.6.x - google 20120106 (prerelease) (GCC)) #1 SMP PREEMPT
Android Ver. : 4.2.2
SW Ver. : ALPS..JB5.Tablet.MP.V1 Custom rom Verno. : M6502
Click to expand...
Click to collapse
Please help me to find a similar/suitable rom to reflash..
i downloaded several roms through google search, but all of them were password protected..
i tried the h/w testing (factory mode with chinese characters), everything seems okay..the rear camera flashes a blitz, the front one captured my face, the speaker is good, battery is good..internal storage detected as 4 GB..RAM testing is good also..
looks like it's a pure software problem..
Any help will be much appreciated